hash
stringlengths 32
32
| doc_id
stringlengths 7
13
| section
stringlengths 3
121
| content
stringlengths 0
3.82M
|
|---|---|---|---|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.3.1 Signalling procedures between PSTN-ISDN-ISDN
|
710301 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PSTN-ISDN-ISDN/Supplementary_services/CFU/710301 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFU. Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 25. Parameter values: CFU active Comments: 710302 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PSTN-ISDN-ISDN/Supplementary_services/CFU/710302 ISDN selection criteria: Test purpose: To verify that a call is released correctly if CFU was not successful if the diverted-to user is busy. ISDN parameter values: CFU active Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 257 Table 25: Overview of Call Forwarding parameters when the forwarding user and the forwarded to user have a S/T reference point PIXIT Value USER B and C have S/T Interfaces Test number variable 1R (Note) 2 3 4 5R (Note) 6R (Note) 7 8R (Note) 9R (Note) 10 11 12 Diverted-to user information parameters (User C) Notification to the user in dependency of the combination of PIXIT value TN&N TN&N TN&N TN&N NTN&N NTN&N NTN&N NTN&N NTN&N NTN&N NTN&N NTN&N 1 Calling CLI presented to diverted-to user Yes No Yes No Yes No Yes No Yes No Yes No 2 Subscription option: Diverting number is released to the diverted-to user: Yes β β β β β β β β 3 Subscription option: Diverting number is released to the diverted-to user: No β β β β 4 Served user has CLIRp β β β β 5 Calling user has CLIRt (def=non-restricted) empty IE or PI=0 β β β 6 Calling user has CLIRt (def=non-restricted) IE with PI=1 or PI=2 β β β 7 Calling user has CLIRt (def=restricted) IE with PI=0 β β β 8 Calling user has CLIRt (def=restricted) empty IE or PI=1 or PI=2 β β β NOTE: The tests marked with R are recommended to be used as regression or interoperability tests. ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 258
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.3.2 Signalling procedures between PSTN-ISDN-PSTN
|
710303 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PSTN-ISDN-PSTN/Supplementary_services/CFU/710303 Selection criteria: Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Calling user information parameters are correctly mapped according to the table 26. Parameter values: CFU active Comments: Table 26: Overview of Call Forwarding parameters PIXIT Value USER B and C has S/T Interfaces Test number variable 1 2 3 Diverted-to user information parameters (User C) Notification to the user in dependency of the combination of PIXIT value NA NA NA Calling CLI presented to diverted-to user Yes No Yes 1 Served user has CLIRp β 2 Calling user: CLIP β β 3 Calling user has CLIRt β 710304 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PSTN-ISDN-PSTN/Supplementary_services/CFU/710304 ISDN selection criteria: Test purpose: To verify that a call is released correctly if CFU was not successful if the diverted-to user is busy. ISDN parameter values: CFU active Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.4 CFB
| |
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.4.1 Signalling procedures between PSTN-ISDN-ISDN
|
710401 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PSTN-ISDN-ISDN/Supplementary_services/CFB/710401 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFB-UDUB. Test purpose: The ISDN user B is in network N2 and is provided with CFB-UDUB. Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 25. Parameter values: CFB-UDUB active Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 259 710402 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PSTN-ISDN-ISDN/Supplementary_services/CFB/710402 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFB-NDUB. Test purpose: The ISDN user B is in network N2 and is provided with CFB-NDUB. Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 25. Parameter values: CFB-NDUB active Comments: 710403 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PSTN-ISDN-ISDN/Supplementary_services/CFB/710403 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFB-UDUB. Test purpose: To verify that a call is released correctly if the diverted-to user is busy. Parameter values: CFB-NDUB active Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.4.2 Signalling procedures between PSTN-ISDN-PSTN
|
710404 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PSTN-ISDN-PSTN/Supplementary_services/CFB/710404 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFB-UDUB. Test purpose: The ISDN user B is in network N2 and is provided with CFB-UDUB. Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 26. Parameter values: CFB-UDUB active Comments: 710405 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PSTN-ISDN-PSTN/Supplementary_services/CFB/710405 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFB-NDUB. Test purpose: The ISDN user B is in network N2 and is provided with CFB-NDUB. Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 26. Parameter values: CFB-NDUB active Comments: 710406 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PSTN-ISDN-PSTN/Supplementary_services/CFB/710406 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFB-UDUB. Test purpose: To verify that a call is released correctly if the diverted-to user is busy. Parameter values: CFB-NDUB active Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 260
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.5 CFNR
| |
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.5.1 Signalling procedures between PSTN-ISDN-ISDN
|
710501 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PSTN-ISDN-ISDN/Supplementary_services/CFNR/710501 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR (option A, late release). Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 25. Parameter values: BC = PIXIT, CF active Comments: 710502 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PSTN-ISDN-ISDN/Supplementary_services/CFNR/710502 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR (option B, immediate release). Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 25. Parameter values: BC = PIXIT, CF active Comments: 710503 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PSTN-ISDN-ISDN/Supplementary_services/CFNR/710503 ISDN selection criteria: Test purpose: To verify that a call is released correctly if CFNR was not successful if the diverted-to user is busy. ISDN parameter values: CFNR active Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.5.2 Signalling procedures between PSTN-ISDN-PSTN
|
710504 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PSTN-ISDN-PSTN/Supplementary_services/CFNR/710504 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR (option A, late release). Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 26. Parameter values: BC = PIXIT, CF active Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 261 710505 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PSTN-ISDN-PSTN/Supplementary_services/CFNR/710505 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR (option B, immediate release). Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 26. Parameter values: BC = PIXIT, CF active Comments: 710506 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PSTN-ISDN-PSTN/Supplementary_services/CFNR/710506 ISDN selection criteria: Test purpose: To verify that a call is released correctly if CFNR was not successful if the diverted-to user is busy. ISDN parameter values: CFNR active Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.6 MCID
|
710601 ISDN reference to: ETSI EN 300 130-1 [14] Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/MCID/710601 Selection criteria: Called user is provided with MCID. Test purpose: Ensure that the call to an ISDN user is registered when the MCID service is requested by the called user in the Active call state. Parameter values: Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.7 CUG
|
710701 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.2.3 Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/CUG/710701 Selection criteria: Called user belongs to a CUG with incoming access not allowed and calling user is not member of the CUG. Test purpose: Ensure that when the called ISDN user belongs to a CUG with incoming access "not allowed" and calling user is not member of the CUG, the call is not established. Parameter values: Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 262
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.8 CCBS
|
710801 ISDN reference to: ETSI EN 300 138-1 [7] Other relevant references: ETSI EN 300 356-1 [18] TSS reference: PSTN-ISDN/Supplementary_services/CCBS/710801 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point at user B. Test purpose: Ensure that user A after the successful CCBS Activation can establish a successful CCBS call to user B. Parameter values: Comments: 710802 ISDN reference to: ETSI EN 300 138-1 [7] Other relevant references: ETSI EN 300 356-1 [18] TSS reference: PSTN-ISDN/Supplementary_services/CCBS/710802 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the T reference point at user B. Test purpose: Ensure that user A after the successful CCBS Activation can establish a successful CCBS call to user B. Parameter values: Comments: 710803 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.2.1 Other relevant references: ETSI EN 300 356-1 [18] TSS reference: PSTN-ISDN/Supplementary_services/CCBS/710803 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that user A after the after the successful CCBS Activation procedure can initiate the deactivation procedure. Parameter values: Comments: 710804 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.2.1 Other relevant references: ETSI EN 300 356-1 [18] TSS reference: PSTN-ISDN/Supplementary_services/CCBS/710804 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point at user B. Test purpose: Ensure that user A after the successful CCBS Activation procedure can initiate the deactivation procedure. Parameter values: Comments: 710805 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.2.1 Other relevant references: ETSI EN 300 356-1 [18] TSS reference: PSTN-ISDN/Supplementary_services/CCBS/710805 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the T reference point at user B. Test purpose: Ensure that user A after the successful CCBS Activation procedure can initiate the deactivation procedure. Parameter values: Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 263 710806 ISDN reference to: ETSI EN 300 138-1 [7] Other relevant references: ETSI EN 300 356-1 [18] TSS reference: PSTN-ISDN/Supplementary_services/CCBS/710806 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that network A cannot accept the CCBS request because the CCBS supplementary service is not available to the destination Parameter values: Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.9 CCNR
|
710901 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/CCNR/710901 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point at user B. Test purpose: Ensure that user A after the successful CCNR Activation can establish a successful CCNR call to user B. Parameter values: Comments: 710902 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/CCNR/710902 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the T reference point at user B. Test purpose: Ensure that user A after the successful CCNR Activation can establish a successful CCNR call to user B. Parameter values: Comments: 710903 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/CCNR/710903 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that user A after the after the successful CCNR Activation procedure can initiate the deactivation procedure. Parameter values: Comments: 710904 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/CCNR/710904 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point at user B. Test purpose: Ensure that user A after the successful CCNR Activation procedure can initiate the deactivation procedure. Parameter values: Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 264 710905 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/CCNR/710905 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the T reference point at user B. Test purpose: Ensure that user A after the successful CCNR Activation procedure can initiate the deactivation procedure. Parameter values: Comments: 710906 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/CCNR/710906 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that network A cannot accept the CCNR request because the CCNR supplementary service is not available to the destination. Parameter values: Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.10 DDI
|
711001 ISDN reference to: ETSI EN 300 403-1 [1], clause 5.1.5.2 Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/DDI/711001 Selection criteria: - Overlap sending at user A. - DDI at user B. Test purpose: Ensure that call establishment using overlap sending is performed correctly when user B supports DDI. Parameter values: Comments: The network in the call state N25 to indicate that an INFORMATION message received from the originating network contained a Called party number information element with the full ISDN number including DDI digits and a Sending complete information element is to be sent to the called user, transmits to user B an INFORMATION message with a valid Called party number information element with the numbering plan identification field set to "ISDN/telephony numbering plan" and type of number field set to "national number", "international number" or "subscriber number" with the full ISDN number including DDI digits contained in the number digits field.
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.11 ECT
|
711101 ISDN reference to: ETSI EN 300 369-1 [19], clause 9 Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/ECT/711101 Selection criteria: Test purpose: The ISDN User B is in network N2 and is provided with ECT using implicit linkage. The PLMN user A and the PLMN user C are in network N1. Ensure that when user B invokes ECT in which the call A-B is in the Active call state - Call Held auxiliary state and the call B-C is in the Active call state a connection between user A and user C is established and the calls A-B and B-C are released. The call clearing procedure of the B-C connection is performed from user B. Parameter values: Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 265 711102 ISDN reference to: ETSI EN 300 369-1 [19], clause 9 Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/ECT/711102 Selection criteria: Test purpose: The ISDN user B is in network N2 and is provided with ECT using implicit linkage. The PLMN user A and PLMN user C are in network N1. Ensure that when user B invokes ECT in which the call A-B is in the Active call sate and the call B-C is in the Active call state - Call Held auxiliary state, a connection between user A and user C is established and the calls A-B and B-C are released. The call clearing procedure of the B-C connection is performed from user C. Parameter values: Comments: 711103 ISDN reference to: ETSI EN 300 369-1 [19], clause 9 Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/ECT/711103 Selection criteria: Test purpose: The ISDN user B is in network N2 and is provided with ECT using implicit linkage. Ensure that when user B invokes ECT in which the call A-B is in the Active call state - Call Held auxiliary state and the call B-C is in the Call Delivered State a connection between user A and user C is established and the calls A-B and B-C are released. When network C receives a CONNECT message from user C, network C shall proceed with the basic call procedure for the user C. The call clearing procedure of the B-C connection is performed from user B. Parameter values: Comments: 711104 ISDN reference to: ETSI EN 300 369-1 [19], clause 9 Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/ECT/711104 Selection criteria: Test purpose: The ISDN user B is in network N2 and is provided with ECT using implicit linkage. Ensure that when user B invokes ECT in which the call A-B is in the Active call state and the call B-C is in the Call Delivered State - Call Held auxiliary state, a connection between user A and user C is established and the calls A-B and B-C are released. When network C receives a CONNECT message from user C, network C shall proceed with the basic call procedure for the user C. The call clearing procedure of the B-C connection is performed from user C. Parameter values: Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.7.12 HOLD
|
711201 ISDN reference to: ETSI EN 300 141-1 [16], clause 7 Other relevant references: ETSI EN 300 196-1 [26], clause 7.1 ETSI TS 183 036 [42], clause 5.2.1 Recommendation ITU-T Q.1912.5 [35], annex B.10 ETSI TS 129 163 [40], clause 7.4.10 TSS reference: PSTN -ISDN/Supplementary_services/HOLD/711201 Selection criteria: The calling user is provided with HOLD. Test purpose: Ensure that the calling user can initiate Call Hold, the called remote user is notified of call hold and that the call can be released from the calling user during the held state. Parameter values: BC = PIXIT Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 266 711202 ISDN reference to: ETSI EN 300 141-1 [16], clause 7 Other relevant references: ETSI EN 300 196-1 [26], clause 7.1 ETSI TS 183 036 [42], clause 5.2.1 Recommendation ITU-T Q.1912.5 [35], annex B.10 ETSI TS 129 163 [40], clause 7.4.10 TSS reference: PSTN-ISDN/Supplementary_services/HOLD/711202 Selection criteria: The calling user is provided with HOLD. Test purpose: Ensure that the calling user can initiate Call Hold the called remote user is notified of call hold, and that the call can be released from the called user in the held state. Parameter values: BC = PIXIT Comments: 711203 ISDN reference to: ETSI EN 300 141-1 [16], clause 7 Other relevant references: ETSI EN 300 196-1 [26], clause 7.1 ETSI TS 183 036 [42], clause 5.2.1 Recommendation ITU-T Q.1912.5 [35], annex B.10 ETSI TS 129 163 [40], clause 7.4.10 TSS reference: PSTN-ISDN/Supplementary_services/HOLD/711203 Selection criteria: The calling user is provided with HOLD. Test purpose: Ensure that the called user can initiate Call Hold, the call can be released from the called user in the held state. Parameter values: BC = PIXIT Comments: 711204 ISDN reference to: ETSI EN 300 141-1 [16], clause 7 Other relevant references: ETSI EN 300 196-1 [26], clause 7.1 ETSI TS 183 036 [42], clause 5.2.1 Recommendation ITU-T Q.1912.5 [35], annex B.10 ETSI TS 129 163 [40], clause 7.4.10 TSS reference: PSTN-ISDN/Supplementary_services/HOLD/711204 Selection criteria: The calling user is provided with HOLD. Test purpose: Ensure that the called user can initiate Call Hold, the call can be released from the calling user in the held state. Parameter values: BC = PIXIT Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.8 Test purposes for PES - ISDN, Basic call
| |
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.8.1 Successful - PES
|
810101 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.2.6 and B.4 Other relevant references: ETSI TS 183 043 [41], clauses 5.2.7 and 5.3.5.5 ETSI TS 183 036 [42], clause 5.1.2 ETSI EN 300 899-1 [37], clause 2.2 Recommendation ITU-T Q.699 [24], clause 2.2 TSS reference: PES-ISDN/Basic_call/Successful/810101 Selection criteria: Test purpose: Ensure that call is delivered to the called ISDN user with the Bearer capability information element indicating "3,1 kHz audio". During call establishment a Progress indicator information element shall be included in the SETUP message sent to the called user with progress description value #1 "call is not end-to-end ISDN". Parameter values: SETUP: BC = 3,1 kHz audio; PI#1 "call is not end-to-end ISDN" Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 267 810101A ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.2.6 and B.4 Other relevant references: ETSI TS 183 043 [41], clauses 5.2.7 and 5.3.5.5 ETSI TS 183 036 [42], clause 5.1.2 ETSI EN 300 899-1 [37], clause 2.2 Recommendation ITU-T Q.699 [24], clause 2.2 TSS reference: PES-ISDN/Basic_call/Successful/810101A Selection criteria: PSTN XML is not supported from the called AGW/VGW Test purpose: Ensure that call is delivered to the called ISDN user with the Bearer capability information element indicating "3,1 kHz audio". During call establishment a Progress indicator information element shall be included in the SETUP message sent to the called user with progress description value #1 "call is not end-to-end ISDN". Parameter values: SETUP: BC = 3,1 kHz audio; PI#1 "call is not end-to-end ISDN" Comments: 810102 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clauses 5.2.7 and 5.3.5.5 ETSI TS 183 036 [42], clause 5.1.2 ETSI EN 300 899-1 [37], clause 2.2 Recommendation ITU-T Q.699 [24], clause 2.2 TSS reference: PES-ISDN/Basic_call/Successful/810102 Selection criteria: Test purpose: Ensure that the clearing procedure is performed correctly when the calling user clears the call after answering. Parameter values: SETUP: BC = 3,1 kHz audio; PI#1 "call is not end-to-end ISDN" Comments: 810103 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clauses 5.2.7 and 5.3.5.5 ETSI TS 183 036 [42], clause 5.1.2 ETSI EN 300 899-1 [37], clause 2.2 Recommendation ITU-T Q.699 [24], clause 2.2 TSS reference: PES-ISDN/Basic_call/Successful/810103 Selection criteria: Test purpose: Ensure that the clearing procedure is performed correctly when the called ISDN user clears the call after answering. Parameter values: SETUP: BC = 3,1 kHz audio; PI#1 "call is not end-to-end ISDN" Comments: 810104 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clauses 5.2.7 and 5.3.5.5 ETSI TS 183 036 [42], clause 5.1.2 ETSI EN 300 899-1 [37], clause 2.2 Recommendation ITU-T Q.699 [24], clause 2.2 TSS reference: PES-ISDN/Basic_call/Successful/810104 Selection criteria: ISDN = point-to-point Configuration: with DDI; P-Early-Media header supported in early dialogue Test purpose: Ensure that the ISDN user receives a Call Proceeding message when the ISDN User in call state U03 is sending a Call Proceedingmessage. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). Ensure that an early dialogue is established by sending a 183 Session Progress Ensure that in the Call Delivered call state U4 the transfer of tone or announcement on the media channel is performed correctly. ISDN Parameter values called user: SETUP: BC = 3,1 kHz audio; PI#1 "call is not end-to-end ISDN" ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 268
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.8.2 Unsuccessful - PES
|
820101 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clauses 5.2.7 and 5.3.5.5 ETSI TS 183 036 [42], clause 5.1.2 ETSI EN 300 899-1 [37], clause 2.2 Recommendation ITU-T Q.699 [24], clause 2.2 TSS reference: PES-ISDN/Basic_call/Unsuccessful/820101 Selection criteria: Test purpose: Ensure that when the called ISDN user is busy, the calling user receives in-band information that the called user is busy. Parameter values: Comments: 820102 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clauses 5.2.7 and 5.3.5.5 ETSI TS 183 036 [42], clause 5.1.2 ETSI EN 300 899-1 [37], clause 2.2 Recommendation ITU-T Q.699 [24], clause 2.2 TSS reference: PES-ISDN/Basic_call/Unsuccessful/820102 Selection criteria: Test purpose: Ensure that when the called ISDN user terminal is not connected, the calling user receives in-band announcement that the destination is out of order. Parameter values: Comments: 820103 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clauses 5.2.7 and 5.3.5.5 ETSI TS 183 036 [42], clause 5.1.2 ETSI EN 300 899-1 [37], clause 2.2 Recommendation ITU-T Q.699 [24], clause 2.2 TSS reference: PES-ISDN/Basic_call/Unsuccessful/820103 Selection criteria: Test purpose: Ensure that when calling to unallocated ISDN number, the calling user receives in-band information that the called number is unallocated. Parameter values: Comments: 820104 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clauses 5.2.7 and 5.3.5.5 ETSI TS 183 036 [42], clause 5.1.2 ETSI EN 300 899-1 [37], clause 2.2 Recommendation ITU-T Q.699 [24], clause 2.2 TSS reference: PES-ISDN/Basic_call/Unsuccessful/820104 Selection criteria: Multipoint configuration for the called side. Test purpose: Ensure that when the calling user clears before answer from the called ISDN user in a point-to-multipoint access configuration, the call is cleared. Parameter values: Comments: 820105 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clauses 5.2.7 and 5.3.5.5 ETSI TS 183 036 [42], clause 5.1.2 ETSI EN 300 899-1 [37], clause 2.2 Recommendation ITU-T Q.699 [24], clause 2.2 TSS reference: PES-ISDN/Basic_call/Unsuccessful/820105 Selection criteria: Point-to-point configuration for the called side. Test purpose: Ensure that when the calling user clears before answer from the called ISDN user in a point-to-point access configuration, the call is cleared. Parameter values: Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 269 820106 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clauses 5.2.7 and 5.3.5.5 ETSI TS 183 036 [42], clause 5.1.2 ETSI EN 300 899-1 [37], clause 2.2 Recommendation ITU-T Q.699 [24], clause 2.2 TSS reference: PES-ISDN/Basic_call/Unsuccessful/820106 Selection criteria: Test purpose: Ensure that when the called ISDN user is alerted by not answering before timer Q118 expires, the network initiate call clearing. Parameter values: Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9 Test purposes for PES-ISDN, Supplementary services
| |
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.1 CLIP
|
910101 ISDN reference to: ETSI EN 300 092-1 [3], clauses 9.5.1 and 11 Other relevant references: ETSI TS 183 036 [42], clause 5.2.3 TSS reference: PES-ISDN/Supplementary_services/CLIP/910101 Selection criteria: The called (served) user is provided with CLIP. Test purpose: Ensure that the Calling party number information element is network provided and correctly delivered to the called ISDN user or, if the PSTN does not support this service, the presentation indicator indicates "number not available due to interworking". Parameter values: SI = NP, N = international (or N = unknown) Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.2 CLIR
|
910201 ISDN reference to: ETSI EN 300 093-1 [4], clause 9.4.1 Other relevant references: ETSI EN 300 092-1 [3], clause 9.5.1 ETSI TS 183 036 [42], clause 5.2.3 TSS reference: PES-ISDN/Supplementary_services/CLIR/910201 Selection criteria: The calling (served) user is provided with CLIR, the called user with CLIP. Test purpose: Ensure that the Calling party number information element is network provided and correctly delivered to the called user without any digit information or, if the PSTN does not support this service, the presentation indicator indicates "number not available due to interworking". Parameter values: SI = NP, (PI = PR), N = unknown, NPI = unknown Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.3 CFU
| |
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.3.1 Signalling procedures between PES-ISDN-ISDN
|
910301 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PES-ISDN/Supplementary_services/CFU/910301 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFU. Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 25. Parameter values: CFU active Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 270 910302 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PSTN-ISDN-ISDN/Supplementary_services/CFU/910302 ISDN selection criteria: Test purpose: To verify that a call is released correctly if CFU was not successful if the diverted-to user is busy. ISDN parameter values: CFU active Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.3.2 Signalling procedures between PES-ISDN-PES
|
710303 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PES-ISDN-PES/Supplementary_services/CFU/710303 Selection criteria: Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Calling user information parameters are correctly mapped according to the table 26. Parameter values: CFU active Comments: 710304 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PES-ISDN-PSTN/Supplementary_services/CFU/710304 ISDN selection criteria: Test purpose: To verify that a call is released correctly if CFU was not successful if the diverted-to user is busy. ISDN parameter values: CFU active Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.4 CFB
| |
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.4.1 Signalling procedures between PES-ISDN-ISDN
|
910401 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PES-ISDN-ISDN/Supplementary_services/CFB/910401 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFB-UDUB. Test purpose: The ISDN user B is in network N2 and is provided with CFB-UDUB. Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 25. Parameter values: CFB-UDUB active Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 271 910402 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PES-ISDN-ISDN/Supplementary_services/CFB/910402 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFB-NDUB. Test purpose: The ISDN user B is in network N2 and is provided with CFB-NDUB. Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 25. Parameter values: CFB-NDUB active Comments: 910403 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PSTN-ISDN-ISDN/Supplementary_services/CFB/910403 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFB-UDUB. Test purpose: To verify that a call is released correctly if the diverted-to user is busy. Parameter values: CFB-NDUB active Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.4.2 Signalling procedures between PES-ISDN-PES
|
910404 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PES-ISDN-PES/Supplementary_services/CFB/910404 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFB-UDUB. Test purpose: The ISDN user B is in network N2 and is provided with CFB-UDUB. Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 26. Parameter values: CFB-UDUB active Comments: 910405 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PES-ISDN-PES/Supplementary_services/CFB/910405 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFB-NDUB. Test purpose: The ISDN user B is in network N2 and is provided with CFB-NDUB. Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 26. Parameter values: CFB-NDUB active Comments: 910406 ISDN reference to: ETSI EN 300 207-1 [12] Other relevant references: TSS reference: PES-ISDN-PES/Supplementary_services/CFB/910406 Selection criteria: The user A and the user C are in PSTN. The user B is in the ISDN and is provided with CFB-UDUB. Test purpose: To verify that a call is released correctly if the diverted-to user is busy. Parameter values: CFB-NDUB active Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 272
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.5 CFNR
| |
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.5.1 Signalling procedures between PES-ISDN-ISDN
|
910501 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PES-ISDN-ISDN/Supplementary_services/CFNR/910501 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR (option A, late release). Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 25. Parameter values: BC = PIXIT, CF active Comments: 910502 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PES-ISDN-ISDN/Supplementary_services/CFNR/910502 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR (option B, immediate release). Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 25. Parameter values: BC = PIXIT, CF active Comments: 910503 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PES-ISDN-ISDN/Supplementary_services/CFNR/910503 ISDN selection criteria: Test purpose: To verify that a call is released correctly if CFNR was not successful if the diverted-to user is busy. ISDN parameter values: CFNR active Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.5.2 Signalling procedures between PES-ISDN-PES
|
910504 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PES-ISDN-PES/Supplementary_services/CFNR/910504 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR (option A, late release). Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 26. Parameter values: BC = PIXIT, CF active Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 273 910505 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PES-ISDN-PSTN/Supplementary_services/CFNR/910505 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR (option B, immediate release) Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 26. Parameter values: BC = PIXIT, CF active Comments: 910506 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: PES-ISDN-PES/Supplementary_services/CFNR/910506 ISDN selection criteria: Test purpose: To verify that a call is released correctly if CFNR was not successful if the diverted-to user is busy. ISDN parameter values: CFNR active Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.6 MCID
|
910601 ISDN reference to: ETSI EN 300 130-1 [14] Other relevant references: TSS reference: PES-ISDN/Supplementary_services/MCID/910601 Selection criteria: Called user is provided with MCID. Test purpose: Ensure that the call to an ISDN user is registered when the MCID service is requested by the called user in the Active call state. Parameter values: Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.7 CUG
|
910701 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.2.3 Other relevant references: TSS reference: PES-ISDN/Supplementary_services/CUG/910701 Selection criteria: Called user belongs to a CUG with incoming access not allowed and calling user is not member of the CUG. Test purpose: Ensure that when the called ISDN user belongs to a CUG with incoming access "not allowed" and calling user is not member of the CUG, the call is not established. Parameter values: Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.8 CCBS
|
910801 ISDN reference to: ETSI EN 300 138-1 [7] Other relevant references: ETSI EN 300 356-1 [18] TSS reference: PES-ISDN/Supplementary_services/CCBS/910801 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point at user B. Test purpose: Ensure that user A after the successful CCBS Activation can establish a successful CCBS call to user B. Parameter values: Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 274 910802 ISDN reference to: ETSI EN 300 138-1 [7] Other relevant references: ETSI EN 300 356-1 [18] TSS reference: PES-ISDN/Supplementary_services/CCBS/910802 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the T reference point at user B. Test purpose: Ensure that user A after the successful CCBS Activation can establish a successful CCBS call to user B. Parameter values: Comments: 910803 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.2.1 Other relevant references: ETSI EN 300 356-1 [18] TSS reference: PES-ISDN/Supplementary_services/CCBS/910803 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that user A after the after the successful CCBS Activation procedure can initiate the deactivation procedure. Parameter values: Comments: 910804 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.2.1 Other relevant references: ETSI EN 300 356-1 [18] TSS reference: PES-ISDN/Supplementary_services/CCBS/910804 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point at user B. Test purpose: Ensure that user A after the successful CCBS Activation procedure can initiate the deactivation procedure. Parameter values: Comments: 910805 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.2.1 Other relevant references: ETSI EN 300 356-1 [18] TSS reference: PSTN-ISDN/Supplementary_services/CCBS/910805 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the T reference point at user B. Test purpose: Ensure that user A after the successful CCBS Activation procedure can initiate the deactivation procedure. Parameter values: Comments: 910806 ISDN reference to: ETSI EN 300 138-1 [7] Other relevant references: ETSI EN 300 356-1 [18] TSS reference: PSTN-ISDN/Supplementary_services/CCBS/910806 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that network A cannot accept the CCBS request because the CCBS supplementary service is not available to the destination. Parameter values: Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 275
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.9 CCNR
|
910901 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/CCNR/910901 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point at user B. Test purpose: Ensure that user A after the successful CCNR Activation can establish a successful CCNR call to user B. Parameter values: Comments: 910902 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: PES-ISDN/Supplementary_services/CCNR/910902 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the T reference point at user B. Test purpose: Ensure that user A after the successful CCNR Activation can establish a successful CCNR call to user B. Parameter values: Comments: 910903 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: PES-ISDN/Supplementary_services/CCNR/910903 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that user A after the after the successful CCNR Activation procedure can initiate the deactivation procedure. Parameter values: Comments: 910904 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: PES-ISDN/Supplementary_services/CCNR/910904 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point at user B. Test purpose: Ensure that user A after the successful CCNR Activation procedure can initiate the deactivation procedure. Parameter values: Comments: 910905 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: PES-ISDN/Supplementary_services/CCNR/910905 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the T reference point at user B. Test purpose: Ensure that user A after the successful CCNR Activation procedure can initiate the deactivation procedure. Parameter values: Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 276 910906 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: PES-ISDN/Supplementary_services/CCNR/910906 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that network A cannot accept the CCNR request because the CCNR supplementary service is not available to the destination. Parameter values: Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.10 DDI
|
911001 ISDN reference to: ETSI EN 300 403-1 [1], clause 5.1.5.2 Other relevant references: TSS reference: PES-ISDN/Supplementary_services/DDI/911001 Selection criteria: - Overlap sending at user A. - DDI at user B. Test purpose: Ensure that call establishment using overlap sending is performed correctly when user B supports DDI. Parameter values: Comments: The network in the call state N25 to indicate that an INFORMATION message received from the originating network contained a Called party number information element with the full ISDN number including DDI digits and a Sending complete information element is to be sent to the called user, transmits to user B an INFORMATION message with a valid Called party number information element with the numbering plan identification field set to "ISDN/telephony numbering plan" and type of number field set to "national number", "international number" or "subscriber number" with the full ISDN number including DDI digits contained in the number digits field.
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.11 ECT
|
911101 ISDN reference to: ETSI EN 300 369-1 [19], clause 9 Other relevant references: TSS reference: PES-ISDN/Supplementary_services/ECT/911101 Selection criteria: Test purpose: The ISDN User B is in network N2 and is provided with ECT using implicit linkage. The PLMN user A and the PLMN user C are in network N1. Ensure that when user B invokes ECT in which the call A-B is in the Active call state - Call Held auxiliary state and the call B-C is in the Active call state a connection between user A and user C is established and the calls A-B and B-C are released. The call clearing procedure of the B-C connection is performed from user B. Parameter values: Comments: 911102 ISDN reference to: ETSI EN 300 369-1 [19], clause 9 Other relevant references: TSS reference: PES-ISDN/Supplementary_services/ECT/911102 Selection criteria: Test purpose: The ISDN user B is in network N2 and is provided with ECT using implicit linkage. The PLMN user A and PLMN user C are in network N1. Ensure that when user B invokes ECT in which the call A-B is in the Active call sate and the call B-C is in the Active call state - Call Held auxiliary state, a connection between user A and user C is established and the calls A-B and B-C are released. The call clearing procedure of the B-C connection is performed from user C. Parameter values: Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 277 911103 ISDN reference to: ETSI EN 300 369-1 [19], clause 9 Other relevant references: TSS reference: PES-ISDN/Supplementary_services/ECT/911103 Selection criteria: Test purpose: The ISDN user B is in network N2 and is provided with ECT using implicit linkage. Ensure that when user B invokes ECT in which the call A-B is in the Active call state - Call Held auxiliary state and the call B-C is in the Call Delivered State a connection between user A and user C is established and the calls A-B and B-C are released. When network C receives a CONNECT message from user C, network C shall proceed with the basic call procedure for the user C. The call clearing procedure of the B-C connection is performed from user B. Parameter values: Comments: 911104 ISDN reference to: ETSI EN 300 369-1 [19], clause 9 Other relevant references: TSS reference: PSTN-ISDN/Supplementary_services/ECT/911104 Selection criteria: Test purpose: The ISDN user B is in network N2 and is provided with ECT using implicit linkage. Ensure that when user B invokes ECT in which the call A-B is in the Active call state and the call B-C is in the Call Delivered State - Call Held auxiliary state, a connection between user A and user C is established and the calls A-B and B-C are released. When network C receives a CONNECT message from user C, network C shall proceed with the basic call procedure for the user C. The call clearing procedure of the B-C connection is performed from user C. Parameter values: Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.9.12 HOLD
|
911201 ISDN reference to: ETSI EN 300 141-1 [16], clause 7 Other relevant references: ETSI EN 300 196-1 [26], clause 7.1 ETSI TS 183 036 [42], clause 5.2.1 Recommendation ITU-T Q.1912.5 [35], annex B.10 ETSI TS 129 163 [40], clause 7.4.10 TSS reference: PES-ISDN/Supplementary_services/HOLD/911201 Selection criteria: The calling user is provided with HOLD. Test purpose: Ensure that the calling user can initiate Call Hold, the called remote user is notified of call hold and that the call can be released from the calling user during the held state. Parameter values: BC = PIXIT Comments: 911202 ISDN reference to: ETSI EN 300 141-1 [16], clause 7 Other relevant references: ETSI EN 300 196-1 [26], clause 7.1 ETSI TS 183 036 [42], clause 5.2.1 Recommendation ITU-T Q.1912.5 [35], annex B.10 ETSI TS 129 163 [40], clause 7.4.10 TSS reference: PES-ISDN/Supplementary_services/HOLD/911202 Selection criteria: The calling user is provided with HOLD. Test purpose: Ensure that the calling user can initiate Call Hold the called remote user is notified of call hold, and that the call can be released from the called user in the held state. Parameter values: BC = PIXIT Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 278 911203 ISDN reference to: ETSI EN 300 141-1 [16], clause 7 Other relevant references: ETSI EN 300 196-1 [26], clause 7.1 ETSI TS 183 036 [42], clause 5.2.1 Recommendation ITU-T Q.1912.5 [35], annex B.10 ETSI TS 129 163 [40], clause 7.4.10 TSS reference: PES-ISDN/Supplementary_services/HOLD/911203 Selection criteria: The calling user is provided with HOLD. Test purpose: Ensure that the called user can initiate Call Hold, the call can be released from the called user in the held state. Parameter values: BC = PIXIT Comments: 911204 ISDN reference to: ETSI EN 300 141-1 [16], clause 7 Other relevant references: ETSI EN 300 196-1 [26], clause 7.1 ETSI TS 183 036 [42], clause 5.2.1 Recommendation ITU-T Q.1912.5 [35], annex B.10 ETSI TS 129 163 [40], clause 7.4.10 TSS reference: PES-ISDN/Supplementary_services/HOLD/911204 Selection criteria: The calling user is provided with HOLD. Test purpose: Ensure that the called user can initiate Call Hold, the call can be released from the calling user in the held state. Parameter values: BC = PIXIT Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.10 Test purposes for ISDN-PES, Basic call
| |
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.10.1 Successful-Speech
|
1010101 ISDN reference to: ETSI EN 300 403-1 [1], clause 5.1.6 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/Speech/1010101 Selection criteria: PSTN XML and early media are supported from the calling AGW/VGW Test purpose: Ensure that the call establishment using en-bloc sending is performed correctly. During call establishment a Progress indicator information element shall be returned to the calling user with progress description value #1 "call is not end-to-end ISDN". Parameter values: BC = speech, no HLC Comments: 1010101A ISDN reference to: ETSI EN 300 403-1 [1], clause 5.1.6 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/Speech/1010101A Selection criteria: PSTN XML is not supported from the calling AGW/VGW Test purpose: Ensure that the call establishment using en-bloc sending is performed correctly. During call establishment a Progress indicator information element shall be returned to the calling user with progress description value #1 "call is not end-to-end ISDN". Parameter values: BC = speech, no HLC Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 279 1010102 ISDN reference to: ETSI EN 300 403-1 [1], clause 5.1.6 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/Speech/1010102 Selection criteria: PSTN XML and early media are supported from the calling AGW/VGW Test purpose: Ensure that the call establishment using overlap sending is performed correctly. During call establishment a Progress indicator information element shall be returned to the calling user with progress description value #1 "call is not end-to-end ISDN". Parameter values: BC = speech, no HLC Comments: 1010103 ISDN reference to: ETSI EN 300 403-1 [1], clause 5.3.3 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/Speech/1010103 Selection criteria: Test purpose: Ensure that the clearing procedure is performed correctly when the calling user clears after answer. Parameter values: BC = speech, no HLC Comments: 1010104 ISDN reference to: ETSI EN 300 403-1 [1], clause 5.3.3 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/Speech/1010104 Selection criteria: Test purpose: Ensure that the clearing procedure is performed correctly when the called user clears after answer. Parameter values: BC = speech, no HLC Comments: 1010105 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41] ETSI TS 183 036 [42] TSS reference: ISDN-PES/Basic_call/Successful/Speech/1010105 Selection criteria: Test purpose: Ensure that the re-answer procedure is performed correctly when the called user clears and re-answers. Parameter values: BC = speech, no HLC Comments: 1010106 ISDN reference to: ETSI EN 300 403-1 [1], clauses 4.5.16 and 5.1.6 Other relevant references: ETSI TS 183 043 [41] ETSI TS 183 036 [42] TSS reference: ISDN-PES/Basic_call/Successful/Speech/1010106 Selection criteria: Test purpose: Support of telephony 3,1 kHz teleservice: Ensure that call establishment can be done with HLC. During call establishment a Progress indicator information element shall be returned to the calling user with progress description value #1 "call is not end-to-end ISDN". Parameter values: BC = speech, HLC = telephony Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 280
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.10.2 Successful-Audio
|
1010201 ISDN reference to: ETSI EN 300 403-1 [1], clause 5.1.6 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/Audio/1010201 Selection criteria: Test purpose: Ensure that the call establishment using en-bloc sending is performed correctly. During call establishment a Progress indicator information element shall be returned to the calling user with progress description value #1 "call is not end-to-end ISDN". Parameter values: BC = 3,1 kHz audio, no HLC Comments: 1010202 ISDN reference to: ETSI EN 300 403-1 [1], clause 5.1.6 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/Audio/1010202 Selection criteria: Test purpose: Ensure that the call establishment using overlap sending is performed correctly. During call establishment a Progress indicator information element shall be returned to the calling user with progress description value #1 "call is not end-to-end ISDN". Parameter values: BC = 3,1 kHz audio, no HLC Comments: 1010203 ISDN reference to: ETSI EN 300 403-1 [1], clause 5.3.3 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/Audio/1010203 Selection criteria: Test purpose: Ensure that the clearing procedure is performed correctly when the calling user clears after answer. Parameter values: BC = 3,1 kHz audio, no HLC Comments: 1010204 ISDN reference to: ETSI EN 300 403-1 [1], clause 5.3.3 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/Audio/1010204 Selection criteria: Test purpose: Ensure that the clearing procedure is performed correctly when the called user clears after answer Parameter values: BC = 3,1 kHz audio, no HLC Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 281 1010205 ISDN reference to: ETSI EN 300 403-1 [1], clauses 4.5.16 and 5.1.6 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/Audio/1010205 Selection criteria: Test purpose: Support of Telefax G2/G3: Ensure that call establishment can be done with HLC. During call establishment a Progress indicator information element shall be returned to the calling user with progress description value #1 "call is not end-to-end ISDN". Parameter values: BC = 3,1 kHz audio, HLC = facsimile group 2/3 Comments: 1010206 ISDN reference to: ETSI EN 300 403-1 [1], clause 4.5.18 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/Audio/1010206 Selection criteria: Test purpose: Support of voice band data via modem: Ensure that call establishment can be done with LLC. During call establishment a Progress indicator information element shall be returned to the calling user with progress description value #1 "call is not end-to-end ISDN". Parameter values: BC = 3,1 kHz audio, LLC = voice band data via modem Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.10.3 Successful-UDI/TA
|
1010301 ISDN reference to: ETSI EN 300 267-1 [2], clause 6.5.2 Other relevant references: ETSI EG 201 018 [i.15], clause 6.3.5 ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/UDI-TA/1010301 Selection criteria: - Telephony UDI-TA teleservice; - Fallback allowed. Test purpose: Ensure that the call establishment is performed correctly when a telephony 7 kHz fallback allowed SETUP message is sent and interworking with PSTN occur. Parameter values: ! SETUP BC1 = speech BC2 = UDI with TA HLC = telephony Comments: telephony 7 kHz fallback allowed SETUP message: A SETUP message containing two BCs, with the first BC = speech and the second SETUP: BC = UDI/TA, a HLC = telephony ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 282 1010302 ISDN reference to: ETSI EN 300 267-1 [2], clause 6.5.2 Other relevant references: ETSI EG 201 018 [i.15], clause 6.3.5 ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Successful/UDI-TA/1010302 Selection criteria: - Videotelephony teleservice; - Fallback allowed. Test purpose: Ensure that the call establishment is performed correctly when a videotelephony 7 kHz fallback allowed SETUP message is sent and interworking with PSTN occurs. Parameter values: ! SETUP BC1 = speech BC2 = UDI with TA HLC1 = telephony HLC2 = videotelephony_ic Comments: videotelephony 7 kHz fallback allowed SETUP message: A SETUP message containing two BCs, with the first BC = speech and the second SETUP: BC = UDI/TA, and two HLCs, with first HLC = telephony and the second HLC = videotelephony_ic and not containing a LLC.
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.10.4 Unsuccessful-Speech
|
1020101 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/Speech/1020101 Selection criteria: Test purpose: Ensure that when the called PSTN user is busy the network transport the cause value #17 "user busy" to the calling user. Parameter values: BC = speech Comments: 1020102 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/Speech/1020102 Selection criteria: Test purpose: Ensure that when calling to a unallocated PSTN number, the network initiate call clearing to the calling user with cause value #1 "unassigned number". Parameter values: BC = speech Comments: 1020103 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/Speech/1020103 Selection criteria: Test purpose: Ensure that when the calling user clears with cause value #16 "normal call clearing" before answer from the called PSTN user, the call is cleared. Parameter values: BC = speech Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 283 1020104 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/Speech/1020104 Selection criteria: Test purpose: Ensure that when the called PSTN user is ringing but not answering, the network initiate call clearing to the calling user with cause value #18 "no user responding" or cause value #19 "no answer from user (user alerted)". Parameter values: BC = speech Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.10.5 Unsuccessful-UDI
|
1020201 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI/1020201 Selection criteria: Test purpose: Ensure that when the calling user requests digital connectivity for a call to a PSTN user, the network initiate call clearing to the calling user with cause value #63 "service or option not available, unspecified" or cause value #65 "bearer capability not implemented". Parameter values: SETUP: BC = UDI Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.10.6 Unsuccessful-audio
|
1020301 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/Audio/1020301 Selection criteria: Test purpose: Ensure that when the called PSTN user is busy the network transport the cause value #17 "user busy" to the calling user. Parameter values: BC = 3,1 kHz audio Comments: 1020302 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/Audio/1020302 Selection criteria: Test purpose: Ensure that when calling to a unallocated PSTN number, the network initiate call clearing to the calling user with cause value #1 "unassigned number". Parameter values: BC = 3,1 kHz audio Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 284 1020303 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/Audio/1020303 Selection criteria: Test purpose: Ensure that when the calling user clears with cause value #16 "normal call clearing" before answer from the called PSTN user, the call is cleared. Parameter values: BC = 3,1 kHz audio Comments: 1020304 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/Audio/1020304 Selection criteria: Test purpose: Ensure that when the called PSTN user is ringing but not answering, the network initiate call clearing to the calling user with cause value #18 "no user responding" or cause value #19 "no answer from user (user alerted)". Parameter values: BC = 3,1 kHz audio Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.10.7 Unsuccessful-UDI/TA
|
1020401 ISDN reference to: ETSI EN 300 267-1 [2], clause 6.5.2 Other relevant references: ETSI EG 201 018 [i.15], clause 6.3.5 ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020401 Selection criteria: - Telephony UDI-TA teleservice; - Fallback not allowed. Test purpose: Ensure that when a telephony 7 kHz fallback not allowed SETUP message is sent to the network, the network shall initiate call clearing to the calling user with cause value #65 "bearer capability not implemented". Parameter values: Comments: telephony 7 kHz fallback not allowed SETUP message: A SETUP message containing a single BCs with the SETUP: BC = UDI/TA and a single HLC = telephony. 1020402 ISDN reference to: ETSI EN 300 267-1 [2], clause 6.5.2 Other relevant references: ETSI EG 201 018 [i.15], clause 6.3.5 ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020402 Selection criteria: - Videotelephony teleservice; - Fallback not allowed. Test purpose: Ensure that when a videotelephony 7 kHz fallback not allowed SETUP message is sent to the network, the network shall initiate call clearing to the calling user with cause value #65 "bearer capability not implemented". Parameter values: Comments: videotelephony 7 kHz fallback not allowed SETUP message: A SETUP message containing a single SETUP: BC = UDI/TA and a single HLC = videotelephony_ic. ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 285 1020403 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.1.4 and G.1.1 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020403 Selection criteria: - Telephony UDI-TA teleservice; - Fallback not allowed. Test purpose: Ensure that, when calling to unallocated number, the network initiate call clearing to the calling user sending a DISCONNECT message containing a PI#8 and the cause value #1 "unassigned number". Parameter values: SETUP: BC = UDI/TA, HLC = telephony Comments: 1020404 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.1.4 and G.1.1 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020404 Selection criteria: - Telephony UDI-TA teleservice; - Fallback not allowed. Test purpose: Ensure that, when the called user is busy and responds with a RELEASE COMPLETE message indicating cause value #17 "user busy", the network initiate call clearing to the calling user sending a DISCONNECT message containing a PI#8 and the cause #17 "user busy". Parameter values: SETUP: BC = UDI/TA, HLC = telephony Comments: 1020405 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.1.4 and G.1.8 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020405 Selection criteria: - Telephony UDI-TA teleservice; - Fallback not allowed. Test purpose: Ensure that, when the called user is not responding, the network initiate call clearing to the calling user sending a DISCONNECT message containing a PI#8 and cause value #18 "no user responding". Parameter values: SETUP: BC = UDI/TA, HLC = telephony Comments: 1020406 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.2.5.4 and G.1.9 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020406 Selection criteria: - Telephony UDI-TA teleservice; - Fallback not allowed. Test purpose: Ensure that when no answer from the called user (but user alerted), the network initiate call clearing sending a DISCONNECT message containing a PI#8 and to the calling user and called user with cause value #19 "no user responding (user alerted)". Parameter values: SETUP: BC = UDI/TA, HLC = telephony Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 286 1020407 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.1.9, 5.3.2 and G.1.10 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020407 Selection criteria: - Telephony UDI-TA teleservice; - Fallback not allowed. Test purpose: Ensure that when the called user rejects the call and responds with a RELEASE COMPLETE message indicating cause value #21 "call rejected", the network initiate call clearing to the calling user sending a DISCONNECT message containing a PI#8 and the cause value #21 "call rejected" to the calling user. Parameter values: SETUP: BC = UDI/TA, HLC = telephony Comments: 1020408 ISDN reference to: ETSI EN 300 403-1 [1], clause G.1.13 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020408 Selection criteria: - Telephony UDI-TA teleservice; - Fallback not allowed. Test purpose: Ensure that when the called user terminal is not connected, the network initiate call clearing to the calling user sending a DISCONNECT message containing a PI#8 and the cause value #27 "destination out of order". Parameter values: SETUP: BC = UDI/TA, HLC = telephony Comments: 1020409 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.2.2 and G.5.7 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020409 Selection criteria: - Telephony UDI-TA teleservice; - Fallback not allowed. Test purpose: Ensure that when the called user is not compatible and responds with a RELEASE COMPLETE message indicating cause value #88 "called user not compatible", the network transport the cause value to the calling user. Parameter values: SETUP: BC = UDI/TA, HLC = telephony Comments: 1020410 ISDN reference to: ETSI EN 300 403-1 [1], clause G.1.6 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PSTN/Basic_call/Unsuccessful/UDI-TA/1020410 Selection criteria: Multipoint configuration for the called side Test purpose: Ensure that when the calling user clears with cause value #16 "normal call clearing" before answer from called user, the network the network initiate call clearing to the calling user sending a DISCONNECT message containing a PI#8 and the cause value #16 "normal call clearing" to the called user. Parameter values: SETUP: BC = UDI/TA, HLC = telephony Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 287 1020411 ISDN reference to: ETSI EN 300 267-1 [2], clause 6.5.2 Other relevant references: ETSI EG 201 018 [i.15], clause 6.3.5 ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020411 Selection criteria: - Telephony UDI-TA teleservice; - Fallback allowed Test purpose: Ensure that when a telephony 7 kHz fallback not allowed SETUP message is sent to the network, the network shall initiate call clearing to the calling user with cause value #65 "bearer capability not implemented". Parameter values: ! SETUP BC1 = speech BC2 = UDI with TA HLC = telephony Comments: 1020412 ISDN reference to: ETSI EN 300 267-1 [2], clause 6.5.2 Other relevant references: ETSI EG 201 018 [i.15], clause 6.3.5 ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020412 Selection criteria: - Videotelephony teleservice; - Fallback allowed. Test purpose: Ensure that when a videotelephony 7 kHz fallback not allowed SETUP message is sent to the network, the network shall initiate call clearing to the calling user with cause value #65 "bearer capability not implemented". Parameter values: ! SETUP BC1 = speech BC2 = UDI with TA HLC = telephony Comments: 1020413 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.1.4 and G.1.1 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020413 Selection criteria: - Telephony UDI-TA teleservice; - Fallback allowed. Test purpose: Ensure that, when calling to unallocated number, the network initiate call clearing to the calling user sending a DISCONNECT message containing a PI#8 and the cause value #1 "unassigned number". Parameter values: ! SETUP BC1 = speech BC2 = UDI with TA HLC = telephony Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 288 1020414 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.1.4 and G.1.1 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020414 Selection criteria: - Telephony UDI-TA teleservice; - Fallback allowed. Test purpose: Ensure that, when the called user is busy and responds with a RELEASE COMPLETE message indicating cause value #17 "user busy", the network initiate call clearing to the calling user sending a DISCONNECT message containing a PI#8 and the cause #17 "user busy". Parameter values: ! SETUP BC1 = speech BC2 = UDI with TA HLC = telephony Comments: 1020415 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.1.4 and G.1.8 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020415 Selection criteria: - Telephony UDI-TA teleservice; - Fallback allowed. Test purpose: Ensure that, when the called user is not responding, the network initiate call clearing to the calling user sending a DISCONNECT message containing a PI#8 and cause value #18 "no user responding". Parameter values: ! SETUP BC1 = speech BC2 = UDI with TA HLC = telephony Comments: 1020416 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.2.5.4 and G.1.9 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020416 Selection criteria: - Telephony UDI-TA teleservice; - Fallback allowed. Test purpose: Ensure that when no answer from the called user (but user alerted), the network initiate call clearing sending a DISCONNECT message containing a PI#8 and to the calling user and called user with cause value #19 "no user responding (user alerted)". Parameter values: ! SETUP BC1 = speech BC2 = UDI with TA HLC = telephony Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 289 1020417 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.1.9, 5.3.2 and G.1.10 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020417 Selection criteria: - Telephony UDI-TA teleservice; - Fallback allowed. Test purpose: Ensure that when the called user rejects the call and responds with a RELEASE COMPLETE message indicating cause value #21 "call rejected", the network initiate call clearing to the calling user sending a DISCONNECT message containing a PI#8 and the cause value #21 "call rejected" to the calling user. Parameter values: ! SETUP BC1 = speech BC2 = UDI with TA HLC = telephony Comments: 1020418 ISDN reference to: ETSI EN 300 403-1 [1], clause G.1.13 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020418 Selection criteria: - Telephony UDI-TA teleservice; - Fallback allowed. Test purpose: Ensure that when the called user terminal is not connected, the network initiate call clearing to the calling user sending a DISCONNECT message containing a PI#8 and the cause value #27 "destination out of order". Parameter values: ! SETUP BC1 = speech BC2 = UDI with TA HLC = telephony Comments: 1020419 ISDN reference to: ETSI EN 300 403-1 [1], clauses 5.2.2 and G.5.7 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Basic_call/Unsuccessful/UDI-TA/1020419 Selection criteria: - Telephony UDI-TA teleservice; - Fallback allowed. Test purpose: Ensure that when the called user is not compatible and responds with a RELEASE COMPLETE message indicating cause value #88 "called user not compatible", the network transport the cause value to the calling user. Parameter values: ! SETUP BC1 = speech BC2 = UDI with TA HLC = telephony Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 290 1020420 ISDN reference to: ETSI EN 300 403-1 [1], clause G.1.6 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PSTN/Basic_call/Unsuccessful/UDI-TA/1020420 Selection criteria: Multipoint configuration for the called side Test purpose: Ensure that when the calling user clears with cause value #16 "normal call clearing" before answer from called user, the network the network initiate call clearing to the calling user sending a DISCONNECT message containing a PI#8 and the cause value #16 "normal call clearing" to the called user. Parameter values: ! SETUP BC1 = speech BC2 = UDI with TA HLC = telephony Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11 Test purposes for ISDN-PES, Supplementary services
| |
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.1 CLIP
|
1110101 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI EN 300 001 [30] ETSI ETS 300 648 [31] ETSI EN 300 659-1 [32] ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Supplementary_services/CLIP/TC1110101 Selection criteria: The called user is provided with CLIP. Test purpose: Ensure that when the Calling party subaddress is provided by the calling user, the Calling party number is correctly delivered to the called (served) user. Parameter values: BC = PIXIT, Calling party subaddress Comments: 1110102 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI EN 300 001 [30] ETSI ETS 300 648 [31] ETSI EN 300 659-1 [32] ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Supplementary_services/CLIP/TC1110102 Selection criteria: The called user is provided with CLIP. Test purpose: Ensure that when no Calling party subaddress is provided by the calling user, the Calling party number information element is network provided and correctly delivered to the called (served) user. Parameter values: BC = PIXIT Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 291 1110103 ISDN reference to: ETSI EN 300 092-1 [3], clause 9.3 Other relevant references: ETSI EN 300 403-1 [1], clauses 4.5.10 and 4.5.11 Recommendation ITU-T Q.931 [38], clauses 4.5.10 and 4.5.11 ETSI TS 183 036 [42], clause 5.2.3 Recommendation ITU-T Q.1912.5 [35], annex B.1 ETSI TS 129 163 [40], clauses 7.4.1 and 7.5.1 TSS reference: ISDN-PES/Supplementary_services/CLIP/1110103 Selection criteria: - The called user is provided with CLIP. - Special arrangement applies. Test purpose: Ensure that when a special arrangement applies and a Calling party number information element and a valid calling number is provided by the calling user, the Calling party number information element with the calling number, is delivered to the called (served) user. Parameter values: BC = PIXIT Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.2 CLIR
|
1110201 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI EN 300 001 [30] ETSI ETS 300 648 [31] ETSI EN 300 659-1 [32] ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Supplementary_services/CLIP/TC1110201 Selection criteria: - the called user is provided with CLIP; - the calling user is provided with CLIR. Test purpose: The calling user is provided with CLIR permanent mode subscription. Ensure that when the Calling party subaddress is provided by the calling user the Calling party number is not delivered to the called user. Parameter values: BC = PIXIT, Calling party subaddress Comments: 1110202 ISDN reference to: ETSI EN 300 403-1 [1] Other relevant references: ETSI EN 300 001 [30] ETSI ETS 300 648 [31] ETSI EN 300 659-1 [32] ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Supplementary_services/CLIP/TC1110202 Selection criteria: - the called user is provided with CLIP, - the calling user is provided with CLIR Test purpose: The calling user is provided with CLIR permanent mode subscription Ensure that when No Calling party subaddress is provided by the calling user the Calling party number is not delivered to the called user. Parameter values: BC = PIXIT Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 292 1110203 ISDN reference to: ETSI EN 300 093-1 [4], clause 9.4.1 Other relevant references: ETSI EN 300 403-1 [1], clauses 4.5.10 and 4.5.11 Recommendation ITU-T Q.931 [38], clauses 4.5.10 and 4.5.11 ETSI TS 183 036 [42], clause 5.2.3 Recommendation ITU-T Q.1912.5 [35], annex B.1 ETSI TS 129 163 [40], clauses 7.4.1 and 7.5.1 ETSI EN 300 092-1 [3], clause A.2 figure 2 TSS reference: ISDN-PES/Supplementary_services/CLIR/1110203 Selection criteria: The calling user is provided with CLIR temporary (PIXIT table 27) mode subscription, the called user with CLIP. Test purpose: Ensure that when the Calling party number is provided by the calling user, with Calling party subaddress, the Calling party number information element is delivered to the called user without any digit information. The Calling party subaddress shall not be present Parameter values: BC = PIXIT, PI = PR, SI = NP, N = unknown, NPI = unknown Comments: Table 27: PIXIT values of CLIRt PIXIT VALUE CLIRt 1 CLIRt (def=present) IE with PI=1 or PI=2 2 CLIRt (def=restrict) empty IE or PI=1 or PI=2
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.3 COLP
|
1110301 ISDN reference to: ETSI EN 300 097-1 [5], clauses 9.5.1 and 11 Other relevant references: ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Supplementary_services/COLP/1110301 Selection criteria: The calling user is provided with COLP. Test purpose: Ensure that the Connected number information element is network provided and correctly delivered to the calling user or, if the PSTN does not support this service, the presentation indicator indicate "number not available due to interworking". Parameter values: BC = PIXIT, SI = NP Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.4 COLR
|
1110401 ISDN reference to: ETSI EN 300 098-1 [6], clauses 9.3.1, 9.4.1 and 11 Other relevant references: ETSI EN 300 097-1 [5], clause 9.5.1 ETSI TS 183 043 [41], clause 5.3.5.5 ETSI TS 183 036 [42], clause 5.1 ETSI EN 300 899-1 [37], clause 3.2 Recommendation ITU-T Q.699 [24], clause 3.2 TSS reference: ISDN-PES/Supplementary_services/COLR/1110401 Selection criteria: - the called PSTN user is provided with COLR; - the calling user is provided with COLP. Test purpose: Ensure that the Connected number information element is network provided and delivered to the calling user without any digit information or, if the PSTN does not support this service, the presentation indicator indicate "number not available due to interworking". Parameter values: BC = PIXIT, (PI = PR), SI = NP, N = unknown, NPI = unknown Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 293
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.5 CUG
|
1110501 ISDN reference to: ETSI EN 300 138-1 [7], clauses 9.2.2 and 9.2.4 Other relevant references: TSS reference: ISDN-PES/Supplementary_services/CUG/1110501 Selection criteria: Orign.: CUG supplementary options: not OA; not ocb; not Preference CUG Term.: ISDN user is not member of a CUG. Test purpose: Ensure that when the calling user belongs to a CUG with outgoing access is: - not allowed; - not outgoing calls barred within the CUG; and - not preferential CUG and the called PSTN user is not member of a CUG, call establishment is not possible and the network initiate call clearing to the calling user with cause value 29 "Facility rejected", return error value "userNotMemberOfCUG". Parameter values: Orign.: BC = PIXIT; Facility IE with CUGCall invoke component: - OARequested set to TRUE - CUG Index included Comments: 1110502 ISDN reference to: ETSI EN 300 138-1 [7], clauses 9.2.2 and 9.2.4 Other relevant references: TSS reference: ISDN-ISDN/Supplementary_services/CUG/1110502 Selection criteria: Orign.: The calling user belongs to a CUG with the following CUG supplementary options: OA; not ocb; not Preference CUG Term.: ISDN user is not member of a CUG. Test purpose: Ensure that when the calling user belongs to a CUG with: - outgoing access allowed; - not outgoing calls barred within the CUG and not preferential CUG; and - the called PSTN user is not member of a CUG, call establishment is not possible and the network initiate call clearing to the calling user with cause value 29 "Facility rejected", return error value "userNotMemberOfCUG". Parameter values: BC = PIXIT; Facility IE with CUGCall invoke component: - OARequested set to TRUE - CUG Index included Comments: 1110503 ISDN reference to: ETSI EN 300 138-1 [7], clauses 9.2.2 and 9.2.4 Other relevant references: TSS reference: ISDN-PES/Supplementary_services/CUG/1110503 Selection criteria: Test purpose: Ensure that when the calling user belongs to a CUG with outgoing access is allowed, not outgoing calls barred within the CUG and not preferential CUG and the and the called PSTN user is not member of a CUG, call establishment to a PSTN user is possible. Parameter values: BC = PIXIT; Facility IE with CUGCall invoke component: - OARequested set to TRUE - CUG Index not included Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 294
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.6 CFU
| |
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.6.1 Signalling procedures at the coincident S and T reference point
|
6.2.11.6.1.1 Signalling procedures between ISDN-PES-ISDN 1110601 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-ISDN/Supplementary_services/CFU/1110601 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 10. Parameter values: BC = PIXIT, CF active Comments: 6.2.11.6.1.2 Signalling procedures between ISDN-PES-PES 1110602 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-PES/Supplementary_services/CFU/1110602 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU. Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 26. Parameter values: BC = PIXIT, CF active Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.7 CFB
| |
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.7.1 Signalling procedures at the coincident S and T reference point
|
6.2.11.7.1.1 Signalling procedures between ISDN-PES-ISDN 1110701 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-ISDN/Supplementary_services/CFB/1110701 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB- UDUB. Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 10. Parameter values: BC = PIXIT, CF active Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 295 1110702 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-ISDN /Supplementary_services/CFB/1110702 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB- NDUB. Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 10. Parameter values: BC = PIXIT, CF active Comments: 1110703 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-ISDN/Supplementary_services/CFB/1110703 ISDN selection criteria: Test purpose: To verify that a call is released correctly if CFB was not successful if the diverted-to user is busy. ISDN parameter values: CFB active Comments: 6.2.11.7.1.2 Signalling procedures between ISDN-PES-PES 1110704 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-PES/Supplementary_services/CFB/1110704 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB- UDUB. Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 24. Parameter values: BC = PIXIT, CF active Comments: 1110705 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-PES/Supplementary_services/CFB/1110705 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB- NDUB Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 24. Parameter values: BC = PIXIT, CF active Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 296 1110706 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-PES/Supplementary_services/CFB/1110706 ISDN selection criteria: Test purpose: To verify that a call is released correctly if CFB was not successful if the diverted-to user is busy. ISDN parameter values: CFB active Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.8 CFNR
| |
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.8.1 Signalling procedures at the coincident S and T reference point
|
6.2.11.8.1.1 Signalling procedures between ISDN-PES-ISDN 1110801 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-ISDN/Supplementary_services/CFNR/1110801 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR (option A, late release). Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 10. Parameter values: BC = PIXIT, CF active Comments: 1110802 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-ISDN/Supplementary_services/CFNR/1110802 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR (option B, immediate release). Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 10. Parameter values: BC = PIXIT, CF active Comments: 1110803 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-ISDN/Supplementary_services/CFNR/1110803 ISDN selection criteria: Test purpose: To verify that a call is released correctly if CFNR was not successful if the diverted-to user is busy. ISDN parameter values: CFNR active Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 297 6.2.11.8.1.2 Signalling procedures between ISDN-PES-PES 1110804 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-PES/Supplementary_services/CFNR/1110804 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR (option A, late release). Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 26. Parameter values: BC = PIXIT, CF active Comments: 1110805 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 6.1, 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-PES/Supplementary_services/CFNR/1110805 Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR (option B, immediate release). Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that the Diverted-to user information parameters and Calling user information parameters are correctly mapped according to the table 26. Parameter values: BC = PIXIT, CF active Comments: 1110806 ISDN ref. to: ETSI EN 300 207-1 [12], clauses 9.2.2 and 9.2.5 Other relevant references: ETSI TS 183 036 [42], clause 5.2.5 Recommendation ITU-T Q.1912.5 [35], annex B.6 ETSI TS 129 163 [40], clause 7.4.6 TSS reference: ISDN-PES-PES/Supplementary_services/CFNR/1110806 ISDN selection criteria: Test purpose: To verify that a call is released correctly if CFNR was not successful if the diverted-to user is busy. ISDN parameter values: CFNR active Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.9 UUS1
|
1110901 ISDN reference to: ETSI EN 300 286-1 [10], clauses 11.2 and 9.1.1.1.2 Other relevant references: TSS reference: ISDN-PES/Supplementary_services/UUS1/1110901 Selection criteria: The calling (served) user is provided with UUS1 implicit request. Test purpose: Ensure that when a User-user information element is included in the SETUP message sent from the calling user, call establishment can be done without User-user information. Parameter values: BC = PIXIT Comments: 1110902 ISDN reference to: ETSI EN 300 286-1 [10], clauses 11.2 and 9.1.1.1.2 Other relevant references: ETSI EN 300 403-1 [1], clause 7.1.3.6 TSS reference: ISDN-PES/Supplementary_services/UUS1/1110902 Selection criteria: The calling (served) user is provided with UUS1 explicit request. Test purpose: Ensure that when the calling user explicit request UUS1 indicating "required", the network initiate call clearing to the calling user indicating cause value #69 "requested facility not implemented" or cause value #29 "facility rejected", and a UUS service 1 rejection with Error value "rejectedByUser". Parameter values: BC = PIXIT Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 298
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.10 CCBS
|
511001 ISDN reference to: ETSI EN 300 138-1 [7] Other relevant references: ETSI EN 300 356-1 [18] TSS reference: ISDN-PES/Supplementary_services/CCBS/511001 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. - Recall option = PIXIT. Test purpose: Ensure that user A can establish a successful CCBS call setup a multipoint configuration exits. Parameter values: BC = PIXIT Comments: 511002 ISDN reference to: ETSI EN 300 138-1 [7] Other relevant references: ETSI EN 300 356-1 [18] TSS reference: ISDN-PES/Supplementary_services/CCBS/511002 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that user A in the call proceeding call state and in the CCBS Call init state, when network B responds to the call with an ALERTING: indication, user A receives an ALERTING message followed by a FACILITY message containing a Facility information element with a cCBSErase invoke indication cCBSEraseReason "normal-unspecified". Parameter values: BC = PIXIT Comments: 511003 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.2.1 Other relevant references: ETSI EN 300 356-1 [18] TSS reference: ISDN-PES/Supplementary_services/CCBS/511003 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that when the network A is in the call state N00 and CCBS Activated state the user can initiate the deactivation procedure. Parameter values: BC = PIXIT Comments: Ensure that the user (when the network A is in the call state N00 and CCBS Activated state), on receipt of a FACILITY message containing a Facility information element with a CCBSDeactivate invoke component including the correct CCBSReference parameter, sends to user A a FACILITY message containing a Facility information element with a CCBSDeactivate return result component with CCBSEraseReason indicating "normal- unspecified" and a Facility message containing a Facility information element with a CCBSerase invoke component. 511004 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.1.4.2 Other relevant references: ETSI EN 300 356-1 [18] TSS reference: ISDN-PES/Supplementary_services/CCBS/511004 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that when the network A is in the call state N00 and CCBS free state the user can initiate the deactivation procedure. Parameter values: BC = PIXIT Comments: Ensure that the user (when the network A is in the call state N00 and CCBS free state), on receipt of a FACILITY message containing a Facility information element with a CCBSDeactivate invoke component including the correct CCBSReference parameter, sends to user A a FACILITY message containing a Facility information element with a CCBSDeactivate return result component with CCBSEraseReason indicating "normal- unspecified" and a Facility message containing a Facility information element with a CCBSerase invoke component. ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 299 511005 ISDN reference to: ETSI EN 300 138-1 [7] Other relevant references: ETSI EN 300 356-1 [18] TSS reference: ISDN-PES/Supplementary_services/CCBS/511005 Selection criteria: - OLE and DLE are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that network A cannot accept the CCBS request because the CCBS supplementary service is not available to the destination. Parameter values: BC = PIXIT Comments: In the Disconnect call state and CCBS Idle state and Retain Active State, on receipt of a FACILITY message containing a Facility information element with a CCBSRequest invoke component including the CallLinkageID, but CCBS is not available to the destination, the user A receives a FACILITY message containing a Facility information element with a CCBSRequest return error component indicating "shortTermDenial". 511006 ISDN reference to: ETSI EN 300 138-1 [7] Other relevant references: ETSI EN 300 356-1 [18] TSS reference: ISDN-PES/Supplementary_services/CCBS/511006 Selection criteria: - Network A and network B are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that if network A is informed that user B is not busy and user A is busy, the network A shall inform user A by sending a CCBSFree invoke component to user A and suspend CCBS processing. Parameter values: BC = PIXIT Comments: 511007 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.4.2.2 Other relevant references: ETSI EN 300 356-1 [18] TSS reference: ISDN-PES/Supplementary_services/CCBS/511007 Selection criteria: - Network A and network B are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. - Recall option = PIXIT. Test purpose: Ensure that if network A cannot accept the request because no B-cannel can selected, network A shall suspend the CCBS request at network B. Parameter values: BC = PIXIT Comments: Ensure that network A in the CCBS free state on receipt of SETUP message containing Bearer capability information element from the original call and a Facility information element with a CCBSCall invoke component including the CCBSReference from the previously sent CCBSRemoteUserFree invoke component, when no B-channels can be selected, the network A sends to user a RELEASE COMPLETE with the cause #34 or #43 and moves to call state N00. Furthermore, network A shall suspend the CCBS request at network B. 511008 ISDN reference to: ETSI EN 300 138-1 [7] Other relevant references: ETSI EN 300 356-1 [18] TSS reference: ISDN-PES/Supplementary_services/CCBS/511008 Selection criteria: - Network A and network B are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. - The network option "CCBS request retention" is set to "yes". Test purpose: Ensure that if network B cannot establish the call because user B is busy again, network B is proceeding with normal call clearing and Network B shall resume monitoring user B for being not busy. Parameter values: BC = PIXIT Comments: Ensure that the network A in the Outgoing Call Proceeding state and CCBS Call Init State, if network B cannot establish the call because user B is busy again, the network A sends to user A a DISCONNECT: not containing a Facility information element with a CCBSErase invoke component. Network B shall resume monitoring user B for being not busy. ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 300 511009 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.4.3.2 Other relevant references: ETSI EN 300 356-1 [18] TSS reference: ISDN-PES/Supplementary_services/CCBS/511009 Selection criteria: - Network A and network B are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. - Network option "CCBS request retention" is set to "no". - Multipoint configuration. Test purpose: Ensure that if network B cannot establish the call because user B is busy again, network B is proceeding with normal call clearing User A can activate the CCBS supplementary service again. Parameter values: BC = PIXIT Comments: Ensure that the network A in the Outgoing Call Proceeding state and CCBS Call Init State, where a multipoint configuration exists, if network B cannot establish the call because user B is busy again, the network A sends to user A a DISCONNECT: or RELEASE COMPLETE message containing a Facility information element with a CallInfoRetain invoke component including a CallLinkageID sends a FACILITY message (UI frame) containing a Facility information element with a CCBSErase invoke component including CCBSEraseREason encoded as "basic-call-failed. User A can activate the CCBS supplementary service again. 511010 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.4.1.2 Other relevant references: ETSI EN 300 356-1 [18] TSS reference: ISDN-PES/Supplementary_services/CCBS/5110010 Selection criteria: - Network A and network B are supporting the CCBS supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that the network A in the Null call state and CCBS Free state, where a multipoint configuration exists, and the T-CCBS3 expires, the network A sends to user A a FACILITY message (UI frame) containing a Facility information element with a CCBSErase invoke component including CCBSEraseREason encoded as "t-CCBS3- timout". Parameter values: BC = PIXIT Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.11 CCNR
|
511001 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: ISDN-PES/Supplementary_services/CCNR/511001 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. - Recall option = PIXIT. - Point-to-multipoint configuration applies. Test purpose: Ensure that when user A has an ALERTING: indication received from network B, user A can activate CCNR and establish a successful CCNR call setup a point-to-multipoint configuration applies. Parameter values: BC = PIXIT Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 301 511002 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: ISDN-PES/Supplementary_services/CCNR/511002 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. - Recall option = PIXIT. - Point-to-multipoint configuration applies. Test purpose: Ensure that when CCNR supplementary service is not activated and the call is cleared after ALERTING: has been sent to user A, user A can activate CCNR and establish a successful CCNR call setup if the point-to-multipoint configuration applies. Parameter values: BC = PIXIT Comments: 511003 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: ISDN-PES/Supplementary_services/CCNR/511003 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that user A in the call proceeding call state and in the CCNR Call init state, when network B has responded to the call with a CONNECT: indication, user A receives a CONNECT message. Has the CCNR request not been deactivated, the user receives a FACILITY message containing a Facility information element with a cCBSErase invoke indication cCBSEraseReason "normal-unspecified". Parameter values: BC = PIXIT Comments: 511004 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: ISDN-PES/Supplementary_services/CCNR/511004 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that when the network A is in the call state N00 and CCNR Activated state, the user can initiate the deactivation procedure. Parameter values: BC = PIXIT Comments: Ensure that the user (when the network A is in the call state N00 and CCNR Activated state), on receipt of a FACILITY message containing a Facility information element with a CCBSDeactivate invoke component including the correct CCBSReference parameter, sends to user A a FACILITY message containing a Facility information element with a CCBSDeactivate return result component. 511005 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: ISDN-PES/Supplementary_services/CCNR/511105 Selection criteria: - OLE and DLE are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that network A cannot accept the CCNR request because the CCBS supplementary service is not available to the destination. Parameter values: BC = PIXIT Comments: In the Disconnect call state and CCNR Idle state and Retain Active State, on receipt of a FACILITY message containing a Facility information element with a CCNRRequest invoke component including the CallLinkageID, but CCBS is not available to the destination, the user A receives a FACILITY message containing a Facility information element with a CCBSRequest return error component indicating "shortTermDenial" or "longTermDenial". ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 302 511006 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: ISDN-PES/Supplementary_services/CCNR/511006 Selection criteria: - Network A and network B are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that if network A is informed that user B is not busy and user A is busy, the network A shall inform user A by sending a CCBSFree invoke component to user A and suspend CCNR processing. Parameter values: BC = PIXIT Comments: 511007 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: ISDN-PES/Supplementary_services/CCNR/511007 Selection criteria: - Network A and network B are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. - Network A supports the specific Recall option. Test purpose: Ensure that if network A cannot accept the request because no B-cannel can be selected, network A shall suspend the CCNR request at network B. Parameter values: BC = PIXIT Comments: Ensure that network A in the CCNR free state on receipt of SETUP message containing Bearer capability information element from the original call and a Facility information element with a CCBSCall invoke component including the CCBSReference from the previously sent CCBSRemoteUserFree invoke component, when no B-channels can be selected, the network A sends to user a RELEASE COMPLETE with the cause #34 or #43 and moves to call state N00. Furthermore, network A shall suspend the CCNR request at network B. 511008 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: ISDN-PES/Supplementary_services/CCNR/511008 Selection criteria: - Network A and network B are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. - Network A supports the global Recall option. Test purpose: Ensure that if network A cannot accept the request because no B-cannel can selected, network A shall send a CCBSStopAlerting invoke component to user A and suspend the CCBS request at network B. Parameter values: BC = PIXIT Comments: Ensure that network A in the call state N00 and CCNR free state, where a multipoint configuration exits, on receipt of SETUP message containing Bearer capability information element (s) from the original call and a Facility information element with a CCBSCall invoke component including the CCBSReference from the previously sent CCBSRemoteUserFree invoke component when no B-channels can be selected. The network A sends FACILITY message (UI frame) containing a facility information element with a CCBSStopAlerting invoke component including the same CCBSReference value and a RELEASE COMPLETE with the cause #34 or #43 and moves to call state N00. Furthermore, network A shall suspend the CCNR request at network B. ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 303 511009 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: ISDN-PES/Supplementary_services/CCNR/511009 Selection criteria: - Network A and network B are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. - The network option "CCBS request retention" is set to "yes". Test purpose: Ensure that if network B cannot establish the call because user B is busy again, network B is proceeding with normal call clearing and Network B shall resume monitoring user B for being not busy. Parameter values: BC = PIXIT Comments: Ensure that the network A in the Outgoing Call Proceeding state and CCBS Call Init State, if network B cannot establish the call because user B is busy again,, the network A sends to user A a DISCONNECT: not containing a Facility information element with a CCBSErase invoke component. Network B shall resume monitoring user B for being not busy. 511010 ISDN reference to: ETSI EN 301 065-1 [29] Other relevant references: TSS reference: ISDN-PES/Supplementary_services/CCNR/511010 Selection criteria: - Network A and network B are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. - Network option "CCBS request retention" is set to "no". Test purpose: Ensure that if network B cannot establish the call because user B is busy again, network B is proceeding with normal call clearing User A can activate the CCNR supplementary service again. Parameter values: BC = PIXIT Comments: 511011 ISDN reference to: ETSI EN 300 138-1 [7], clause 9.4.1.2 Other relevant references: ETSI EN 300 356-1 [18] TSS reference: ISDN-PES/Supplementary_services/CCNR/511011 Selection criteria: - Network A and network B are supporting the CCNR supplementary service and this supplementary service is available to user A. - Signalling procedures at the coincident S and T reference point. Test purpose: Ensure that the network A in the Null call state and CCNR Free state and the T-CCBS3 expires, the network A sends to user A a FACILITY message containing a Facility information element with a CCBSErase invoke component including CCBSEraseREason encoded as "t-CCBS3-timout". Parameter values: BC = PIXIT Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.12 ECT
|
511201 ISDN reference to: ETSI EN 300 369-1 [19], clauses 9.2.1, 9.2.3 and 9.2.4 Other relevant references: TSS reference: ISDN-PES/Supplementary_services/ECT/511201 Selection criteria: ECT Test purpose: User A is in network N1 and is provided with ECT using implicit linkage. User B and user C are in network N2. Ensure that when user A invokes ECT in which the call A-B is in the Active call state - Call Held auxiliary state and the call A-C is in the Active call state a connection between user B and user C is established and the calls A-B and A-C are released. The call clearing procedure of the B-C connection is performed from user B. (user B and user C have presentation allowed - no COLR). Parameter values: BC = PIXIT Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 304 511202 ISDN reference to: ETSI EN 300 369-1 [19], clauses 9.2.1, 9.2.3 and 9.2.4 Other relevant references: TSS reference: ISDN-PES/Supplementary_services/ECT/511202 Selection criteria: ECT Test purpose: User A is in network N1 and is provided with ECT using implicit linkage. User B and user C are in network N2. Ensure that when user A invokes ECT in which the call A-B is in the Active call sate and the call A-C is in the Active call state - Call Held auxiliary state, a connection between user B and user C is established and the calls A-B and A-C are released. The call clearing procedure of the B-C connection is performed from user C. (user B and user C have presentation restricted - COLR). Parameter values: BC = PIXIT Comments: 511203 ISDN reference to: ETSI EN 300 369-1 [19], clause 9 Other relevant references: TSS reference: ISDN-PES/Supplementary_services/ECT/511203 Selection criteria: ECT Test purpose: User A is in network N1 and is provided with ECT using implicit linkage. User B and user C are in network N2. Ensure that when user A invokes ECT in which the call A-B is in the Active call state - Call Held auxiliary state and the call A-C is in the Call Delivered State a connection between user B and user C is established and the calls A-B and A-C are released. When network C receives a CONNECT message from user C, network C shall proceed with the basic call procedure for the user C. The call clearing procedure of the B-C connection is performed from user B. Parameter values: BC = PIXIT Comments: 511204 ISDN reference to: ETSI EN 300 369-1 [19], clause 9 Other relevant references: TSS reference: ISDN-PES/Supplementary_services/ECT/511204 Selection criteria: ECT Test purpose: User A is in network N1 and is provided with ECT using implicit linkage. User B and user C are in network N2. Ensure that when user A invokes ECT in which the call A-B is in the Active call state and the call A-C is in the Call Delivered State - Call Held auxiliary state, a connection between user B and user C is established and the calls A-B and A-C are released. When network C receives a CONNECT message from user C, network C shall proceed with the basic call procedure for the user C. The call clearing procedure of the B-C connection is performed from user C. Parameter values: BC = PIXIT Comments:
|
0d4bbbc351222709301cbcfb436787a7
|
186 001-5
|
6.2.11.13 HOLD
|
511301 ISDN reference to: ETSI EN 300 141-1 [16], clause 7 Other relevant references: ETSI EN 300 196-1 [26], clause 7.1 ETSI TS 183 036 [42], clause 5.2.1 Recommendation ITU-T Q.1912.5 [35], annex B.10 ETSI TS 129 163 [40], clause 7.4.10 TSS reference: ISDN-PES/Supplementary_services/HOLD/511301 Selection criteria: The calling user is provided with HOLD. Test purpose: Ensure that the calling user can initiate Call Hold and that the call can be released from the calling user during the held state. Parameter values: BC = PIXIT Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 305 511302 ISDN reference to: ETSI EN 300 141-1 [16], clause 7 Other relevant references: ETSI EN 300 196-1 [26], clause 7.1 ETSI TS 183 036 [42], clause 5.2.1 Recommendation ITU-T Q.1912.5 [35], annex B.10 ETSI TS 129 163 [40], clause 7.4.10 TSS reference: ISDN-PES/Supplementary_services/HOLD/511302 Selection criteria: The calling user is provided with HOLD. Test purpose: Ensure that the calling user can initiate Call Hold, and that the call can be released from the called user in the held state. Parameter values: BC = PIXIT Comments: 511303 ISDN reference to: ETSI EN 300 141-1 [16], clause 7 Other relevant references: ETSI EN 300 196-1 [26], clause 7.1 ETSI TS 183 036 [42], clause 5.2.1 Recommendation ITU-T Q.1912.5 [35], annex B.10 ETSI TS 129 163 [40], clause 7.4.10 TSS reference: ISDN-PES/Supplementary_services/HOLD/511303 Selection criteria: The calling user is provided with HOLD. Test purpose: Ensure that the called user can initiate Call Hold, the called remote user is notified of call hold, the call can be released from the called user in the held state. Parameter values: BC = PIXIT Comments: 511304 ISDN reference to: ETSI EN 300 141-1 [16], clause 7 Other relevant references: ETSI EN 300 196-1 [26], clause 7.1 ETSI TS 183 036 [42], clause 5.2.1 Recommendation ITU-T Q.1912.5 [35], annex B.10 ETSI TS 129 163 [40], clause 7.4.10 TSS reference: ISDN-PES/Supplementary_services/HOLD/511304 Selection criteria: The calling user is provided with HOLD. Test purpose: Ensure that the called user can initiate Call Hold, the called remote user is notified of call hold, the call can be released from the calling user in the held state. Parameter values: BC = PIXIT Comments: ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 306 Annex A (informative): Bibliography Recommendation ITU-Ts Q.1902.3 and Q.1902.4 (2001): "Specifications of the Bearer Independent Call Control Protocol (BICC)". Recommendation ITU-Ts Q.761 to Q.764 (2000): "Specifications of Signalling System No.7 ISDN User Part (ISDN)". Recommendation ITU-T Q.731.7 (06/1997): "Stage 3 description for number identification supplementary services using Signalling System No. 7: Malicious call identification (MCID)". Recommendation ITU-T Q.732.2 (12/99): "Stage 3 description for call offering supplementary services using Signalling System No. 7: Call diversion services: Call Forwarding Busy (CFB)" Recommendation ITU-T Q.732.3 (12/99): "Stage 3 description for call offering supplementary services using Signalling System No. 7: Call Forwarding No Reply (CFNR)". Recommendation ITU-T Q.732.4 (12/99): "Stage 3 description for call offering supplementary services using Signalling System No. 7: Call Forwarding Unconditional (CFU)". Recommendation ITU-T Q.732.7 (07/96): "Stage 3 description for call offering supplementary services using Signalling System No. 7: Explicit Call Transfer". Recommendation ITU-T Q.733.1 (02/92): "Stage 3 description for call completion supplementary services using Signalling System No. 7: Call waiting (CW)". Recommendation ITU-T Q.733.2 (03/93): "Stage 3 description for call completion supplementary services using Signalling System No. 7: Call hold (HOLD)". Recommendation ITU-T Q.733.3 (06/97): "Stage 3 description for call completion supplementary services using Signalling System No. 7: Completion of calls to busy subscriber (CCBS)". Recommendation ITU-T Q.733.4 (03/93): "Stage 3 description for call completion supplementary services using Signalling System No. 7: Terminal portability (TP)". Recommendation ITU-T Q.733.5 (12/99): "Stage 3 description for call completion supplementary services using Signalling System No. 7: Completion of calls on no reply". Recommendation ITU-T Q.732.5 (12/99): "Stage 3 description for call offering supplementary services using Signalling System No. 7: Call Deflection (CD)". Recommendation ITU-T Q.735.1 (03/93): "Stage 3 description for community of interest supplementary services using Signalling System No. 7: Closed user group (CUG)". Recommendation ITU-T Q.735.6 (07/96): "Stage 3 description for community of interest supplementary services using Signalling System No. 7: Global Virtual Network Service (GVNS)". Recommendation ITU-T Q.736.1 (10/95): "Stage 3 description for charging supplementary services using Signalling System No. 7: International Telecommunication Charge Card (ITCC)". Recommendation ITU-T Q.735.3 (03/93): "Stage 3 description for community of interest supplementary services using Signalling System No. 7: Multi-level precedence and preemption". Recommendation ITU-T Q.736.3 (10/95): "Stage 3 description for charging supplementary services using Signalling System No. 7: Reverse charging (REV)". IETF RFC 2046 (1996): "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types". IETF RFC 3204 (2001): "MIME media types for ISUP and QSIG Objects". IETF RFC 3262 (2002): "Reliability of Provisional Responses in the Session Initiation Protocol (SIP)". IETF RFC 3326 (2002): "The Reason Header Field for the Session Initiation Protocol (SIP)". ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 307 ISO/IEC 9646-2 (1994): "Information technology -- Open Systems Interconnection -- Conformance testing methodology and framework - Part 2: Abstract Test Suite Specification". ISO/IEC 9646-3 (1992): "Conformance testing methodology and framework -- Part 3: The Tree and Tabular Combined Notation". ISO/IEC 9646-3/DAM 1 (1992): "Conformance testing methodology and framework -- Part 3: The Tree and Tabular Combined Notation; Amendment 1: TTCN extensions" ISO/IEC 9646-5 (1994): "Information technology -- Open Systems Interconnection -- Conformance testing methodology and framework -- Part 5: Requirements on test laboratories and clients for the conformance assessment process". ISO/IEC 9646-7 (1994): "Information technology -- Open Systems Interconnection -- Conformance testing methodology and framework -- Part 7: Implementation Conformance Statement". ETSI TS 183 010: "Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); NGN Signalling Control Protocol; Communication HOLD (HOLD) PSTN/ISDN simulation services; Protocol specification". IETF RFC 4967 (2007): "Dial String Parameter for the Session Initiation Protocol Uniform Resource Identifier". ETSI ETS 300 080: "Integrated Services Digital Network (ISDN); ISDN lower layer protocols for telematic terminals". ETSI TS 134 229-1 V10.5.0: "Universal Mobile Telecommunications System (UMTS); LTE; Internet Protocol (IP) multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP); User Equipment (UE) conformance specification; Part 1: Protocol conformance specification (3GPP TS 34.229-1 version 10.5.0 Release 10)". IETF RFC 2833: "RTP Payload for DTMF Digits, Telephony Tones and Telephony Signals". ETSI TS 129 165: "Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Inter-IMS Network to Network Interface (NNI) (3GPP TS 29.165 version 10.18.0 Release 10)". ETSI ETSI TS 186 001-5 V2.4.1 (2022-04) 308 History Document history V2.3.0 November 2015 Publication V2.4.0 September 2020 Publication V2.4.1 April 2022 Publication
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
1 Scope
|
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for SIP-ISUP Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks ES 283 027 [1]. The references [1] and [16] are identical. A further part of the present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma based on the present document.
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
2 References
|
References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity.
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
2.1 Normative references
|
The following referenced documents are necessary for the application of the present document. [1] ETSI ES 283 027 (V2.5.1): "Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) Endorsement of the SIP-ISUP Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks [3GPP TS 29.163 (Release 7), modified]". [2] ETSI TS 129 163: "Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks (3GPP TS 29.163 version 7.9.0 Release 7)". [3] ITU-T Recommendations Q.761 to Q.764 (2000): "Signalling System No.7 ISDN User Part (ISUP)". [4] Void. [5] ITU-T Recommendation Q.850 (1998): "Usage of cause and location in the Digital Subscriber Signalling System No. 1 and the Signalling System No. 7 ISDN User Part". [6] IETF RFC 3261 (2002): "SIP: Session Initiation Protocol". [7] IETF RFC 3312 (2002): "Integration of Resource Management and Session Initiation Protocol (SIP)". [8] ISO/IEC 9646-1 (1994): "Conformance testing methodology and framework - Part 1: General Concepts". [9] ISO/IEC 9646-3 (1992): "Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation". [10] ISO/IEC 9646-7 (1994): "Conformance testing methodology and framework - Part 7: Implementation Conformance Statement". [11] ITU-T Recommendation E.164: "The international public telecommunication numbering plan". [12] Void. ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 7 [13] ITU-T Recommendation Q.939: "Typical DSS 1 service indicator codings for ISDN telecommunications services". [14] ETSI TS 183 008: "Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); PSTN/ISDN simulation services Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR); Protocol specification". [15] Void. [16] ETSI TS 129 527 (V8.2.0): "Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); TISPAN; Endorsement of the SIP-ISUP Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks [3GPP TS 29.163 (Release 7), modified] (3GPP TS 29.527 version 8.2.0 Release 8)". [17] IETF RFC 3556: "Session Description Protocol (SDP) Bandwidth Modifiers for RTP Control Protocol (RTCP) Bandwidth". [18] IETF RFC 3264: "An Offer/Answer Model with Session Description Protocol (SDP)". [19] IETF RFC 4040: "RTP Payload Format for a 64 kbit/s Transparent Call". [20] ITU-T Recommendation F.182: "Operational provisions for the international public facsimile service between subscribers with Group 3 facsimile terminals (Telefax 3)". [21] ITU-T Recommendation F.184: "Operational provisions for the international public facsimile service between subscriber stations with group 4 facsimile terminals (telefax 4)". [22] ITU-T Recommendation F.230: "Service requirements unique to the mixed mode (MM) used within the teletex service". [23] ITU-T Recommendation F.220: "Service requirements unique to the processable mode number eleven (PM11) used within the teletex service". [24] ITU-T Recommendation F.200: "Teletex service". [25] ITU-T Recommendation F.300: "Videotex service". [26] ITU-T Recommendation F.60: "Operational provisions for the international telex service". [27] ITU-T Recommendation F.721: "Videotelephony teleservice for ISDN". [28] ETSI ETS 300 356-1: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 2 for the international interface; Part 1: Basic services [ITU-T Recommendations Q.761 to Q.764 (1993), modified]". [29] ITU-T Recommendation X.213: "Information technology - Open Systems Interconnection - Network service definition". [30] ISO/IEC 8348: "Information technology - Open Systems Interconnection - Network service definition". [31] ITU-T Recommendation T.38: "Procedures for real-time Group 3 facsimile communication over IP networks". [32] ITU-T Recommendation Q.1912.5: "Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Control protocol or ISDN User Part". [33] ITU-T Recommendation Q.737.1: "Stage 3 description for additional information transfer supplementary services using Signalling System No. 7: User-to-user signalling (UUS)". [34] ITU-T Recommendation Q.734.1: "Stage 3 description for multiparty supplementary services using Signalling System No. 7: Conference calling". [35] ITU-T Recommendation Q.734.2: "Stage 3 description for multiparty supplementary services using Signalling System No. 7: Three-party service". ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 8 [36] ITU-T Recommendation Q.767: "Application of the ISDN User Part of CCITT signalling system No. 7 for international ISDN interconnections". [37] ITU-T Recommendation G.711 (1988): "Pulse code modulation (PCM) of voice frequencies".
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
2.2 Informative references
|
The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] ITU-T Recommendation T.101 (1994): "International interworking for Videotex services". [i.2] ITU-T Recommendation T.102 (1993): "Syntax-based Videotex end-to-end protocols for the circuit mode ISDN". [i.3] ITU-T Recommendation X.200 (1994): "Information technology - Open Systems Interconnection - Basic Reference Model: The basic model". [i.4] ITU-T Recommendation F.400/X.400 (1999): "Message handling system and service overview".
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
3 Definitions and abbreviations
| |
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
3.1 Definitions
|
For the purposes of the present document, the terms and definitions given in SIP/ISUP interworking reference specification, in ISDN layer 3 reference specification, in ISO/IEC 9646-1 [8], in ISO/IEC 9646-3 [9], in ISO/IEC 9646-7 [10] and the following apply: Abstract Test Case (ATC): complete and independent specification of the actions required to achieve a specific test purpose, defined at the level of abstraction of a particular Abstract Test Method, starting in a stable testing state and ending in a stable testing state Abstract Test Method (ATM): description of how an SUT is to be tested, given at an appropriate level of abstraction to make the description independent of any particular realization of a Means of Testing, but with enough detail to enable abstract test cases to be specified for this method Abstract Test Suite (ATS): test suite composed of abstract test cases Implementation Under Test (IUT): implementation of one or more OSI protocols in an adjacent user/provider relationship, being part of a real open system which is to be studied by testing Means of Testing (MOT): combination of equipment and procedures that can perform the derivation, selection, parameterization and execution of test cases, in conformance with a reference standardized ATS, and can produce a conformance log PICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes the PICS PIXIT proforma: document, in the form of a questionnaire, which when completed for the SUT becomes the PIXIT Point of Control and Observation (PCO): point within a testing environment where the occurrence of test events is to be controlled and observed, as defined in an Abstract Test Method pre-test condition: setting or state in the SUT which cannot be achieved by providing stimulus from the test environment Protocol Implementation Conformance Statement (PICS): statement made by the supplier of a protocol claimed to conform to a given specification, stating which capabilities have been implemented ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 9 Protocol Implementation eXtra Information for Testing (PIXIT): statement made by a supplier or implementor of an SUT (protocol) which contains or references all of the information related to the SUT and its testing environment, which will enable the test laboratory to run an appropriate test suite against the SUT SIP number: number conforming to the numbering and structure specified in ITU-T Recommendation E.164 [11] System Under Test (SUT): real open system in which the SUT resides user: access protocol entity at the User side of the user-network interface where a T reference point or coincident S and T reference point applies
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
3.2 Abbreviations
|
For the purposes of the present document, the following abbreviations apply: ACM Address Complete Message ANM Answer Message AS Application Specific ATC Abstract Test Case ATM Abstract Test Method ATP Access Transport Parameter ATS Abstract Test Suite BCI Backward Call Indicators CCBS Completion of Communication to Busy Subscriber CGB Circuit Group Blocking CON Connect Message CPG Call Progress Message CPS Calling Party's Category DSS1 Digital Subscriber System No. 1 FCI Forward Call Indicators GRS Group Reset message HLC High Layer Compatibility IAM Initial Address Message ISDN Integrated Services Digital Network ISUP ISDN User Part IUT Implementation Under Test MOT Means Of Testing NCI Nature of Connection Indicators OBCI Optional Backward Call Indicators OFCI Optional Forward Call Indicator O-MGCF Outgoing Media Gateway Control Function PICS Protocol Implementation Conformance Statement PIXIT Protocol Implementation eXtra Information for Testing REL Release Message RSC Reset Circuit message SUT System Under Test TMR Transmission Medium Requirement TP Test Purpose TSS Test Suite Structure TTCN Tree and Tabular Combined Notation NOTE: The ISUP message acronyms can be found in table 2 of ITU-T Recommendation Q.762 [3].
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
4 Implementation under test and test methods
| |
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
4.1 Identification of the system and implementation under test
|
FFS ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 10
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
5 Test Suite Structure (TSS)
|
The Test Suite Structure is in close alignment with ES 283 027 [1].
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
5.1 Interworking from SIP to ISUP (outgoing call)
|
SIP-ISUP Basic call Sending of the Initial address message (IAM) 101xxx Sending of the Subsequent address message (SAM) 102xxx Sending of COT 103xxx Receipt of the Address complete message (ACM) 104xxx Receipt of the Call progress message (CPG) 105xxx Receipt of the answer message (ANM) 106xxx Receipt of the Connect message (CON) 107xxx Receipt of the Release message (REL) 108xxx Autonomous release at I-MGCF 109xxx Receipt of the BYE, CANCEL message / sending of a REL message 110xxx Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented 111xxx Receipt of the SUSPEND Message (SUS) 112xxx Receipt of the RESUME Message (RES) 113xxx Figure 1: Basic call - Test suite structure for interworking between SIP to ISUP (outgoing call)
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
5.2 Interworking from ISUP to SIP (incoming call)
|
ISUP-SIP Basic call Sending of the INVITE message 301xxx Receipt of the Subsequent address message (SAM) 302xxx Sending of the Address complete message (ACM) 303xxx Sending of the Call progress message (CPG) 304xxx Sending of the answer message (ANM) 305xxx Sending of the Connect message (CON) 306xxx Receipt of the Release message (REL) 307xxx Sending of the Release Message (REL) 308xxx Autonomous release 309xxx Receipt of Reset circuit message (RSC) 310xxx Receipt of Circuit group reset message (GRS) 311xxx Receipt of Circuit group blocking message (CGB) with the indication hardware failure oriented 312xxx Figure 2: Basic call - Test suite structure for interworking between ISUP to SIP (incoming call) ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 11 5.3 Supplementary Services - Interworking from SIP to ISUP (outgoing call) SIP-ISUP Supplementary Services Calling Line Identification (CLI) 501xxx Call Hold (HOLD) 502xxx Terminal Portability (TP) 503xxx Conference Calling (CONF) 504xxx Three-Party (3PTY) 505xxx Connected Line Identification (COL) 506xxx Malicious call identification (MCID) 507xxx Subaddressing (SUB) 508xxx Call Diversion (CDIV) 509xxx Call Waiting (CW) 510xxx User to User Signalling (UUS) 511xxx Explicit Call transfer (ECT) 512xxx Completion of Call to Busy Subscriber (CCBS) 513xxx Completion of Calls on No reply (CCNR) 514xxx Anonymous Call Rejection (ACR) 515xxx Closed user group (CUG) 516xxx Figure 3: Supplementary Services - Test suite structure for interworking between SIP to ISUP (outgoing call) 5.4 Supplementary Services - Interworking from ISUP to SIP (incoming call) ISUP-SIP Calling Line Identification (CLI) 601xxx Call Hold (HOLD) 602xxx Terminal Portability (TP) 603xxx Conference Calling (CONF) 604xxx Three-Party (3PTY) 605xxx Connected Line Identification (COL) 606xxx Subaddressing (SUB) 607xxx Closed User Group (CUG) 608xxx Call Diversion (CDIV) 609xxx User to User Signalling (UUS) 610xxx Explicit Call transfer (ECT) 611xxx Anonymous Call Rejection (ACR) 612xxx Call waiting (CW) 613xxx Malicious call identification (MCID) 614xxx Figure 4: Supplementary Services - Test suite structure for interworking between ISUP to SIP (outgoing call)
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6 Test purposes (TP)
| |
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.1 Introduction
|
For each test requirement a Test Purpose (TP) is defined. ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 12
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.1.1 Test purpose (TP) naming convention
|
For each test requirement a Test Purpose (TP) is defined. All test purposes belong to the main group ISUP_SIP_Interworking. Groups are organized according to the test suite structure (TSS). Each test purpose is presented in a separate table. The first row of the table contains the following items: TP Identifier of the test purpose; SIP reference the reference to the requirement in the DSS1 layer 3 Recommendation, which led to the TP; ISUP reference the reference to the requirement in the interworking specification and the requirement in the SIP-UP Recommendation, which led to the TP.
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.1.2 Source of test purpose definition
|
The test purposes have been developed based on ES 283 027 [1] as an endorsement of TS 129 163 [2].
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.1.3 Test purpose structure
|
The test purpose structure is according to the test suite structure (TSS).
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2 Test purposes for the basic call
| |
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1 Interworking from SIP to ISUP (Outgoing Call)
| |
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1.1 Sending of the Initial Address Message (IAM)
|
TP101001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Normal call setup without precondition requirement Ensure that if the SIP precondition extension is not included in the Supported or Require header, the I-MGCF shall send an IAM immediately after the reception of the INVITE, The I-MGCF shall set the continuity indicators to "Continuity check not required". SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 13 TP101002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 4/4 AND PICS 4/5 ISUP selection criteria: Test purpose: Call setup with precondition tag in the Supported header and preconditions are fulfilled successful Ensure if a Continuity Check procedure is supported in the ISUP network and SIP precondition extension are included in the SIP Supported header and the preconditions are indicated as fulfilled in the SDP, the I-MGCF shall send the IAM immediately after the reception of the INVITE. The preconditions met is sent in the 200 OK INVITE. SIP Parameter values: INVITE: Supported: 100rel, precondition SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 200 OK INVITE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv ISUP Parameter values: IAM: Continuity indicator: Continuity check not required Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 14 TP101003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: NOT PICS 4/4 AND NOT PICS 4/5 ISUP selection criteria: Test purpose: Call setup with precondition tag in the Supported header and preconditions are fulfilled unsuccessful Ensure if the received SDP indicates that precondition is fulfilled the I-MGCF shall set the continuity indicators to "continuity check is not required". The SUT does not an answer to the precondition requirement. SIP Parameter values: INVITE: Supported: 100rel, precondition SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv ISUP Parameter values: IAM: Continuity indicator: Continuity check not required Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 15 TP101004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 4/4 AND PICS 4/5 ISUP selection criteria: PICS 4/1 Test purpose: Call setup with precondition tag in the Require header and requirement for resource reservation Ensure if the INVITE request contains the precondition tag in the Require header the received SDP indicates that precondition is not fulfilled the I-MGCF shall set the continuity indicators to "continuity check performed on a previous circuit" or "required on this circuit". SIP Parameter values: INVITE: Require: precondition SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv ISUP Parameter values: IAM: "continuity check required on this circuit" or "Continuity check performed on a previous circuit" Comments: SIP SUT ISUP INVITE IAM 183 Session Progress PRACK 200 OK PRACK UPDATE COT 200 OK UPDATE 180 Ringing ACM PRACK 200 OK PRACK Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 16 TP101005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 4/4 AND PICS 4/5 ISUP selection criteria: PICS 4/1 Test purpose: Call setup with precondition tag in the Supported header and requirement for resource reservation Ensure if the INVITE request contains the precondition tag in the Supported header the received SDP indicates that precondition is not fulfilled the I-MGCF shall set the continuity indicators to "continuity check performed on a previous circuit" or "required on this circuit". SIP Parameter values: INVITE: Supported: precondition SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv ISUP Parameter values: IAM: "continuity check required on this circuit" or "Continuity check performed on a previous circuit" Comments: SIP SUT ISUP INVITE IAM 183 Session Progress PRACK 200 OK PRACK UPDATE COT 200 OK UPDATE 180 Ringing ACM PRACK 200 OK PRACK Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 17 TP101006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: NOT PICS 4/4 AND PICS 4/5 ISUP selection criteria: PICS 4/1 Test purpose: Call setup with precondition tag in the Require header and requirement for resource reservation Ensure if the INVITE request contains the precondition tag in the Require header the received SDP indicates that precondition is not fulfilled the I-MGCF shall send a 5xx final provisional response if preconditions are not supported. SIP Parameter values: INVITE: Require: precondition SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv ISUP Parameter values: Comments: SIP SUT ISUP INVITE 580 Precondition Failure ACK ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 18 TP101007 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.1 RFC 3264 [18] TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 4/4 AND PICS 4/5 ISUP selection criteria: PICS 1/3 AND NOT PICS 4/1 Test purpose: COT procedure not supported, IAM delayed until preconditions met Ensure if Continuity Check procedure is not supported in the ISUP network, and the SDP in the received INVITE request contains preconditions not met, the I-MGCF shall delay sending the IAM until the SIP preconditions are met and set the continuity indicators in the resulting IAM to "Continuity check not required". SIP Parameter values: INVITE: Require: precondition SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv ISUP Parameter values: IAM Continuity Indicator: continuity check required on this circuit, COT Continuity Indicator: continuity check successful; Comments: SIP SUT ISUP INVITE 183 Session Progress PRACK 200 OK PRACK UPDATE IAM 200 OK UPDATE 180 Ringing ACM PRACK 200 OK PRACK Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 19 TP101008 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.1 RFC 3264 [18] TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 4/4 AND PICS 4/5 ISUP selection criteria: PICS 1/3 AND NOT PICS 1/4 AND PICS 4/1 Test purpose: Media type not supported, call setup rejected Ensure that the I-MGCF shall reject an INVITE request for a session only containing unsupported media types by sending a status code 488 "Not Acceptable Here. SIP Parameter values: SDP: media type not supported in the SUT (PIXIT) ISUP Parameter values: Comments: SIP SUT ISUP INVITE 488 Not Acceptable Here ACK TP101009 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.3.3.1.1 RFC 3264 [18] TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: SUT rejects unsupported media types Ensure that If several media streams are contained in a single INVITE request, the I-MGCF shall select one of the supported media streams, reserve the codec(s) for that media stream, and reject the other media streams and unselected codecs in the SDP answer, as detailed in RFC 3264 [18]. If supported audio media stream(s) and supported non-audio media stream(s) are contained in a single INVITE request, an audio stream should be selected. SIP Parameter values: Offer: m=audio 4711 RTP/AVP 8 m= video 4713 RTP/AVP 31 Answer: m=audio 4711 RTP/AVP 8 m=video 0 RTP/AVP 31 ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 20 TP101010 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.1 RFC 3264 [18] TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 4/15 ISUP selection criteria: Test purpose: To tag included in 183 provisional response Ensure that The I-MGCF shall include a To tag in the first backward non-100 provisional response, in order to establish an early dialog as described in RFC 3261 [6] SIP Parameter values: 183 To taq included ISUP Parameter values: ACM: oBCi "inband info available" Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM(no indication) 180 Ringing CPG(Alerting) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP101011 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.1 RFC 3264 [18] TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: To tag included in 180 provisional response Ensure that The I-MGCF shall include a To tag in the first backward non-100 provisional response, in order to establish an early dialog as described in RFC 3261 [6] SIP Parameter values: 180 To tag included ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 21 TP101012 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.1.2.2 and 7.2.3.1.2.3 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 2/1 ISUP selection criteria: PICS NOT 4/16 Test purpose: Setting of nature of connection indicator and forward call indicator Ensure that the SUT on receipt of an INVITE message: sends an IAM message, where the Calling party's category is set to "Ordinary calling subscriber", the Nature of Connection Indicators (NCI) encoded as follows: β’ Satellite indicator set to: One satellite circuit in the connection". β’ Echo control device indicator set to: "Outgoing echo control device included". β’ The Forward call indicator is encoded as follows: Interworking indicator: Interworking encountered. ISUP/BICC Indicator: ISDN User part/BICC not used all the way. ISUP/BICC Preference indicator: ISDN user part/BICC not required all the way. ISDN access indicator: Originating access non-ISDN. SIP Parameter values: ISUP Parameter values: Nature of Connection Indicators (NCI): Satellite indicator set to: "One satellite circuit in the connection" Echo control device indicator set to: "Outgoing echo control device included" Forward Call Indicators (FCI): Interworking indicator: interworking encountered ISDN user part indicator: ISDN user part/BICC not used all the way ISDN access indicator: originating access non-ISDN ISDN user part preference indicator: ISDN user part/BICC not required all the way Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 22 TP101013 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.2 Q.767 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 1/1 ISUP selection criteria: Test purpose: Setting of nature of connection indicator and forward call indicator T38 codec received Ensure that the SUT on receipt of an INVITE message with SDP m line T:38: sends an IAM message, where the Calling party's category is set to "Ordinary calling subscriber", the Nature of Connection Indicators (NCI) encoded as follows: β’ Satellite indicator set to: "One satellite circuit in the connection". - Echo control device indicator set to: "Outgoing echo control device not included". - the Forward call indicator is encoded as follows: Interworking indicator: Interworking encountered ISUP/BICC Indicator: ISDN User part/BICC not used all the way ISUP/BICC Preference indicator: ISDN user part/BICC not required all the way ISDN access indicator: Originating access non-ISDN SIP Parameter values: INVITE with SDP m line T:38 ISUP Parameter values: Nature of Connection Indicators (NCI): Satellite indicator set to: "One satellite circuit in the connection" Echo control device indicator set to: "Outgoing echo control device not included" Forward Call Indicators (FCI): Interworking indicator: interworking encountered ISDN user part indicator: ISDN user part/BICC not used all the way ISDN access indicator: originating access non-ISDN ISDN user part preference indicator: ISDN user part/BICC not required all the way Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 23 TP101014 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.3 Q.767 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 2/3 ISUP selection criteria: PICS 4/16 Test purpose: Setting of nature of connection indicator and forward call indicator indicating ISDN and TMR 64 kBit/s Ensure that the SUT on receipt of an INVITE message with SDP m line CLEARMODE: β’ sends an IAM message, where the Calling party's category is set to "Ordinary calling subscriber", if the TMR = 64 kBit/s unrestricted is used the Nature of Connection Indicators (NCI) encoded as follows: - the Nature of Connection Indicators (NCI) encoded as follows: - Satellite indicator set to: "One satellite circuit in the connection" - Echo control device indicator set to: outgoing echo control device not included. - the Forward call indicator is encoded as follows: Interworking indicator: No interworking encountered ISUP/BICC Indicator: ISDN User part/BICC used all the way ISUP/BICC Preference indicator: ISDN user part/BICC not required all the way ISDN access indicator: Originating access ISDN. SIP Parameter values: ISUP Parameter values: Nature of Connection Indicators (NCI): Satellite indicator set to: "One satellite circuit in the connection" Echo control device indicator set to: outgoing echo control device not included Forward Call Indicators (FCI): Interworking indicator: No interworking encountered ISDN user part indicator: ISDN user part/BICC used all the way ISDN access indicator: originating access ISDN ISDN user part preference indicator: ISDN user part/BICC not required all the way Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 24 TP101015 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.5 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: Based on table 1 ISUP selection criteria: Test purpose: Mapping of SDP into the TMR Ensure that the SUT in the Idle state on receipt of an INVITE message containing the media description defined in table 1 with the "a =" "b =" and "m=" lines set to a_b_m_LINE_VALUE: sends an IAM message, with the Transmission Medium Requirement (TMR) parameter set to TMR_VALUE. SIP Parameter values: INVITE; a_b_m_LINE_VALUE ISUP Parameter values: IAM; TMR: ISUP_TMR Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 25 Table 1 Values for test purposes TP101015 a_b_m_LINE_VALUE m= line b= line a= line TMR_VALUE test purposes <media> <transport> <fmt-list> <modifier>:<bandwidt h-value> rtpmap:<dynamic-PT> <encoding name>/<clock rate>[/encoding parameters> TMR codes VA_01 audio RTP/AVP Dynamic PT N/A or up to 64 kbit/s rtpmap:<dynamic-PT> PCMU/8000 "3,1 KHz audio" VA_02 audio RTP/AVP 8 N/A or up to 64 kbit/s N/A "3,1KHz audio" VA_03 audio RTP/AVP Dynamic PT N/A or up to 64 kbit/s rtpmap:<dynamic-PT> PCMA/8000 "3,1 KHz audio" VA_04 audio RTP/AVP Dynamic PT AS: 64 kbit/s rtpmap:<dynamic-PT> CLEARMODE/8000 (NOTE 2) "64 kbit/s unrestricted" VA_05 image udptl t38 [31] N/A or up to 64 kbit/s Based on ITU-T Recommendation T.3 8 [31] "3,1 kHz audio" VA_06 image tcptl t38 [31] N/A or up to 64 kbit/s Based on ITU-T Recommendation T.3 8 [31] "3,1 kHz audio" VA_07 audio RTP/AVP 0 N/A or up to 64 kbit/s N/A "3,1 KHz audio" NOTE 1: In this table the codec G.711 is used only as an example. Other codecs are possible. NOTE 2: CLEARMODE is specified in RFC 4040 [19]. NOTE 3: If the b=line indicates a bandwidth greater than 64 kbit/s then the call may use compression techniques or reject the call with a 415 response indicating that only one media stream of 64 kbit/s is supported. NOTE 4: <bandwidth value> for <modifier> of AS is in units of kbit/s. ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 26 TP101016 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.5 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 2/3 ISUP selection criteria: PICS 4/18 AND PICS 4/19 Test purpose: Fallback connection type supported: Mapping of the second PSTN XML BearerCapability elements into TMR and USI prime Ensure that when the INVITE request includes multiple PSTN XML bearer information element: If the first stated codec in the INVITE is a codec appearing in table 1 and is the equivalent as stated within the second Bearer Capability in the XML Bearer Capability element then the I-MGCF shall map the XML Bearer Capability element into the TMR and USI prime and shall set the TMR to "64 kBit/s preferred". SIP Parameter values: first BC: 3,1 kHz audio or speech second BC: unrestricted digital information with tones/announcements ISUP Parameter values: USI Prime: unrestricted digital information with tones/announcements TMR: 64 kBit/s preferred Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP101017 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.5a TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: Fallback connection type supported: Mapping of the first PSTN XML BearerCapability elements into USI and TMR prime Ensure when the INVITE request includes multiple PSTN XML BearerCapability then the I- MGCF shall: If the second stated codec in the INVITE is a codec appearing in table 1 and is the equivalent as stated within the first Bearer Capability in the XML Bearer Capability element then the I-MGCF shall map the XML Bearer Capability element into the TMR prime and USI and shall map the TMR prime from the PSTN XML BearerCapability (InformationTransferCabability). SIP Parameter values: first BC: 3,1 kHz audio or speech second BC: unrestricted digital information with tones/announcements ISUP Parameter values: USI: 3,1 kHz audio or speech TMR prime: 3,1 kHz audio or speech Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 27 TP101018 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.5a TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: Fallback supported. Discard the second PSTN XML BearerCapability element if it is not equivalent to the first codec in the SDP Ensure when the INVITE request includes multiple PSTN XML BearerCapability then the I- MGCF shall: if the compared first codec stated within the INVITE is not equivalent as stated within the second XML Bearer Capability element, then the second XML Bearer Capability element shall be discarded. SIP Parameter values: PSTN XML BC 1 (speech or 3,1 kHz audio) PSTN XML BC 2 (unrestricted digital information with tones and announcements) SDP: m =audio xxx, RTP/AVP 0 8 ISUP Parameter values: USI: not included TMR. 3,1 kHz audio Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP101019 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.5 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of PSTN XML BearerCapability element into the USI parameter Ensure that the SUT in the Idle state on receipt of an INVITE message containing the XML BearerCapability element the mapping of the USI ISUP_USI shall be taken from the PSTN XML BearerCapability value ISDN_BC. SIP Parameter values: PSTN XML BearerCapability ISDN_BC ISUP Parameter values: IAM: USI = ISUP_USI Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC Values and selection criteria for the test purpose TP101019 VA_01 ISDN_BC = speech ISUP_USI = speech VA_02 ISDN_BC = 3,1 kHz audio ISUP_USI = 3,1 kHz audio VA_03 ISDN_BC = Unrestricted digital information ISUP_USI = Unrestricted digital information ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 28 TP101020 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.5 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of PSTN XML BearerCapability element into the TMR parameter Ensure that the SUT in the Idle state on receipt of an INVITE message containing one PSTN XML BearerCapability value ISDN_BC_ITC sends an IAM message, with the Transmission Medium Requirement (TMR) parameter set to ISUP_TMR. SIP Parameter values: INVITE; PSTN XML BearerCapability ISUP Parameter values: IAM: TMR Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC Values and selection criteria for the test purpose TP101020 VA_01 ISDN_BC_ITC = speech ISDN_BC_ITR = 64 kbits/s ISUP_TMR = speech VA_02 ISDN_BC_ITC = 3,1 kHz audio ISDN_BC_ITR = 64 kbits/s ISUP_TMR = 3,1 kHz audio VA_03 ISDN_BC_ITC = unrestricted digital information ISDN_BC_ITR = 64 kbits/s ISUP_TMR = 64 kbits/s unrestricted TP101021 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.5 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: No PSTN XML received, mapping of HLC in ATP Ensure that the SUT in the Idle state on receipt of an INVITE message, with the media description defined in table 2 with the "a =" "b =" and "m=" lines to lines set to a_b_m_LINE_VALUE: β’ sends an IAM message with the Access transport parameter containing the HLC information element. SIP Parameter values: INVITE: a_b_m_LINE_VALUE ISUP Parameter values: IAM; Access transport parameter HLC: HLC_VALUE Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 29 Table 2 Values for test purposes TP101021 M= line b= line a= line HLC parameter HLC_VALUE Test purposes <media> <transport> <fmt-list> <modifier>:<bandwidth- value> rtpmap:<dynamic-PT> <encoding name>/<clock rate>[/encoding parameters> HLC_VALUE see note 1 VA_01 Audio RTP/AVP 0 N/A or up to 64 kbit/s N/A See note 2 VA_02 Audio RTP/AVP Dynamic PT N/A or up to 64 kbit/s rtpmap:<dynamic-PT> PCMU/8000 See note 2 VA_03 Audio RTP/AVP 8 N/A or up to 64 kbit/s N/A See note 2 VA_04 Audio RTP/AVP Dynamic PT N/A or up to 64 kbit/s rtpmap:<dynamic-PT> PCMA/8000 See note 2 VA_05 Image Udptl t38 N/A or up to 64 kbit/s Based on ITU-T Recommendation T.38 [31] "FacsΓmile Group 2/3" VA_06 Image Tcptl t38 N/A or up to 64 kbit/s Based on ITU-T Recommendation T.38 [31] "FacsΓmile Group 2/3" NOTE 1: <bandwidth value> for <modifier> of AS is evaluated to be B kbit/s. NOTE 2: HLC normally absent in this case. It is possible for HLC to be present with the value "Telephony", although clause 6.3.1/ITU-T Recommendation Q.939 [13] indicates that this would normally be accompanied by a value of "Speech" for the Information Transfer Capability element. ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 30 TP101022 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.10 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of PSTN XML BearerCapability and HighLayerCompatibility in ATP HLC Ensure that the SUT in the Idle state on receipt of a INVITE message with a PSTN XML BearerCapability BC_VALUE and the PSTN XML HighLayerCompatibility HLC_VALUE sends an IAM message with the Access transport parameter containing the received PSTN XML HighLayerCompatibility]. SIP Parameter values: INVITE PSTN XML BearerCapability: BC_VALUE PSTN XML HighLayerCompatibility: HLC_VALUE ISUP Parameter values: IAM; Access transport parameter HLC: HLC_VALUE Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC Values and selection criteria for the test purpose TP101022 VA_01 HLC_VALUE = Telephony BC_VALUE = speech VA_02 HLC_VALUE = Facsimile Group 2/3 (ITU-T Recommendation F.182 [20]) BC_VALUE = 3,1 kHz audio VA_03 HLC_VALUE == Facsimile Group 4 Class I (ITU-T Recommendation F.184 [21]) BC_VALUE = Unrestricted digital information VA_04 HLC_VALUE == Teletex service, basic and mixed mode of operation (ITU-T Recommendation F.230 [22]) and facsimile service Group 4, Classes II and III (ITU-T Recommendation F.184 [21]) BC_VALUE = Unrestricted digital information VA_05 HLC_VALUE == Teletex service, basic and processable mode of operation (ITU-T Recommendation F.220 [23]) BC_VALUE = Unrestricted digital information VA_06 HLC_VALUE = Teletex service, basic mode of operation (ITU-T Recommendation F.200 [24]) BC_VALUE = Unrestricted digital information VA_07 HLC_VALUE = Syntax based Videotex (ITU-T Recommendations F.300 [25] and T.102 [i.2]) BC_VALUE = Unrestricted digital information VA_08 HLC_VALUE = International Videotex interworking via gateways or interworking units (ITU- T Recommendations F.300 [25] and T.101 [i.1]) BC_VALUE = Unrestricted digital information VA_09 HLC_VALUE = Telex service (ITU-T Recommendation F.60 [26]) BC_VALUE = Unrestricted digital information VA_10 HLC_VALUE = Message Handling Systems (MHS) (X.400 - Series Recommendations [i.4]) BC_VALUE = Unrestricted digital information VA_11 HLC_VALUE = OSI application (X.200 - Series ITU-T Recommendations [i.3]) BC_VALUE = Unrestricted digital information VA_12 HLC_VALUE = Audio visual (ITU-T Recommendation F.721 [27]) BC_VALUE = Unrestricted digital information ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 31 TP101023 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.10 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of PSTN XML BearerCapability and HighLayerCompatibility in User Teleservice parameter Ensure that the SUT in the Idle state on receipt of a INVITE message with PSTN XML BearerCapability BC_VALUE and the PSTN XML HighLayerCompatibility HLC_VALUE sends an IAM message with the User Teleservice parameter containing the received PSTN XML HighLayerCompatibility. SIP Parameter values: INVITE PSTN XML BearerCapability: BC_VALUE PSTN XML HighLayerCompatibility: HLC_VALUE ISUP Parameter values: IAM; User teleservice parameter Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC Values and selection criteria for the test purpose TP101023 VA_01 HLC_VALUE = Telephony BC_VALUE = speech VA_02 HLC_VALUE = Facsimile Group 2/3 (ITU-T Recommendation F.182 [20]) BC_VALUE = 3,1 kHz audio VA_03 HLC_VALUE == Facsimile Group 4 Class I (ITU-T Recommendation F.184 [21]) BC_VALUE = Unrestricted digital information VA_04 HLC_VALUE == Teletex service, basic and mixed mode of operation (ITU-T Recommendation F.230 [22]) and facsimile service Group 4, Classes II and III (ITU-T Recommendation F.184 [21]) BC_VALUE = Unrestricted digital information VA_05 HLC_VALUE == Teletex service, basic and processable mode of operation (ITU-T Recommendation F.220 [23]) BC_VALUE = Unrestricted digital information VA_06 HLC_VALUE = Teletex service, basic mode of operation (ITU-T Recommendation F.200 [24]) BC_VALUE = Unrestricted digital information VA_07 HLC_VALUE = Syntax based Videotex (ITU-T Recommendations F.300 [25] and T.102 [i.2]) BC_VALUE = Unrestricted digital information VA_08 HLC_VALUE = International Videotex interworking via gateways or interworking units (ITU-T Recommendations F.300 [25] and T.101 [i.1]) BC_VALUE = Unrestricted digital information VA_09 HLC_VALUE = Telex service (ITU-T Recommendation F.60 [26]) BC_VALUE = Unrestricted digital information VA_10 HLC_VALUE = Message Handling Systems (MHS) (X.400 - Series Recommendations [i.4]) BC_VALUE = Unrestricted digital information VA_11 HLC_VALUE = OSI application (X.200 - Series Recommendations [i.3]) BC_VALUE = Unrestricted digital information VA_12 HLC_VALUE = Audio visual (ITU-T Recommendation F.721 [27]) BC_VALUE = Unrestricted digital information ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 32 TP101024 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.10 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of PSTN XML LowLayerCompatibility in ATP LLC Ensure that the SUT in the Idle state on receipt of a INVITE message with a PSTN XML LowLayerCompatibility sends an IAM message with the Access transport parameter containing the PSTN XML LowLayerCompatibility as received in the INVITE message. SIP Parameter values: INVITE ; PSTN XML LowLayer Compatibility: LLC_VALUE (PIXIT) ISUP Parameter values: IAM; Access transport parameter LLC: LLC_VALUE (PIXIT) Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP101025 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.10 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of PSTN XML ProgressIndicator in ATP PI Ensure that the SUT in the Idle state on receipt of a INVITE message with a valid PSTN XML ProgressIndicator sends an IAM message with the Access transport parameter containing the PSTN XML ProgressIndicator as received in the INVITE message. SIP Parameter values: INVITE; PSTN XML ProgressIndicator: PI_VALUE ISUP Parameter values: IAM; progress indicator PI_VALUE Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC Values and selection criteria for the test purpose TP101025 VA_01 PI_VALUE = Call is not end-to-end ISDN; further call progress information is available in-band (# 1) VA_02 PI_VALUE = Originating access is non ISDN (#3) ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 33 TP101026 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.9 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: PICS 4/3 Test purpose: HOP counter derived from the Max-Forward header Ensure that the SUT the I-MGCF shall derive the Hop Counter parameter value from the Max-Forwards header field value by applying a factor. The Hop Counter for a given message should never increase and should decrease by at least 1 with each successive visit to an MGCF, regardless of interworking, and similarly for Max-Forwards in the SIP domain. SIP Parameter values: Max-Forward header ISUP Parameter values: IAM: Hop Counter parameter value Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC The initial and successively mapped values of Hop Counter should be large enough to accommodate the maximum number of hops that might be expected of a validly routed call. TP101027 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: NOT PICS 1/5 Test purpose: Mapping of Request URI into called party number "national number" Analyse the information contained in received Request URI E.164 address. If CC is country code of the network in which the next hop terminates, then set Nature of Address indicator to "National (significant) number". The country code is removed from the numberstring. SIP Parameter values: INVITE: Request URI ISUP Parameter values: IAM: Called party number Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 34 TP101028 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: PICS 1/5 Test purpose: Mapping of Request URI into called party number "international number" Analyse the information contained in received Request URI E.164 address. If CC is not the country code of the network in which the next hop terminates, then set Nature of Address indicator to "International number". SIP Parameter values: INVITE: Request URI ISUP Parameter values: IAM: Called party number Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP101029 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of Request URI into called party number. Setting of Numbering plan and internal network number indicator Ensure that the SUT on receipt of an INVITE message with a Called party number contained in the userinfo component of the Request-URI: β’ Internal Network Number Indicator: routing to internal network number not allowed. β’ Numbering plan Indicator: 001 ISDN (Telephony) numbering plan. SIP Parameter values: INVITE: Request URI ISUP Parameter values: IAM: Called party number Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 35 TP101030 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of number digits in the Request URI into address signals in the Called party number CC is the same as the MGCF is located Analyse the information contained in received E.164 address. If CC is country code of the network in which the next hop terminates, then remove "+CC" and use the remaining digits to fill the Address signals. SIP Parameter values: INVITE: Request URI ISUP Parameter values: IAM: Called party number address signals Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP101031 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of number digits in the Request URI into address signals in the Called party number CC is not the same as the MGCF is located Analyse the information contained in received E.164 address. If CC is not the country code of the network in which the next hop terminates, then remove "+" and use the remaining digits to fill the Address signals. SIP Parameter values: INVITE: Request URI ISUP Parameter values: IAM: Called party number address signals Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 36 TP101032 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of calling party category Ensure that a cpc SIP_CPC parameter SIP_CPC received in the P-Asserted-Identity URI parameter and the "language" in the Accept-Language SIP_LANG header is mapped into the calling partycategory parameter ISUP_CPC in the sent IAM SIP Parameter values: INVITE: P-Asserted-Identity = PARAM, Accept-Language = ISUP_CPC ISUP Parameter values: IAM: Calling Party Category Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC Values for test purposes TP101032 SIP_CPC ISUP_CPC cpc received in a P-Asserted-Identity PARAM Accept-Language SIP_LANG Sent Calling party's category operator fr operator, language French operator en operator, language English operator de operator, language German operator ru operator, language Russian operator es operator, language Spanish ordinary ordinary calling subscriber test Test call payphone Payphone cellular mobile terminal located in the home PLMN cellular-roaming mobile terminal located in a visited PLMN ieps IEPS call marking for preferential call set up TP101033 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.1 TSS reference: SIP-ISUP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of PSTN XML ProgressIndicator #6 into FCi ISDN Ensure that when a PSTN XML ProgressIndicator value #6 is received in a INVITE MIME body, that the forward call indicator in the sent IAM idicatedes that the originating access is ISDN SIP Parameter values: INVITE: PSTN XML PI#6 ISUP Parameter values: IAM: Forward call indicator: Interworking indicator: no interworking encountered ISDN User Part indicator: ISDN user part used all the way ISDN access indicator: originating access ISDN ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 37 TP101033 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.1 Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1.2 Overlap procedure at the I-MGCF
|
TP102001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.2.1 TSS reference: SIP-ISUP/Basic call/Sending of the Subsequent address message (SAM)/ SIP selection criteria: ISUP selection criteria: Test purpose: Overlap sending successful at the I-MGCF Ensure that the SUT receives an INVITE with the same Call-ID and From tag as a previous INVITE which was associated with a BICC/ISUP call/bearer control instance currently existing on the BICC/ISUP side whereby the number of digits in the Request-URI is greater than the number of digits already accumulated for the call. β’ sends a SAM and pass it to outgoing BICC/ISUP procedures.The SAM shall contain in its Subsequent Number parameter only the additional digits received in this Request-URI compared with the digits already accumulated for the call. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE(CS1) IAM INVITE(CS2) SAM 484 Address Incomlete(CS1) ACK INVITE(CS3) SAM 484 Address Incomlete(CS2) ACK 180 Ringing(CS3) ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 38
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1.3 Sending of COT
|
TP103001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.3 TSS reference: SIP-ISUP/Basic call/ COT SIP selection criteria: PICS 4/4 AND PICS 4/5 ISUP selection criteria: PICS 1/5 AND PICS 4/1 Test purpose: COT is sent after precondition met If the IAM has already been sent, the Continuity message shall be sent indicating "continuity check successful", when all of the following conditions have been met: - The requested preconditions (if any) in the IMS network have been met. - A possible outstanding continuity check procedure is successfully performed on the outgoing circuit. SIP Parameter values: INVITE: Require: precondition SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv ISUP Parameter values: IAM: "Continuity check performed on a previous circuit" or "Continuity check required on this circuit" COT continuity indicator: Continuity check successful; Comments: SIP SUT ISUP INVITE IAM 183 Session Progress PRACK 200 OK PRACK UPDATE COT 200 OK UPDATE 180 Ringing ACM PRACK 200 OK PRACK Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 39
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1.4 Receipt of the Address Complete Message (ACM)
|
TP104001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: NOT PICS 4/15 ISUP selection criteria: Test purpose: Early ACM not interworked Ensure that the SUT on receipt of an ACM message where the Called party status indicator is set to "no indication": β’ the ACM is not interworked. SIP Parameter values: ISUP Parameter values: ACM Called party status: no indication; Comments: SIP SUT ISUP INVITE IAM ACM (no indication) 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP104002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: NOT PICS 4/15 ISUP selection criteria: Test purpose: Early ACM not interworked. Announcement provided by the terminating network Ensure that the SUT on receipt of an ACM message where the Called party status indicator is set to "no indication" and during the establishment of the communication the PSTN/ISDN provides an announcement: β’ the ACM is not interworked. SIP Parameter values: ISUP Parameter values: ACM Called party status: no indication; Comments: SIP SUT ISUP INVITE IAM ACM (no indication) Tones or announcement 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 40 TP104003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4A TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 4/15 AND PICS 2/1 ISUP selection criteria: Test purpose: Early ACM terminating access ISDN and OBCI "inband info available" received. Sending of 183 containing a P-Early-Media header Ensure that SUT on receipt of an ACM message where the CPS indicator is set to "no indication" the ISUP indicator is set to "ISUP is used all the way", the ISDN access indicator is set to "ISDN" and the OBCI with the in-band information is set to "Yes" and if the I-MGCF has received the P-Early-Media header in the INVITE request, and has not already sent a provisional response including a P-Early-Media header with parameters indicating authorization of early media, then the I-MGCF shall: β’ send the 183 Session Progress response with a P-Early-Media header authorizing early media. SIP Parameter values: INVITE: P-Early-Media header , SDP audio xxxx RTP/AVP 8 183 Session Progress: P-Early-Media header ISUP Parameter values: ACM; CPS indicator: no indication, ISUP indicator: ISUP is used all the way ISDN access indicator: ISDN OBCI in-band information: Yes Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM (no indication) 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 41 TP104004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4A TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 4/15 AND PICS 2/1 ISUP selection criteria: Test purpose: Early ACM BCI "ISDN User Part not used all the way" received. Sending of 183 containing a P-Early-Media header Ensure that SUT on receipt of an ACM message where the CPS indicator is set to "no indication", the ISUP indicator is set to "ISUP is used not all the way", and if the I-MGCF has received the P-Early-Media header in the INVITE request, and has not already sent a provisional response including a P-Early-Media header with parameters indicating authorization of early media, then the I-MGCF shall: β’ send the 183 Session Progress response with P-Early Media and a P-Early-Media header authorizing early media. SIP Parameter values: INVITE: P-Early-Media header , SDP audio xxxx RTP/AVP 8 183 Session Progress: P-Early-Media header ISUP Parameter values: ACM; CPS indicator: no indication, ISUP indicator: ISUP is not used all the way" OBCI with the in-band information: Yes Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM (no indication) 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP104005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4A TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 2/1 AND PICS 4/18 ISUP selection criteria: Test purpose: Early ACM BCI "Terminating access non-ISDN" received. Sending of 183 containing a PSTN XML ProgressIndicator #2 Ensure that the SUT, on receipt of an ACM message where the CPS indicator is set to "no indication", the ISUP indicator is set to "ISUP is used all the way", the ISDN access indicator is set to "non-ISDN", then the I-MGCF shall: β’ send the 183 Session Progress response with PSTN XML ProgressIndicator body containing the progress descriptions "destination address is non-ISDN (#2)". SIP Parameter values: INVITE: P-Early-Media header , SDP audio xxxx RTP/AVP 8 183 Session Progress: PSTM XML ProgressIndicator ISUP Parameter values: ACM: CPS indicator: no indication, ISUP indicator: ISUP is used all the way ISDN access indicator: non-ISDN OBCI with the in-band information: No Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM (no indication) 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 42 TP104006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4A TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 2/1 AND PICS 4/18 ISUP selection criteria: Test purpose: Early ACM BCi "ISDN User Part not used all the way" received. Sending of 183 containing a PSTN XML ProgressIndicator #1 Ensure that the SUT on receipt of an ACM message where the CPS indicator is set to "no indication", the ISUP indicator is set to "ISUP not used all the way", then the I-MGCF shall: β’ send the 183 Session Progress response PSTN XML body containing the progress descriptions "call is not end-to-end ISDN, further call progress information is available in-band (#1). SIP Parameter values: INVITE: P-Early-Media header , SDP audio xxxx RTP/AVP 8 183 Session Progress: P-Early Media and PSTN XML ProgressIndicator body containing the progress descriptions "call is not end-to-end ISDN, further call progress information is available in-band (#1) ISUP Parameter values: ACM; CPS indicator: no indication, ISUP indicator: ISUP not used all the way Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM (no indication) 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP104007 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4A TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 2/1 AND PICS 4/18 ISUP selection criteria: Test purpose: Early ACM OBCI "Inband-info available" received. Sending of 183 containing a PSTN XML ProgressIndicator #8 Ensure that the SUT on receipt of an ACM message where the CPS indicator is set to "no indication", the OBCI is set to "Inband-info available" then the I-MGCF shall: β’ send the 183 Session Progress response PSTN XML body containing the progress descriptions " in-band information or an appropriate pattern is now available" (#8). SIP Parameter values: INVITE: P-Early-Media header , SDP audio xxxx RTP/AVP 8 183 Session Progress: P-Early Media and PSTN XML ProgressIndicator body containing the progress descriptions "in-band information or an appropriate pattern is now available" (#8) ISUP Parameter values: ACM; CPS indicator: no indication, OBCI: in-band information or an appropriate pattern is now available Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM (no indication) 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 43 TP104008 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4A TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 2/1 AND PICS 4/18 ISUP selection criteria: Test purpose: Early ACM terminating access ISDN and ATP with PI received. Sending of 183 containing a PSTN XML ProgressIndicator Ensure that the SUT on receipt of an ACM message where the CPS indicator is set to "no indication", the ISUP indicator is set to "ISUP used all the way", the ISDN access indicator set to "ISDN", the Access Transport Parameter (ATP) containing the progress indicator set to PI_VALUE: β’ sends a 183 Session Progress message with PSTN XML ProgressIndicator set to PI_VALUE". SIP Parameter values: 183 Session Progress message PSTN XML ProgressIndicator set to PI_VALUE, ISUP Parameter values: ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: ISDN ATP progress indicator: PI_VALUE access delivery information: Set-up message generated (IF PRESENT) Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM (no indication, ATP) 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 44 TP104009 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4A TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 2/1 AND PICS 4/18 ISUP selection criteria: Test purpose: Early ACM received, mapping of BCI into PSTN XML ProgressIndicator #7 in the sent 183 Ensure that the SUT on receipt of an ACM message where the CPS indicator is set to "no indication", the interworking indicator I set to no interworking encountered, the ISUP indicator is set to "ISUP is used all the way", the ISDN access indicator is set to "ISDN" and the: β’ send the 183 Session Progress response with PSTN XML ProgressIndicator the progress descriptions "Terminating access ISDN"( #7). SIP Parameter values: 183 Session Progress message PSTN XML ProgressIndicator set to value #7 ISUP Parameter values: ACM: CPS indicator: no indication interworking indicator: no interworking encountered ISUP indicator: ISUP used all the way ISDN access indicator: terminating access ISDN Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM (no indication) 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP104010 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: ISUP selection criteria: Test purpose: ACM subscriber free received, a 180 is sent Ensure that the SUT on receipt of an ACM message where the Called party status indicator is set to "subscriber free" where the ISUP indicator parameter set to ISUP_ID, the ISDN access indicator set to ISDN_ACCES_ID and the OBCI in-band information set to OBCI_INBAND then: β’ the 180 Ringing SIP response is sent. Ensure that the in-band information can be transmitted to the calling user. SIP Parameter values: ISUP Parameter values: ACM FCI: ISUP_ID, ISDN_ACCESS_ID OBCI: OBCI_INBAND; Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 45 Table 3 test purposes ISUP Parameter values: VA_01 ACM ISUP_ID: ISUP not used all the way OBCI_INBAND: no VA_02 ACM ISUP_ID: ISUP not used all the way OBCI_INBAND: yes VA_03 ACM ISUP_ID: ISUP used all the way ISDN_ACCES_ID: non ISDN OBCI_INBAND: no VA_04 ACM ISUP_ID: ISUP used all the way ISDN_ACCES_ID: non ISDN OBCI_INBAND: yes VA_05 ACM ISUP_ID: ISUP used all the way ISDN access indicator: ISDN OBCI_INBAND: yes TP104011 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 2/1 AND PICS 4/18 ISUP selection criteria: Test purpose: ACM subscriber free received, mapping of BCI into PSTN XML ProgressIndicator #7 in the sent 180 Ensure that the SUT on receipt of an ACM message where the CPS indicator is set to "subscriber free", the ISUP indicator is set to "ISUP is used all the way", the ISDN access indicator is set to "ISDN": β’ sends an 180 Ringing response with P-Early Media and PSTN XML ProgressIndicator "Terminating access ISDN"(#7). SIP Parameter values: 180 Ringing response with P-Early Media and PSTN XML ProgressIndicator "Terminating access ISDN"(#7). ISUP Parameter values: ACM; CPS indicator: subscriber free ISUP indicator: ISUP is used all the way, ISDN access indicator: ISDN Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 46 TP104012 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 2/1 AND PICS 4/18 ISUP selection criteria: Test purpose: ACM subscriber free and OBCI inband info available received, mapping into PSTN XML ProgressIndicator(s) in the sent 180 Ensure that the SUT, having received the ACM message, where the CPS indicator is set to "subscriber free" where the ISUP indicator parameter set to ISUP_ID, the ISDN access indicator set to ISDN_ACCES_ID and the OBCI in-band information set to OBCI_INBAND: β’ sends an 180 Ringing response with PSTN XML body containing the progress descriptions set to PI_ID. SIP Parameter values: 180 Ringing P-Early Media and PSTN XML ProgressIndicator set to PI_ID. ISUP Parameter values: ACM; CPS indicator: subscriber free ISUP indicator: ISUP_ID ISDN access indicator: ISDN_ACCES_ID Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC Values for test purposes TP104012 test purposes ISUP Parameter values: PSTN XML progress descriptions: VA_01 ACM ISUP_ID: ISUP not used all the way OBCI_INBAND: no PI_ID: Call is not end-to-end ISDN (#1) VA_02 ACM ISUP_ID: ISUP not used all the way OBCI_INBAND: yes PI_ID: Call is not end-to-end ISDN (#1) and In-band information or appropriate pattern now available (#8) VA_03 ACM ISUP_ID: ISUP used all the way ISDN_ACCES_ID: non ISDN OBCI_INBAND: no PI_ID: Destination address is non-ISDN (#2) VA_04 ACM ISUP_ID: ISUP used all the way ISDN_ACCES_ID: non ISDN OBCI_INBAND: yes PI_ID: Destination address is non-ISDN (#2) and In-band information or appropriate pattern now available (#8) VA_05 ACM ISUP_ID: ISUP used all the way ISDN access indicator: ISDN OBCI_INBAND: yes PI_ID: In-band information or appropriate pattern now available (#8) and Terminating access ISDN"(#7) ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 47 TP104013 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4.1 ETS 300 356-1 [28], clauses 2.1.4, 2.2 TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: ACM received containing a TMU parameter and ATP received, mapping into PSTN XML ProgressIndicators in the 180 Ensure that the SUT on receipt of an ACM message where the CPS indicator is set to "subscriber free", the ISUP indicator is set to "ISUP is used all the way", the ISDN access indicator is set to "ISDN" and the Transmission Medium Used (TMU) is included with the value TMU_VALUE and the Access Transport Parameter (ATP) set to ATP_VALUE: β’ sends an 180 Ringing message with a PSTN XML BearerCapability encoded BC_VALUE and with PSTN XML ProgressIndicator body containing the progress descriptions "Terminating access ISDN"(#7). SIP Parameter values: INVITE; PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 180 Ringing PSTN XML BC: BC_VALUE ISUP Parameter values: ACM; CPS indicator: subscriber free, ISUP indicator: ISUP is used all the way ISDN access indicator: ISDN TMU: TMU_VALUE ATP: BC ATP_VALUE Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 48 Values and selection criteria for test purpose TP104013 Test purposes ACM Parameter values 180 Ringing Parameter values: INVITE parameter value VA_01 TMU_VALUE: speech ATP_VALUE: no BC PSTN XML BC_VALUE: speech PSTN XML INVITE BC1: speech INVITE BC2: unrestricted digital information with tones and announcements VA_02 TMU_VALUE: 3,1 kHz ATP_VALUE: no BC PSTN XML: BC_VALUE: 3,1 kHz audio PSTN XML INVITE BC1: 3,1 kHz audio INVITE BC2: unrestricted digital information with tones and announcements VA_03 TMU_VALUE: speech ATP_VALUE: BC = 3,1 kHz audio PSTN XML BC_VALUE: 3,1 kHz audio PSTN XML INVITE BC1: 3,1 kHz audio INVITE BC2: unrestricted digital information with tones and announcements VA_04 TMU_VALUE: speech ATP_VALUE: BC = speech PSTN XML BC_VALUE: speech PSTN XML INVITE BC1: speech INVITE BC2: unrestricted digital information with tones and announcements VA_05 TMU_VALUE: 3,1 kHz ATP_VALUE: BC = speech PSTN XML BC_VALUE: speech PSTN XML INVITE BC1: speech INVITE BC2: unrestricted digital information with tones and announcements VA_06 TMU_VALUE: 3,1 kHz audio ATP_VALUE: BC = 3,1 kHz audio PSTN XML BC_VALUE: 3,1 kHz audio PSTN XML INVITE BC1: 3,1 kHz audio INVITE BC2: unrestricted digital information with tones and announcements ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 49 TP104014 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4.1 ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: Fallback occurs in the early ACM mapping of TMU parameter and BC in ATP into 183 PSTN XML ProgressIndicators Ensure that the SUT on receipt of an ACM message where the CPS indicator is set to "no indication", the ISUP indicator is set to "ISUP is used all the way", the ISDN access indicator is set to "ISDN" and the Transmission Medium Used (TMU) is included with the value TMU_VALUE and the BC in the Access Transport Parameter (ATP) set to ATP_VALUE: β’ sends a 183 Session Progress message and with the PSTN XML BearerCapability encoded XML_BC_VALUE and with PSTN XML ProgressIndicator body containing the progress descriptions "Terminating access ISDN"(#7). SIP Parameter values: INVITE; PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 183 Session Progress; PSTN XML BearerCapability: ISDN_BC_VALUE ISUP Parameter values: ACM; CPS indicator: no indication, ISUP indicator: ISUP is used all the way ISDN access indicator: ISDN TMU: TMU_VALUE ATP: BC ATP_VALUE Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM 180 Ringing CPG Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 50 Values and selection criteria for test purpose TP104014 Test purposes ACM Parameter values 183 Session Progress Parameter values: INVITE parameter value VA_01 TMU_VALUE: speech ATP_VALUE: no BC PSTN XML BC_VALUE: speech INVITE_BC1: speech INVITE_BC2: unrestricted digital information with tones and announcements VA_02 TMU_VALUE: 3,1 kHz ATP_VALUE: no BC PSTN XML BC_VALUE: 3,1 kHz audio INVITE_BC1: 3,1 kHz audio INVITE_BC2: unrestricted digital information with tones and announcements VA_03 TMU_VALUE: speech ATP_VALUE: BC = 3,1 kHz PSTN XML BC_VALUE: 3,1 kHz audio INVITE_BC1: 3,1 kHz audio INVITE_BC2: unrestricted digital information with tones and announcements VA_04 TMU_VALUE: speech ATP_VALUE: BC = speech PSTN XML BC_VALUE: speech INVITE_BC1: speech INVITE_BC2: unrestricted digital information with tones and announcements VA_05 TMU_VALUE: 3,1 kHz ATP_VALUE: BC = speech PSTN XML BC_VALUE: speech INVITE_BC1: speech INVITE_BC2: unrestricted digital information with tones and announcements VA_06 TMU_VALUE: 3,1 kHz audio ATP_VALUE: BC = 3,1 kHz audio PSTN XML BC_VALUE: 3,1 kHz audio INVITE_BC1: 3,1 kHz audio INVITE_BC2: unrestricted digital information with tones and announcements ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 51 TP104015 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4A ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: Fallback occurs in the early ACM mapping of HLC und BC in ATP into 183 PSTN XML ProgressIndicators Ensure that the SUT on receipt of an ACM message where the CPS indicator is set to "no indication", the ISUP indicator is set to "ISUP is used all the way", the ISDN access indicator is set to "ISDN" and containing an Access Transport Parameter (ATP) including a High Layer Compatibility (HLC) and containing the progress indicator #5: "interworking has occurred and has resulted in a telecommunication service change": β’ sends a 183 Session Progress message with PSTN XML ProgressIndicator with the progress indication "interworking has occurred and has resulted in a telecommunication service change" (#5) "Terminating access ISDN"(#7) and with the PSTN XML HighLayerCapability. SIP Parameter values: INVITE: HLC: HLC_VALUE1 (PIXIT), HLC_VALUE2 (PIXIT) 180 Session Progress; PSTN XML ProgressIndicator: interworking has occurred and has resulted in a telecommunication service change (#5) PSTN XML HighLayerCapability: HLC_VALUE2 (PIXIT) ISUP Parameter values: ACM; CPS indicator: no indication, ISUP indicator: ISUP is used all the way ISDN access indicator: ISDN ATP: progress indicator: interworking has occurred and has resulted in a telecommunication service change (#5) HLC: HLC_VALUE2 (PIXIT) Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM 180 Ringing CPG Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 52 TP104016 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: ACM received, mapping of ATP HLC and PI #5 into 180 PSTN XML ProgressIndicators Ensure that the SUT on receipt of an ACM message where the CPS indicator is set to "subscriber free", the ISUP indicator is set to "ISUP is used all the way", the ISDN access indicator is set to "ISDN" and containing an Access Transport Parameter (ATP) including a High Layer Compatibility (HLC) and containing the progress indicator #5: "interworking has occurred and has resulted in a telecommunication service change": β’ sends an 180 Ringing message with PSTN XML ProgressIndicator with the progress indication "interworking has occurred and has resulted in a telecommunication service change" (#5) "Terminating access ISDN"(#7) and with the PSTN XML HighLayerCapability. SIP Parameter values: INVITE: PSTN XML HighLayerCapability: HLC_VALUE1 (PIXIT), HLC_VALUE2 (PIXIT) 180 Ringing; PSTN XML ProgressIndicator: interworking has occurred and has resulted in a telecommunication service change (#5) PSTN XML HighLayerCapability.: HLC_VALUE2 (PIXIT) ISUP Parameter values: ACM; CPS indicator: subscriber free, ISUP indicator: ISUP is used all the way ISDN access indicator: ISDN ATP: progress indicator: interworking has occurred and has resulted in a telecommunication service change (#5) HLC: HLC_VALUE2 (PIXIT) Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 53 TP104017 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 4/15 AND PICS 4/18 ISUP selection criteria: Test purpose: ACM free terminating access ISDN received. Sending of 180 containing a P-Early-Media header Ensure that SUT on receipt of an ACM message where the CPS indicator is set to "subscriber free" and if the I-MGCF has received the P-Early-Media header in the INVITE request, and has not already sent a provisional response including a P-Early-Media header with parameters indicating authorization of early media, then the I-MGCF shall: β’ send the 180 Ringing response with a P-Early-Media header authorizing early media SIP Parameter values: INVITE: P-Early-Media header , SDP audio xxxx RTP/AVP 8 180 Ringing: P-Early-Media header ISUP Parameter values: ACM; CPS indicator: free, Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP104018 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: ACM free received contains an ATP conveying the LLC, mapping into the PSTN XML LLC in the sent 180 Ensure that the SUT on receipt of an ACM message containing the LLC parameter in the ATP set to LLC_VALUE: β’ sends 180 response with a PSTN XML LowLayerCompatibility information element set to LLC_VALUE SIP Parameter values: 180: PSTN XML LowLayerCompatibility: LLC_VALUE (PIXIT) ISUP Parameter values: ACM; ATP LLC: LLC_VALUE Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 54 TP104019 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Address complete message (ACM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: ACM no indication received contains an ATP conveying the LLC, mapping into the PSTN XML LLC in the sent 183 Ensure that the SUT on receipt of an early ACM message containing the LLC parameter in the ATP set to LLC_VALUE: β’ sends 183 Session Progress response with a PSTN XML LowLayerCompatibility information element set to LLC_VALUE SIP Parameter values: 183: PSTN XML LowLayerCompatibility: LLC_VALUE (PIXIT) ISUP Parameter values: ACM; ATP LLC: LLC_VALUE Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM 180 Ringing CPG Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1.5 Receipt of the Call progress message (CPG)
|
TP105001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: NOT PICS 4/15 ISUP selection criteria: Test purpose: CPG Alerting is mapped into a 180 ringing Ensure that the SUT, having received the ACM message called party status indicator "no indication", on receipt of a CPG message where the event information is set to "Alerting": β’ the 180 Ringing SIP response is sent. SIP Parameter values: ISUP Parameter values: ACM: Called party status "no indication" CPG; event information: Alerting Comments: SIP SUT ISUP INVITE IAM ACM (no indication) 180 Ringing CPG (Alerting) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 55 TP105002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: NOT PICS 4/15 ISUP selection criteria: Test purpose: CPG Progress is not interworked Ensure that the SUT, having received the ACM message called party status indicator "no indication", on receipt of a CPG message where the event information is set to "Progress": β’ the CPG is not interworked. SIP Parameter values: ISUP Parameter values: ACM: Called party status "no indication" CPG; event information: Progress Comments: SIP SUT ISUP INVITE IAM ACM (no indication) CPG (Progress) 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP105003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: NOT PICS 4/15 ISUP selection criteria: Test purpose: CPG "in-band information or an appropriate pattern is now available" is not interworked Ensure that the SUT, having received the ACM message called party status indicator "no indication", on receipt of a CPG message where the event information is set to "in-band information or an appropriate pattern is now available": β’ the CPG is not interworked. SIP Parameter values: ISUP Parameter values: ACM: Called party status "no indication" CPG; event information: in-band-information or an appropriate pattern is now available Comments: SIP SUT ISUP INVITE IAM ACM (no indication) CPG (Inband info) 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 56 TP105004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4A TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: PICS 4/15 ISUP selection criteria: Test purpose: CPG "in-band information or an appropriate pattern is now available" is interworked, a P-Early-Media header is sent Ensure that the SUT, having received the ACM message called party status indicator "no indication", on receipt of a CPG message where the event information is set to "in-band information or an appropriate pattern is now available": β’ a 183 Session Progress is sent containing the P-Early-Media Header. SIP Parameter values: 183 Session Progress: P-Early-Media Header ISUP Parameter values: ACM: Called party status "no indication" CPG; event information: in-band-information or an appropriate pattern is now available Comments: SIP SUT ISUP INVITE IAM ACM (no indication) 183 Session Progress CPG (Inband info) 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP105005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: PICS 4/15 AND PICS 4/18 ISUP selection criteria: Test purpose: CPG Alerting received, 180 containing a P-Early-Media header is sent Ensure that the SUT, having received the ACM message, on receipt of a CPG message where the event information is set to "Alerting" without BCI included: β’ sends an 180 Ringing response with P-Early Media SIP Parameter values: 180 Ringing PSTN XML ProgressIndicator PI_ID, P-Early-Media ISUP Parameter values: CPG; event information: Alerting Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM (no indication) 180 Ringing CPG (Alerting) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 57 TP105006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: CPG Alerting contains an ATP with Progress Indicator Ensure that SUT having received the ACM message, on receipt of a CPG message where the event information is set to "Alerting" and the ATP containing the progress indicator PI_VALUE: β’ sends an 180 Ringing response with PSTN XML body containing containing PSTN XML ProgressIndicator set to PI_VALUE. SIP Parameter values: 180 Ringing PSTN XML progress indicator PI_ID ISUP Parameter values: CPG; event information: Alerting, ATP containing the ProgressIndicator PI_VALUE Comments: SIP SUT ISUP INVITE IAM ACM (no indication) 180 Ringing CPG (Alerting) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP105007 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: CPG Alerting containing a BCI and OBCI, mapping into PSTN XML instance Ensure that the SUT having received the ACM message, on receipt of a CPG message where the event information is set to " Alerting" the ISUP indicator parameter set to ISUP_ID, the ISDN access indicator set to ISDN_ACCES_ID and the OBCI in-band information set to OBCI_INBAND: β’ sends an 180 Ringing response with P-Early Media and PSTN XML body containing with the progress indicator information element set to PI_ID. SIP Parameter values: 180 Ringing PSTN XML ProgressIndicator PI_ID ISUP Parameter values: CPG; event information: Alerting, optional backward call indicator: Inband info Comments: SIP SUT ISUP INVITE IAM ACM (no indication) 180 Ringing CPG (Alerting) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 58 Values for test purposes TP105007 test purposes ISUP Parameter values: PSTN XML progress descriptions: VA_01 CPG ISUP_ID: ISUP not used all the way PI_ID: Call is not end-to-end ISDN (#1) VA_02 CPG ISUP_ID: ISUP used all the way ISDN_ACCES_ID: non ISDN OBCI_INBAND: no PI_ID: Destination address is non-ISDN (#2) VA_03 CPG ISUP_ID: ISUP used all the way ISDN_ACCES_ID: non ISDN OBCI_INBAND: yes PI_ID: Destination address is non-ISDN (#2) and In-band information or appropriate pattern now available (#8) VA_04 CPG ISUP_ID: ISUP used all the way ISDN access indicator: ISDN PI_ID: ("Terminating access ISDN"(#7))0. VA_05 CPG ISUP_ID: ISUP used all the way ISDN access indicator: ISDN OBCI_INBAND: yes PI_ID: In-band information or appropriate pattern now available (#8) and ("Terminating access ISDN"(#7)) TP105008 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4A ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: CPG Progress containing a BCI and OBCI, mapping into PSTN XML instance Ensure that the SUT, having received the ACM message, on receipt of a CPG message where the event information is set to "Progress" and the ISUP indicator parameter set to CPG_ISUP_ID, the ISDN access indicator set to CPG_ISDN_ACCESS_ID and the OBCI in-band information set to OBCI_INBAND: β’ sends a 183 Session Progress with PSTN XML body containing the progress indicator set to PI_ID. SIP Parameter values: 183 Session Progress PSTN XML progress indicator PI_ID ISUP Parameter values: CPG; event information: Progress ISUP indicator: CPG_ISUP_ID ISDN access indicator: CPG_ISDN_ACCESS_ID Comments: SIP SUT ISUP INVITE IAM 183 Session Progress ACM (no indication) 183 Session Progress CPG (Progress) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 59 Values for test purposes TP105008 Test purposes ISUP Parameter values: ISDN Parameter values: VA_01 CPG CPG_ISUP_ID: ISUP not used all the way PI_ID: Call is not end-to-end ISDN (#1) VA_02 CPG CPG_ISUP_ID: ISUP used all the way CPG_ISDN_ACCES_ID: non ISDN PI_ID: Destination address is non-ISDN (#2) VA_03 CPG CPG_ISUP_ID: ISUP used all the way CPG_ISDN access indicator: ISDN PI_ID: ("Terminating access ISDN"(#7). TP105009 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4A ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: PICS 4/15 AND PICS 4/18 ISUP selection criteria: Test purpose: CPG In-band information or an appropriate pattern is now available containing a BCI and OBCI, mapping into PSTN XML instance and P-Early-Media header Ensure that the SUT, having received the ACM message, on receipt of a CPG message where the event information is set to "In-band information or an appropriate pattern is now available", the ISUP indicator set to CPG_ISUP_ID and the ISDN access indicator set to CPG_ISDN_ACCESS_ID and if the I-MGCF has received the P-Early-Media header in the INVITE request, then the I- MGCF shall: β’ send a 183 Session Progress with P-Early Media and PSTN XML body containing the ProgressIndicator set to PI_ID. SIP Parameter values: 183 Session Progress with P-Early Media and PSTN XML ProgressIndicator: PI_ID ISUP Parameter values: CPG; event information: In-band information or an appropriate pattern is now available ISUP indicator: CPG_ISUP_ID ISDN access indicator: CPG_ISDN_ACCES_ID Comments: SIP SUT ISUP INVITE IAM ACM (no indication) 183 Session Progress CPG (In-band info) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC Values for test purposes TP105009 Test purposes ISUP Parameter values: ISDN Parameter values: VA_01 CPG CPG_ISUP_ID: ISUP used all the way CPG_ISDN_ACCES_ID: ISDN PI_ID: In-band information or appropriate pattern now available (#8) and "Terminating access ISDN"(#7). VA_02 CPG CPG_ISUP_ID: ISUP used all the way CPG_ISDN_ACCES_ID: non-ISDN PI_ID: In-band information or appropriate pattern now available (#8) and Destination address is non-ISDN (#2) VA_03 CPG CPG_ISUP_ID: ISUP not used all the way PI_ID: In-band information or appropriate pattern now available (#8) and Call is not end-to-end ISDN (#1) ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 60 TP105010 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.4.1 ETS 300 356-1 [28], clause 2.1.4 TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: Fallback procedure: CPG Alerting received, mapping of TMU and BC in the included ATP into 180 Ensure that the SUT, having received the ACM message, on receipt of a CPG message where the event information is set to " Alerting" and the Transmission medium used is included with the value TMU_VALUE and the Access Transport Parameter is set to ATP_VALUE: β’ sends an 180 Ringing message with the PSTN XML BearerCapability encoded ISDN_BC_VALUE. SIP Parameter values: INVITE; first Bearer Capability: INVITE_BC1 second Bearer Capability: INVITE_BC2 180 Ringing; PSTN XML BearerCapability: ISDN_TMU_VALUE ISUP Parameter values: CPG; event information: Alerting TMU: TMU_VALUE ATP: BC ATP_VALUE Comments: SIP SUT ISUP INVITE IAM ACM (no indication) 180 Ringing CPG (Alerting) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 61 TP105011 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.4.1 TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: Fallback procedure: CPG Progress received, mapping of TMU and BC in the included ATP into a 183 Ensure that the SUT, having received the ACM message, on receipt of a CPG message where the event information is set to "Progress" and the Transmission medium requirement is included with the value TMU_VALUE and the Access Transport Parameter is set to ATP_VALUE: β’ sends a 183 Session Progress message with the PSTN XML BearerCapability encoded ISDN_BC_VALUE. SIP Parameter values: INVITE; first BearerCapability: INVITE_BC1 second BearerCapability: INVITE_BC2 180 Session Progress; PSTN XML BearerCapability: ISDN_BC_VALUE ISUP Parameter values: CPG; event information: Progress TMU: TMU_VALUE ATP: BC: ATP_VALUE Comments: SIP SUT ISUP INVITE IAM ACM (no indication) 183 Session Progress CPG (Progress) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC Values and selection criteria for test purposes TP105010 TP105011 Test purposes ACM Parameter values 180 Ringing Parameter values: INVITE parameter value VA_01 TMU_VALUE: speech ATP_VALUE: no BC ISDN_BC_VALUE: speech INVITE_BC1: speech INVITE_BC2: unrestricted digital information with tones and announcements VA_02 TMU_VALUE: 3,1 kHz ATP_VALUE: no BC ISDN_BC_VALUE: 3,1 kHz audio INVITE_BC1: 3,1 kHz audio INVITE_BC2: unrestricted digital information with tones and announcements VA_03 TMU_VALUE: speech ATP_VALUE: BC = 3,1 kHz ISDN_BC_VALUE: 3,1 kHz audio INVITE_BC1: 3,1 kHz audio INVITE_BC2: unrestricted digital information with tones and announcements VA_04 TMU_VALUE: speech ATP_VALUE: BC = speech ISDN_BC_VALUE: speech INVITE_BC1: speech INVITE_BC2: unrestricted digital information with tones and announcements VA_05 TMU_VALUE: 3,1 kHz ATP_VALUE: BC = speech ISDN_BC_VALUE: speech INVITE_BC1: speech INVITE_BC2: unrestricted digital information with tones and announcements VA_06 TMU_VALUE: 3,1 kHz audio ATP_VALUE: BC = 3,1 kHz audio ISDN_BC_VALUE: 3,1 kHz audio INVITE_BC1: 3,1 kHz audio INVITE_BC2: unrestricted digital information with tones and announcements ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 62 TP105012 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.4.1 TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: CPG Alerting received, sending of received PI #5 and HLC in an ATP into a PSTN XML PI and HLC in the 180 Ensure that the SUT, having received the ACM message, on receipt of a CPG message where the event information is set to " Alerting" and containing an Access Transport Parameter including a High Layer Compatibility (HLC) and containing the progress indicator #5: "interworking has occurred and has resulted in a telecommunication service change": β’ sends an 180 Ringing message with a PSTN XML ProgressIndicator with the progress indication "interworking has occurred and has resulted in a telecommunication service change" (#5) and with the PSTN XML HighLayerCapability. SIP Parameter values: INVITE: PSTN XML HighLayerCompatibility: HLC_VALUE1 (PIXIT), HLC_VALUE2 (PIXIT) 180 Ringing; PSTN XML ProgressIndicator: interworking has occurred and has resulted in a telecommunication service change (#5) PSTN XML HighLayerCapability: HLC_VALUE2 (PIXIT) ISUP Parameter values: CPG; event information: Alerting progress indicator: interworking has occurred and has resulted in a telecommunication service change (#5) HLC: HLC_VALUE2 (PIXIT) Comments: SIP SUT ISUP INVITE IAM ACM (no indication) 180 Ringing CPG (Alerting) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 63 TP105013 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.4A TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: CPG Progress received, sending of received PI #5 and HLC in an ATP in a PSTN XML PI and HLC in the 183 Ensure that the SUT, having received the ACM message, on receipt of a CPG message where the event information is set to "Progress" and containing an Access Transport Parameter (ATP) including a High Layer Compatibility (HLC) and containing the progress indicator #5: "interworking has occurred and has resulted in a telecommunication service change": β’ sends an 183 Session Progress message with a PSTN XML ProgressIndicator with the progress indication "interworking has occurred and has resulted in a telecommunication service change" (#5) and with the PSTN XML HighLayerCapability. SIP Parameter values: INVITE: PSTN XML HighLayerCapability: HLC_VALUE1 (PIXIT), HLC_VALUE2 (PIXIT) 183 Session Progress; PSTN XML ProgressIndicator: interworking has occurred and has resulted in a telecommunication service change (#5) PSTN XML HighLayerCapability: HLC_VALUE2 (PIXIT) ISUP Parameter values: CPG; event information: Progress ATP: progress indicator: interworking has occurred and has resulted in a telecommunication service change (#5)High Layer Capability: HLC_VALUE2 (PIXIT) Comments: SIP SUT ISUP INVITE IAM ACM (no indication) 183 Session Progress CPG (Progress) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 64 TP105014 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.4A TSS reference: SIP-ISUP/Basic call/ Receipt of the Call progress message (CPG). SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: CPG Progress containing ATP PI, mapping into PSTN XML ProgressIndicator in the sent 183 Ensure that the SUT having received the ACM message, on receipt of a CPG message where the event information is set to "Progress", the ATP contains the progress indicator set to PI-VALUE, the BCI ISUP indicator parameter set to ISUP used all the way and the BCI ISDN access indicator set to ISDN: β’ sends a 183 Session Progress message with the PSTN XML ProgressIndicator information element set to PI_ID. SIP Parameter values: 183 Session Progress; PSTN XML ProgressIndicator: PI_ID and "Terminating access ISDN"(#7) ISUP Parameter values: ACM; BCI ISUP indicator: ISUP used all the way BCI ISDN access indicator: non ISDN CPG; event information: Progress BCI ISUP indicator: ISUP used all the way BCI ISDN access indicator: ISDN ATP Progress Indicator value PI_ID Comments: SIP SUT ISUP INVITE IAM ACM (no indication) 183 Session Progress CPG (Progress) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC Values and additional selection criteria for test purpose TP105014 VA_01 PI_ID = Call is not end-to-end ISDN (#1) VA_02 PI_ID = Destination address is non-ISDN (#2) ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 65
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1.6 Receipt of the Answer message (ANM)
|
TP106001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (ANM). SIP selection criteria: ISUP selection criteria: Test purpose: ANM received, a 200 OK INVITE is sent Ensure that the SUT, having received the ACM message Called party status indicator set to "subscriber free", on receipt of an ANM message: β’ sends a 200 OK INVITE to the UAC. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM (free) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP106002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (ANM). SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: ANM received, mapping of PI contained in the ATP into the 200 OK PSTN XML PI Ensure that the SUT, having received the ACM message, on receipt of an ANM message containing a progress indicator set to PI_VALUE in the ATP: β’ sends a 200 OK included the PSTN XML ProgressIndicator set to PI_VALUE. SIP Parameter values: 200 OK; PSTN XML ProgressIndicator: PI_VALUE (PIXIT) ISUP Parameter values: ANM; ATP progress indicator: PI_VALUE (PIXIT) Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM (free) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 66 TP106003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (ANM). SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: Fallback procedure: ANM received no BC in an ATP, mapping of TMU parameter into the PSTM XML PI sent in the 200 OK INVITE Ensure that the SUT, having received the ACM message, on receipt of an ANM message containing the Transmission Medium Used set to TMU_VALUE and the ATP without Bearer Capability (BC): β’ sends a 200 OK message with the PSTN XML Bearer Capability encoded ISDN_BC_VALUE. SIP Parameter values: INVITE: PSTN XML first Bearer Capability: SETUP_BC1 PSTN XML second Bearer Capability: SETUP_BC2 200 OK; Bearer capability: ISDN_BC_VALUE ISUP Parameter values: ANM; TMU: TMU_VALUE ATP: no BC Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM (free) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC Values for test purposes TP106003 Test purposes ANM parameter values 200 OK parameter values SETUP parameter values VA_01 TMU_VALUE: speech ISDN_BC_VALUE: speech SETUP_BC1: speech SETUP_BC2: unrestricted digital information with tones and announcements VA_02 TMU_VALUE: 3,1 kHz audio ISDN_BC_VALUE: 3,1 kHz audio SETUP_BC1: 3,1 kHz audio SETUP_BC2: unrestricted digital information with tones and announcements ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 67 TP106004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (ANM). SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: Fallback procedure: ANM received BC in an ATP, mapping of TMU parameter and BC into the PSTM XML PI sent in the 200 OK INVITE Ensure that the SUT , having received the ACM message, on receipt of an ANM message containing the Transmission Medium Used set to TMU_VALUE and the ATP set to ATP_VALUE and containing the progress indicator set to "interworking has occurred and has resulted in a telecommunication service change" (#5): β’ sends a 200 OK message with the PSTN XML BearerCapability encoded ISDN_BC_VALUE and the PSTN XML ProgressIndicator set to "interworking has occurred and has resulted in a telecommunication service change" (#5). SIP Parameter values: INVITE: PSTN XML first BearerCapability: SETUP_BC1 PSTN XML second Bearer Capability: SETUP_BC2 200 OK; PSTN XML BearerCapability: ISDN_BC_VALUE ProgressIndication: interworking has occurred and has resulted in a telecommunication service change(#5) ISUP Parameter values: ANM; TMU: TMU_VALUE ATP: ATP_VALUE Progress indication: interworking has occurred and has resulted in a telecommunication service change(#5) Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM (free) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC Values for test purposes TP106004 Test purposes ACM parameter values 200 OK parameter values SETUP parameter values VA_01 TMU_VALUE: speech ATP_VALUE: speech ISDN_BC_VALUE: speech and ProgressIndicator: (#5) SETUP_BC1: speech SETUP_BC2: unrestricted digital information with tones and announcements VA_02 TMU_VALUE: speech ATP_VALUE: 3,1 kHz audio ISDN_BC_VALUE: 3,1 kHz audio and ProgressIndicator: (#5) SETUP_BC1: 3,1 kHz audio SETUP_BC2: unrestricted digital information with tones and announcements VA_03 TMU_VALUE: 3,1 kHz audio ATP_VALUE: speech ISDN_BC_VALUE: speech and ProgressIndicator: (#5) SETUP_BC1: speech SETUP_BC2: unrestricted digital information with tones and announcements VA_04 TMU_VALUE: 3,1 kHz audio ATP_VALUE: 3,1 kHz audio ISDN_BC_VALUE: 3,1 kHz audio and ProgressIndicator: (#5) SETUP_BC1: 3,1 kHz audio SETUP_BC2: unrestricted digital information with tones and announcements ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 68 TP106005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (ANM). SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: Fallback procedure: ANM received contains an ATP with BC unrestricted digital information with tones/announcement, mapping into the PSTN XML PI in the sent 200 OK INVITE Ensure that the SUT, having received the ACM message, on receipt of an ANM message containing the ATP including the Bearer Capability set to "unrestricted digital information with tones/announcement" and without TMU parameter: β’ sends a 200 OK message with the PSTN XML Bearer Capability set to "unrestricted digital information with tones/announcement". SIP Parameter values: 200 OK; PSTN XML BearerCapabilty: unrestricted digital information with tones/announcement ISUP Parameter values: ANM; ATP BC: unrestricted digital information with tones/announcement no TMU Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM (free) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP106006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (ANM). SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: ANM received contains an ATP parameter, mapping of HLC into the PSTN HLC in the 200 OK INVITE Ensure that the SUT, having received the ACM message, on receipt of an ANM message containing the HLC parameter in the ATP set to HLC_VALUE: β’ sends a 200 OK message PSTN XML HighLayerCompatibility information element set to HLC_VALUE. SIP Parameter values: 200 OK; PSTN XML HighLayerCompatibility: HLC_VALUE (PIXIT) ISUP Parameter values: ANM; ATP HLC: HLC_VALUE Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM (free) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 69 TP106007 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (ANM). SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: Fallback procedure: ANM received contains an ATP with HLC and PI #5, mapping into the PSTN XML PI in the sent 200 OK INVITE Ensure that the SUT, having received the ACM message, on receipt of an ANM message containing the HLC parameter in the ATP with an HLC set to HLC_VALUE and the progress indicator set to "interworking has occurred and has resulted in a telecommunication service change" (#5): β’ sends a 200 OK message with the PSTN XML HighLayerCompatibility information element set to HLC_VALUE and the progress indicator set to "interworking has occurred and has resulted in a telecommunication service change" (#5). SIP Parameter values: INVITE: PSTN XML HighLayerCompatibility: HLC_VALUE1 (PIXIT), HLC_VALUE2 (PIXIT) 200 OK; PSTN XML HighLayerCompatibility: HLC_VALUE2 (PIXIT) PSTN XML ProgressIndicator: interworking has occurred and has resulted in a telecommunication service change (#5) ISUP Parameter values: ANM; ATP HLC: HLC_VALUE2 progress indicator: interworking has occurred and has resulted in a telecommunication service change (#5) Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM (free) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 70 TP106008 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (ANM). SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: ANM received contains an ATP conveying the LLC, mapping into the PSTN XML LLC in the sent 200 OK INVITE Ensure that the SUT, having received the ACM message, on receipt of an ANM message containing the LLC parameter in the ATP set to LLC_VALUE: β’ sends a 200 OK message with a PSTN XML LowLayerCompatibility information element set to LLC_VALUE. SIP Parameter values: 200 OK INVITE: PSTN XML LowLayerCompatibility: LLC_VALUE (PIXIT) ISUP Parameter values: ANM; ATP LLC: LLC_VALUE Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM (free) Ringing tone 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 71
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1.7 Receipt of the Connect message (CON)
|
TP107001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: SIP-ISUP/Basic call/ Receipt of the CONNECT message (CON). SIP selection criteria: PICS 4/1 AND PICS 4/4 AND PICS 4/5 ISUP selection criteria: Test purpose: CON received, 200 OK INVITE is sent after Preconditions are met SDP offer was received in the initial INVITE. Ensure that the SUT, on receipt of an CON message: sends a 200 OK INVITE to the UAC. The bearer path shall be connected in both directions when both of the following conditions are satisfied: β’ the I-MGCF determines (using the procedures defined in RFC 3312 [7]) that sufficient preconditions have been satisfied on the SIP side for session establishment to proceed (if applicable). In addition, if BICC is performing the "Per-call bearer set-up in the forward direction" Outgoing bearer set-up procedure and the Connect Type is "notification not required", the bearer path shall be connected in both directions when the Bearer Set-up request is sent and the I-IWU determines (through the procedures defined in RFC 3312 [7]) that sufficient preconditions have been met for the session to proceed. SIP Parameter values: INVITE: Require: precondition SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 183 Session Progress PRACK 200 OK PRACK UPDATE COT(successful) 200 OK UPDATE 200 OK INVITE CON ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 72 TP107002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: SIP-ISUP/Basic call/ Receipt of the CONNECT message (CON). SIP selection criteria: NOT PICS 4/1 AND PICS 4/4 AND PICS 4/5 ISUP selection criteria: Test purpose: CON received, 200 OK INVITE is sent after Preconditions are met SDP offer was received in the initial INVITE. Ensure that the SUT, on receipt of an CON message: sends a 200 OK INVITE to the UAC. The bearer path shall be connected in both directions when both of the following conditions are satisfied: β’ the I-MGCF determines (using the procedures defined in RFC 3312 [7]) that sufficient preconditions have been satisfied on the SIP side for session establishment to proceed (if applicable). In addition, if BICC is performing the "Per-call bearer set-up in the forward direction" Outgoing bearer set-up procedure and the Connect Type is "notification not required", the bearer path shall be connected in both directions when the Bearer Set-up request is sent and the I-IWU determines (through the procedures defined in RFC 3312 [7]) that sufficient preconditions have been met for the session to proceed. SIP Parameter values: INVITE: Require: precondition SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv ISUP Parameter values: Comments: SIP SUT ISUP INVITE 183 Session Progress PRACK 200 OK PRACK UPDATE IAM 200 OK UPDATE 200 OK INVITE CON ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 73 TP107003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: SIP-ISUP/Basic call/ Receipt of the CONNECT message (CON). SIP selection criteria: ISUP selection criteria: Test purpose: CON received, 200 OK INVITE is sent SDP offer was received in the initial INVITE. Ensure that the SUT, on receipt of an CON message: sends a 200 OK INVITE to the UAC. The bearer path shall be connected in both directions. In addition, if BICC is performing the "Per-call bearer set-up in the forward direction" Outgoing bearer set-up procedure and the Connect Type is "notification not required", the bearer path shall be connected in both directions when the Bearer Set-up request is sent and the I-IWU determines (through the procedures defined in RFC 3312 [7]) that sufficient preconditions have been met for the session to proceed. SIP Parameter values: INVITE: SDP offer 200 OK INVITE: SDP answer ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 200 OK INVITE CON ACK Conversation BYE REL 200 OK BYE RLC TP107004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (ANM). SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: CON received contains a PI conveyed in an ATP, mapped into the PSTN XML PI sent in the 200 OK INVITE Ensure that the SUT, on receipt of an CON message containing a progress indicator set to PI_VALUE in the ATP: β’ sends a 200 OK included the PSTN XML ProgressIndicator set to PI_VALUE. SIP Parameter values: 200 OK; PSTN XML ProgressIndicator: PI_VALUE (PIXIT) ISUP Parameter values: ANM; ATP progress indicator: PI_VALUE (PIXIT) Comments: SIP SUT ISUP INVITE IAM 200 OK INVITE CON ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 74 TP107005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (CON). SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: CON received contains the TMU parameter, mapping into the PSTN XML BC sent in the 200 OK INVITE Ensure that the SUT, on receipt of an CON message containing the Transmission Medium Used set to TMU_VALUE and the ATP without Bearer Capability (BC): β’ sends a 200 OK message with the PSTN XML BearerCapability encoded ISDN_BC_VALUE. SIP Parameter values: INVITE: PSTN XML first Bearer Capability: SETUP_BC1 PSTN XML second Bearer Capability: SETUP_BC2 200 OK; Bearer capability: ISDN_BC_VALUE ISUP Parameter values: CON; TMU: TMU_VALUE ATP: no BC Comments: SIP SUT ISUP INVITE IAM 200 OK INVITE CON ACK Conversation BYE REL 200 OK BYE RLC Values for test purposes TP107005 Test purposes CON parameter values 200 OK parameter values SETUP parameter values VA_01 TMU_VALUE: speech ISDN_BC_VALUE: speech SETUP_BC1: speech SETUP_BC2: unrestricted digital information with tones and announcements VA_02 TMU_VALUE: 3,1 kHz audio ISDN_BC_VALUE: 3,1 kHz audio SETUP_BC1: 3,1 kHz audio SETUP_BC2: unrestricted digital information with tones and announcements ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 75 TP107006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (CON). SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: CON received contains the TMU parameter and the ATP parameter conveying the PI #5, mapping into the PSTN XML PI sent in the 200 OK INVITE Ensure that the SUT , on receipt of an CON message containing the Transmission Medium Used set to TMU_VALUE and the ATP set to ATP_VALUE and containing the progress indicator set to "interworking has occurred and has resulted in a telecommunication service change" (#5): β’ sends a 200 OK message with the PSTN XML BearerCapability encoded ISDN_BC_VALUE and the PSTN XML ProgressIndicator set to "interworking has occurred and has resulted in a telecommunication service change" (#5). SIP Parameter values: INVITE: PSTN XML first BearerCapability: SETUP_BC1 second Bearer Capability: SETUP_BC2 200 OK; PSTN XML BearerCapability: ISDN_BC_VALUE ProgressIndication: interworking has occurred and has resulted in a telecommunication service change(#5) ISUP Parameter values: CON; TMU: TMU_VALUE ATP: BC ATP_VALUE Progress indication: interworking has occurred and has resulted in a telecommunication service change(#5) Comments: SIP SUT ISUP INVITE IAM 200 OK INVITE CON ACK Conversation BYE REL 200 OK BYE RLC Values for test purposes TP107006 Test purposes ACM parameter values 200 OK parameter values SETUP parameter values VA_01 TMU_VALUE: speech ATP_VALUE: BC speech ISDN_BC_VALUE: speech and ProgressIndicator: (#5) SETUP_BC1: speech SETUP_BC2: unrestricted digital information with tones and announcements VA_02 TMU_VALUE: speech ATP_VALUE: BC 3,1 kHz audio ISDN_BC_VALUE: 3,1 kHz audio and ProgressIndicator: (#5) SETUP_BC1: 3,1 kHz audio SETUP_BC2: unrestricted digital information with tones and announcements VA_03 TMU_VALUE: 3,1 kHz audio ATP_VALUE: BC speech ISDN_BC_VALUE: speech and ProgressIndicator: (#5) SETUP_BC1: speech SETUP_BC2: unrestricted digital information with tones and announcements VA_04 TMU_VALUE: 3,1 kHz audio ATP_VALUE: BC 3,1 kHz audio ISDN_BC_VALUE: 3,1 kHz audio and ProgressIndicator: (#5) SETUP_BC1: 3,1 kHz audio SETUP_BC2: unrestricted digital information with tones and announcements ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 76 TP107007 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (CON). SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: CON received contains the ATP parameter conveying the BC unrestricted digital information with tones/announcement, mapping into the PSTN XML BC sent in the 200 OK INVITE Ensure that the SUT, on receipt of an CON message containing the ATP including the Bearer Capability set to "unrestricted digital information with tones/announcement" and without TMU parameter: β’ sends a 200 OK message with the PSTN XML Bearer Capability set to "unrestricted digital information with tones/announcement". SIP Parameter values: 200 OK; PSTN XML BearerCapabilty: unrestricted digital information with tones/announcement ISUP Parameter values: CON; ATP BC: unrestricted digital information with tones/announcement no TMU Comments: INVITE IAM 200 OK INVITE CON ACK Conversation BYE REL 200 OK BYE RLC TP107008 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (CON). SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: CON received contains the ATP parameter conveying the HLC, mapping into the PSTN XML HLC sent in the 200 OK INVITE Ensure that the SUT, on receipt of an CON message containing the HLC parameter in the ATP set to HLC_VALUE: β’ sends a 200 OK message PSTN XML HighLayerCompatibility information element set to HLC_VALUE. SIP Parameter values: 200 OK; PSTN XML HighLayerCompatibility: HLC_VALUE (PIXIT) ISUP Parameter values: CON; ATP HLC: HLC_VALUE Comments: SIP SUT ISUP INVITE IAM 200 OK INVITE CON ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 77 TP107009 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (CON). SIP selection criteria: PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: CON received contains the ATP parameter conveying the HLC and PI #5, mapping into the PSTN XML HLC sent in the 200 OK INVITE Ensure that the SUT, on receipt of an CON message containing the HLC parameter in the ATP with an High Layer Compatibility set to HLC_VALUE and the Progress.indicator set to "interworking has occurred and has resulted in a telecommunication service change" (#5): β’ sends a 200 OK message with the PSTN XML HighLayerCompatibility information element set to HLC_VALUE and the progress indicator set to "interworking has occurred and has resulted in a telecommunication service change" (#5). SIP Parameter values: INVITE: PSTN XML HighLayerCompatibility: HLC_VALUE1 (PIXIT), HLC_VALUE2 (PIXIT) 200 OK; PSTN XML HighLayerCompatibility: HLC_VALUE2 (PIXIT) progress indicator: interworking has occurred and has resulted in a telecommunication service change (#5) ISUP Parameter values: CON; ATP HLC: HLC_VALUE2 progress indicator: interworking has occurred and has resulted in a telecommunication service change (#5) Comments: SIP SUT ISUP INVITE IAM 200 OK INVITE CON ACK Conversation BYE REL 200 OK BYE RLC TP107010 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 ETS 300 356-1 [28], clause 2.1.7 TSS reference: SIP-ISUP/Basic call/ Receipt of the Answer message (CON). SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: CON received contains an ATP conveying the LLC, mapping into the PSTN XML sent in the 200 OK INVITE Ensure that the SUT, having received the ACM message, on receipt of an CON message containing the LLC parameter in the ATP set to LLC_VALUE: β’ sends a 200 OK message wit a PSTN XML LowLayerCompatibility information element set to LLC_VALUE. SIP Parameter values: 200 OK; PSTN XML LowLayerCompatibility: LLC_VALUE (PIXIT) ISUP Parameter values: CON; ATP LLC: LLC_VALUE Comments: SIP SUT ISUP INVITE IAM 200 OK INVITE CON ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 78
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1.8 Receipt of the REL message
|
TP108001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8 TSS reference: SIP-ISUP /Basic call/ Receipt of the Release message (REL)/ SIP selection criteria: ISUP selection criteria: Test purpose: REL received after IAM was sent. Mapping into final response containing a Reason header Ensure that the SUT in the Idle state on receipt of a INVITE message, sending out an IAM message, on receipt of an ISUP REL, where the cause value defined as CV_ISUP: β’ the SUT immediately requests the disconnection of the internal bearer path. β’ the SUT shall send the appropriate SIP status defined as SIP_FAILURE_VA; β’ The ISUP Cause Value field in the ISUP REL message is mapped to the Reason header field. SIP Parameter values: cause value: CV_SIP (PIXIT) ISUP Parameter values: REL; cause value: CV_ISUP (PIXIT) Comments: SIP SUT ISUP INVITE IAM SIP_FAILURE_VA REL ACK RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 79 Table 4 Values for test purposes TP108001 βSIP Message SIP_FAILURE_VA CV_SIP β REL Cause Indicators parameter CV_ISUP VA_1 404 Not Found Cause Value No. 1 Cause Value No. 1 ("unallocated (unassigned) number") VA_2 500 Server Internal Error Cause Value No. 2 Cause Value No. 2 ("no route to network") VA_3 500 Server Internal Error Cause Value No. 3 Cause Value No. 3 ("no route to destination") VA_4 500 Server Internal Error Cause Value No. 4 Cause Value No. 4 ("Send special information tone") VA_5 404 Not Found Cause Value No. 5 Cause Value No. 5 ("Misdialled trunk prefix") VA_6 500 Server Internal Error Cause Value No. 8 Cause Value No. 8 ("Preemption") VA_7 500 Server Internal Error Cause Value No. 9 Cause Value No. 9 ("Preemption-circuit reserved for reuse") VA_8 486 Busy Here Cause Value No. 17 Cause Value No. 17 ("user busy") VA_9 480 Temporarily unavailable Cause Value No. 18 Cause Value No. 18 ("no user responding") VA_10 480 Temporarily unavailable Cause Value No. 19 Cause Value No. 19 ("no answer from the user") VA_11 480 Temporarily unavailable Cause Value No. 20 Cause Value No. 20 ("subscriber absent") VA_12 480 Temporarily unavailable Cause Value No. 21 Cause Value No. 21 ("call rejected") VA_13 410 Gone Cause Value No. 22 Cause Value No. 22 ("number changed") VA_14 480 Temporarily unavailable Cause Value No. 25 Cause Value No. 25 ("Exchange routing error") VA_15 502 Bad Gateway Cause Value No. 27 Cause Value No. 27 ("destination out of order") VA_16 484 Address Incomplete Cause Value No. 28 Cause Value No. 28 ("invalid number format (address incomplete")) VA_17 500 Server Internal Error Cause Value No. 29 Cause Value No. 29 ("facility rejected") VA_18 480 Temporarily unavailable Cause Value No. 31 Cause Value No. 31 ("normal unspecified") (Class default) VA_19 486 Busy here if Diagnostics indicator includes the (CCBS indicator = CCBS possible) else 480 Temporarily unavailable Cause Value No. 34 Cause Value in the Class 010 (resource unavailable, Cause Value No. 34) VA_20 500 Server Internal Error Cause Value No. 47 Cause Value in the Class 010 (resource unavailable, Cause Value No. 38 to 47) (47 is class default) VA_21 500 Server Internal Error Cause Value No. 50 Cause Value No. 50 ("requested facility not subscribed") VA_22 500 Server Internal Error Cause Value No. 55 Cause Value No. 55 ("incoming calls barred within CUG") VA_23 500 Server Internal Error Cause Value No. 57 Cause Value No. 57 ("bearer capability not authorized") VA_24 500 Server Internal Error Cause Value No. 58 Cause Value No. 58 ("bearer capability not presently") VA_25 500 Server Internal Error Cause Value No. 63 Cause Value No. 63 ("service option not available, unspecified") (Class default) VA_26 500 Server Internal Error Cause Value No. 65 - 79 Cause Value in the Class 100 (service or option not implemented Cause Value No. 65 - 79) (79 is class default) VA_27 500 Server Internal Error Cause Value No. 87 Cause Value No. 87 ("user not member of CUG") ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 80 Values for test purposes TP108001 βSIP Message SIP_FAILURE_VA CV_SIP β REL Cause Indicators parameter CV_ISUP VA_28 500 Server Internal Error Cause Value No. 88 Cause Value No. 88 ("incompatible destination") VA_29 500 Server Internal Error Cause Value No. 90 Cause Value No. 90 ("Non-existent CUG") VA_30 404 Not Found Cause Value No. 91 Cause Value No. 91 ("invalid transit network selection") VA_31 500 Server Internal Error Cause Value No. 95 Cause Value No. 95 ("invalid message") (Class default) VA_32 500 Server Internal Error Cause Value No. 97 Cause Value No. 97 ("Message type non-existent or not implemented") VA_33 500 Server Internal Error Cause Value No. 99 Cause Value No. 99 ("information element/parameter non- existent or not implemented") VA_34 480 Temporarily unavailable Cause Value No. 102 Cause Value No. 102 ("recovery on timer expiry") VA_35 500 Server Internal Error Cause Value No. 103 Cause Value No. 103 ("Parameter non-existent or not implemented, pass on") VA_36 500 Server Internal Error Cause Value No. 110 Cause Value No. 110 ("Message with unrecognized Parameter, discarded") VA_37 500 Server Internal Error Cause Value No. 111 Cause Value No. 111 ("protocol error, unspecified") (Class default) VA_38 480 Temporarily unavailable Cause Value No. 127 Cause Value No. 127 ("interworking unspecified") (Class default) TP108002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8 TSS reference: SIP-ISUP /Basic call/ Receipt of the Release message (REL)/ SIP selection criteria: PICS 4/15 ISUP selection criteria: Test purpose: REL after ACM received, mapping in a final response Ensure that the SUT in the Idle state on receipt of a INVITE message, sending out an IAM message, having received a ACM message where the CPS indicator is set to "no indication", on receipt of an ISUP REL, where the cause value defined as CV_ISUP: β’ the SUT immediately requests the disconnection of the internal bearer path. When the ISUP circuit is available for re-selection, an ISUP RLC is returned to the ISUP side; β’ the SUT shall send the appropriate SIP status defined as SIP_FAILURE_VA; β’ the ISUP Cause Value field in the ISUP REL message is mapped to the Reason header field. SIP Parameter values: cause value: CV_SIP (PIXIT) ISUP Parameter values: REL; cause value: CV_ISUP (PIXIT) Comments: SIP SUT ISUP INVITE IAM ACM (no indication) SIP_FAILURE_VA REL ACK RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 81 Table 5 Values for test purpose TP108002 βSIP Message SIP_FAILURE_VA CV_SIP β REL Cause Indicators parameter CV_ISUP, VA_1 486 Busy Here Cause Value No. 17 Cause Value No. 17 ("user busy") VA_2 480 Temporarily unavailable Cause Value No. 18 Cause Value No. 18 ("No user responding") VA_3 480 Temporarily unavailable Cause Value No. 21 Cause Value No. 21 ("all rejected") VA_4 410 Gone Cause Value No. 22 Cause Value No. 22 ("number changed") VA_5 502 Bad Gateway Cause Value No. 27 Cause Value No. 27 ("destination out of order") VA_6 484 Address Incomplete Cause Value No. 28 Cause Value No. 28 ("invalid number format (address incomplete") VA_7 480 Temporarily unavailable Cause Value No. 31 Cause Value No. 31 ("normal unspecified") (Class default) VA_8 500 Server Internal Error Cause Value No. 47 Cause Value in the Class 010 (resource unavailable, Cause Value No. 38 to 47) (47 is class default) VA_9 500 Server Internal Error Cause Value No. 63 Cause Value No. 63 ("service option not available, unspecified") (Class default) VA_10 500 Server Internal Error Cause Value No. 88 Cause Value No. 88 ("incompatible destination") VA_11 500 Server Internal Error Cause Value No. 111 Cause Value No. 111 ("protocol error, unspecified") (Class default) TP108003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8 TSS reference: SIP-ISUP /Basic call/ Receipt of the Release message (REL)/ SIP selection criteria: ISUP selection criteria: Test purpose: REL received in the early dialogue (ACM free) mapping in a final response Ensure that the SUT in the Idle state on receipt of a INVITE message, sending out an IAM message, having received a ACM message where the CPS indicator is set to "subscriber free", having sent a 180 Ringing message on receipt of an ISUP REL, where the cause value defined as CV_ISUP: β’ the SUT immediately requests the disconnection of the internal bearer path. When the ISUP circuit is available for re-selection, an ISUP RLC is returned to the ISUP side; β’ the SUT shall send the appropriate SIP status defined as SIP_FAILURE_VA; β’ the ISUP Cause Value field in the ISUP REL message is mapped to the Reason header field. SIP Parameter values: Cause value: CV_SIP (PIXIT) ISUP Parameter values: REL; Cause value: CV_ISUP (PIXIT) Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM (free) SIP_FAILURE_VA REL ACK RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 82 TP108004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8 TSS reference: SIP-ISUP /Basic call/ Receipt of the Release message (REL)/ SIP selection criteria: NOT PICS 4/15 ISUP selection criteria: Test purpose: REL received in the early dialogue (CPG Alerting) mapping in a final response Ensure that the SUT in the Idle state on receipt of a INVITE message, sending out an IAM message, having received a ACM message where the CPS indicator is set to "no indication", having received a CPG message where the event information parameter event indicator is set to "Alerting", a 180 Ringing message is sent, on receipt of an where the cause value defined as CV_ISUP: β’ the SUT immediately requests the disconnection of the internal bearer path. When the ISUP circuit is available for re-selection, an ISUP RLC is returned to the ISUP side; β’ the SUT shall send the appropriate SIP status defined as SIP_FAILURE_VA; β’ the ISUP Cause Value field in the ISUP REL message is mapped to the Reason header field. SIP Parameter values: Cause value: CV_SIP (PIXIT) ISUP Parameter values: REL; cause value: CV_ISUP (PIXIT) Comments: SIP SUT ISUP INVITE IAM ACM (no indication) 180 Ringing CPG (Alerting) SIP_FAILURE_VA REL ACK RLC Table 6 Values for test purposes TP108003 and TP108004 βSIP Message SIP_FAILURE_VA CV_SIP β REL Cause Indicators parameter CV_ISUP, VA_1 486 Busy Here Cause Value No. 17 Cause Value No. 17 ("user busy") VA_2 480 Temporarily unavailable Cause Value No. 18 Cause Value No. 18 ("No user responding") VA_3 480 Temporarily unavailable Cause Value No. 21 Cause Value No. 21 ("all rejected") VA_4 410 Gone Cause Value No. 22 Cause Value No. 22 ("number changed") VA_5 502 Bad Gateway Cause Value No. 27 Cause Value No. 27 ("destination out of order") VA_6 484 Address Incomplete Cause Value No. 28 Cause Value No. 28 ("invalid number format (address incomplete") VA_7 480 Temporarily unavailable Cause Value No. 31 Cause Value No. 31 ("normal unspecified") (Class default) VA_8 500 Server Internal Error Cause Value No. 47 Cause Value in the Class 010 (resource unavailable, Cause Value No. 38 to 47) (47 is class default) VA_9 500 Server Internal Error Cause Value No. 63 Cause Value No. 63 ("service option not available, unspecified") (Class default) VA_10 500 Server Internal Error Cause Value No. 88 Cause Value No. 88 ("incompatible destination") VA_11 500 Server Internal Error Cause Value No. 111 Cause Value No. 111 ("protocol error, unspecified") (Class default) ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 83 TP108005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8 TSS reference: SIP-ISUP /Basic call/ Receipt of the Release message (REL)/ SIP selection criteria: ISUP selection criteria: Test purpose: REL received in the confirmed state (ANM received) Ensure that the SUT in the Idle state on receipt of a INVITE message, sending out an IAM message, having received a ACM message, having received an ANM', a 200 OK message is sent, on receipt of an ISUP REL where the cause value defined as CV_ISUP: β’ the SUT immediately requests the disconnection of the internal bearer path. When the ISUP circuit is available for re-selection, an ISUP RLC is returned to the ISUP side; β’ the SUT shall send BYE message; β’ the ISUP Cause Value field in the ISUP REL message is mapped to the Reason header field in the BYE. SIP Parameter values: Cause value: CV_SIP (PIXIT) ISUP Parameter values: REL; cause value: CV_ISUP (PIXIT) Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM 200 OK INVITE ANM ACK Conversation BYE REL 200 OK BYE RLC TP108006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8 TSS reference: SIP-ISUP /Basic call/ Receipt of the Release message (REL)/ SIP selection criteria: ISUP selection criteria: Test purpose: REL received in the confirmed state (CON received) Ensure that the SUT in the Idle state on receipt of a INVITE message, sending out a IAM message, having received a CON message, a 200 OK message is sent, on receipt of an ISUP REL where the cause value defined as CV_ISUP: β’ the SUT immediately requests the disconnection of the internal bearer path. When the ISUP circuit is available for re-selection, an ISUP RLC is returned to the ISUP side; β’ the SUT shall send BYE message. β’ the ISUP Cause Value field in the ISUP REL message is mapped to the Reason header field. SIP Parameter values: Cause value: CV_SIP (PIXIT) ISUP Parameter values: REL; cause value: CV_ISUP (PIXIT) Comments: SIP SUT ISUP INVITE IAM 200 OK INVITE CON ACK Conversation BYE REL 200 OK BYE RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 84 Table 7 Values for test purposes TP108005 and TP108006 βSIP Message SIP_FAILURE_VA CV_SIP β REL Cause Indicators parameter CV_ISUP, VA_1 BYE Cause Value No. 16 Cause Value No. 16 VA_2 BYE Cause Value No. 31 Cause Value No. 31 ("normal unspecified") (Class default) VA_3 BYE Cause Value No. 38 Cause Value No. 38 ("Network out of order") VA_4 BYE Cause Value No. 41 Cause Value No. 41 ("Temporary failure ") VA_5 BYE Cause Value No. 111 Cause Value No. 111 ("protocol error, unspecified") (Class default)
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1.9 Autonomous release at I-MGCF
|
TP109001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.10 TSS reference: SIP-ISUP/Basic call/ Autonomous release at I-MGCF SIP selection criteria: ISUP selection criteria: PICS 3/3 AND NOT PICS 3/4 Test purpose: Overlap not supported, 484 is sent if insufficient digits received in the INVITE Ensure that the SUT on receipt of insufficient digits received in an INVITE messages: β’ sends an 484 Address Incomplete message. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE 484 Address incomplete ACK TP109002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.10 TSS reference: SIP-ISUP/Basic call/ Autonomous release at I-MGCF SIP selection criteria: ISUP selection criteria: Test purpose: 480 is sent if congestion in the SUT Ensure that the SUT in congestion on receipt of INVITE message: β’ sends an 480 Temporarily Unavailable message. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE 480 Temporarily unavailable ACK ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 85 TP109003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.10 TSS reference: SIP-ISUP/Basic call/ Autonomous release at I-MGCF SIP selection criteria: ISUP selection criteria: Test purpose: 500 is sent to due the compatibility procedure for unknown parameters Ensure that the call is released due to the BICC/ISUP compatibility procedure for unknown parameters: β’ sends 500 Server Internal Error. SIP Parameter values: ISUP Parameter values: Unknown parameter in ACM: Parameter compatibility "Release call" Comments: SIP SUT ISUP INVITE IAM ACM (???) 500 Server internal error REL ACK RLC TP109004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.10 TSS reference: SIP-ISUP/Basic call/ Autonomous release at I-MGCF SIP selection criteria: ISUP selection criteria: Test purpose: Call setup is cleared after T7 expiry Ensure that the call is released due to expiry of T7 within the BICC/ISUP procedures: β’ sends 484 Address Incomplete. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM Expiry of T7 484 Address incomplete REL ACK RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 86 TP109005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.10 TSS reference: SIP-ISUP/Basic call/ Autonomous release at I-MGCF SIP selection criteria: ISUP selection criteria: PICS 4/16 Test purpose: Call setup is cleared after T9 expiry Ensure that the call is released due expiry of T9 within the BICC/ISUP procedures: β’ sends 480 Temporarily Unavailable. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM Expiry of T9 480 Temporarily unavailable REL ACK RLC TP109006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.10 TSS reference: SIP-ISUP/Basic call/ Autonomous release at I-MGCF SIP selection criteria: ISUP selection criteria: Test purpose: 500 is sent to due the compatibility procedure for unknown messages Ensure that the call is released due to the BICC/ISUP compatibility procedure for unknown messages: β’ sends 500 Server Internal Error. SIP Parameter values: ISUP Parameter values: XXX: Unknown message: message compatibility "Release call" Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM XXX 500 Server internal error REL ACK RLC ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 87
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1.10 Receipt of the Release message BYE / CANCEL
|
TP110001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.6 TSS reference: SIP-ISUP/Basic call/ Receipt of the BYE message SIP selection criteria: ISUP selection criteria: Test purpose: BYE with Reason header received, sending of REL Ensure that the SUT on receipt of SIP BYE, the SUT shall send an ISUP REL to the ISUP side: β’ Ensure that the Reason header field with ITU-T Recommendation Q.850 [5] Cause Value is included in the BYE message is mapped to the ISUP Cause Value field in the ISUP REL message with the location "network beyond interworking point". SIP Parameter values: Protocol-cause: CV_Reason Header (PIXIT) ISUP Parameter values: REL: cause value: CV_ISUP (PIXIT) Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM 200 OK INVITE ANM ACK BYE REL 200 OK BYE RLC TP110002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.6 TSS reference: SIP-ISUP/Basic call/ Receipt of the CANCEL message SIP selection criteria: ISUP selection criteria: Test purpose: CANCEL with Reason header received, sending of REL Ensure that the SUT on receipt of SIP CANCEL, the I-MGCF shall send an ISUP REL to the ISUP side. β’ Ensure that the Reason header field with ITU-T Recommendation Q.850 [5] Cause Value is included in the CANCEL message is mapped to the ISUP Cause Value field in the ISUP REL message with the location "network beyond interworking point". SIP Parameter values: ISUP Parameter values: REL: cause value: CV_ISUP (PIXIT) location: "network beyond interworking point" Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM CANCEL REL 200 OK CANCEL RLC 487 Request Terminated ACK ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 88 TP110003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.6 TSS reference: SIP-ISUP/Basic call/ Receipt of the BYE message SIP selection criteria: ISUP selection criteria: Test purpose: BYE without Reason header received, sending of REL Ensure that the SUT on receipt of SIP BYE without Reason header, the SUT shall send an ISUP REL to the ISUP side. Ensure that the coding of the ISUP Cause Value is # 16 with the location "network beyond interworking point" if no reason header is contained in the SIP message. SIP Parameter values: ISUP Parameter values: REL: cause value: #16 Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM 200 OK INVITE ANM ACK BYE REL 200 OK BYE RLC TP110004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.6 TSS reference: SIP-ISUP/Basic call/ Receipt of the CANCEL message SIP selection criteria: ISUP selection criteria: Test purpose: CANCEL without Reason header received, sending of REL Ensure that the SUT on receipt of SIP CANCEL without reason header, the SUT shall send an ISUP REL to the ISUP side. Ensure that the coding of the ISUP Cause Value is # 31 with the location "network beyond interworking point" if no reason header is contained in the SIP message. SIP Parameter values: ISUP Parameter values: REL: cause value: CV_ISUP (PIXIT) location: LOC_ISUP (PIXIT) Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM CANCEL REL 200 OK CANCEL RLC 487 Request Terminated ACK ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 89 6.2.1.11 Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented TP111001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.9 TSS reference: SIP-ISUP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria: ISUP selection criteria: Test purpose: RSC received in the confirmed state, a BYE is sent Ensure that the SUT, when the communication is in the confirmed state, on receipt of a RSC message sends: β’ a BYE message if the SUT has already received an ACK for the 200 OK INVITE message which had it sent. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM 200 OK INVITE ANM ACK Conversation BYE RSC 200 OK BYE RLC TP111002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.9 TSS reference: SIP-ISUP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria: ISUP selection criteria: Test purpose: GRS received in the confirmed state, a BYE is sent Ensure that the SUT, when the communication is in the confirmed state, on receipt of a GRS message sends: β’ a BYE message if the SUT has already received an ACK for the 200 OK INVITE message which had it sent. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM 200 OK INVITE ANM ACK Conversation BYE GRS 200 OK BYE GRA ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 90 TP111003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.9 TSS reference: SIP-ISUP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria: ISUP selection criteria: Test purpose: CGB "Hardware failure oriented" received in the confirmed state, a BYE is sent Ensure that the SUT, when the communication is in the confirmed state, on receipt of a CGB message, with the Circuit Group Supervision Message Type Indicator coded as "hardware failure oriented", sends: β’ a BYE message if the SUT has already received an ACK for the 200 OK INVITE message which had it sent. SIP Parameter values: ISUP Parameter values: Circuit Group Supervision Message Type Indicator "hardware failure oriented" Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM 200 OK INVITE ANM ACK Conversation BYE CGB 200 OK BYE CGBA TP111004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.9 TSS reference: SIP-ISUP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria: ISUP selection criteria: Test purpose: RSC received after 200 OK INVITE was sent and ACK is not received Ensure that the SUT, when an ANM was received, on receipt of a RSC message sends 200 OK INVITE if the SUT has not yet received an ACK for the 200 OK INVITE. β’ the SUT shall wait until it receives the ACK for the 200 OK INVITE before sending the BYE. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM 200 OK INVITE ANM RSC ACK RLC BYE 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 91 TP111005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.9 TSS reference: SIP-ISUP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria: ISUP selection criteria: Test purpose: GRS received after 200 OK INVITE was sent and ACK is not received Ensure that the SUT, when an ANM was received, on receipt of a GRS message sends 200 OK INVITE if the SUT has not yet received an ACK for the 200 OK INVITE. β’ The SUT shall wait until it receives the ACK for the 200 OK INVITE before sending the BYE. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM 200 OK INVITE ANM GRS ACK GRA BYE 200 OK BYE TP111006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.9 TSS reference: SIP-ISUP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria: ISUP selection criteria: Test purpose: CGB "Hardware failure oriented" received after 200 OK INVITE was sent and ACK is not received Ensure that the SUT, when an ANM was received, on receipt of a CGB message, with the Circuit Group Supervision Message Type Indicator coded as "hardware failure oriented", sends 200 OK INVITE if the SUT has not yet received an ACK for the 200 OK INVITE. β’ The SUT shall wait until it receives the ACK for the 200 OK INVITE before sending the BYE. SIP Parameter values: ISUP Parameter values: Circuit Group Supervision Message Type Indicator "hardware failure oriented" Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM 200 OK INVITE ANM CGB ACK CGBA BYE 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 92 TP111007 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.9 TSS reference: SIP-ISUP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria: ISUP selection criteria: Test purpose: RSC in the early dialogue received, a 500 is sent Ensure that the SUT, when at least one backward ISUP/BICC message relating to the call has already been received on receipt of a RSC message sends: β’ a 480 Temporarily on the SIP side. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM RSC 480 Temporarily Unavailable RLC ACK TP111008 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.9 TSS reference: SIP-ISUP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria: ISUP selection criteria: Test purpose: GRS in the early dialogue received, a 500 is sent Ensure that the SUT, when at least one backward ISUP/BICC message relating to the call has already been received on receipt of a GRS message sends: β’ a 480 Temporarily Unavailable on the SIP side. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM GRS 480 Temporarily Unavailable GRA ACK ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 93 TP111009 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.9 TSS reference: SIP-ISUP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria: ISUP selection criteria: Test purpose: CGB "Hardware failure oriented" in the early dialogue received, a 500 is sent Ensure that the SUT, when at least one backward ISUP message relating to the call has already been received on receipt of a CGB message, with the Circuit Group Supervision Message Type Indicator coded as "hardware failure oriented", sends β’ a 480 Temporarily Unavailable on the SIP side. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE IAM 180 Ringing ACM CGB 480 Temporarily Unavailable CGBA ACK TP111010 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.9 TSS reference: SIP-ISUP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria: ISUP selection criteria: Test purpose: GRS for more than one connections received, a BYE is sent for each connection Ensure that the SUT after receiving more than one INVITE sending an IAM message for each call association on receipt of a GRS message in the confirmed state, were the Range and Status Parameter value is bigger than "1": β’ the SUT shall send a BYE requests for each call association. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE(1) IAM 180 Ringing ACM 200 OK INVITE ANM ACK Conversation INVITE(2) IAM 180 Ringing ACM 200 OK INVITE ANM ACK Conversation GRS BYE (1) GRA 200 OK BYE BYE (2) 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 94 TP111011 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.8.9 TSS reference: SIP-ISUP/Basic call/ Receipt of Reset circuit message (RSC), Circuit group reset message (GRS) or Circuit group blocking message (CGB) with the indication hardware failure oriented SIP selection criteria: ISUP selection criteria: Test purpose: CGB "Hardware failure oriented" for more than one connections received, a BYE is sent for each connection Ensure that the SUT after receiving more than one INVITE sending an IAM message for each call association on receipt of a CGB message in the confirmed state, with the Circuit Group Supervision Message Type Indicator coded as "hardware failure oriented" and were the Range and Status Parameter value is bigger than "1": β’ the SUT shall send a BYE requests for each call association. SIP Parameter values: ISUP Parameter values: Comments: SIP SUT ISUP INVITE(1) IAM 180 Ringing ACM 200 OK INVITE ANM ACK Conversation INVITE(2) IAM 180 Ringing ACM 200 OK INVITE ANM ACK Conversation CGB BYE (1) CGBA 200 OK BYE BYE (2) 200 OK BYE
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1.12 Receipt of the Suspend message (SUS) network initiated
|
Void.
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.1.13 Receipt of the Resume message (RES) network initiated
|
Void. ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 95
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.2 Interworking from ISUP to SIP
| |
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.2.1 Sending of the INVITE message
|
TP301001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.4 TSS reference: ISUP-SIP /Basic call/Sending of the INVITE message SIP selection criteria: ISUP selection criteria: Test purpose: IAM contains the complete Called party number and the sending complete indication, sending of INVITE Ensure that the SUT in idle state, on receipt of an IAM message containing the complete called party number and the sending complete indication: β’ Sends the INVITE message. SIP Parameter values: ISUP Parameter values: IAM; Called party number: with sending complete indication Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.4 TSS reference: ISUP-SIP /Basic call/Sending of the INVITE message SIP selection criteria: ISUP selection criteria: Test purpose: IAM contains the maximum number of digits used in the national numbering plan, sending of INVITE Ensure that the SUT in idle state, on receipt of an IAM message containing the maximum number of digits used in the national numbering plan: β’ sends the INVITE message. SIP Parameter values: ISUP Parameter values: IAM; Called party number: complete number Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 96 TP301003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.4 TSS reference: ISUP-SIP /Basic call/Sending of the INVITE message SIP selection criteria: ISUP selection criteria: Test purpose: IAM contains a sufficient number of digits to route the call to the called party, sending of INVITE Ensure that the SUT in idle state, on receipt of an IAM message containing the complete called party number where the end of address signalling is determined by analysis of the called party number to indicate that a sufficient number of digits has been received to route the call to the called party: β’ sends the INVITE message. SIP Parameter values: ISUP Parameter values: IAM; Called party number: complete number Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.4 TSS reference: ISUP-SIP /Basic call/Sending of the INVITE message SIP selection criteria: ISUP selection criteria: Test purpose: IAM received, after timer Ti/w1 is expired , sending of INVITE Ensure that the SUT in idle state, on receipt of an IAM message with the minimum number of digits required for routing the call have been received, by observing the timer Ti/w1 which has expired β’ sends the INVITE message. SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM TI/W1 expiry INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 97 TP301005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.2 TSS reference: ISUP-SIP/Basic call/Sending of the INVITE message SIP selection criteria: ISUP selection criteria: PICS 1/3 Test purpose: IAM received continuity check indicator is set to "continuity check not required", the INVITE is sent immediately Ensure that the SUT in idle state, on receipt of an IAM message with the complete called party number containing the Continuity Check indicator in the Nature of Connection Indicators parameter is set to indicate "continuity check not required": β’ sends a INVITE message. SIP Parameter values: ISUP Parameter values: IAM: Nature of Connection Indicators parameter is set to indicate "continuity check not required" Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.2 TSS reference: ISUP-SIP/Basic call/Sending of the INVITE message SIP selection criteria: NOT PICS 4/11 ISUP selection criteria: PICS 4/5 AND PICS 1/3 Test purpose: IAM received continuity check indicator is set to " continuity check required on this circuit", the INVITE is sent after COT "successful" is received Ensure that the SUT in idle state, on receipt of an IAM message with the complete called party number containing the Continuity Check indicator in the Nature of Connection Indicators parameter which is set to "continuity check required on this circuit": β’ Sends the INVITE after the receipt of the Continuity message with the Continuity Indicators parameter "continuity check successful". SIP Parameter values: ISUP Parameter values: IAM: Nature of Connection Indicators parameter which is set to "continuity check required on this circuit" COT: Continuity Indicators parameter "continuity check successful" Comments: ISUP/BICC SUT SIP IAM COT(successful) INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 98 TP301007 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.2 TSS reference: ISUP-SIP/Basic call/Sending of the INVITE message SIP selection criteria: PICS 4/5 AND NOT PICS 4/11 ISUP selection criteria: PICS 1/3 Test purpose: IAM received continuity check indicator is set to "continuity check performed on previous circuit", the INVITE is sent after COT "successful" is received Ensure that the SUT in idle state, on receipt of an IAM message with the complete called party number containing the Continuity Check indicator in the Nature of Connection Indicators parameter which is set to "continuity check performed on previous circuit": β’ Sends the INVITE after the receipt of the Continuity message with the Continuity Indicators parameter "continuity check successful". SIP Parameter values: ISUP Parameter values: IAM Nature of Connection Indicators parameter which is set to "continuity check performed on previous circuit" COT: Continuity Indicators parameter "continuity check successful" Comments: ISUP/BICC SUT SIP IAM COT(successful) INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 99 TP301008 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.2, 7.2.3.2.3 TSS reference: ISUP-SIP/Basic call/Sending of the INVITE message SIP selection criteria: PICS 4/5 AND PICS 4/11 ISUP selection criteria: PICS 1/3 AND PICS 4/2 Test purpose: IAM continuity check required received, precondition request in the INVITE Ensure that the SUT in idle state, on receipt of an IAM message where the Continuity Check indicator in the Nature of Connection Indicators parameter in the IAM is set to indicate "continuity check required on this circuit": β’ sends an INVITE message with precondition using the SDP offer in the INVITE. The SDP offer or answer carrying the confirmation of a precondition being met is sent when the Continuity message with the Continuity Indicators parameter set to "continuity check successful" was received and the requested preconditions are met in the SIP network. SIP Parameter values: INVITE: Require: precondition SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv ISUP Parameter values: IAM: Nature of Connection Indicators parameter which is set to "continuity check required on this circuit" COT: Continuity Indicators parameter "continuity check successful" Comments: ISUP/BICC SUT SIP IAM INVITE 183 Session Progress PRACK 200 OK PRACK COT UPDATE 200 OK UPDATE ACM 180 Ringing PRACK 200 OK PRACK Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 100 TP301009 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.2, 7.2.3.2.3 TSS reference: ISUP-SIP/Basic call/Sending of the INVITE message SIP selection criteria: PICS 4/5 AND PICS 4/11 ISUP selection criteria: PICS 1/3 AND PICS 4/2 Test purpose: IAM continuity check performed on a previous circuit received, precondition request in the INVITE Ensure that the SUT in idle state, on receipt of an IAM message where the Continuity Check indicator in the Nature of Connection Indicators parameter in the IAM is set to indicate "continuity check performed on previous circuit": β’ sends an INVITE message with precondition using the SDP offer in the INVITE. The SDP offer or answer carrying the confirmation of a precondition being met is sent when the Continuity message with the Continuity Indicators parameter set to "continuity check successful" was received and the requested preconditions are met in the SIP network. SIP Parameter values: INVITE: Require: precondition SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv ISUP Parameter values: IAM Nature of Connection Indicators parameter which is set to "continuity check performed on previous circuit" COT: Continuity Indicators parameter "continuity check successful" Comments: ISUP/BICC SUT SIP IAM INVITE 183 Session Progress PRACK 200 OK PRACK COT UPDATE 200 OK UPDATE ACM 180 Ringing PRACK 200 OK PRACK Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 101 TP301010 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.3 TSS reference: ISUP-SIP/Basic call/Sending of the INVITE message SIP selection criteria: PICS 4/20 ISUP selection criteria: Test purpose: Support of Information Request message (INR) Ensure that if no calling party number is received in the incoming IAM message, the O-MGCF sends an INR message to request the calling party number and not sends the INVITE request until receiving an INF message with calling party number. If no calling party number is received in the INF message, O-MGCF may reject or continue the call based on local configuration. SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INR INF INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 102 TP301011 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1a TSS reference: ISUP-SIP/Basic call/Sending of the INVITE message SIP selection criteria: ISUP selection criteria: Test purpose: Sending of INVITE without determining the end of address signalling Ensure that if the O-MGCF sends an INVITE request before the end of address signalling is determined, the O-MGCF shall: - start timer Ti/w2; and - be prepared to process SAM - be prepared to handle incoming SIP 404 or 484 error. On receipt of a SAM from the ISUP side, the O-MGCF shall: stop timer Ti/w3 (if it is running); send an INVITE request complying to the following: - The INVITE request shall include all digits received so far for this call in the Request-URI. restart Ti/w2. SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE 404/484 ACK SAM INVITE 404/484 ACK SAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 103 TP301012 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.2 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: Based on table 8 ISUP selection criteria: Test purpose: Mapping of TMR into the SDP in the sent INVITE Ensure that the SUT in the idle state on receipt of a IAM message, with the Transmission Medium Requirement (TMR) parameter set to TMR_VALUE: β’ sends an INVITE message containing the media description defined with the "a=" "b=" and "m=" lines set to a_b_m_LINE_VALUE. SIP Parameter values: INVITE: a_b_m_LINE_VALUE ISUP Parameter values: IAM: TMR: ISUP_TMR Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301013 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.2 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: Based on table 9 ISUP selection criteria: Test purpose: Mapping of USI into the SDP in the sent INVITE Ensure that the SUT in the idle state on receipt of an IAM message, with the user information parameter set to USI_VALUE: β’ sends an INVITE message, with the media description defined with the "a = " "b=" and "m=" lines set to a_b_m_LINE_VALUE. SIP Parameter values: INVITE: a_b_m_LINE_VALUE ISUP Parameter values: IAM: USI: ISUP_USI Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 104 P301014 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.2 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 2/8 ISUP selection criteria: Test purpose: SDP offer using the AMR codec Ensure that the SUT in the idle state on receipt of an IAM message indicating a speech call, with the user information parameter set to USI_VALUE: β’ sends an INVITE message, with the AMR codec. SIP Parameter values: Offer: m=audio RTP/AVP dynamic PT a = rtpmap dynamic PT AMR Answer: m=audio RTP/AVP dynamic PT a = rtpmap dynamic PT AMR ISUP Parameter values: IAM: USI= USI_VALUE (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301015 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.2 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: NOT PICS 2/8 ISUP selection criteria: Test purpose: No AMR codec in the SDP, when no equipment implements the AMR codec Ensure that the SUT in the Idle state on receipt of an IAM message indicating a speech call, with the user information parameter set to USI_VALUE and the IMS network serves that no user equipment implements the AMR codec, then the AMR codec shall be excluded from the SDP offer. SIP Parameter values: INVITE: SDP no AMR codec ISUP Parameter values: IAM: USI= USI_VALUE (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 105 Table 8 Values for test purposes TP301012 ISUP SDP - a_b_m_LINE_VALUE TMR parameter m= line b= line a= line TMR codes <media> <transport> <fmt-list> <modifier>: <bandwidt h-value> rtpmap:<dynamic-PT> <encoding name>/<clock rate>[/encoding parameters> VA_01 "speech" Audio RTP/AVP 0 (and possibly 8) AS:64 rtpmap:0 PCMU/8000 (and possibly rtpmap:8 PCMA/8000) VA_02 "speech" Audio RTP/AVP Dynamic PT (and possibly a second Dynamic PT) AS:64 rtpmap:<dynamic-PT> PCMU/8000 (and possibly rtpmap:<dynamic-PT> PCMA/8000) VA_03 "speech" Audio RTP/AVP 8 AS:64 rtpmap:8 PCMA/8000 VA_04 "speech" Audio RTP/AVP Dynamic PT AS:64 rtpmap:<dynamic-PT> PCMA/8000 VA_05 "3,1 KHz audio" Audio RTP/AVP 0 and/or 8 AS:64 rtpmap:0 PCMU/8000 and/or rtpmap:8 PCMA/8000 VA_06 "3,1 KHz audio" Audio RTP/AVP 0 (and possibly 8) AS:64 rtpmap:0 PCMU/8000 (and possibly rtpmap:8 PCMA/8000) VA_07 "3,1 KHz audio" Audio RTP/AVP 8 AS:64 rtpmap:8 PCMA/8000 VA_08 "64 kbit/s unrestricted" Audio RTP/AVP 9 AS:64 rtpmap:9 G722/8000 VA_9 "64 kbit/s unrestricted" Audio RTP/AVP Dynamic PT AS:64 rtpmap:<dynamic-PT> CLEARMODE/8000 ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 106 Table 9 Values for test purposes TP301012, TP301013 VA ISUP SDP - a_b_m_LINE_VALUE USI parameter HLC IE in ATP m= line b= line a= line TMR Information Transport Capability User Information Layer 1 Protocol Indicator High Layer Characteristi cs Identification <media> <transport > <fmt-list> <modifier>: <bandwidth -value> rtpmap:<dynamic-PT> <encoding name>/<clock rate>[/encoding parameters> VA_01 "speech" "Speech" "G.711 ΞΌ-law" Ignore audio RTP/AVP 0 (and possibly 8) (NOTE 1) AS:64 rtpmap:0 PCMU/8000 (and possibly rtpmap:8 PCMA/8000) (see note 1) VA_02 "speech" "Speech" "G.711 ΞΌ-law" Ignore audio RTP/AVP Dynamic PT (and possibly a second Dynamic PT) (NOTE 1) AS:64 rtpmap:<dynamic-PT> PCMU/8000 (and possibly rtpmap:<dynamic- PT> PCMA/8000) (see note 1) VA_03 "speech" "Speech" "G.711 A-law" Ignore audio RTP/AVP 8 AS:64 rtpmap:8 PCMA/8000 VA_04 "speech" "Speech" "G.711 A-law" Ignore audio RTP/AVP Dynamic PT AS:64 rtpmap:<dynamic-PT> PCMA/8000 VA_05 "3,1 kHz audio" USI Absent Ignore audio RTP/AVP 8 AS:64 rtpmap:8 PCMA/8000 VA_06 "3,1 kHz audio" "3,1 kHz audio" "G.711 ΞΌ-law" (NOTE 3) audio RTP/AVP 0 (and possibly 8) (NOTE 1) AS:64 rtpmap:0 PCMU/8000 (and possibly rtpmap:8 PCMA/8000) (see note 1) VA_07 "3,1 kHz audio" "3,1 kHz audio" "G.711 A-law" (NOTE 3) audio RTP/AVP 8 AS:64 rtpmap:8 PCMA/8000 VA_08 "3,1 kHz audio" "3,1 kHz audio" "Facsimile Group 2/3" image udptl t38 AS:64 Based on ITU-T Recommendation T.38 [31]. VA_09 "3,1 kHz audio" "3,1 kHz audio" "Facsimile Group 2/3" image tcptl t38 AS:64 Based on ITU-T Recommendation T.38 [31] VA_10 "64 kbit/s unrestricted" "Unrestricted digital inf. W/tone/ann." N/A Ignore audio RTP/AVP 9 AS:64 rtpmap:9 G722/8000 VA_11 "64 kbit/s unrestricted" "Unrestricted digital information" N/A Ignore audio RTP/AVP Dynamic PT AS:64 rtpmap:<dynamic-PT> CLEARMODE/8000 (see note 2) NOTE 1: Both PCMA and PCMU could be required. NOTE 2: CLEARMODE is specified in RFC 4040 [19]. NOTE 3: HLC is normally absent in this case. It is possible for HLC to be present with the value "Telephony", although 6.3.1/Q.939 indicates that this would normally be accompanied by a value of "Speech" for the Information Transfer Capability element. ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 107 TP301016 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.2 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 2/8 ISUP selection criteria: Test purpose: The SUT defines the RS and RR bandwidth modifiers when AMR codec is used Ensure that the if the O-MGCF determines that a speech call is incoming, the O-MGCF shall include the AMR codec and provides SDP RR and RS bandwidth modifiers specified in RFC 3556 [17] to disable RTCP. SIP Parameter values: INVITE: SDP b=RS:<bandwidth-value> b=RR:<bandwidth-value> ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301017 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.1 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of Called party number into the To header user=phone is included Ensure that the SUT is mapping the Called Party address information contained in the Called Party Number parameter of the IAM: β’ to the addr-spec component of the To header field which shall include the "user=phone" URI parameter if the To header field contains a sip: URI. SIP Parameter values: INVITE: To: sip: β¦.; user=phone ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 108 TP301018 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.1 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of Called party number into the To header received digits in the addr-spc component Ensure that the SUT is mapping the Called Party address information contained in the Called Party Number parameter of the IAM and the and the followed SAM: β’ to the addr-spec component of the To header field. SIP Parameter values: INVITE: To: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301019 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.1 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of Called party number into the To header as a SIP URI Ensure that the SUT is mapping in the Called Party Number parameter contained in the Called Party address information of the IAM and followed SAM: β’ to the addr-spec component of the To header field which shall include the "user=phone" URI parameter if the To header field contains a sip: URI. SIP Parameter values: INVITE: To: sip: β¦.; user=phone ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE 404/484 ACK SAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 109 TP301020 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.4 TSS reference: ISUP-SIP/Basic call/ Sending of the Initial Address message (IAM)/ SIP selection criteria: ISUP selection criteria: PICS 4/5 Test purpose: Mapping of HOP counter into the Max-Forwards header Ensure that if the Hop Counter procedure is supported in the CS network, the O-MGCF shall use the Hop Counter parameter to derive the Max-Forwards SIP header. Due to the different default values (that are based on network demands/provisions) of the SIP Max- Forwards header and the Hop Counter, an adaptation mechanism shall be used to adopt the Hop Counter to the Max Forwards at the O-MGCF. Max-Forwards for a given message should be monotone decreasing with each successive visit to a SIP entity, regardless of intervening interworking, and similarly for Hop Counter. SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE Table 10: Hop counter-Max forwards Hop Counter = X Max-Forwards = Y = Integer part of (X * Factor) NOTE: The Mapping of value X to Y should be done with the used (implemented) adaptation mechanism. ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 110 TP301021 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.1 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: ISUP selection criteria: PICS 1/6 Test purpose: Mapping of a "international number" into the To header and Request URI Ensure that the called party number parameter of the IAM message is used to derive Request URI and To header of the INVITE Request. If the Request URI is a tel URI with "user=phone" it shall contain an International public telecommunication number prefixed by a "+" sign (e.g. tel:+4911231234567). If the Request URI is a sip URI with "user=phone" it shall contain an International public telecommunication number prefixed by a "+" sign and a host portion (e.g. sip:+4911231234567@host). Ensure that the SUT is mapping the Called Party address information contained in the Called Party Number parameter, Nature of address = "International number" of the IAM: β’ to the format of the To header field and Request URI inserting "+" before the Address signal. SIP Parameter values: INVITE: To: β¦, Request URI ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 111 TP301022 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.1 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: ISUP selection criteria: NOT PICS 1/6 Test purpose: Mapping of Called party number "national (significant) number" into the To header and Request URI user=phone is included Ensure that the called party number parameter of the IAM message is used to derive Request URI of the INVITE Request. The Request URI is a tel URI with "user=phone" and shall contain an International public telecommunication number prefixed by a "+" sign (e.g. tel:+4911231234567). If the Request URI is a sip URI with "user=phone" it shall contain an International public telecommunication number prefixed by a "+" sign and a host portion (e.g. sip:+4911231234567@host). Ensure that the SUT is mapping the Called Party address information contained in the Called Party Number parameter, Nature of address = "National (significant) number" of the IAM: β’ to the format of the To header field and Request URI inserting "+" CC before the Address signal; β’ the format of the To header field is "+CC+NDC+SN". SIP Parameter values: INVITE: To: β¦ ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 112 TP301023 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.7 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of USI parameter into PSTN XML BearerCapability Ensure that the SUT in Idle state, on receipt of an IAM message User Service Information (USI) set to USI_VALUE: β’ sends the INVITE message with the PSTN XML Bearer Capability (BC) set to USI_VALUE. SIP Parameter values: INVITE; PSTN XML BearerCapability (BC): USI_VALUE (PIXIT) ISUP Parameter values: IAM; USI: USI_VALUE (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301024 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.7 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of USI and USI prime parameter into PSTN XML BearerCapability Ensure that the SUT in Idle state, on receipt of an IAM message USI set to "speech" and the USI Prime set to "unrestricted digital information with tones and announcements": β’ sends the INVITE message with the first PSTN XML BearerCapability set to "speech" (the USI value) and the second PSTN XML BearerCapability set to "unrestricted digital information with tones and announcements" (the USI prime value). SIP Parameter values: INVITE; first PSTN XML Bearer Capability: speech second PSTN XML Bearer Capability: unrestricted digital information with tones and announcements ISUP Parameter values: IAM; USI: speech USI Prime: unrestricted digital information with tones and announcement Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 113 P301025 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.8 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of FCI "ISUP not used all the way" into PSTN XML ProgressIndicator #1 Ensure that the SUT in Idle state, on receipt of an IAM message containing the ISUP indicator set to "ISUP not used all the way": β’ sends INVITE message with the PSTN XML ProgressIndicator set to "call is not end-to-end ISDN: further call progress information is available in-band (#1)". SIP Parameter values: INVITE; PSTN XML ProgressIndicator: call is not end-to-end ISDN: further call progress information is available in-band (#1) ISUP Parameter values: IAM; ISUP indicator: ISUP not used all the way Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301026 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.8 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of FCI "Originating access non ISDN" into PSTN XML ProgressIndicator #3 Ensure that the SUT in Idle state, on receipt of an IAM message containing the ISUP indicator set to "ISUP used all the way" and the ISDN access indicator set to "originating access non-ISDN": β’ sends the INVITE message with the PSTN XML ProgressIndicator se tot "Originating access is non ISDN (#3)". SIP Parameter values: INVITE: PSTN XML ProgressIndicator: Originating access is non ISDN (#3) ISUP Parameter values: IAM; ISUP indicator: ISUP used all the way ISDN access indicator: originating access non-ISDN Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 114 TP301027 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.8 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of FCI "ISUP used all the way" and "Originating access non ISDN" into PSTN XML ProgressIndicator #3 Ensure that the SUT in Idle state, on receipt of an IAM message containing the ISUP indicator set to "ISUP used all the way" and the ISDN access indicator set to "originating access non-ISDN": β’ sends the INVITE message with the PSTN XML ProgressIndicatorPSTN XML ProgressIndicator set to "Originating access is non ISDN (#3)". SIP Parameter values: INVITE; PSTN XML ProgressIndicatorPSTN XML ProgressIndicator: Originating access id non ISDN (#3) ISUP Parameter values: IAM; ISUP indicator: ISUP used all the way ISDN access indicator: originating access non-ISDN Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301028 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.8 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of FCI "ISUP used all the way" and "Originating access ISDN" into PSTN XML ProgressIndicator #6 Ensure that the SUT in Idle state, on receipt of an IAM message containing the ISUP indicator set to "ISUP used all the way" and the ISDN access indicator set to "originating access ISDN": β’ sends the INVITE message with the PSTN XML ProgressIndicator set to "originating access ISDN" (#6). SIP Parameter values: INVITE; PSTN XML ProgressIndicator: "originating access ISDN" (#6) ISUP Parameter values: IAM; ISUP indicator: ISUP used all the way ISDN access indicator: originating access ISDN Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 115 TP301029 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.8 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of FCI "ISUP used all the way" and "Originating access ISDN" and ATP contains a Progress Indicator into PSTN XML ProgressIndicator #6 Ensure that the SUT in Idle state, on receipt of an IAM message containing the ISUP indicator set to "ISUP used all the way" and the ISDN access indicator set to "originating access ISDN" and an Access Transport Parameter (ATP) containing progress indicator set to PI_VALUE: β’ sends the INVITE message with the PSTN XML ProgressIndicator set to "originating access ISDN" (#6) and PI_VALUE. SIP Parameter values: INVITE; PSTN XML ProgressIndicator: "originating access ISDN" (#6) and PSTN XML ProgressIndicator: PI_VALUE (PIXIT) ISUP Parameter values: IAM; ISUP indicator: ISUP used all the way ISDN access indicator: originating access ISDN ATP progress indicator: PI_VALUE (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301030 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.8 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of ATP contains a LLC into a PSTN XML LLC in the sent INVITE Ensure that the SUT in Idle state, on receipt of an IAM message containing the Access Transport Parameter (ATP) containing the Low Layer Compatibility (LLC) set to LLC_VALUE: β’ sends the INVITE message with the PSTN XML LowLayerCompatibility set to LLC_VALUE. SIP Parameter values: the PSTN XML LowLayerCompatibility: LLC_VALUE (PIXIT) ISUP Parameter values: IAM; ATP LLC: LLC_VALUE (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 116 TP301031 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.8 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of ATP contains a HLC into a PSTN XML HLC in the sent INVITE Ensure that the SUT in Idle state, on receipt of an IAM message containing the Access Transport Parameter (ATP) containing the High Layer Compatibility (HLC) set to HLC_VALUE: β’ sends the INVITE message with the PSTN XML HighLayerCompatibility set to HLC_VALUE. SIP Parameter values: INVITE: PSTN XML HighLayerCompatibility: HLC_VALUE (PIXIT) ISUP Parameter values: IAM; ATP HLC: HLC_VALUE (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301032 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.8 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of User Teleservice Information parameter into a PSTN XML HLC in the sent INVITE Ensure that the SUT in Idle state, on receipt of an IAM message containing the User Teleservice containing the High Layer Compatibility (HLC) set to HLC_VALUE: β’ sends the INVITE message with the PSTN XML HighLayerCompatibility set to HLC_VALUE. SIP Parameter values: INVITE: PSTN XML HighLayerCompatibility: HLC_VALUE (PIXIT) ISUP Parameter values: IAM; User Teleservice Information: HLC_VALUE (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 117 TP301033 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.8 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: Mapping of two HLC parameter contained in an ATP parameter into two PSTN XML HighLayerCompatibility elements Ensure that the SUT in Idle state, on receipt of an IAM message containing the Access Transport Parameter (ATP) containing two High Layer Compatibility (HLC) set to respectively HLC_VALUE1 and HLC_VALUE2: β’ sends the INVITE message with two PSTN XML HighLayerCompatibility in the same order HLC_VALUE1 and HLC_VALUE2. SIP Parameter values: INVITE; first PSTN XML HighLayerCompatibility: HLC_VALUE1 (PIXIT) second PSTN XML HighLayerCompatibility: HLC_VALUE2 (PIXIT) ISUP Parameter values: IAM; ATP first HLC: HLC_VALUE1 (PIXIT) ATP second HLC: HLC_VALUE2 (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP301034 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.2.8 TSS reference: ISUP-SIP/Basic call/ Sending of the INVITE message SIP selection criteria: ISUP selection criteria: Test purpose: Mapping of calling party category into cpc parameter in the P-Aserted-Identity Ensure that the SUT map the calling party category ISUP_CPC into the cpc SIP_CPC parameter in the P-Asserted-Identity and Accept-Contact header parameter "language" SIP_LANG. SIP Parameter values: INVITE; P-Asserted-Identity, Accept-Contact ISUP Parameter values: IAM; Calling party category Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 118 Values for test purposes TP301034 ISUP_CPC SIP Parameters received calling party's category SIP_CPC in P-Asserted-Identity SIP_LANG Accept- Contact 'language' operator, language French operator French operator, language English operator English operator, language German operator German operator, language Russian operator Russian operator, language Spanish operator Spanish ordinary calling subscriber ordinary test call test payphone payphone mobile terminal located in the home PLMN cellular mobile terminal located in a visited PLMN cellular roaming IEPS call marking for preferential call set up ieps
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.2.2 Receipt of the SAM message after INVITE has been send
|
TP302001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1.4 TSS reference: ISUP-SIP/Basic call/Receipt of SAM after INVITE has been sent SIP selection criteria: PICS 3/1 ISUP selection criteria: PICS 3/5 AND NOT PICS 3/8 Test purpose: Overlap procedure not supported, SAM is ignored Ensure if the SUT is supporting en bloc addressing towards the SIP network, subsequent SAMs received after the SUT has sent the INVITE are ignored. SIP Parameter values: ISUP Parameter values: SAM; subsequent number (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE SAM ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 119 TP302002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.1a and 7.2.3.2.1.4 TSS reference: ISUP-SIP/Basic call/Receipt of SAM after invite has been sent SIP selection criteria: PICS 3/2 ISUP selection criteria: PICS 3/8 Test purpose: Overlap procedure supported by determining the end of address signalling. sending complete indication received Ensure that the SUT in Idle state, on receipt of an IAM message containing the Continuity Check indicator in the Nature of Connection Indicators parameter which is set to indicate "continuity check not required" on receipt of a SAM containing the complete called party number and the sending complete indication and the SUT On receipt of a SAM from the ISUP the SUT shall: Stop timer TOIW3 (if it is running). TOIW2 shall be restarted and the SUT shall invoke the following procedures: a) The Request-URI and the To header field of the new INVITE shall contain all digits received so far for this call. b) A new INVITE with the same Call-ID and From header (including tag) as the previous INVITE is sent. c) The new INVITE shall contain a new SDP offer. The O-MGCF may re-use any resources that have already been reserved for this call. This re-use of existing reserved resources shall be reflected within the precondition attributes for the SDP parameters in question. d) All other contents of the new INVITE are interworked from the parameters of the original IAM. SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE 404/484 ACK SAM INVITE 404/484 ACK SAM INVITE 404/484 ACK SAM(F) INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 120 TP302003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.1a and 7.2.3.2.1.4 TSS reference: ISUP-SIP/Basic call/Receipt of SAM after invite has been sent SIP selection criteria: PICS 3/2 ISUP selection criteria: PICS 3/8 Test purpose: Overlap procedure supported by determining the end of address signalling. Maximum number of digits used in the national numbering plan are reached Ensure that the SUT in Idle state, on receipt of an IAM message containing Continuity Check indicator in the Nature of Connection Indicators parameter which is set to indicate "continuity check not required" on receipt of a SAM and the maximum number of digits used in the national numbering plan are reached, the SUT sends an INVITE message containing all digits received in the IAM and the SAM(s). Stop timer TOIW3 (if it is running). TOIW2 shall be restarted and the SUT shall invoke the following procedures: a) The Request-URI and the To header field of the new INVITE shall contain all digits received so far for this call. b) A new INVITE with the same Call-ID and From header (including tag) as the previous INVITE is sent. c) The new INVITE shall contain a new SDP offer. The O-MGCF may re-use any resources that have already been reserved for this call. This re-use of existing reserved resources shall be reflected within the precondition attributes for the SDP parameters in question. d) All other contents of the new INVITE are interworked from the parameters of the original IAM. SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE 404/484 ACK SAM INVITE 404/484 ACK SAM INVITE 404/484 ACK SAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 121 TP302004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.1a and 7.2.3.2.1.4 TSS reference: ISUP-SIP/Basic call/Receipt of SAM after invite has been sent SIP selection criteria: PICS 3/2 ISUP selection criteria: PICS 3/8 Test purpose: Overlap procedure supported by determining the end of address signalling. Sufficient number of digits has been received to route the call received Ensure that the SUT in Idle state, on receipt of an IAM message containing Continuity Check indicator in the Nature of Connection Indicators parameter which is set to indicate "continuity check not required" on receipt of a SAM and the sufficient number of digits has been received to route the call to the called party, the SUT sends an INVITE message containing all digits received in the IAM and the SAM(s). Stop timer TOIW3 (if it is running). TOIW2 shall be restarted and the SUT shall invoke the following procedures: a) The Request-URI and the To header field of the new INVITE shall contain all digits received so far for this call. b) A new INVITE with the same Call-ID and From header (including tag) as the previous INVITE is sent. c) The new INVITE shall contain a new SDP offer. The O-MGCF may re-use any resources that have already been reserved for this call. This re-use of existing reserved resources shall be reflected within the precondition attributes for the SDP parameters in question. d) All other contents of the new INVITE are interworked from the parameters of the original IAM. SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE 404/484 ACK SAM INVITE 404/484 ACK SAM INVITE 404/484 ACK SAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 122 TP302004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.4 TSS reference: ISUP-SIP/Basic call/Receipt of SAM after invite has been sent SIP selection criteria: NOT PICS 3/2 ISUP selection criteria: PICS 3/8 Test purpose: Overlap procedure supported by determining the end of address signalling. Ti/w1 is expired Ensure that the SUT in Idle state, on receipt of an IAM message containing Continuity Check indicator in the Nature of Connection Indicators parameter which is set to indicate "continuity check not required" on receipt of a SAM start Ti/w1. After Ti/w1 is expired, the SUT: β’ sends an INVITE message containing all digits received in the IAM and the SAM. SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM Start Ti/w1 SAM Start Ti/w1 SAM Start Ti/w1 SAM Start Ti/w1 Ti/w1 expired INVITE ACM(no indication) CPG(alerting) 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 123 TP302005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.1a TSS reference: ISUP-SIP/Basic call/Receipt of SAM after invite has been sent SIP selection criteria: PICS 3/2 ISUP selection criteria: PICS 3/9 Test purpose: Overlap procedure supported without determining the end of address signalling Ensure that the SUT in Idle state, on receipt of an IAM message containing the Continuity Check indicator in the Nature of Connection Indicators parameter which is set to indicate "continuity check not required": β’ Sends an INVITE message start Ti/w1 and Ti/w2. β’ On receipt of a 404/484 the SUT shall send a ACK, stop Ti/w2 and start Ti/w3: β’ On receipt of a SAM from the ISUP the SUT shall send an INVITE request: a) The Request-URI and the To header field of the new INVITE shall contain all digits received so far for this call. b) All other contents of the new INVITE are interworked from the parameters of the original IAM. c) Start Ti/w1 and Ti/w2 and stop Ti/w3 (if it is running). SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE 404/484 ACK SAM INVITE 404/484 ACK SAM INVITE 404/484 ACK SAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 124
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.2.3 Sending of the ACM message
|
TP303001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.1.4, 7.2.3.2.4 and 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 3/1 ISUP selection criteria: PICS 4/9 AND NOT PICS 4/17 Test purpose: ACM is sent after the determination of address complete indication in the SUT Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number and the sending complete indication: β’ Sends the INVITE message to called user and starts Ti/w2. β’ When Ti/w2 is expired, sends the ACM message with the CPS indicator set to "no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "interworking encountered (1)", the ISUP indicator set to "ISUP not used all the way", the ISDN access indicator set to "terminating access non-ISDN". SIP Parameter values: ISUP Parameter values: IAM; Called party number: complete number ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: interworking encountered (1) ISUP indicator: ISUP not used all the way ISDN access indicator: "terminating access non-ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE Ti/w2 expired ACM(no indication) CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 125 TP303002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.1.4, 7.2.3.2.4 and 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 2/3 AND PICS 3/1 ISUP selection criteria: PICS 4/9 AND PICS 4/17 Test purpose: 64 kBit/s unrestricted call, ACM is sent after the determination of address complete indication in the SUT Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number and the sending complete indication: β’ Sends the INVITE message to called user and starts Ti/w2. β’ When Ti/w2 is expired, sends the ACM message with the CPS indicator set to "no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "no interworking encountered (0)", the ISUP indicator set to "ISUP used all the way", the ISDN access indicator set to "terminating access ISDN". SIP Parameter values: INVITE: SDP a=rtpmap:<dynamic-PT> CLEARMODE/8000 ISUP Parameter values: IAM; Called party number: complete number, TMR: "64 kbit/s unrestricted" ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE Ti/w2 expired ACM(no indication) CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 126 TP303003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.1.4, 7.2.3.2.4 and 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/ Sending of the ACM message SIP selection criteria: PICS 3/1 ISUP selection criteria: PICS 4/9 AND NOT PICS 4/17 Test purpose: ACM is sent after the maximum number of digits used in the national numbering plan received Ensure that the SUT in Idle state, on receipt of an IAM message containing the maximum number of digits used in the national numbering plan: β’ Sends the INVITE message to the called user and starts Ti/w2. β’ When Ti/w2 is expired, sends the ACM message with the CPS indicator set to "no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "interworking encountered (1)", the ISUP indicator set to "ISUP not used all the way", the ISDN access indicator set to "terminating access non-ISDN". SIP Parameter values: ISUP Parameter values: IAM; Called party number: complete number ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: interworking encountered (1) ISUP indicator: ISUP not used all the way ISDN access indicator: "terminating access non-ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE Ti/w2 expired ACM(no indication) CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 127 TP303004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.1.4, 7.2.3.2.4 and 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/ Sending of the ACM message SIP selection criteria: PICS 2/3 AND PICS 3/1 ISUP selection criteria: PICS 4/9 AND PICS 4/17 Test purpose: 64 kBit/s call, ACM is sent after the maximum number of digits used in the national numbering plan received Ensure that the SUT in Idle state, on receipt of an IAM message containing the maximum number of digits used in the national numbering plan: β’ Sends the INVITE message to the called user and starts Ti/w2. β’ When Ti/w2 is expired, sends the ACM message with the CPS indicator set to "no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "no interworking encountered", the ISUP indicator set to "ISUP used all the way", the ISDN access indicator set to "terminating access ISDN". SIP Parameter values: INVITE: SDP a=rtpmap:<dynamic-PT> CLEARMODE/8000 ISUP Parameter values: IAM; Called party number: complete number ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE Ti/w2 expired ACM(no indication) CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 128 TP303005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.1.4, 7.2.3.2.4 and 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 3/1 ISUP selection criteria: PICS 4/9 AND NOT PICS 4/17 Test purpose: ACM is sent after sufficient number of digits has been received to route the call to the called party. Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number where the end of address signalling is determined by analysis of the called party number to indicate that a sufficient number of digits has been received to route the call to the called party: β’ Sends the INVITE message to the called user and starts Ti/w2. β’ When Ti/w2 is expired, sends the ACM message with the CPS indicator set to "no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "interworking encountered (1)", the ISUP indicator set to "ISUP not used all the way", the ISDN access indicator set to "terminating access non-ISDN". SIP Parameter values: ISUP Parameter values: IAM; Called party number: complete number ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: interworking encountered (1) ISUP indicator: ISUP not used all the way ISDN access indicator: "terminating access non-ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE Ti/w2 expired ACM(no indication) CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 129 TP303006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.1.4, 7.2.3.2.4 and 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 2/3 AND PICS 3/1 ISUP selection criteria: PICS 4/9 AND PICS 4/17 Test purpose: 64 kBit/s unrestricted call, ACM is sent after sufficient number of digits has been received to route the call to the called party Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number where the end of address signalling is determined by analysis of the called party number to indicate that a sufficient number of digits has been received to route the call to the called party: β’ Sends the INVITE message to called user and starts Ti/w2. β’ When Ti/w2 is expired, sends the ACM message with the CPS indicator set to "no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "no interworking encountered (0)", the ISUP indicator set to "ISUP used all the way", the ISDN access indicator set to "terminating access ISDN". SIP Parameter values: INVITE: SDP a=rtpmap:<dynamic-PT> CLEARMODE/8000 ISUP Parameter values: IAM; Called party number: complete number, TMR: "64 kbit/s unrestricted" ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE Ti/w2 expired ACM CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 130 TP303007 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.1.4, 7.2.3.2.4 and 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 3/1 ISUP selection criteria: NOT PICS 4/17 Test purpose: ACM is sent determined by the expiration timer TI/W1 Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number where the end of address signalling is determined by the expiration timer TI/W1 after the receipt of the latest address message: β’ sends the INVITE message to the called user. β’ Sends the ACM message with the CPS indicator set to "no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "interworking encountered (1)", the ISUP indicator set to "ISUP not used all the way", the ISDN access indicator set to "terminating access non-ISDN". SIP Parameter values: ISUP Parameter values: IAM; Called party number: complete number ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: interworking encountered (1) ISUP indicator: ISUP not used all the way ISDN access indicator: "terminating access non-ISDN" Comments: ISUP/BICC SUT SIP IAM Start TI/W1 TI/W1 expiry ACM(no indication) INVITE CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 131 TP303008 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.1.4, 7.2.3.2.4 and 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 2/3 AND PICS 3/1 ISUP selection criteria: PICS 4/17 Test purpose: 64 kBit/s unrestricted call, ACM is sent after determined by the expiration timer TI/W1 Ensure that the SUT in Idle state, on receipt of an IAM message, TMR=64 kBit/s unrestricted containing the complete called party number where the end of address signalling is determined by the expiration timer TI/W1 after the receipt of the latest address message: β’ Sends the INVITE message to called user. β’ Sends the ACM message with the CPS indicator set to "no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "no interworking encountered (0)", the ISUP indicator set to "ISUP used all the way", the ISDN access indicator set to "terminating access ISDN". SIP Parameter values: INVITE: SDP a=rtpmap:<dynamic-PT> CLEARMODE/8000 ISUP Parameter values: IAM; Called party number: complete number, TMR: "64 kbit/s unrestricted" ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM Start TI/W1 TI/W1 expiry ACM(no indication) INVITE CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 132 TP303009 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.5 and 7.2.3.2.1.4 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 3/2 ISUP selection criteria: NOT PICS 4/17 Test purpose: ACM is sent determined by the expiration timer TI/W2 Ensure that the SUT if overlap addressing is to be used toward the SIP network, on receipt of an IAM message containing the minimum number of digits required for routing the call has been received (start timer TI/W2 and invoke the appropriate outgoing SIP signalling procedure): β’ Sends an INVITE message to the called user and after the expiration of TI/W2. β’ Sends the ACM message with the CPS indicator set to "no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "interworking encountered (1)", the ISUP indicator set to "ISUP not used all the way", the ISDN access indicator set to "terminating access non-ISDN". SIP Parameter values: ISUP Parameter values: IAM; Called party number: complete number ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: interworking encountered (1) ISUP indicator: ISUP not used all the way ISDN access indicator: "terminating access non-ISDN" Comments: ISUP/BICC SUT SIP IAM Start TI/W1 SAM Start TI/W1 SAM Start TI/W2 INVITE TI/W2 expiry ACM(no indication) CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 133 TP303010 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clauses 7.2.3.2.1.4 and 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 2/3 AND PICS 3/2 ISUP selection criteria: PICS 4/17 Test purpose: 64 kBit/s unrestricted call, ACM is sent after determined by the expiration timer TI/W2 Ensure that the SUT if overlap addressing is to be used toward the SIP network, on receipt of an IAM message, TMR=64 kBit/s unrestricted containing the minimum number of digits required for routing the call has been received (start timer TOIW2 and invoke the appropriate outgoing SIP signalling procedure): β’ Sends an INVITE message to the called user and after the expiration of TOIW2. β’ Sends the ACM message with the CPS indicator set to "no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "no interworking encountered (0)", the ISUP indicator set to "ISUP used all the way", the ISDN access indicator set to "terminating access ISDN". SIP Parameter values: INVITE: SDP a=rtpmap:<dynamic-PT> CLEARMODE/8000 ISUP Parameter values: IAM; Called party number: complete number, TMR: "64 kbit/s unrestricted" ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM Start TI/W1 SAM Start TI/W1 SAM Start TI/W2 INVITE T/IW2 expiry ACM(no indication) CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 134 TP303011 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 3/1 ISUP selection criteria: NOT PICS 4/9 AND NOT PICS 4/17 Test purpose: ACM is sent after 180 Ringing was received Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number, on receipt of a 180 Ringing message: β’ Sends the ACM message with the CPS indicator set to "subscriber free (01)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "interworking encountered (1)", the ISUP indicator set to "ISUP not used all the way", the ISDN access indicator set to "terminating access non-ISDN". SIP Parameter values: ISUP Parameter values: IAM; Called party number: complete number ACM, CPS indicator: subscriber free (01) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: interworking encountered (1) ISUP indicator: ISUP not used all the way ISDN access indicator: "terminating access non-ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 135 TP303012 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 2/3 AND PICS 3/1 ISUP selection criteria: NOT PICS 4/9 AND PICS 4/17 Test purpose: 64 kBit/s unrestricted call, ACM is sent after 180 Ringing was received Ensure that the SUT in Idle state, on receipt of an IAM message, TMR=64 kBit/s unrestricted containing the complete called party number on receipt of a 180 Ringing message: β’ Sends the ACM message with the CPS indicator set to "subscriber free (01)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "no interworking encountered (0)", the ISUP indicator set to "ISUP used all the way", the ISDN access indicator set to "terminating access ISDN". SIP Parameter values: INVITE: SDP a=rtpmap:<dynamic-PT> CLEARMODE/8000 ISUP Parameter values: IAM; Called party number: complete number, TMR: "64 kbit/s unrestricted" ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 136 TP303013 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.4 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 4/15 ISUP selection criteria: NOT PICS 4/9 AND NOT PICS 4/17 Test purpose: The SUT supports the P-Early-Media header Ensure that the SUT, on receipt of an IAM message containing the complete called party number, where the O-MGCF is supporting the P-Early-Media header as a network option, on the reception of the first 180 Ringing that includes a P-Early-Media header authorizing early media, sends the ACM message with the CPS indicator set to "subscriber free (01)", Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", OBCI "in -band information" set to: yes. SIP Parameter values: 180 Ringing: P-Early-Media header ISUP Parameter values: IAM; Called party number: complete number ACM; CPS indicator: subscriber free (01), OBCI: in -band information: yes Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 137 TP303014 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/ Sending of the ACM message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: 180 received, mapping of PSTN XML ProgressIndicator #7 into the ACM BCI Ensure that the SUT, if an ACM has not been already sent, on receipt the 180 Ringing message, with the PSTN XML body with ProgressIndicator # 7 (Terminating user ISDN): β’ sends the ACM message with the Called Party's Status (CPS) indicator set to " subscriber free (01)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "no interworking encountered (0)", the ISUP indicator set to "ISUP used all the way" and the ISDN access indicator set to "ISDN" and if included the access delivery information is set to "Set-up message generated". SIP Parameter values: 180 Ringing; PSTN XML body with ProgressIndicator # 7 (Terminating user ISDN) ISUP Parameter values: ACM, CPS indicator: subscriber free (01) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: terminating access is ISDN access delivery information: Set-up message generated (IF PRESENT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 138 TP303015 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/ Sending of the ACM message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: 180 received, mapping of PSTN XML ProgressIndicator into Progress Indicator contained in the ATP in the sent ACM Ensure that the SUT, if an ACM has not been already sent, on receipt the 180 Ringing message, with the PSTN XML body with Progress indicator # 7 (Terminating user ISDN) and a PSTN XML ProgressIndicator set to PI_VALUE. The ATP does not contain the ProgressIndicator #7: β’ sends the ACM message with the CPS indicator set to " subscriber free (01)" and the Access Transport Parameter (ATP) containing the progress indicator PI_VALUE. SIP Parameter values: 180 Ringing; PSTN XML ProgressIndicator: PI_VALUE (PIXIT) ISUP Parameter values: ACM, CPS indicator: subscriber free (01) ATP progress indicator: PI_VALUE (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE Values and additional selection criteria for test purposes TP303015 VA_01 PI_VALUE = Call is not end-to-end ISDN (#1) VA_02 PI_VALUE = Destination address is non-ISDN (#2) ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 139 TP303016 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 3/1 AND NOT PICS 4/15 ISUP selection criteria: NOT PICS 4/9 AND NOT PICS 4/17 Test purpose: P-Early-Media header not supported, 183 is not interworked sending complete indication received Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number and the sending complete indication, on receipt of a 183 Session Progress: β’ Sends the INVITE message to called user. β’ No ISUP message is sent backward. SIP Parameter values: ISUP Parameter values: IAM; Called party number: complete number Comments: ISUP/BICC SUT SIP IAM INVITE 183 Session Progress ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE TP303017 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 4/15 ISUP selection criteria: Test purpose: P-Early-Media header supported, 183 is interworked, an ACM no indication is sent Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number, where the O-MGCF is supporting the P-Early-Media header if the 183 Session Progress contains a P-Early_Media header authorizing early media: β’ sends the ACM message with the CPS indicator set to " no indication (00)", the Called party's category indicator set to "no indication(00)", OBCI "in -band information" set to: yes. SIP Parameter values: 183 Session Progress that includes a P-Early-Media header authorizing early media ISUP Parameter values: IAM; Called party number: complete number ACM; CPS indicator: no indication (00), OBCI: in -band information: yes Comments: ISUP/BICC SUT SIP IAM INVITE ACM(no indication) 183 Session Progress CPG(Alerting) 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 140 TP303018 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 9.2.3.3.12 TSS reference: ISUP-SIP /Basic call/ Sending of the ACM message SIP selection criteria: PICS 3/1 ISUP selection criteria: NOT PICS 4/15 Test purpose: P-Early-Media header not supported, 183 is not interworked maximum number of digits used in the national numbering plan received Ensure that the SUT in Idle state, on receipt of an IAM message containing the maximum number of digits used in the national numbering plan on receipt of a 183 Session Progress: β’ No ISUP message is sent backward. SIP Parameter values: ISUP Parameter values: IAM; Called party number: complete number Comments: ISUP/BICC SUT SIP IAM INVITE 183 Session Progress ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE TP303019 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 9.2.3.3.12 TSS reference: ISUP-SIP /Basic call/ Sending of the ACM message SIP selection criteria: PICS 3/1 ISUP selection criteria: NOT PICS 4/15 Test purpose: P-Early-Media header not supported, 183 is not interworked sufficient number of digits has been received to route the call to the called party received Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number where the end of address signalling is determined by analysis of the called party number to indicate that a sufficient number of digits has been received to route the call to the called party on receipt of a 183 Session Progress: β’ No BICC/ISUP message is sent backward. SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE 183 Session Progress ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 141 TP303020 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 9.2.3.3.12 TSS reference: ISUP-SIP /Basic call/ Sending of the ACM message SIP selection criteria: PICS 3/1 NOT PICS 4/15 ISUP selection criteria: NOT PICS 4/9 Test purpose: 183 received after TI/W1 expired, P-Early-Media header not supported 183 is not interworked Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number where the end of address signalling is determined by the expiration timer TI/W1 after the receipt of the latest address message on receipt of a 183 Session Progress: β’ No ISUP message is sent backward. SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM TI/W1 expiry ACM(no indication) INVITE 183 Session Progress CPG(alerting) 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 142 TP303021 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 4/15 AND PICS 4/18 ISUP selection criteria: Test purpose: 183 received, mapping of PSTN XML ProgressIndicator #7 into the ACM BCI Ensure that the SUT, on receipt of the 183 Session Progress message with the PSTN XML ProgressIndicator # 7 (Terminating user ISDN): β’ sends the ACM message with the CPS indicator set to " no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "no interworking encountered (0)", the ISUP indicator set to "ISUP used all the way" and the ISDN access indicator set to "ISDN" and if included the access delivery information is set to "Set-up message generated". SIP Parameter values: 183 Session Progress; PSTN XML ProgressIndicator # 7 (Terminating user ISDN) ISUP Parameter values: ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: ISDN access delivery information: Set-up message generated (IF PRESENT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 183 Session Progress CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 143 TP303022 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 4/15 AND PICS 4/18 ISUP selection criteria: Test purpose: 183 received, mapping of PSTN XML ProgressIndicator into Progress Indicator contained in the ATP in the sent ACM Ensure that the SUT, on receipt of the 183 Session Progress message with the PSTN XML body with Progress indicator # 7 (Terminating user ISDN) containing the PSTN XML ProgressIndicator set to PI_VALUE. The XML ProgressIndicator #7 is not interworked: β’ sends the ACM message with the CPS indicator set to " no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "no interworking encountered (0)", the ISUP indicator set to "ISUP used all the way", the ISDN access indicator set to "ISDN", the Access Transport Parameter (ATP) containing the progress indicator set to PI_VALUE and if included the access delivery information is set to "Set-up message generated". SIP Parameter values: 183 Session Progress; PSTN XML ProgressIndicator: PI_VALUE ISUP Parameter values: ACM: CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: ISDN ATP progress indicator: PI_VALUE access delivery information: Set-up message generated (IF PRESENT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 183 Session Progress CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE Values for test purposes TP303022 VA_01 PI_VALUE: Call is not end-to-end ISDN: further call progress information is available in- band (#1) VA_02 PI_VALUE: Destination address is non-ISDN (#2) ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 144 TP303023 β’ SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: NOT PICS 4/15 AND NOT PICS 4/18 ISUP selection criteria: Test purpose: 183 received, mapping of PSTN XML ProgressIndicator into Progress Indicator contained in the ATP and mapping of PSTN XML ProgressIndicator #7 BCI is not supported Ensure that the SUT, on receipt of the 183 Session Progress message with the PSTN XML body with Progress indicator # 7 (Terminating user ISDN) and containing the PSTN XML ProgressIndicator set to PI_VALUE: β’ does not send the ACM message. SIP Parameter values: 183 Session Progress; PSTN XML ProgressIndicator: PI_VALUE ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE 183 Session Progress ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE Values for test purposes TP303023 VA_01 PI_VALUE: originating address is non-ISDN (#3) VA_02 PI_VALUE: Call has returned to ISDN (#4) ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 145 TP303024 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.3.3.2.3 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 3/1 AND PICS 4/5 AND PICS 4/11 ISUP selection criteria: PICS 4/2 AND PICS 4/9 AND NOT PICS 4/17 Test purpose: Preconditions requested, ACM is sent after the determination of address complete indication in the SUT Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number, the sending complete indication, and the continuity check is required on this circuit (ISUP) or COT is expected (BICC): β’ Sends the INVITE message to called user and starts Ti/w2. β’ The SUT shall withhold sending ACM until a successful continuity indication has been received. β’ Sends the ACM message with the CPS indicator set to "no indication (00)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "interworking encountered (1)", the ISUP indicator set to "ISUP not used all the way", the ISDN access indicator set to "terminating access non-ISDN". SIP Parameter values: ISUP Parameter values: IAM; Called party number: complete number ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: interworking encountered (1) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access non-ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE 183 Session Progress PRACK 200 OK PRACK COT UPDATE 200 OK UPDATE ACM Ti/w2 expired CPG(Alerting) 180 Ringing PRACK 200 OK PRACK Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 146 TP303025 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.3.3.2.3 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 3/1 AND PICS 4/5 AND PICS 4/11 ISUP selection criteria: PICS 4/2 AND PICS 4/9 AND PICS 4/17 Test purpose: 64 kBit/s, Preconditions requested, ACM is sent after the determination of address complete indication in the SUT Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number, the sending complete indication and the continuity check is required on this circuit (ISUP) or COT is expected (BICC): β’ Sends the INVITE message to called user and starts Ti/w2. β’ The SUT shall withhold sending ACM until a successful continuity indication has been received. β’ Sends the ACM message with the CPS indicator set to "subscriber free (01)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "no interworking encountered (0)", the ISUP indicator set to "ISUP used all the way", the ISDN access indicator set to "terminating access ISDN". SIP Parameter values: INVITE: SDP a=rtpmap:<dynamic-PT> CLEARMODE/8000 ISUP Parameter values: IAM; Called party number: complete number, TMR: "64 kbit/s unrestricted" ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE 183 Session Progress PRACK 200 OK PRACK COT UPDATE 200 OK UPDATE ACM(no indication) Ti/w2 expired CPG 180 Ringing PRACK 200 OK PRACK ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 147 TP303026 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.3.3.2.3 TSS reference: ISUP-SIP /Basic call/Sending of the INVITE message SIP selection criteria: PICS 3/2 AND PICS 4/5 AND PICS 4/11 ISUP selection criteria: PICS 4/2 AND NOT PICS 4/17 Test purpose: Preconditions requested, ACM is sent after expiration of timer TI/W2 Ensure that the SUT if overlap addressing is to be used toward the SIP network, on receipt of an IAM message containing the minimum number of digits required for routing the call has been received, start timer TI/W2 and invoke the appropriate outgoing SIP signalling procedure and the continuity check is required on this circuit (ISUP): β’ The SUT shall withhold sending ACM until a successful continuity indication has been received. β’ Sends the ACM message with the CPS indicator set to "subscriber free (01)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "interworking encountered (1)", the ISUP indicator set to "ISUP not used all the way", the ISDN access indicator set to "terminating access non ISDN". SIP Parameter values: INVITE: SDP a=rtpmap:<dynamic-PT> CLEARMODE/8000 ISUP Parameter values: IAM; Called party number: complete number ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: interworking encountered (1) ISUP indicator: ISUP not used all the way ISDN access indicator: "terminating access non ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE 183 Session Progress PRACK 200 OK PRACK COT UPDATE 200 OK UPDATE TI/W2 expiry ACM(no indication) CPG(Alerting) 180 Ringing PRACK 200 OK PRACK Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 148 TP303027 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.3.3.2.3 TSS reference: ISUP-SIP /Basic call/Sending of the INVITE message SIP selection criteria: PICS 2/3 AND PICS 3/2 AND PICS 4/5 AND PICS 4/11 ISUP selection criteria: PICS 4/2 AND PICS 4/17 Test purpose: 64 kBit/s call, Preconditions requested, ACM is sent after expiration of timer TI/W2 Ensure that the SUT if overlap addressing is to be used toward the SIP network, on receipt of an IAM message containing the minimum number of digits required for routing the call has been received, start timer TI/W2 and invoke the appropriate outgoing SIP signalling procedure and the continuity check is required on this circuit (ISUP): β’ The SUT shall withhold sending ACM until a successful continuity indication has been received. β’ Sends the ACM message with the CPS indicator set to "subscriber free (01)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "no interworking encountered (0)", the ISUP indicator set to "ISUP used all the way", the ISDN access indicator set to "terminating access ISDN". SIP Parameter values: INVITE: SDP a=rtpmap:<dynamic-PT> CLEARMODE/8000 ISUP Parameter values: IAM; Called party number: complete number, TMR: "64 kbit/s unrestricted" ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE 183 Session Progress PRACK 200 OK PRACK COT UPDATE 200 OK UPDATE TI/W2 expiry ACM CPG 180 Ringing PRACK 200 OK PRACK Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 149 TP303028 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.3.3.2.3 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 4/5 AND PICS 4/11 ISUP selection criteria: PICS 4/2 AND NOT PICS 4/9 AND NOT PICS 4/17 Test purpose: 180 received after preconditions met, an ACM is sent Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number, the continuity check is required on this circuit (ISUP) indication receipt of a 180 Ringing message: β’ Sends the ACM message with the CPS indicator set to "subscriber free (01)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "interworking encountered (1)", the ISUP indicator set to "ISUP not used all the way", the ISDN access indicator set to "terminating access non-ISDN" . SIP Parameter values: ISUP Parameter values: IAM; Called party number: complete number ACM, CPS indicator: "subscriber free (01)" Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: interworking encountered (1) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access non-ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE 183 Session Progress PRACK 200 OK PRACK COT UPDATE 200 OK UPDATE ACM 180 Ringing PRACK 200 OK PRACK Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 150 TP303029 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.3.3.2.3 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 2/3 AND PICS 4/5 AND PICS 4/11 ISUP selection criteria: PICS 4/2 AND NOT PICS 4/9 AND PICS 4/17 Test purpose: 64 kBit/s call, 180 received after preconditions met, an ACM is sent Ensure that the SUT in Idle state, on receipt of an IAM message containing the complete called party number, the continuity check is required on this circuit (ISUP) or COT is expected (BICC) indication on receipt of a 180 Ringing message: β’ Sends the ACM message with the CPS indicator set to "subscriber free (01)", the Called party's category indicator set to "no indication(00)" or "ordinary subscriber (01)" or "payphone (10)", the interworking indicator set to "no interworking encountered (0)", the ISUP indicator set to "ISUP used all the way", the ISDN access indicator set to "terminating access ISDN". SIP Parameter values: INVITE: SDP a=rtpmap:<dynamic-PT> CLEARMODE/8000 ISUP Parameter values: IAM; Called party number: complete number, TMR: "64 kbit/s unrestricted" ACM, CPS indicator: no indication (00) Called party's category indicator: no indication(00) or ordinary subscriber (01) or payphone (10) interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE 183 Session Progress PRACK 200 OK PRACK COT UPDATE 200 OK UPDATE ACM 180 Ringing PRACK 200 OK PRACK Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 151 TP303030 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 2/3 AND PICS 4/18 AND PICS 4/19 ISUP selection criteria: Test purpose: Mapping of PSTN XML BearerCapability element contained in the 180 into the TMU parameter sent in the ACM Ensure on receipt of a 180 Ringing contains PSTN XML ProgressIndicator #7 and PSTN XML BearerCapability BC_VALUE, an ACM is sent containing the TMU Parameter BC_VALUE. The BCI is set to: ISUP indicator: ISUP is used all the way ISDN access indicator: ISDN Interworking indicator: Interworking not encountered SIP Parameter values: INVITE; PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 180 Ringing PSTN XML BC: BC_VALUE and XML PI #7 ISUP Parameter values: IAM; USI: Speech/audio3Kbit/s, G.711 A-law [37] USI prime: Unrestr. Digital info T/A, G.711 A-law [36] TMR: 64 kbit/s preferred TMR prime: Speech/audio3Kbit/s ACM: ISUP indicator: ISUP is used all the way ISDN access indicator: ISDN Interworking indicator: Interworking not enountered TMU: TMU_VALUE Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 152 TP303031 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.5 TSS reference: ISUP-SIP /Basic call/Sending of the ACM message SIP selection criteria: PICS 2/3 AND PICS 4/18 AND PICS 4/19 ISUP selection criteria: Test purpose: Mapping of PSTN XML PearerCapability element contained in the 183 into the TMU parameter sent in the ACM Ensure on receipt of a 183 Session Progress contains PSTN XML ProgressIndicator #7 and PSTN XML BearerCapability BC_VALUE, an ACM is sent containing the TMU Parameter BC_VALUE. The BCI is set to: ISUP indicator: ISUP is used all the way ISDN access indicator: ISDN Interworking indicator: Interworking not enountered SIP Parameter values: INVITE; PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 183 Session Progress PSTN XML BC: BC_VALUE and XML PI #7 ISUP Parameter values: IAM; USI: Speech/audio3Kbit/s, G.711 A-law USI prime: Unrestr. Digital info T/A, G.711 A-law TMR: 64 kbit/s preferred TMR prime: Speech/audio3Kbit/s ACM: ISUP indicator: ISUP is used all the way ISDN access indicator: ISDN Interworking indicator: Interworking not enountered TMU: TMU_VALUE Comments: ISUP/BICC SUT SIP IAM INVITE ACM(no indication) 183 Session Progress ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE Values and selection criteria for test purpose TP303030 and TP303031 Test purposes ACM Parameter values 18x Provisional response values: INVITE parameter value VA_01 TMU_VALUE: speech PSTN XML: BC_VALUE: speech PSTN XML INVITE BC1: speech INVITE BC2: unrestricted digital information with tones and announcements VA_02 TMU_VALUE: 3,1 kHz PSTN XML: BC_VALUE: 3,1 kHz audio PSTN XML INVITE BC1: 3,1 kHz audio INVITE BC2: unrestricted digital information with tones and announcements ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 153
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.2.4 Sending of the CPG message
|
TP304001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.6 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 3/1 ISUP selection criteria: PICS 4/9 Test purpose: 180 received, a CPG is sent when an ACM was sent before Ensure that the SUT, having sent a ACM message with called party status "no indication" on receipt of a 180 Ringing message: β’ Sends the CPG message with the with the event indicator set to "Alerting". SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM INVITE Ti/w2 expired ACM(no indication) CPG(Alerting) 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE TP304002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.6 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 3/1 ISUP selection criteria: NOT PICS 4/15 Test purpose: ACM was sent after TI/W1 expiry, a 183 is not interworked Ensure that the SUT, having sent a ACM message with called party status "no indication" after TI/W1 expiry, on receipt of a 183 Session progress message: β’ ISUP message is sent backward. SIP Parameter values: ISUP Parameter values: Comments: ISUP/BICC SUT SIP IAM TI/W1 expiry ACM INVITE 183 Session Progress Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 154 TP304003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 3/1 AND PICS 4/18 AND PICS 4/19 ISUP selection criteria: Test purpose: ACM was sent after TI/W1 expiry, a CPG is sent when a 183 is received contains a PSTN XML ProgressIndicator #7: Ensure that the SUT, having sent the ACM message after the expiry of ToiW1, on receipt of 183 Session progress message, with PSTN XML ProgressIndicator "Terminating access ISDN"(#7) β’ sends the CPG message with the event indicator set to "progress". SIP Parameter values: 183 Session Progress ; PSTN XML ProgressIndicator "Terminating access ISDN"(#7) ISUP Parameter values: CPG; event indicator: progress BCI interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM TI/W1 expiry ACM INVITE CPG(Progress) 183 Session progress CPG(Alerting) 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 155 TP304004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 3/1 AND PICS 4/18 ISUP selection criteria: Test purpose: ACM was sent after, a 183 contains a PSTN XML ProgressIndicator #7 was received Ensure that the SUT, having sent the ACM message after the reception of the 183 Session progress message, with PSTN XML ProgressIndicator "Terminating access ISDN"(#7), on receipt of an 180 Ringing message, with PSTN XML body containing the progress descriptions "Terminating access ISDN"(#7): β’ sends the CPG message with the event indicator set to "Alerting". SIP Parameter values: 183 Session Progress: ProgressIndicator "Terminating access ISDN"(#7) 180 Ringing: ProgressIndicator "Terminating access ISDN"(#7) ISUP Parameter values: CPG; event indicator: Alerting BCI interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE ACM 183 Session progress CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 156 TP304005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 3/1 AND PICS 4/18 ISUP selection criteria: Test purpose: ACM was sent after TI/W1 expiry, after receipt of a 183 and 180 contains a PSTN XML ProgressIndicator #7 a CPG(Progress) and a CPG(Alerting) are sent Ensure that the SUT, having sent the ACM message after the expiry of Ti/W1, on receipt of a 183 Session progress message followed by an 180 Ringing message with PSTN XML body containing the progress descriptions "Terminating access ISDN"(#7): β’ sends two CPG messages respectively with the event indicator set to "Progress" and "Alerting". SIP Parameter values: 183 Session progress 180 Ringing ISUP Parameter values: CPG 1; event indicator: Progress CPG 2; event indicator: Alerting BCI: interworking indicator: no interworking encountered ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM TI/W1 expiry ACM(no indication) INVITE CPG(Progress) 183 Session progress CPG(Alerting) 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 157 TP304006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 3/1 AND PICS 4/18 ISUP selection criteria: Test purpose: ACM was sent after TI/W1 expiry, a 183 covering a PSTN XML ProgressIndicator #7 and #x received, a CPG is sent contains an ATP with PI #x Ensure that the SUT, having sent the ACM message after the expiry of Ti/W1, on receipt of 183 Session progress message, with PSTN XML body containing the progress descriptions "Terminating access ISDN"(#7) and PI_VALUE the ProgressIndicator #7 is not sent in the ATP: β’ sends the CPG message with the event indicator set to "progress" and the ATP progress indicator set to PI_VALUE . SIP Parameter values: 183 Session Progress ; PSTN XML ProgressIndicator "Terminating access ISDN"(#7) PI_VALUE ISUP Parameter values: CPG; event indicator: progress ATP progress indicator: PI_VALUE Comments: ISUP/BICC SUT SIP IAM TI/W1 expiry ACM(no indication) INVITE CPG(Progress) 183 Session progress CPG(Alerting) 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE Values and additional selection criteria for test purposes TP304006 VA_01 PI_VALUE = Call is not end-to-end ISDN (#1) VA_02 PI_VALUE = Destination address is non-ISDN (#2) ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 158 TP304007 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 3/1 AND PICS 4/18 ISUP selection criteria: Test purpose: ACM was sent after TI/W1 expiry, a 180 covering a PSTN XML ProgressIndicator #7 and #x received, a CPG is sent contains an ATP with PI #x Ensure that the SUT, having sent the ACM message, on receipt of an a 180 Ringing message with PSTN XML ProgressIndicator "Terminating access ISDN"(#7)" and " PI_VALUE ", β’ sends a CPG message with the event indicator set to "Alerting" and the ATP including the progress indicator set to " PI_VALUE". SIP Parameter values: 180 Ringing; PSTN XML ProgressIndicator: PI_VALUE ISUP Parameter values: CPG; Event indicator: Alerting ATP progress indicator: PI_VALUE Comments: ISUP/BICC SUT SIP IAM TOIW1 expiry ACM(no indication) INVITE CPG(Alerting) 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE Values and additional selection criteria for test purposes TP304007 VA_01 PI_VALUE = Call is not end-to-end ISDN (#1) VA_02 PI_VALUE = Destination address is non-ISDN (#2) ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 159 TP304008 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 2/3 AND PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: ACM was sent after TI/W1 expiry, a 180 covering a PSTN XML ProgressIndicator #7 and #x received, a CPG is sent contains an ATP with PI #x Ensure that the SUT having sent the ACM message, on receipt of a 183 Call Progress message containing the PSTN XML ProgressIndicator "Terminating access ISDN"(#7) and "Interworking has occurred and has resulted in a telecommunication service change (#5)", the PSTN XML BearerCapability set to BC_VALUE: β’ sends the CPG message with the event indicator set to "Progress", the ATP containing the BC set to BC_VALUE and the progress indicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)" and the TMU set to TMU_VALUE. SIP Parameter values: INVITE; PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 183 Call Progress; PSTN XML ProgressIndicator: Interworking has occurred and has resulted in a telecommunication service change (#5). PSTN XML BearerCapability: BC_VALUE ISUP Parameter values: IAM; USI: Speech/audio3Kbit/s, G.711 A-law USI prime: Unrestr. Digital info T/A, G.711 A-law TMR: 64 kbit/s preferred TMR prime: Speech/audio3Kbit/s CPG, event indicator: Progress ATP BC: BC_VALUE ATP progress indicator: Interworking has occurred and has resulted in a telecommunication service change (#5) TMU: TMU_VALUE Comments: ISUP/BICC SUT SIP IAM TOIW1 expiry ACM INVITE CPG 183 Session progress CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 160 TP304009 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3. TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 2/3 AND PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: ACM was sent after TI/W1 expiry, Fallback occurs in the 180 Ringing Ensure that the SUT in call having sent the ACM message, on receipt of an 180 Ringing message containing the PSTN XML BearerCapability set to BC_VALUE and the PSTN XML ProgressIndicator set to "Terminating access ISDN"(#7) and "Interworking has occurred and has resulted in a telecommunication service change (#5)": β’ sends the CPG message with the event indicator set to "Alerting", the ATP containing the BC set to BC_VALUE and the progress indicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)" and the TMU set to TMU_VALUE. SIP Parameter values: INVITE; PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 180 Ringing; PSTN XML ProgressIndicator: "Terminating access ISDN"(#7) and Interworking has occurred and has resulted in a telecommunication service change (#5) PSTN XML BearerCapability: BC_VALUE ISUP Parameter values: IAM; USI: Speech/audio3Kbit/s, G.711 A-law USI prime: Unrestr. Digital info T/A, G.711 A-law TMR: 64 kbit/s preferred TMR prime: Speech/audio3Kbit/s CPG; event indicator: Alerting ATP BC: BC_VALUE ATP progress indicator: Interworking has occurred and has resulted in a telecommunication service change (#5) TMU: TMU_VALUE Comments: ISUP/BICC SUT SIP IAM TOIW1 expiry ACM INVITE CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 161 TP304010 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4.1 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 2/3 AND PICS 4/18 ISUP selection criteria: PICS 4/19 Test purpose: ACM was sent after TI/W1 expiry, Fallback occurs in the 183 Session Progress Ensure that the SUT having sent the ACM message, on receipt of a 183 Session Progress message containing the BC SET to BC_VALUE and the PSTN XML ProgressIndicator set to "Terminating access ISDN"(#7), "Interworking has occurred and has resulted in a telecommunication service change (#5)" and "In-band information or appropriate pattern is now available (#8)": β’ sends the CPG message with the event indicator set to "In-band information or appropriate pattern is now available", the ATP containing the BC set to BC_VALUE and the progress indicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)" and the TMU set to TMU_VALUE. SIP Parameter values: INVITE; PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 183 Session Progress ; PSTN XML ProgressIndicator: Interworking has occurred and has resulted in a telecommunication service change (#5) ProgressIndicator: In-band information or appropriate pattern is now available (#8) PSTN XML BeaererCapability: BC_VALUE ISUP Parameter values: IAM; USI: Speech/audio3Kbit/s, G.711 A-law USI prime: Unrestr. Digital info T/A, G.711 A-law TMR: 64 kbit/s preferred TMR prime: Speech/audio3Kbit/s CPG 1; event indicator: In-band information or appropriate pattern is now available ATP BC: BC_VALUE ATP progress indicator: Interworking has occurred and has resulted in a telecommunication service change (#5) TMU: TMU_VALUE Comments: ISUP/BICC SUT SIP IAM TOIW1 expiry ACM INVITE CPG 1 183 Session progress CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE Values and additional selection criteria for test purposes TP304008 to TP304010 VA_01 TMU_VALUE: speech ISUP_VALUE: UDI/TA BC_VALUE: speech VA_02 TMU_VALUE: 3,1 kHz ISUP_VALUE: UDI/TA BC_VALUE: 3,1 kHz ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 162 TP304011 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4.1 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: ACM was sent after TI/W1 expiry, PSTN XML HLC received in a 183 mapping in the ATP contained in the CPG Ensure that the SUT, having sent the ACM message, on receipt of a 183 Session Progress message with PSTN XML ProgressIndicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)", "Terminating access ISDN"(#7) and with a PSTN XML HighLayerCompatibility set to HLC_VALUE the ProgressIndicator #7 is not contained in the ATP: β’ sends the CPG message with event indicator set to "Progress", the ATP including the HLC set to HLC_VALUE and the progress indicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)". SIP Parameter values: 183 Session Progress; PSTN XML ProgressIndicator: Interworking has occurred and has resulted in a telecommunication service change (#5) and "Terminating access ISDN"(#7) PSTN XML HighLayerCompatibility: HLC_VALUE2 (PIXIT) ISUP Parameter values: CPG 1, Event indicator: Progress ATP HLC: HLC_VALUE2 (PIXIT) ATP progress indicator: Interworking has occurred and has resulted in a telecommunication service change (#5) Comments: ISUP/BICC SUT SIP IAM TOIW1 expiry ACM INVITE CPG 1 183 Session progress CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 163 TP304012 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: ACM was sent after TI/W1 expiry, PSTN XML HLC received in a 180 mapping in the ATP contained in the CPG Ensure that the SUT, having sent the ACM message, on receipt of an 180 Ringing message with PSTN XML ProgressIndicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)" "Terminating access ISDN"(#7)and with a PSTN XML HighLayerCompatibility set to HLC_VALUE: β’ sends the CPG message with event indicator set to "Alert", the ATP including the HLC set to HLC_VALUE and the progress indicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)". SIP Parameter values: 180 Ringing; PSTN XML ProgressIndicator: Interworking has occurred and has resulted in a telecommunication service change (#5), "Terminating access ISDN"(#7) PSTN XML HighLayerCompatibility: HLC_VALUE2 (PIXIT) ISUP Parameter values: CPG, Event indicator: Alerting ATP HLC: HLC_VALUE2 (PIXIT) ATP progress indicator: Interworking has occurred and has resulted in a telecommunication service change (#5) Comments: ISUP/BICC SUT SIP IAM TOIW1 expiry ACM INVITE CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 164 TP304013 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: ISUP selection criteria: PICS 4/9 Test purpose: ACM sent after INVITE was sent, 183 received after 180 received. 183 contains a PSTN XML ProgressIndicator #7 mapped into BCI in the sent CPG Ensure that the SUT, having sent automatically the ACM message, on receipt of an 180 Ringing message followed by a 183 Session Progress message with PSTN XML ProgressIndicator "Terminating access ISDN"(#7): β’ sends two CPG message respectively with the event indicator set to "Alerting" and "Progress". SIP Parameter values: 180 Ringing; 183 Session Progress; ISUP Parameter values: CPG 1; event indicator: Alerting ISUP indicator: ISUP is used all the way ISDN access indicator: ISDN Interworking indicator: Interworking not enountered CPG 2; event indicator: Progress ISUP indicator: ISUP is used all the way ISDN access indicator: ISDN Interworking indicator: Interworking not enountered Comments: ISUP/BICC SUT SIP IAM ACM INVITE CPG 1 180 Ringing CPG 2 183 Session progress Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 165 TP304014 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: ISUP selection criteria: PICS 4/9 Test purpose: ACM sent after INVITE was sent, a 180 is received contains a PSTN XML ProgressIndicator #x mapped into an PI #x covered in an ATP in the sent CPG Ensure that the SUT, having sent automatically the ACM message, on receipt of an 180 Ringing message containing the PSTN XML ProgressIndicator set to PI_VALUE: β’ sends a CPG message with the event indicator set to "Alerting" and the ATP including the progress indicator set to PI_VALUE. SIP Parameter values: 180 Ringing; progress indicator: PI_VALUE ISUP Parameter values: CPG; Event indicator: Alerting ATP progress indicator: PI_VALUE Comments: SUT SIP IAM ACM INVITE CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE Values and additional selection criteria for test purposes TP304014 VA_01 PI_VALUE = Call is not end-to-end ISDN (#1) VA_02 PI_VALUE = Destination address is non-ISDN (#2) ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 166 TP304015 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.4 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: ISUP selection criteria: PICS 4/9 Test purpose: ACM sent after INVITE was sent, 180 received contains a PSTN XML ProgressIndicator #8 mapped into OBCI in the sent CPG Ensure that the SUT, having received an IAM with the USI field indicating USI_VALUE and having sent automatically the ACM message, on receipt of an 180 Ringing message with PI No.8 "In-band information or appropriate pattern is now available": β’ sends a CPG message with the event indicator set to "Alerting" and OBCI in-band information set to "yes". SIP Parameter values: 180 Ringing; PSTN XML ProgressIndicator "In-band information or appropriate pattern is now available" (#8) ISUP Parameter values: IAM: USI: USI_VALUE; CPG; Event indicator: Alerting OBCI in-band: yes Comments: ISUP/BICC SUT SIP IAM ACM INVITE CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 167 TP304016 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.6 TSS reference: ISUP-SIP /Basic call/ Sending of the CPG message SIP selection criteria: ISUP selection criteria: PICS 4/9 Test purpose: ACM sent after INVITE was sent, 180 received contains a P-Early-Media header mapped into the OBCI "inband info available" Ensure that the SUT, having received an IAM with the USI field indicating USI_VALUE and having sent automatically the ACM message, on receipt of an 180 Ringing message with P- Early-Media header authorizing early media": β’ sends a CPG message with the event indicator set to "Alerting" and OBCI in-band information set to "yes". SIP Parameter values: 180 Ringing; P-Early-Media header authorizing early media ISUP Parameter values: IAM: USI: USI_VALUE; CPG; Event indicator: Alerting OBCI in-band: yes Comments: ISUP/BICC SUT SIP IAM ACM INVITE CPG 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation BYE RLC 200 OK BYE Values and additional selection criteria for test purposes TP304016 VA_01 USI_VALUE = speech VA_02 USI_VALUE = 3,1 kHz ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 168
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.2.5 Sending of the ANM message
|
TP305001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.2.7a TSS reference: ISUP-SIP/Basic call/ Sending of the Answer Message (ANM)/ SIP selection criteria: ISUP selection criteria: Test purpose: An ANM is sent after a 200 OK INVITE is received Ensure that the SUT having sent the ACM message, on receipt of a 200 OK INVITE for this call, it shall stop timer TOIW2 (if running): β’ Send ANM as determined by BICC/ISUP procedures. β’ Stop any existing awaiting answer indication (e.g. ringing tone). SIP Parameter values: 200 OK INVITE; ISUP Parameter values: ANM; Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP305002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Answer Message (ANM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: An ANM is sent after a 200 OK INVITE is received. PSTN XML ProgressIndicator #x mapped into the ATP in the ANM Ensure that the SUT, having sent the ACM message, on receipt of a 200 OK message containing the PSTN XML ProgressIndicator set to PI_VALUE: β’ sends the ANM message with the ATP including the PSTN XML ProgressIndicator set to PI_VALUE. SIP Parameter values: 200 OK; PSTN XML ProgressIndicator: PI_VALUE (PIXIT) ISUP Parameter values: ANM; ATP Progress Indicator: PI_VALUE (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 169 TP305003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Answer Message (ANM)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: An ANM is sent after a 200 OK INVITE is received. PSTN XML LowLayerCompatibility mapped into the ATP in the ANM Ensure that the SUT, having sent the ACM message, on receipt of a 200 OK Message containing the PSTN XML LowLayerCompatibility set to LLC_VALUE: β’ sends the ANM message with the ATP including the LLC set to LLC_VALUE. SIP Parameter values: 200 OK; PSTN XML LowLayerCompatibility: LLC_VALUE (PIXIT) ISUP Parameter values: ANM; ATP LLC: PI_VALUE (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP305004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Answer Message (ANM)/ SIP selection criteria: PICS 4/18 AND PICS 2/3 ISUP selection criteria: PICS 4/19 Test purpose: An ANM is sent after a 200 OK INVITE is received. PSTN XML HighLayerCompatibility mapped into the ATP in the ANM Ensure that the SUT, having sent the ACM message, on receipt of a 200 OK Message containing the PSTN XML HighLayerCompatibility set to HLC_VALUE1: β’ sends the ANM message with the ATP including the HLC set to HLC_VALUE1. SIP Parameter values: 200 OK; PSTN XML HighLayerCompatibility: HLC_VALUE2 (PIXIT) ISUP Parameter values: IAM; ATP HLC1: HLC_VALUE1 (PIXIT) ATP HLC2: HLC_VALUE2 (PIXIT) ANM; ATP HLC: HLC_VALUE2 (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 170 TP305005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Answer Message (ANM)/ SIP selection criteria: PICS 4/18 AND PICS 2/3 ISUP selection criteria: PICS 4/19 Test purpose: An ANM is sent after a 200 OK INVITE is received. PSTN XML BearerCompatibility mapped into the ATP and TMU in the ANM Ensure that the SUT, having received the IAM message indicating BC fallback and having sent the ACM message, on receipt of a 200 OK Message with PSTN XML BeaererCapability set to BC_VALUE: β’ sends the ANM message with the ATP including the BC set to BC_VALUE and the TMU set to TMU_VALUE. SIP Parameter values: INVITE; PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 200 OK; PSTN XML BeaererCapability: BC_VALUE ISUP Parameter values: IAM; USI: Speech/audio3Kbit/s, G.711 A-law USI prime: Unrestr. Digital info T/A, CLEARMODE TMR: 64 kbit/s preferred TMR prime: Speech/audio3Kbit/s ANM; ATP BC: BC_VALUE TMU: TMU_VALUE Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE Values and additional selection criteria for test purposes TP TP305005 VA_01 TMU_VALUE: speech ISUP_VALUE: UDI/TA BC_VALUE: speech VA_02 TMU_VALUE: 3,1 kHz BC_VALUE: 3,1 kHz ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 171 TP305006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Answer Message (ANM)/ SIP selection criteria: PICS 4/18 AND PICS 2/3 ISUP selection criteria: PICS 4/19 Test purpose: An ANM is sent after a 200 OK INVITE is received. No PSTN XML BearerCompatibility contained in the 200. Sending of TMU in the ANM Ensure that the SUT, having received the IAM message indicating BC fallback and having sent the ACM message, on receipt of a 200 OK Message without PSTN XML BeaererCapability: β’ sends the ANM message with the ATP including the BC set to USI_VALUE and the TMU set to TMU_VALUE. SIP Parameter values: INVITE; PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 200 OK; no BC ISUP Parameter values: IAM; USI: Speech/audio3Kbit/s, G.711 A-law USI prime: Unrestr. Digital info T/A, CLEARMODE TMR: 64 kbit/s preferred TMR prime: Speech/audio3Kbit/s ANM; ATP BC: USI_VALUE TMU: TMR_VALUE Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE Values and additional selection criteria for test purposes TP305006 VA_01 TMU_VALUE: speech USI_VALUE: speech VA_02 TMU_VALUE: 3,1 kHz audio USI_VALUE: 3,1 kHz audio ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 172 TP305007 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Answer Message (ANM)/ SIP selection criteria: PICS 4/18 AND PICS 2/3 ISUP selection criteria: PICS 4/19 Test purpose: An ANM is sent after a 200 OK INVITE is received. PSTN XML HighLayerCompatibility and ProgressIndicator #5, mapped into the ATP in the ANM Ensure that the SUT, having sent the ACM message, on receipt of a 200 OK Message containing the PSTN XML HighLayerCompatibility set to HLC_VALUE1 and the PSTN XML ProgressIndicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)": β’ sends the ANM message with the ATP including the HLC set to HLC_VALUE1 and the Progress Indicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)". SIP Parameter values: 200 OK INVITE PSTN XML HighLayerCompatibility: HLC_VALUE1 (PIXIT) PSTN XML ProgressIndicator: Interworking has occurred and has resulted in a telecommunication service change (#5) ISUP Parameter values: IAM; ATP HLC1: HLC_VALUE1 (PIXIT) ATP HLC2: HLC_VALUE2 (PIXIT) ANM; ATP HLC: HLC_VALUE1 (PIXIT) ATP Progress Indicator: Interworking has occurred and has resulted in a telecommunication service change (#5) Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 173 TP305008 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Answer Message (ANM)/ SIP selection criteria: PICS 4/18 AND PICS 2/3 ISUP selection criteria: PICS 4/19 Test purpose: An ANM is sent after a 200 OK INVITE is received. PSTN XML BearerCapability and ProgressIndicator #5, mapped into the ATP and TMU in the ANM Ensure that the SUT, having received the IAM message indicating BC fallback and having sent the ACM message, on receipt of a 200 OK Message with PSTN XML BearerCapability information element set to BC_VALUE and the PSTN XML ProgressIndicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)": β’ sends the ANM message with the ATP including the BC set to BC_VALUE and the TMU set to TMU_VALUE and the Progress Indicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)". SIP Parameter values: INVITE: PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 200 OK: PSTN XML BearerCapability: BC_VALUE PSTN XML ProgressIndicator: Interworking has occurred and has resulted in a telecommunication service change (#5) ISUP Parameter values: IAM; USI: Speech/audio3Kbit/s, G.711 A-law USI prime: Unrestr. Digital info T/A, CLEARMODE TMR: 64 kbit/s preferred TMR prime: Speech/audio3Kbit/s ANM; ATP BC: BC_VALUE ATP Progress Indicator: Interworking has occurred and has resulted in a telecommunication service change (#5) TMU: TMU_VALUE Comments: ISUP/BICC SUT SIP IAM INVITE ACM 180 Ringing Ringing tone ANM 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE Values and additional selection criteria for test purposes TP305008 VA_01 TMU_VALUE: speech BC_VALUE: speech VA_02 TMU_VALUE: 3,1 kHz BC_VALUE: 3,1 kHz ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 174
|
f837441d0decd0bfe6419bfc72a0ce86
|
186 009-2
|
6.2.2.6 Sending of the CON message
|
TP306001 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Connect Message (CON)/ SIP selection criteria: ISUP selection criteria: NOT PICS 4/9 Test purpose: CON is sent after 200 was received Ensure that the SUT, having not sent the ACM message, on receipt of a 200 OK INVITE for this call, it shall stop timer TOIW2 (if running): β’ Send CON as determined by BICC/ISUP procedures. β’ Stop any existing awaiting answer indication (e.g. ringing tone) BCI encoded as followed: Interworking indicator: interworking encountered ISUP indicator: ISUP not used all the way ISDN access indicator: terminating access non-ISDN SIP Parameter values: 200 OK INVITE; ISUP Parameter values: CON: Interworking indicator: interworking encountered ISUP indicator: ISUP not used all the way ISDN access indicator: terminating access non-ISDN Comments: ISUP/BICC SUT SIP IAM INVITE CON 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP306002 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Connect Message (CON)/ SIP selection criteria: ISUP selection criteria: NOT PICS 4/9 AND PICS 4/17 Test purpose: IAM received with TMR 64 kBit/s. BCI in the CON indicates ISDN access Ensure that the SUT, having not sent the ACM message, on receipt of a 200 OK INVITE for this call, it shall stop timer TOIW2 (if running): β’ Send CON as determined by BICC/ISUP procedures. β’ Stop any existing awaiting answer indication (e.g. ringing tone) BCI encoded as follows: interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" SIP Parameter values: 200 OK INVITE ISUP Parameter values: CON: interworking indicator: no interworking encountered (0) ISUP indicator: ISUP used all the way ISDN access indicator: "terminating access ISDN" Comments: ISUP/BICC SUT SIP IAM INVITE CON 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 175 TP306003 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Connect Message (CON)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: A CON is sent after a 200 OK INVITE is received. PSTN XML ProgressIndicator #x mapped into the ATP in the CON Ensure that on receipt of a 200 OK message containing the PSTN XML ProgressIndicator set to PI_VALUE sends the CON message with the ATP including the PSTN XML ProgressIndicator set to PI_VALUE. SIP Parameter values: 200 OK INVITE: PSTN XML ProgressIndicator: PI_VALUE (PIXIT) ISUP Parameter values: ANM: ATP Progress Indicator: PI_VALUE (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE CON 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP306004 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Connect Message (CON)/ SIP selection criteria: PICS 4/18 ISUP selection criteria: Test purpose: A CON is sent after a 200 OK INVITE is received. PSTN XML LowLayerCompatibility mapped into the ATP in the CON Ensure that on receipt of a 200 OK Message containing the PSTN XML LowLayerCompatibility set to LLC_VALUE sends the CON message with the ATP including the LLC set to LLC_VALUE. SIP Parameter values: 200 OK INVITE: PSTN XML LowLayerCompatibility: LLC_VALUE (PIXIT) ISUP Parameter values: CON: ATP LLC: PI_VALUE (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE CON 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 176 TP306005 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Connect Message (CON)/ SIP selection criteria: PICS 4/18 AND PICS 2/3 ISUP selection criteria: PICS 4/19 Test purpose: A CON is sent after a 200 OK INVITE is received. PSTN XML HighLayerCompatibility mapped into the ATP in the CON Ensure that on receipt of a 200 OK Message containing the PSTN XML HighLayerCompatibility set to HLC_VALUE1 sends the CON message with the ATP including the HLC set to HLC_VALUE1. SIP Parameter values: 200 OK INVITE: PSTN XML HighLayerCompatibility: HLC_VALUE2 (PIXIT) ISUP Parameter values: IAM; ATP HLC1: HLC_VALUE1 (PIXIT) ATP HLC2: HLC_VALUE2 (PIXIT) ACON: ATP HLC: HLC_VALUE2 (PIXIT) Comments: ISUP/BICC SUT SIP IAM INVITE CON 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE TP306006 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Connect Message (CON)/ SIP selection criteria: PICS 4/18 AND PICS 2/3 ISUP selection criteria: PICS 4/19 Test purpose: A CON is sent after a 200 OK INVITE is received. PSTN XML BearerCompatibility mapped into the ATP and TMU in the CON Ensure that the SUT, having received the IAM message indicating BC fallback on receipt of a 200 OK Message with PSTN XML BeaererCapability set to BC_VALUE, sends the CON message with the ATP including the BC set to BC_VALUE and the TMU set to TMU_VALUE. SIP Parameter values: INVITE; PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 200 OK INVITE PSTN XML BeaererCapability: BC_VALUE ISUP Parameter values: IAM; USI: Speech/audio3Kbit/s, G.711 A-law USI prime: Unrestr. Digital info T/A, G.711 A-law TMR: 64 kbit/s preferred TMR prime: Speech/audio3Kbit/s CON: ATP BC: BC_VALUE TMU: TMU_VALUE Comments: ISUP/BICC SUT SIP IAM INVITE CON 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 177 Values and additional selection criteria for test purposes TP TP306006 VA_01 TMU_VALUE: speech ISUP_VALUE: UDI/TA BC_VALUE: speech VA_02 TMU_VALUE: 3,1 kHz ISUP_VALUE: UDI/TA BC_VALUE: 3,1 kHz TP306007 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Connect Message (CON)/ SIP selection criteria: PICS 4/18 AND PICS 2/3 ISUP selection criteria: PICS 4/19 Test purpose: A CON is sent after a 200 OK INVITE is received. No PSTN XML BearerCompatibility contained in the 200. Sending of TMU in the CON Ensure that the SUT, having received the IAM message indicating BC fallback on receipt of a 200 OK Message without PSTN XML BeaererCapability, sends the CON message with the ATP including the BC set to USI_VALUE and the TMU set to TMU_VALUE. SIP Parameter values: INVITE; PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 200 OK INVITE: no BC ISUP Parameter values: IAM; USI: Speech/audio3Kbit/s, G.711 A-law USI prime: Unrestr. Digital info T/A, G.711 A-law TMR: 64 kbit/s preferred TMR prime: Speech/audio3Kbit/s CON: ATP BC: USI_VALUE TMU: TMU_VALUE Comments: ISUP/BICC SUT SIP IAM INVITE CON 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE Values and additional selection criteria for test purposes TP306007 VA_01 TMU_VALUE: speech ISUP_VALUE: UDI/TA VA_02 TMU_VALUE: 3,1 kHz audio ISUP_VALUE: UDI/TA ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 178 TP306008 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Connect Message (CON)/ SIP selection criteria: PICS 4/18 AND PICS 2/3 ISUP selection criteria: PICS 4/19 Test purpose: A CON is sent after a 200 OK INVITE is received. PSTN XML HighLayerCompatibility and ProgressIndicator #5, mapped into the ATP in the CON Ensure that the SUT on receipt of a 200 OK Message containing the PSTN XML HighLayerCompatibility set to HLC_VALUE1 and the PSTN XML ProgressIndicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)" sends the CON message with the ATP including the HLC set to HLC_VALUE1 and the Progress Indicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)". SIP Parameter values: 200 OK INVITE PSTN XML HighLayerCompatibility: HLC_VALUE1 (PIXIT) PSTN XML ProgressIndicator: Interworking has occurred and has resulted in a telecommunication service change (#5) ISUP Parameter values: IAM; ATP HLC1: HLC_VALUE1 (PIXIT) ATP HLC2: HLC_VALUE2 (PIXIT) CON: ATP HLC: HLC_VALUE1 (PIXIT) ATP Progress Indicator: Interworking has occurred and has resulted in a telecommunication service change (#5) Comments: ISUP/BICC SUT SIP IAM INVITE CON 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 179 TP306009 SIP reference: RFC 3261 [6] ISUP reference: ES 283 027 [1], clause 7.2.3.1.5 TSS reference: ISUP-SIP/Basic call/ Sending of the Connect Message (CON)/ SIP selection criteria: PICS 4/18 AND PICS 2/3 ISUP selection criteria: PICS 4/19 Test purpose: A CON is sent after a 200 OK INVITE is received. PSTN XML BearerCapability and ProgressIndicator #5, mapped into the ATP and TMU in the CON Ensure that the SUT, having received the IAM message indicating BC fallback and having sent the ACM message, on receipt of a 200 OK Message with PSTN XML BearerCapability information element set to BC_VALUE and the PSTN XML ProgressIndicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)" sends the CON message with the ATP including the BC set to BC_VALUE and the TMU set to TMU_VALUE and the Progress Indicator set to "Interworking has occurred and has resulted in a telecommunication service change (#5)". SIP Parameter values: INVITE; PSTN XML first Bearer Capability: INVITE _BC1 PSTN XML second Bearer Capability: INVITE _BC2 200 OK INVITE PSTN XML BearerCapability: BC_VALUE PSTN XML ProgressIndicator: Interworking has occurred and has resulted in a telecommunication service change (#5) ISUP Parameter values: IAM; USI: Speech/audio3Kbit/s, G.711 A-law USI prime: Unrestr. Digital info T/A, G.711 A-law TMR: 64 kbit/s preferred TMR prime: Speech/audio3Kbit/s CON: ATP BC: BC_VALUE ATP Progress Indicator: Interworking has occurred and has resulted in a telecommunication service change (#5) TMU: TMU_VALUE Comments: ISUP/BICC SUT SIP IAM INVITE CON 200 OK INVITE ACK Conversation REL BYE RLC 200 OK BYE Values and additional selection criteria for test purposes TP306009 VA_01 TMU_VALUE: speech ISUP_VALUE: UDI/TA BC_VALUE: speech VA_02 TMU_VALUE: 3,1 kHz ISUP_VALUE: UDI/TA BC_VALUE: 3,1 kHz ETSI ETSI TS 186 009-2 V2.2.1 (2011-03) 180
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.