Datasets:

OrganizedProgrammers
/

ETSISpecContent

Dataset card Data Studio Files Files and versions Community

Split (1)

train · 194k rows

hash stringlengths 32 32	doc_id stringlengths 7 13	section stringlengths 3 121	content stringlengths 0 3.82M
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	2.2 Informative references	The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Recommendation ITU-T E.164: "The international public telecommunication numbering plan".
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	3 Definitions, symbols and abbreviations
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	3.1 Definitions	For the purposes of the present document, the terms and definitions given in [1] and the following apply: Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 [3]. System Under Test (SUT): Refer to ISO/IEC 9646-1 [3]. ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 7 Test Purpose (TP): Refer to ISO/IEC 9646-1 [3]. NOTE: This may contain additional information.
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	3.2 Symbols	For the purposes of the present document, the symbols given in [1] apply.
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	3.3 Abbreviations	For the purposes of the present document, the abbreviations given in [1] and the following apply: ACM Address Complete Message IAM Initial Address Message IUT Implementation Under Test oBCI optional Backward Call Indicator oFCI optional Forward Call Indicator REL RELease message SUT System Under Test TP Test Purpose
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	4 Test Suite Structure (TSS)	The Test Suite Structure is in close alignment with TS 129 163 [1]. SIP-ISUP Basic call Sending_of_IAM TP_101_xxx Sending_of_COT TP_102_xxx Sending_of_SAM TP_103_xxx Sending_of_18x TP_104_xxx Sending_of_200_OK TP_105_xxx Sending_of_REL TP_106_xxx Receipt_of_REL TP_107_xxx Receipt_of_RSC-GRS-CGB TP_108_xxx Receipt_of_REFER TP_109_xxx Autonomous_Release TP_110_xxx ISUP-SIP Basic call Sending_of_INVITE TP_201_xxx Receipt_of_COT TP_202_xxx Sending_of_ACM TP_203_xxx Sending_of_CPG TP_204_xxx Receipt_of_200_OK TP_205_xxx Sending_of_ANM TP_206_xxx Sending_of_CON TP_207_xxx Receipt_of_4xx-5xx-6xx TP_208_xxx Receipt_of_BYE TP_209_xxx Receipt_of_REL TP_210_xxx Receipt_of_RSC-GRS-CGB TP_211_xxx Autonomous_Release TP_212_xxx ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 8 PSTN-SS PSTN-SS/COL TP_302_xxx PSTN-SS/MCID TP_303_xxx PSTN-SS/SUB TP_304_xxx PSTN-SS/CDIV TP_305_xxx PSTN-SS/ECT TP_306_xxx PSTN-SS/CW TP_307_xxx PSTN-SS/HOLD TP_308_xxx PSTN-SS/CCBS TP_309_xxx PSTN-SS/CCNR TP_310_xxx PSTN-SS/TP TP_311_xxx PSTN-SS/CONF TP_312_xxx PSTN-SS/CUG TP_313_xxx PSTN-SS/MLPP TP_314_xxx PSTN-SS/GVNS TP_315_xxx PSTN-SS/REV TP_316_xxx PSTN-SS/UUS TP_317_xxx PSTN-SS/ACR TP_318_xxx IMS-SS IMS-SS/OIP-OIR TP_401_xxx IMS-SS/TIP-TIR TP_402_xxx IMS-SS/CDIV TP_403_xxx PSTN-SS/CONF TP_404_xxx IMS-SS/MCID TP_406_xxx IMS-SS/CUG TP_407_xxx IMS-SS/CC TP_408_xxx IMS-SS/CW TP_409_xxx
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	5 Test Purposes (TP)
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	5.1 Introduction	For each requirement in [1] a TP is defined.
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	5.1.1 TP naming convention	TPs are numbered, starting at 001, within each group. Groups are organized according to the TSS. Additional references are added to identify the actual test suite and whether it applies to the network or the user (see table 5.1.1-1). Table 5.1.1-1: TP identifier naming convention scheme Identifier: TP_<group>_<nnn> <group> = group 3 digit field representing group reference according to TSS <nnn> = TP number 3 digit sequential number (001 to 999)
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	5.1.2 Test strategy	As the base standard TS 129 163 [1] contains no explicit requirements for testing, the TPs were generated as a result of an analysis of the base standard and the PICS specification TS 102 710-1 [2]. The criteria applied include the following: • whether or not a test case can be built from the TP is not considered. ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 9
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	5.1.3 Test purpose structure	The test purpose structure is according to the test suite structure (TSS). The Reference column in each Test Purpose refers to the basic specification [1] except stated explicitly.
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6 Test purposes (TP)
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1 SIP-ISUP protocol interworking
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.1 Incoming call interworking from SIP to ISUP at I-MGCF
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.1.1 Sending of IAM	TP number TP_101_001 Reference 7.2.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria Test Purpose name Sending of IAM Test Purpose Ensure that on reception of a SIP INVITE requesting a session, the I-MGCF sends an IAM message ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 10 TP number TP_101_002 Reference 7.2.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.1.1/1 AND PICS 6.2.1/1 AND PICS 6.2.1/2 Test Purpose name Preconditions support indicated in the Supported header COT procedure supported Test Purpose Ensure that the Preconditions procedure is successful if the support of Precondition is indicated in the Supported header. The IAM is immediately sent. The Nature of connection indicator is set to 'continuity check performed on a previous circuit' or 'continuity check required'. After the UPDATE was received, a COT is sent ISUP Parameter values IAM: Nature of connection indicator = 'continuity check performed on a previous circuit' or 'continuity check required' COT: Continuity indicator = 'Continuity check successful' SIP Parameter values INVITE: Supported: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 183 Session Progress PRACK 200 OK (PRACK) UPDATE COT 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 11 TP number TP_101_003 Reference 7.2.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.1.1/1 AND PICS 6.2.1/1 AND NOT PICS 6.2.1/2 Test Purpose name Preconditions support indicated in the Supported header Test Purpose Ensure that the Preconditions procedure is successful if the support of Precondition is indicated in the Supported header. The IAM is sent after the UPDATE was received. The Nature of connection indicator is set to 'continuity check is not required' ISUP Parameter values IAM: Nature of connection indicator = 'continuity check is not required' SIP Parameter values INVITE: Supported: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows Mg MGCF ISUP INVITE 100 Trying 183 Session Progress PRACK 200 OK (PRACK) UPDATE IAM 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 12 TP number TP_101_004 Reference 7.2.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.1.1/1 AND PICS 6.2.1/1 AND PICS 6.2.1/2 Test Purpose name Preconditions support indicated in the Require header Test Purpose Ensure that the Preconditions procedure is successful if the support of Precondition is indicated in the Require header. The IAM is immediately sent. The Nature of connection indicator is set to 'continuity check performed on a previous circuit' or 'continuity check required'. After the UPDATE was received, a COT is sent ISUP Parameter values IAM: Nature of connection indicator = 'continuity check performed on a previous circuit' or 'continuity check required' COT: Continuity indicator = 'Continuity check successful' SIP Parameter values INVITE: Require: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 183 Session Progress PRACK 200 OK (PRACK) UPDATE COT 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 13 TP number TP_101_005 Reference 7.2.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.1.1/1 AND PICS 6.2.1/1 AND PICS 6.2.1/2 Test Purpose name Preconditions support indicated in the Require header Test Purpose Ensure that the Preconditions procedure is successful if the support of Precondition is indicated in the Require header. The IAM is sent after the UPDATE was received. The Nature of connection indicator is set to 'continuity check is not required' ISUP Parameter values IAM: Nature of connection indicator = 'continuity check is not required' SIP Parameter values INVITE: Require: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows Mg MGCF ISUP INVITE 100 Trying 183 Session Progress PRACK 200 OK (PRACK) UPDATE IAM 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 14 TP number TP_101_006 Reference 7.3.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.1.1/2 AND PICS 6.2.1/1 AND PICS 6.2.1/2 Test Purpose name Preconditions support indicated in the Supported header COT procedure supported Test Purpose Ensure that the Preconditions procedure is successful if the support of Precondition is indicated in the Supported header. The IAM is immediately sent. The Nature of connection indicator is set to 'COT to be expected'. After the UPDATE was received, a COT is sent ISUP Parameter values IAM: Nature of connection indicator = 'COT to be expected' COT: Continuity indicator = 'Continuity check successful' SIP Parameter values INVITE: Supported: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 183 Session Progress PRACK 200 OK (PRACK) UPDATE COT 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 15 TP number TP_101_007 Reference 7.3.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.1.1/2 AND PICS 6.2.1/1 AND NOT PICS 6.2.1/2 Test Purpose name Preconditions support indicated in the Supported header Test Purpose Ensure that the Preconditions procedure is successful if the support of Precondition is indicated in the Supported header. The IAM is sent after the UPDATE was received. The Nature of connection indicator is set to 'no COT to be expected' ISUP Parameter values IAM: Nature of connection indicator = 'no COT to be expected' SIP Parameter values INVITE: Supported: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows Mg MGCF ISUP INVITE 100 Trying 183 Session Progress PRACK 200 OK (PRACK) UPDATE IAM 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 16 TP number TP_101_008 Reference 7.3.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.1.1/2 AND PICS 6.2.1/1 AND PICS 6.2.1/2 Test Purpose name Preconditions support indicated in the Require header Test Purpose Ensure that the Preconditions procedure is successful if the support of Precondition is indicated in the Require header. The IAM is immediately sent. The Nature of connection indicator is set to 'COT to be expected'. After the UPDATE was received, a COT is sent ISUP Parameter values IAM: Nature of connection indicator = 'COT to be expected' COT: Continuity indicator = 'Continuity check successful' SIP Parameter values INVITE: Require: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 183 Session Progress PRACK 200 OK (PRACK) UPDATE COT 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 17 TP number TP_101_009 Reference 7.3.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.1.1/2 AND PICS 6.2.1/1 AND PICS 6.2.1/2 Test Purpose name Preconditions support indicated in the Require header Test Purpose Ensure that the Preconditions procedure is successful if the support of Precondition is indicated in the Require header. The IAM is sent after the UPDATE was received. The Nature of connection indicator is set to 'no COT to be expected' ISUP Parameter values IAM: Nature of connection indicator = 'no COT to be expected' SIP Parameter values INVITE: Require: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows Mg MGCF ISUP INVITE 100 Trying 183 Session Progress PRACK 200 OK (PRACK) UPDATE IAM 200 OK (UPDATE) Apply post test routine TP number TP_101_010 Reference 7.2.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria Test Purpose name Unsupported media type is rejected 488 is sent Test Purpose Ensure that an unsupported media type is rejected a 488 Not Acceptable Here final response is sent to the calling user ISUP Parameter values SIP Parameter values INVITE: SDP: m= video 4713 RTP/AVP 31 Comments Message flows Mg MGCF ISUP INVITE 488 Not Acceptable Here ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 18 TP number TP_101_011 Reference 7.2.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria Test Purpose name Unsupported media type is rejected session successful Test Purpose Ensure that an unsupported media type is rejected. The SUT sends in the SDP answer the port number '0' for the concerned media type ISUP Parameter values SIP Parameter values INVITE: SDP: m=audio 4711 RTP/AVP 8 m= video 4713 RTP/AVP 31 180 Ringing or 183 Session Progress SDP: m=audio <appropriate Port #> RTP/AVP 8 m=video 0 RTP/AVP 31 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying ACM CASE A 180 Ringing CASE B 183 Session Progress Apply post test routine TP number TP_101_012 Reference 7.2.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria Test Purpose name Unsupported codec is deselected Test Purpose Ensure that the SUT removes a codec from the codec list in the SDP answer if the codec is an unsupported codec ISUP Parameter values SIP Parameter values INVITE: SDP: m=audio 4711 RTP/AVP <unsupported codec> 8 180 Ringing or 183 Session Progress SDP: m=audio <appropriate Port #> RTP/AVP 8 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying ACM CASE A 180 Ringing CASE B 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 19 TP number TP_101_013 Reference 7.2.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria Test Purpose name INVITE request without SDP offer received Test Purpose Ensure that on receipt of an INVITE request without a SDP offer, the SUT sends a SDP offer in the first reliable non-failure message. ISUP Parameter values SIP Parameter values INVITE: Supported: 100rel 180 Ringing or 183 Session Progress SDP: m=audio 4711 RTP/AVP 8 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying ACM CASE A 180 Ringing PRACK 200 OK PRACK CASE B 183 Session Progress PRACK 200 OK PRACK Apply post test routine TP number TP_101_014 Reference 7.2.3.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria Test Purpose name To header tag is sent in the first provisional response Test Purpose Ensure that a To header tag is contained in the first provisional response ISUP Parameter values SIP Parameter values INVITE: To: <URI> 180 Ringing or 183 Session Progress: To: <URI>; <tag> Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying ACM CASE A 180 Ringing CASE B 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 20 TP number TP_101_015 Reference 7.2.3.1.2 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria Test Purpose name Coding of called party number Test Purpose Ensure that an IAM is sent after an INVITE request was received. • In case of the 'CC' of the received INVITE request URI is equal to the country code in which the next hop terminates: remove 'CC' from the user info and send the remaining part as digits in the called party number. The nature of address indicator is set to 'National (Significant) number' • In case of the 'CC' of the received INVITE request URI is not equal to the country code in which the next hop terminates: send the unchanged part of the request URI without '+' as digits in the called party number. The nature of address indicator is set to 'International number' The internal Network Number Indicator = 'routing to internal network number not allowed' Numbering Plan Indicator = 'ISDN (Telephony) numbering plan (Recommendation ITU-T E.164 [i.1])' ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_101_016 Reference 7.2.3.1.2.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.1/21 Test Purpose name SendingCompleteIndication is mapped into a hex digit 'F' in the called party number Test Purpose Ensure that on receipt of a PSTN XML SendingCompleteIndication element a hex digit 'F' is sent al last digit in the called party number ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_101_017 Reference 7.2.3.1.2.2 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.1.1/1 Test Purpose name Nature of connection indicator Test Purpose Ensure that an IAM is sent after an INVITE request was received. The nature of connection indicator is set Satellite indicator = 'no satellite circuit in the connection' Continuity check indicator = 'continuity check not required' or 'continuity check required' or 'continuity check performed on a previous circuit' Echo control device indicator • TMR audio 3,1 kHz or speech = outgoing echo control device included • TMR 64 kBit/s or HLC 'Facsimile Group 2/3' = 'outgoing echo control device not included' ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 21 TP number TP_101_018 Reference 7.2.3.1.2.2 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.1.1/2 Test Purpose name Nature of connection indicator Test Purpose Ensure that an IAM is sent after an INVITE request was received. The nature of connection indicator is set Satellite indicator = 'no satellite circuit in the connection' Continuity check indicator = 'no COT to be expected or 'COT to be expected' Echo control device indicator = outgoing echo control device included ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_101_019 Reference 7.2.3.1.2.3 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria NOT PICS 6.2.1/5 Test Purpose name Forward Call indicator Test Purpose Ensure that an IAM is sent after an INVITE request was received. If no PSTN XML attachment is present and the receipt of TMR audio ,the Forward call indicator is coded as follows: • End-to-end method indicator = ('00') no end-to-end method available (only link-by-link method available) • Interworking indicator = ('1') interworking encountered • End-to-end information indicator = ('0') no end-to-end information available • ISDN user part/BICC indicator = ('0') ISDN user part/BICC not used all the way • ISDN user part/BICC preference indicator = ('01') ISDN user part/BICC not required all the way • ISDN access indicator = ('0') originating access non-ISDN • SCCP method indicator = ('00') no indication ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 22 TP number TP_101_020 Reference 7.2.3.1.2.3 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria NOT PICS 6.2.1/5 AND NOT PICS 6.2.1/6 Test Purpose name Forward Call indicator Test Purpose Ensure that an IAM is sent after an INVITE request was received. If no PSTN XML attachment is present and the receipt of TMR 64 kBit/s has no impact of the coding of the Forward call indicator. The Forward call indicator is coded as follows: • End-to-end method indicator = ('00') no end-to-end method available (only link-by-link method available) • Interworking indicator = ('1') interworking encountered • End-to-end information indicator = ('0') no end-to-end information available • ISDN user part/BICC indicator = ('0') ISDN user part/BICC not used all the way • ISDN user part/BICC preference indicator = ('01') ISDN user part/BICC not required all the way • ISDN access indicator = ('0') originating access non-ISDN • SCCP method indicator = ('00') no indication ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_101_021 Reference 7.2.3.1.2.3 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.1/6 Test Purpose name Forward Call indicator Test Purpose Ensure that an IAM is sent after an INVITE request was received. If no PSTN XML attachment is present and the receipt of TMR 64 kBit/s has impact of the coding of the Forward call indicator, the Forward call indicator is coded as follows: • End-to-end method indicator = ('00') no end-to-end method available (only link-by-link method available) • Interworking indicator = ('0') no interworking encountered • End-to-end information indicator = ('0') no end-to-end information available • ISDN user part/BICC indicator = ('1') ISDN user part/BICC used all the way • ISDN user part/BICC preference indicator = ('01') ISDN user part/BICC not required all the way • ISDN access indicator = ('1') originating access ISDN • SCCP method indicator = ('00') no indication ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 23 TP number TP_101_022 Reference 7.2.3.1.2.3, Table 02a TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.1/5 Test Purpose name Forward Call indicator Test Purpose Ensure that an IAM is sent after an INVITE request was received. If the PSTN XML attachment is present the ProgressIndicator value ProgressDescription = 6, the Forward call indicator is coded as follows: • End-to-end method indicator = ('00') no end-to-end method available (only link-by-link method available) • End-to-end information indicator = ('0') no end-to-end information available • ISDN user part/BICC indicator = ('1') ISDN user part/BICC used all the way • ISDN user part/BICC preference indicator = ('01') ISDN user part/BICC not required all the way • ISDN access indicator = ('1') originating access ISDN • SCCP method indicator = ('00') no indication ISUP Parameter values IAM: Forward call indicator SIP Parameter values INVITE: PSTM XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet3 CodingStandard>00< Location>yyyy< ProgressOctet4 ProgressDescription>0000110< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_101_023 Reference 7.2.3.1.2.4 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria Test Purpose name Mapping of calling party category Test Purpose Ensure that a cpc parameter SIP_CPC received in the P-Asserted-Identity URI parameter and the "language" in the Accept-Language SIP_LANG header is mapped into the calling party parameter category ISUP_CPC in the sent IAM. The mapping is described in table 6.1.1.1-1 ISUP Parameter values IAM: Calling Party Category = ISUP_CPC SIP Parameter values INVITE: P-Asserted-Identity = PARAM, Accept-Language = SIP_LANG Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 24 Table 6.1.1.1-1: Coding of calling party category Values for test purposes TP101032 SIP_CPC ISUP_CPC cpc received in a P-Asserted-Identity PARAM Accept-Language SIP_LANG Sent Calling party's category operator fr operator, language French operator en operator, language English operator de operator, language German operator ru operator, language Russian operator es operator, language Spanish ordinary ordinary calling subscriber test test call payphone payphone cellular mobile terminal located in the home PLMN cellular-roaming mobile terminal located in a visited PLMN IEPS IEPS call marking for preferential call set up TP number TP_101_024 Reference 7.2.3.1.2.5 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria Test Purpose name Coding of TMR Test Purpose Ensure that an IAM is sent after an INVITE request was received. The Transmission Medium Requirement parameter in the IAM is set according the mapping described in table 6.1.1.1-2 ISUP Parameter values IAM: TMR SIP Parameter values INVITE: SDP m line a attributes Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.1.1.1-2: Coding of TMR TMR_VA m= line a= line TMR parameter <media> <transport> <fmt-list> rtpmap:<dynamic-PT> <encoding name> <clock rate>[<encoding parameters>] TMR codes VA_01 audio RTP/AVP 0 N/A "3,1 kHz audio" VA_02 audio RTP/AVP Dynamic PT rtpmap:<dynamic-PT> PCMU/8000 "3,1 kHz audio" VA_03 audio RTP/AVP 8 N/A "3,1 kHz audio" VA_04 audio RTP/AVP Dynamic PT rtpmap:<dynamic-PT> PCMA/8000 "3,1 kHz audio" VA_05 audio RTP/AVP Dynamic PT rtpmap:<dynamic-PT> CLEARMODE/8000 "64 kbit/s unrestricted" VA_06 image Udptl t38 Based on ITU-T T.38 [4] "3,1 kHz audio" VA_07 image tcptl t38 Based on ITU-T T.38 [4] "3,1 kHz audio" ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 25 TP number TP_101_025 Reference 7.2.3.1.2.5 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria Test Purpose name Coding of USI Test Purpose Ensure that an IAM is sent after an INVITE request was received. The User service Information parameter in the IAM is set according the mapping described in table 6.1.1.1-3 if present. ISUP Parameter values IAM: USI SIP Parameter values INVITE: SDP m line a attributes Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.1.1.1-3: Coding of USI USI_VA m= line a= line USI parameter <media> <transport> <fmt-list> Information Transport Capability User Information Layer 1 Protocol Indicator VA_01 audio RTP/AVP Dynamic PT rtpmap:<dynamic-PT> CLEARMODE/8000 "Unrestricted digital information" or "Unrestricted digital inf. w/tones/ann" VA_02 image Udptl t38 Based on ITU-T T.38 [4] "3,1 kHz audio" VA_03 image tcptl t38 Based on ITU-T T.38 [4] "3,1 kHz audio" TP number TP_101_026 Reference 7.2.3.1.2.5 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria Test Purpose name Coding of HLC Test Purpose Ensure that an IAM is sent after an INVITE request was received. The High Layer Compatibility parameter in the IAM is set according the mapping described in table 6.1.1.1-4 ISUP Parameter values IAM: HLC SIP Parameter values INVITE: SDP m line a attributes Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.1.1.1-4: Coding of HLC HLC_VA m= line a= line HLC parameter (optional) <media> <transport> <fmt-list> rtpmap:<dynamic-PT> <encoding name> <clock rate>[<encoding parameters>] High Layer Characteristics Identification VA_01 image Udptl t38 Based on ITU-T T.38 [4] "Facsímile Group 2/3" VA_02 image tcptl t38 Based on ITU-T T.38 [4] "Facsímile Group 2/3" ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 26 TP number TP_101_027 Reference 7.2.3.1.2.5 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML HighLayerCompatibility Test Purpose Ensure that on receipt of a PSTN XML attachment in an INVITE request containing a HighLayerCompatibility element, this information is mapped into a High Layer Compatibility IE present in an ISUP Access Transport Parameter the High Layer Characteristics value is derived from the PSTN XMLHighLayerCharacteristics element ISUP Parameter values IAM: ATP High Layer Compatibility High Layer Characteristics>HLC_value SIP Parameter values INVITE: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_value< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.1.1.1-5: Mapping of PSTN XML HighLayerCharacteristic to ISUP ATP High layer compatibility HLC_value XML HighLayerCharacteristic DSS1 High layer characteristics identification HLC_VA_1 '0000001' Telephony HLC_VA_2 '0000100' Facsimile Group 2/3 HLC_VA_3 '0100001' Facsimile Group 4 Class I HLC_VA_4 '0100100' Facsimile service Group 4, Classes II and III HLC_VA_5 '0110010' Syntax based Videotex HLC_VA_6 '0110011' International Videotex interworking via gateways or interworking units HLC_VA_7 '0110101' Telex service HLC_VA_8 '1000010' FTAM application HLC_VA_9 '1100000' Videotelephony ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 27 TP number TP_101_028 Reference 7.2.3.1.2.5 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML LowLayerCompatibility Test Purpose Ensure that on receipt of a PSTN XML attachment in an INVITE request containing a LowLayerCompatibility element, this information is mapped into a Low Layer Compatibility IE present in an ISUP Access Transport Parameter the Information Transfer Capability value is derived from the PSTN XMLInformationTransferCapability element ISUP Parameter values IAM: ATP Low Layer Compatibility InformationTransferCapability=ITC_VA SIP Parameter values INVITE: <?xml version="1.0" encoding="utf-8"?> PSTN LowLayerCompatibility> LLOctet3> CodingStandard>00< InformationTransferCapability>ITC_VA< LLOctet4> TransferMode>00< InformationTransferRate>10000< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.1.1.1-6: Mapping of PSTN XML LowLayerCompatibility to ISUP ATP Low Layer Compatibility ITC_value XML LLC InformationTransferCapability LLC Information transfer capability ITC_VA_1 '00000' Speech ITC_VA_2 '10000' 3,1 kHz audio ITC_VA_3 '01001' Unrestricted digital info ITC_VA_4 '10001' 7 kHz audio TP number TP_101_029 Reference 7.2.3.1.2.5 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML BearerCapability into TMR and USI Test Purpose Ensure that on receipt of a PSTN XML attachment in an INVITE request containing a BearerCapability element, this information is mapped into a User Service Information Parameter the Information Transfer Capability value is derived from the PSTN XMLInformationTransferCapability element ISUP Parameter values IAM: USI Information Transfer Capability=ITC_value SIP Parameter values <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>ITC_value< BCoctet4 TransferMode>00< InformationTransferRate>10000< BCoctet5 Layer1Identification>01< UserInfoLayer1Protocol>00011< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 28 Table 6.1.1.1-7: Mapping of PSTN XML BearerCapability to ISUP User Service Information ITC_value XML InformationTransferCapability USI Information transfer capability ITC_VA_1 '00000' Speech ITC_VA_2 '10000' 3,1 kHz audio ITC_VA_3 '01000' unrestricted digital information TP number TP_101_030 Reference 7.2.3.1.2.5 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.1/5AND PICS 6.2.1/7 Test Purpose name Mapping of PSTN XML HighLayerCompatibility into User Teleservice Information parameter Test Purpose Ensure that on receipt of a PSTN XML attachment in an INVITE request containing a HighLayerCompatibility element, this information is mapped into a User Teleservice Information parameter the High Layer Characteristics value is derived from the PSTN XML HighLayerCharacteristics element ISUP Parameter values IAM: UTI High Layer Characteristics>HLC_value SIP Parameter values INVITE: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_value< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.1.1.1-8: Mapping of PSTN XML HighLayerCharacteristic to ISUP User Teleservice Information HLC_value XML HighLayerCharacteristic DSS1 High layer characteristics identification HLC_VA_1 '0000001' Telephony HLC_VA_2 '0000100' Facsimile Group 2/3 HLC_VA_3 '0100001' Facsimile Group 4 Class I HLC_VA_4 '0100100' Facsimile service Group 4, Classes II and III HLC_VA_5 '0110010' Syntax based Videotex HLC_VA_6 '0110011' International Videotex interworking via gateways or interworking units HLC_VA_7 '0110101' Telex service HLC_VA_8 '1000010' FTAM application HLC_VA_9 '1100000' Videotelephony ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 29 TP number TP_101_031 Reference 7.2.3.1.2.5a TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.1/5 Test Purpose name Fall Back connection type is sent Test Purpose Ensure that on receipt of two BearerCapability elements in a INVITE PSTN XML MIME body: • The first stated codec in the SDP m line is the equivalent to the second BearerCapability element, the BearerCapability element is mapped into the User Service prime (USI prime) parameter in the sent IAM, the TMR is set according the second PSTN XML InformationTransferCapability value • The second stated codec in the SDP m line is the equivalent to the first BearerCapability element, the BearerCapability element is mapped into the User Service Information (USI) parameter in the sent IAM, the TMR prime is set according the first PSTN XML InformationTransferCapability value ISUP Parameter values IAM: TMR = second InformationTransferCapability TMR prime = first InformationTransferCapability USI = first BearerCapability USI prime = second BearerCapability SIP Parameter values INVITE: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>00000< or InformationTransferCapability>10000< …. BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>10001< …. Comments SDP: m line contains as the first codec CLEARMODE and as the second codec a G.711 codec Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 30 TP number TP_101_032 Reference 7.2.3.1.2.5a TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.1/5 Test Purpose name Fall Back connection type is not sent Test Purpose Ensure that on receipt of two BearerCapability elements in a INVITE PSTN XML MIME body: • The first stated codec in the SDP m line is the equivalent to the second BearerCapability element, the BearerCapability element is mapped into the User Service prime (USI prime) parameter in the sent IAM, the TMR is set according the second PSTN XML InformationTransferCapability value • The second stated codec in the SDP m line is the equivalent to the first BearerCapability element, the BearerCapability element is mapped into the User Service Information (USI) parameter in the sent IAM, the TMR prime is set according the first PSTN XML InformationTransferCapability value Ensure that the IAM does not contain the Fallback connection type if the succeeding network does not support the Fallback connection type: • TMR = Speech or audio 3,1 kHz • USI = Speech or audio 3,1 kHz • A TMR prime parameter is not present • A USI prime is not present ISUP Parameter values IAM: TMR = first InformationTransferCapability TMR prime = is not present USI = speech or audio 3,1 kHz USI prime = is not present SIP Parameter values INVITE: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>00000< or InformationTransferCapability>10000< BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>10001< SDP: m=audio <proper port number> RTP/AVP CLEARMODE 8 … Comments SDP: m line contains as the first codec CLEARMODE and as the second codec a G.711 codec Configuration: the succeeding network does not support the Fall back connection type Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_101_033 Reference 7.2.3.1.2.9 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.1/8 Test Purpose name Max-Forwards received, HOP is sent Test Purpose Ensure that on receipt of the Max-Forwards header, the value is mapped into the Hop counter. The value of the HOP is created from the Max-Forwards header value by applying a given factor ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 31 TP number TP_101_034 Reference 7.2.3.1.2.10 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator Test Purpose Ensure that on receipt of a PSTN XML attachment in an INVITE request containing a ProgressIndicator element, this information is mapped into a Progress Indicator IE present in an ISUP Access Transport Parameter the Progress description value is derived from the PSTN XML ProgressDescription element ISUP Parameter values IAM: ATP Progress Indicator Progress Description=PI_value SIP Parameter values INVITE: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet3 CodingStandard>00< Location>0000< ProgressOctet4 ProgressDescription>PI_value< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.1.1.1-9: Mapping of PSTN XML ProgressIndicator to ISUP ATP Progress Indicator PI_value XML ProgressIndicator ProgressDescription ATP Progress Indicator value PI_VA_1 '0000001' Call is not end-to-end ISDN; further call progress information may be available in-band PI_VA_2 '0000010' Destination address is non-ISDN PI_VA_3 '0000011' Origination address is non-ISDN PI_VA_4 '0000100' Call has returned to the ISDN PI_VA_5 '0000101' Interworking has occurred and has resulted in a telecommunication service change PI_VA_6 '0001000' In-band information or an appropriate pattern is now available ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 32 TP number TP_101_035 Reference 7.2.3.1.2A.1.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.2/1 Test Purpose name Number Portability Separate Directory Number Addressing Method is used. A Called Directory Number is present in the sent IAM Test Purpose Ensure that on receipt of an initial INVITE request containing the rn and npdi parameters in the request line, an IAM is sent. The Called Party Number is set to: • Nature of address indicator: "Network routing number in national (significant) number format" or "National (significant) number" or "Network routing number in network specific number format" • Internal Network Number Indicator: routing to internal network number not allowed • Numbering plan Indicator: ISDN (Telephony) numbering plan (Recommendation E.164 [i.1]) • Address Signal: derived from the user info of the request URI the country code is removed. The Called Directory Number is set to: • Nature of address indicator "National (significant) number" • Internal Network Number Indicator: routing to internal network number not allowed • Numbering plan Indicator: ISDN (Telephony) numbering plan (Recommendation E.164 [i.1]) • Address Signal: derived from the rn parameter if the Number Portability Routing Number contains an E164 number the country code is removed else the address digits applied unchanged ISUP Parameter values IAM: Called party number, Called Directory Number SIP Parameter values INVITE: Request URI: sip: <called number>; rn=<Number Portability Routing Number>; npdi Comments The URI parameters can be received in arbitrary order Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_101_036 Reference 7.2.3.1.2A.1.2 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.2/2 Test Purpose name Number Portability Concatenated Addressing Method is used. The called party number is present Test Purpose Ensure that on receipt of an initial INVITE request containing the rn and npdi parameters in the request line, an IAM is sent. The Called Party Number is set to: • Nature of address indicator: "Network routing number concatenated with called directory number" or "National (significant) number" • Internal Network Number Indicator: routing to internal network number not allowed • Numbering plan Indicator: ISDN (Telephony) numbering plan (Recommendation E.164 [i.1]) • Address Signal: derived from the rn parameter if the Number Portability Routing Number contains an E164 number the country code is removed else the address digits applied unchanged. The called party number derived from the user info is appended except the country code ISUP Parameter values IAM: Called party number SIP Parameter values INVITE: Request URI: sip: <called number>; rn=<Number Portability Routing Number>; npdi Comments The URI parameters can be received in arbitrary order Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 33 TP number TP_101_037 Reference 7.2.3.1.2A.1.3 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.2/3 Test Purpose name Number Portability Separate Network Routing Number Addressing Method is used. A Network Routing Number is present in the sent IAM Test Purpose Ensure that on receipt of an initial INVITE request containing the rn and npdi parameters in the request line, an IAM is sent. The Called Party Number is set to: • Nature of address indicator: "National (significant) number" • Internal Network Number Indicator: routing to internal network number not allowed • Numbering plan Indicator: ISDN (Telephony) numbering plan (Recommendation E.164 [i.1]) • Address Signal: derived from the user info of the request URI the country code is removed. The Network Routing Number is set to: • Nature of address indicator: "Network routing number in national (significant) number format" or "Network routing number in network specific number format" • Numbering plan Indicator: ISDN (Telephony) numbering plan (Recommendation E.164 [i.1]) • Address Signal: derived from the rn parameter if the Number Portability Routing Number contains an E164 number the country code is removed else the address digits applied unchanged ISUP Parameter values IAM: Called party number, Network Routing Number SIP Parameter values INVITE: Request URI: sip: <called number>; rn=<Number Portability Routing Number>; npdi Comments The URI parameters can be received in arbitrary order Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_101_038 Reference 7.2.3.1.2A.2 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.2/1 OR PICS 6.2.2/2 OR PICS 6.2.2/3 AND PICS 6.2.2/4 Test Purpose name Sending of Number Portability Forward Information Test Purpose Ensure that on receipt of an initial INVITE request containing the npdi parameters in the request line, an IAM is sent. The IAM contains the Number Portability Forward Information parameter set according the following roles: • If the Number Portability Database Dip Indicator is present, and there is no Number Portability Routing Number, set to "number portability query done for called number, non-ported called subscriber" ISUP Parameter values IAM: Number Portability Forward Information SIP Parameter values INVITE: Request URI: sip: <called number>; npdi Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 34 TP number TP_101_039 Reference 7.2.3.1.2A.2 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.2/1 OR PICS 6.2.2/2 OR PICS 6.2.2/3 AND PICS 6.2.2/4 Test Purpose name Sending of Number Portability Forward Information Test Purpose Ensure that on receipt of an initial INVITE request containing the rn and npdi parameters in the request line, an IAM is sent. The IAM contains the Number Portability Forward Information parameter set according the following roles: • If the Number Portability Database Dip Indicator is present, and a Number Portability Routing Number is present, set to "number portability query done for called number, ported called subscriber" ISUP Parameter values IAM: Number Portability Forward Information SIP Parameter values INVITE: Request URI: sip: <called number>; rn=<Number Portability Routing Number>; npdi Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_101_040 Reference 7.2.3.1.2A.2 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.2/1 OR PICS 6.2.2/2 OR PICS 6.2.2/3 AND PICS 6.2.2/4 Test Purpose name Sending of Number Portability Forward Information Test Purpose Ensure that on receipt of an initial INVITE request containing the rn parameters in the request line, an IAM is sent. The IAM contains the Number Portability Forward Information parameter set according the following roles: • If there is no Number Portability Database Dip Indicator, set to "number portability query not done for called number" ISUP Parameter values IAM: Number Portability Forward Information SIP Parameter values INVITE: Request URI: sip: <called number>; rn=<Number Portability Routing Number> Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_101_041 Reference 7.2.3.1.2B.1 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.2/5 AND PICS 6.2.2/6 AND PICS 6.2.2/8 Test Purpose name Request URI cic parameter is mapped into IAM TNS parameter Test Purpose Ensure that on receipt of an initial INVITE request containing the cic parameter in the request line, an IAM is sent. The Transit network selection parameter is set to: • Type of network identification: CCITT-standardized identification or national network identification • Network identification plan: according value of Type of network identification • Network identification: digits derived from the carrier identification code value of the cic parameter ISUP Parameter values IAM: Transit network selection SIP Parameter values INVITE: Request URI: sip: <called number>; cic=< Carrier identification code > Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 35 TP number TP_101_042 Reference 7.2.3.1.2B.2 TSS reference SIP-ISUP/Basic call/Sending_of_IAM/ Selection criteria PICS 6.2.2/5 AND PICS 6.2.2/7 AND PICS 6.2.2/8 AND PICS 6.2.2/9 Test Purpose name Carrier Selection Information parameter is sent Test Purpose Ensure that on receipt of an initial INVITE request containing the cic and dai parameter in the request line, an IAM is sent. The Carrier Selection Information parameter is set to the values indicated in table 6.1.1.1-10 ISUP Parameter values IAM: Carrier Selection Information SIP Parameter values INVITE: Request URI: sip: <called number>; cic=< Carrier identification code >; dai= SIP_dai Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.1.1.1-10: Mapping of SIP Dial Around Indicator to ISUP Carrier Selection Information SIP_dai SIP "dai=" component ISUP Carrier Selection Information parameter SIP_dai_VA_01 'no ind' 'no indication' (00) SIP_dai_VA_02 "presub" 'selected carrier identification code pre-subscribed and no input by calling party' (01) SIP_dai_VA_03 "presub-da" selected carrier identification code presubscribed and input by calling party (02) SIP_dai_VA_04 "presub-daUnkwn" selected carrier identification pre-subscribed and input by calling party undetermined (03) SIP_dai_VA_05 "da" selected carrier identification not pre-subscribed, and input by calling party (04) SIP_dai_VA_06 "CIC-chrgPty" 'no indication' (00) SIP_dai_VA_07 "altCIC-chrgPty" 'no indication' (00) SIP_dai_VA_08 "verbal-clgPty" selected carrier identification code not presubscribed and input by calling party (04) SIP_dai_VA_09 "verbal-chrgPty" 'no indication' (00) SIP_dai_VA_10 "emergency" 'no indication' (00) SIP_dai_VA_11 "presubUnkwn-da" carrier selected by input from calling party (10) SIP_dai_VA_12 "operator" carrier selected by a network operator (11) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 36
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.1.2 Sending of COT	TP number TP_102_001 Reference 7.2.3.1.3 TSS reference SIP-ISUP/Basic call/Sending_of_COT/ Selection criteria PICS 6.1.1/1 AND PICS 6.2.1/1 AND NOT PICS 6.2.1/4 Test Purpose name Sending of ISUP COT Test Purpose If the IAM has already been sent, the Continuity message shall be sent indicating "continuity check successful", when all of the following conditions have been met: • the requested preconditions (if any) in the IMS network have been met • a possible outstanding continuity check procedure is successfully performed on the outgoing circuit ISUP Parameter values IAM: Nature of connection indicator = "Continuity check performed on a previous circuit" or "Continuity check required on this circuit" COT continuity indicator: Continuity check successful SIP Parameter values INVITE: Require: precondition SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 183 Session Progress PRACK 200 OK (PRACK) UPDATE COT 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 37 TP number TP_102_002 Reference 7.3.3.1.3 TSS reference SIP-ISUP/Basic call/Sending_of_COT/ Selection criteria PICS 6.1.1/2 AND PICS 6.2.1/1 AND NOT PICS 6.2.1/4 Test Purpose name Sending of BICC COT Test Purpose If the IAM has already been sent, the Continuity message shall be sent indicating "continuity check successful", when all of the following conditions have been met: • the requested preconditions (if any) in the IMS network have been met • a possible outstanding continuity check procedure is successfully performed on the outgoing circuit ISUP Parameter values IAM: Nature of connection indicator = "COT to be expected" COT continuity indicator: Continuity check successful; SIP Parameter values INVITE: Require: precondition SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 183 Session Progress PRACK 200 OK (PRACK) UPDATE COT 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 38
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.1.3 Sending of SAM	TP number TP_103_001 Reference 7.2.3.1.3A.2 TSS reference SIP-ISUP/Basic call/Sending_of_SAM/ Selection criteria PICS 6.2.3/1 Test Purpose name Receipt of INFO request, sending of SAM Test Purpose Ensure that on receipt of an INVITE request containing a Supported: 100rel or Required: 100rel a 183 Session Progress is sent indicating the overlap capability in the Supported: 100rel or Required: 100rel After the ISUP IAM message has been sent the I-MGCF receives additional digits. The additional digits are received in in-dialog SIP INFO requests ISUP Parameter values SIP Parameter values INVITE: Supported: 100rel 183 Session Progress: Supported: 100rel or Required: 100rel INFO: Content-Type: application/x-session-info SubsequentDigit: <additional digits> Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 183 Session Progress INFO SAM 200 OK (INFO) INFO SAM 200 OK (INFO) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 39 TP number TP_103_002 Reference 7.2.3.1.3A.3 TSS reference SIP-ISUP/Basic call/Sending_of_SAM/ Selection criteria PICS 6.2.3/2 Test Purpose name Receipt of multiple INVITE request, sending of SAM Test Purpose After the ISUP IAM message has been sent the I-MGCF receives additional digits. The additional digits are received in multiple SIP INVITE requests ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE(1) IAM CASE A INVITE(2) SAM 484 Address Incomplete(1) ACK INVITE(3) SAM 484 Address Incomplete(2) ACK 180 Ringing(3) ACM CASE B 484 Address Incomplete(1) ACK INVITE(2) SAM 484 Address Incomplete(2) ACK INVITE(3) SAM 180 Ringing(3) ACM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 40 TP number TP_103_003 Reference 7.2.3.1.3A.3 TSS reference SIP-ISUP/Basic call/Sending_of_SAM/ Selection criteria PICS 6.2.3/2 Test Purpose name Receipt of multiple INVITE request, unsuccessful Test Purpose After the ISUP IAM message has been sent the I-MGCF receives additional digits. The additional digits are received in multiple SIP INVITE requests. If the number of digits contained in the Request line is equal or less than the number of digits already received for the communication, then the SUT shall immediately send a 484 Address Incomplete response for this INVITE. In this case, no SAM shall be sent to BICC/ISUP procedures ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE(1) IAM CASE A INVITE(2) 484 Address Incomplete(1) ACK CASE B 484 Address Incomplete(1) ACK INVITE(2) 484 Address Incomplete(2) ACK Apply post test routine
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.1.4 Sending of 18x provisional responses	TP number TP_104_001 Reference 7.2.3.1.4 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria Test Purpose name Sending of 180 Ringing after ACM was received Test Purpose The SUT shall send the SIP 180 Ringing when receiving the following messages: - ACM with Called party's status indicator set to subscriber free ISUP Parameter values ACM: BCI Called party status indicator = subscriber free SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 41 TP number TP_104_002 Reference 7.2.3.1.4 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria Test Purpose name Sending of 180 Ringing after CPG was received Test Purpose The SUT shall send the SIP 180 Ringing when receiving the following messages: - CPG with Event indicator set to ALERTING. ISUP Parameter values ACM: BCI Called party status indicator = no indication CPG: Event indicator = ALERTING SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying ACM(no indication) 180 Ringing CPG(ALERTING) Apply post test routine TP number TP_104_003 Reference 7.2.3.1.4 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/9 Test Purpose name ACM received, P-Earl-Media header present in 180 Test Purpose Ensure that on receipt of an ACM free a 180 Ringing is sent. In the 180 Ringing a P-Early-Media header is present indicating authorization of early media ISUP Parameter values IAM: 3,1 kHz audio ACM: BCI Called party status indicator = free SIP Parameter values INVITE: Supported: 100rel P-Early-Media: supported 180 ringing P-Early-Media: < authorization of early media> Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM(free) PRACK 200 OK (PRACK) Apply post test routine TP number TP_104_004 Reference 7.2.3.1.4 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/10 Test Purpose name Provide media in a Call-Info header field, or an Alert-Info header field in a 180 Test Purpose Ensure that the SUT is able to provide media instead of the in-band media received from the PSTN in a Call-Info header field, or an Alert-Info header field present in a 180 Ringing ISUP Parameter values ACM: BCI Called party status indicator = subscriber free SIP Parameter values 180: Call-Info: <Media resource>; or Alert-Info: <Media resource> Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 42 TP number TP_104_005 Reference 7.2.3.1.4A TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/10 Test Purpose name Provide media in a Call-Info header field, or an Alert-Info header field in a 183 Test Purpose Ensure that the SUT is able to provide media instead of the in-band media received from the PSTN in a Call-Info header field, or an Alert-Info header field present in a 183 Session Progress ISUP Parameter values ACM: BCI Called party status indicator = no indication SIP Parameter values 183: Call-Info: <Media resource>; or Alert-Info: <Media resource> Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 183 Session Progress ACM(no indication) Apply post test routine TP number TP_104_006 Reference 7.2.3.1.4 table 7a.0f TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Progress Indicator received in a ACM/CPG Test Purpose Ensure that on receipt of an ACM called party status subscriber free or a CPG event indicator ALERTING, a 180 Ringing is sent. The Progress Indicator IE contained in the ACM or CPG ATP parameter is mapped into the PSTN XML element in the 180 as indicated in table 6.1.1.4-2. • Progress Indicator received in an ACM called party status subscriber free 180 Ringing is sent in the PSTN XML element contains the ProgressIndicator value PI_value • Progress Indicator received in an CPG Event indicator ALERTING 180 Ringing is sent in the PSTN XML element contains the ProgressIndicator value PI_value ISUP Parameter values ACM: CASE A BCi Called party status = subscriber free ATP contains a Progress Indicator IE CASE B BCi Called party status = no indication oBCi 'inband info available' CPG: ATP contains a Progress Indicator IE SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet3 CodingStandard>00< Location<yyyy> ProgressOctet4 ProgressDescription>PI_value< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM CASE B 183 Session Progress ACM 180 Ringing CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 43 TP number TP_104_007 Reference 7.2.3.1.4 table 7a.0f TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of High layer compatibility received in a ACM/CPG Test Purpose Ensure that on receipt of an ACM called party status subscriber free or a CPG event indicator ALERTING, a 180 Ringing is sent. The High layer compatibility IE contained in the ACM or CPG ATP parameter is mapped into the HighLayerCompatibility PSTN XML element in the 180 as indicated in table 6.1.1.4-3. • High layer compatibility received in an ACM called party status subscriber free 180 Ringing is sent in the PSTN XML element contains the HighLayerCompatibility value HLC_value • High layer compatibility received in an CPG Event indicator ALERTING 180 Ringing is sent in the PSTN XML element contains the HighLayerCompatibility value HLC_value ISUP Parameter values ACM: CASE A BCi Called party status = subscriber free ATP contains a High layer compatibility IE CASE B BCi Called party status = no indication oBCi 'inband info available' CPG: ATP contains a High layer compatibility IE SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_value< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM CASE B 183 Session Progress ACM 180 Ringing CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 44 TP number TP_104_008 Reference 7.2.3.1.4 table 7a.0f TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Low layer compatibility received in a ACM/CPG Test Purpose Ensure that on receipt of an ACM called party status subscriber free or a CPG event indicator ALERTING, a 180 Ringing is sent. The Low layer compatibility IE contained in the ACM or CPG ATP parameter is mapped into the LowLayerCompatibility PSTN XML element in the 180 as indicated in table 6.1.1.4-4. • Low layer compatibility received in an ACM called party status subscriber free 180 Ringing is sent in the PSTN XML element contains the LowLayerCompatibility value ITC_value • Low layer compatibility received in an CPG Event indicator ALERTING 180 Ringing is sent in the PSTN XML element contains the LowLayerCompatibility value ITC_value ISUP Parameter values ACM: CASE A BCi Called party status = subscriber free ATP contains a Low layer compatibility IE CASE B BCi Called party status = no indication oBCi 'inband info available' CPG: ATP contains a Low layer compatibility IE SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN LowLayerCompatibility> LLOctet3> CodingStandard>00< InformationTransferCapability>ITC_value< LLOctet4> TransferMode>00< InformationTransferRate>10000< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM CASE B 183 Session Progress ACM 180 Ringing CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 45 TP number TP_104_009 Reference 7.2.3.1.4 table 7a.0f TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Bearer Capability received in a ACM/CPG Test Purpose Ensure that on receipt of an ACM called party status subscriber free or a CPG event indicator ALERTING, a 180 Ringing is sent. The Bearer Capability IE contained in the ACM or CPG ATP parameter is mapped into the BearerCapability PSTN XML element in the 180 as indicated in table 6.1.1.4-5. • Bearer Capability received in an ACM called party status subscriber free 180 Ringing is sent in the PSTN XML element contains the BearerCapability value ITC_value • Bearer Capability received in an CPG Event indicator ALERTING 180 Ringing is sent in the PSTN XML element contains the BearerCapability value ITC_value ISUP Parameter values ACM: CASE A BCi Called party status = subscriber free ATP contains a Bearer Capability IE CASE B BCi Called party status = no indication oBCi 'inband info available' CPG: ATP contains a Bearer Capability IE SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>ITC_value< BCoctet4 TransferMode>00< InformationTransferRate>10000< BCoctet5> Layer1Identification>01< UserInfoLayer1Protocol>00011< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM CASE C 183 Session Progress ACM 180 Ringing CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 46 TP number TP_104_010 Reference 7.2.3.1.4 table 7a.0g TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Backward call indicator into PSTN XML ProgressIndicator element value 1 sent in 180 Test Purpose Ensure that on receipt of an ACM and the Backward call indicator ISDN User Part indicator is set to ISDN User Part not used all the way, a 180 Ringing is sent. A PSTN XML ProgressIndicator element is present the value is set to No 1 (Call is not end-to-end ISDN: "further progress information may be available in-band") ISUP Parameter values ACM: BCI ISDN User Part indicator = ISDN User Part not used all the way SIP Parameter values 180 Ringing <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000001< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM Apply post test routine TP number TP_104_011 Reference 7.2.3.1.4 table 7a.0g TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Backward call indicator into PSTN XML ProgressIndicator element value 2 sent in 180 Test Purpose Ensure that on receipt of an ACM and the Backward call indicator ISDN User Part indicator is set to ISDN User Part used all the way and ISDN access indicator = Terminating access non-ISDN, a 180 Ringing is sent. A PSTN XML ProgressIndicator element is present the value is set to No 2 (Destination address is non-ISDN) ISUP Parameter values ACM: BCI ISDN User Part indicator = ISDN User Part used all the way ISDN access indicator = Terminating access non-ISDN SIP Parameter values 180 Ringing <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000010< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 47 TP number TP_104_012 Reference 7.2.3.1.4 table 7a.0g TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Backward call indicator into PSTN XML ProgressIndicator element value 7 sent in 180 Test Purpose Ensure that on receipt of an ACM and the Backward call indicator ISDN User Part indicator is set to ISDN User Part used all the way and ISDN access indicator = Terminating access ISDN, a 180 Ringing is sent. A PSTN XML ProgressIndicator element is present the value is set to No 7 ISUP Parameter values ACM: BCI ISDN User Part indicator = ISDN User Part used all the way ISDN access indicator = Terminating access ISDN SIP Parameter values 180 Ringing <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000111< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM Apply post test routine TP number TP_104_013 Reference 7.2.3.1.4 table 7a.0g TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of optional Backward call indicator into PSTN XML ProgressIndicator element value 8 sent in 180 Test Purpose Ensure that on receipt of an ACM and the optional Backward call indicator In-band information indicator in-band information or an appropriate pattern is now available, a 180 Ringing is sent. A PSTN XML ProgressIndicator element is present the value is set to No 8 ISUP Parameter values ACM: oBCI In-band information indicator in-band information or an appropriate pattern is now available SIP Parameter values 180 Ringing <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0001000< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 48 TP number TP_104_014 Reference 7.2.3.1.4 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name The SUT performs Fall back Test Purpose Ensure that on receipt of an INVITE request and the subsequent ISUP/BICC network is not able to perform Fall back, Fall back is performed in the SUT: The TMR in the sent IAM is set to 'speech' or '3,1 kHz audio' USI is copied from the first BearerCapability element received in the PSTN XML. Upon an ACM is received a 180 Ringing is sent ISUP Parameter values SIP Parameter values INVITE: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>00000< or InformationTransferCapability>10000< …. BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>10001< …. 180 Ringing <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000101< BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>00000< or InformationTransferCapability>10000< …. Comments Fallback is performed in the SUT Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 49 TP number TP_104_015 Reference 7.2.3.1.4 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Receipt of TMU speech, no BC present in ATP Test Purpose Ensure that on receipt of a Transmission medium used parameter set to speech in the ACM, a 180 Ringing is sent and a PSTN XML BearerCapability element is present the InformationTransferCapability is set to Speech ISUP Parameter values ACM: Transmission medium used = speech SIP Parameter values 180 Ringing <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>00000< … Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM Apply post test routine TP number TP_104_016 Reference 7.2.3.1.4 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Receipt of TMU 3,1 kHz audio, no BC present in ATP Test Purpose Ensure that on receipt of a Transmission medium used parameter set to 3,1 kHz audio in the ACM, a 180 Ringing is sent and a PSTN XML BearerCapability element is present the InformationTransferCapability is set to 3,1 kHz audio ISUP Parameter values ACM: Transmission medium used = 3,1 kHz audio SIP Parameter values 180 Ringing <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>10000< … Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 50 TP number TP_104_017 Reference 7.2.3.1.4.1 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Receipt of TMU, BC present in ATP PSTN XML BearerCapability sent in 180 Test Purpose Ensure that on receipt of a Transmission medium used parameter and in the ATP a Bearer Capability IE in the ACM, a 180 Ringing is sent and a PSTN XML BearerCapability element is present the InformationTransferCapability is set as indicated in table 6.1.1.4-1 ISUP Parameter values ACM: Transmission medium used, ATP Bearer Capability IE SIP Parameter values 180 Ringing <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>ITC_value< … Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM Apply post test routine TP number TP_104_018 Reference 7.2.3.1.4.1 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Receipt of TMU, BC present in ATP PSTN XML BearerCapability sent in 183 Test Purpose Ensure that on receipt of a Transmission medium used parameter and in the ATP a Bearer Capability IE in the ACM, a 183 Session Progress is sent and a PSTN XML BearerCapability element is present the InformationTransferCapability is set as indicated in table 6.1.1.4-1 ISUP Parameter values ACM: Transmission medium used, ATP Bearer Capability IE BCi Called party status = no indication SIP Parameter values 183 Session Progress <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>ITC_value< … Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 183 Session Progress ACM Apply post test routine Table 6.1.1.4-1: Mapping of TMU and Bearer capability IE to PSTN XML BearerCapability ITC_value ← 180 Ringing or 183 Session Progress ←ACM/CPG ITC_value_VA_01 PSTN XML BearerCapability = "Speech" TMU "Speech" ATP BC "speech" ITC_value_VA_02 PSTN XML BearerCapability = "Speech" TMU "3,1 kHz audio" ATP BC "speech" ITC_value_VA_03 PSTN XML BearerCapability = "3,1 kHz audio" TMU "Speech " ATP BC "3,1 kHz audio" ITC_value_VA_04 PSTN XML BearerCapability = "3,1 kHz audio" TMU "3,1 kHz audio" ATP BC "3,1 kHz audio" ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 51 TP number TP_104_019 Reference 7.2.3.1.4A TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria NOT PICS 6.2.1/5 AND NOT PICS 6.2.1/9 Test Purpose name ACM no indication received, no SIP response is sent Test Purpose Ensure that on receipt of an early ACM no SIP response is sent if the INVITE does not contain a P-Early-Media header ISUP Parameter values IAM: 3,1 kHz audio ACM: BCI Called party status indicator = no indication SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM ACM(no indication) Apply post test routine TP number TP_104_020 Reference 7.2.3.1.4A TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/9 Test Purpose name ACM received, P-Earl-Media header present in 183 Test Purpose Ensure that on receipt of an early ACM 183 Session Progress is sent. In the 183 session Progress a P-Early-Media header is present indicating authorization of early media ISUP Parameter values IAM: 3,1 kHz audio ACM: BCI Called party status indicator = no indication SIP Parameter values INVITE: P-Early-Media: supported 183 Session Progress P-Early-Media: < authorization of early media> Comments Message flows Mg MGCF ISUP INVITE IAM 183 Session Progress ACM(no indication) Apply post test routine TP number TP_104_021 Reference 7.2.3.1.4A table 7.2.3.1.4A.1 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/9 Test Purpose name CPG received, P-Earl-Media header present in 183 Test Purpose Ensure that on receipt of CPG and the Event indicator is set to ‘In-band info or an appropriate pattern is now available’ a 183 Session Progress is sent. In the 183 session Progress a P-Early-Media header is present indicating authorization of early media ISUP Parameter values IAM: 3,1 kHz audio CPG: Event indicator In-band info or an appropriate pattern is now available SIP Parameter values INVITE: P-Early-Media: supported 183 Session Progress P-Early-Media: < authorization of early media> Comments Message flows Mg MGCF ISUP INVITE IAM 183 Session Progress CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 52 TP number TP_104_022 Reference 7.2.3.1.4A table 7.2.3.1.4A.1 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name ACM Mapping of optional Backward call indicator into PSTN XML ProgressIndicator element value 8 sent in a 183 Test Purpose Ensure that on receipt of an ACM and the optional Backward call indicator In-band information indicator in-band information or an appropriate pattern is now available, a 183 Session Progress is sent. A PSTN XML ProgressIndicator element is present the value is set to No 8 ISUP Parameter values ACM: BCi ISDN access indicator = Terminating access ISDN BCi Called party status indicator = no indication oBCI In-band information indicator in-band information or an appropriate pattern is now available SIP Parameter values 183 Session Progress <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0001000< Comments Message flows Mg MGCF ISUP INVITE IAM 183 Session Progress ACM Apply post test routine TP number TP_104_023 Reference 7.2.3.1.4A table 7.2.3.1.4A.1 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name ACM Mapping of Backward call indicator into PSTN XML ProgressIndicator element value 1 sent in a 183 Test Purpose Ensure that on receipt of an ACM and the Backward call indicator ISDN User Part indicator is set to ISDN User Part not used all the way, a 183 Session Progress is sent. A PSTN XML ProgressIndicator element is present the value is set to No 1 (Call is not end-to-end ISDN: "further progress information may be available in-band") ISUP Parameter values ACM: BCI ISDN User Part indicator = ISDN User Part not used all the way BCi Called party status indicator = no indication SIP Parameter values 183 Session Progress <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000001< Comments Message flows Mg MGCF ISUP INVITE IAM 183 Session Progress ACM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 53 TP number TP_104_024 Reference 7.2.3.1.4A table 7.2.3.1.4A.1 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name ACM Mapping of Backward call indicator into PSTN XML ProgressIndicator element value 2 sent in a 183 Test Purpose Ensure that on receipt of an ACM and the Backward call indicator ISDN User Part indicator is set to ISDN User Part used all the way and ISDN access indicator = Terminating access non-ISDN, a 183 Session Progress is sent. A PSTN XML ProgressIndicator element is present the value is set to No 2 (Destination address is non-ISDN) ISUP Parameter values ACM: BCI ISDN User Part indicator = ISDN User Part used all the way BCi ISDN access indicator = Terminating access non-ISDN BCi Called party status indicator = no indication SIP Parameter values 183 Session Progress <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000010< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 183 Session Progress ACM Apply post test routine TP number TP_104_025 Reference 7.2.3.1.4A table 7.2.3.1.4A.1 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name ACM Mapping of Backward call indicator into PSTN XML ProgressIndicator element value 7 sent in a 183 Test Purpose Ensure that on receipt of an ACM and the Backward call indicator ISDN User Part indicator is set to ISDN User Part used all the way and ISDN access indicator = Terminating access ISDN, a 183 Session Progress is sent. A PSTN XML ProgressIndicator element is present the value is set to No 7 ISUP Parameter values ACM: BCI ISDN User Part indicator = ISDN User Part used all the way BCi ISDN access indicator = Terminating access ISDN BCi Called party status indicator = no indication SIP Parameter values 183 Session Progress <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000111< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 183 Session Progress ACM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 54 TP number TP_104_026 Reference 7.2.3.1.4A table 7.2.3.1.4A.2 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name CPG Mapping of optional Backward call indicator into PSTN XML ProgressIndicator element value 8 sent in a 183 Test Purpose Ensure that on receipt of a CPG and the optional Backward call indicator In-band information indicator in-band information or an appropriate pattern is now available, a 183 Session Progress is sent. A PSTN XML ProgressIndicator element is present the value is set to No 8 ISUP Parameter values CPG: Event indicator = Progress oBCI In-band information indicator in-band information or an appropriate pattern is now available SIP Parameter values 183 Session Progress <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0001000< Comments Message flows Mg MGCF ISUP INVITE IAM ACM 183 Session Progress CPG Apply post test routine TP number TP_104_027 Reference 7.2.3.1.4A table 7.2.3.1.4A.2 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name CPG Mapping of Backward call indicator into PSTN XML ProgressIndicator element value 1 sent in a 183 Test Purpose Ensure that on receipt of a CPG and the Backward call indicator ISDN User Part indicator is set to ISDN User Part not used all the way, a 183 Session Progress is sent. A PSTN XML ProgressIndicator element is present the value is set to No 1 (Call is not end-to-end ISDN: "further progress information may be available in-band") ISUP Parameter values CPG: Event indicator = Progress BCI ISDN User Part indicator = ISDN User Part not used all the way SIP Parameter values 183 Session Progress <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000001< Comments Message flows Mg MGCF ISUP INVITE IAM ACM 183 Session Progress CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 55 TP number TP_104_028 Reference 7.2.3.1.4A table 7.2.3.1.4A.2 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name CPG Mapping of Backward call indicator into PSTN XML ProgressIndicator element value 2 sent in a 183 Test Purpose Ensure that on receipt of an CPG (Progress) and the Backward call indicator ISDN User Part indicator is set to ISDN User Part used all the way and ISDN access indicator = Terminating access non-ISDN, a 183 Session Progress is sent. A PSTN XML ProgressIndicator element is present the value is set to No 2 (Destination address is non- ISDN) ISUP Parameter values CPG: Event indicator = Progress BCI ISDN User Part indicator = ISDN User Part used all the way BCi ISDN access indicator = Terminating access non-ISDN SIP Parameter values 183 Session Progress <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000010< Comments Message flows Mg MGCF ISUP INVITE IAM ACM 183 Session Progress CPG Apply post test routine TP number TP_104_029 Reference 7.2.3.1.4A table 7.2.3.1.4A.2 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name CPG Mapping of Backward call indicator into PSTN XML ProgressIndicator element value 7 sent in a 183 Test Purpose Ensure that on receipt of an CPG (Progress) and the Backward call indicator ISDN User Part indicator is set to ISDN User Part used all the way and ISDN access indicator = Terminating access ISDN, a 183 Session Progress is sent. A PSTN XML ProgressIndicator element is present the value is set to No 7 ISUP Parameter values CPG: Event indicator = Progress BCI ISDN User Part indicator = ISDN User Part used all the way BCi ISDN access indicator = Terminating access ISDN SIP Parameter values 183 Session Progress <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000111< Comments Message flows Mg MGCF ISUP INVITE IAM ACM 183 Session Progress CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 56 TP number TP_104_030 Reference 7.2.3.1.4A TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name CPG Mapping of CPG Event information ‘in-band info or appropriate pattern is now available’ sent in a 183 Test Purpose Ensure that on receipt of a CPG and the Event information is set to "in-band information or an appropriate pattern is now available", a 183 Session Progress is sent. A P-Early-Media header is present indicating authorization of early media. ISUP Parameter values CPG: Event indicator = in-band information or an appropriate pattern is now available SIP Parameter values 183 Session Progress P-Early-Media: < authorization of early media> Comments Message flows Mg MGCF ISUP INVITE IAM ACM 183 Session Progress CPG Apply post test routine TP number TP_104_031 Reference 7.2.3.1.4A table 7.2.3.1.4A.2 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Backward call indicator into PSTN XML ProgressIndicator element value 2 sent in a 183 Test Purpose Ensure that on receipt of an CPG (in-band information or an appropriate pattern is now available) and the Backward call indicator ISDN User Part indicator is set to ISDN User Part used all the way and ISDN access indicator = Terminating access non-ISDN, a 183 Session Progress is sent. A PSTN XML ProgressIndicator element is present the value is set to No 2 (Destination address is non-ISDN) ISUP Parameter values CPG: Event indicator = in-band information or an appropriate pattern is now available BCI ISDN User Part indicator = ISDN User Part used all the way BCi ISDN access indicator = Terminating access non-ISDN SIP Parameter values 183 Session Progress <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000010< Comments Message flows Mg MGCF ISUP INVITE IAM ACM 183 Session Progress CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 57 TP number TP_104_032 Reference 7.2.3.1.4A table 7.2.3.1.4A.2 TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Backward call indicator into PSTN XML ProgressIndicator element value 7 sent in a 183 Test Purpose Ensure that on receipt of an CPG (in-band information or an appropriate pattern is now available) and the Backward call indicator ISDN User Part indicator is set to ISDN User Part used all the way and ISDN access indicator = Terminating access ISDN, a 183 Session Progress is sent. A PSTN XML ProgressIndicator element is present the value is set to No 7 ISUP Parameter values CPG: Event indicator = in-band information or an appropriate pattern is now available BCI ISDN User Part indicator = ISDN User Part used all the way BCi ISDN access indicator = Terminating access ISDN SIP Parameter values 183 Session Progress <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000111< Comments Message flows Mg MGCF ISUP INVITE IAM ACM 183 Session Progress CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 58 TP number TP_104_033 Reference 7.2.3.1.4 table 7a.0f TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Progress Indicator received in a ACM/CPG into 183 Test Purpose Ensure that on receipt of an ACM called party status no indication or CPG, a 183 Session Progress is sent. The Progress Indicator IE contained in the ACM ATP parameter is mapped into the PSTN XML element in the 183 Session Progress as indicated in table 6.1.1.4-2. • Progress Indicator received in an ACM called party status no indication, a 183 Session Progress is sent in the PSTN XML element contains the ProgressIndicator value PI_value • Progress Indicator received in an CPG a 183 Session Progress is sent the PSTN XML element contains the ProgressIndicator value PI_value ISUP Parameter values ACM: CASE A BCi Called party status = no indication ATP contains a Progress Indicator IE CASE B BCi Called party status = no indication oBCi 'inband info available' CPG: ATP contains a Progress Indicator IE SIP Parameter values 183 Session Progress: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet3 CodingStandard>00< Location>yyyy< ProgressOctet4 ProgressDescription>PI_value< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 183 Session Progress ACM CASE B ACM 183 Session Progress CPG Apply post test routine Table 6.1.1.4-2: Mapping of Progress Indicator information element to PSTN XML ProgressIndicator PI_value ATP Progress Indicator value XML ProgressIndicator ProgressDescription PI_VA_1 Call is not end-to-end ISDN; further call progress information may be available in-band '0000001' PI_VA_2 Destination address is non-ISDN '0000010' PI_VA_3 Origination address is non-ISDN '0000011' PI_VA_4 Call has returned to the ISDN '0000100' PI_VA_5 Interworking has occurred and has resulted in a telecommunication service change '0000101' PI_VA_6 In-band information or an appropriate pattern is now available '0001000' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 59 TP number TP_104_034 Reference 7.2.3.1.4 table 7a.0f TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of High layer compatibility received in a ACM/CPG into 183 Test Purpose Ensure that on receipt of an ACM called party status no indication or CPG, a 183 Session Progress is sent. The High layer compatibility IE contained in the ACM ATP parameter is mapped into the HighLayerCompatibility PSTN XML element in the 183 Session Progress as indicated in table 6.1.1.4-3. • High layer compatibility received in an ACM called party status no indication, a 183 Session Progress is sent in the PSTN XML element contains the HighLayerCompatibility value HLC_value • High layer compatibility received in an CPG a 183 Session Progress is sent the PSTN XML element contains the HighLayerCompatibility value HLC_value ISUP Parameter values ACM: CASE A BCi Called party status = no indication CASE B BCi Called party status = no indication oBCi 'inband info available' CPG: ATP contains a High layer compatibility IE SIP Parameter values 183 Session Progress: <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_value< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 183 Session Progress ACM CASE B ACM 183 Session Progress CPG Apply post test routine Table 6.1.1.4-3: Mapping of High layer compatibility information element to PSTN XML HighLayerCharacteristic HLC_value DSS1 High layer characteristics identification XML HighLayerCharacteristic HLC_VA_1 Telephony '0000001' HLC_VA_2 Facsimile Group 2/3 '0000100' HLC_VA_3 Facsimile Group 4 Class I '0100001' HLC_VA_4 Facsimile service Group 4, Classes II and III '0100100' HLC_VA_5 Syntax based Videotex '0110010' HLC_VA_6 International Videotex interworking via gateways or interworking units '0110011' HLC_VA_7 Telex service '0110101' HLC_VA_8 FTAM application '1000010' HLC_VA_9 Videotelephony '1100000' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 60 TP number TP_104_035 Reference 7.2.3.1.4 table 7a.0f TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Low layer compatibility received in a ACM/CPG into 183 Test Purpose Ensure that on receipt of an ACM called party status no indication or CPG, a 183 Session Progress is sent. The Low layer compatibility IE contained in the ACM ATP parameter is mapped into the LowLayerCompatibility PSTN XML element in the 183 Session Progress as indicated in table 6.1.1.4-4. • Low layer compatibility received in an ACM called party status no indication, a 183 Session Progress is sent in the PSTN XML element contains the LowLayerCompatibility value ITC_value • Low layer compatibility received in an CPG a 183 Session Progress is sent the PSTN XML element contains the LowLayerCompatibility value ITC_value ISUP Parameter values ACM: CASE A BCi Called party status = no indication CASE B BCi Called party status = no indication oBCi 'inband info available' CPG: ATP contains a Low layer compatibility IE SIP Parameter values 183 Session Progress: <?xml version="1.0" encoding="utf-8"?> PSTN LowLayerCompatibility> LLOctet3> CodingStandard>00< InformationTransferCapability>ITC_value< LLOctet4> TransferMode>00< InformationTransferRate>10000< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 183 Session Progress ACM CASE B ACM 183 Session Progress CPG Apply post test routine Table 6.1.1.4-4: Mapping of Low Layer Compatibility to PSTN XML LowLayerCompatibility ITC_value LLC Information transfer capability XML LLC InformationTransferCapability ITC_VA_1 Speech '00000' ITC_VA_2 3,1 kHz audio '10000' ITC_VA_3 Unrestricted digital info '01001' ITC_VA_3 7 kHz audio '10001' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 61 TP number TP_104_036 Reference 7.2.3.1.4 table 7a.0f TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Bearer Capability received in a ACM/CPG into 183 Test Purpose Ensure that on receipt of an ACM called party status no indication or CPG, a 183 Session Progress is sent. The Bearer Capability IE contained in the ACM ATP parameter is mapped into the BearerCapability PSTN XML element in the 183 Session Progress as indicated in table 6.1.1.4-5. • Bearer Capability received in an ACM called party status subscriber free 183 Session Progress is sent in the PSTN XML element contains the BearerCapability value ITC_value • Bearer Capability received in an CPG a 183 Session Progress is sent in the PSTN XML element contains the BearerCapability value ITC_value ISUP Parameter values ACM: CASE A BCi Called party status = no indication CASE B BCi Called party status = no indication oBCi 'inband info available' CPG: ATP contains a Bearer Capability IE SIP Parameter values 183 Session Progress: <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>ITC_value< BCoctet4 TransferMode>00< InformationTransferRate>10000< BCoctet5> Layer1Identification>01< UserInfoLayer1Protocol>00011< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 183 Session Progress ACM CASE B ACM 183 Session Progress CPG Apply post test routine Table 6.1.1.4-5: Mapping of Bearer capability to PSTN XML BearerCapability ITC_value BC Information transfer capability XML InformationTransferCapability ITC_VA_1 Speech '00000' ITC_VA_2 3,1 kHz audio '10000' ITC_VA_3 Unrestricted digital inf. W/tone/ann '10001' ITC_VA_4 Unrestricted digital information '01000' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 62 TP number TP_104_037 Reference 7.2.3.1.4B TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria Test Purpose name ACM containing CDIV information, a 181 is sent Test Purpose Ensure that on receipt of an ACM containing a Redirection number, Call diversion information and Generic notification set to 'Call is diverted', a 181 Call Is Being Forwarded is sent ISUP Parameter values ACM: BCi Called party status = no indication Redirection number Call diversion information Generic notification = 'Call is diverted' SIP Parameter values 181 Call Is Being Forwarded Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 181 Call Is Being Forwarded ACM Apply post test routine TP number TP_104_038 Reference 7.2.3.1.4B TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/9 Test Purpose name ACM containing CDIV information and oBCi inband inf available, a 181 is sent a P-Early-Media present Test Purpose Ensure that on receipt of a ACM containing a Redirection number, Call diversion information and Generic notification set to 'Call is diverted' and an optional backward call indicator set to In-band info or an appropriate pattern is now available, a 181 Call Is Being Forwarded is sent, a P-Early-Media is present indicating authorization of early media ISUP Parameter values ACM: BCi Called party status = no indication Redirection number Call diversion information Generic notification = 'Call is diverted' SIP Parameter values 181 Call Is Being Forwarded P-Early-Media: <indicating authorization of early media> Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 181 Call Is Being Forwarded ACM Apply post test routine TP number TP_104_040 Reference 7.2.3.1.4B TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria Test Purpose name CPG containing CDIV information, a 181 is sent Test Purpose Ensure that on receipt of a CPG Event Indicator set to Progress containing a Redirection number, Call diversion information and Generic notification set to 'Call is diverted', a 181 Call Is Being Forwarded is sent ISUP Parameter values CPG: Event Indicator set to Progress Redirection number Call diversion information Generic notification = 'Call is diverted' oBCI In-band information indicator in-band information or an appropriate pattern is now available SIP Parameter values 181 Call Is Being Forwarded Comments Message flows Mg MGCF ISUP INVITE IAM 180/183 ACM 181 Call Is Being Forwarded CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 63 TP number TP_104_041 Reference 7.2.3.1.4B TSS reference SIP-ISUP/Basic call/Sending_of_18x/ Selection criteria PICS 6.2.1/9 Test Purpose name ACM containing CDIV information and oBCi inband inf available, a 181 is sent a P-Early-Media present Test Purpose Ensure that on receipt of a CPG Event Indicator set to Progress containing a Redirection number, Call diversion information and Generic notification set to 'Call is diverted' and an optional backward call indicator set to In-band info or an appropriate pattern is now available, a 181 Call Is Being Forwarded is sent, a P-Early-Media is present indicating authorization of early media ISUP Parameter values CPG: Event Indicator set to Progress Redirection number Call diversion information Generic notification = 'Call is diverted' SIP Parameter values INVITE: Supported: 100rel P-Early-Media: < authorization of early media> 181 Call Is Being Forwarded P-Early-Media: <indicating authorization of early media> Comments Message flows Mg MGCF ISUP INVITE IAM 180/183 ACM 181 Call Is Being Forwarded CPG Apply post test routine
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.1.5 Sending of the 200 OK (INVITE)	TP number TP_105_001 Reference 7.2.3.1.5 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria Test Purpose name An ANM is received a 200 OK is sent Test Purpose Ensure that on receipt of an ANM the SUT sends a 200 OK INVITE ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK Apply post test routine TP number TP_105_002 Reference 7.2.3.1.5 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria Test Purpose name A CON is received a 200 OK is sent Test Purpose Ensure that on receipt of a CON the SUT sends a 200 OK INVITE ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 200 OK (INVITE) CON ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 64 TP number TP_105_003 Reference 7.2.3.1.5 table 7.2.3.1.5.1 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria PICS 6.2.1/5 Test Purpose name Progress indicator received in ANM/CON is mapped into PSTN XML ProgressIndicator Test Purpose Ensure that on receipt of an ANM/CON and an ATP containing a Progress indicator IE set to value PI_value a, 200 OK INVITE is sent. the PSTN XML ProgressIndicator value is set as indicated in table 6.1.1.5-1 ISUP Parameter values ANM/CON: ATP contains a Progress Indicator IE value PI_value SIP Parameter values 200 OK INVITE: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet3 CodingStandard>00< Location<yyyy> ProgressOctet4 ProgressDescription>PI_value< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine Table 6.1.1.5-1: Mapping of Progress Indicator information element to PSTN XML ProgressIndicator PI_value ATP Progress Indicator value XML ProgressIndicator ProgressDescription PI_VA_1 Call is not end-to-end ISDN; further call progress information may be available in-band '0000001' PI_VA_2 Destination address is non-ISDN '0000010' PI_VA_3 Origination address is non-ISDN '0000011' PI_VA_4 Call has returned to the ISDN '0000100' PI_VA_5 Interworking has occurred and has resulted in a telecommunication service change '0000101' PI_VA_6 In-band information or an appropriate pattern is now available '0001000' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 65 TP number TP_105_004 Reference 7.2.3.1.5 table 7.2.3.1.5.1 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria PICS 6.2.1/5 Test Purpose name High layer compatibility received in ANM/CON is mapped into PSTN XML HighLayerCompatibility Test Purpose Ensure that on receipt of an ANM/CON and an ATP containing a High layer compatibility IE set to value HLC_value, a 200 OK INVITE is sent. the PSTN XML HighLayerCompatibility value is set as indicated in table 6.1.1.5-2 ISUP Parameter values ANM/CON: ATP contains a High layer compatibility IE value HLC_value SIP Parameter values 200 OK INVITE: <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_value< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine Table 6.1.1.5-2: Mapping of High layer compatibility information element to PSTN XML HighLayerCharacteristic HLC_value DSS1 High layer characteristics identification XML HighLayerCharacteristic HLC_VA_1 Telephony '0000001' HLC_VA_2 Facsimile Group 2/3 '0000100' HLC_VA_3 Facsimile Group 4 Class I '0100001' HLC_VA_4 Facsimile service Group 4, Classes II and III '0100100' HLC_VA_5 Syntax based Videotex '0110010' HLC_VA_6 International Videotex interworking via gateways or interworking units '0110011' HLC_VA_7 Telex service '0110101' HLC_VA_8 FTAM application '1000010' HLC_VA_9 Videotelephony '1100000' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 66 TP number TP_105_005 Reference 7.2.3.1.5 table 7.2.3.1.5.1 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria PICS 6.2.1/5 Test Purpose name Low layer compatibility received in ANM/CON is mapped into PSTN XML LowLayerCompatibility Test Purpose Ensure that on receipt of an ANM/CON and an ATP containing a Low layer compatibility IE set to value ITC_value, a 200 OK INVITE is sent. the PSTN XML LowLayerCompatibility value is set as indicated in table 6.1.1.5-3 ISUP Parameter values ANM/CON: ATP contains a Low layer compatibility IE value ITC_value SIP Parameter values 200 OK INVITE: <?xml version="1.0" encoding="utf-8"?> PSTN LowLayerCompatibility> LLOctet3> CodingStandard>00< InformationTransferCapability>ITC_value< LLOctet4> TransferMode>00< InformationTransferRate>10000< LLOctet5> Layer1Identification>01</ UserInfoLayer1Protocol>ITC_value</ Comments When the 'XML UserInfoLayer1Protocol' element is absent, the entire 'LLOctet5' element is absent Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine Table 6.1.1.5-3: Mapping of Low Layer Compatibility to PSTN XML LowLayerCompatibility ITC_value LLC Information transfer capability XML LLC InformationTransferCapability XML UserInfoLayer1Protocol ITC_VA_1 Speech '00000' '00011' ITC_VA_2 3,1 kHz audio '10000' '00011' ITC_VA_3 Unrestricted digital info '01000' absent ITC_VA_4 7 kHz audio '10001' '00110' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 67 TP number TP_105_006 Reference 7.2.3.1.5 table 7.2.3.1.5.1 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria PICS 6.2.1/5 Test Purpose name Bearer Capability received in ANM/CON is mapped into PSTN XML BearerCapability Test Purpose Ensure that on receipt of an ANM/CON and an ATP containing a Bearer Capability IE set to value ITC_value, a 200 OK INVITE is sent. the PSTN XML BearerCapability value is set as indicated in table 6.1.1.5-4 ISUP Parameter values ANM/CON: ATP contains a Bearer Capability IE value ITC_value SIP Parameter values 200 OK INVITE: <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>ITC_value< BCoctet4 TransferMode>00< InformationTransferRate>10000< BCoctet5> Layer1Identification>01< UserInfoLayer1Protocol>ITC_value< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine Table 6.1.1.5-4: Mapping of Bearer capability to PSTN XML BearerCapability ITC_value BC Information transfer capability XML InformationTransferCapability XML UserInfoLayer1Protocol ITC_VA_1 Speech '00000' '00011' ITC_VA_2 3,1 kHz audio '10000' '00011' ITC_VA_3 Unrestricted digital inf. W/tone/ann '10001' '00110' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 68 TP number TP_105_007 Reference 7.2.3.1.5 table 7.2.3.1.5.2 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria PICS 6.2.1/5 Test Purpose name Backward call indicator mapped into PSTN XML ProgressIndicator value 1 Test Purpose Ensure that on receipt of a ANM/CON and the backward call indicator is set to ISDN User Part not used all the way, a 200 OK INVITE is sent and the PSTN XML ProgressIndicator value is set to 1 (Call is not end-to-end ISDN: further progress information may be available in-band) ISUP Parameter values ANM/CON: BCi ISDN User Part indicator = ISDN User Part not used all the way SIP Parameter values 200 OK INVITE <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000001< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine TP number TP_105_008 Reference 7.2.3.1.5 table 7.2.3.1.5.2 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria PICS 6.2.1/5 Test Purpose name Backward call indicator mapped into PSTN XML ProgressIndicator value 2 Test Purpose Ensure that on receipt of a ANM/CON and the backward call indicator is set to ISDN User Part used all the way and Terminating access non-ISDN, a 200 OK INVITE is sent and the PSTN XML ProgressIndicator value is set to 2 (Destination address is non-ISDN) ISUP Parameter values ANM/CON: BCi ISDN User Part indicator = ISDN User Part used all the way ISDN access indicator = Terminating access non-ISDN SIP Parameter values 200 OK INVITE <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000010< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 69 TP number TP_105_009 Reference 7.2.3.1.5 table 7.2.3.1.5.2 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria PICS 6.2.1/5 Test Purpose name Backward call indicator mapped into PSTN XML ProgressIndicator value 7 Test Purpose Ensure that on receipt of a ANM/CON and the backward call indicator is set to ISDN User Part used all the way and Terminating access ISDN, a 200 OK INVITE is sent and the PSTN XML ProgressIndicator value is set to 7 ISUP Parameter values ANM/CON: BCi ISDN User Part indicator = ISDN User Part used all the way ISDN access indicator = Terminating access ISDN SIP Parameter values 200 OK INVITE <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0000111< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine TP number TP_105_010 Reference 7.2.3.1.5 table 7.2.3.1.5.2 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria PICS 6.2.1/5 Test Purpose name Optional backward call indicator mapped into PSTN XML ProgressIndicator value 8 Test Purpose Ensure that on receipt of a ANM/CON and the optional backward call indicator is to in- band information or an appropriate pattern is now available, a 200 OK INVITE is sent and the PSTN XML ProgressIndicator value is set to 8 (In-band information or appropriate pattern is now available) ISUP Parameter values ANM/CON: Optional backward call indicator In-band information indicator = in-band information or an appropriate pattern is now available SIP Parameter values 200 OK INVITE <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator … ProgressOctet4 ProgressDescription>0001000< Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 70 TP number TP_105_011 Reference 7.2.3.1.5 table 7.2.3.1.5.1 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria PICS 6.2.1/5 Test Purpose name Receipt of TMU speech in ANM/CON, no BC present in ATP Test Purpose Ensure that on receipt of a Transmission medium used parameter set to speech in the ANM/CON, a 200 OK INVITE is sent and a PSTN XML BearerCapability element is present the InformationTransferCapability is set to Speech ISUP Parameter values IAM: TMR = second InformationTransferCapability TMR prime = first InformationTransferCapability USI = first BearerCapability USI prime = second BearerCapability ANM/CON: Transmission medium used = speech SIP Parameter values INVITE: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>00000< …. BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>10001< …. 200 OK INVITE <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>00000< … Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 71 TP number TP_105_012 Reference 7.2.3.1.5 table 7.2.3.1.5.1 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria PICS 6.2.1/5 Test Purpose name Receipt of TMU 3,1 kHz audio in ANM/CON, no BC present in ATP Test Purpose Ensure that on receipt of a Transmission medium used parameter set to 3,1 kHz audio in the ANM/CON, a 200 OK INVITE is sent and a PSTN XML BearerCapability element is present the InformationTransferCapability is set to 3,1 kHz audio ISUP Parameter values IAM: TMR = second InformationTransferCapability TMR prime = first InformationTransferCapability USI = first BearerCapability USI prime = second BearerCapability ANM/CON: Transmission medium used = 3,1 kHz audio SIP Parameter values INVITE: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>10000< …. BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>10001< …. 200 OK INVITE <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>10000< … Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 72 TP number TP_105_013 Reference 7.2.3.1.5 TSS reference SIP-ISUP/Basic call/Sending_of_200_OK/ Selection criteria PICS 6.2.1/5 Test Purpose name Receipt of TMU, BC present in ATP PSTN XML BearerCapability sent in 200 OK Test Purpose Ensure that on receipt of a Transmission medium used parameter and in the ATP a Bearer Capability IE in the ANM/CON, a 200 OK INVITE is sent and a PSTN XML BearerCapability element is present the InformationTransferCapability is set as indicated in table 6.1.1.5-5 ISUP Parameter values IAM: TMR = second InformationTransferCapability TMR prime = first InformationTransferCapability USI = first BearerCapability USI prime = second BearerCapability ANM/CON: Transmission medium used, ATP Bearer Capability IE SIP Parameter values 200 OK INVITE <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>ITC_value< … Comments Message flows Mg MGCF ISUP INVITE IAM CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine Table 6.1.1.5-5: Mapping of TMU and Bearer capability IE to PSTN XML BearerCapability ITC_value ← 180 Ringing or 183 Session Progress ←ACM/CPG ITC_value_VA_01 PSTN XML BearerCapability = "Speech" TMU "Speech" ATP BC "speech" ITC_value_VA_02 PSTN XML BearerCapability = " Speech " TMU "3,1 kHz audio" ATP BC "speech" ITC_value_VA_03 PSTN XML BearerCapability = "3,1 kHz audio" TMU "Speech" ATP BC "3,1 kHz audio" ITC_value_VA_04 PSTN XML BearerCapability = "3,1 kHz audio" TMU "3,1 kHz audio" ATP BC "3,1 kHz audio" ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 73
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.1.6 Sending of the Release message (REL)	TP number TP_106_001 Reference 7.2.3.1.7 TSS reference SIP-ISUP/Basic call/Sending_of_REL/ Selection criteria Test Purpose name BYE received in confirmed dialogue no Reason header included, a REL is sent Test Purpose Ensure that on receipt of a BYE request in confirmed dialogue and no Reason header is present, a REL message is sent. The cause indicator is set to No. 16 (normal clearing), the location is set to 'network beyond interworking point' ISUP Parameter values REL: Cause indicator Cause Value = 16 (normal clearing) Location = network beyond interworking point SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK BYE REL 200 OK (BYE) RLC TP number TP_106_002 Reference 7.2.3.1.7 TSS reference SIP-ISUP/Basic call/Sending_of_REL/ Selection criteria Test Purpose name BYE received in confirmed dialogue Reason header included, a REL is sent Test Purpose Ensure that on receipt of a BYE request in confirmed dialogue and a Reason header is present, a REL message is sent. The cause indicator is set to the Reason header cause value, the location is set to 'network beyond interworking point' ISUP Parameter values REL: Cause indicator Cause Value = Cause_value Location = network beyond interworking point SIP Parameter values BYE: Reason: Q.850; cause = Cause_value Comments The Cause_value is a PIXIT parameter Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK BYE REL 200 OK (BYE) RLC ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 74 TP number TP_106_003 Reference 7.2.3.1.7 TSS reference SIP-ISUP/Basic call/Sending_of_REL/ Selection criteria Test Purpose name BYE received in early dialogue no Reason header included, a REL is sent Test Purpose Ensure that on receipt of a BYE request in early dialogue and no Reason header is present, a REL message is sent. The cause indicator is set to No. 16 (normal clearing), the location is set to 'network beyond interworking point' ISUP Parameter values REL: Cause indicator Cause Value = 16 (normal clearing) Location = network beyond interworking point SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 18x ACM BYE REL 200 OK (BYE) RLC 487 Request Terminated ACK TP number TP_106_004 Reference 7.2.3.1.7 TSS reference SIP-ISUP/Basic call/Sending_of_REL/ Selection criteria Test Purpose name BYE received in early dialogue Reason header included, a REL is sent Test Purpose Ensure that on receipt of a BYE request in early dialogue and a Reason header is present, a REL message is sent. The cause indicator is set to the Reason header cause value, the location is set to 'network beyond interworking point' ISUP Parameter values REL: Cause indicator Cause Value = Cause_value Location = network beyond interworking point SIP Parameter values BYE: Reason: Q.850; cause = Cause_value Comments The Cause_value is a PIXIT parameter Message flows Mg MGCF ISUP INVITE IAM 18x ACM BYE REL 200 OK (BYE) RLC 487 Request Terminated ACK TP number TP_106_005 Reference 7.2.3.1.7 TSS reference SIP-ISUP/Basic call/Sending_of_REL/ Selection criteria Test Purpose name CANCEL received in early dialogue no Reason header included, a REL is sent Test Purpose Ensure that on receipt of a CANCEL request in early dialogue and no Reason header is present, a REL message is sent. The cause indicator is set to No. 16 (normal clearing), the location is set to 'network beyond interworking point' ISUP Parameter values REL: Cause indicator Cause Value = 31 (normal unspecified) Location = network beyond interworking point SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 18x ACM CANCEL REL 200 OK (CANCEL) RLC 487 Request Terminated ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 75 TP number TP_106_006 Reference 7.2.3.1.7 TSS reference SIP-ISUP/Basic call/Sending_of_REL/ Selection criteria Test Purpose name CANCEL received in early dialogue Reason header included, a REL is sent Test Purpose Ensure that on receipt of a CANCEL request in early dialogue and a Reason header is present, a REL message is sent. The cause indicator is set to the Reason header cause value, the location is set to 'network beyond interworking point' ISUP Parameter values REL: Cause indicator Cause Value = Cause_value Location = network beyond interworking point SIP Parameter values CANCEL: Reason: Q.850 cause = Cause_value Comments The Cause_value is a PIXIT parameter Message flows Mg MGCF ISUP INVITE IAM 18x ACM CANCEL REL 200 OK (CANCEL) RLC 487 Request Terminated ACK TP number TP_106_007 Reference 7.2.3.1.7 TSS reference SIP-ISUP/Basic call/Sending_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name BYE received in confirmed dialogue PSTN XML HighLayerCompatibility present, a REL is sent containing a High layer compatibility IE Test Purpose Ensure that on receipt of a BYE request in confirmed dialogue and a PSTN XML HighLayerCompatibility is present, a REL is sent and an ATP is present containing a High layer compatibility IE. The value is mapped as indicated in table 6.1.1.6-1 ISUP Parameter values REL: ATP High layer compatibility High Layer Characteristic = HLC_value SIP Parameter values BYE: <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_value< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK BYE REL 200 OK (BYE) RLC ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 76 TP number TP_106_008 Reference 7.2.3.1.7 TSS reference SIP-ISUP/Basic call/Sending_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name BYE received in early dialogue PSTN XML HighLayerCompatibility present, a REL is sent containing a High layer compatibility IE Test Purpose Ensure that on receipt of a BYE request in early dialogue and a PSTN XML HighLayerCompatibility is present, a REL is sent and an ATP is present containing a High layer compatibility IE. The value is mapped as indicated in table 6.1.1.6-1 ISUP Parameter values REL: ATP High layer compatibility High Layer Characteristic = HLC_value SIP Parameter values BYE: <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_value< Comments Message flows Mg MGCF ISUP INVITE IAM BYE REL 200 OK (BYE) RLC 487 Request Terminated ACK TP number TP_106_009 Reference 7.2.3.1.7 TSS reference SIP-ISUP/Basic call/Sending_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name CANCEL received in early dialogue PSTN XML HighLayerCompatibility present, a REL is sent containing a High layer compatibility IE Test Purpose Ensure that on receipt of a CANCEL request in early dialogue and a PSTN XML HighLayerCompatibility is present, a REL is sent and an ATP is present containing a High layer compatibility IE. The value is mapped as indicated in table 6.1.1.6-1 ISUP Parameter values REL: ATP High layer compatibility High Layer Characteristic = HLC_value SIP Parameter values CANCEL <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_value< Comments Message flows Mg MGCF ISUP INVITE IAM CANCEL REL 200 OK (CANCEL) RLC 487 Request Terminated ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 77 Table 6.1.1.6-1: Mapping of High layer compatibility information element to PSTN XML HighLayerCharacteristic HLC_value DSS1 High layer characteristics identification XML HighLayerCharacteristic HLC_VA_1 Telephony '0000001' HLC_VA_2 Facsimile Group 2/3 '0000100' HLC_VA_3 Facsimile Group 4 Class I '0100001' HLC_VA_4 Facsimile service Group 4, Classes II and III '0100100' HLC_VA_5 Syntax based Videotex '0110010' HLC_VA_6 International Videotex interworking via gateways or interworking units '0110011' HLC_VA_7 Telex service '0110101' HLC_VA_8 FTAM application '1000010' HLC_VA_9 Videotelephony '1100000' TP number TP_106_010 Reference 7.2.3.1.7 TSS reference SIP-ISUP/Basic call/Sending_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name BYE received in confirmed dialogue PSTN XML LowLayerCompatibility present, a REL is sent containing a Low layer compatibility IE Test Purpose Ensure that on receipt of a BYE request in confirmed dialogue and a PSTN XML LowLayerCompatibility is present, a REL is sent and an ATP is present containing a Low layer compatibility IE. The value is mapped as indicated in table 6.1.1.6-2 ISUP Parameter values REL: ATP Low layer compatibility Information Transfer Capability = ITC_value SIP Parameter values CANCEL <?xml version="1.0" encoding="utf-8"?> PSTN LowLayerCompatibility> LLOctet3> CodingStandard>00< InformationTransferCapability>ITC_value< … Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK BYE REL 200 OK (BYE) RLC ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 78 TP number TP_106_011 Reference 7.2.3.1.7 TSS reference SIP-ISUP/Basic call/Sending_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name BYE received in early dialogue PSTN XML LowLayerCompatibility present, a REL is sent containing a Low layer compatibility IE Test Purpose Ensure that on receipt of a BYE request in early dialogue and a PSTN XML LowLayerCompatibility is present, a REL is sent and an ATP is present containing a Low layer compatibility IE. The value is mapped as indicated in table 6.1.1.6-2 ISUP Parameter values REL: ATP Low layer compatibility Information Transfer Capability = ITC_value SIP Parameter values CANCEL <?xml version="1.0" encoding="utf-8"?> PSTN LowLayerCompatibility> LLOctet3> CodingStandard>00< InformationTransferCapability>ITC_value< … Comments Message flows Mg MGCF ISUP INVITE IAM BYE REL 200 OK (BYE) RLC 487 Request Terminated ACK TP number TP_106_012 Reference 7.2.3.1.7 TSS reference SIP-ISUP/Basic call/Sending_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name CANCEL received in early dialogue PSTN XML LowLayerCompatibility present, a REL is sent containing a Low layer compatibility IE Test Purpose Ensure that on receipt of a CANCEL request in early dialogue and a PSTN XML LowLayerCompatibility is present, a REL is sent and an ATP is present containing a Low layer compatibility IE. The value is mapped as indicated in table 6.1.1.6-2 ISUP Parameter values REL: ATP Low layer compatibility Information Transfer Capability = ITC_value SIP Parameter values CANCEL <?xml version="1.0" encoding="utf-8"?> PSTN LowLayerCompatibility> LLOctet3> CodingStandard>00< InformationTransferCapability>ITC_value< … Comments Message flows Mg MGCF ISUP INVITE IAM CANCEL REL 200 OK (CANCEL) RLC 487 Request Terminated ACK Table 6.1.1.6-2: Mapping of Low Layer Compatibility to PSTN XML LowLayerCompatibility ITC_value LLC Information transfer capability XML LLC InformationTransferCapability ITC_VA_1 Speech '00000' ITC_VA_2 3,1 kHz audio '10000' ITC_VA_3 Unrestricted digital info '01001' ITC_VA_4 7 kHz audio '10001' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 79
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.1.7 Receipt of the Release Message	TP number TP_107_001 Reference 7.2.3.1.8 TSS reference SIP-ISUP/Basic call/Receipt_of_REL/ Selection criteria Test Purpose name A REL is received, a BYE request is sent Test Purpose Ensure that on receipt of a REL message in the confirmed dialogue, a BYE is sent. The Reason header is present and the cause value is set to the received cause value in the REL Cause indicator ISUP Parameter values REL: Cause indicator Cause Value = Cause_value SIP Parameter values BYE: Reason: Q.850; cause = Cause_value Comments Cause_value is a PIXIT parameter Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK BYE REL 200 OK (BYE) RLC TP number TP_107_002 Reference 7.2.3.1.8 TSS reference SIP-ISUP/Basic call/Receipt_of_REL/ Selection criteria Test Purpose name A REL is received before an early dialogue is established, a final response is sent Test Purpose Ensure that on receipt of a REL message before an early dialogue is established a SIP final response is sent. The response code is derived from the Cause value received in the REL according the rules described in table 6.1.1.7-1. The cause value of the received REL is present in the Reason header of the sent final response ISUP Parameter values REL: Cause indicator Cause Value = Cause_value SIP Parameter values 4xx/5xx/6xx: Reason: Q.850; cause = Cause_value Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying SIP_final_Response REL ACK RLC TP number TP_107_003 Reference 7.2.3.1.8 TSS reference SIP-ISUP/Basic call/Receipt_of_REL/ Selection criteria Test Purpose name A REL is received after an early dialogue is established (180), a final response is sent Test Purpose Ensure that on receipt of a REL message after an early dialogue due to sending a 180 Ringing is established a SIP final response is sent. The response code is derived from the Cause value received in the REL according the rules described in table 6.1.1.7-1. The cause value of the received REL is present in the Reason header of the sent final response ISUP Parameter values ACM: BCi Called party status = subscriber free REL: Cause indicator Cause Value = Cause_value SIP Parameter values 4xx/5xx/6xx: Reason: Q.850; cause = Cause_value Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM SIP_final_Response REL ACK RLC ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 80 TP number TP_107_004 Reference 7.2.3.1.8 TSS reference SIP-ISUP/Basic call/Receipt_of_REL/ Selection criteria Test Purpose name A REL is received after an early dialogue is established (181), a final response is sent Test Purpose Ensure that on receipt of a REL message after an early dialogue due to sending a 181 Call Is Being Forwarded is established a SIP final response is sent. The response code is derived from the Cause value received in the REL according the rules described in table 6.1.1.7-1. The cause value of the received REL is present in the Reason header of the sent final response ISUP Parameter values ACM: BCi Called party status = no indication Redirection number Call diversion information Generic notification = 'Call is diverted' REL: Cause indicator Cause Value = Cause_value SIP Parameter values 4xx/5xx/6xx: Reason: Q.850; cause = Cause_value Comments Message flows Mg MGCF ISUP INVITE IAM 181 Call Is Being Forwarded ACM SIP_final_Response REL ACK RLC TP number TP_107_005 Reference 7.2.3.1.8 TSS reference SIP-ISUP/Basic call/Receipt_of_REL/ Selection criteria Test Purpose name A REL is received after an early dialogue is established (181), a final response is sent Test Purpose Ensure that on receipt of a REL message after an early dialogue due to sending a 183 Session Progress is established a SIP final response is sent. The response code is derived from the Cause value received in the REL according the rules described in table 6.1.1.7-1. The cause value of the received REL is present in the Reason header of the sent final response ISUP Parameter values ACM: BCi Called party status = no indication oBCi in-band info available REL: Cause indicator Cause Value = Cause_value SIP Parameter values 4xx/5xx/6xx: Reason: Q.850; cause = Cause_value Comments Message flows Mg MGCF ISUP INVITE IAM 183 Session Progress ACM SIP_final_Response REL ACK RLC ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 81 TP number TP_107_006 Reference 7.2.3.1.8 TSS reference SIP-ISUP/Basic call/Receipt_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name An ATP Progress indicator IE present in a REL is mapped into the PSTN XML ProgressIndicator in the sent final response Test Purpose Ensure that on receipt of a REL message and Progress Indicator IE is present in an ATP, a SIP final response as indicated in table 6.1.1.7-1 is sent, a PSTN XML ProgressIndicator is contained and the Progress Description is derived from the received REL Progress indicator as indicated in table 6.1.1.7-2 ISUP Parameter values REL: ATP Progress Indicator = PI_value SIP Parameter values 4xx/5xx/6xx: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet3 CodingStandard>00< Location<yyyy> ProgressOctet4 ProgressDescription>PI_value< Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM SIP_final_Response REL ACK RLC TP number TP_107_007 Reference 7.2.3.1.8 TSS reference SIP-ISUP/Basic call/Receipt_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name An ATP High Layer Compatibility IE present in a REL is mapped into the PSTN XML HighLayerCompatibility in the sent final response Test Purpose Ensure that on receipt of a REL message and High Layer Compatibility IE is present in an ATP, a SIP final response as indicated in table 6.1.1.7-1 is sent, a PSTN XML HighLayerCompatibility is contained and the HighLayerCharacteristics is derived from the received REL High Layer Compatibility as indicated in table 6.1.1.7-3 ISUP Parameter values REL: ATP High Layer Compatibility = HLC_value SIP Parameter values 4xx/5xx/6xx: <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_value< Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM SIP_final_Response REL ACK RLC ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 82 TP number TP_107_008 Reference 7.2.3.1.8 TSS reference SIP-ISUP/Basic call/Receipt_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name An ATP Low Layer Compatibility IE present in a REL is mapped into the PSTN XML LowLayerCompatibility in the sent final response Test Purpose Ensure that on receipt of a REL message and Low Layer Compatibility IE is present in an ATP, a SIP final response as indicated in table 6.1.1.7-1 is sent, a PSTN XML LowLayerCompatibility is contained and the InformationTransferCapability is derived from the received REL Low Layer Compatibility as indicated in table 6.1.1.7-4 ISUP Parameter values REL: ATP Low Layer Compatibility = ITC_value SIP Parameter values 4xx/5xx/6xx: <?xml version="1.0" encoding="utf-8"?> PSTN LowLayerCompatibility> LLOctet3> CodingStandard>00< InformationTransferCapability>ITC_value< LLOctet4> TransferMode>00< InformationTransferRate>10000< Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM SIP_final_Response REL ACK RLC Table 6.1.1.7-1: Receipt of the Release message (REL) SIP_final_Response ←SIP Message ← REL Status code Cause parameter VA_01 404 Not Found Cause value No. 1 (unallocated (unassigned) number) VA_02 604 Does not exist anywhere Cause value No 2 (no route to network) VA_03 604 Does not exist anywhere Cause value No 3 (no route to destination) VA_04 500 Server Internal error Cause value No. 4 (Send special information tone) VA_05 404 Not Found Cause value No. 5 (Misdialled trunk prefix) VA_06 486 Busy Here Cause value No. 17 (user busy) VA_07 480 Temporarily unavailable Cause value No 18 (no user responding) VA_08 480 Temporarily unavailable Cause value No 19 (no answer from the user) VA_09 480 Temporarily unavailable Cause value No. 20 (subscriber absent) VA_10 603 Decline Cause value No 21 (call rejected), Location = 000 / user (U) VA_11 403 Forbidden Cause value No 21 (call rejected) , Location not equal 000 / user (U) VA_12 410 Gone Cause value No 22 (number changed) VA_13 410 Gone Cause value No 23 (Re-route to new destination) VA_14 433 Anonymity Disallowed Cause value No. 24 (call rejected due to ACR supplementary service) VA_15 483 Too many hops Cause value No 25 (Exchange routing error) VA_16 480 Temporarily unavailable Cause value No 26 (Non-selected user clearing) VA_17 502 Bad Gateway Cause value No 27 (destination out of order) VA_18 484 Address Incomplete Cause value No. 28 invalid number format (address incomplete) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 83 SIP_final_Response ←SIP Message ← REL Status code Cause parameter VA_19 501 Not Implemented Cause value No 29 (facility rejected) VA_20 480 Temporarily unavailable Cause value No 31 (normal unspecified) (class default) VA_21 486 Busy here Cause value No 34 (No circuit/channel available) CCBS indicator = CCBS possible VA_22 480 Temporarily unavailable Cause value No 34 (No circuit/channel available) CCBS indicator = CCBS not possible or absent VA_23 500 Server Internal error Cause value No 38 (Network out of order) VA_24 503 Service Unavailable Cause value No 41 (Temporary failure) VA_25 503 Service Unavailable Cause value No 42 (Switching equipment congestion) VA_26 500 Server Internal error Cause value No 43 (Access information discarded) VA_27 503 Service Unavailable Cause value No 44 (Requested channel not available) VA_28 500 Server Internal error Cause value No 46 (Precedence call blocked) VA_29 503 Service Unavailable Cause value No 47 (Resource unavailable (class default)) VA_30 488 Not acceptable here Cause value No 50 (requested facility no subscribed) VA_31 603 Decline Cause value No 55 (Incoming class barred within Closed User Group (CUG)) VA_32 603 Decline Cause value No 57 (bearer capability not authorized) VA_33 503 Service Unavailable Cause value No 58 (bearer capability not presently available) VA_34 501 Not Implemented Cause value No 63 (service option not available, unspecified) (class default) VA_35 500 Server Internal error Cause value No 65 Bearer capability not implemented VA_36 501 Not Implemented Cause value No 69 (Requested facility not implemented) VA_37 501 Not Implemented Cause value No 70 (Only restricted digital information capability available) VA_38 501 Not Implemented Cause value No 79 (Service or option not implemented(class default)) VA_39 403 Forbidden Cause value No 87 (User not member of Closed User Group(CUG)) VA_40 606 Not acceptable Cause value No 88 (incompatible destination) VA_41 403 Forbidden Cause value No 90 (Non existing Closed User Group (CUG) ) VA_42 500 Server Internal error Cause value No 91 (invalid transit network selection) VA_43 500 Server Internal error Cause value No 95 (invalid message) (class default) VA_44 501 Not Implemented Cause value No 97 (Message type non-existent or not implemented) VA_45 501 Not Implemented Cause value No 99 (information element/parameter non-existent or not implemented)) VA_46 501 Not Implemented Cause value No 98 (Message not compatible with call state or message type non-existent or not implemented) VA_47 480 Temporarily unavailable Cause value No. 102 (recovery on timer expiry) VA_48 501 Not Implemented Cause value No 103 (Non-existent parameter passed on) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 84 SIP_final_Response ←SIP Message ← REL Status code Cause parameter VA_49 501 Not Implemented Cause value No 110 (Message with unrecognized Parameter, discarded) VA_50 400 Bad Request Cause value No. 111 (protocol error, unspecified) (class default) VA_51 500 Server Internal error Cause value No. 127 (interworking unspecified) (class default) Table 6.1.1.7-2: Mapping of Progress Indicator information element to PSTN XML ProgressIndicator PI_value ATP Progress Indicator value XML ProgressIndicator ProgressDescription PI_VA_1 Call is not end-to-end ISDN; further call progress information may be available in-band '0000001' PI_VA_2 Destination address is non-ISDN '0000010' PI_VA_3 Origination address is non-ISDN '0000011' PI_VA_4 Call has returned to the ISDN '0000100' PI_VA_5 Interworking has occurred and has resulted in a telecommunication service change '0000101' PI_VA_6 In-band information or an appropriate pattern is now available '0001000' Table 6.1.1.7-3: Mapping of High layer compatibility information element to PSTN XML HighLayerCharacteristic HLC_value DSS1 High layer characteristics identification XML HighLayerCharacteristic HLC_VA_1 Telephony '0000001' HLC_VA_2 Facsimile Group 2/3 '0000100' HLC_VA_3 Facsimile Group 4 Class I '0100001' HLC_VA_4 Facsimile service Group 4, Classes II and III '0100100' HLC_VA_5 Syntax based Videotex '0110010' HLC_VA_6 International Videotex interworking via gateways or interworking units '0110011' HLC_VA_7 Telex service '0110101' HLC_VA_8 FTAM application '1000010' HLC_VA_9 Videotelephony '1100000' Table 6.1.1.7-4: Mapping of Low Layer Compatibility to PSTN XML LowLayerCompatibility ITC_value LLC Information transfer capability XML LLC InformationTransferCapability ITC_VA_1 Speech '00000' ITC_VA_2 3,1 kHz audio '10000' ITC_VA_3 Unrestricted digital info '01001' ITC_VA_4 7 kHz audio '10001' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 85
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.1.8 Receipt of RSC, GRS or CGB (H/W oriented)	TP number TP_108_001 Reference 7.2.3.1.9 2) TSS reference SIP-ISUP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name RSC received before an early dialogue was established Test Purpose Ensure that the SUT does not send any SIP message if a RSC is received and no early dialogue is established. A 480 Temporarily Unavailable is sent or an automatic repeat attempt is performed. ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying CASE A 480 Temporarily Unavailable RSC ACK RLC CASE B IAM TP number TP_108_002 Reference 7.2.3.1.9 2) TSS reference SIP-ISUP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name GRS received before an early dialogue was established Test Purpose Ensure that the SUT does not send any SIP message if a GRS is received and no early dialogue is established. A 480 Temporarily Unavailable for each transaction is sent. ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE (1) IAM 100 Trying INVITE (2) IAM 100 Trying 4xx,5xx,6xx (1) GRS ACK 4xx,5xx,6xx (2) ACK GRA ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 86 TP number TP_108_003 Reference 7.2.3.1.9 2) TSS reference SIP-ISUP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name CGB received before an early dialogue was established Test Purpose Ensure that the SUT does not send any SIP message if a CGB hardware oriented is received and no early dialogue is established. A 480 Temporarily Unavailable for each transaction is sent. ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE (1) IAM 100 Trying INVITE (2) IAM 100 Trying 4xx,5xx,6xx (1) GGB ACK 4xx,5xx,6xx (2) ACK GGBA TP number TP_108_004 Reference 7.2.3.1.9 2) TSS reference SIP-ISUP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name RSC received after an early dialogue was established Test Purpose Ensure that the SUT is able to send a 480 Temporarily Unavailable if a RSC is received and an early dialogue is established ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 480 Temporarily Unavailable RSC ACK RLC TP number TP_108_005 Reference 7.2.3.1.9 2) TSS reference SIP-ISUP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name GRS received after an early dialogue was established Test Purpose Ensure that the SUT is able to send a 480 Temporarily Unavailable for any dialogue affected in the range, if a GRS is received and an early dialogue is established ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE (1) IAM 180 Ringing ACM INVITE (2) IAM 180 Ringing ACM 480 Temporarily Unavailable (1) GRS ACK GRA 480 Temporarily Unavailable (2) ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 87 TP number TP_108_006 Reference 7.2.3.1.9 2) TSS reference SIP-ISUP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name CGB received after an early dialogue was established Test Purpose Ensure that the SUT is able to send a 480 Temporarily Unavailable for any dialogue affected in the range, if a CGB hardware oriented is received and an early dialogue is established ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE (1) IAM 180 Ringing ACM INVITE (2) IAM 180 Ringing ACM 480 Temporarily Unavailable (1) GGB ACK GGBA 480 Temporarily Unavailable (2) ACK TP number TP_108_007 Reference 7.2.3.1.9 1) TSS reference SIP-ISUP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name RSC received after a confirmed dialogue was established Test Purpose Ensure that the SUT is able to send a BYE request if a RSC is received and a confirmed dialogue is established ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 200 OK INVITE ANM ACK BYE RSC 200 OK BYE RLC ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 88 TP number TP_108_008 Reference 7.2.3.1.9 1) TSS reference SIP-ISUP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name GRS received after a confirmed dialogue was established Test Purpose Ensure that the SUT is able to send a BYE request for any dialogue affected in the range, if a GRS is received and a confirmed dialogue is established ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE (1) IAM 180 Ringing ACM 200 OK INVITE ANM ACK INVITE (2) IAM 180 Ringing ACM 200 OK INVITE ANM ACK BYE (1) GRS 200 OK BYE GRA BYE (2) 200 OK BYE TP number TP_108_009 Reference 7.2.3.1.9 1) TSS reference SIP-ISUP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name CGB received after a confirmed dialogue was established Test Purpose Ensure that the SUT is able to send a BYE request for any dialogue affected in the range, if a CGB hardware oriented is received and a confirmed dialogue is established ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE (1) IAM 180 Ringing ACM 200 OK INVITE ANM ACK INVITE (2) IAM 180 Ringing ACM 200 OK INVITE ANM ACK BYE (1) GGB 200 OK BYE GGBA BYE (2) 200 OK BYE ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 89
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.1.9 Receipt of REFER	TP number TP_109_001 Reference 7.2.3.1.9a TSS reference SIP-ISUP/Basic call/Receipt_of_REFER/ Selection criteria Test Purpose name REFER received in the confirmed dialogue Test Purpose Ensure that on receipt of a REFER request in the confirmed dialogue, a 403 Forbidden response to this REFER request is sent ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK REFER 403 Forbidden Apply post test routine TP number TP_109_002 Reference 7.2.3.1.9a TSS reference SIP-ISUP/Basic call/Receipt_of_REFER/ Selection criteria Test Purpose name REFER received in the early dialogue Test Purpose Ensure that on receipt of a REFER request in the early dialogue, a 403 Forbidden response to this REFER request is sent ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM REFER 403 Forbidden Apply post test routine
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.1.10 Autonomous Release at I-MGCF	TP number TP_110_001 Reference 7.2.3.1.10 TSS reference SIP-ISUP/Basic call/Autonomous_Release/ Selection criteria NOT PICS 6.2.3/1 AND NOT PICS 6.2.3/2 Test Purpose name Determination that insufficient digits received Test Purpose Ensure that on receipt of an INVITE request and the SUT determines that insufficient digits received, the SUT sends a 484 Address Incomplete final response ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE 100 Trying 484 Address Incomplete ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 90 TP number TP_110_002 Reference 7.2.3.1.10 TSS reference SIP-ISUP/Basic call/Autonomous_Release/ Selection criteria Test Purpose name Connection request is not routable Test Purpose Ensure that on receipt of an INVITE request and the SUT is unable to route the call due to congestion, the SUT sends a 480 Temporarily Unavailable final response ISUP Parameter values SIP Parameter values Comments Prepare the SUT that a call is not routeable e.g. no circuit available Message flows Mg MGCF ISUP Apply pre test routine INVITE 100 Trying 480 Temporarily Unavailable ACK TP number TP_110_003 Reference 7.2.3.1.10 TSS reference SIP-ISUP/Basic call/Autonomous_Release/ Selection criteria Test Purpose name Call release due to the ISUP/BICC compatibility procedure Test Purpose Ensure that on receipt of an unknown parameter in an ISUP/BICC message and the parameter compatibility is set to 'Release call', a REL is sent the cause value is set to #99 or #110 and in addition a 500 Server Internal Error is sent, the Reason header cause value is set to the same value as sent in the REL ISUP Parameter values CPG: unknown parameter, parameter compatibility = release call REL: cause value = 99 or 110 SIP Parameter values 500 Server Internal Error: Reason: cause=99 or 110 Comments Message flows Mg MGCF ISUP Apply pre test routine INVITE IAM 180 Ringing ACM CPG 500 Server Internal Error REL ACK RLC TP number TP_110_004 Reference 7.2.3.1.10 TSS reference SIP-ISUP/Basic call/Autonomous_Release/ Selection criteria Test Purpose name Call release due to the ISUP/BICC compatibility procedure Test Purpose Ensure that on receipt of an unknown ISUP/BICC message and the message compatibility is set to 'Release call', a REL is sent the cause value is set to #97 and in addition a 500 Server Internal Error is sent, the Reason header cause value is set to the same value as sent in the REL ISUP Parameter values Unknown message: message compatibility = release call REL: cause value = 97 SIP Parameter values 500 Server Internal Error: Reason: cause=97 Comments Message flows Mg MGCF ISUP Apply pre test routine INVITE IAM 180 Ringing ACM <any unknown message> 500 Server Internal Error REL ACK RLC ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 91 TP number TP_110_005 Reference 7.2.3.1.10 TSS reference SIP-ISUP/Basic call/Autonomous_Release/ Selection criteria Test Purpose name Call release due to T7 expiry Test Purpose Ensure that on T7 expiry, the call is released. A REL is sent. In addition a 484 Address Incomplete is sent and the cause value of the Reason header is equal to the Cause indicator value in the sent REL ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM T7 expiry 484 Address Incomplete REL ACK RLC TP number TP_110_006 Reference 7.2.3.1.10 TSS reference SIP-ISUP/Basic call/Autonomous_Release/ Selection criteria Test Purpose name Call release due to T9 expiry Test Purpose Ensure that on expiry of the timer T9 the call is released. A REL is sent and the Cause indicator value is set to #19. In addition a 480 Temporarily Unavailable is sent and the cause value of the Reason header is set to #19 ISUP Parameter values REL: cause value = 19 SIP Parameter values 480 Temporarily Unavailable: Reason: cause=19 Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM T9 expiry 480 Temporarily Unavailable REL ACK RLC
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.2 Outgoing Call Interworking from ISUP to SIP at O-MGCF
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.2.1 Sending of INVITE	TP number TP_201_001 Reference 7.2.3.2.1 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name IAM received, a INVITE is sent Test Purpose Ensure that on receipt of an IAM message, an INVITE request is sent ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 92 TP number TP_201_002 Reference 7.2.3.2.1.1 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/4 Test Purpose name IAM received and COT requested or performed, the INVITE is deferred until COT is received Test Purpose Ensure that on receipt of an IAM and the continuity check indicator is set to: • 'continuity check required on this circuit' • 'continuity check performed on previous circuit' the sending of the initial INVITE request is deferred until the COT message is received and the Continuity indicator is set to 'continuity check successful' ISUP Parameter values IAM: Nature of connection indicator= continuity check required on this circuit or continuity check performed on previous circuit COT: Continuity indicator=continuity check successful SIP Parameter values Comments Message flows ISUP MGCF Mg IAM COT INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 93 TP number TP_201_003 Reference 7.2.3.2.1.2 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/3 Test Purpose name Preconditions indicated in the supported header Test Purpose Ensure that on receipt of an IAM and the continuity indicator is set to 'Continuity check performed on a previous circuit' or 'Continuity check required on this circuit' an INVITE request is sent and the Supported header contains the value precondition and 100rel. If the COT message is received, an UPDATE request is sent to fulfil the preconditions ISUP Parameter values IAM: Nature of connection indicator= continuity check required on this circuit or continuity check performed on previous circuit COT: Continuity indicator=continuity check successful SIP Parameter values INVITE: Supported: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying 183 Session Progress PRACK 200 OK (PRACK) COT UPDATE 200 OK (UPDATE) Apply post test routine TP number TP_201_004 Reference 7.2.3.2.1.3 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/11 Test Purpose name Information request procedure successful, Calling party number in INF received Test Purpose Ensure that on receipt of an IAM and no Calling party number is present, an Information Request (INR) message is sent. On receipt of an Information (INF) message containing a calling party number the initial INVITE request is sent ISUP Parameter values IAM: No calling party number present INR: Calling party address request indicator=calling party address requested INF: Calling party address response=calling party address included Calling party number SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INR INF INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 94 TP number TP_201_005 Reference 7.2.3.2.1.3 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/11 AND PICS 6.2.1/12 Test Purpose name Information request procedure not successful, no Calling party number in INF received, the call is rejected Test Purpose Ensure that on receipt of an IAM and no Calling party number is present, an Information Request (INR) message is sent. On receipt of an Information (INF) message and no Calling party number is present, the call is rejected ISUP Parameter values IAM: No calling party number present INR: Calling party address request indicator=calling party address requested INF: Calling party address response=calling party address not included SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INR INF REL RLC Apply post test routine TP number TP_201_006 Reference 7.2.3.2.1.3 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/11 AND NOT PICS 6.2.1/12 Test Purpose name Information request procedure not successful, no Calling party number in INF received, the call is continued Test Purpose Ensure that on receipt of an IAM and no Calling party number is present, an Information Request (INR) message is sent. On receipt of an Information (INF) message and no Calling party number is present, the call is continued ISUP Parameter values IAM: No calling party number present INR: Calling party address request indicator=calling party address requested INF: Calling party address response=calling party address not included SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INR INF INVITE 100 Trying Apply post test routine TP number TP_201_007 Reference 7.2.3.2.1.3 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/11 Test Purpose name Information request procedure not successful, T 33 is expired Test Purpose Ensure that on receipt of an IAM and no Calling party number is present, an Information Request (INR) message is sent. If timer T33 is expired, the call is rejected ISUP Parameter values IAM: No calling party number present INR: Calling party address request indicator=calling party address requested SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INR Start T33 REL T33 Expiry RLC Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 95 TP number TP_201_008 Reference 7.2.3.2.1.4 a) TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name End of address signalling determined by receipt of end-of-pulsing signal Test Purpose Ensure that on receipt of an IAM and the called party number contains the end-of-pulsing (ST) signal, the initial INVITE is sent ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_201_009 Reference 7.2.3.2.1.4 b) TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name End of address signalling determined by receipt of the maximum number of digits used in the national numbering plan Test Purpose Ensure that on receipt of an IAM and the called party number contains maximum number of digits used in the national numbering plan, the initial INVITE is sent ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_201_010 Reference 7.2.3.2.1.4 c) TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name End of address signalling determined by receipt of sufficient number of digits to route the call to the called party Test Purpose Ensure that on receipt of an IAM and the called party number contains a sufficient number of digits to route the call to the called party, the initial INVITE is sent ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_201_011 Reference 7.2.3.2.1.4 d) TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name End of address signalling determined by observing that timer Ti/w1 has expired Test Purpose Ensure that on receipt of an IAM followed by several SAMs and the minimum number of digits required for routing the call have been received timer Ti/w1 is started. When timer Ti/w1 is expired the initial INVITE is sent ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM SAM SAM Start Ti/w1 Timeout Ti/w1 INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 96 TP number TP_201_012 Reference 7.2.3.2.1.4 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name Early ACM is sent after expiry of Ti/w2 receipt of end-of-pulsing signal Test Purpose Ensure that an initial INVITE is sent after receipt of end-of-pulsing signal, the timer Ti/w2 is started. After expiry of Ti/w2 an ACM is sent and the called party status indicator is set to 'no indication' ISUP Parameter values ACM: Called party status=no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM SAM SAM Start Ti/w2 INVITE 100 Trying ACM Timeout Ti/w2 Apply post test routine TP number TP_201_013 Reference 7.2.3.2.1.4 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name Early ACM is sent after expiry of Ti/w2 receipt of the maximum number of digits used in the national numbering plan Test Purpose Ensure that an initial INVITE is sent after receipt of the maximum number of digits used in the national numbering plan, the timer Ti/w2 is started. After expiry of Ti/w2 an ACM is sent and the called party status indicator is set to 'no indication' ISUP Parameter values ACM: Called party status=no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM SAM SAM Start Ti/w2 INVITE 100 Trying ACM Timeout Ti/w2 Apply post test routine TP number TP_201_014 Reference 7.2.3.2.1.4 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name Early ACM is sent after expiry of Ti/w2 receipt of a sufficient number of digits to route the call to the called party Test Purpose Ensure that an initial INVITE is sent after receipt of a sufficient number of digits to route the call to the called party, the timer Ti/w2 is started. After expiry of Ti/w2 an ACM is sent and the called party status indicator is set to 'no indication' ISUP Parameter values ACM: Called party status=no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM SAM SAM Start Ti/w2 INVITE 100 Trying ACM Timeout Ti/w2 Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 97 TP number TP_201_015 Reference 7.2.3.2.1.4 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.3/3 Test Purpose name A PSTN XML SendingCompleteIndication is sent if the end of the address signalling is determined Test Purpose Ensure that the end of the address signalling is determined a PSTN XML SendingCompleteIndication is sent ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM SAM SAM INVITE 100 Trying Apply post test routine TP number TP_201_016 Reference 7.2.3.2.1a.2 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.3/1 Test Purpose name Overlap dialling using the in-dialogue method Test Purpose Ensure that on receipt of a 183 Session Progress as a response to an INVITE containing an insufficient number of digits, the SUT sends all the digits received in additional SAMs in an additional INVITE and INFO requests depends on whether a final response or provisional response was received for the initial INVITE request. The INFO request contains an x-session-info attachment SubsequentDigit includes the digits received in the SAMs ISUP Parameter values SIP Parameter values INFO: SubsequentDigit: <digits received in SAMs> Comments Message flows ISUP MGCF Mg IAM INVITE CASE A 484 Address Incomplete ACK SAM INVITE 183 Session Progress SAM INFO 200 OK (INFO) CASE B 183 Session Progress SAM INFO 200 OK (INFO) SAM INFO 200 OK (INFO) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 98 TP number TP_201_017 Reference 7.2.3.2.1a.3 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.3/2 Test Purpose name Overlap dialling using the multiple INVITE method Test Purpose Ensure that on receipt of a 484 Address Incomplete as a response to an INVITE request containing an insufficient number of digits, the SUT sends all the digits received in additional SAMs in an additional INVITE requests. The Call-ID and the From tag values are identical to the values sent in the initial INVITE ISUP Parameter values SIP Parameter values INVITE: Request URI <all the received digits in IAM and SAMs> From: tag=<equal to initial INVITE> Call-ID: <equal to initial INVITE> Comments Message flows ISUP MGCF Mg IAM INVITE 484 Address Incomplete ACK SAM INVITE 484 Address Incomplete ACK SAM INVITE Apply post test routine TP number TP_201_018 Reference 7.2.3.2.1.1a.3 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name After expiry of Ti/w2 additional received SAMs are ignored Test Purpose Ensure that after expiry of Ti/w2 an ACM is sent and the called party status indicator is set to 'no indication' and additional received SAMs are ignored ISUP Parameter values ACM: Called party status=no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM SAM SAM Start Ti/w2 INVITE 100 Trying ACM Timeout Ti/w2 SAM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 99 TP number TP_201_019 Reference 7.2.3.2.1a.3 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.3/1 Test Purpose name Overlap dialling using the in-dialogue method Test Purpose Ensure that on receipt of a 180 Ringing while the in-dialogue procedure is used an additional received SAM is ignored ISUP Parameter values SIP Parameter values INFO: SubsequentDigit: <digits received in SAMs> Comments Message flows ISUP MGCF Mg IAM INVITE 484 Address Incomplete ACK SAM INVITE 183 Session Progress SAM INFO 200 OK (INFO) ACM 180 Ringing SAM Apply post test routine TP number TP_201_020 Reference 7.2.3.2.1a.3 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.3/2 Test Purpose name Overlap dialling using the multiple INVITE method Test Purpose Ensure that on receipt of a 180 Ringing while the multiple INVITE procedure is used an additional received SAM is ignored ISUP Parameter values SIP Parameter values INVITE: Request URI <all the received digits in IAM and SAMs> From: tag=<equal to initial INVITE> Call-ID: <equal to initial INVITE> Comments Message flows ISUP MGCF Mg IAM INVITE 484 Address Incomplete ACK SAM INVITE 484 Address Incomplete ACK SAM INVITE ACM 180 Ringing SAM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 100 TP number TP_201_021 Reference 7.2.3.2.1a.3 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.3/1 AND PICS 6.2.1/3 Test Purpose name Overlap dialling using the multiple INVITE method and preconditions used Test Purpose Ensure that on receipt of an IAM and the continuity indicator is set to 'Continuity check performed on a previous circuit' or 'Continuity check required on this circuit' the INVITE requests are sent for all digits to be transferred and the Supported header contains the value precondition and 100rel. If the COT message is received, an UPDATE request is sent to fulfil the preconditions ISUP Parameter values IAM: Nature of connection indicator= continuity check required on this circuit or continuity check performed on previous circuit COT: Continuity indicator=continuity check successful SIP Parameter values INVITE: Request URI <all the received digits in IAM and SAMs> From: tag=<equal to initial INVITE> Call-ID: <equal to initial INVITE> Supported: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv 200 OK UPDATE SDP a=curr:qos local sendrecv a=curr:qos remote sendrecv a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments The SAMs should sent within the duration of timer T8 Message flows ISUP MGCF Mg IAM INVITE 484 Address Incomplete ACK SAM INVITE 484 Address Incomplete ACK SAM INVITE 183 Session Progress PRACK 200 OK (PRACK) COT UPDATE 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 101 TP number TP_201_022 Reference 7.2.3.2.1a.3 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.3/1 Test Purpose name Timer Ti/w3 expires, REL cause 28 is sent Test Purpose Ensure that on expiry of timer Ti/w3 a REL is sent and the cause value is set to #28 ISUP Parameter values REL: Cause=invalid number format (address incomplete) SIP Parameter values INVITE: Request URI <all the received digits in IAM and SAMs> From: tag=<equal to initial INVITE> Call-ID: <equal to initial INVITE> Comments Message flows ISUP MGCF Mg IAM INVITE Start Ti/w3 484 Address Incomplete ACK SAM INVITE Start Ti/w3 484 Address Incomplete ACK REL Timeout Ti/w3 RLC Apply post test routine TP number TP_201_023 Reference 7.2.3.2.1.5 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of USI and USI prime into PSTN XML BearerCapability element Test Purpose Ensure that on receipt of an IAM that includes a USI and USI Prime parameter then the SUT: • Map the USI Prime into the second Bearer Capability stated in the XML BearerCapability element and • The first offered codec is the CLEARMODE codec • Map the USI into the first Bearer Capability stated in the XML BearerCapability element and • The second offered codec is a Audio codec ISUP Parameter values IAM: USI=speech or 3,1 kHz audio USI prime=unrestricted digital info with T/A TMR Prime: 64 kBit/s preferred ATP(HLC Video Telephony) SIP Parameter values INVITE: <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>mapped from USI< …. BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>mapped from USI prime< …. SDP: m=audio <proper port number> RTP/AVP CLEARMODE 8 … Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 102 TP number TP_201_024 Reference 7.2.3.2.2.1 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name Called party number is mapped into Request URI in the sent INVITE request Test Purpose Ensure that on receipt of an IAM the called party number is mapped into the Request URI of the sent INVITE request: • If the nature of address indicator is set to 'National (significant) number' then the country code of the network in which the SUT is located and a leading '+' is inserted before the number digits received in the Called party number • If the nature of address set to 'International number' a '+' is inserted before the number digits received in the Called party number ISUP Parameter values IAM: Called party number= National (significant) number or International number SIP Parameter values INVITE: Request URI sip: '+CC' <called party number digits>@hostportion; user=phone or tel: '+CC' <called party number digits> if the called party number is a national number sip: '+' <called party number digits>@hostportion; user=phone or tel: '+' <called party number digits> if the called party number is an international number Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_201_025 Reference 7.2.3.2.2.1 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name Called party number is mapped into To header in the sent INVITE request Test Purpose Ensure that on receipt of an IAM the called party number is mapped into the Request URI of the sent INVITE request: • If the nature of address indicator is set to 'National (significant) number' then the country code of the network in which the SUT is located and a leading '+' is inserted before the number digits received in the Called party number • If the nature of address set to 'International number' a '+' is inserted before the number digits received in the Called party number ISUP Parameter values IAM: Called party number= National (significant) number or International number SIP Parameter values INVITE: To sip: '+CC' <called party number digits>@hostportion; user=phone or tel: '+CC' <called party number digits> if the called party number is a national number sip: '+' <called party number digits>@hostportion; user=phone or tel: '+' <called party number digits> if the called party number is an international number Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 103 TP number TP_201_026 Reference 7.2.3.2.2.2. TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name Mapping of TMR into SDP Test Purpose Ensure that on receipt of an IAM the TMR_value is mapped into the SDP according table 6.1.2.1-1 ISUP Parameter values IAM: TMR=TMR_value SIP Parameter values INVITE: SDP m=<media> <transport> <fmt-list> a= rtpmap:<dynamic-PT> <encoding name>/<clock rate>[/encoding parameters> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine Table 6.1.2.1-1: Mapping of TMR value into m line TMR_value TMR parameter m= line a= line <media> <transport> <fmt-list> rtpmap:<dynamic-PT> <encoding name>/<clock rate>[/encoding parameters> VA_01 "speech" audio RTP/AVP 0 (and possibly 8) rtpmap:0 PCMU/8000 (and possibly rtpmap:8 PCMA/8000) VA_02 "3,1 kHz audio" audio RTP/AVP 0 (and possibly 8) rtpmap:0 PCMU/8000 (and possibly rtpmap:8 PCMA/8000) VA_03 "64 kbit/s unrestricted" audio RTP/AVP Dynamic PT rtpmap:<dynamic-PT> CLEARMODE/8000 TP number TP_201_027 Reference 7.2.3.2.2.2 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name AMR codec included Test Purpose Ensure that on receipt of an IAM an INVITE is sent. If the received IAM contains a TMR set to speech or 3,1 kHz audio, the SDP in the sent INVITE contains an AMR codec ISUP Parameter values IAM: TMR=speech or 3,1 kHz audio SIP Parameter values INVITE: SDP: m=audio <proper port number> RTP/AVP … Dynamic PT a = <rtpmap Dynamic PT> AMR Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 104 TP number TP_201_028 Reference 7.2.3.2.2.2 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name Mapping of USI parameter Test Purpose Ensure that on receipt of an IAM the USI_value is mapped into the SDP according table 6.1.2.1-2 ISUP Parameter values IAM: User service information SIP Parameter values INVITE: SDP m=<media> <transport> <fmt-list> a= rtpmap:<dynamic-PT> <encoding name>/<clock rate>[/encoding parameters> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine Table 6.1.2.1-2: Mapping of USI parameter into m line USI_value USI parameter HLC m= line a= line Information Transport Capability User Information Layer 1 Protocol Indicator <media> <transport> <fmt-list> rtpmap:<dynamic-PT> <encoding name>/<clock rate>[/encoding parameters> VA_01 "speech" "G.711 μ-law" audio RTP/AVP 0 rtpmap:0 PCMU/8000 VA_02 "speech" "G.711 A-law audio RTP/AVP 8 rtpmap:8 PCMA/8000 VA_03 "3,1 kHz audio" "Facsimile Group 2/3" Udptl or tcp t38 Based on ITU-T T.38 [4] TP number TP_201_029 Reference 7.2.3.2.2.3A TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name Mapping of Calling party's category into cpc parameter Test Purpose Ensure that on receipt of an IAM the calling party's category CPC_value is mapped into the 'cpc' parameter in the P-Asserted-Identity and the Accept-Language header in the sent INVITE as described in table 6.1.2.1-3 ISUP Parameter values IAM: Calling party's category SIP Parameter values INVITE: P-Asserted-Identity Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine Table 6.1.2.1-3: Mapping of Calling's party category into 'cpc' parameter and Accept-Language header CPC_value ISUP IAM parameter SIP Parameters Calling party's category "cpc" URI parameter in P-Asserted-Identity Accept-Language VA_01 operator, language French operator fr VA_02 operator, language English operator en VA_03 operator, language German operator de VA_04 operator, language Russian operator ru VA_05 operator, language Spanish operator es VA_06 ordinary calling subscriber ordinary VA_07 Test call test VA_08 Payphone payphone VA_09 calling party's category unknown at this time unknown VA_10 mobile terminal located in the home PLMN mobile-hplmn VA_11 mobile terminal located in a visited PLMN mobile-vplmn ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 105 TP number TP_201_030 Reference 7.2.3.2.2.4 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/8 Test Purpose name HOP counter procedure supported Test Purpose Ensure that on receipt of the HOP counter parameter, the value is mapped into the Max-Forwards header. The value of the Max-Forwards header is created from the HOP counter value by applying a given factor ISUP Parameter values IAM: HOP SIP Parameter values INVITE: Max-Forwards Comments The factor used to map from Hop Counter to Max-Forwards for a given call will depend on call origin, and will be provisioned at the O-MGCF based on network topology, trust domain rules, and bilateral agreement. Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_201_031 Reference 7.2.3.2.2.5 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria Test Purpose name The O-MGCF inserts an IMS Communication Service Identifier Test Purpose For speech and video calls, the SUT shall insert an IMS Communication Service Identifier, indicating the IMS Multimedia Telephony Communication Service ISUP Parameter values SIP Parameter values INVITE: Contact: icsi-ref Accept-Contact: P-Asserted-Service: urn:urn-7:3gpp-service.ims.icsi.mmtel Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_201_032 Reference 7.2.3.2.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/9 Test Purpose name Support of P-Early-Media header Test Purpose Ensure that on receipt of an IAM a P-Early-Media header is present in the sent INVITE request ISUP Parameter values SIP Parameter values INVITE: P-Early-Media: supported Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 106 TP number TP_201_033 Reference 7.2.3.2.2.7 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of High Layer Compatibility IE into PSTN XML HighLayerCompatibility Test Purpose Ensure stat on receipt of an IAM and an ATP parameter is present containing a High Layer Compatibility IE a PSTN XML HighLayerCompatibility element is present derived according the HLC_VA as indicated in table 6.1.2.1-4 ISUP Parameter values IAM: ATP High Layer Compatibility High Layer Characteristics=HLC_VA SIP Parameter values INVITE: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_VA< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine Table 6.1.2.1-4: Mapping of ISUP ATP High layer compatibility into PSTN XML HighLayerCharacteristic HLC_VA DSS1 High layer characteristics identification XML HighLayerCharacteristic HLC_VA_1 Telephony '0000001' HLC_VA_2 Facsimile Group 2/3 '0000100' HLC_VA_3 Facsimile Group 4 Class I '0100001' HLC_VA_4 Facsimile service Group 4, Classes II and III '0100100' HLC_VA_5 Syntax based Videotex '0110010' HLC_VA_6 International Videotex interworking via gateways or interworking units '0110011' HLC_VA_7 Telex service '0110101' HLC_VA_8 FTAM application '1000010' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 107 TP number TP_201_034 Reference 7.2.3.2.2.7 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Low Layer Compatibility IE into PSTN XML LowLayerCompatibility Test Purpose Ensure stat on receipt of an IAM and an ATP parameter is present containing a Low Layer Compatibility IE a PSTN XML LowLayerCompatibility element is present derived according the ITC_VA as indicated in table 6.1.2.1-5 ISUP Parameter values IAM: ATP Low Layer Compatibility InformationTransferCapability=ITC_VA SIP Parameter values INVITE: <?xml version="1.0" encoding="utf-8"?> PSTN LowLayerCompatibility> LLOctet3> CodingStandard>00< InformationTransferCapability>ITC_VA< LLOctet4> TransferMode>00< InformationTransferRate>10000< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine Table 6.1.2.1-5: Mapping of ISUP ATP Low Layer Compatibility into PSTN XML LowLayerCompatibility ITC_VA LLC Information transfer capability XML LLC InformationTransferCapability ITC_VA_1 Speech '00000' ITC_VA_2 3,1 kHz audio '10000' ITC_VA_3 Unrestricted digital info '01001' ITC_VA_4 7 kHz audio '10001' TP number TP_201_035 Reference 7.2.3.2.2.7 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Bearer Capability IE into PSTN XML BearerCapability Test Purpose Ensure stat on receipt of an IAM and an USI parameter is present ,a PSTN XML BearerCapability element is present derived according the ITC_value as indicated in table 6.1.2.1-6 ISUP Parameter values IAM: USI Information Transfer Capability=ITC_value SIP Parameter values INVITE: <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>ITC_value< BCoctet4 TransferMode>00< InformationTransferRate>10000< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 108 Table 6.1.2.1-6: Mapping of ISUP User Service Information into PSTN XML BearerCapability ITC_value USI Information transfer capability XML InformationTransferCapability VA_01 Speech '00000' VA_02 3,1 kHz audio '10000' VA_03 unrestricted digital information '01000' TP number TP_201_036 Reference 7.2.3.2.2.7 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/5 AND PICS 6.2.1/22 Test Purpose name Mapping of ISUP UTI parameter into PSTN XML BearerCapability Test Purpose Ensure stat on receipt of an IAM and an User Teleservice Information parameter is present, a PSTN XML HighLayerCompatibility element is present derived according the HLC_value as indicated in table 6.1.2.1-7 ISUP Parameter values IAM: UTI High Layer Characteristics>HLC_value SIP Parameter values INVITE: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_value< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine Table 6.1.2.1-7: Mapping of User Teleservice Information into PSTN XML HighLayerCharacteristic HLC_value DSS1 High layer characteristics identification XML HighLayerCharacteristic VA_01 Telephony '0000001' VA_02 Facsimile Group 2/3 '0000100' VA_03 Facsimile Group 4 Class I '0100001' VA_04 Facsimile service Group 4, Classes II and III '0100100' VA_05 Syntax based Videotex '0110010' VA_06 International Videotex interworking via gateways or interworking units '0110011' VA_07 Telex service '0110101' VA_08 FTAM application '1000010' VA_09 Videotelephony '1100000' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 109 TP number TP_201_037 Reference 7.2.3.2.2.8 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Forward call indicator into PSTN XML ProgressIndicator Test Purpose Ensure that on receipt of an IAM the ISDN User Part indicator and the ISDN access indicator of the Forward call indicator are mapped into a PSTNXML ProgressIndicator element according the roles PI_value in table 6.1.2.1-8 ISUP Parameter values IAM: Forward call indicator ISDN User Part indicator ISDN access indicator SIP Parameter values INVITE: PSTM XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet3 CodingStandard>00< Location>yyyy< ProgressOctet4 ProgressDescription>PI_value< Comments The Progress indicator value 6 is not specified in Q.931 Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine Table 6.1.2.1-8: Mapping of Forward call indicator into PSTN XML ProgressIndicator PI_value Forward call indicators parameter PSTN XML body with Progress indicator No ISDN User Part indicator ISDN access indicator VA_01 0 (ISDN User Part not used all the way) '0000001' Call is not end-to-end ISDN; further call progress information may be available in-band VA_02 1 ("ISDN User Part used all the way") 0 ("originating access non - ISDN") '0000011' Origination address is non-ISDN VA_03 1 ("ISDN User Part used all the way") 1 ("originating access ISDN") '0000110' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 110 TP number TP_201_038 Reference 7.2.3.2.2.7 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of Progress Indicator IE into PSTN XML ProgressIndicator Test Purpose Ensure stat on receipt of an IAM and an ATP parameter is present containing a Progress Indicator IE a PSTN XML ProgressIndicator element is present derived according the PI_VA as indicated in table 6.1.2.1-9 ISUP Parameter values IAM: ATP Progress Indicator Progress Description=PI_VA SIP Parameter values INVITE: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet3 CodingStandard>00< Location>0000< ProgressOctet4 ProgressDescription>PI_VA< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine Table 6.1.2.1-9: Mapping of ISUP ATP Progress Indicator into PSTN XML ProgressIndicator PI_VA ATP Progress Indicator value XML ProgressIndicator ProgressDescription PI_VA_1 Call is not end-to-end ISDN; further call progress information may be available in-band '0000001' PI_VA_2 Destination address is non-ISDN '0000010' PI_VA_3 Origination address is non-ISDN '0000011' PI_VA_4 Call has returned to the ISDN '0000100' PI_VA_5 Interworking has occurred and has resulted in a telecommunication service change '0000101' PI_VA_6 In-band information or an appropriate pattern is now available '0001000' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 111 TP number TP_201_039 Reference 7.2.3.2.2A1.1 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.2/1 Test Purpose name Number Portability Separate Directory Number Addressing Method is used Test Purpose Ensure that on receipt of an IAM and the Called Directory Number is present Nature of address indicator: "Network routing number in national (significant) number format" or "National (significant) number" or "Network routing number in network specific number format", an INVITE us sent The userpart of the request URI is derived from the Called Directory Number. '+CC' is inserted before the digitstring: • The rn parameter of the request URI is derived from the Called Party Number. '+CC' is inserted before the digitstring • The npdi URI parameter is added to the request URI The userpart of the To header field is derived from the Called Directory Number. '+CC' is inserted before the digitstring: • The rn parameter of the request URI is derived from the Called Party Number. '+CC' is inserted before the digitstring • The npdi URI parameter is added to the request URI ISUP Parameter values IAM: Called party number "National (significant) number" Called Directory Number Nature of address indicator: "Network routing number in national (significant) number format" or "National (significant) number" or "Network routing number in network specific number format" SIP Parameter values INVITE: Request line <+CC Called Directory Number>; rn= +CC Called party number;npdi To: <+CC Called Directory Number>; rn= +CC Called party number;npdi Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 112 TP number TP_201_040 Reference 7.2.3.2.2A1.2 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.2/2 Test Purpose name Number Portability Concatenated Addressing Method is used. Test Purpose Ensure that on receipt of an IAM and the Called Directory Number is not present, the Nature of address indicator of the Called party number is set to: "Network routing number concatenated with called directory number" or "National (significant) number", an INVITE us sent The userpart of the request URI is derived from the Called Party Number - the prefix representing the Portability routing number is removed. '+CC' is inserted before the digitstring: • The rn parameter of the request URI is derived from the Called Party Number. The digits follow the prefix representing the Portability Routing Number are removed from the digitstring. '+CC' is inserted before the digitstring • The npdi URI parameter is added to the request URI The userpart of the To header field is derived from the Called Party Number- the prefix representing the Portability routing number is removed. '+CC' is inserted before the digitstring: • The rn parameter of the request URI is derived from the Called Party Number. The digits follow the prefix representing the Portability Routing Number are removed from the digitstring. '+CC' is inserted before the digitstring • The npdi URI parameter is added to the request URI ISUP Parameter values IAM: Called party number Nature of address indicator: "Network routing number concatenated with called directory number" or "National (significant) number" SIP Parameter values INVITE: Request line <+CC Called Party Number>; rn= <+CC Portability Routing Number>;npdi To: <+CC Called Party Number>; rn= <+CC Portability Routing Number>;npdi Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 113 TP number TP_201_041 Reference 7.2.3.2.2A1.3 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.2/3 Test Purpose name Number Portability Separate Network Routing Number Addressing Method is used. Test Purpose Ensure that on receipt of an IAM and the Network Routing Number is present Nature of address indicator: "Network routing number in national (significant) number format" or "Network routing number in network specific number format", an INVITE us sent The userpart of the request URI is derived from the Called Party Number. '+CC' is inserted before the digitstring: • The rn parameter of the request URI is derived from the Network Routing Number. '+CC' is inserted before the digitstring • The npdi URI parameter is added to the request URI The userpart of the To header field is derived from the Called Party Number. '+CC' is inserted before the digitstring: • The rn parameter of the request URI is derived from the Network Routing Number. '+CC' is inserted before the digitstring • The npdi URI parameter is added to the request URI ISUP Parameter values IAM: Called party number "National (significant) number" Network Routing Number Nature of address indicator: "Network routing number in national (significant) number format" or "National (significant) number" or "Network routing number in network specific number format" SIP Parameter values INVITE: Request line <+CC Called Party Number>; rn= <+CC Network Routing Number>;npdi To: <+CC Called Party Number>; rn= <+CC Network Routing Number>;npdi Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_201_042 Reference 7.2.3.2.2B.1 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.2/5 AND PICS 6.2.2/8 Test Purpose name Mapping of ISUP carrier selection information into 'dai' URI parameter Test Purpose Ensure that on receipt of an IAM and a Transit Network Selection parameter is present, the value of the Transit Network Selection parameter is sent in the cic URI parameter of the Request URI of the sent INVITE request ISUP Parameter values IAM: Transit Network Selection SIP Parameter values INVITE: Request URI sip: <called party number;cic=TNS value Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_201_042 Reference 7.2.3.2.2.8 TSS reference ISUP-SIP/Basic call/Sending_of_INVITE/ Selection criteria PICS 6.2.2/5 AND PICS 6.2.2/9 Test Purpose name Mapping of ISUP carrier selection information into 'dai' URI parameter Test Purpose Ensure that on receipt of an IAM and a carrier selection information parameter is present, the value of the carrier selection information parameter is sent in the dai URI parameter of the Request URI of the sent INVITE request as indicated in table 6.1.2.1-10 ISUP Parameter values IAM: Transit Network Selection SIP Parameter values INVITE: Request URI sip: <called party number;dai= SIP_dai Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 114 Table 6.1.2.1-10: Mapping of ISUP Carrier Selection Information to SIP Dial Around Indicator SIP_dai ISUP Carrier Selection Information parameter SIP "dai=" component SIP_dai_VA_01 'no indication' (0000000) 'no ind' SIP_dai_VA_02 'selected carrier identification code pre-subscribed and no input by calling party' (00000001) "presub" SIP_dai_VA_03 selected carrier identification code presubscribed and input by calling party (00000010) "presub-da" SIP_dai_VA_04 selected carrier identification pre-subscribed and input by calling party undetermined (00000011) "presub-daUnkwn" SIP_dai_VA_05 selected carrier identification not pre-subscribed, and input by calling party (00000100) "da" SIP_dai_VA_06 carrier selected by input from calling party (00001010) "presubUnkwn-da" SIP_dai_VA_07 carrier selected by a network operator (00001011) "operator"
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.2.2 Receipt of CONTINUITY	TP number TP_202_001 Reference 7.2.3.2.3 TSS reference ISUP-SIP/Basic call/Receipt_of_COT/ Selection criteria PICS 6.2.1/3 Test Purpose name COT received after INVITE was sent Test Purpose When the requested preconditions in the IMS have been met and if outstanding continuity procedures have successfully been completed (COT with the Continuity Indicators parameter set to 'continuity check successful' is received), a SDP offer in a SIP UPDATE request shall be sent for each early SIP dialogue confirming that all the required preconditions have been met ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying 183 Session Progress PRACK 200 OK (PRACK) COT UPDATE 200 OK(UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 115
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.2.3 Sending of ACM and awaiting answer indication	TP number TP_203_001 Reference 7.2.3.2.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria Test Purpose name Detection of end of address signalling by the expiry of Timer Ti/w1 Test Purpose Ensure that after expiry of Timer Ti/w1 after the last address signalling information was received, an ACM is sent and the Called party's status indicator is set to 'no indication' ISUP Parameter values ACM: Called party's status indicator=no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM Ti/w1 running SAM Ti/w1 running SAM Ti/w1 running ACM Ti/w1 expired INVITE 100 Trying Apply post test routine TP number TP_203_002 Reference 7.2.3.2.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria Test Purpose name An ACM is sent after a 180 Ringing was received Test Purpose Ensure that on receipt of a 180 Ringing provisional response without P-Early-Media header, the SUT sends an ACM. The Called party's status indicator is set to 'subscriber free'. The ringing tone is sent by the SUT ISUP Parameter values ACM: Called party's status indicator =subscriber free SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Ringing tone Apply post test routine TP number TP_203_003 Reference 7.2.3.2.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/9 Test Purpose name 180 received, a P-Early-Media header is present Test Purpose Ensure that on receipt of a 180 Ringing provisional response with P-Early-Media header does not authorize the backward early media, the SUT sends an ACM. The Called party's status indicator is set to 'subscriber free'. The ringing tone is sent by the SUT ISUP Parameter values ACM: Called party's status indicator =subscriber free SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Ringing tone Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 116 TP number TP_203_004 Reference 7.2.3.2.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/9 AND PICS 6.2.1/14 Test Purpose name 180 received, a P-Early-Media header not authorize early media is present Test Purpose Ensure that on receipt of a 180 Ringing provisional response with P-Early-Media header does not authorize the backward early media, the SUT sends an ACM. The Called party's status indicator is set to 'subscriber free'. Based on local knowledge that the call is transited to a PSTN network the SUT does not generate the awaiting answer indication. ISUP Parameter values ACM: Called party's status indicator =subscriber free SIP Parameter values 180 P-Early-Media: inactive Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Early media Apply post test routine TP number TP_203_005 Reference 7.2.3.2.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/9 Test Purpose name 181 received, a P-Early-Media header authorize early media is present Test Purpose Ensure that on receipt of a 181 Call is Being Forwarded and a P-Early-Media is present authorizing backward early media, an ACM is sent. The Called party's status indicator is set to 'no indication' and an optional backward call indicator is present, the In-band information indicator is set to 'in-band information or appropriate pattern is now available'. The SUT does not generate the awaiting answer indication ISUP Parameter values ACM: Called party's status indicator =no indication oBCi = in-band information or appropriate pattern is now available SIP Parameter values 181 P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 181 Call is Being Forwarded Early media Apply post test routine TP number TP_203_006 Reference 7.2.3.2.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/9 Test Purpose name 183 received, a P-Early-Media header authorize early media is present Test Purpose Ensure that on receipt of a 183 Session Progress and a P-Early-Media header is present authorizing backward early media, an ACM is sent. The Called party's status indicator is set to 'no indication' and an optional backward call indicator is present, the In-band information indicator is set to 'in-band information or appropriate pattern is now available'. The SUT does not generate the awaiting answer indication ISUP Parameter values ACM: Called party's status indicator =no indication oBCi = in-band information or appropriate pattern is now available SIP Parameter values 183 P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Early media Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 117 TP number TP_203_007 Reference 7.2.3.2.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria Test Purpose name ACM is sent after T i/w2 was expired Test Purpose Ensure that after expiry of timer T i/w2 an ACM is sent. The Called party's status indicator is set to 'no indication' ISUP Parameter values ACM: Called party's status indicator =no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM T i/w2 started INVITE 100 Trying ACM T i/w2 expired Apply post test routine TP number TP_203_008 Reference 7.2.3.2.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/15 Test Purpose name MGW plays out early media associated with the Alert-Info header Test Purpose Ensure that the MGW plays a early media associated with the URL in an Alert-Info header contained in a received 180 Ringing response ISUP Parameter values SIP Parameter values 180: Alert-Info: < Media resource URL> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine TP number TP_203_009 Reference 7.2.3.2.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/9 AND PICS 6.2.1/17 Test Purpose name The SUT terminates the sending of awaiting answer indication. Test Purpose Ensure that the SUT terminates the sending of awaiting answer indication as indicated in a P-Early-Media received in a 183 Session Progress and the P-Early-Media header does not authorizes backward early media. The sending awaiting answer indication is disabled. ISUP Parameter values SIP Parameter values 183: P-Early-Media: inactive Comments Message flows ISUP MGCF Mg IAM T i/w2 started INVITE 100 Trying ACM T i/w2 expired Ringing tone 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 118 TP number TP_203_010 Reference 7.2.3.2.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/9 AND PICS 6.2.1/16 Test Purpose name The SUT initiates the sending of awaiting answer indication Test Purpose Ensure that the SUT initiates the sending of awaiting answer indication as indicated in a P-Early-Media received in a 183 Session Progress and the P-Early-Media header authorizes backward early media ISUP Parameter values SIP Parameter values 183: P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Early media Apply post test routine TP number TP_203_011 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria Test Purpose name 180 received, coding of Backward call indicator in ACM TMR speech or 3,1 kHz audio Test Purpose IAM with Transmission Medium Requirement indicator=speech or 3,1 kHz received. Ensure that on receipt of a 180 Ringing response, an ACM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = subscriber free (01) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = incoming echo control device included (1) ISUP Parameter values IAM: Transmission Medium Requirement indicator=speech or 3,1 kHz SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 119 TP number TP_203_012 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria Test Purpose name 181 received, coding of Backward call indicator in ACM TMR speech or 3,1 kHz audio Test Purpose IAM with Transmission Medium Requirement indicator=speech or 3,1 kHz received. Ensure that on receipt of a 181 Call is Being forwarded response, an ACM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = incoming echo control device included (1) ISUP Parameter values IAM: Transmission Medium Requirement indicator=speech or 3,1 kHz SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 181 Call is Being forwarded Apply post test routine TP number TP_203_013 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/9 AND NOT PICS 6.2.1/18 Test Purpose name 183 received, coding of Backward call indicator in ACM TMR speech or 3,1 kHz audio Test Purpose IAM with Transmission Medium Requirement indicator=speech or 3,1 kHz received. Ensure that on receipt of a 183 Session Progress response containing a P-Early-Media header, an ACM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = incoming echo control device included (1) ISUP Parameter values IAM: Transmission Medium Requirement indicator=speech or 3,1 kHz SIP Parameter values 183: P-Early-Media: <backward early media authorized> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 120 TP number TP_203_014 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.4/2 AND NOT PICS 6.2.1/18 Test Purpose name 180 received, coding of Backward call indicator in ACM TMR 64 kBit/s unrestricted Test Purpose IAM with Transmission Medium Requirement indicator=64 kBit/s unrestricted received. Ensure that on receipt of a 180 Ringing response, an ACM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = subscriber free (01) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=64 kBit/s unrestricted SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine TP number TP_203_015 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.4/2 AND NOT PICS 6.2.1/18 Test Purpose name 181 received, coding of Backward call indicator in ACM TMR 64 kBit/s unrestricted Test Purpose IAM with Transmission Medium Requirement indicator=64 kBit/s unrestricted received. Ensure that on receipt of a 181 Call is Being forwarded response, an ACM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=64 kBit/s unrestricted SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 181 Call is Being forwarded Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 121 TP number TP_203_016 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.4/2 AND NOT PICS 6.2.1/18 AND PICS 6.2.1/9 Test Purpose name 183 received, coding of Backward call indicator in ACM TMR 64 kBit/s unrestricted Test Purpose IAM with Transmission Medium Requirement indicator=64 kBit/s unrestricted received. Ensure that on receipt of a 183 Session Progress response containing a P-Early-Media header, an ACM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=64 kBit/s unrestricted SIP Parameter values 183: P-Early-Media: <backward early media authorized> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine TP number TP_203_017 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.4/2 AND PICS 6.2.1/18 Test Purpose name 180 received, coding of Backward call indicator in ACM TMR 64 kBit/s unrestricted Test Purpose IAM with Transmission Medium Requirement indicator=64 kBit/s unrestricted received. Ensure that on receipt of a 180 Ringing response, an ACM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = subscriber free (01) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = no interworking encountered (0) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part used all the way (1) • ISDN access indicator = terminating access ISDN (1) • Echo control device indicator = incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=64 kBit/s unrestricted SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 122 TP number TP_203_018 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.4/2 AND PICS 6.2.1/18 Test Purpose name 181 received, coding of Backward call indicator in ACM TMR 64 kBit/s unrestricted Test Purpose IAM with Transmission Medium Requirement indicator=64 kBit/s unrestricted received. Ensure that on receipt of a 181 Call is Being forwarded response, an ACM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = no interworking encountered (0) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part used all the way (1) • ISDN access indicator = terminating access ISDN (1) • Echo control device indicator = incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=64 kBit/s unrestricted SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 181 Call is Being forwarded Apply post test routine TP number TP_203_019 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.4/2 AND PICS 6.2.1/18 AND PICS 6.2.1/9 Test Purpose name 183 received, coding of Backward call indicator in ACM TMR 64 kBit/s unrestricted Test Purpose IAM with Transmission Medium Requirement indicator=64 kBit/s unrestricted received. Ensure that on receipt of a 183 Session Progress response containing a P-Early-Media header, an ACM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = no interworking encountered (0) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part used all the way (1) • ISDN access indicator = terminating access ISDN (1) • Echo control device indicator = incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=64 kBit/s unrestricted SIP Parameter values 183: P-Early-Media: <backward early media authorized> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 123 TP number TP_203_020 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria Test Purpose name 180 received, coding of Backward call indicator in ACM HLC "Facsimile Group 2/3". Test Purpose IAM with Transmission Medium Requirement indicator=3,1 kHz and High Layer Compatibility= Facsimile Group 2/3 received. Ensure that on receipt of a 180 Ringing response, an ACM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = subscriber free (01) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=3,1 kHz High Layer Compatibility= Facsimile Group 2/3 SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine TP number TP_203_021 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria Test Purpose name 181 received, coding of Backward call indicator in ACM HLC "Facsimile Group 2/3". Test Purpose IAM with Transmission Medium Requirement indicator=3,1 kHz and High Layer Compatibility= Facsimile Group 2/3 received. Ensure that on receipt of a 181 Call is Being forwarded response, an ACM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=3,1 kHz High Layer Compatibility= Facsimile Group 2/3 SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 181 Call is Being forwarded Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 124 TP number TP_203_022 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/9 Test Purpose name 183 received, coding of Backward call indicator in ACM HLC "Facsimile Group 2/3". Test Purpose IAM with Transmission Medium Requirement indicator=3,1 kHz and High Layer Compatibility= Facsimile Group 2/3 received. Ensure that on receipt of a 183 Session Progress response containing a P-Early-Media header, an ACM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=3,1 kHz High Layer Compatibility= Facsimile Group 2/3 SIP Parameter values 183: P-Early-Media: <backward early media authorized> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine TP number TP_203_023 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 1 into Backward call indicator in ACM Test Purpose Ensure that on receipt of a 180 Ringing and the PSTN XML ProgressIndicator is present, the value 1 is mapped into the Backward call indicator present in the ACM: ISDN User Part indicator • ISDN User Part not used all the way (0) ISUP Parameter values ACM: ISDN User Part indicator ISDN User Part not used all the way SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< Comments Progress Information: 'Call is not end-to-end ISDN: further call progress information may be available in-band' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 125 TP number TP_203_024 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 2 in 180 into Backward call indicator in ACM Test Purpose Ensure that on receipt of a 180 Ringing and the PSTN XML ProgressIndicator is present, the value 2 is mapped into the Backward call indicator present in the ACM: ISDN User Part indicator • ISDN User Part used all the way (1) ISDN access indicator • Terminating access non-ISDN (0) ISUP Parameter values ACM: ISDN User Part indicator ISDN User Part used all the way ISDN access indicator Terminating access non-ISDN SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000010< Comments Progress Information: 'Destination address is non-ISDN' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine TP number TP_203_025 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 7 in 180 into Backward call indicator in ACM Test Purpose Ensure that on receipt of a 180 Ringing and the PSTN XML ProgressIndicator is present, the value 7 is mapped into the Backward call indicator present in the ACM: ISDN User Part indicator • ISDN User Part used all the way (1) ISDN access indicator • Terminating access ISDN (1) Interworking indicator • no interworking encountered (0) ISUP Parameter values ACM: ISDN User Part indicator ISDN User Part used all the way ISDN access indicator Terminating access ISDN Interworking indicator no interworking encountered SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000111< Comments Progress Information: value not specified. Meaning 'terminating user is ISDN' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 126 TP number TP_203_026 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 8 in 180 into optional Backward call indicator in ACM Test Purpose Ensure that on receipt of a 180 Ringing and the PSTN XML ProgressIndicator is present, the value 8 is mapped into the Optional backward call indicator present in the ACM: Optional backward call indicators In-band information indicator • in-band information or an appropriate pattern is now available ISUP Parameter values ACM: Optional backward call indicators In-band information indicator in-band information or an appropriate pattern is now available" SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0001000< Comments Progress Information 'In-band information or an appropriate pattern is now available' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine TP number TP_203_027 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 AND PICS 6.2.1/9 Test Purpose name Mapping of PSTN XML ProgressIndicator 1 in 183 into Backward call indicator in ACM Test Purpose Ensure that on receipt of a 183 Session Progress and the PSTN XML ProgressIndicator is present, the value 1 is mapped into the Backward call indicator present in the ACM: ISDN User Part indicator • ISDN User Part not used all the way (0) ISUP Parameter values ACM: ISDN User Part indicator ISDN User Part not used all the way SIP Parameter values 183: P-Early-Media: sendonly <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< Comments Progress Information: 'Call is not end-to-end ISDN: further call progress information may be available in-band' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 127 TP number TP_203_028 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 AND PICS 6.2.1/9 Test Purpose name Mapping of PSTN XML ProgressIndicator 2 in 183 into Backward call indicator in ACM Test Purpose Ensure that on receipt of a 183 Session Progress and the PSTN XML ProgressIndicator is present, the value 2 is mapped into the Backward call indicator present in the ACM: ISDN User Part indicator • ISDN User Part used all the way (1) ISDN access indicator • Terminating access non-ISDN (0) ISUP Parameter values ACM: ISDN User Part indicator ISDN User Part used all the way ISDN access indicator Terminating access non-ISDN SIP Parameter values 183: P-Early-Media: sendonly <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000010< Comments Progress Information: 'Destination address is non-ISDN' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine TP number TP_203_029 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 AND PICS 6.2.1/9 Test Purpose name Mapping of PSTN XML ProgressIndicator 7 in 183 into Backward call indicator in ACM Test Purpose Ensure that on receipt of a 183 Session Progress and the PSTN XML ProgressIndicator is present, the value 7 is mapped into the Backward call indicator present in the ACM: ISDN User Part indicator • ISDN User Part used all the way (1) ISDN access indicator • Terminating access ISDN (1) Interworking indicator • no interworking encountered (0) ISUP Parameter values ACM: ISDN User Part indicator ISDN User Part used all the way ISDN access indicator Terminating access non-ISDN Interworking indicator no interworking encountered SIP Parameter values 183: P-Early-Media: sendonly <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000111< Comments Progress Information: value not specified. Meaning 'terminating user is ISDN' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 128 TP number TP_203_030 Reference 7.2.3.2.5.1 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 AND PICS 6.2.1/9 Test Purpose name Mapping of PSTN XML ProgressIndicator 8 in 183 into Backward call indicator in ACM Test Purpose Ensure that on receipt of a 183 Session Progress and the PSTN XML ProgressIndicator is present, the value 8 is mapped into the Optional backward call indicator present in the ACM: Optional backward call indicators In-band information indicator • in-band information or an appropriate pattern is now available ISUP Parameter values ACM: Optional backward call indicators In-band information indicator in-band information or an appropriate pattern is now available" SIP Parameter values 183: P-Early-Media: sendonly <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0001000< Comments Progress Information 'In-band information or an appropriate pattern is now available' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine TP number TP_203_031 Reference 7.2.3.2.5.2 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/9 Test Purpose name Mapping of P-Early-Media header in 183 into Optional backward call indicator in ACM Test Purpose Ensure that on receipt of a 183 Session Progress and the P-Early-Media header authorizing backward early media is mapped into the Backward call indicator present in the ACM: Optional backward call indicators In-band information indicator • in-band information or an appropriate pattern is now available ISUP Parameter values ACM: Optional backward call indicators In-band information indicator in-band information or an appropriate pattern is now available" SIP Parameter values 183: P-Early-Media: sendonly Comments Progress Information 'In-band information or an appropriate pattern is now available' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 129 TP number TP_203_032 Reference 7.2.3.2.5.2 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/9 Test Purpose name Mapping of P-Early-Media header in 181 into Optional backward call indicator in ACM Test Purpose Ensure that on receipt of a 181 Call is Being Forwarded and the P-Early-Media authorizing backward early media is mapped into the Backward call indicator present in the ACM: Optional backward call indicators In-band information indicator • in-band information or an appropriate pattern is now available ISUP Parameter values ACM: Optional backward call indicators In-band information indicator in-band information or an appropriate pattern is now available" SIP Parameter values 181: P-Early-Media: sendonly Comments Progress Information 'In-band information or an appropriate pattern is now available' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 181 Call is Being Forwarded Apply post test routine TP number TP_203_033 Reference 7.2.3.2.5.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 1 in 180 into the Access Transport Parameter Test Purpose Ensure that on receipt of a 180 Ringing and the PSTN XML ProgressIndicator is present, the value 1 is mapped into the Access Transport Parameter containing the Progress Indicator value 1 in the ACM: Access Transport Parameter Progress Indicator • Progress Description='0000001' ISUP Parameter values ACM: Access Transport Progress Indicator Progress Description='0000001' SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< Comments Progress Information: 'Call is not end-to-end ISDN: further call progress information may be available in-band' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 130 TP number TP_203_034 Reference 7.2.3.2.5.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 2 in 180 into the Access Transport Parameter Test Purpose Ensure that on receipt of a 180 Ringing and the PSTN XML ProgressIndicator is present, the value 2 is mapped into the Access Transport Parameter containing the Progress Indicator value 2 in the ACM: Access Transport Parameter Progress Indicator • Progress Description='0000010' ISUP Parameter values ACM: Access Transport Progress Indicator Progress Description='0000010' SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000010< Comments Progress Information: 'Destination address is non-ISDN' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine TP number TP_203_035 Reference 7.2.3.2.5.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 Test Purpose name PSTN XML ProgressIndicator 7 in 180 is not mapped into the Access Transport Parameter Test Purpose Ensure that on receipt of a 180 Ringing and the PSTN XML ProgressIndicator is present, the value 7 is not mapped into the Access Transport Parameter in the ACM ISUP Parameter values ACM: No Access Transport Parameter present SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000111< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 131 TP number TP_203_036 Reference 7.2.3.2.5.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 8 in 180 into the Access Transport Parameter Test Purpose Ensure that on receipt of a 180 Ringing and the PSTN XML ProgressIndicator is present, the value 8 is mapped into the Access Transport Parameter containing the Progress Indicator value 8 in the ACM: Access Transport Parameter Progress Indicator • Progress Description='0001000' ISUP Parameter values ACM: Access Transport Progress Indicator Progress Description='0001000' SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0001000< Comments Progress Information 'In-band information or an appropriate pattern is now available' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine TP number TP_203_037 Reference 7.2.3.2.5.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 AND PICS 6.2.1/9 Test Purpose name Mapping of PSTN XML ProgressIndicator 1 in 183 into the Access Transport Parameter Test Purpose Ensure that on receipt of a 183 Session Progress and the P-Early-Media header and PSTN XML ProgressIndicator is present, the value 1 is mapped into the Access Transport Parameter containing the Progress Indicator value 1 in the ACM: Access Transport Parameter Progress Indicator • Progress Description='0000001' ISUP Parameter values ACM: Access Transport Progress Indicator Progress Description='0000001' SIP Parameter values 183: P-Early-Media: sendonly <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< Comments Progress Information: 'Call is not end-to-end ISDN: further call progress information may be available in-band' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 132 TP number TP_203_038 Reference 7.2.3.2.5.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 AND PICS 6.2.1/9 Test Purpose name Mapping of PSTN XML ProgressIndicator 2 in 183 into the Access Transport Parameter Test Purpose Ensure that on receipt of a 183 Session Progress and the P-Early-Media header and PSTN XML ProgressIndicator is present, the value 2 is mapped into the Access Transport Parameter containing the Progress Indicator value 2 in the ACM: Access Transport Parameter Progress Indicator • Progress Description='0000010' ISUP Parameter values ACM: Access Transport Progress Indicator Progress Description='0000010' SIP Parameter values 183: P-Early-Media: sendonly <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000010< Comments Progress Information: 'Destination address is non-ISDN' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine TP number TP_203_039 Reference 7.2.3.2.5.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 AND PICS 6.2.1/9 Test Purpose name PSTN XML ProgressIndicator 7 in 183 is not mapped into the Access Transport Parameter Test Purpose Ensure that on receipt of a 183 Session Progress and the PSTN XML ProgressIndicator is present, the value 7 is not mapped into the Access Transport Parameter in the ACM ISUP Parameter values ACM: No Access Transport Parameter present SIP Parameter values 183: P-Early-Media: sendonly <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000111< Comments Progress Information: value not specified. Meaning 'terminating user is ISDN' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 133 TP number TP_203_040 Reference 7.2.3.2.5.4 TSS reference ISUP-SIP/Basic call/Sending_of_ACM/ Selection criteria PICS 6.2.1/5 AND PICS 6.2.1/9 Test Purpose name Mapping of PSTN XML ProgressIndicator 8 in 183 into the Access Transport Parameter Test Purpose Ensure that on receipt of a 183 Session Progress and the P-Early-Media header and PSTN XML ProgressIndicator is present, the value 8 is mapped into the Access Transport Parameter containing the Progress Indicator value 8 in the ACM: Access Transport Parameter Progress Indicator • Progress Description='0001000' ISUP Parameter values ACM: Access Transport Progress Indicator Progress Description='0001000' SIP Parameter values 183: P-Early-Media: sendonly <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0001000< Comments Progress Information 'In-band information or an appropriate pattern is now available' Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress Apply post test routine
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.2.4 Sending of the Call Progress message (CPG)	TP number TP_204_001 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria Test Purpose name A CPG is sent when a 180 is received and a ACM was sent before Test Purpose Ensure that on receipt of a 180 Ringing a CPG message is sent when an ACM was sent before ISUP Parameter values ACM: BCi Called party status=no indication CPG: Event indication=ALERTING SIP Parameter values Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE 100 Trying CPG 180 Ringing Apply post test routine TP number TP_204_002 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/9 Test Purpose name 181 received, CPG is sent Test Purpose Ensure that on receipt of a 181 Call is Being Forwarded a CPG is sent. The Event information parameter in the CPG is set to 'progress' ISUP Parameter values CPG: Event indication=progress SIP Parameter values 181: P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call is Being Forwarded early media early media Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 134 TP number TP_204_003 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/9 Test Purpose name Early media is not authorized if no P-Early-Media header is present in the 180 Test Purpose Ensure that on receipt of a 180 Ringing a CPG is sent. If the 180 Ringing does not contain a P-Early-Media header authorizing early media, the SUT initiates sending of awaiting answer indication ISUP Parameter values SIP Parameter values 180: no P-Early-Media header present Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE CPG 180 Ringing ringing tone Apply post test routine TP number TP_204_004 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/9 Test Purpose name Early media is not authorized if P-Early-Media header does not authorize early media in the 180 Test Purpose Ensure that on receipt of a 180 Ringing a CPG is sent. If the 180 Ringing contains a P-Early-Media header not authorizing early media, the SUT initiates sending of awaiting answer indication ISUP Parameter values SIP Parameter values 180: P-Early-Media: inactive Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE CPG 180 Ringing ringing tone Apply post test routine TP number TP_204_005 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/9 Test Purpose name Early media is authorized if P-Early-Media header authorize early media in the 180 Test Purpose Ensure that on receipt of a 180 Ringing a CPG is sent. If the 180 Ringing contains a P-Early-Media header authorizing early media, the SUT terminates sending of awaiting answer indication and connects through the early media in backward direction ISUP Parameter values SIP Parameter values 180: P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE CPG 180 Ringing early media early media Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 135 TP number TP_204_006 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/14 Test Purpose name The SUT has the knowledge that the call is transited to a PSTN network, the awaiting answer indication is not generated Test Purpose Ensure that the SUT does not generate the awaiting answer indication if it has the local knowledge that the call is transited to a PSTN network and the early media is not authorized ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE 100 Trying CPG 180 Ringing early media early media Apply post test routine TP number TP_204_007 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/9 Test Purpose name Early media is authorized if P-Early-Media header authorize early media in the 183 Test Purpose Ensure that on receipt of a 183 Session Progress a CPG is sent. If the 183 Session Progress contains a P-Early-Media header authorizing early media, the SUT terminates sending of awaiting answer indication and connects through the early media in backward direction ISUP Parameter values SIP Parameter values 183: P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 183 Session Progress early media early media Apply post test routine TP number TP_204_008 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/9 Test Purpose name Early media is authorized if P-Early-Media header authorize early media in the 181 Test Purpose Ensure that on receipt of a 181 Call is Being Forwarded a CPG is sent. If the 181 Call is Being Forwarded contains a P-Early-Media header authorizing early media, the SUT terminates sending of awaiting answer indication and connects through the early media in backward direction ISUP Parameter values SIP Parameter values 181: P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call is Being Forwarded early media early media Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 136 TP number TP_204_009 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/9 Test Purpose name The SUT change the authorization of early media as indicated in the P-Early-Media received in 180 Test Purpose Ensure that the SUT terminates the sending of awaiting answer indication and connect through early media if the P-Early-Media header indicates authorization in the received 180 Ringing response and early media was not authorized before ISUP Parameter values SIP Parameter values 183: P-Early-Media: inactive 180: P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM INVITE ACM 183 Session Progress ringing tone CPG 180 Ringing early media early media Apply post test routine TP number TP_204_010 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/9 Test Purpose name The SUT change the authorization of early media as indicated in the P-Early-Media received in 180 Test Purpose Ensure that the SUT initiates the sending of awaiting answer indication and removes authorization of early media if the P-Early-Media header indicates no authorization of early media received in the 180 Ringing and early media was authorized before ISUP Parameter values SIP Parameter values 183: P-Early-Media: sendonly 180: P-Early-Media: inactive Comments Message flows ISUP MGCF Mg IAM INVITE ACM 183 Session Progress early media early media CPG 180 Ringing ringing tone Apply post test routine TP number TP_204_011 Reference 7.2.3.2.6.1 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 1 in 183 into ATP in the CPG Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 1 in a 183 Session Progress, a CPG is sent and an Access Transport Parameter is present containing a Progress Indicator #1 ISUP Parameter values CPG: Access Transport Progress Indicator Progress Description='0000001' SIP Parameter values 183: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 137 TP number TP_204_012 Reference 7.2.3.2.6.1 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 2 in 183 into ATP in the CPG Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 2 in a 183 Session Progress, a CPG is sent and an Access Transport Parameter is present containing a Progress Indicator #2 ISUP Parameter values CPG: Access Transport Progress Indicator Progress Description='0000010' SIP Parameter values 183: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000010< Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 183 Session Progress Apply post test routine TP number TP_204_013 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 4 in 183 into ATP in the CPG Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 4 in a 183 Session Progress, a CPG is sent and an Access Transport Parameter is present containing a Progress Indicator #4 ISUP Parameter values CPG: Access Transport Progress Indicator Progress Description='0000100' SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< or ProgressDescription>0000010< 183: P-Early-Media: sendonly <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000100< Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 138 TP number TP_204_014 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/5 AND PICS 6.2.1/9 Test Purpose name No mapping of PSTN XML ProgressIndicator 7 in 183 into ATP in the CPG Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 7 in a 183 Session Progress, a CPG is sent and an Access Transport Parameter is present containing a Progress Indicator #4 ISUP Parameter values CPG: Access Transport Progress Indicator Progress Description='0000100' SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< or ProgressDescription>0000010< 183: P-Early-Media: sendonly <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000111< Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 183 Session Progress Apply post test routine TP number TP_204_015 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 8 in 183 into Event information in the CPG Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 8 in a 183 Session Progress, a CPG is sent and Event information parameter is set to 'In-band information or appropriate pattern is now available' ISUP Parameter values CPG: Event information= In-band information or appropriate pattern is now available SIP Parameter values 183: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0001000< Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 139 TP number TP_204_017 Reference 7.2.3.2.6.1 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/5 AND PICS 6.2.1/9 Test Purpose name Mapping of PSTN XML ProgressIndicator 1 in 180 into ATP in the CPG Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 1 in a 180 Ringing, a CPG is sent and an Access Transport Parameter is present containing a Progress Indicator #1 ISUP Parameter values CPG: Access Transport Progress Indicator Progress Description='0000001' SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE CPG 180 Ringing Apply post test routine TP number TP_204_018 Reference 7.2.3.2.6.1 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 2 in 180 into ATP in the CPG Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 2 in a 180 Ringing, a CPG is sent and an Access Transport Parameter is present containing a Progress Indicator #2 ISUP Parameter values CPG: Access Transport Progress Indicator Progress Description='0000010' SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000010< Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE CPG 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 140 TP number TP_204_019 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 4 in 180 into ATP in the CPG Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 4 in a 180 Ringing a CPG is sent and an Access Transport Parameter is present containing a Progress Indicator #4 ISUP Parameter values CPG: Access Transport Progress Indicator Progress Description='0000100' SIP Parameter values 183: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< or ProgressDescription>0000010< 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000100< Comments Message flows ISUP MGCF Mg IAM INVITE ACM 183 Session Progress CPG 180 Ringing Apply post test routine TP number TP_204_020 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/5 Test Purpose name No mapping of PSTN XML ProgressIndicator 7 in 180 into ATP in the CPG Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 7 in a 180 Ringing, a CPG is sent and an Access Transport Parameter is present containing a Progress Indicator #4 ISUP Parameter values CPG: Access Transport Progress Indicator Progress Description='0000100' SIP Parameter values 183: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< or ProgressDescription>0000010< 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000111< Comments Message flows ISUP MGCF Mg IAM INVITE ACM 183 Session Progress CPG 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 141 TP number TP_204_021 Reference 7.2.3.2.6 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 8 in 180 into Event information in the CPG Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 8 in a 180 Ringing, a CPG is sent and Event information parameter is set to 'In-band information or appropriate pattern is now available' ISUP Parameter values CPG: Event information= In-band information or appropriate pattern is now available SIP Parameter values 180: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0001000< Comments Message flows Mg MGCF ISUP IAM Ti/w1 started ACM Ti/w1 expired INVITE CPG 180 Ringing Apply post test routine TP number TP_204_023 Reference 7.2.3.2.7 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.1/9 Test Purpose name Mapping of P-Early-Media header into Event information parameter in CPG Test Purpose Ensure that on receipt of a 183 Session Progress and a P-Early-Media header is present authorizing early media, a CPG is sent. The Event information parameter is set to 'In-band information or appropriate pattern is now available' ISUP Parameter values CPG: Event information= In-band information or appropriate pattern is now available SIP Parameter values 183: P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE CPG 183 Session Progress Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 142 TP number TP_204_024 Reference 7.2.3.2.7.4 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria NOT PICS 6.2.1/18 Test Purpose name 180 received, coding of Backward call indicator in CPG TMR speech or 3,1 kHz audio Test Purpose IAM with Transmission Medium Requirement indicator=speech or 3,1 kHz received. Ensure that on receipt of a 180 Ringing response, a CPG is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = subscriber free (01) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = incoming echo control device included (1) ISUP Parameter values IAM: Transmission Medium Requirement indicator=speech or 3,1 kHz ACM: Backward call indicator Called party's status indicator = no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE CPG 180 Ringing Apply post test routine TP number TP_204_025 Reference 7.2.3.2.7.4 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.4/2 AND NOT PICS 6.2.1/18 Test Purpose name 180 received, coding of Backward call indicator in CPG TMR 64 kBit/s unrestricted Test Purpose IAM with Transmission Medium Requirement indicator=64 kBit/s unrestricted received. Ensure that on receipt of a 180 Ringing response, an CPG is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = subscriber free (01) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=64 kBit/s unrestricted ACM: Backward call indicator Called party's status indicator = no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE CPG 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 143 TP number TP_204_026 Reference 7.2.3.2.7.4 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria PICS 6.2.4/2 AND PICS 6.2.1/18 Test Purpose name 180 received, coding of Backward call indicator in CPG TMR 64 kBit/s unrestricted Test Purpose IAM with Transmission Medium Requirement indicator=64 kBit/s unrestricted received. Ensure that on receipt of a 180 Ringing response, an CPG is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = subscriber free (01) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = no interworking encountered (0) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part used all the way (1) • ISDN access indicator = terminating access ISDN (1) • Echo control device indicator = incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=64 kBit/s unrestricted ACM: Backward call indicator Called party's status indicator = no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE CPG 180 Ringing Apply post test routine TP number TP_204_027 Reference 7.2.3.2.7.4 TSS reference ISUP-SIP/Basic call/Sending_of_CPG/ Selection criteria Test Purpose name 180 received, coding of Backward call indicator in CPG HLC "Facsimile Group 2/3" Test Purpose IAM with Transmission Medium Requirement indicator=3,1 kHz and High Layer Compatibility= Facsimile Group 2/3 received. Ensure that on receipt of a 180 Ringing response, a CPG is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = subscriber free (01) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=3,1 kHz High Layer Compatibility= Facsimile Group 2/3 ACM: Backward call indicator Called party's status indicator = no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE CPG 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 144
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.2.5 Sending of the Answer Message (ANM)	TP number TP_205_001 Reference 7.2.3.2.8 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria Test Purpose name Sending of ANM when 200 OK INVITE was received Test Purpose Ensure that upon receipt of the first 200 OK (INVITE), if the Address Complete Message (ACM) has already been sent, the SUT sends the Answer Message (ANM) ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine TP number TP_205_002 Reference 7.2.3.2.8 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria NOT PICS 6.2.1/18 Test Purpose name 200 OK received, coding of Backward call indicator in ANM TMR speech or 3,1 kHz audio Test Purpose IAM with Transmission Medium Requirement indicator=speech or 3,1 kHz received. Ensure that on receipt of a 200 OK INVITE final response, an ANM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = Incoming echo control device included (1) ISUP Parameter values IAM: Transmission Medium Requirement indicator=speech or 3,1 kHz ACM: Backward call indicator Called party's status indicator = no indication SIP Parameter values 183: P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE 183 Session Progress ANM 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 145 TP number TP_205_003 Reference 7.2.3.2.8 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria PICS 6.2.4/2 AND NOT PICS 6.2.1/18 Test Purpose name 200 OK received, coding of Backward call indicator in ANM TMR 64 kBit/s unrestricted Test Purpose IAM with Transmission Medium Requirement indicator=64 kBit/s unrestricted received. Ensure that on receipt of a 200 OK INVITE final response, an ANM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = Incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=64 kBit/s unrestricted ACM: Backward call indicator Called party's status indicator = no indication SIP Parameter values 183: P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE 183 Session Progress ANM 200 OK (INVITE) ACK Apply post test routine TP number TP_205_004 Reference 7.2.3.2.8 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria PICS 6.2.4/2 AND PICS 6.2.1/18 Test Purpose name 200 OK received, coding of Backward call indicator in ANM TMR 64 kBit/s unrestricted Test Purpose IAM with Transmission Medium Requirement indicator=64 kBit/s unrestricted received. Ensure that on receipt of a 200 OK INVITE final response, an ANM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = no interworking encountered (0) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part used all the way (1) • ISDN access indicator = terminating access ISDN (1) • Echo control device indicator = Incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=64 kBit/s unrestricted ACM: Backward call indicator Called party's status indicator = no indication SIP Parameter values 183: P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE 183 Session Progress ANM 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 146 TP number TP_205_005 Reference 7.2.3.2.8 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria PICS 6.2.1/9 Test Purpose name 200 OK received, coding of Backward call indicator in ANM HLC "Facsimile Group 2/3" Test Purpose IAM with Transmission Medium Requirement indicator=3,1 kHz and High Layer Compatibility= Facsimile Group 2/3 received. Ensure that on receipt of a 200 OK INVITE final response, an ANM is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = Incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=3,1 kHz High Layer Compatibility= Facsimile Group 2/3 ACM: Backward call indicator Called party's status indicator = no indication SIP Parameter values 183: P-Early-Media: sendonly Comments Message flows ISUP MGCF Mg IAM Ti/w1 started ACM Ti/w1 expired INVITE 183 Session Progress ANM 200 OK (INVITE) ACK Apply post test routine TP number TP_205_006 Reference 7.2.3.2.9.2 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 1 in 200 OK into ATP in the ANM Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 1 in a 200 OK INVITE, an ANM is sent and an Access Transport Parameter is present containing a Progress Indicator #1 ISUP Parameter values ANM: Access Transport Progress Indicator Progress Description='0000001' SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 147 TP number TP_205_007 Reference 7.2.3.2.9.2 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 2 in 200 OK into ATP in the ANM Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 2 in a 200 OK INVITE, an ANM is sent and an Access Transport Parameter is present containing a Progress Indicator #2 ISUP Parameter values ANM: Access Transport Progress Indicator Progress Description='0000010' SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000010< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine TP number TP_205_008 Reference 7.2.3.2.9.2 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 4 in 200 OK into ATP in the ANM Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 4 in a 200 OK INVITE, an ANM is sent and an Access Transport Parameter is present containing a Progress Indicator #4 ISUP Parameter values ANM: Access Transport Progress Indicator Progress Description='0000100' SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000100< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 148 TP number TP_205_009 Reference 7.2.3.2.9.2 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 5 in 200 OK into ATP in the ANM Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 5 in a 200 OK INVITE, an ANM is sent and an Access Transport Parameter is present containing a Progress Indicator #5 ISUP Parameter values IAM: USI=speech or 3,1 kHz audio, USI prime=unrestricted digital info with T/A, TMR=64 kbit/s preferred, TMR prime = speech or 3,1 kHz audio ANM: Access Transport Progress Indicator Progress Description='0000101' SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000101< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine TP number TP_205_010 Reference 7.2.3.2.9.2 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria PICS 6.2.1/5 Test Purpose name No mapping of PSTN XML ProgressIndicator 7 in 200 OK into ATP in the ANM Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 7 in a 200 OK INVITE, an ANM is sent and no Access Transport Parameter is present containing a Progress Indicator #7. The Backward call indicator is set to the following values: ISDN User Part indicator ISDN User Part used all the way ISDN access indicator Terminating access ISDN Interworking indicator no interworking encountered ISUP Parameter values ANM: Access Transport not present Backward call indicator ISDN User Part indicator ISDN User Part used all the way ISDN access indicator Terminating access ISDN Interworking indicator no interworking encountered SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000111< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 149 TP number TP_205_011 Reference 7.2.3.2.9.2 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML HighLayerCompatibility in 200 OK into ATP in ANM Test Purpose Ensure that on receipt of 200 OK INVITE and a PSTN XML HighLayerCompatibility element is present an ANM is sent and a Access Transport Parameter is present containing a High layer compatibility IE and the value is set to the value HLC_VA as indicated in table 6.1.2.5-1 ISUP Parameter values ANM: Access Transport High layer compatibility High layer characteristics identification = HLC_VA SIP Parameter values 200 OK: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_VA< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine Table 6.1.2.5-1: Mapping of PSTN XML HighLayerCharacteristic into ISUP ATP High layer compatibility HLC_VA XML HighLayerCharacteristic DSS1 High layer characteristics identification HLC_VA_1 '0000001' Telephony HLC_VA_2 '0000100' Facsimile Group 2/3 HLC_VA_3 '0100001' Facsimile Group 4 Class I HLC_VA_4 '0100100' Facsimile service Group 4, Classes II and III HLC_VA_5 '0110010' Syntax based Videotex HLC_VA_6 '0110011' International Videotex interworking via gateways or interworking units HLC_VA_7 '0110101' Telex service HLC_VA_8 '1000010' FTAM application HLC_VA_9 '1100000' Videotelephony ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 150 TP number TP_205_012 Reference 7.2.3.2.9.2 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML BearerCapability in 200 OK into ATP in ANM Test Purpose Ensure that on receipt of 200 OK INVITE and a PSTN XML BearerCapability element is present, an ANM is sent and a Access Transport Parameter is present containing a Bearer Capability IE and the value is set to the value ITC_value as indicated in table 6.1.2.5-1 ISUP Parameter values IAM: USI=speech or 3,1 kHz audio, USI prime=unrestricted digital info with T/A, TMR=64 kbit/s preferred, TMR prime = speech or 3,1 kHz audio ANM: Access Transport Bearer Capability Information Transfer Capability = ITC_value SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability> ITC_value < BCoctet4 TransferMode>00< InformationTransferRate>10000< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine Table 6.1.2.5-2: Mapping of PSTN XML BearerCapability into ISUP ATP Bearer Capability ITC_value XML InformationTransferCapability BC Information transfer capability VA_01 '00000' speech VA_02 '10000' 3,1 kHz audio ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 151 TP number TP_205_013 Reference 7.2.3.2.9.3 TSS reference ISUP-SIP/Basic call/Sending_of_ANM/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML BearerCapability into Transmission medium used parameter Test Purpose Ensure that on receipt of a PSTN XML BearerCapability element in a 200 OK INVITE a Transmission Medium Used parameter is present in the sent ANM message. The value of the PSTN XML InformationTransferCapability value TMU_VA_BC is mapped into the value of the Transmission Medium Used parameter TMU_VA_TMU as described in table 6.1.2.5-3 ISUP Parameter values IAM: USI=speech or 3,1 kHz audio, USI prime=unrestricted digital info with T/A, TMR=64 kbit/s preferred, TMR prime = speech or 3,1 kHz audio ANM: TMU: TMU_VA_TMU SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>TMU_VA_BC< …. Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine Table 6.1.2.5-3: Mapping of PSTN XML BearerCapability into ISUP TMU parameter TMU_VA PSTN XML BearerCapability TMU_VA_BC TMU value TMU_VA_TMU TMU_VA_01 '00000' 'speech' TMU_VA_02 '10000' '3,1 kHz audio' TMU_VA_03 '10001' No mapping (see note 1) TMU_VA_04 Not present (see note 2) '3,1 kHz audio' NOTE 1: The value of 'UDITA' is sent when fallback does not occur. NOTE 2: The absence of a PSTN XML attachment indicates that a non ISDN destination is reached.
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.2.6 Sending of the Connect message (CON)	TP number TP_206_001 Reference 7.2.3.2.11 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria Test Purpose name Sending of CON message after 200 OK was received Test Purpose Ensure that on receipt of a 200 OK INVITE and no ACM was sent, a CON message is sent ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 152 TP number TP_206_002 Reference 7.2.3.2.11.1 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria NOT PICS 6.2.1/18 Test Purpose name 200 OK received, coding of Backward call indicator in CON TMR speech or 3,1 kHz audio Test Purpose IAM with Transmission Medium Requirement indicator=speech or 3,1 kHz received. Ensure that on receipt of a 200 OK INVITE final response, a CON is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = Incoming echo control device included (1) ISUP Parameter values IAM: Transmission Medium Requirement indicator=speech or 3,1 kHz CON: Backward call indicator Called party's status indicator = no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine TP number TP_206_003 Reference 7.2.3.2.11.1 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria PICS 6.2.4/2 AND NOT PICS 6.2.1/18 Test Purpose name 200 OK received, coding of Backward call indicator in CON TMR 64 kBit/s unrestricted Test Purpose IAM with Transmission Medium Requirement indicator=64 kBit/s unrestricted received. Ensure that on receipt of a 200 OK INVITE final response, a CON is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = Incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=64 kBit/s unrestricted CON: Backward call indicator Called party's status indicator = no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 153 TP number TP_206_004 Reference 7.2.3.2.11.1 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria PICS 6.2.4/2 AND PICS 6.2.1/18 Test Purpose name 200 OK received, coding of Backward call indicator in ANM TMR 64 kBit/s unrestricted Test Purpose IAM with Transmission Medium Requirement indicator=64 kBit/s unrestricted received. Ensure that on receipt of a 200 OK INVITE final response, an CON is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = no interworking encountered (0) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part used all the way (1) • ISDN access indicator = terminating access ISDN (1) • Echo control device indicator = Incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=64 kBit/s unrestricted CON: Backward call indicator Called party's status indicator = no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine TP number TP_206_005 Reference 7.2.3.2.11.1 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria Test Purpose name 200 OK received, coding of Backward call indicator in CON HLC "Facsimile Group 2/3" Test Purpose IAM with Transmission Medium Requirement indicator=3,1 kHz and High Layer Compatibility= Facsimile Group 2/3 received. Ensure that on receipt of a 200 OK INVITE final response, an CON is sent and the Backward call indicator is set to the following values: • Charge indicator = charge (10) • Called party's status indicator = no indication (00) • Called party's category indicator = no indication (00) • End-to-end method indicator = no end-to-end method available (00) • Interworking indicator = interworking encountered (1) • End-to-end information indicator = no end-to-end information available (0) • ISDN user part/BICC indicator = ISDN user part not used all the way (0) • ISDN access indicator = terminating access non-ISDN (0) • Echo control device indicator = Incoming echo control device not included (0) ISUP Parameter values IAM: Transmission Medium Requirement indicator=3,1 kHz High Layer Compatibility= Facsimile Group 2/3 CON: Backward call indicator Called party's status indicator = no indication SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 154 TP number TP_206_006 Reference 7.2.3.2.11.2 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 1 in 200 OK into ATP in the CON Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 1 in a 200 OK INVITE, a CON is sent and an Access Transport Parameter is present containing a Progress Indicator #1 ISUP Parameter values CON: Access Transport Progress Indicator Progress Description='0000001' SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine TP number TP_206_007 Reference 7.2.3.2.11.2 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 2 in 200 OK into ATP in the CON Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 2 in a 200 OK INVITE, a CON is sent and an Access Transport Parameter is present containing a Progress Indicator #2 ISUP Parameter values CON: Access Transport Progress Indicator Progress Description='0000010' SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000010< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 155 TP number TP_206_008 Reference 7.2.3.2.11.2 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 4 in 200 OK into ATP in the CON Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 4 in a 200 OK INVITE, a CON is sent and an Access Transport Parameter is present containing a Progress Indicator #4 ISUP Parameter values CON: Access Transport Progress Indicator Progress Description='0000100' SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000100< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine TP number TP_206_009 Reference 7.2.3.2.11.2 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 5 in 200 OK into ATP in the CON Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 5 in a 200 OK INVITE, a CON is sent and an Access Transport Parameter is present containing a Progress Indicator #5 ISUP Parameter values IAM: USI=speech or 3,1 kHz audio, USI prime=unrestricted digital info with T/A, TMR=64 kbit/s preferred, TMR prime = speech or 3,1 kHz audio CON: Access Transport Progress Indicator Progress Description='0000101' SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000101< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 156 TP number TP_206_010 Reference 7.2.3.2.11.2 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria PICS 6.2.1/5 Test Purpose name No mapping of PSTN XML ProgressIndicator 7 in 200 OK into ATP in the CON Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 7 in a 200 OK INVITE, a CON is sent and no Access Transport Parameter is present containing a Progress Indicator #7. The Backward call indicator is set to the following values: ISDN User Part indicator ISDN User Part used all the way ISDN access indicator Terminating access non-ISDN Interworking indicator no interworking encountered ISUP Parameter values CON: Access Transport not present Backward call indicator ISDN User Part indicator ISDN User Part used all the way ISDN access indicator Terminating access non-ISDN Interworking indicator no interworking encountered SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000111< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine TP number TP_206_011 Reference 7.2.3.2.11.2 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML HighLayerCompatibility in 200 OK into ATP in CON Test Purpose Ensure that on receipt of 200 OK INVITE and a PSTN XML HighLayerCompatibility element is present a CON is sent and a Access Transport Parameter is present containing a High layer compatibility IE and the value is set to the value HLC_VA as indicated in table 6.1.2.5-1 ISUP Parameter values CON: Access Transport High layer compatibility High layer characteristics identification = HLC_VA SIP Parameter values 200 OK: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_VA< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 157 TP number TP_206_012 Reference 7.2.3.2.11.2 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML BearerCapability in 200 OK into ATP in CON Test Purpose Ensure that on receipt of 200 OK INVITE and a PSTN XML BearerCapability element is present, a CON is sent and a Access Transport Parameter is present containing a Bearer Capability IE and the value is set to the value ITC_value as indicated in table 6.1.2.5-1 ISUP Parameter values CON: Access Transport Bearer Capability Information Transfer Capability = ITC_value SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability> ITC_value < BCoctet4 TransferMode>00< InformationTransferRate>10000< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine TP number TP_206_013 Reference 7.2.3.2.11 TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML BearerCapability into Transmission medium used parameter Test Purpose Ensure that on receipt of a PSTN XML BearerCapability element in a 200 OK INVITE a Transmission Medium Used parameter is present in the sent CON message. The value of the PSTN XML InformationTransferCapability value TMU_VA_BC is mapped into the value of the Transmission Medium Used parameter TMU_VA_TMU as described in table 6.1.2.5-3 ISUP Parameter values IAM: USI=speech or 3,1 kHz audio, USI prime=unrestricted digital info with T/A, TMR=64 kbit/s preferred, TMR prime = speech or 3,1 kHz audio CON: TMU: TMU_VA_TMU SIP Parameter values 200 OK: <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability>TMU_VA_BC< …. Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CON 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 158 TP number TP_206_014 Reference 7.2.3.2.11A TSS reference ISUP-SIP/Basic call/Sending_of_CON/ Selection criteria PICS 6.2.1/19 Test Purpose name Receipt of a reINVITE request Test Purpose Ensure that on receipt of a reINVITE received from the SIP network containing a Call-Info header, the SUT instruct the MGW to send the associated media to the PSTN leg of the communication ISUP Parameter values SIP Parameter values INVITE2: Call-Info: <media resource URL> Comments Message flows ISUP MGCF Mg IAM INVITE1 ACM 180 Ringing ANM 200 OK INVITE ACK INVITE 200 OK INVITE2 ACK media Apply post test routine
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.2.7 Receipt of Status Codes 3xx, 4xx, 5xx or 6xx	TP number TP_207_001 Reference 7.2.3.2.12 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria Test Purpose name Mapping of unsuccessful final responses to ISUP/BICC Release messages Test Purpose Ensure that on receipt of an unsuccessful final response SIP_Response before an early dialogue is established, a Release message Cause value REL_cause is sent on the ISUP/BICC leg of the connection. The mapping is according the table 6.1.2.7-1. The location value in the REL message is set to 'network beyond interworking point' ISUP Parameter values REL: Cause = REL_cause SIP Parameter values SIP_Response Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying REL SIP_Response RLC ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 159 Table 6.1.2.7-1: Received status codes on SIP side of O-MGCF mapping to REL SIP_Response_VA ←REL (cause code) REL_cause ←4xx/5xx/6xx SIP Message SIP_Response VA_01 111 (protocol error, unspecified) 400 Bad Request VA_02 127 (interworking unspecified) 401 Unauthorized VA_03 127 (interworking unspecified) 402 Payment Required VA_04 79 (Service or option not implemented, unspecified) 403 Forbidden VA_05 1 (Unallocated number) 404 Not Found VA_06 127 (interworking unspecified) 405 Method Not Allowed VA_07 127 (interworking unspecified) 406 Not Acceptable VA_08 127 (interworking unspecified) 407 Proxy authentication required VA_09 102 (recovery on timer expiry) 408 Request Timeout VA_10 22 (Number changed) 410 Gone VA_11 127 (interworking unspecified) 413 Request Entity too long VA_12 111 (protocol error, unspecified) 414 Request-URI too long VA_13 127 (interworking unspecified) 415 Unsupported Media type VA_14 111 (protocol error, unspecified) 416 Unsupported URI scheme VA_15 79 (Service or option not implemented, unspecified) 417 Unknown Resource-Priority VA_16 111 (protocol error, unspecified) 420 Bad Extension VA_17 111 (protocol error, unspecified) 421 Extension required VA_18 31 (Normal, unspecified) 422 Session Interval Too Small VA_19 127 (interworking unspecified) 423 Interval Too Brief VA_20 24 (call rejected due to ACR supplementary service) 433 Anonymity Disallowed. VA_21 20 Subscriber absent 480 Temporarily Unavailable VA_22 127 (interworking unspecified) 440 Max-Breadth Exceeded VA_23 127 (interworking unspecified) 481 Call/Transaction does not exist VA_24 127 (interworking unspecified) 482 Loop detected VA_25 25 (Exchange routing error) 483 Too many hops VA_26 28 (Invalid Number format) 484 Address Incomplete VA_27 Cause value No. 1 (unallocated (unassigned) number) 485 Ambiguous VA_28 17 (User busy) 486 Busy Here VA_29 127 (Interworking unspecified) or not interworked 487 Request terminated VA_30 50 (requested facility no subscribed) 488 Not acceptable here VA_31 127 (interworking unspecified) 493 Undecipherable VA_32 127 (interworking unspecified) 500 Server Internal error VA_33 79 (service or option not implemented) 501 Not implemented VA_34 27 (Destination out of order) 502 Bad Gateway VA_35 127 (interworking unspecified) 503 Service Unavailable VA_36 102 (Recovery on timer expiry) 504 Server timeout VA_37 127 (interworking unspecified) 505 Version not supported VA_38 127 (interworking unspecified) 513 Message too large VA_39 127 (interworking unspecified) 580 Precondition failure VA_40 17 (User busy) 600 Busy Everywhere VA_41 21 (Call rejected) 603 Decline VA_42 2 (No route to specified transit network) 604 Does not exist anywhere VA_43 88 (incompatible destination) 606 Not acceptable ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 160 TP number TP_207_002 Reference 7.2.3.2.12 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria Test Purpose name Mapping of unsuccessful final responses to REL after 180 was received Test Purpose Ensure that on receipt of an unsuccessful final response SIP_Response after an early dialogue was established due to the receipt of a 180 Ringing, a REL is sent. The Cause value of the REL is mapped from the received status code as indicated in table 6.1.2.7-2. The location value in the REL message is set to 'network beyond interworking point' ISUP Parameter values REL: Cause = REL_cause SIP Parameter values SIP_Response Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying 180 Ringing REL SIP_Response RLC ACK TP number TP_207_003 Reference 7.2.3.2.12 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria Test Purpose name Mapping of unsuccessful final responses to REL after 181 was received Test Purpose Ensure that on receipt of an unsuccessful final response SIP_Response after an early dialogue was established due to the receipt of a 181 Call is Being Forwarded, a REL is sent. The Cause value of the REL is mapped from the received status code as indicated in table 6.1.2.7-2. The location value in the REL message is set to 'network beyond interworking point' ISUP Parameter values REL: Cause = REL_cause SIP Parameter values SIP_Response Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying 181 Call is Being Forwarded REL SIP_Response RLC ACK TP number TP_207_004 Reference 7.2.3.2.12 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria Test Purpose name Mapping of unsuccessful final responses to REL after 183 was received Test Purpose Ensure that on receipt of an unsuccessful final response SIP_Response after an early dialogue was established due to the receipt of a 183 Session Progress, a REL is sent. The Cause value of the REL is mapped from the received status code as indicated in table 6.1.2.7-2. The location value in the REL message is set to 'network beyond interworking point' ISUP Parameter values REL: Cause = REL_cause SIP Parameter values SIP_Response Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying 183 Session Progress REL SIP_Response RLC ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 161 Table 6.1.2.7-2: Received status codes on SIP side of O-MGCF mapping to REL SIP_Response_VA ←REL (cause code) REL_cause ←4xx/5xx/6xx SIP Message SIP_Response VA_01 111 (protocol error, unspecified) 400 Bad Request VA_02 127 (interworking unspecified) 402 Payment Required VA_03 79 (Service or option not implemented, unspecified) 403 Forbidden VA_04 127 (interworking unspecified) 406 Not Acceptable VA_05 102 (recovery on timer expiry) 408 Request Timeout VA_06 22 (Number changed) 410 Gone VA_07 127 (interworking unspecified) 423 Interval Too Brief VA_08 20 Subscriber absent 480 Temporarily Unavailable VA_09 127 (interworking unspecified) 481 Call/Transaction does not exist VA_10 127 (interworking unspecified) 482 Loop detected VA_11 25 (Exchange routing error) 483 Too many hops VA_12 1 (Unallocated (unassigned) number) 485 Ambiguous VA_13 50 (requested facility no subscribed) 488 Not acceptable here VA_14 127 (interworking unspecified) 500 Server Internal error VA_15 79 (service or option not implemented) 501 Not implemented VA_16 27 (Destination out of order) 502 Bad Gateway VA_17 102 (Recovery on timer expiry) 504 Server timeout VA_18 21 (Call rejected) 603 Decline VA_19 2 (No route to specified transit network) 604 Does not exist anywhere VA_20 88 (incompatible destination) 606 Not acceptable TP number TP_207_005 Reference 7.2.3.2.12 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria Test Purpose name Mapping of Reason header into Cause value of REL Test Purpose Ensure that on receipt of an unsuccessful final response SIP_Response and a Reason header is present set to cause SIP_cause, this value is used in the corresponding REL message. The mapping is indicated in table 6.1.2.7-3. The location value in the REL message is set to 'network beyond interworking point' ISUP Parameter values REL: Cause= SIP_cause SIP Parameter values SIP_Response: Reason: cause= SIP_cause Comments The use of different cause values in the Reason header is recommended. The cause value should be adequate to the response code. Message flows ISUP MGCF Mg IAM INVITE 100 Trying REL SIP_Response RLC ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 162 Table 6.1.2.7-3: Received status codes on SIP side of O-MGCF mapping to REL SIP_Response_VA ←REL (cause code) SIP_cause ←4xx/5xx/6xx SIP Message SIP_Response VA_01 SIP_cause 400 Bad Request VA_02 SIP_cause 401 Unauthorized VA_03 SIP_cause 402 Payment Required VA_04 SIP_cause 403 Forbidden VA_05 SIP_cause 404 Not Found VA_06 SIP_cause 405 Method Not Allowed VA_07 SIP_cause 406 Not Acceptable VA_08 SIP_cause 407 Proxy authentication required VA_09 SIP_cause 408 Request Timeout VA_10 SIP_cause 410 Gone VA_11 SIP_cause 413 Request Entity too long VA_12 SIP_cause 414 Request-URI too long VA_13 SIP_cause 415 Unsupported Media type VA_14 SIP_cause 416 Unsupported URI scheme VA_15 SIP_cause 417 Unknown Resource-Priority VA_16 SIP_cause 420 Bad Extension VA_17 SIP_cause 421 Extension required VA_18 SIP_cause 422 Session Interval Too Small VA_19 SIP_cause 423 Interval Too Brief VA_20 SIP_cause 433 Anonymity Disallowed. VA_21 SIP_cause 440 Max-Breadth Exceeded VA_22 SIP_cause 480 Temporarily Unavailable VA_223 SIP_cause 481 Call/Transaction does not exist VA_24 SIP_cause 482 Loop detected VA_25 SIP_cause 483 Too many hops VA_26 SIP_cause 484 Address Incomplete VA_27 SIP_cause 485 Ambiguous VA_28 SIP_cause 486 Busy Here VA_29 SIP_cause 487 Request terminated VA_30 SIP_cause 488 Not acceptable here VA_31 SIP_cause 493 Undecipherable VA_32 SIP_cause 500 Server Internal error VA_33 SIP_cause 501 Not implemented VA_34 SIP_cause 502 Bad Gateway VA_35 SIP_cause 503 Service Unavailable VA_36 SIP_cause 504 Server timeout VA_37 SIP_cause 505 Version not supported VA_38 SIP_cause 513 Message too large VA_39 SIP_cause 580 Precondition failure VA_40 SIP_cause 600 Busy Everywhere VA_41 SIP_cause 603 Decline VA_42 SIP_cause 604 Does not exist anywhere VA_43 SIP_cause 606 Not acceptable ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 163 TP number TP_207_006 Reference 7.2.3.2.12 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 1 in an unsuccessful final response into ATP in the REL Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 1 in an unsuccessful final response as indicated in table 6.1.2.7-4, a REL is sent and an Access Transport Parameter is present containing a Progress Indicator #1 ISUP Parameter values REL: Access Transport Progress Indicator Progress Description='0000001' SIP Parameter values SIP_Response: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying REL SIP_Response RLC ACK TP number TP_207_007 Reference 7.2.3.2.12 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 2 in an unsuccessful final response into ATP in the REL Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 2 in an unsuccessful final response as indicated in table 6.1.2.7-4, a REL is sent and an Access Transport Parameter is present containing a Progress Indicator #2 ISUP Parameter values REL: Access Transport Progress Indicator Progress Description='0000010' SIP Parameter values SIP_Response: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000010< Comments Message flows Mg MGCF ISUP IAM INVITE 100 Trying REL SIP_Response RLC ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 164 TP number TP_207_008 Reference 7.2.3.2.12 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 4 in an unsuccessful final response into ATP in the REL Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 4 in an unsuccessful final response as indicated in table 6.1.2.7-4, a REL is sent and an Access Transport Parameter is present containing a Progress Indicator #4 ISUP Parameter values REL: Access Transport Progress Indicator Progress Description='0000100' SIP Parameter values SIP_Response: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000100< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying REL SIP_Response RLC ACK TP number TP_207_009 Reference 7.2.3.2.12 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 5 in an unsuccessful final response into ATP in the REL Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 5 in an unsuccessful final response as indicated in table 6.1.2.7-4, a REL is sent and an Access Transport Parameter is present containing a Progress Indicator #5 ISUP Parameter values IAM: USI=speech or 3,1 kHz audio, USI prime=unrestricted digital info with T/A, TMR=64 kbit/s preferred, TMR prime = speech or 3,1 kHz audio REL: Access Transport Progress Indicator Progress Description='0000101' SIP Parameter values SIP_Response: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000101< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying REL SIP_Response RLC ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 165 Table 6.1.2.7-4: Received status codes on SIP side of O-MGCF mapping to REL SIP_Response_VA ←4xx/5xx/6xx SIP Message SIP_Response VA_01 400 Bad Request VA_02 403 Forbidden VA_03 406 Not Acceptable VA_04 408 Request Timeout VA_05 410 Gone VA_06 480 Temporarily Unavailable VA_07 488 Not acceptable here VA_08 500 Server Internal error VA_09 502 Bad Gateway VA_10 504 Server timeout VA_11 603 Decline VA_12 606 Not acceptable TP number TP_207_010 Reference 7.2.3.2.12 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML HighLayerCompatibility in an unsuccessful final response into ATP in REL Test Purpose Ensure that on receipt of an unsuccessful final response and a PSTN XML HighLayerCompatibility element is present a REL is sent and a Access Transport Parameter is present containing a High layer compatibility IE and the value is set to the value HLC_VA as indicated in table 6.1.2.5-1 ISUP Parameter values REL: Access Transport High layer compatibility High layer characteristics identification = HLC_VA SIP Parameter values SIP_Response: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_VA< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying REL SIP_Response RLC ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 166 TP number TP_207_011 Reference 7.2.3.2.12 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML BearerCapability in an unsuccessful final response into ATP in REL Test Purpose Ensure that on receipt of an unsuccessful final response and a PSTN XML BearerCapability element is present, a REL is sent and a Access Transport Parameter is present containing a Bearer Capability IE and the value is set to the value ITC_value as indicated in table 6.1.2.5-2 ISUP Parameter values REL: Access Transport Bearer Capability Information Transfer Capability = ITC_value SIP Parameter values SIP_Response: <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability> ITC_value < BCoctet4 TransferMode>00< InformationTransferRate>10000< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying REL SIP_Response RLC ACK TP number TP_207_012 Reference 7.2.3.2.12 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria PICS 6.2.1/20 Test Purpose name Play media provided in an Error-Info header received in an unsuccessful final response Test Purpose Ensure that the SUT instructs the MGW to play out media associated with an URL present in an Error-Info header received in an unsuccessful final response as indicated in table 6.1.2.7-4 ISUP Parameter values SIP Parameter values SIP_Response: Error-Info: <Media re source URL> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying SIP_Response ACK media Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 167 TP number TP_207_013 Reference 7.2.3.2.12.1, 7.2.3.3 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria PICS 6.2.3/2 Test Purpose name Handling of 404 and 484 responses after sending of INVITE Test Purpose Ensure that on receipt of a 404 Not Found or 484 Address Incomplete responses after sending of INVITE without determining the end of address signalling, timer Ti/w3. After expiry of T i/w3 a REL is sent, the Cause parameter value is set to #28 ISUP Parameter values REL: Cause=28 SIP Parameter values Comments Message flows ISUP MGCF Mg IAM Ti/w2 started INVITE Ti/w3 started 484 Address Incomplete ACK SAM Ti/w2 started INVITE Ti/w3 started 484 Address Incomplete ACK REL Ti/w3 expired RLC TP number TP_207_014 Reference 7.2.3.2.19 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria Test Purpose name Handling of 3xx responses after sending of INVITE Test Purpose Ensure that on receipt of a 3xx final responses as indicated in table 6.1.2.7-5, an ISUP REL is sent. The Cause value in the sent REL is set to value 127 ISUP Parameter values REL: Cause=127 SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE REL 3xx_VA RLC ACK Table 6.1.2.7-5: Mapping of 3xx final responses in ISUP REL 3xx_VA XML HighLayerCharacteristic 3xx_VA_01 300 Multiple Choices 3xx_VA_02 301 Moved Permanently 3xx_VA_03 302 Moved Temporarily 3xx_VA_04 305 Use Proxy 3xx_VA_05 380 Alternative Service ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 168 TP number TP_207_015 Reference 7.2.3.2.17.2 TSS reference ISUP-SIP/Basic call/Receipt_of_4xx-5xx-6xx/ Selection criteria PICS 6.2.1/3 Test Purpose name 580 response to an UPDATE within an early dialog Test Purpose Ensure that on receipt of a 580 Precondition Failure final response after an UPDATE request was sent in the early dialogue, a REL is sent and the Cause value is set to 127 ISUP Parameter values IAM: Nature of connection indicator= continuity check required on this circuit or continuity check performed on previous circuit COT: Continuity indicator=continuity check successful REL: Cause=127 SIP Parameter values INVITE: Supported: precondition, 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos none remote sendrecv 183: Require: 100rel SDP a=curr:qos local none a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv a=conf:qos remote sendrecv UPDATE: SDP a=curr:qos local sendrecv a=curr:qos remote none a=des:qos mandatory local sendrecv a=des:qos mandatory remote sendrecv Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying 183 Session Progress PRACK 200 OK (PRACK) COT UPDATE REL 580 Precondition Failure RLC Apply post test routine
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.2.8 Receipt of a BYE	TP number TP_208_001 Reference 7.2.3.2.13 TSS reference ISUP-SIP/Basic call/Receipt_of_BYE/ Selection criteria Test Purpose name BYE received, REL is sent Test Purpose Ensure that on receipt of a BYE message and no reason header is present, a REL is sent. The Cause value of the REL is set to #16, the location is set to 'network beyond interworking point' ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 169 TP number TP_208_002 Reference 7.2.3.2.13 TSS reference ISUP-SIP/Basic call/Receipt_of_BYE/ Selection criteria Test Purpose name BYE received a Reason header is present, REL Cause derived from the Reason cause value Test Purpose Ensure that on receipt of a BYE request and a Reason header is present, a REL is sent. The Cause parameter is derived from cause parameter in the Reason header ISUP Parameter values REL: Cause=<Reason cause> SIP Parameter values BYE: Reason: cause Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) TP number TP_208_003 Reference 7.2.3.2.13 TSS reference ISUP-SIP/Basic call/Receipt_of_BYE/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 1 in a BYE into ATP in the REL Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 1 in a BYE request, a REL is sent and an Access Transport Parameter is present containing a Progress Indicator #1 ISUP Parameter values REL: Access Transport Progress Indicator Progress Description='0000001' SIP Parameter values BYE: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 170 TP number TP_208_004 Reference 7.2.3.2.13 TSS reference ISUP-SIP/Basic call/Receipt_of_BYE/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 2 in a BYE into ATP in the REL Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 2 in a BYE request, a REL is sent and an Access Transport Parameter is present containing a Progress Indicator #2 ISUP Parameter values REL: Access Transport Progress Indicator Progress Description='0000010' SIP Parameter values BYE: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000010< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) TP number TP_208_005 Reference 7.2.3.2.13 TSS reference ISUP-SIP/Basic call/Receipt_of_BYE/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 4 in a BYE into ATP in the REL Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 4 in a BYE request, a REL is sent and an Access Transport Parameter is present containing a Progress Indicator #4 ISUP Parameter values REL: Access Transport Progress Indicator Progress Description='0000100' SIP Parameter values BYE: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000100< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 171 TP number TP_208_006 Reference 7.2.3.2.13 TSS reference ISUP-SIP/Basic call/Receipt_of_BYE/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML ProgressIndicator 5 in a BYE into ATP in the REL Test Purpose Ensure that on receipt of a PSTN XML ProgressIndicator value 5 in a BYE request, a REL is sent and an Access Transport Parameter is present containing a Progress Indicator #5 ISUP Parameter values IAM: USI=speech or 3,1 kHz audio, USI prime=unrestricted digital info with T/A, TMR=64 kbit/s preferred, TMR prime = speech or 3,1 kHz audio REL: Access Transport Progress Indicator Progress Description='0000101' SIP Parameter values BYE: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000101< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) TP number TP_208_007 Reference 7.2.3.2.13 TSS reference ISUP-SIP/Basic call/Receipt_of_BYE/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML HighLayerCompatibility in a BYE into ATP in REL Test Purpose Ensure that on receipt of BYE request and a PSTN XML HighLayerCompatibility element is present a REL is sent and a Access Transport Parameter is present containing a High layer compatibility IE and the value is set to the value HLC_VA as indicated in table 6.1.2.5-1 ISUP Parameter values REL: Access Transport High layer compatibility High layer characteristics identification = HLC_VA SIP Parameter values BYE: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_VA< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 172 TP number TP_208_008 Reference 7.2.3.2.13 TSS reference ISUP-SIP/Basic call/Receipt_of_BYE/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of PSTN XML BearerCapability in a BYE into ATP in REL Test Purpose Ensure that on receipt of a BYE request and a PSTN XML BearerCapability element is present, a REL is sent and a Access Transport Parameter is present containing a Bearer Capability IE and the value is set to the value ITC_value as indicated in table 6.1.2.5-2 ISUP Parameter values REL: Access Transport Bearer Capability Information Transfer Capability = ITC_value SIP Parameter values BYE: <?xml version="1.0" encoding="utf-8"?> PSTN BearerCapability BCoctet3 CodingStandard>00< InformationTransferCapability> ITC_value < BCoctet4 TransferMode>00< InformationTransferRate>10000< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE)
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.2.9 Receipt of the Release Message	TP number TP_209_001 Reference 7.2.3.2.14 TSS reference ISUP-SIP/Basic call/Receipt_of_REL/ Selection criteria Test Purpose name REL received before an early dialogue was established, a CANCEL is sent Test Purpose Ensure that on receipt of a REL message before an early dialogue was established, a CANCEL request is sent and the Reason header is present, the cause value is derived from the Cause value in the received REL ISUP Parameter values REL: Cause value SIP Parameter values CANCEL: Reason: cause=<Cause value> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying REL CANCEL RLC 200 OK (CANCEL) 487 Request Terminated ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 173 TP number TP_209_002 Reference 7.2.3.2.14 TSS reference ISUP-SIP/Basic call/Receipt_of_REL/ Selection criteria Test Purpose name REL received after an early dialogue with 180 was established, a CANCEL is sent Test Purpose Ensure that on receipt of a REL message after an early dialogue due to a 180 Ringing response was established, a CANCEL request is sent and the Reason header is present, the cause value is derived from the Cause value in the received REL ISUP Parameter values REL: Cause value SIP Parameter values CANCEL: Reason: cause=<Cause value> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing REL CANCEL RLC 200 OK (CANCEL) 487 Request Terminated ACK TP number TP_209_003 Reference 7.2.3.2.14 TSS reference ISUP-SIP/Basic call/Receipt_of_REL/ Selection criteria Test Purpose name REL received after an early dialogue with 181 was established, a CANCEL is sent Test Purpose Ensure that on receipt of a REL message after an early dialogue due to a 181 Call is Being Forwarded response was established, a CANCEL request is sent and the Reason header is present, the cause value is derived from the Cause value in the received REL ISUP Parameter values REL: Cause value SIP Parameter values CANCEL: Reason: cause=<Cause value> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 181 Being forwarded REL CANCEL RLC 200 OK (CANCEL) 487 Request Terminated ACK TP number TP_209_004 Reference 7.2.3.2.14 TSS reference ISUP-SIP/Basic call/Receipt_of_REL/ Selection criteria Test Purpose name Test Purpose REL received after an early dialogue with 182 was established, a CANCEL is sent ISUP Parameter values Ensure that on receipt of a REL message after an early dialogue due to a 182 Queued response was established, a CANCEL request is sent and the Reason header is present, the cause value is derived from the Cause value in the received REL SIP Parameter values REL: Cause value Comments CANCEL: Reason: cause=<Cause value> Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 182 Queued REL CANCEL RLC 200 OK (CANCEL) 487 Request Terminated ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 174 TP number TP_209_005 Reference 7.2.3.2.14 TSS reference ISUP-SIP/Basic call/Receipt_of_REL/ Selection criteria Test Purpose name REL received after an early dialogue with 183 was established, a CANCEL is sent Test Purpose Ensure that on receipt of a REL message after an early dialogue due to a 183 Session Progress response was established, a CANCEL request is sent and the Reason header is present, the cause value is derived from the Cause value in the received REL ISUP Parameter values REL: Cause value SIP Parameter values CANCEL: Reason: cause=<Cause value> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 183 Session Progress REL CANCEL RLC 200 OK (CANCEL) 487 Request Terminated ACK TP number TP_209_006 Reference 7.2.3.2.14 TSS reference ISUP-SIP/Basic call/Receipt_of_REL/ Selection criteria Test Purpose name REL received in the confirmed dialogue a BYE is sent Test Purpose Ensure that on receipt of a REL message in the confirmed dialogue, a BYE request is sent and the Reason header is present, the cause value is derived from the Cause value in the received REL ISUP Parameter values REL: Cause value SIP Parameter values BYE: Reason: cause=<Cause value> Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 175 TP number TP_209_007 Reference 7.2.3.2.14 TSS reference ISUP-SIP/Basic call/Receipt_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of REL ATP Progress Indicator #1 into PSTN XML ProgressIndicator #1 in the BYE Test Purpose Ensure that on receipt of a REL message and a ATP containing a Progress Indicator #2 in the confirmed dialogue, a BYE request is sent and a PSTN XML ProgressIndicator is present, the ProgressDescription is set to #1 ISUP Parameter values REL: Access Transport Progress Indicator Progress Description='0000001' SIP Parameter values BYE: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000001< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) TP number TP_209_008 Reference 7.2.3.2.14 TSS reference ISUP-SIP/Basic call/Receipt_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of REL ATP Progress Indicator #2 into PSTN XML ProgressIndicator #2 in the BYE Test Purpose Ensure that on receipt of a REL message and a ATP containing a Progress Indicator #2 in the confirmed dialogue, a BYE request is sent and a PSTN XML ProgressIndicator is present, the ProgressDescription is set to #2 ISUP Parameter values REL: Access Transport Progress Indicator Progress Description='0000010' SIP Parameter values BYE: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000010< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 176 TP number TP_209_009 Reference 7.2.3.2.14 TSS reference ISUP-SIP/Basic call/Receipt_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of REL ATP Progress Indicator #4 into PSTN XML ProgressIndicator #4 in the BYE Test Purpose Ensure that on receipt of a REL message and a ATP containing a Progress Indicator #4 in the confirmed dialogue, a BYE request is sent and a PSTN XML ProgressIndicator is present, the ProgressDescription is set to #4 ISUP Parameter values REL: Access Transport Progress Indicator Progress Description='0000100' SIP Parameter values BYE: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000100< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) TP number TP_209_010 Reference 7.2.3.2.14 TSS reference ISUP-SIP/Basic call/Receipt_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of REL ATP Progress Indicator #5 into PSTN XML ProgressIndicator #5 in the BYE Test Purpose Ensure that on receipt of a REL message and an ATP containing a Progress Indicator #5 in the confirmed dialogue, a BYE request is sent and a PSTN XML ProgressIndicator is present, the ProgressDescription is set to #5 ISUP Parameter values REL: Access Transport Progress Indicator Progress Description='0000101' SIP Parameter values BYE: <?xml version="1.0" encoding="utf-8"?> PSTN ProgressIndicator ProgressOctet4 ProgressDescription>0000101< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 177 TP number TP_209_011 Reference 7.2.3.2.14 TSS reference ISUP-SIP/Basic call/Receipt_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of REL ATP High layer compatibility into PSTN XML HighLayerCompatibility in the BYE Test Purpose Ensure that on receipt of a REL message and an ATP containing a High layer compatibility IE in the confirmed dialogue, a BYE request is sent and a PSTN XML HighLayerCompatibility is present, the HighLayerCharacteristics is set to HLC_VA as indicated in table 6.1.2.1-4 ISUP Parameter values REL: Access Transport High layer compatibility High layer characteristics identification = HLC_VA SIP Parameter values BYE: PSTN XML MIME body <?xml version="1.0" encoding="utf-8"?> PSTN HighLayerCompatibility HLOctet3 CodingStandard>00< Interpretation>100< PresentationMethod>01< HLOctet4 HighLayerCharacteristics>HLC_VA< Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 178 TP number TP_209_012 Reference 7.2.3.2.14 TSS reference ISUP-SIP/Basic call/Receipt_of_REL/ Selection criteria PICS 6.2.1/5 Test Purpose name Mapping of REL ATP Low Layer Compatibility into PSTN XML LowLayerCompatibilityin the BYE Test Purpose Ensure that on receipt of a REL message and an ATP containing a Low Layer Compatibility IE in the confirmed dialogue, a BYE request is sent and a PSTN XML LowLayerCompatibility is present, the InformationTransferCapability is set to ITC_value as indicated in table 6.1.1.4-4 ISUP Parameter values REL: Access Transport Low Layer Compatibility Information Transfer Capability = ITC_value SIP Parameter values BYE: <?xml version="1.0" encoding="utf-8"?> PSTN LowLayerCompatibility LLoctet3 CodingStandard>00< InformationTransferCapability>ITC_value< LLoctet4 TransferMode>00< InformationTransferRate>10000< Comments Message flows Mg MGCF ISUP IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK REL BYE RLC 200 OK (BYE)
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.2.10 Receipt of RSC, GRS or CGB (H/W oriented)	TP number TP_210_001 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of RSC before an early dialogue was established Test Purpose Ensure that on receipt of a RSC before an early dialogue is established, a CANCEL request is sent containing a Reason header. The SUT received a 487 Request Terminated and sends an ACK request ISUP Parameter values SIP Parameter values CANCEL: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying RSC CANCEL RLC 200 OK (CANCEL) 487 Request Terminated ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 179 TP number TP_210_002 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of RSC after an early dialogue with 180 was established Test Purpose Ensure that on receipt of a RSC after an early dialogue with receipt of a 180 Ringing provisional response is established, a CANCEL request is sent containing a Reason header. The SUT receives a 487 Request Terminated and sends an ACK request ISUP Parameter values SIP Parameter values CANCEL: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing RSC CANCEL RLC 200 OK (CANCEL) 487 Request Terminated ACK TP number TP_210_003 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of RSC after an early dialogue with 181 was established Test Purpose Ensure that on receipt of a RSC after an early dialogue with receipt of a 181 Being forwarded provisional response is established, a CANCEL request is sent containing a Reason header. The SUT receives a 487 Request Terminated and sends an ACK request ISUP Parameter values SIP Parameter values CANCEL: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE 181 Being forwarded RSC CANCEL RLC 200 OK (CANCEL) 487 Request Terminated ACK TP number TP_210_004 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of RSC after an early dialogue with 183 was established Test Purpose Ensure that on receipt of a RSC after an early dialogue with receipt of a 183 Session Progress provisional response is established, a CANCEL request is sent containing a Reason header. The SUT receives a 487 Request Terminated and sends an ACK request ISUP Parameter values SIP Parameter values CANCEL: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE 183 Session Progress RSC CANCEL RLC 200 OK (CANCEL) 487 Request Terminated ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 180 TP number TP_210_005 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of RSC after a confirmed dialogue was established Test Purpose Ensure that on receipt of RSC after a confirmed dialogue with a 200 OK (INVITE) final response was established, a BYE request is sent ISUP Parameter values SIP Parameter values BYE: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ANM 200 OK (INVITE) ACK RSC BYE RLC 200 OK (BYE) TP number TP_210_006 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of GRS before an early dialogue was established Test Purpose Ensure that on receipt of a GRS before an early dialogue is established, a CANCEL request is sent containing a Reason header. The SUT received a 487 Request Terminated and sends an ACK request ISUP Parameter values SIP Parameter values CANCEL: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying GRS CANCEL GRA 200 OK (CANCEL) 487 Request Terminated ACK TP number TP_210_007 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of GRS after an early dialogue with 180 was established Test Purpose Ensure that on receipt of a GRS after an early dialogue with receipt of a 180 Ringing provisional response is established, a CANCEL request is sent containing a Reason header. The SUT receives a 487 Request Terminated and sends an ACK request ISUP Parameter values SIP Parameter values CANCEL: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing GRS CANCEL GRA 200 OK (CANCEL) 487 Request Terminated ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 181 TP number TP_210_008 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of GRS after an early dialogue with 181 was established Test Purpose Ensure that on receipt of a GRS after an early dialogue with receipt of a 181 Being forwarded provisional response is established, a CANCEL request is sent containing a Reason header. The SUT receives a 487 Request Terminated and sends an ACK request ISUP Parameter values SIP Parameter values CANCEL: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE 181 Being forwarded GRS CANCEL GRA 200 OK (CANCEL) 487 Request Terminated ACK TP number TP_210_009 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of GRS after an early dialogue with 183 was established Test Purpose Ensure that on receipt of a GRS after an early dialogue with receipt of a 183 Session Progress provisional response is established, a CANCEL request is sent containing a Reason header. The SUT receives a 487 Request Terminated and sends an ACK request ISUP Parameter values SIP Parameter values CANCEL: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE 183 Session Progress GRS CANCEL GRA 200 OK (CANCEL) 487 Request Terminated ACK TP number TP_210_010 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of GRS after a confirmed dialogue was established Test Purpose Ensure that on receipt of GRS after a confirmed dialogue with a 200 OK (INVITE) final response was established, a BYE request is sent ISUP Parameter values SIP Parameter values BYE: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ANM 200 OK (INVITE) ACK GRS BYE GRA 200 OK (BYE) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 182 TP number TP_210_011 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of GRS after a confirmed dialogue was established, all affected communications are terminated. Test Purpose Two connections are established. Ensure that on receipt of GRS after a confirmed dialogue with a 200 OK (INVITE) final response was established, a BYE request for each of the established connection is sent ISUP Parameter values SIP Parameter values BYE: Reason: Comments Message flows ISUP MGCF Mg Two connection are established GRS GRA BYE (1) 200 OK (BYE) BYE (2) 200 OK (BYE) TP number TP_210_012 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of CGB 'hardware oriented' before an early dialogue was established Test Purpose Ensure that on receipt of a CGB 'hardware oriented' before an early dialogue is established, a CANCEL request is sent containing a Reason header. The SUT received a 487 Request Terminated and sends an ACK request ISUP Parameter values CGB: Circuit group supervision message type=hardware failure oriented SIP Parameter values CANCEL: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CGB CANCEL CGBA 200 OK (CANCEL) 487 Request Terminated ACK TP number TP_210_013 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of CGB 'hardware oriented' after an early dialogue with 180 was established Test Purpose Ensure that on receipt of a CGB 'hardware oriented' after an early dialogue with receipt of a 180 Ringing provisional response is established, a CANCEL request is sent containing a Reason header. The SUT receives a 487 Request Terminated and sends an ACK request ISUP Parameter values CGB: Circuit group supervision message type=hardware failure oriented SIP Parameter values CANCEL: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CGB CANCEL CGBA 200 OK (CANCEL) 487 Request Terminated ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 183 TP number TP_210_014 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of CGB 'hardware oriented' after an early dialogue with 181 was established Test Purpose Ensure that on receipt of a CGB 'hardware oriented' after an early dialogue with receipt of a 181 Being forwarded provisional response is established, a CANCEL request is sent containing a Reason header. The SUT receives a 487 Request Terminated and sends an ACK request ISUP Parameter values CGB: Circuit group supervision message type=hardware failure oriented SIP Parameter values CANCEL: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE 181 Being forwarded CGB CANCEL CGBA 200 OK (CANCEL) 487 Request Terminated ACK TP number TP_210_015 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of CGB 'hardware oriented' after an early dialogue with 183 was established Test Purpose Ensure that on receipt of a CGB 'hardware oriented' after an early dialogue with receipt of a 183 Session Progress provisional response is established, a CANCEL request is sent containing a Reason header. The SUT receives a 487 Request Terminated and sends an ACK request ISUP Parameter values CGB: Circuit group supervision message type=hardware failure oriented SIP Parameter values CANCEL: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE 183 Session Progress CGB CANCEL CGBA 200 OK (CANCEL) 487 Request Terminated ACK TP number TP_210_016 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of CGB 'hardware oriented' after a confirmed dialogue was established Test Purpose Ensure that on receipt of CGB 'hardware oriented' after a confirmed dialogue with a 200 OK (INVITE) final response was established, a BYE request is sent ISUP Parameter values CGB: Circuit group supervision message type=hardware failure oriented SIP Parameter values BYE: Reason: Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ANM 200 OK (INVITE) ACK CGB BYE CGBA 200 OK (BYE) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 184 TP number TP_210_017 Reference 7.2.3.2.15 TSS reference ISUP-SIP/Basic call/Receipt_of_RSC-GRS-CGB/ Selection criteria Test Purpose name Receipt of CGB 'hardware oriented' after a confirmed dialogue was established, all affected communications are terminated Test Purpose Two connections are established. Ensure that on receipt of CGB 'hardware oriented' after a confirmed dialogue with a 200 OK (INVITE) final response was established, a BYE request for each of the established connection is sent ISUP Parameter values CGB: Circuit group supervision message type=hardware failure oriented SIP Parameter values BYE: Reason: Comments Message flows ISUP MGCF Mg Two connection are established CGB CGBA BYE (1) 200 OK (BYE) BYE (2) 200 OK (BYE)
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.1.2.11 Autonomous Release at O-MGCF	TP number TP_211_001 Reference 7.2.3.2.16 TSS reference ISUP-SIP/Basic call/Autonomous_Release/ Selection criteria PICS 6.2.1/3 Test Purpose name COT procedure fails Test Purpose IAM received and the continuity check indicator is set to 'continuitycheck required' or 'performed on a previous circuit'. Ensure that on receipt of a COT message and the continuity indicator is set to 'continuity check failed the already established early dialog is terminated. A CANCEL request is sent. A Reason header is present containing the cause value '41' ISUP Parameter values COT: 'continuity check failed' SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying 183 Session Progress PRACK 200 OK (PRACK) COT CANCEL 200 OK (CANCEL) 487 Request Terminated ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 185 TP number TP_211_002 Reference 7.2.3.2.16 TSS reference ISUP-SIP/Basic call/Autonomous_Release/ Selection criteria PICS 6.2.1/3 Test Purpose name T8 expires Test Purpose IAM received and the continuity check indicator is set to 'continuitycheck required' or 'performed on a previous circuit'. Ensure that on expiry of ISUP timer T8 the already established early dialog is terminated. A CANCEL request is sent ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE Start T8 100 Trying 183 Session Progress PRACK 200 OK (PRACK) T8 expires CANCEL 200 OK (CANCEL) 487 Request Terminated ACK TP number TP_211_003 Reference 7.2.3.2.16 TSS reference ISUP-SIP/Basic call/Autonomous_Release/ Selection criteria Test Purpose name Call is released to due message compatibility instruction 'Release call' received in the early dialogue Test Purpose Ensure that on receipt of an unknown ISUP message in the early dialogue and the message compatibility is set to 'release call' an ISUP REL message is sent and the Cause indicator is set to value 97. In addition a SIP CANCEL request is sent and a Reason header field is present ISUP Parameter values ??? = unknown message: Message compatibility information: Release call indicator=release call REL: Cause=97 SIP Parameter values CANCEL: Reason: Comments For an unknown message use a message type unknown in the SUT. Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ??? REL CANCEL RLC 200 OK (CANCEL) 487 Request Terminated ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 186 TP number TP_211_004 Reference 7.2.3.2.16 TSS reference ISUP-SIP/Basic call/Autonomous_Release/ Selection criteria Test Purpose name Call is released to due message compatibility instruction 'Release call' received in the confirmed dialogue Test Purpose Ensure that on receipt of an unknown ISUP message in the confirmed dialogue and the message compatibility is set to 'release call' an ISUP REL message is sent and the Cause indicator is set to value 97. In addition a SIP BYE request is sent and a Reason header field is present ISUP Parameter values ??? = unknown message: Message compatibility information: Release call indicator=release call REL: Cause=97 SIP Parameter values BYE: Reason: Comments For an unknown message use a message type unknown in the SUT. Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing 200 OK (INVITE) ACK ??? REL BYE RLC 200 OK (BYE) TP number TP_211_005 Reference 7.2.3.2.16 TSS reference ISUP-SIP/Basic call/Autonomous_Release/ Selection criteria Test Purpose name Call is released to due parameter compatibility instruction 'Release call' received in the early dialogue Test Purpose Ensure that on receipt of a CPG in the early dialogue and an unknown parameter is present the parameter compatibility instruction is set to 'release call' an ISUP REL message is sent and the Cause indicator is set to value 99 or 110. In addition a SIP CANCEL request is sent and a Reason header field is present. ISUP Parameter values CPG: Parameter compatibility information: Release call indicator=release call REL: Cause=99 or 110 SIP Parameter values CANCEL: Reason: Comments For an unknown parameter use a parameter type unknown in the SUT. Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG REL CANCEL RLC 200 OK (CANCEL) 487 Request Terminated ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 187 TP number TP_211_006 Reference 7.2.3.2.16 TSS reference ISUP-SIP/Basic call/Autonomous_Release/ Selection criteria Test Purpose name Call is released to due parameter compatibility instruction 'Release call' received in the confirmed dialogue Test Purpose Ensure that on receipt of a CPG in the confirmed dialogue and an unknown parameter is present the parameter compatibility instruction is set to 'release call' an ISUP REL message is sent and the Cause indicator is set to value 99 or 110. In addition a SIP BYE request is sent and a Reason header field is present ISUP Parameter values CPG: Parameter compatibility information: Release call indicator=release call REL: Cause=99 or 110 SIP Parameter values BYE: Reason: Comments For an unknown parameter use a parameter type unknown in the SUT. Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ANM 200 OK (INVITE) ACK CPG REL BYE RLC 200 OK (BYE)
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2 Supplementary Services
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.1 Void
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.2 Connected line presentation and restriction (COLP/COLR)	TP number TP_302_001 Reference 7.4.2 TSS reference PSTN-SS/COL/ Selection criteria NOT PICS 6.3.4/1 AND (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/2 Test Purpose name The SUT does not invoke the COLP service Test Purpose Ensure that on receipt of an INVITE request ant the SUT does not invoke the COLP service, an IAM is sent and the Connected Line Identity Request indicator" field of the Optional forward call indicators parameter of the IAM to 'not requested'. A received connected number is not interworked ISUP Parameter values IAM: Optional forward call indicators = 'not requested' ANM/CON: Connected number present SIP Parameter values 200 OK: P-Asserted-Identity not present Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 188 TP number TP_302_002 Reference 7.4.2.1.2 TSS reference PSTN-SS/COL/ Selection criteria PICS 6.3.4/1 AND (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/2 Test Purpose name The SUT invokes the COLP service presentation allowed Test Purpose Ensure that on receipt of an INVITE request ant the SUT invokes the COLP service, an IAM is sent and the Connected Line Identity Request indicator" field of the Optional forward call indicators parameter of the IAM to 'requested'. A received connected number presentation allowed is interworked. Connected number Nature of Address Indicator equal to • 'national (significant) number' 200 OK INVITE P-Asserted-Identity Add CC (of the country where the SUT is located) to Connected number address signals to construct an E.164 number in the URI. Prefix number with '+' in the format '+ CC NDC SN.' • 'international number' 200 OK INVITE P-Asserted-Identity Map complete Connected number address signals to construct an E.164 number in the URI. Prefix number with "+" in the Format '+ CC NDC SN'. Address presentation restriction indicator • 'presentation allowed' Privacy header is not present or if present the value is not equal to 'id' ISUP Parameter values IAM: Optional forward call indicators = 'not requested' ANM/CON: Connected number present SIP Parameter values INVITE: P-Asserted-Identity present 200 OK: P-Asserted-Identity present Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 189 TP number TP_302_003 Reference 7.4.2.1.2 TSS reference PSTN-SS/COL/ Selection criteria PICS 6.3.4/1 AND (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/2 Test Purpose name The SUT invokes the COLP service presentation restricted Test Purpose Ensure that on receipt of an INVITE request ant the SUT invokes the COLP service, an IAM is sent and the Connected Line Identity Request indicator" field of the Optional forward call indicators parameter of the IAM to 'requested'. A received connected number presentation restricted is interworked Connected number Nature of Address Indicator equal to • 'national (significant) number' 200 OK INVITE P-Asserted-Identity Add CC (of the country where the SUT is located) to Connected number address signals to construct an E.164 number in the URI. Prefix number with '+' in the format '+ CC NDC SN.' • 'international number' 200 OK INVITE P-Asserted-Identity Map complete Connected number address signals to construct an E.164 number in the URI. Prefix number with "+" in the Format '+ CC NDC SN'. Address presentation restriction indicator • 'presentation restricted' Privacy: id ISUP Parameter values IAM: Optional forward call indicators = 'requested' ANM/CON: Connected number present SIP Parameter values INVITE: P-Asserted-Identity present 200 OK: P-Asserted-Identity present Privacy: id Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying CASE A 180 Ringing ACM 200 OK (INVITE) ANM ACK CASE B 200 OK (INVITE) CON ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 190 TP number TP_302_004 Reference 7.4.2.2 TSS reference PSTN-SS/COL/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/2 Test Purpose name COL request is set to 'not requested' Test Purpose Ensure that on receipt of an IAM and the Connected Line Identity Request indicator in the Optional Forward Call Indicators parameter is set to 'not requested', no P-Asserted-Identity received in a provisional or successful final response is present. No connected number is sent in an ANM or CON. ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CASE A ACM 180 Ringing ANM 200 OK (INVITE) ACK CASE B CON 200 OK (INVITE) ACK Apply post test routine TP number TP_302_004A Reference 7.4.2.2 TSS reference PSTN-SS/COL/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/2 Test Purpose name COL request is set to not requested P-Asserted-Identity is not mapped Test Purpose Ensure that on receipt of an IAM and the Connected Line Identity Request indicator in the Optional Forward Call Indicators parameter is set to 'not requested', a P-Asserted-Identity received in a provisional or successful final response is present. No connected number is sent in an ANM or CON. ISUP Parameter values SIP Parameter values 200 OK: P-Asserted-Identity present Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CASE A ACM 180 Ringing ANM 200 OK (INVITE) ACK CASE B CON 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 191 TP number TP_302_004B Reference 7.4.2.2 TSS reference PSTN-SS/COL/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/2 Test Purpose name COL request is set to requested P-Asserted-Identity is not received a network provided Connected number is sent Test Purpose Ensure that on receipt of an IAM and the Connected Line Identity Request indicator in the Optional Forward Call Indicators parameter is set to 'requested', no P-Asserted-Identity received in a provisional or successful final response is present. A network provided connected number is sent in an ANM or CON. • The Nature of address indicator is set to = spare • Numbering plan indicator = spare • Address presentation restriction indicator = Address not available • Screening indicator = network provided • Address signals: not present ISUP Parameter values ANM/CON: Connected number SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CASE A ACM 180 Ringing ANM 200 OK (INVITE) ACK CASE B CON 200 OK (INVITE) ACK Apply post test routine TP number TP_302_005 Reference 7.4.2.2 TSS reference PSTN-SS/COL/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/2 Test Purpose name COL request is set to 'requested' Terminating identity received in a 180 response Test Purpose Ensure that on receipt of an IAM and the Connected Line Identity Request indicator in the Optional Forward Call Indicators parameter is set to 'requested', the P-Asserted-Identity received in a provisional response is sent in the ANM. Coding of Connected number parameter Number incomplete indicator equal to 'Complete' Numbering Plan Indicator equal to 'ISDN/Telephony (Recommendation E.164 [i.1])' Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then set to "national (significant) number" else set to "international number" Address Presentation Restricted Indicator derived from the Privacy header according the mapping as described in table 6.2.2-1 ISUP Parameter values IAM: Optional Forward Call Indicators Connected Line Identity Request = requested ANM: Connected number Presentation restriction Privacy_VA SIP Parameter values 180: P-Asserted-Identity Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 192 TP number TP_302_006 Reference 7.4.2.2 TSS reference PSTN-SS/COL/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/2 Test Purpose name COL request is set to 'requested' Terminating identity received in a 200 OK response Test Purpose Ensure that on receipt of an IAM and the Connected Line Identity Request indicator in the Optional Forward Call Indicators parameter is set to 'requested', the P-Asserted-Identity received in a 200 OK response is sent in the ANM. Coding of Connected number parameter Number incomplete indicator equal to 'Complete' Numbering Plan Indicator equal to 'ISDN/Telephony (Recommendation E.164 [i.1])' Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then set to "national (significant) number" else set to "international number" Address Presentation Restricted Indicator derived from the Privacy header according the mapping as described in table 6.2.2-1 ISUP Parameter values IAM: Optional Forward Call Indicators Connected Line Identity Request = requested ANM: Connected number Presentation restriction Privacy_VA SIP Parameter values 200: P-Asserted-Identity Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine TP number TP_302_007 Reference 7.4.2.2 TSS reference PSTN-SS/COL/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/2 Test Purpose name COL request is set to requested Terminating identity received in a 200 OK response Test Purpose Ensure that on receipt of an IAM and the Connected Line Identity Request indicator in the Optional Forward Call Indicators parameter is set to 'requested', if no provisional response was received the P-Asserted-Identity received in a 200 OK response is sent in the CON. Coding of Connected number parameter Number incomplete indicator equal to 'Complete' Numbering Plan Indicator equal to 'ISDN/Telephony (Recommendation E.164 [i.1])' Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then set to "national (significant) number" else set to "international number" Address Presentation Restricted Indicator derived from the Privacy header according the mapping as described in table 6.2.2-1 ISUP Parameter values IAM: Optional Forward Call Indicators Connected Line Identity Request = requested CON: Connected number Presentation restriction Privacy_VA SIP Parameter values 200: P-Asserted-Identity Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ANM 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 193 Table 6.2.2-1: Mapping of Privacy value into Address presentation restriction indicator Privacy_VA Privacy value Address Presentation Restricted Indicator Privacy_VA_01 Header Presentation restricted Privacy_VA_02 User Presentation restricted Privacy_VA_03 None Presentation allowed Privacy_VA_04 Id Presentation restricted Privacy_VA_05 Privacy header not present Presentation allowed
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.3 Malicious call identification	TP number TP_303_001 Reference 7.4.4 TSS reference PSTN-SS/MCID/ Selection criteria NOT PICS 6.3.2/3 Test Purpose name MCID request before ACM Test Purpose Ensure that a MCID request before an ACM received in an ISUP IDR is discarded without disrupt the call setup procedure. The sending of an IRS is optional ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying CASE A IDR IRS CASE B IDR Apply post test routine TP number TP_303_002 Reference 7.4.4 TSS reference PSTN-SS/MCID/ Selection criteria NOT PICS 6.3.2/3 Test Purpose name MCID request after ACM Test Purpose Ensure that a MCID request after an ACM received in an ISUP IDR is discarded without disrupt the call setup procedure. The sending of an IRS is optional ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM CASE A IDR IRS CASE B IDR Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 194
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.4 Subaddressing (SUB)	TP number TP_304_001 Reference 7.4.5.2 TSS reference PSTN-SS/SUB/ Selection criteria PICS 6.3.2/4 Test Purpose name isub parameter in the To header is mapped into Called party Subaddress Test Purpose Ensure that on receipt of an initial INVITE request, an IAM is sent. The isub parameter present in the To header is mapped into the Called party Subaddress covered in an Access Transport parameter in the sent IAM. If the isub-encoding parameter is present, the values 'nsap-ia5', 'nsap-bcd' or 'nsap' are relevant for mapping Encoding of the Subaddress in the IAM: Type of Subaddress='NSAP' Subaddress digits derived from the uric of the isub parameter ISUP Parameter values IAM: Access Transport Called party subaddress Type of Subaddress=NSAP Subaddress digits derived from the uric of the isub parameter SIP Parameter values INVITE: To: isub uric Subaddress digits isub-encoding: Not present nsap-ia5 nsap-bcd nsap Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_304_002 Reference 7.4.5.2 TSS reference PSTN-SS/SUB/ Selection criteria PICS 6.3.2/4 Test Purpose name isub parameter in the To header is not mapped Test Purpose Ensure that on receipt of an initial INVITE request, an IAM is sent. The isub parameter present in the To header is not mapped into the Called party Subaddress if the value of the isub-encoding parameter is other then 'nsap-ia5', 'nsap-bcd' or 'nsap' ISUP Parameter values SIP Parameter values INVITE: To: isub uric Subaddress digits isub-encoding: <any token> Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 195 TP number TP_304_003 Reference 7.4.5.2 TSS reference PSTN-SS/SUB/ Selection criteria PICS 6.3.2/4 Test Purpose name isub parameter in the P-Asserted-Identity header is mapped into Calling party Subaddress Test Purpose Ensure that on receipt of an initial INVITE request, an IAM is sent. The isub parameter present in the P-Asserted-Identity header is mapped into the Calling party Subaddress covered in an Access Transport parameter in the sent IAM. If the isub-encoding parameter is present, the values 'nsap-ia5', 'nsap-bcd' or 'nsap' are relevant for mapping Encoding of the Subaddress: Type of Subaddress='NSAP' Subaddress digits derived from the uric of the isub parameter ISUP Parameter values IAM: Access Transport Calling party subaddress Type of Subaddress=NSAP Subaddress digits derived from the uric of the isub parameter SIP Parameter values INVITE: P-Asserted-Identity: isub uric Subaddress digits isub-encoding: Not present nsap-ia5 nsap-bcd nsap Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_304_004 Reference 7.4.5.2 TSS reference PSTN-SS/SUB/ Selection criteria PICS 6.3.2/4 Test Purpose name isub parameter in the P-Asserted-Identity header in the INVITE is not mapped Test Purpose Ensure that on receipt of an initial INVITE request, an IAM is sent. The isub parameter present in the P-Asserted-Identity header is not mapped into the Calling party Subaddress if the value of the isub-encoding parameter is other then 'nsap-ia5', 'nsap-bcd' or 'nsap' ISUP Parameter values SIP Parameter values INVITE: P-Asserted-Identity: isub uric Subaddress digits isub-encoding: <any token> Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 196 TP number TP_304_005 Reference 7.4.5.2 TSS reference PSTN-SS/SUB/ Selection criteria PICS 6.3.2/4 Test Purpose name Connected party Subaddress in the ANM is mapped into the isub parameter in the P-Asserted-Identity header in the 200 OK Test Purpose Ensure that on receipt of an ANM message containing a Connected party Subaddress parameter in an Access Transport parameter, a 200 OK (INVITE) is sent and the P-Asserted-Identity header contains an isub parameter, the uric value is derived from the Connected Subaddress digits of the Connected party subaddress digits ISUP Parameter values ANM: Access Transport Connected party subaddress Type of Subaddress=NSAP Subaddress digits SIP Parameter values 200 OK: P-Asserted-Identity: isub uric digits derived from the Connected party Subaddress digits Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 200 OK (INVITE) ANM ACK Apply post test routine TP number TP_304_006 Reference 7.4.5.2 TSS reference PSTN-SS/SUB/ Selection criteria PICS 6.3.2/4 Test Purpose name Connected party Subaddress in the ANM is not mapped Test Purpose Ensure that on receipt of an ANM message containing a Connected party Subaddress parameter in an Access Transport parameter, a 200 OK (INVITE) is sent and the Connected party subaddress is not mapped if the Type of subaddress is not equal 'NSAP' ISUP Parameter values ANM: Access Transport Connected party subaddress Type of Subaddress other then NSAP SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 200 OK (INVITE) ANM ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 197 TP number TP_304_007 Reference 7.4.5.3 TSS reference PSTN-SS/SUB/ Selection criteria PICS 6.3.2/4 Test Purpose name Mapping of Called Party subaddress in the IAM into isub parameter in the To header in the INVITE Test Purpose Ensure that on receipt of an IAM containing a Called party subaddress in the Access Transport parameter, an initial INVITE is sent. The Called party subaddress is mapped into an isub parameter present in the To header in the INVITE if the Type of number of the subaddress is set to 'NSAP', the isub-encoding parameter is set to 'nsap-ia5'. ISUP Parameter values IAM: Access Transport Called party subaddress Type of Subaddress=NSAP Subaddress digits SIP Parameter values INVITE: To: isub uric digits derived from the Called party Subaddress digits isub-encoding=nsap-ia5 Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_304_008 Reference 7.4.5.3 TSS reference PSTN-SS/SUB/ Selection criteria PICS 6.3.2/4 Test Purpose name No mapping of Called Party subaddress in the IAM Test Purpose Ensure that on receipt of an IAM containing a Called party subaddress in the Access Transport parameter, an initial INVITE is sent. The Called party subaddress is not mapped into an isub parameter present in the To header of the INVITE if the Type of number of the subaddress is not equal to 'NSAP' ISUP Parameter values IAM: Access Transport Called party subaddress Type of Subaddress not NSAP Subaddress digits SIP Parameter values Comments Message flows Mg MGCF ISUP IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 198 TP number TP_304_009 Reference 7.4.5.3 TSS reference PSTN-SS/SUB/ Selection criteria PICS 6.3.2/4 Test Purpose name Mapping of Calling Party subaddress in the IAM into isub parameter in the P-Asserted- Identity header in the INVITE Test Purpose Ensure that on receipt of an IAM containing a Calling party subaddress in the Access Transport parameter, an initial INVITE is sent. The Calling party subaddress is mapped into an isub parameter present in the P-Asserted-Identity header in the INVITE if the Type of number of the subaddress is equal to 'NSAP', the isub-encoding parameter is set to 'nsap- ia5'. ISUP Parameter values IAM: Access Transport Calling party subaddress Type of Subaddress=NSAP Subaddress digits SIP Parameter values INVITE: P-Asserted-Identity: isub uric digits derived from the Calling party Subaddress digits isub-encoding=nsap-ia5 Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_304_010 Reference 7.4.5.3 TSS reference PSTN-SS/SUB/ Selection criteria AND PICS 6.3.2/4 Test Purpose name No mapping of Calling Party subaddress in the IAM Test Purpose Ensure that on receipt of an IAM containing a Calling party subaddress in the Access Transport parameter, an initial INVITE is sent. The Calling party subaddress is not mapped into an isub parameter present in the P-Asserted-Identity header in the INVITE if the Type of number of the subaddress is not equal to 'NSAP' ISUP Parameter values IAM: Access Transport Calling party subaddress Type of Subaddress not NSAP Subaddress digits SIP Parameter values Comments Message flows Mg MGCF ISUP IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 199 TP number TP_304_011 Reference 7.4.5.3 TSS reference PSTN-SS/SUB/ Selection criteria PICS 6.3.2/4 Test Purpose name Mapping of isub parameter in the 200 OK into the Connected party subaddress in the ANM Test Purpose Ensure that on receipt of an isub parameter present in the P-Asserted-Identity in a 200 OK (INVITE), an ANM is sent and the received Subaddress is mapped in the Connected party subaddress present in the Access Transport parameter in the ANM. If the isub-encoding parameter is present, the values 'nsap-ia5', 'nsap-bcd' or 'nsap' are relevant for mapping ISUP Parameter values ANM: Access Transport Connected party subaddress Type of Subaddress=NSAP Subaddress digits derived from the uric of the isub parameter SIP Parameter values 200 OK: P-Asserted-Identity: isub uric Subaddress digits isub-encoding: Not present nsap-ia5 nsap-bcd nsap Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine TP number TP_304_012 Reference 7.4.5.3 TSS reference PSTN-SS/SUB/ Selection criteria PICS 6.3.2/4 Test Purpose name Mapping of isub parameter in the 200 OK into the Connected party subaddress in the ANM Test Purpose Ensure that on receipt of an isub parameter present in the P-Asserted-Identity in a 200 OK (INVITE), an ANM is sent and the received Subaddress is not mapped in the Connected party subaddress present in the Access Transport parameter in the ANM If the isub- encoding parameter is present and the value is not equal to 'nsap-ia5', 'nsap-bcd' or 'nsap' ISUP Parameter values SIP Parameter values 200 OK: P-Asserted-Identity: isub isub-encoding: Not nsap-ia5, nsap-bcd, nsap Comments Message flows Mg MGCF ISUP IAM INVITE ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 200 6.2.5 Call Forwarding Busy (CFB)/Call Forwarding No Reply (CFNR)/Call Forwarding Unconditional (CFU) TP number TP_305_001 Reference 7.4.6.2.2 table 7.4.6.2.2.2 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 hi-targeted-to-uri into early ACM Redirection number and Redirecting Reason Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) an ACM is sent. The called party status is set to 'no indication'. The History-Info entry following the last History-Info entry containing a Reason header is mapped into the Redirection number: • If CC is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', the country code is removed from the digit string and sent in the Address signal of the Redirection number • If the country code is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' the digit string is used unchanged and sent in the Address signal of the Redirection number The Redirecting reason in the Call Diversion Information parameter is set as indicated in table 6.2.5-1 ISUP Parameter values ACM: Called party status=no indication Redirection number Nature of address indicator Address signal Derived from the last History-Info entry Call Diversion Information Redirecting reason= Redirecting_Reason SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=CAUSE_value >; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine Table 6.2.5-1: Mapping of Reason header into Redirecting reason CAUSE CAUSE_value Redirecting_Reason VA_01 302 Deflection immediate response VA_02 486 User busy VA_03 408 No reply VA_04 503 Mobile subscriber not reachable TP number TP_305_001A Reference 7.4.6.2.2 table 7.4.6.2.2.2 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 into early ACM Generic notification is set to 'Call is diverting' Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) History-Info header, an ACM is sent. The Generic notification indicator is set to 'Call is diverting' ISUP Parameter values ACM: Called party status=no indication Generic Notification call is diverting SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=any >; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 201 TP number TP_305_002 Reference 7.4.6.2.2 table 7.4.6.2.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 Privacy header into early ACM Notification subscription options Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) containing a Privacy header, an ACM is sent. The called party status is set to 'no indication'. The Notification subscription options in the Call Diversion Information parameter is set according the Privacy header in the message body as indicated in table 6.2.5-2 ISUP Parameter values ACM: Called party status=no indication Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 181: Privacy: Priv-value History-Info: <sip:any proper URI?Reason=SIP;cause=any value >; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine Table 6.2.5-2: Mapping of Privacy value into Notification subscription options CAUSE Priv-value SUBS_options VA_01 history presentation not allowed VA_02 session presentation not allowed VA_03 header presentation not allowed VA_04 None or absent Presentation allowed with redirection number TP number TP_305_003 Reference 7.4.6.2.2 table 7.4.6.2.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 escaped Privacy header into early ACM Notification subscription options Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) containing an escaped Privacy header field in the last hi-targeted-to-uri, an ACM is sent. The called party status is set to 'no indication'. The Notification subscription options in the Call Diversion Information parameter is set according the escaped Privacy header in the last History entry as indicated in table 6.2.5-3 ISUP Parameter values ACM: Called party status=no indication Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=any >; index=1, <sip:any proper URI?Privacy=Priv-value>; index=1.1 <sip:any proper URI>; index=1.2 Comments Privacy and Reason header can appear in reverse order Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine Table 6.2.5-3: Mapping of Privacy value into Notification subscription options CAUSE Priv-value SUBS_options VA_01 history presentation allowed without redirection number VA_02 session presentation allowed without redirection number VA_03 header presentation allowed without redirection number VA_04 None or absent Presentation allowed with redirection number ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 202 TP number TP_305_004 Reference 7.4.6.2.2 table 7.4.6.2.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 Privacy header into early ACM Redirection number restriction Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) containing a Privacy header, an ACM is sent. The called party status is set to 'no indication'. The Redirection number restriction is set according the Privacy header in the message body as indicated in table 6.2.5-4 ISUP Parameter values ACM: Called party status=no indication Redirection number restriction= PRES_restr SIP Parameter values 181: Privacy: Priv-value History-Info: <sip:any proper URI?Reason=SIP;cause=any >; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine TP number TP_305_005 Reference 7.4.6.2.2 table 7.4.6.2.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 escaped Privacy header into early ACM Redirection number restriction Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded), an ACM is sent. The called party status is set to 'no indication'. The Redirection number restriction is set according the escaped Privacy header in the last History entry as indicated in table 6.2.5-4 ISUP Parameter values ACM: Called party status=no indication Redirection number restriction= PRES_restr SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=any>; index=1, <sip:any proper URI?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine Table 6.2.5-4: Mapping of Privacy value into Redirection number restriction CAUSE Priv-value PRES_restr VA_01 history Presentation restricted VA_02 session Presentation restricted VA_03 header Presentation restricted VA_04 None or absent Presentation allowed or absent ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 203 TP number TP_305_006 Reference 7.4.6.2.2 table 7.4.6.2.2.2, table 7.4.6.2.2.7 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 hi-targeted-to-uri into CPG Redirection number and Redirecting Reason Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) a CPG is sent. The Event indicator is set to 'Progress'. The History-Info entry following the last History-Info entry containing a Reason header is mapped into the Redirection number: • If CC is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', the country code is removed from the digit string • If the country code is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' the digit string is used unchanged. The Redirecting reason in the Call Diversion Information parameter is set as indicated in table 6.2.5-5 ISUP Parameter values CPG: Event=Progress OR Event=Redirecting_Reason Redirection number Derived from the last History-Info entry Call Diversion Information Redirecting reason= Redirecting_Reason SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=CAUSE_value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine Table 6.2.5-5: Mapping of Reason header into Redirecting reason CAUSE CAUSE_value Redirecting_Reason VA_01 302 Deflection immediate response VA_02 486 User busy VA_03 408 No reply VA_04 503 Mobile subscriber not reachable TP number TP_305_006A Reference 7.4.6.2.2 table 7.4.6.2.2.2, table 7.4.6.2.2.7 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 hi-targeted-to-uri into CPG Generic notification is set to ‘Call is diverting’ Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) a CPG is sent. The Event indicator is set to 'Progress'. The Generic notification indicator is set to ‘Call is diverting’. ISUP Parameter values CPG: Event=Progress Generic Notification call is diverting SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=any>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 204 TP number TP_305_007 Reference 7.4.6.2.2 table 7.4.6.2.2.2 table 7.4.6.2.2.7 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.5/1 AND PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 hi-targeted-to-uri escaped Reason header into CPG Event indicator Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) a CPG is sent. The Event indicator is set to 'Redirecting_Reason' as indicated in table 6.2.5-6. The History-Info entry following the last History-Info entry containing a Reason header is mapped into the Redirection number: • If CC is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', the country code is removed from the digit string • If the country code is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' the digit string is used unchanged ISUP Parameter values CPG: Event=Redirecting_Reason Redirection number Derived from the last History-Info entry SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=CAUSE_value >; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine Table 6.2.5-6: Mapping of Reason header into Event indicator CAUSE_value Redirecting_Reason VA_01 486 User busy VA_02 408 No reply TP number TP_305_008 Reference 7.4.6.2.2 table 7.4.6.2.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 Privacy header into CPG Notification subscription options Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) containing a Privacy header, a CPG is sent. The Event indicator is set to 'Progress'. The Notification subscription options in the Call Diversion Information parameter is set according the Privacy header in the message body as indicated in table 6.2.5-7 ISUP Parameter values CPG: Event=Progress Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 181: Privacy: Priv-value History-Info: <sip:any proper URI?Reason=SIP;cause=any >; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 205 Table 6.2.5-7: Mapping of Privacy value into Notification subscription options CAUSE Priv-value SUBS_options VA_01 history presentation not allowed VA_02 session presentation not allowed VA_03 header presentation not allowed VA_04 None or absent Presentation allowed with redirection number TP number TP_305_009 Reference 7.4.6.2.2 table 7.4.6.2.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 escaped Privacy header into CPG Notification subscription options Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) containing an escaped Privacy header field in the last hi-targeted-to-uri, a CPG is sent. The Event indicator is set to 'Progress'. The Notification subscription options in the Call Diversion Information parameter is set according the escaped Privacy header in the last History entry as indicated in table 6.2.5-8 ISUP Parameter values CPG: Event=Progress Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=any >; index=1, <sip:any proper URI?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine Table 6.2.5-8: Mapping of Privacy value into Notification subscription options CAUSE Priv-value SUBS_options VA_01 history presentation allowed without redirection number VA_02 session presentation allowed without redirection number VA_03 header presentation allowed without redirection number VA_04 None or absent Presentation allowed with redirection number TP number TP_305_010 Reference 7.4.6.2.2 table 7.4.6.2.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 Privacy header into CPG Redirection number restriction Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) containing a Privacy header in the message body, a CPG is sent. The Event indicator is set to 'Progress'. The Redirection number restriction is set according the Privacy header in the message body as indicated in table 6.2.5-9 ISUP Parameter values CPG: Event=Progress Redirection number restriction= PRES_restr SIP Parameter values 181: Privacy: Priv-value History-Info: <sip:any proper URI?Reason=SIP;cause=any value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 206 TP number TP_305_011 Reference 7.4.6.2.2 table 7.4.6.2.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 escaped Privacy header into CPG Redirection number restriction Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded), a CPG is sent. The Event indicator is set to 'Progress'. The Redirection number restriction is set according the escaped Privacy header in the last History entry as indicated in table 6.2.5-9 ISUP Parameter values CPG: Event=Progress Redirection number restriction= PRES_restr SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=any>; index=1, <sip:any proper URI?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine Table 6.2.5-9: Mapping of Privacy value into Redirection number restriction CAUSE Priv-value PRES_restr VA_01 history Presentation restricted VA_02 session Presentation restricted VA_03 header Presentation restricted VA_04 None or absent Presentation allowed or absent TP number TP_305_012 Reference 7.4.6.2.2 table 7.4.6.2.2.2, table 7.4.6.2.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 hi-targeted-to-uri into ACM Redirection number and Redirecting Reason Test Purpose Ensure that on receipt of 180 (Ringing) an ACM is sent. The called party status is set to 'subscriber free'. The History-Info entry following the last History-Info entry containing a Reason header is mapped into the Redirection number: • If CC is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', the country code is removed from the digit string • If the country code is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' the digit string is used unchanged. The Redirecting reason in the Call Diversion Information parameter is set as indicated in table 6.2.5-10 ISUP Parameter values ACM: Called party status=subscriber free Redirection number Derived from the last History-Info entry Call Diversion Information Redirecting reason= Redirecting_Reason SIP Parameter values 180: History-Info: <sip:any proper URI?Reason=SIP;cause=CAUSE_value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 207 Table 6.2.5-10: Mapping of Reason header into Redirecting reason CAUSE Redirecting_Reason CAUSE_value VA_01 Deflection immediate response 302 VA_02 User busy 486 VA_03 No reply 408 VA_04 Mobile subscriber not reachable 503 TP number TP_305_012A Reference 7.4.6.2.2 table 7.4.6.2.2.2, table 7.4.6.2.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 hi-targeted-to-uri into ACM Generic notification 'Call is diverted' Test Purpose Ensure that on receipt of 180 (Ringing) an ACM is sent. The called party status is set to 'subscriber free'. The History-Info entry following the last History-Info entry containing a Reason header is mapped into the Redirection number: The Generic notification indicator is set to 'Call is diverted' ISUP Parameter values ACM: Called party status=subscriber free Generic Notification call is diverting SIP Parameter values 180: History-Info: <sip:any proper URI?Reason=SIP;cause=any>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine TP number TP_305_013 Reference 7.4.6.2.2 table 7.4.6.2.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 Privacy header into ACM Notification subscription options Test Purpose Ensure that on receipt of 180 (Ringing) containing a Privacy header in the message body, an ACM is sent. The called party status is set to 'subscriber free'. The Notification subscription options in the Call Diversion Information parameter is set according the Privacy header in the message body as indicated in table 6.2.5-11 ISUP Parameter values ACM: Called party status=subscriber free Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 180: Privacy: Priv-value History-Info: <sip:any proper URI?Reason=SIP;cause=any value>; index=1, <sip:any proper URI; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine Table 6.2.5-11: Mapping of Privacy value into Notification subscription options CAUSE Priv-value SUBS_options VA_01 history presentation not allowed VA_02 session presentation not allowed VA_03 header presentation not allowed VA_04 None or absent Presentation allowed with redirection number ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 208 TP number TP_305_014 Reference 7.4.6.2.2 table 7.4.6.2.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 escaped Privacy header into ACM Notification subscription options Test Purpose Ensure that on receipt of 180 (Ringing) containing an escaped Privacy header field in the last hi-targeted-to-uri, an ACM is sent. The called party status is set to 'subscriber free'. The Notification subscription options in the Call Diversion Information parameter is set according the escaped Privacy header in the last History entry as indicated in table 6.2.5-12 ISUP Parameter values ACM: Called party status=subscriber free Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 180: History-Info: <sip:any proper URI?Reason=SIP;cause=any>; index=1, <sip:any proper URI?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine Table 6.2.5-12: Mapping of Privacy value into Notification subscription options CAUSE Priv-value SUBS_options VA_01 history presentation allowed without redirection number VA_02 session presentation allowed without redirection number VA_03 header presentation allowed without redirection number VA_04 None or absent Presentation allowed with redirection number TP number TP_305_015 Reference 7.4.6.2.2 table 7.4.6.2.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 Privacy header into ACM Redirection number restriction Test Purpose Ensure that on receipt of 180 (Ringing) containing a Privacy header in the message body, an ACM is sent. The called party status is set to 'subscriber free'. The Redirection number restriction is set according the Privacy header in the message body as indicated in table 6.2.5-13 ISUP Parameter values ACM: Called party status=subscriber free Redirection number restriction= PRES_restr SIP Parameter values 181: Privacy: Priv-value History-Info: <sip:any proper URI?Reason=SIP;cause=any value>; index=1, <sip:any proper URI >; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 209 TP number TP_305_016 Reference 7.4.6.2.2 table 7.4.6.2.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 escaped Privacy header into ACM Redirection number restriction Test Purpose Ensure that on receipt of 180 (Ringing) containing an escaped Privacy header in the last hi- targeted-to-uri, an ACM is sent. The called party status is set to 'subscriber free'. The Redirection number restriction is set according the escaped Privacy header in the last History entry as indicated in table 6.2.5-13 ISUP Parameter values ACM: Called party status=subscriber free Redirection number restriction= PRES_restr SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=any >; index=1, <sip:any proper URI?Privacy=Priv-value> ; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine Table 6.2.5-13: Mapping of Privacy value into Redirection number restriction CAUSE Priv-value PRES_restr VA_01 history Presentation restricted VA_02 session Presentation restricted VA_03 header Presentation restricted VA_04 None or absent Presentation allowed or absent TP number TP_305_017 Reference 7.4.6.2.2 table 7.4.6.2.2.2 table 7.4.6.2.2.4 table 7.4.6.2.2.9 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 hi-targeted-to-uri into CPG Redirection number and Redirecting Reason Test Purpose Ensure that on receipt of 180 (Ringing) a CPG is sent. The Event indicator is set to 'ALERTING'. The History-Info entry concerning the diverted-to number is mapped into the Redirection number: • If CC is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', the country code is removed from the digit string • If the country code is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' the digit string is used unchanged. ISUP Parameter values CPG: Redirection number Derived from the last History-Info entry Call Diversion Information Redirecting reason= any value SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=any value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine Table 6.2.5-14: Void ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 210 TP number TP_305_017A Reference 7.4.6.2.2 table 7.4.6.2.2.2 table 7.4.6.2.2.4 table 7.4.6.2.2.9 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 hi-targeted-to-uri into CPG Generic notification ‘Call is diverting’ Test Purpose Ensure that on receipt of 180 (Ringing) a CPG is sent. The History-Info entry concerning the diverted-to number is mapped into the Redirection number: The Generic notification indicator is set to ‘Call is diverting’. ISUP Parameter values CPG: Generic Notification call is diverting SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=any value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine TP number TP_305_017B Reference 7.4.6.2.2 table 7.4.6.2.2.2 table 7.4.6.2.2.4 table 7.4.6.2.2.9 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 hi-targeted-to-uri into CPG Event indicator ‘ALERTING’ Test Purpose Ensure that on receipt of 180 (Ringing) a CPG is sent. The History-Info entry concerning the diverted-to number is mapped into the Redirection number: The Event information is set to ‘Alerting’. ISUP Parameter values CPG: Event=ALERTING SIP Parameter values 181: History-Info: <sip:any proper URI?Reason=SIP;cause=any value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 211 TP number TP_305_018 Reference 7.4.6.2.2 table 7.4.6.2.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 Privacy header into CPG Notification subscription options Test Purpose Ensure that on receipt of 180 (Ringing) containing a Privacy header, a CPG is sent. The Notification subscription options in the Call Diversion Information parameter is set according the Privacy header in the message body as indicated in table 6.2.5-15 ISUP Parameter values CPG: Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 180: Privacy: Priv-value History-Info: <sip:any proper URI?Reason=SIP;cause=any value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine Table 6.2.5-15: Mapping of Privacy value into Notification subscription options CAUSE Priv-value SUBS_options VA_01 history presentation not allowed VA_02 session presentation not allowed VA_03 header presentation not allowed VA_04 None or absent Presentation allowed with redirection number TP number TP_305_019 Reference 7.4.6.2.2 table 7.4.6.2.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 escaped Privacy header into CPG Notification subscription options Test Purpose Ensure that on receipt of 180 (Ringing) containing an escaped Privacy header field in the last hi-targeted-to-uri, a CPG is sent. The Notification subscription options in the Call Diversion Information parameter is set according the escaped Privacy header in the last History entry as indicated in table 6.2.5-16 ISUP Parameter values CPG: Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 180: History-Info: <sip:any proper URI?Reason=SIP;cause=any>; index=1, <sip:any proper URI?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine Table 6.2.5-16: Mapping of Privacy value into Notification subscription options CAUSE Priv-value SUBS_options VA_01 history presentation allowed without redirection number VA_02 session presentation allowed without redirection number VA_03 header presentation allowed without redirection number VA_04 None or absent Presentation allowed with redirection number ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 212 TP number TP_305_020 Reference 7.4.6.2.2 table 7.4.6.2.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 Privacy header into CPG Redirection number restriction Test Purpose Ensure that on receipt of 180 (Ringing) containing a Privacy header, a CPG is sent. The Redirection number restriction is set according the Privacy header in the message body as indicated in table 6.2.5-17 ISUP Parameter values CPG: Redirection number restriction= PRES_restr SIP Parameter values 180: Privacy: Priv-value History-Info: <sip:any proper URI?Reason=SIP;cause=any value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine TP number TP_305_021 Reference 7.4.6.2.2 table 7.4.6.2.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 escaped Privacy header into CPG Redirection number restriction Test Purpose Ensure that on receipt of 180 (Ringing), a CPG is sent. The Redirection number restriction is set according the escaped Privacy header in the last History entry as indicated in table 6.2.5-17 ISUP Parameter values CPG: Redirection number restriction= PRES_restr SIP Parameter values 180: History-Info: <sip:any proper URI?Reason=SIP;cause=any>; index=1, <sip:any proper URI?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine Table 6.2.5-17: Mapping of Privacy value into Redirection number restriction CAUSE Priv-value PRES_restr VA_01 history Presentation restricted VA_02 session Presentation restricted VA_03 header Presentation restricted VA_04 None or absent Presentation allowed or absent ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 213 TP number TP_305_022 Reference 7.4.6.2.2 table 7.4.6.2.2.2 table 7.4.6.2.2.10 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 200 hi-targeted-to-uri into ANM Redirection number Test Purpose Ensure that on receipt of 200 OK (INVITE) an ANM is sent. The History-Info entry following the last History-Info entry in the format +'CC+NDC+SN' containing a Reason header is mapped into the Redirection number: • If 'CC' is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', the country code is removed from the digit string • If the 'CC' is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' the digit string is used unchanged. ISUP Parameter values ANM: Redirection number Derived from the last History-Info entry SIP Parameter values 200: History-Info: <sip:any proper URI?Reason=SIP;cause=any value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ANM 200 OK INVITE ACK Apply post test routine TP number TP_305_023 Reference 7.4.6.2.2 table 7.4.6.2.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 200 Privacy header into ANM Redirection number restriction Test Purpose Ensure that on receipt of 200 OK (INVITE) containing a Privacy header, an ANM is sent. The Redirection number restriction is set according the Privacy header in the message body as indicated in table 6.2.5-18 ISUP Parameter values ANM: Redirection number restriction= PRES_restr SIP Parameter values 200: Privacy: Priv-value History-Info: <sip:any proper URI?Reason=SIP;cause=any value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ANM 200 OK INVITE ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 214 TP number TP_305_024 Reference 7.4.6.2.2 table 7.4.6.2.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 200 escaped Privacy header into ANM Redirection number restriction Test Purpose Ensure that on receipt of 200 OK (INVITE), an ANM is sent. The Redirection number restriction is set according the escaped Privacy header in the last History entry as indicated in table 6.2.5-18 ISUP Parameter values ANM: Redirection number restriction= PRES_restr SIP Parameter values 200: History-Info: <sip:any proper URI?Reason=SIP;cause=any>; index=1, <sip:any proper URI?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ANM 200 OK INVITE ACK Apply post test routine TP number TP_305_025 Reference 7.4.6.2.2 table 7.4.6.2.2.2, table 7.4.6.2.2.10 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 200 hi-targeted-to-uri into CON Redirection number Test Purpose Ensure that on receipt of 200 OK (INVITE) a CON is sent. The History-Info entry following the last History-Info entry in the format +'CC+NDC+SN' containing a Reason header is mapped into the Redirection number: • If 'CC' is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', the country code is removed from the digit string • If 'CC' is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' the digit string is used unchanged ISUP Parameter values CON: Redirection number Derived from the last History-Info entry SIP Parameter values 200: History-Info: <sip:any proper URI?Reason=SIP;cause=any value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ANM 200 OK INVITE ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 215 TP number TP_305_026 Reference 7.4.6.2.2 table 7.4.6.2.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 200 Privacy header into CON Redirection number restriction Test Purpose Ensure that on receipt of 200 OK (INVITE) containing a Privacy header, a CON is sent. The Redirection number restriction is set according the Privacy header in the message body as indicated in table 6.2.5-18 ISUP Parameter values CON: Redirection number restriction= PRES_restr SIP Parameter values 200: Privacy: Priv-value History-Info: <sip:any proper URI?Reason=SIP;cause=any value>; index=1, <sip:any proper URI>; index=1.1 <sip:any proper URI>; index=1.2 Comments Message flows ISUP MGCF Mg IAM INVITE ANM 200 OK INVITE ACK Apply post test routine TP number TP_305_027 Reference 7.4.6.2.2 table 7.4.6.2.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of 200 escaped Privacy header into CON Redirection number restriction Test Purpose Ensure that on receipt of 200 OK (INVITE), a CON is sent. The Redirection number restriction is set according the escaped Privacy header in the last History entry as indicated in table 6.2.5-18 ISUP Parameter values ANM: Redirection number restriction= PRES_restr SIP Parameter values 200: History-Info: <sip:any proper URI&Reason=SIP;cause=any>; index=1, <sip:any proper URI?Privacy=Priv-value>; index=1.1 <sip:any proper URI>; index=1.2 Comments Message flows ISUP MGCF Mg IAM INVITE ANM 200 OK INVITE ACK Apply post test routine Table 6.2.5-18: Mapping of Privacy value into Redirection number restriction CAUSE Priv-value PRES_restr VA_01 history Presentation restricted VA_02 session Presentation restricted VA_03 header Presentation restricted VA_04 None or absent Presentation allowed or absent ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 216 TP number TP_305_028 Reference 7.4.6.2.3 table 7.4.6.2.3.1 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of Redirecting number Address Signals Test Purpose Ensure that on receipt of an IAM containing a Redirecting number parameter and a Redirection Information parameter, an INVITE request is sent and a History-Info header is present. The value of the second last hi-targeted-to-uri Value of Redirecting number is mapped from the Redirecting number Address Signals as indicated in table 6.2.5-19 ISUP Parameter values IAM: Redirecting number Nature of Address: NoA_value Address Signals <any appropriate value> Redirection Information Original called number SIP Parameter values INVITE: History-Info: <sip:any proper URI?Reason=SIP;cause=404>; index=1, <sip:Value of Redirecting number?Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.2.5-19: Mapping of Redirecting number into second last Hist-entry NoA_value Value of Redirecting number second last hi-targeted-to-uri VA_01 national (significant) number Add '+' and the country code where the SUT is located to the Address Signal digits of the Redirecting number VA_02 international number Add '+' to the Address Signal digits of the Redirecting number TP number TP_305_029 Reference 7.4.6.2.3 table 7.4.6.2.3.1 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of Redirecting number Address presentation restricted indicator Test Purpose Ensure that on receipt of an IAM containing a Redirecting number parameter, an INVITE request is sent and a History-Info header is present. A Privacy header is escaped in the second last hi-targeted-to-uri and the PRIV_value is mapped from the Address presentation restricted indicator of the Redirecting number as indicated in table 6.2.5-20 ISUP Parameter values IAM: Redirecting number Address presentation restricted indicator: APRI_value Redirection Information Original called number SIP Parameter values INVITE: History-Info: <sip:any proper URI?Reason=SIP;cause=404>; index=1, <sip:any proper URI?Privacy=PRIV_value&Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.2.5-20: Mapping of Redirecting number APRI into Privacy header in the second last Hist-entry APRI_value PRIV_value second last hi-targeted-to-uri VA_01 presentation restricted history VA_02 presentation allowed Header absent or 'none' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 217 TP number TP_305_030 Reference 7.4.6.2.3 table 7.4.6.2.3.1 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of Redirection Information Redirecting indicator Test Purpose Ensure that on receipt of an IAM containing a Redirecting number and a Redirection Information parameter, an INVITE request is sent and a History-Info header is present. A Privacy header is escaped in the second last hi-targeted-to-uri and the PRIV_value is mapped from the Redirecting indicator of the Redirection Information as indicated in table 6.2.5-21 ISUP Parameter values IAM: Redirection Information Redirecting indicator=RDIND_value SIP Parameter values INVITE: History-Info: <sip:any proper URI?Reason=SIP;cause=404>; index=1, <sip:any proper URI?Privacy=PRIV_value&Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.2.5-21: Mapping of Redirecting indicator into Privacy header in the second last Hist-entry RDIND_value PRIV_value second last hi-targeted-to-uri VA_01 Call diverted, all redirection info presentation restricted history VA_02 Call diverted none VA_03 Call diverted AND Redirecting number APRI presentation restricted history TP number TP_305_031 Reference 7.4.6.2.3 table 7.4.6.2.3.1 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of Redirection Information Redirection counter Test Purpose Ensure that on receipt of an IAM containing a Redirecting number and a Redirection Information parameter, an INVITE request is sent and a the hi-targeted-to-uri and the index parameter of the Redirection counter as indicated in table 6.2.5-22 ISUP Parameter values IAM: Redirection Information Redirection counter=RDCONT_value SIP Parameter values INVITE: History-Info: ENTRY_values Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 218 Table 6.2.5-22: Mapping of Redirection counter into index parameter of History-Info header RDCONT_value ENTRY_values VA_01 1 <sip: represents the Original called number>; index=1, <sip: represents the Called party number;cause=any>; index=1.1 VA_02 2 <sip: represents the Original called number>; index=1, <sip: represents the Redirecting number;cause=404>; index=1.1, <sip: represents the Called party number;cause=any>; index=1.1.1 VA_03 3 <sip: represents the Original called number>; index=1, <sip: represents any placeholder value;cause=404>; index=1.1, <sip: represents the Redirecting number;cause=404>; index=1.1.1, <sip: represents the Called party number;cause=any>; index=1.1.1.1 VA_04 4 <sip: represents the Original called number>; index=1, <sip: represents any placeholder value;cause=404>; index=1.1, <sip: represents any placeholder value;cause=404>; index=1.1.1, <sip: represents the Redirecting number;cause=404>; index=1.1.1.1, <sip: represents the Called party number;cause=any>; index=1.1.1.1.1 VA_05 5 <sip: represents the Original called number>; index=1, <sip: represents any placeholder value;cause=404>; index=1.1, <sip: represents any placeholder value;cause=404>; index=1.1.1, <sip: represents any placeholder value;cause=404>; index=1.1.1.1, <sip: represents the Redirecting number;cause=404>; index=1.1.1.1.1, <sip: represents the Called party number;cause=any>; index=1.1.1.1.1.1 TP number TP_305_032 Reference 7.4.6.2.3 table 7.4.6.2.3.1 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of Redirection Information Original redirection reason Test Purpose Ensure that on receipt of an IAM containing a Redirection number an Original called number and a Redirection Information parameter, an INVITE request is sent. The Original redirection reason indicator 'unknown' of the Redirection Information is mapped into the cause parameter value '404' of the first hi-targeted-to-uri of the History-Info header in the sent INVITE. ISUP Parameter values IAM: Redirection Information Original redirection reason=unknown SIP Parameter values INVITE: History-Info: <sip:any proper URI?Reason=SIP;cause=404>; index=1, <sip:any proper URI?Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.2.5-23: Void ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 219 TP number TP_305_033 Reference 7.4.6.2.3 table 7.4.6.2.3.1 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of Redirection Information Redirecting reason Test Purpose Ensure that on receipt of an IAM containing a Redirection number an Original called number and a Redirection Information parameter, an INVITE request is sent. The Redirecting reason indicator REAS_value of the Redirection Information is mapped into the cause parameter Cause_value of the second last hi-targeted-to-uri of the History-Info header in the sent INVITE as indicated in table 6.2.5-24 ISUP Parameter values IAM: Redirection Information Redirecting reason =REAS_value SIP Parameter values INVITE: History-Info: <sip:any proper URI?Reason=SIP;cause=404>; index=1, <sip:any proper URI?Reason=SIP;cause=Cause_value>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.2.5-24: Mapping of Redirecting reason into Reason header in the second last Hist-entry REAS_value Cause_value Second last hi-targeted-to-uri VA_01 unknown 404 VA_02 unconditional 302 VA_03 User Busy 486 VA_04 No reply 408 VA_05 Deflection during alerting 302 VA_06 Deflection immediate response 302 VA_07 Mobile subscriber not reachable 503 TP number TP_305_034 Reference 7.4.6.2.3 table 7.4.6.2.3.1 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of Called party number Address Signals Test Purpose Ensure that on receipt of an IAM containing a Redirecting number parameter and a Redirection Information parameter, an INVITE request is sent and a History-Info header is present. The Called party number is mapped into the last hi-targeted-to-uri of the History-Info header as indicated in table 6.2.5-25 ISUP Parameter values IAM: Called party number Nature of Address: NoA_value Address Signals SIP Parameter values INVITE: History-Info: <sip:any proper URI?Reason=SIP;cause=404>; index=1, <sip:any proper URI?Reason=SIP;cause=any>; index=1.1 <sip:Value of Called party number>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.2.5-25: Mapping of Called party number into last Hist-entry NoA_value Value of Called party number last hi-targeted-to-uri VA_01 national (significant) number Add '+' and the country code where the SUT is located to the Address Signal digits of the Called party number VA_02 international number Add '+' to the Address Signal digits of the Called party number ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 220 TP number TP_305_035 Reference 7.4.6.2.3 table 7.4.6.2.3.1 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of Original called number Address Signals Test Purpose Ensure that on receipt of an IAM containing an Original called number parameter and a Redirection Information parameter, an INVITE request is sent and a History-Info header is present. The value of the first hi-targeted-to-uri Value of Original called number is mapped from the Original called number Address Signals as indicated in table 6.2.5-26 ISUP Parameter values IAM: Original called number Nature of Address: NoA_value Address Signals <Digits> SIP Parameter values INVITE: History-Info: <sip:Original called number?Reason=SIP;cause=404>; index=1 <sip:any proper URI?Reason=SIP;cause=any>; index=1.1 <sip:any proper URI>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.2.5-26: Mapping of Original called number into first Hist-entry NoA_value Value of Original called number First hi-targeted-to-uri VA_01 national (significant) number Add '+' and the country code where the SUT is located to the Address Signal digits of the Original called number VA_02 international number Add '+' to the Address Signal digits of the Original called number TP number TP_305_036 Reference 7.4.6.2.3 table 7.4.6.2.3.1 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of Original called number Address presentation restricted indicator Test Purpose Ensure that on receipt of an IAM containing an Original called number parameter, an INVITE request is sent and a History-Info header is present. A Privacy header escaped in the first hi-targeted-to-uri and the PRIV_value is mapped from the Address presentation restricted indicator of the Original called number as indicated in table 6.2.5-27 ISUP Parameter values IAM: Original called number Address presentation restricted indicator: APRI_value Address Signals <any appropriate value> SIP Parameter values INVITE: History-Info: <sip:any proper URI?Privacy=PRIV_value&Reason=SIP;cause=404>; index=1, <sip:any proper URI?Reason=SIP;cause=any>; index=1.1 <sip:any proper URI>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.2.5-27: Mapping of Original called number APRI into Privacy header in the first Hist-entry APRI_value PRIV_value first hi-targeted-to-uri VA_01 presentation restricted history VA_02 presentation allowed none ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 221 TP number TP_305_037 Reference 7.4.6.3.2 table 7.4.6.3.2.2 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Latest History-Info header field entry containing a Reason header is mapped into Redirecting number Nature of address indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Nature of address indicator of the Redirecting number is mapped from the latest History-Info header field entry in the format +'CC+NDC+SN' containing a Reason header as indicated in table 6.2.5-28 ISUP Parameter values IAM: Redirecting number Nature of address indicator=NoA_value SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip:Second last entry URI?Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.2.5-28: Mapping of second last first Hist-entry into Redirecting number Nature of address indicator Second last entry URI NoA_value VA_01 CC is equal to the country code of the country where MGCF is located AND the next ISUP node is located in the same country national (significant) number VA_02 CC is not equal to the country code of the country where MGCF is located international number TP number TP_305_038 Reference 7.4.6.3.2 table 7.4.6.3.2.2 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Latest History-Info header field entry containing a Reason header is mapped into Redirecting number Address signal Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Address signal of the Redirecting number is mapped from the latest History-Info header field entry in the format +'CC+NDC+SN' containing a Reason header as indicated in table 6.2.5-29 ISUP Parameter values IAM: Redirecting number Address signal derived from the second last Hist-entry SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip:Second last entry URI?Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 222 Table 6.2.5-29: Mapping of second last first Hist-entry into Redirecting number Address signal Second last entry URI NoA_value VA_01 CC is equal to the country code of the country where MGCF is located AND the next ISUP node is located in the same country '+CC' is removed from the userpart digit string used in the Redirecting number Address signal VA_02 CC is not equal to the country code of the country where MGCF is located '+' is removed from the userpart digit string used in the Redirecting number Address signal TP number TP_305_039 Reference 7.4.6.3.2 table 7.4.6.3.2.2 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Latest History-Info header field entry containing a Reason header escaped Privacy header is mapped into Redirecting number Address presentation restricted indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Address presentation restricted indicator of the Redirecting number is mapped from the escaped Privacy header of the latest History-Info header field entry containing a Reason header as indicated in table 6.2.5-30 ISUP Parameter values IAM: Redirecting number Address presentation restricted indicator=APRI_value SIP Parameter values INVITE: History-Info: <sip:any appropriate URI >; index=1, <sip:any proper URI?Privacy=PRIV_value&Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_305_040 Reference 7.4.6.3.2 table 7.4.6.3.2.2 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Privacy header is mapped into Redirecting number Address presentation restricted indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Address presentation restricted indicator of the Redirecting number is mapped from the Privacy header of the received INVITE request as indicated in table 6.2.5-30 ISUP Parameter values IAM: Redirecting number Address presentation restricted indicator=APRI_value SIP Parameter values INVITE: Privacy: PRIV_value History-Info: <sip:any appropriate URI>; index=1, <sip:any proper URI?Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 223 Table 6.2.5-30: Mapping of Privacy header into Redirecting number Address presentation restricted indicator PRIV_value APRI_value VA_01 history presentation restricted VA_02 session presentation restricted VA_03 header presentation restricted VA_04 none presentation allowed VA_05 Header absent presentation allowed TP number TP_305_041 Reference 7.4.6.3.2 table 7.4.6.3.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Escaped Privacy header is mapped into Redirection information Redirecting indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Redirecting indicator of the Redirection information is mapped from the escaped Privacy header of the latest History-Info header field entry containing a Reason header in the received INVITE request as indicated in table 6.2.5-31 ISUP Parameter values IAM: Redirection information Redirecting indicator=RDIND_value SIP Parameter values INVITE: History-Info: <sip:any appropriate URI>; index=1, <sip:any proper URI?Privacy=PRIV_value&Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_305_042 Reference 7.4.6.3.2 table 7.4.6.3.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Privacy header is mapped into Redirection information Redirecting indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Redirecting indicator of the Redirection information is mapped from the Privacy header in the received INVITE request as indicated in table 6.2.5-31 ISUP Parameter values IAM: Redirection information Redirecting indicator=RDIND_value SIP Parameter values INVITE: Privacy: PRIV_value History-Info: <sip:any appropriate URI>; index=1, <sip:any proper URI?Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 224 Table 6.2.5-31: Mapping of Privacy header into Redirecting indicator PRIV_value RDIND_value VA_01 history Call diverted, all redirection info presentation restricted VA_02 session Call diverted, all redirection info presentation restricted VA_03 header Call diverted, all redirection info presentation restricted VA_04 none Call diverted VA_05 Privacy header field absent Call diverted TP number TP_305_043 Reference 7.4.6.3.2 table 7.4.6.3.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name cause value is mapped into Redirection information Redirecting reason Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Redirecting reason of the Redirection information is mapped from the cause parameter of the Reason header of the latest History-Info header field entry containing a Reason header in the received INVITE request as indicated in table 6.2.5-32 ISUP Parameter values IAM: Redirection information Original redirection reason=unknown/not available Redirecting reason=REAS_value SIP Parameter values INVITE: History-Info: <sip:any appropriate URI>; index=1, <sip:any proper URI?Reason=SIP;cause=Cause_value>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.2.5-32: Mapping of cause parameter in the second last Hist-entry into Redirecting reason Cause_value Second last hi-targeted-to-uri REAS_value VA_01 302 Deflection immediate response VA_02 486 User Busy VA_03 408 No reply VA_04 503 Mobile subscriber not reachable VA_05 404 unknown ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 225 TP number TP_305_044 Reference 7.4.6.3.2 table 7.4.6.3.2.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Hi-index is mapped into Redirection information Redirection counter Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Redirection counter of the Redirection information is mapped from the hi-index of the last History-Info header field entry in the received INVITE request as indicated in table 6.2.5-33. The number of dots in the hi-index value is equal to the value of the Redirection counter ISUP Parameter values IAM: Redirection information Redirection counter=RDCONT_value SIP Parameter values INVITE: History-Info: ENTRY_values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.2.5-33: Mapping of Redirection counter into index parameters of History-Info header ENTRY_values RDCONT_value VA_01 <sip: represents the Original called number>; index=1, <sip: represents the Called party number>; index=1.1 1 VA_02 <sip: represents the Original called number>; index=1, <sip: represents the Redirecting number;cause=any>; index=1.1, <sip: represents the Called party number>; index=1.1.1 2 VA_03 <sip: represents the Original called number>; index=1, <sip: any proper URI;cause=404>; index=1.1, <sip: represents the Redirecting number;cause=any>; index=1.1.1, <sip: represents the Called party number>; index=1.1.1.1 3 VA_04 <sip: represents the Original called number>; index=1, <sip: any proper URI;cause=404>; index=1.1, <sip: any proper URI;cause=404>; index=1.1.1, <sip: represents the Redirecting number;cause=any>; index=1.1.1.1, <sip: represents the Called party number>; index=1.1.1.1.1 4 VA_05 <sip: represents the Original called number>; index=1, <sip: any proper URI;cause=404>; index=1.1, <sip: any proper URI;cause=404>; index=1.1.1, <sip: any proper URI;cause=404>; index=1.1.1.1, <sip: represents the Redirecting number;cause=any>; index=1.1.1.1.1, <sip: represents the Called party number>; index=1.1.1.1.1.1 5 ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 226 TP number TP_305_045 Reference 7.4.6.3.2 table 7.4.6.3.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name First History-Info header field entry is mapped into Original called number Nature of address indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Nature of address indicator of the Original called number is mapped from the first History-Info header field entry in the format +'CC+NDC+SN' as indicated in table 6.2.5-34 ISUP Parameter values IAM: Original called number Numbering Plan Indicator=ISDN (Telephony) numbering plan (Recommendation E.164 [i.1]) Nature of address indicator=NoA_value SIP Parameter values INVITE: History-Info: <sip:First entry URI>; index=1, <sip:any proper URI?Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.2.5-34: Mapping of first Hist-entry into Original called number Nature of address indicator First entry URI NoA_value VA_01 CC is equal to the country code of the country where MGCF is located AND the next ISUP node is located in the same country national (significant) number VA_02 CC is not equal to the country code of the country where MGCF is located international number TP number TP_305_046 Reference 7.4.6.3.2 table 7.4.6.3.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name First History-Info header field entry is mapped into Original called Address signal Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Address signal of the Original called number is mapped from the first History-Info header field entry in the format +'CC+NDC+SN' as indicated in table 6.2.5-35. ISUP Parameter values IAM: Original called Numbering Plan Indicator=ISDN (Telephony) numbering plan (Recommendation E.164 [i.1]) Address signal derived from the first Hist-entry SIP Parameter values INVITE: History-Info: <sip:First entry URI>; index=1, <sip:any proper URI?Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 227 Table 6.2.5-35: Mapping of first Hist-entry into Original called number Address signal First entry URI NoA_value VA_01 CC is equal to the country code of the country where MGCF is located AND the next ISUP node is located in the same country '+CC' is removed from the userpart digit string used in the Original called number Address signal VA_02 CC is not equal to the country code of the country where MGCF is located '+' is removed from the userpart digit string used in the Original called number Address signal TP number TP_305_047 Reference 7.4.6.3.2 table 7.4.6.3.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name First History-Info header field entry escaped Privacy header is mapped into Original called number Address presentation restricted indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Address presentation restricted indicator of the Original called number is mapped from the escaped Privacy header of the first History-Info header field entry as indicated in table 6.2.5-36 ISUP Parameter values IAM: Original called Address presentation restricted indicator=APRI_value SIP Parameter values INVITE: History-Info: <sip:any appropriate URI?Privacy=PRIV_value>; index=1, <sip:any proper URI?Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_305_048 Reference 7.4.6.3.2 table 7.4.6.3.2.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Privacy header is mapped into Original called number Address presentation restricted indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Address presentation restricted indicator of the Original called number is mapped from the Privacy header of the received INVITE request as indicated in table 6.2.5-36 ISUP Parameter values IAM: Original called Address presentation restricted indicator=APRI_value SIP Parameter values INVITE: Privacy: PRIV_value History-Info: <sip:any appropriate URI>; index=1, <sip:any proper URI?Reason=SIP;cause=any>; index=1.1, <sip:any proper URI>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 228 Table 6.2.5-36: Mapping of Privacy header into Redirecting number Address presentation restricted indicator PRIV_value APRI_value VA_01 history presentation restricted VA_02 session presentation restricted VA_03 header presentation restricted VA_04 none presentation allowed VA_05 Header absent presentation allowed TP number TP_305_049 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of ACM Redirection number into 181 (Being forwarded) History-Info header Test Purpose Ensure that on receipt of an ACM a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Redirection number is mapped into the hi-targeted-to-uri in a History-Info header containing one hi-entry in the sent 181 as indicated in table 6.2.5-37 ISUP Parameter values ACM: Backward call indicator Called party statue='no indication' Generic notification=call is diverting Call diversion information Redirection number Nature of address indicator=NOA_value Address signal Digits SIP Parameter values 181: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip: LAST_HIST_URI;cause=any>; index=1.1 OR History-Info: <sip:unknown@unknown.invalid?Reason=SIP;cause=any>; index=1, <sip: LAST_HIST_URI>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM Apply post test routine Table 6.2.5-37: Mapping Redirection number into History-Info header NOA_value History-Info header: LAST_HIST_URI VA_01 national (significant) number Add '+' and CC (of the country where the MGCF is located) to Redirection number Address Signals then map to user portion of the last hi-targeted-to-uri in the format '+ CC NDC SN'. VA_01 international number Map complete Redirection number Address Signals and '+' to user portion of the last hi-targeted-to-uri in the format '+ CC NDC SN' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 229 TP number TP_305_050 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.3 TSS reference PSTN-SS/CDIV/ Selection criteria NOT PICS 6.3.5/2 AND PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of ACM Redirecting reason into 181 (Being forwarded) History-Info header cause parameter Test Purpose Ensure that on receipt of an ACM a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Call diversion information Redirecting reason is mapped into the cause parameter of the last hi-targeted-to-uri in a History-Info header in the sent 181 as indicated in table 6.2.5-38 ISUP Parameter values ACM: Backward call indicator Called party statue='no indication' Generic notification=call is diverting Redirection number Call diversion information Redirecting reason =REAS_value SIP Parameter values 181: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip:derived from Redirection number;cause=Cause_value>; index=1.1 or History-Info: <sip:unknown@unknown.invalid?Reason=SIP;cause=Cause_value>; index=1, <sip:derived from Redirection number>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM Apply post test routine Table 6.2.5-38: Mapping of Redirecting reason into cause parameter CAUSE Redirecting_Reason REAS_value Cause parameter, CAUSE_value VA_01 unknown 404 VA_02 unconditional 302 VA_03 User Busy 486 VA_04 No reply 408 VA_05 Deflection during alerting 302 VA_06 Deflection immediate response 302 VA_07 Mobile subscriber not reachable 503 ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 230 TP number TP_305_051 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.5/2 AND PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of ACM Redirecting reason into 181 (Being forwarded) History-Info header Reason header Test Purpose Ensure that on receipt of an ACM a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Call diversion information Redirecting reason is mapped into the Reason header of the second last hi-targeted-to-uri in a History-Info header in the sent 181 as indicated in table 6.2.5-39 ISUP Parameter values ACM: Backward call indicator Called party status=no indication Generic notification=call is diverting Redirection number Call diversion information Redirecting reason =REAS_value SIP Parameter values 181: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip:derived from Redirection number;cause=Cause_value >; index=1.1 or History-Info: <sip:unknown@unknown.invalid?Reason=SIP;cause=Cause_value>; index=1, <sip:derived from Redirection number>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM Apply post test routine Table 6.2.5-39: Mapping of Redirecting reason into Reason header CAUSE Redirecting_Reason REAS_value Reason header, CAUSE_value VA_01 unknown 302 VA_02 unconditional 302 VA_03 User Busy 486 VA_04 No reply 408 VA_05 Deflection during alerting 302 VA_06 Deflection immediate response 302 VA_07 Mobile subscriber not reachable 503 TP number TP_305_052 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of ACM Notification subscription options no 181 (Being forwarded) is sent Test Purpose Ensure that on receipt of an ACM a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, if the Call diversion information Notification subscription options is set to presentation not allowed no 181 (Being forwarded) is sent ISUP Parameter values ACM: Generic notification=call is diverting Redirection number Call diversion information Notification subscription options=presentation not allowed SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM ACM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 231 TP number TP_305_053 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.3 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of ACM Notification subscription options into 181 (Being forwarded) escaped Privacy header Test Purpose Ensure that on receipt of an ACM a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Call diversion information Notification subscription options is mapped into the escaped Privacy header of the last hi-targeted-to-uri in a History-Info header in the sent 181 as indicated in table 6.2.5-40 ISUP Parameter values ACM: Generic notification=call is diverting Redirection number Call diversion information Notification subscription options=NSO_value SIP Parameter values 181: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip:any proper URI;cause=any?Privacy=PRIV_value >;index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM Apply post test routine Table 6.2.5-40: Mapping of Notification subscription options into Privacy header CAUSE NSO_value PRIV_value VA_01 Unknown history VA_02 presentation allowed with redirection number Header not present VA_03 presentation allowed without redirection number history TP number TP_305_054 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of CPG Redirection number into 181 (Being forwarded) History-Info header Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Progress' a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Redirection number is mapped into the last hi-targeted-to-uri in a History-Info header in the sent 181 as indicated in table 6.2.5-37 ISUP Parameter values CPG: Event=Progress Generic notification=call is diverting Call diversion information Redirection number Nature of address indicator=NOA_value Address signal Digits SIP Parameter values 181: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip:LAST_HIST_URI;cause=any>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 181 Being forwarded CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 232 TP number TP_305_055 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.5/2 AND PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of CPG Redirecting reason into 181 (Being forwarded) History-Info header cause parameter Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Progress' a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Call diversion information Redirecting reason is mapped into the cause parameter of the last hi-targeted-to-uri in a History-Info header in the sent 181 as indicated in table 6.2.5-38 ISUP Parameter values CPG: Event=Progress Generic notification=call is diverting Redirection number Call diversion information Redirecting reason =REAS_value SIP Parameter values 181: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip:derived from Redirection number in ACM;cause=Cause_value>; index=1.1 or History-Info: <sip:unknown@unknown.invalid?Reason=SIP;cause=Cause_value>; index=1, <sip:derived from Redirection number>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 181 Being forwarded CPG Apply post test routine TP number TP_305_056 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.5/2 AND PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of CPG Redirecting reason into 181 (Being forwarded) History-Info header Reason header Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Progress' a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Call diversion information Redirecting reason is mapped into the Reason header of the second last hi-targeted-to-uri in a History-Info header in the sent 181 as indicated in table 6.2.5-39 ISUP Parameter values CPG: Event=Progress Generic notification=call is diverting Redirection number Call diversion information Redirecting reason =REAS_value SIP Parameter values 181: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip:derived from Redirection number;cause=Cause_value>; index=1.1 or History-Info: <sip:unknown@unknown.invalid?Reason=SIP;cause=Cause_value>; index=1, <sip: derived from Redirection number>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 181 Being forwarded CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 233 TP number TP_305_057 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of CPG Notification subscription options no 181 (Being forwarded) is sent Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Progress' a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, if the Call diversion information Notification subscription options is set to presentation not allowed no 181 (Being forwarded) is sent ISUP Parameter values CPG: Event=Progress Generic notification=call is diverting Redirection number Call diversion information Notification subscription options=presentation not allowed SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM CPG Apply post test routine TP number TP_305_058 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.4 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of CPG Notification subscription options into 181 (Being forwarded) escaped Privacy header Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Progress' a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Call diversion information Notification subscription options is mapped into the escaped Privacy header of the last hi-targeted-to-uri in a History-Info header in the sent 181 as indicated in table 6.2.5-40 ISUP Parameter values CPG: Event=Progress Generic notification=call is diverting Redirection number Call diversion information Notification subscription options=NSO_value SIP Parameter values 181: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip:any proper URI;cause=any?Privacy=PRIV_value >; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 181 Being forwarded CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 234 TP number TP_305_059 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.5 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of a CPG Alerting Redirection number into 180 (Ringing) History-Info header Redirecting reason is mapped into the cause parameter Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Alerting' a Redirection number is present, a 180 (Ringing) is sent. The Redirection number Address signal digits are mapped into the last hi-targeted-to-uri in a History-Info header in the sent 180 as indicated in table 6.2.5-37 and the cause parameter value in the last entry is mapped from the received Redirecting reason as indicated in table 6.2.5-38 ISUP Parameter values ACM: Backward call indicator Called party status=no indication Optional backward call indicator In-band info or appropriate pattern is now available CPG: Event indicator=Alerting Redirection number Nature of address indicator=NOA_value Address signal Digits Call diversion information Redirecting reason =REAS_value SIP Parameter values 180: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip: LAST_HIST_URI;cause=Cause_value>; index=1.1 or History-Info: <sip:unknown@unknown.invalid >; index=1, <sip: LAST_HIST_URI?Reason=SIP;cause=Cause_value >; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 183 Session Progress ACM 180 Ringing CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 235 TP number TP_305_060 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.5 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of a CPG Alerting Redirection number into 180 (Ringing) History-Info header Redirecting reason in the first entry is mapped from a previous received ACM Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Alerting' a Redirection number is present, a 180 (Ringing) is sent. The Redirection number Address signal digits are mapped into the last hi-targeted-to-uri in a History-Info header in the sent 180 as indicated in table 6.2.5-37 and the cause parameter value is mapped from a previous received Redirecting reason in an ACM as indicated in table 6.2.5-38 ISUP Parameter values ACM: Backward call indicator Called party status=no indication Generic notification=call is diverting Call diversion information Redirecting reason =REAS_value Redirection number CPG: Event indicator=Alerting Redirection number Nature of address indicator=NOA_value Address signal Digits SIP Parameter values 180: History-Info: <sip:unknown@unknown.invalid;cause=Cause_value >; index=1, <sip: LAST_HIST_URI;cause=any>; index=1.1 or History-Info: <sip:unknown@unknown.invalid?Reason=SIP;cause=Cause_value>; index=1, <sip: LAST_HIST_URI;cause=any >; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM 180 Ringing CPG Apply post test routine TP number TP_305_061 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.5 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of CPG Alerting Redirection Number Restriction into 180 (Ringing) Privacy header Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Alerting' a Redirection Number Restriction parameter is present, a 180 (Ringing) is sent. The Redirection Number Restriction parameter value is mapped into the Privacy header in the sent 180 as indicated in table 6.2.5-41. ISUP Parameter values ACM: Backward call indicator Called party status=no indication Generic notification=call is diverting Call diversion information Redirection number CPG: Event indicator=Alerting Redirection Number Restriction=PRES_restr SIP Parameter values 180: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip:any proper URI?Privacy=PRIV_value;cause=any>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM 180 Ringing CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 236 Table 6.2.5-41: Mapping of Redirection Number Restriction parameter into Privacy header CAUSE Redirection Number Restriction PRES_restr Privacy PRIV_value VA_01 Presentation allowed 'none' OR Header not present VA_02 Presentation restricted 'History' TP number TP_305_062 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.6 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of ANM Redirection number into 200 OK History-Info header Redirecting reason is mapped into the cause parameter Test Purpose Ensure that on receipt of an ANM a Redirection number is present, a 200 OK (INVITE) is sent. The Redirection number Address signal digits are mapped into the last hi-targeted-to-uri in a History-Info header in the sent 200 OK as indicated in table 6.2.5-37 and the cause parameter value is mapped from the received Redirecting reason as indicated in table 6.2.5-38 ISUP Parameter values ACM: Backward call indicator Called party status=subscriber free ANM: Generic notification=call is diverting Call diversion information Redirecting reason =REAS_value Redirection number Nature of address indicator=NOA_value Address signal Digits SIP Parameter values 200 OK: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip:LAST_HIST_URI;cause=Cause_value>; index=1.1 or History-Info: <sip:unknown@unknown.invalid?Reason=SIP;cause=Cause_value>; index=1, <sip:LAST_HIST_URI>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 183 Session Progress ACM 200 OK INVITE ANM ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 237 TP number TP_305_063 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.6 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of ANM Redirection number into 200 OK History-Info header a previous received Redirecting reason is mapped into the cause parameter in the first entry. Test Purpose Ensure that on receipt of an ANM a Redirection number is present, a 200 OK (INVITE) is sent. The Redirection number Address signal digits are mapped into the last hi-targeted-to-uri in a History-Info header in the sent 200 as indicated in table 6.2.5-37 and the cause parameter value is mapped from a previous received Redirecting reason as indicated in table 6.2.5-39 ISUP Parameter values CPG: Event information ALERTING Generic notification=call is diverting Call diversion information Redirecting reason =REAS_value Redirection number ANM: Redirection number Nature of address indicator=NOA_value Address signal Digits SIP Parameter values 200 OK: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip: LAST_HIST_URI;cause=Cause_valueany>; index=1.1 or History-Info: <sip:unknown@unknown.invalid?Reason=SIP;cause=Cause_value>; index=1, <sip: LAST_HIST_URI>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 183 Session Progress ACM 180 Ringing CPG 200 OK INVITE ANM ACK Apply post test routine TP number TP_305_064 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.6 TSS reference PSTN-SS/CDIV/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/5 Test Purpose name Mapping of ANM Redirection Number Restriction into 200 OK INVITE Privacy header Test Purpose Ensure that on receipt of an ANM a Redirection Number Restriction parameter is present as an indication a call diversion occurred, a 200 OK INVITE is sent. The Redirection Number Restriction parameter value is mapped into the Privacy header in the sent 180 as indicated in table 6.2.5-41 ISUP Parameter values ACM: Generic notification=call is diverting Call diversion information Generic notification Redirection number ANM: Redirection Number Restriction=PRES_restr SIP Parameter values 200: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip:any proper URI;cause=any?Privacy=PRIV_value >; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM 180 Ringing CPG 200 OK INVITE ANM ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 238 TP number TP_305_065 Reference 7.4.6.1 TSS reference PSTN-SS/CDIV/ Selection criteria NOT PICS 6.3.2/5 Test Purpose name No mapping of Redirecting number, Original called number and Redirection Information Test Purpose Ensure that on receipt of an IAM containing a Redirecting number parameter, a Original called number and a Redirection Information parameter Redirecting reason indicator is set to REAS_value as indicated in table 6.2.5-42, an INVITE request is sent and no History-Info header is present. The call setup is not disrupted ISUP Parameter values IAM: Redirecting number Redirection Information Redirecting reason =REAS_value Original called number SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.2.5-42: Value of Redirecting reason received in Redirection Information REAS_value VA_01 unknown VA_02 unconditional VA_03 User Busy VA_04 Deflection immediate response VA_05 Mobile subscriber not reachable TP number TP_305_066 Reference 7.4.6.3.3 table 7.4.6.3.3.1, table 7.4.6.3.3.3 TSS reference PSTN-SS/CDIV/ Selection criteria NOT PICS 6.3.2/5 Test Purpose name No mapping of ACM Redirection number and Call diversion information Test Purpose Ensure that on receipt of an ACM a Redirection number and the Call diversion parameter the Redirecting reason is set to REAS_value as indicated in table 6.2.5-43 is present as an indication a call diversion occurred, a 180 Ringing is sent and no History-Info header is present. The call setup is not disrupted ISUP Parameter values ACM: Generic notification=call is diverting Redirection number Call diversion information Redirecting reason =REAS_value SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM Apply post test routine Table 6.2.5-43: Value of Redirecting reason received in Call diversion information CAUSE Redirecting_Reason REAS_value VA_01 unknown VA_02 unconditional VA_03 User Busy VA_04 Deflection immediate response VA_05 Mobile subscriber not reachable ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 239
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.6 Explicit Call Transfer (ECT)	TP number TP_306_001 Reference 7.4.8 TSS reference PSTN-SS/ECT/ Selection criteria PICS 6.3.2/6 Test Purpose name A session is retrieved when a notification 'call transfer, active' in a FAC was received and the session is on hold Test Purpose I-MGCF: A session is on hold. Ensure that on receipt of an FAC message and the Generic notification indicator is set to 'call transfer, active', a reINVITE is sent the a attribute in the SDP is set to 'sendrecv' ISUP Parameter values FAC: Generic notification=transfer active SIP Parameter values INVITE 2 SDP a=sendonly INVITE 3 SDP a=sendrecv Comments Message flows Mg MGCF ISUP INVITE 1 IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK INVITE 2 CPG(hold) 200 OK (INVITE) ACK INVITE 3 FAC(call transfer, active) 200 OK (INVITE) ACK Apply post test routine TP number TP_306_002 Reference 7.4.8 TSS reference PSTN-SS/ECT/ Selection criteria PICS 6.3.2/6 Test Purpose name A session is retrieved when a notification 'call transfer, alerting' in a FAC was received and the session is on hold Test Purpose I-MGCF: A session is on hold. Ensure that on receipt of an FAC message and the Generic notification indicator is set to 'call transfer, alerting', no reINVITE is sent. The session is retrieved when a FAC is received the Generic notification set to ‘call transfer active’ subsequently. ISUP Parameter values FAC: Generic notification=transfer alerting SIP Parameter values INVITE 2 SDP a=sendonly INVITE 3 SDP a=sendrecv Comments Message flows Mg MGCF ISUP INVITE 1 IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK INVITE 2 CPG(hold) 200 OK (INVITE) ACK FAC(call transfer, alerting) INVITE 3 FAC(call transfer, active) 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 240 TP number TP_306_003 Reference 7.4.8 TSS reference PSTN-SS/ECT/ Selection criteria PICS 6.3.2/6 Test Purpose name A session is retrieved when a notification 'call transfer, active' in a CPG was received and the session is on hold Test Purpose O-MGCF: A session is on hold. Ensure that on receipt of an CPG message and the Generic notification indicator is set to 'call transfer, active', a reINVITE is sent the a attribute in the SDP is set to 'sendrecv' ISUP Parameter values CPG: Generic notification=transfer active SIP Parameter values INVITE 2 SDP a=sendonly INVITE 3 SDP a=sendrecv Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK INVITE 2 CPG(hold) 200 OK (INVITE) ACK INVITE 3 CPG(call transfer, active) 200 OK (INVITE) ACK Apply post test routine TP number TP_306_004 Reference 7.4.8 TSS reference PSTN-SS/ECT/ Selection criteria PICS 6.3.2/6 Test Purpose name A session is retrieved when a notification 'call transfer, alerting' in a CPG was received and the session is on hold Test Purpose O-MGCF: A session is on hold. Ensure that on receipt of an CPG message and the Generic notification indicator is set to 'call transfer, alerting', no reINVITE is sent. The session is retrieved when a FAC is received the Generic notification set to ‘call transfer active’ subsequently. ISUP Parameter values CPG: Generic notification=transfer alerting SIP Parameter values INVITE 2 SDP a=sendonly INVITE 3 SDP a=sendrecv Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK INVITE 2 CPG(hold) 200 OK (INVITE) ACK CPG(call transfer, alerting) INVITE 3 FAC(call transfer, active) 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 241 TP number TP_306_005 Reference 7.4.8 TSS reference PSTN-SS/ECT/ Selection criteria PICS 6.3.2/6 Test Purpose name FAC with generic notification 'call transfer, active' received, no mapping Test Purpose I-MGCF: Ensure that on receipt of a FAC message and the Generic notification indicator is coded as 'call transfer, active' and the session is not on hold, no mapping occurs on the SIP side ISUP Parameter values FAC: Generic notification=transfer active SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK FAC(call transfer, active) Apply post test routine TP number TP_306_006 Reference 7.4.8 TSS reference PSTN-SS/ECT/ Selection criteria PICS 6.3.2/6 Test Purpose name FAC with generic notification 'call transfer, alerting' received, no mapping Test Purpose I-MGCF: Ensure that on receipt of a FAC message and the Generic notification indicator is coded as 'call transfer, alerting' and the session is not on hold, no mapping occurs on the SIP side ISUP Parameter values FAC: Generic notification=transfer alerting SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK FAC(call transfer, alerting) Apply post test routine TP number TP_306_007 Reference 7.4.8 TSS reference PSTN-SS/ECT/ Selection criteria PICS 6.3.2/6 Test Purpose name CPG with generic notification 'call transfer, active' received, no mapping Test Purpose I-MGCF: Ensure that on receipt of a CPG message and the Generic notification indicator is coded as 'call transfer, active' and the session is not on hold, no mapping occurs on the SIP side ISUP Parameter values CPG: Generic notification=transfer active SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK CPG(call transfer, active) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 242 TP number TP_306_008 Reference 7.4.8 TSS reference PSTN-SS/ECT/ Selection criteria PICS 6.3.2/6 Test Purpose name CPG with generic notification 'call transfer, alerting' received, no mapping Test Purpose I-MGCF: Ensure that on receipt of a CPG message and the Generic notification indicator is coded as 'call transfer, alerting' and the session is not on hold, no mapping occurs on the SIP side ISUP Parameter values CPG: Generic notification=transfer alerting SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK CPG(call transfer, alerting) Apply post test routine
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.7 Call Waiting	TP number TP_307_001 Reference 7.4.9 TSS reference PSTN-SS/CW/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/7 Test Purpose name Generic notification 'Call is a waiting call' in ACM is not interworked Test Purpose Ensure that on receipt of an ACM and the called party status indicator is set to 'subscriber free', a 180 Ringing is sent. The Generic notification 'Call is a waiting call' is not interworked ISUP Parameter values ACM: BCI Called party Status=subscriber free, Generic notification=Call is a waiting call SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM Apply post test routine TP number TP_307_002 Reference 7.4.9 TSS reference PSTN-SS/CW/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/7 Test Purpose name Generic notification 'Call is a waiting call' in CPG is not interworked Test Purpose An ACM called party status 'no indication' was received. Ensure that on receipt of a CPG and the Event indication is set to 'Alerting', a 180 Ringing is sent. The Generic notification 'Call is a waiting call' is not interworked. ISUP Parameter values ACM: BCI Called party Status=no indication, oBCI=inband info available CPG: Event indication=ALERTING, Generic notification=Call is a waiting call SIP Parameter values 183 P-Early-Media: Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying ACM(no indication) 180 Ringing CPG(ALERTING) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 243
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.8 Call Hold	TP number TP_308_001 Reference 7.4.10 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 Test Purpose name Hold and Retrieve requested from the ISUP Test Purpose Ensure that on receipt of a CPG message and the Generic notification is set to 'Remote hold' in the confirmed dialogue, an INVITE or UPDATE is sent. The media stream in the SDP is set to 'sendonly'. Ensure that on receipt of a CPG message and the Generic notification is set to 'Remote retrieval', an INVITE or UPDATE is sent. The media stream in the SDP is set to 'sendrecv' ISUP Parameter values CPG: Generic notification Remote hold Remote retrieval SIP Parameter values INVITE/UPDATE: SDP 1 a=sendonly SDP 2 a=sendrecv Comments Message flows Mg MGCF ISUP Establish a confirmed dialogue CASE A INVITE(SDP 1 = sendonly) CPG(hold) 200 OK (INVITE) ACK CASE B UPDATE(SDP 1 = sendonly) 200 OK (UPDATE) CASE A INVITE(SDP 2 = sendrecv) CPG(retrieve) 200 OK (INVITE) ACK CASE B UPDATE(SDP 2 = sendrecv) 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 244 TP number TP_308_002 Reference 7.4.10 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 Test Purpose name Hold and Retrieve requested from SIP in reINVITE request Test Purpose Ensure that on receipt of an INVITE request in the confirmed dialogue and the media stream in the SDP is set to 'sendonly', a CPG message is sent the Generic notification indicator is set to 'remote hold'. Ensure that on receipt of an INVITE request in the confirmed dialogue and the media stream in the SDP is set to 'sendrecv', a CPG message is sent the Generic notification indicator is set to 'remote retrieval' ISUP Parameter values CPG: Generic notification Remote hold Remote retrieval SIP Parameter values INVITE/UPDATE: SDP 1 a=sendonly SDP 2 a=sendrecv Comments Message flows Mg MGCF ISUP Establish a confirmed dialogue INVITE(sendonly) CPG(hold) 200 OK (INVITE) ACK INVITE(sendrecv) CPG(retrieve) 200 OK (INVITE) ACK Apply post test routine TP number TP_308_003 Reference 7.4.10 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 Test Purpose name Hold and Retrieve requested from SIP in UPDATE request Test Purpose Ensure that on receipt of an UPDATE request in the confirmed dialogue and the media stream in the SDP is set to 'sendonly', a CPG message is sent the Generic notification indicator is set to 'remote hold'. Ensure that on receipt of an UPDATE request in the confirmed dialogue and the media stream in the SDP is set to 'sendrecv', a CPG message is sent the Generic notification indicator is set to 'remote retrieval' ISUP Parameter values CPG: Generic notification Remote hold Remote retrieval SIP Parameter values INVITE/UPDATE: SDP 1 a=sendonly SDP 2 a=sendrecv Comments Message flows Mg MGCF ISUP Establish a confirmed dialogue UPDATE(sendonly) CPG(hold) 200 OK (UPDATE) ACK UPDATE(sendrecv) CPG(retrieve) 200 OK (UPDATE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 245 TP number TP_308_004 Reference 7.4.10 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 Test Purpose name Hold requested from both ends, session inactive sent Test Purpose Ensure that on receipt of a CPG message and the Generic notification indicator is set to 'remote hold' und the session was set on hold before, an INVITE or UPDATE request is sent and the media stream is set to 'inactive' ISUP Parameter values CPG: Generic notification Remote hold SIP Parameter values INVITE/UPDATE: SDP 1 a=sendonly SDP 2 a=inactive Comments Message flows Mg MGCF ISUP Establish a confirmed dialogue INVITE(SDP 1 = sendonly) CPG(hold) 200 OK (INVITE) ACK CASE A INVITE(SDP 2 = inactive) CPG(hold) 200 OK (INVITE) ACK CASE B UPDATE(SDP 2 = inactive) 200 OK (UPDATE) Apply post test routine TP number TP_308_005 Reference 7.4.10 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 Test Purpose name Hold requested from both ends, session inactive received Test Purpose The session is already set on hold. Ensure that on receipt of an INVITE request and the media stream in the SDP is set to 'inactive', a CPG message is sent and the Notification indicator is set to 'remote hold' ISUP Parameter values CPG: Generic notification Remote hold SIP Parameter values INVITE/UPDATE: SDP 1 a=sendonly SDP 2 a=inactive Comments Message flows Mg MGCF ISUP Establish a confirmed dialogue CASE A INVITE(SDP 1 = sendonly) CPG(hold) 200 OK (INVITE) ACK CASE B UPDATE(SDP 1 = sendonly) 200 OK (UPDATE) INVITE(SDP 2 = inactive) CPG(hold) 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 246 TP number TP_308_006 Reference 7.4.10 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 Test Purpose name First hold from SIP. Session inactive, Retrieve requested from SIP Test Purpose The session is set on hold at first from SIP as well as second from ISUP. Ensure that on receipt of an INVITE request and the media stream in the SDP is set to 'recvonly', a CPG message is sent and the Generic notification indicator is set to 'remote retrieval' ISUP Parameter values CPG 1: Generic notification Remote hold CPG 2: Generic notification Remote retrieval SIP Parameter values INVITE/UPDATE: SDP 1 a=sendonly SDP 2 a=inactive SDP 3 a=recvonly Comments Message flows Mg MGCF ISUP Establish a confirmed dialogue INVITE(SDP 1 = sendonly) CPG 1 (hold) 200 OK (INVITE) ACK CASE A INVITE(SDP 2 = inactive) CPG 1 (hold) 200 OK (INVITE) ACK CASE B UPDATE(SDP 2 = inactive) 200 OK (UPDATE) INVITE(SDP 3 = recvonly) CPG 2 (retrieve) 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 247 TP number TP_308_007 Reference 7.4.10 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 Test Purpose name First hold from SIP. Session inactive, Retrieve requested from ISUP Test Purpose The session is set on hold at first from SIP as well as second from ISUP. Ensure that on receipt of a CPG message and the Generic notification indicator is set to 'remote retrieval', an INVITE or UPDATE request is sent and the media stream in the SDP I set to 'recvonly' ISUP Parameter values CPG: Generic notification Remote hold SIP Parameter values INVITE/UPDATE: SDP 1 a=sendonly SDP 2 a=inactive SDP 3 a=recvonly Comments Message flows Mg MGCF ISUP Establish a confirmed dialogue INVITE(SDP 1 = sendonly) CPG(hold) 200 OK (INVITE) ACK CASE A INVITE(SDP 2 = inactive) CPG(hold) 200 OK (INVITE) ACK CASE B UPDATE(SDP 2 = inactive) 200 OK (UPDATE) CASE A INVITE(SDP 3 = recvonly) CPG(retrieve) 200 OK (INVITE) ACK CASE B UPDATE(SDP 3 = recvonly) 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 248 TP number TP_308_008 Reference 7.4.10 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 Test Purpose name First hold from ISUP. Session inactive, Retrieve requested from SIP Test Purpose The session is set on hold at first from ISUP as well as second from SIP. Ensure that on receipt of an INVITE request and the media stream in the SDP is set to 'recvonly', a CPG message is sent and the Generic notification indicator is set to 'remote retrieval' ISUP Parameter values CPG: Generic notification Remote hold SIP Parameter values INVITE/UPDATE: SDP 1 a=sendonly SDP 2 a=inactive SDP 3 a=recvonly Comments Message flows Mg MGCF ISUP Establish a confirmed dialogue CASE A INVITE(SDP 1 = sendonly) CPG(hold) 200 OK (INVITE) ACK CASE B UPDATE(SDP 1 = sendonly) 200 OK (UPDATE) INVITE(SDP 2 = inactive) CPG(hold) 200 OK (INVITE) ACK INVITE(SDP 3 = recvonly) CPG(retrieve) 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 249 TP number TP_308_009 Reference 7.4.10 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 Test Purpose name First hold from ISUP. Session inactive, Retrieve requested from ISUP Test Purpose The session is set on hold at first from ISUP as well as second from SIP. Ensure that on receipt of a CPG message and the Generic notification indicator is set to 'remote retrieval', an INVITE or UPDATE request is sent and the media stream in the SDP is set to 'recvonly' ISUP Parameter values CPG: Generic notification Remote hold SIP Parameter values INVITE/UPDATE: SDP 1 a=sendonly SDP 2 a=inactive SDP 3 a=recvonly Comments Message flows Mg MGCF ISUP Establish a confirmed dialogue CASE A INVITE(SDP 1 = sendonly) CPG(hold) 200 OK (INVITE) ACK CASE B UPDATE(SDP 1 = sendonly) 200 OK (UPDATE) INVITE(SDP 2 = inactive) CPG(hold) 200 OK (INVITE) ACK CASE A INVITE(SDP 3 = recvonly) CPG(retrieve) 200 OK (INVITE) ACK CASE B UPDATE(SDP 3 = recvonly) 200 OK (UPDATE) Apply post test routine TP number TP_308_010 Reference 7.4.10.2 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 AND PICS 6.3.6/1 Test Purpose name CPG hold received before an dialogue was established UPDATE is sent in early dialogue Test Purpose Ensure that on receipt of a CPG message and the Generic notification indicator is set to 'remote hold' before an early dialogue is established, the UPDATE request indicating the hold indication is sent after the early dialogue by receiving a 180 Ringing is established. The media stream in the SDP is set to sendonly indicating the hold state ISUP Parameter values CPG: Generic notification Remote hold SIP Parameter values UPDATE: SDP a=sendonly Comments A CPG is received after an ACM was sent. Message flows ISUP MGCF Mg IAM Start Ti/w2 INVITE 100 Trying ACM Timeout Ti/w2 CPG(hold) 180 Ringing UPDATE(sendonly) 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 250 TP number TP_308_011 Reference 7.4.10.2 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 AND PICS 6.3.6/1 Test Purpose name CPG hold received before an dialogue was established UPDATE is sent in confirmed dialogue Test Purpose Ensure that on receipt of a CPG message and the Generic notification indicator is set to 'remote hold' before an early dialogue is established, the INVITE or UPDATE request indicating the hold indication is sent after the confirmed dialogue by receiving a 200 OK (INVITE) is established. The media stream in the SDP is set to sendonly indicating the hold state ISUP Parameter values CPG: Generic notification Remote hold SIP Parameter values INVITE/UPDATE: SDP a=sendonly Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying CPG(hold) CON 200 OK (INVITE) ACK CASE A INVITE(sendonly) 200 OK (INVITE) ACK CASE B UPDATE(sendonly) 200 OK (UPDATE) Apply post test routine TP number TP_308_012 Reference 7.4.10.2 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 AND PICS 6.3.6/1 Test Purpose name CPG hold received after several early dialogues was established UPDATE is sent on the last established early dialogue Test Purpose Two early dialogues are established. Ensure that on receipt of a CPG message and the Generic notification indicator is set to 'remote hold', an UPDATE request is sent on the latest established early dialogue ISUP Parameter values CPG: Generic notification Remote hold SIP Parameter values 180 1: To: <appropriate URI>; tag=1 180 1: To: <appropriate URI>; tag=2 UPDATE: To: <appropriate URI>; tag=2 Comments For all dialogues the Call-ID and the From tag are equal. The different dialogues can be distinguished by the To tag Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing 1 180 Ringing 2 CPG(hold) UPDATE 2 (sendonly) 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 251 TP number TP_308_013 Reference 7.4.10.2 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 AND PICS 6.3.6/1 Test Purpose name An UPDATE (hold) is repeated in the early dialogue after SDP offer answer exchange Test Purpose Ensure that on receipt of an UPDATE request after the session was set on hold indicating a new SDP, an UPDATE request is sent and the media stream is set to 'sendonly' to refresh the previous held state ISUP Parameter values CPG: Generic notification Remote hold SIP Parameter values INVITE: SDP1 UPDATE 1: SDP a=sendonly UPDATE 2: SDP 2 Comments Message flows ISUP MGCF Mg IAM INVITE(SDP1) ACM 180 Ringing CPG(hold) UPDATE 1 (sendonly) 200 OK (UPDATE) UPDATE 2 (SDP2) 200 OK (UPDATE) UPDATE 1 (sendonly) 200 OK (UPDATE) Apply post test routine TP number TP_308_014 Reference 7.4.10.2 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 AND PICS 6.3.6/1 Test Purpose name An UPDATE (hold) is sent after an additional early dialogue is established Test Purpose An early dialogue is established and set on hold. Ensure that on receipt of a 180 Ringing establish a new early dialogue, an UPDATE request is sent on this dialogue and the media stream is set to 'sendonly' ISUP Parameter values CPG: Generic notification Remote hold SIP Parameter values 180 1: To: <appropriate URI>; tag=1 180 1: To: <appropriate URI>; tag=2 UPDATE 2: To: <appropriate URI>; tag=2 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing 1 CPG(hold) UPDATE 1 (sendonly) 200 OK (UPDATE) 180 Ringing 2 UPDATE 2 (sendonly) 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 252 TP number TP_308_015 Reference 7.4.10.2 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 AND PICS 6.3.6/1 Test Purpose name An INVITE or UPDATE (hold condition) is sent after 200 OK INVITE was received when a CPG (hold) was received in early dialogue Test Purpose A CPG indicating Hold was received in the early dialogue. Ensure that on receipt of a 200 OK (INVITE) establishing the confirmed dialogue, an INVITE or UPDATE request is sent and the media stream is set to 'sendonly' indicating the held state ISUP Parameter values CPG: Generic notification Remote hold SIP Parameter values INVITE/UPDATE 2: SDP a=sendonly Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG(hold) UPDATE(sendonly) 200 OK (UPDATE) ANM 200 OK (INVITE) ACK CASE A INVITE 2 (sendonly) 200 OK (INVITE) ACK CASE B UPDATE 2 (sendonly) 200 OK (UPDATE) Apply post test routine TP number TP_308_016 Reference 7.4.10 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 AND PICS 6.3.6/1 Test Purpose name 'sendonly' and 'sendrecv' received from the terminating SIP user in the early dialogue Test Purpose Ensure that on receipt of an UPDATE request in the early dialogue and the media stream is set to 'sendonly' a CPG message is sent and the Generic notification indicator is set to 'remote hold'. Ensure that on receipt of an UPDATE request in the early dialogue and the media stream is already set on hold the media stream is set to 'sendrecv' in the received UPDATE, a CPG message is sent and the Generic notification indicator is set to 'remote retrieval' ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg I IAM INVITE 100 Trying ACM 180 Ringing CPG(hold) UPDATE(sendonly) 200 OK (UPDATE) CPG(retrieve) UPDATE(sendrecv) 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 253 TP number TP_308_017 Reference 7.4.2 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 AND PICS 6.3.6/1 Test Purpose name 'sendonly' and 'sendrecv' received from the originating SIP user in the early dialogue Test Purpose Ensure that on receipt of an UPDATE request in the early dialogue and the media stream is set to 'sendonly', a CPG message is sent and the Generic notification indicator is set to 'remote hold'. Ensure that on receipt of an UPDATE request in the early dialogue and the media stream is set to 'sendonly' the session is already set on hold, a CPG message is sent and the Generic notification indicator is set to 'remote retrieval' ISUP Parameter values SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM UPDATE(sendonly) CPG(hold) 200 OK (UPDATE) UPDATE(sendrecv) CPG(retrieve) 200 OK (UPDATE) Apply post test routine TP number TP_308_018 Reference 7.4.10 TSS reference PSTN-SS/HOLD/ Selection criteria (PICS 6.3.1/1 OR PICS 6.3.1/2) AND PICS 6.3.2/9 AND PICS 6.3.6/1 Test Purpose name 'hold' and 'retrieve' received from the originating PSTN user in the early dialogue Test Purpose Ensure that on receipt of a CPG message and the Generic notification indicator is set to 'remote hold' in the early dialogue, an UPDATE request is sent and the mediastream is set to 'sendonly'. Ensure that on receipt of a CPG message and the Generic notification indicator is set to 'remote retrieval' and the session is already set on hold, an UPDATE request is sent and the media stream is set to 'sendrecv' ISUP Parameter values SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing CPG(hold) UPDATE(sendonly) 200 OK (UPDATE) CPG(retrieve) UPDATE(sendrecv) 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 254
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.9 Call Completion on busy subscriber	TP number TP_309_001 Reference 7.4.11 TSS reference PSTN-SS/CCBS/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/10 Test Purpose name The diagnostic field is not interworked Test Purpose Ensure that on receipt of an REL message cause #17 and a diagnostic field is present set to 'CCBS possible', a final SIP response 486 Busy Here is sent no indication of CCBS facility is present ISUP Parameter values REL: Cause indicator CCBS possible indicator=CCBS possible SIP Parameter values Comments The CCBS possible indicator is contained in the diagnostic field of the Cause indicator Message flows Mg MGCF ISUP INVITE IAM 100 Trying 486 Busy Here REL(17) ACK RLC
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.10 Completion of Calls on No Reply (CCNR)	TP number TP_310_001 Reference 7.4.12 TSS reference PSTN-SS/CCNR/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/11 Test Purpose name CCNR possible indication received in an ACM, discarded Test Purpose Ensure that on receipt of an ACM and a CCNR possible indicator is present the value set to 'CCNR possible', a 180 Ringing is sent without indication of CCNR facility ISUP Parameter values ACM: BCI called party status indicator=subscriber free, CCNR Possible Indicator=CCNR possible SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM Apply post test routine TP number TP_310_002 Reference 7.4.12 TSS reference PSTN-SS/CCNR/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/11 Test Purpose name CCNR possible indication received in an CPG, discarded Test Purpose Ensure that on receipt of an CPG and a CCNR possible indicator is present the value set to 'CCNR possible', a 180 Ringing is sent without indication of CCNR facility ISUP Parameter values ACM: BCI called party status indicator=no indication, oBCI=inband info available CPG: Event indicator= ALERTING, CCNR Possible Indicator=CCNR possible SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying ACM(no indication) 180 Ringing CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 255
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.11 Terminal Portability (TP)	TP number TP_311_001 Reference 7.4.13 TSS reference PSTN-SS/TP/ Selection criteria PICS 6.3.2/12 Test Purpose name SUS user initiated is mapped into an reINVITE SDP sendonly Test Purpose Ensure that on receipt of an SUS message and the Suspend/Resume indicator is set to 'ISDN subscriber initiated', a reINVITE is sent and the media stream indicated in the SDP is set to 'sendonly' ISUP Parameter values SUS: Suspend/Resume ISDN subscriber initiated SIP Parameter values INVITE: SDP a=sendonly Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK INVITE(sendonly) SUS(user) 200 OK (INVITE) ACK Apply post test routine TP number TP_311_002 Reference 7.4.13 TSS reference PSTN-SS/TP/ Selection criteria PICS 6.3.2/12 Test Purpose name RES user initiated is mapped into an reINVITE SDP sendrecv Test Purpose A SUS message and the Suspend/Resume indicator is set to 'ISDN subscriber initiated' was received. Ensure that on receipt of an RES message and the Suspend/Resume indicator is set to 'ISDN subscriber initiated', a reINVITE is sent and the media stream indicated in the SDP is set to 'sendrecv' ISUP Parameter values RES: Suspend/Resume ISDN subscriber initiated SIP Parameter values INVITE: SDP a=sendrecv Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK INVITE(sendonly) SUS(user) 200 OK (INVITE) ACK INVITE(sendrecv) RES(user) 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 256
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.12 Conference calling (CONF) / Three-Party Service (3PTY)	TP number TP_312_001 Reference 7.4.14 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/13 Test Purpose name I-MGCF: Session not on hold, notification 'conference established' Test Purpose A session at the I-MGCF is in the confirmed state and not set on hold. Ensure that on receipt of a CPG message the Generic notification indicator is set to 'Conference established' no reINVITE is sent ISUP Parameter values CPG: Generic notification Conference established SIP Parameter values Comments This state is applicable for CONF and 3PTY Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK CPG Apply post test routine TP number TP_312_002 Reference 7.4.14 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/13 Test Purpose name O-MGCF: Session not on hold, notification 'conference established' Test Purpose A session at the O-MGCF is in the confirmed state and not set on hold. Ensure that on receipt of a CPG message the Generic notification indicator is set to 'Conference established' no reINVITE is sent ISUP Parameter values CPG: Generic notification= Conference established SIP Parameter values Comments This state is applicable for CONF and 3PTY Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 257 TP number TP_312_003 Reference 7.4.14 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/13 Test Purpose name I-MGCF: Session on hold, notification 'conference established' Test Purpose A session at the I-MGCF is in the confirmed state and set on hold. Ensure that on receipt of a CPG message the Generic notification indicator is set to 'Conference established' a reINVITE request is sent the 'a' attribute in the SDP is set to 'sendrecv' ISUP Parameter values CPG 1: Generic notification Remote hold CPG 2: Generic notification Conference established SIP Parameter values INVITE 1: SDP a=sendonly INVITE 2: SDP a=sendrecv Comments This state is applicable for 3PTY Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK INVITE 1 (sendonly) CPG 1 200 OK INVITE (recvonly) ACK INVITE 2 (sendrecv) CPG 2 200 OK INVITE (sendrecv) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 258 TP number TP_312_004 Reference 7.4.14 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/13 Test Purpose name O-MGCF: Session on hold, notification 'conference established' Test Purpose A session at the O-MGCF is in the confirmed state and set on hold. Ensure that on receipt of a CPG message the Generic notification indicator is set to 'Conference established' a reINVITE request is sent the 'a' attribute in the SDP is set to 'sendrecv' ISUP Parameter values CPG 1: Generic notification Remote hold CPG 2: Generic notification Conference established SIP Parameter values INVITE 1: SDP a=sendonly INVITE 2: SDP a=sendrecv Comments This state is applicable for 3PTY Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK CPG 1 INVITE 1 (sendonly) 200 OK INVITE (recvonly) ACK CPG 2 INVITE 2 (sendrecv) 200 OK INVITE (sendrecv) ACK Apply post test routine TP number TP_312_005 Reference 7.4.14 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/13 Test Purpose name I-MGCF: Session not on hold, notification 'Conference disconnected' Test Purpose A session at the I-MGCF is in the confirmed state not set on hold and a conference is established. Ensure that on receipt of a CPG message the Generic notification indicator is set to 'Conference disconnected' no reINVITE is sent ISUP Parameter values CPG 1: Generic notification Conference established CPG 2: Generic notification Conference disconnected SIP Parameter values Comments This state is applicable for CONF and 3PTY Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK CPG 1 CPG 2 Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 259 TP number TP_312_006 Reference 7.4.14 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/13 Test Purpose name O-MGCF: Session not on hold, notification 'Conference disconnected' Test Purpose A session at the O-MGCF is in the confirmed state not set on hold and a conference is established. Ensure that on receipt of a CPG message the Generic notification indicator is set to 'Conference disconnected' no reINVITE is sent ISUP Parameter values CPG 1: Generic notification Conference established CPG 2: Generic notification Conference disconnected SIP Parameter values Comments This state is applicable for CONF and 3PTY Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK CPG 1 CPG 2 Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 260 TP number TP_312_007 Reference 7.4.14 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/13 Test Purpose name I-MGCF: Session on hold, notification 'Conference disconnected' Test Purpose A session at the I-MGCF is in the confirmed state set on hold and a conference is established. Ensure that on receipt of a CPG message the Generic notification indicator is set to 'Conference disconnected' a reINVITE request is sent the 'a' attribute in the SDP is set to 'sendonly' ISUP Parameter values CPG 1: Generic notification Remote hold CPG 2: Generic notification Conference established CPG 3: Generic notification Conference disconnected SIP Parameter values INVITE 1: SDP a=sendonly INVITE 2: SDP a=sendrecv INVITE 3: SDP a=sendonly Comments This state is applicable for 3PTY Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK INVITE 1 (sendonly) CPG 1 200 OK INVITE (recvonly) ACK INVITE 2 (sendrecv) CPG 2 200 OK INVITE (sendrecv) ACK INVITE 3 (sendonly) CPG 3 200 OK INVITE (recvonly) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 261 TP number TP_312_008 Reference 7.4.14 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/13 Test Purpose name O-MGCF: Session on hold, notification 'Conference disconnected' Test Purpose A session at the O-MGCF is in the confirmed state set on hold and a conference is established. Ensure that on receipt of a CPG message the Generic notification indicator is set to 'Conference disconnected' a reINVITE request is sent the 'a' attribute in the SDP is set to 'sendonly' ISUP Parameter values CPG 1: Generic notification Remote hold CPG 2: Generic notification Conference established CPG 3: Generic notification Conference disconnected SIP Parameter values INVITE 1: SDP a=sendonly INVITE 2: SDP a=sendrecv INVITE 1: SDP a=sendonly Comments This state is applicable for 3PTY Message flows ISUP MGCF Mg A conference is established IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK CPG 1 INVITE 1 (sendonly) 200 OK INVITE (recvonly) ACK CPG 2 INVITE 2 (sendrecv) 200 OK INVITE (sendrecv) ACK CPG 3 INVITE 3 (sendonly) 200 OK INVITE (recvonly) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 262 TP number TP_312_009 Reference 7.4.14 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/13 Test Purpose name I-MGCF: notification 'isolated' and 'reattached' interworked Test Purpose A conference at the I-MFCF is established. Ensure that on receipt of a CPG message the Generic notification indicator is set to 'isolated' a reINVITE request is sent the 'a' attribute in the SDP is set to 'sendonly'. Subsequently on receipt of a CPG message the Generic notification indicator is set to 'reattached' a reINVITE request is sent the 'a' attribute in the SDP is set to 'sendrecv' ISUP Parameter values CPG 1: Generic notification Conference established CPG 2: Generic notification isolated CPG 3: Generic notification reattached SIP Parameter values INVITE 1: SDP a=sendonly INVITE 2: SDP a=sendrecv Comments This state is applicable for CONF Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK CPG 1 INVITE 1 (sendonly) CPG 2 200 OK INVITE (recvonly) ACK INVITE 2 (sendrecv) CPG 3 200 OK INVITE (sendrecv) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 263 TP number TP_312_010 Reference 7.4.14 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/13 Test Purpose name O-MGCF: notification 'isolated' and 'reattached' interworked Test Purpose A conference at the O-MFCF is established. Ensure that on receipt of a CPG message the Generic notification indicator is set to 'isolated' a reINVITE request is sent the 'a' attribute in the SDP is set to 'sendonly'. Subsequently on receipt of a CPG message the Generic notification indicator is set to 'reattached' a reINVITE request is sent the 'a' attribute in the SDP is set to 'sendrecv' ISUP Parameter values CPG 1: Generic notification Conference established CPG 2: Generic notification isolated CPG 3: Generic notification reattached SIP Parameter values INVITE 1: SDP a=sendonly INVITE 2: SDP a=sendrecv Comments This state is applicable for CONF Message flows ISUP MGCF Mg IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK CPG 1 CPG 2 INVITE 1 (sendonly) 200 OK INVITE (recvonly) ACK CPG 3 INVITE 2 (sendrecv) 200 OK INVITE (sendrecv) ACK Apply post test routine
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.13 Closed User Group (CUG)	TP number TP_313_001 Reference 7.4.16 TSS reference PSTN-SS/CUG/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/14 Test Purpose name oFCi CUG outgoing access allowed call successful Test Purpose Ensure that on receipt of an IAM the optional Forward call indicator is set to 'CUG with outgoing access allowed' an INVITE is sent. No CUG information is present in the INVITE ISUP Parameter values IAM: Optional Forward Call indicator: CUG with outgoing access allowed SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 264 TP number TP_313_002 Reference 7.4.16 TSS reference PSTN-SS/CUG/ Selection criteria PICS 6.3.1/1 AND PICS 6.3.2/14 Test Purpose name oFCi CUG outgoing access not allowed Test Purpose Ensure that on receipt of an IAM the optional Forward call indicator is set to 'CUG with outgoing access not allowed' a REL message is sent the cause value is set to 29 and diagnostics indicating CUG without access is sent towards the originating exchange ISUP Parameter values IAM: Optional Forward Call indicator: CUG with outgoing access not allowed REL: Cause value (if sent) 29 Diagnostics=CUG without access SIP Parameter values Comments Message flows ISUP MGCF Mg IAM REL #29 RLC
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.14 Multi-Level Precedence and Pre-emption (MLPP)	TP number TP_314_001 Reference 7.4.17 TSS reference PSTN-SS/MLPP/ Selection criteria PICS 6.3.2/15 Test Purpose name Precedence parameter received in IAM, discarded Test Purpose Ensure that on receipt of an IAM and a Precedence parameter is present, this parameter is discarded without affect the ongoing call setup ISUP Parameter values IAM: Precedence SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_314_002 Reference 7.4.17 TSS reference PSTN-SS/MLPP/ Selection criteria PICS 6.3.2/15 Test Purpose name A REL cause #9 terminates an early dialogue Test Purpose Ensure that on receipt of a REL message in an early dialogue at the O-MGCF and the Cause value is set to '9', a CANCEL request is sent. A Reason header is contained in the CANCEL request and the cause value is set to '9' ISUP Parameter values REL: Cause = 9 SIP Parameter values CANCEL: Reason: Q.850; cause=9 Comments Message flows ISUP MGCF Mg A Session is already in early dialogue REL CANCEL RLC 200 OK CANCEL 487 Request Terminated ACK ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 265 TP number TP_314_003 Reference 7.4.17 TSS reference PSTN-SS/MLPP/ Selection criteria PICS 6.3.2/15 Test Purpose name A REL cause #8 terminates an early dialogue Test Purpose Ensure that on receipt of a REL message in an early dialogue at the I-MGCF and the Cause value is set to '8', a 4xx or 5xx final response is sent. A Reason header is contained in the final response message and the cause value is set to '9' ISUP Parameter values REL: Cause = 8 SIP Parameter values 480: Reason: Q.850; cause=8 Comments Message flows Mg MGCF ISUP A Session is already in early dialogue 4xx/5xx REL ACK RLC TP number TP_314_004 Reference 7.4.17 TSS reference PSTN-SS/MLPP/ Selection criteria PICS 6.3.2/15 Test Purpose name A REL cause #9 terminates a confirmed dialogue Test Purpose Ensure that on receipt of a REL message in a confirmed dialogue and the Cause value is set to '9', a BYE request is sent. A Reason header is contained in the BYE request and the cause value is set to '9' ISUP Parameter values REL: Cause = 9 SIP Parameter values BYE: Reason: Q.850; cause=9 Comments Message flows ISUP MGCF Mg A Session is already established REL BYE RLC 200 OK BYE
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.15 Global Virtual Network Service (GVNS)	TP number TP_315_001 Reference 7.4.18 TSS reference PSTN-SS/GVNS/ Selection criteria PICS 6.3.2/16 Test Purpose name Forward GVNS parameter in IAM discarded Test Purpose Ensure that on receipt of an IAM containing a request for GVNS service, the Forward GVNS parameter is discarded without affect the ongoing call setup ISUP Parameter values IAM: Called party number Forward GVNS Originating participating service provider GVNS user group Terminating network routing number SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 266
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.16 Reverse charging (REV)	TP number TP_316_001 Reference 7.4.20 TSS reference PSTN-SS/REV/ Selection criteria PICS 6.3.7/1 AND PICS 6.3.2/17 Test Purpose name REV request from the calling user at the call set-up time Test Purpose Ensure that on receipt of an IAM and a Remote Operation parameter is present containing a REVCallingReqSetup invoke component, the Remote Operation parameter is discarded without affect the ongoing call setup ISUP Parameter values IAM: Called party number Remote Operation REVCallingReqSetup invoke transferRequested = true callingUserNumber SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_316_002 Reference 7.4.20 TSS reference PSTN-SS/REV/ Selection criteria PICS 6.3.7/1 AND PICS 6.3.2/17 Test Purpose name REV request from the calling user during the active state of the call Test Purpose Ensure that on receipt of a FAC message at the O-MGCF in the active state of a call and a Remote Operation parameter is present containing a REVCallingReqActive invoke component, the FAC message is discarded without affect the present call ISUP Parameter values FAC: Remote Operation REVCallingReqActive invoke transferRequested = true callingUserNumber SIP Parameter values Comments Message flows ISUP MGCF Mg A confirmed dialogue is already established FAC Apply post test routine TP number TP_316_003 Reference 7.4.20 TSS reference PSTN-SS/REV/ Selection criteria PICS 6.3.7/1 AND PICS 6.3.2/17 Test Purpose name REV request from the called user during the active state of the call Test Purpose Ensure that on receipt of a FAC message at the I-MGCF in the active state of a call and a Remote Operation parameter is present containing a REVCalledRequest invoke component, the FAC message is discarded without affect the present call ISUP Parameter values FAC: Remote Operation REVCalledRequest invoke transferRequested = true calledUserNumber SIP Parameter values Comments Message flows Mg MGCF ISUP A confirmed dialogue is already established FAC Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 267 TP number TP_316_004 Reference 7.4.20 TSS reference PSTN-SS/REV/ Selection criteria PICS 6.3.7/2 AND PICS 6.3.2/17 Test Purpose name REV request in IAM explicit rejected Test Purpose Ensure that on receipt of an IAM message and a Remote Operation parameter is present containing REVCallingReqSetup invoke component and the explicit rejection of this service is supported, the SUT sends in a: • ANM a Remote Operation parameter containing a REVCallingReqSetup return error component set to rejectedByNetwork OR • REL a Remote Operation parameter containing a REVCallingReqSetup return error component set to rejectedByNetwork and the Cause value is set to '29' ISUP Parameter values IAM: Called party number Remote Operation REVCallingReqSetup invoke transferRequested = true callingUserNumber ANM: Remote Operation REVCallingReqSetup return error rejectedByNetwork REL: Cause 29 Remote Operation REVCallingReqSetup return error rejectedByNetwork SIP Parameter values Comments Message flows ISUP MGCF Mg IAM CASE A INVITE ACM 180 Ringing ANM 200 OK INVITE ACK Apply post test routine CASE B REL RLC TP number TP_316_005 Reference 7.4.20 TSS reference PSTN-SS/REV/ Selection criteria PICS 6.3.7/2 AND PICS 6.3.2/17 Test Purpose name REV request in the active state explicit rejected at the O-MGCF Test Purpose Ensure that on receipt of an FAC message at the O-MGCF in the active state of the call and a Remote Operation parameter is present containing REVCallingReqSetup invoke component and the explicit rejection of this service is supported, the SUT sends in a FRJ message a Remote Operation parameter containing a REVCallingReqActive return error component set to rejectedByNetwork ISUP Parameter values FAC: Remote Operation REVCallingReqActive invoke transferRequested = true callingUserNumber FRJ: Remote Operation REVCallingReqActive return error rejectedByNetwork SIP Parameter values Comments Message flows ISUP MGCF Mg A confirmed dialogue is already established FAC FRJ Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 268 TP number TP_316_006 Reference 7.4.20 TSS reference PSTN-SS/REV/ Selection criteria PICS 6.3.7/2 AND PICS 6.3.2/17 Test Purpose name REV request in the active state explicit rejected at the I-MGCF Test Purpose Ensure that on receipt of an FAC message at the O-MGCF in the active state of the call and a Remote Operation parameter is present containing REVCallingReqSetup invoke component and the explicit rejection of this service is supported, the SUT sends in a FRJ message a Remote Operation parameter containing a REVCalledRequest return error component set to rejectedByNetwork ISUP Parameter values FAC: Remote Operation REVCalledRequest invoke transferRequested = true calledUserNumber FRJ: Remote Operation REVCalledRequest return error rejectedByNetwork SIP Parameter values Comments Message flows Mg MGCF ISUP A confirmed dialogue is already established FAC FRJ Apply post test routine
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.17 User-to-User Signalling (UUS)
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.17.1 User-to-User Signalling (UUS) service 1 (implicit)	TP number TP_317_001 Reference 7.4.21.1.2 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 Test Purpose name User to user information received in an INVITE is sent in an IAM Test Purpose Ensure that on receipt of a User-to-User header field in an initial INVITE request and the 'encoding' parameter is set to 'hex' an ISUP IAM message is sent. A User-to-user parameter is present. The User Information is derived from the uuidata parameter of the SIP User-to-User header field and the ISUP User-to-user Protocol discriminator is set to '04' ISUP Parameter values IAM: User-to-user Information User Information SIP Parameter values INVITE: User-to-User: <uuidata>; encoding=hex Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 269 TP number TP_317_002 Reference 7.4.21.1.2 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 Test Purpose name User to user information received in a Cancel is sent in a REL Test Purpose Ensure that on receipt of a User-to-User header field in a CANCEL request and the 'encoding' parameter is set to 'hex' an ISUP REL message is sent. A User-to-user parameter is present. The User Information is derived from the uuidata parameter of the SIP User-to-User header field and the ISUP User-to-user Protocol discriminator is set to '04' ISUP Parameter values REL: User-to-user Information User Information SIP Parameter values CANCEL: User-to-User: <uuidata>; encoding=hex Comments Message flows Mg MGCF ISUP INVITE IAM CANCEL REL 200 OK CANCEL RLC 487 Request Terminated ACK Apply post test routine TP number TP_317_003 Reference 7.4.21.1.2 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 Test Purpose name User to user information received in a BYE is sent in a REL Test Purpose Ensure that on receipt of a User-to-User header field in a BYE request after a confirmed dialogue was established and the 'encoding' parameter is set to 'hex' an ISUP REL message is sent. A User-to-user parameter is present. The User Information is derived from the uuidata parameter of the SIP User-to-User header field and the ISUP User-to-user Protocol discriminator is set to '04' ISUP Parameter values REL: User-to-user Information User Information SIP Parameter values BYE: User-to-User: <uuidata>; encoding=hex Comments Message flows Mg MGCF ISUP A confirmed dialogue is already established BYE REL 200 OK BYE RLC TP number TP_317_004 Reference 7.4.21.1.3 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 Test Purpose name User to user information received in an IAM is sent in an INVITE Test Purpose Ensure that on receipt of User-to-user parameter contained in an IAM, an INVITE request is sent and the User-to-User header is present. The uuidata parameter is derived from the User Information of the User-to-user parameter of the IAM, the encoding parameter is set to 'hex' ISUP Parameter values IAM: User-to-user Information User Information SIP Parameter values INVITE: User-to-User: <uuidata>; encoding=hex Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 270 TP number TP_317_005 Reference 7.4.21.1.3 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 Test Purpose name User to user information received in a REL is sent in a CANCEL Test Purpose Ensure that on receipt of User-to-user parameter contained in a REL before the dialogue is confirmed, a CANCEL request is sent and the User-to-User header is present. The uuidata parameter is derived from the User Information of the User-to-user parameter of the REL, the encoding parameter is set to 'hex' ISUP Parameter values REL: User-to-user Information User Information SIP Parameter values CANCEL: User-to-User: <uuidata>; encoding=hex Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying REL CANCEL RLC 200 OK CANCEL 487 Request Terminated ACK Apply post test routine TP number TP_317_006 Reference 7.4.21.1.3 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 Test Purpose name User to user information received in a REL is sent in a BYE Test Purpose Ensure that on receipt of User-to-user parameter contained in a REL after the dialogue is confirmed, a BYE request is sent and the User-to-User header is present. The uuidata parameter is derived from the User Information of the User-to-user parameter of the REL, the encoding parameter is set to 'hex' ISUP Parameter values REL: User-to-user Information User Information SIP Parameter values BYE: User-to-User: <uuidata>; encoding=hex Comments Message flows ISUP MGCF Mg A confirmed dialogue is already established REL BYE RLC 200 OK BYE Apply post test routine
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.17.2 User-to-User Signalling (UUS) service 1 (explicit)	TP number TP_317_101 Reference 7.4.21.2 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 AND NOT PICS 6.3.8/1 Test Purpose name User-to-user indicator service 1 'not essential' received in IAM, discarded Test Purpose Ensure that on receipt of an IAM and a User-to-user indicator parameter for the service 1 is present the request is 'not essential' the call setup is not disrupted ISUP Parameter values IAM: User-to-user Indicator Request service 1 not essential User-to-user Information User Information SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ANM 200 OK INVITE ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 271 TP number TP_317_102 Reference 7.4.21.2 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 AND PICS 6.3.8/1 Test Purpose name User-to-user indicator service 1 'not essential' received in IAM, User-to-user indicator response in ACM or ANM 'not provided' Test Purpose Ensure that on receipt of an IAM and a User-to-user indicator parameter for the service 1 is present the request is 'not essential' the call setup is not disrupted A User-to-user indicator is sent in an ACM or ANM with a response for service 1 'not provided' ISUP Parameter values IAM: User-to-user Indicator Request service 1 not essential User-to-user Information User Information ACM or ANM: User-to-user Indicator Response service 1 not Provided SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ANM 200 OK INVITE ACK Apply post test routine TP number TP_317_103 Reference 7.4.21.2 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 AND PICS 6.3.8/1 Test Purpose name User-to-user indicator service 1 'essential' received in IAM, call is rejected Test Purpose Ensure that on receipt of an IAM and a User-to-user indicator parameter for the service 1 is present the request is 'essential' the call setup is rejected. A REL is sent the Cause value is set to '29 ' the Diagnostics field contains the parameter name of the User-to-user indicator '42' ISUP Parameter values IAM: User-to-user Indicator Request service 1 essential User-to-user Information User Information REL: Cause indicator Cause 29 Diagnostics 42 SIP Parameter values Comments Message flows ISUP MGCF Mg IAM REL RLC ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 272
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.17.3 User-to-User Signalling (UUS) service 2	TP number TP_317_201 Reference 7.4.21.2 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 AND NOT PICS 6.3.8/1 Test Purpose name User-to-user indicator service 2 'not essential' received in IAM, discarded Test Purpose Ensure that on receipt of an IAM and a User-to-user indicator parameter for the service 2 is present the request is 'not essential' the call setup is not disrupted ISUP Parameter values IAM: User-to-user Indicator Request service 2 not essential User-to-user Information User Information SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_317_202 Reference 7.4.21.2 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 AND PICS 6.3.8/1 Test Purpose name User-to-user indicator service 2 'not essential' received in IAM, User-to-user indicator response in ACM or ANM 'not provided' Test Purpose Ensure that on receipt of an IAM and a User-to-user indicator parameter for the service 2 is present the request is 'not essential', the call setup is not disrupted A User-to-user indicator is sent in an ACM or ANM with a response for service 2 'not provided' ISUP Parameter values IAM: User-to-user Indicator Request service 2 not essential User-to-user Information User Information ACM or ANM: User-to-user Indicator Response service 2 not Provided SIP Parameter values Comments Message flows Mg MGCF ISUP IAM INVITE ACM 180 Ringing ANM 200 OK INVITE ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 273 TP number TP_317_203 Reference 7.4.21.2 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 AND PICS 6.3.8/1 Test Purpose name User-to-user indicator service 2 'essential' received in IAM, call is rejected Test Purpose Ensure that on receipt of an IAM and a User-to-user indicator parameter for the service 2 is present the request is 'essential', the call setup is rejected. A REL is sent the Cause value is set to '29' the Diagnostics field contains the parameter name of the User-to-user indicator '42' ISUP Parameter values IAM: User-to-user Indicator Request service 2 essential User-to-user Information User Information REL: Cause indicator Cause 29 Diagnostics 42 SIP Parameter values Comments Message flows ISUP MGCF Mg IAM REL RLC
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.17.4 User-to-User Signalling (UUS) service 3	TP number TP_317_301 Reference 7.4.21.2 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 AND NOT PICS 6.3.8/1 Test Purpose name User-to-user indicator service 3 'not essential' received in IAM, discarded Test Purpose Ensure that on receipt of an IAM and a User-to-user indicator parameter for the service 3 is present the request is 'not essential' the call setup is not disrupted ISUP Parameter values IAM: User-to-user Indicator Request service 3 not essential User-to-user Information User Information SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 274 TP number TP_317_302 Reference 7.4.21.2 TSS reference PSTN-SS/UUS/ Selection criteria AND PICS 6.3.2/18 AND PICS 6.3.8/1 Test Purpose name User-to-user indicator service 3 'not essential' received in IAM, User-to-user indicator response in ACM or ANM 'not provided' Test Purpose Ensure that on receipt of an IAM and a User-to-user indicator parameter for the service 3 is present the request is 'not essential', the call setup is not disrupted A User-to-user indicator is sent in an ACM or ANM with a response for service 3 'not provided' ISUP Parameter values IAM: User-to-user Indicator Request service 3 not essential User-to-user Information User Information ACM or ANM: User-to-user Indicator Response service 3 not Provided SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ANM 200 OK INVITE ACK Apply post test routine TP number TP_317_303 Reference 7.4.21.2 TSS reference PSTN-SS/UUS/ Selection criteria PICS 6.3.2/18 AND PICS 6.3.8/1 Test Purpose name User-to-user indicator service 3 'essential' received in IAM, call is rejected Test Purpose Ensure that on receipt of an IAM and a User-to-user indicator parameter for the service 3 is present the request is 'essential', the call setup is rejected. A REL is sent the Cause value is set to '29' the Diagnostics field contains the parameter name of the User-to-user indicator '42' ISUP Parameter values IAM: User-to-user Indicator Request service 3 essential User-to-user Information User Information REL: Cause indicator Cause 29 Diagnostics 42 SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing ANM 200 OK INVITE ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 275
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.2.18 Anonymous Call rejection	TP number TP_318_001 Reference 7.4.23 TSS reference PSTN-SS/ACR/ Selection criteria Test Purpose name Receipt of REL cause 24 Test Purpose Ensure that on receipt of an ISUP REL message cause #24 after the IAM was sent, a 433 (Anonymity Disallowed) final response is sent ISUP Parameter values REL: Cause=24 (call rejected due to ACR supplementary service) SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 433 (Anonymity Disallowed) REL ACK RLC Apply post test routine TP number TP_318_002 Reference 7.4.23 TSS reference PSTN-SS/ACR/ Selection criteria Test Purpose name Receipt of 433 Test Purpose Ensure that on receipt of a 433 (Anonymity Disallowed) final response after an initial INVITE request was sent, an ISUP REL cause #24 is sent ISUP Parameter values REL: Cause=24 (call rejected due to ACR supplementary service) SIP Parameter values Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying REL 433 (Anonymity Disallowed) RLC ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 276
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.3 IMS Supplementary Services	6.3.1 Originating Identification Presentation (OIP) and Originating Identification Restriction (OIR) TP number TP_401_001 Reference 7.5.1 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name INVITE received. From header not present, P-Asserted-Identity not present. Network provided number is sent Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is not present and the From header does not contain an URI that encodes an E.164 Address, an IAM is sent. An Calling party number parameter is present and the address digits are provided by the SUT ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=restricted or allowed Address signal provided by the Network if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" SIP Parameter values INVITE: P-Asserted-Identity: not present From: does not contain a URI that encodes an E.164 address Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 277 TP number TP_401_002 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.3/4 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header not present, P-Asserted-Identity not present. Network provided number is sent Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is not present and the From header does not contain an URI that encodes an E.164 Address, an IAM is sent. A Calling party number parameter is present and the address digits are provided by the SUT. The Presentation restriction indicator is set to 'presentation restricted by network' ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=presentation restricted by network Address signal provided by the Network if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" SIP Parameter values INVITE: P-Asserted-Identity: not present From: does not contain a URI that encodes an E.164 address Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_401_003 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.3/2 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header not present, P-Asserted-Identity not present. Address digits omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is not present and the From header does not contain an URI that encodes an E.164 Address, an IAM is sent. A Calling party number parameter is present and the address digits omitted ISUP Parameter values IAM: Calling party Number not present SIP Parameter values INVITE: P-Asserted-Identity: not present From: does not contain a URI that encodes an E.164 address Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 278 TP number TP_401_004 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.3/2 AND PICS 6.3.3/3 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header not present, P-Asserted-Identity not present APRI is set to 'Address not available' Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is not present and the From header does not contain an URI that encodes an E.164 Address, an IAM is sent. A Calling party number parameter is present and the address digits omitted. The Presentation restriction indicator is set to 'Address not available' ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator='000' Nature of Address Indicator='0000000' Screening indicator=Network Provided Presentation restriction=Address not available Address signal Address digits not present SIP Parameter values INVITE: P-Asserted-Identity: not present From: does not contain a URI that encodes an E.164 address Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 279 TP number TP_401_005 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.3/1 PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity not present. Network provided number is sent Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is not present and the From header contains an URI that encodes an E.164 Address, an IAM is sent. A Calling party number parameter is present and the address digits are provided by the SUT. An Additional calling Party number is sent in a Generic number parameter and the Address signals are derived from the Userpart of the From header ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=restricted or allowed Address signal provided by the Network if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" Additional calling party number Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Presentation restriction=restricted or allowed Screening indicator=user provided not verified Address digits derived from the 'From' header if NOA is national (significant) number then set to "NDC" + "SN" If NOA is "international number" set to "CC"+' NDC'+'SN' SIP Parameter values INVITE: P-Asserted-Identity: not present From: contains a URI that encodes an E.164 address Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 280 TP number TP_401_006 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.3/1 AND PICS 6.3.3/4 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity not present. Network provided number is sent Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is not present and the From header contains an URI that encodes an E.164 Address, an IAM is sent. A Calling party number parameter is present and the address digits are provided by the SUT. The Presentation restriction indicator is set to 'presentation restricted by network'. An Additional calling Party number is sent in a Generic number parameter and the Address signals are derived from the Userpart of the From header and the Presentation restriction indicator is set to 'presentation allowed' ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=presentation restricted by network Address signal provided by the Network if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" Additional calling party number Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Presentation restriction=allowed Screening indicator=user provided not verified Address digits derived from the 'From' header if NOA is national (significant) number then set to "NDC" + "SN" If NOA is "international number" set to "CC"+' NDC'+'SN' SIP Parameter values INVITE: P-Asserted-Identity: not present From: contains a URI that encodes an E.164 address Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 281 TP number TP_401_007 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.3/2 AND NOT PICS 6.3.3/5 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity not present. Address digits omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is not present and the From header contains an URI that encodes an E.164 Address, an IAM is sent. A Calling party number parameter is present and the address digits omitted. An Additional calling Party number is sent in a Generic number parameter and the Address signals are derived from the Userpart of the From header ISUP Parameter values IAM: Calling party Number not present Additional calling party number Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Presentation restriction=restricted or allowed Screening indicator=user provided not verified Address digits derived from the 'From' header if NOA is national (significant) number then set to "NDC" + "SN" If NOA is "international number" set to "CC"+' NDC'+'SN' SIP Parameter values INVITE: P-Asserted-Identity: not present From: contains a URI that encodes an E.164 address Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_401_008 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.3/2 AND PICS 6.3.3/5 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity not present. Address digits omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is not present and the From header contains an URI that encodes an E.164 Address, an IAM is sent. A Calling party number parameter is present and the address digits omitted. In addition, the Additional calling party number is omitted. ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator='000' Nature of Address Indicator='0000000' Screening indicator=Network Provided Presentation restriction= Address not available Address signal Address digits not present Additional calling party number not present SIP Parameter values INVITE: P-Asserted-Identity: not present From: contains a URI that encodes an E.164 address Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 282 TP number TP_401_009 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name INVITE received. From header not present, P-Asserted-Identity present Privacy not present Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header does not contain an URI that encodes an E.164 Address a Privacy header is not present, an IAM is sent. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=allowed Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" SIP Parameter values INVITE: P-Asserted-Identity: present From: does not contain a URI that encodes an E.164 address Privacy not present Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_401_010 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name INVITE received. From header not present, P-Asserted-Identity present, Privacy value 'none' Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header does not contain an URI that encodes an E.164 Address and a Privacy header is present set to 'none', an IAM is sent. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header. The Presentation restriction is set to 'presentation 'allowed' ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=allowed Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" SIP Parameter values INVITE: P-Asserted-Identity: present From: does not contain a URI that encodes an E.164 address Privacy: none Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 283 TP number TP_401_011 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name INVITE received. From header not present, P-Asserted-Identity present, Privacy value 'id' Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header does not contain an URI that encodes an E.164 Address and a Privacy header is present set to 'id', an IAM is sent. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header. The Presentation restriction is set to 'presentation 'restricted' ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=restricted Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" SIP Parameter values INVITE: P-Asserted-Identity: present From: does not contain a URI that encodes an E.164 address Privacy: id Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_401_012 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name INVITE received. From header not present, P-Asserted-Identity present, Privacy value 'user' Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header does not contain an URI that encodes an E.164 Address and a Privacy header is present set to 'user', an IAM is sent. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header. The Presentation restriction is set to 'presentation 'restricted' ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=restricted Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" SIP Parameter values INVITE: P-Asserted-Identity: present From: does not contain a URI that encodes an E.164 address Privacy: user Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 284 TP number TP_401_013 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name INVITE received. From header not present, P-Asserted-Identity present, Privacy value 'header' Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header does not contain an URI that encodes an E.164 Address and a Privacy header is present set to 'header', an IAM is sent. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header. The Presentation restriction is set to 'presentation 'restricted' ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=restricted Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" SIP Parameter values INVITE: P-Asserted-Identity: present From: does not contain a URI that encodes an E.164 address Privacy: header Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 285 TP number TP_401_014 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria NOT PICS 6.3.3/6 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity present. Privacy header not present, additional calling party number not omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header contains an URI that encodes an E.164 Address a Privacy header is not present, an IAM is sent. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header the Presentation restriction indicator is set to 'presentation allowed'. An Additional calling Party number is sent in a Generic number parameter and the Address signals are derived from the Userpart of the From header the Presentation restriction indicator is set to 'presentation allowed'. ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=allowed Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" Additional calling party number Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Presentation restriction=allowed Screening indicator=user provided not verified Address digits derived from the 'From' header if NOA is national (significant) number then set to "NDC" + "SN" If NOA is "international number" set to "CC"+' NDC'+'SN' SIP Parameter values INVITE: P-Asserted-Identity: present From: contains a URI that encodes an E.164 address Privacy not present Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 286 TP number TP_401_015 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria NOT PICS 6.3.3/6 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity present. Privacy header 'none', additional calling party number not omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header contains an URI that encodes an E.164 Address, an IAM is sent Privacy header is present set to 'none'. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header the Presentation restriction indicator is set to 'presentation allowed'. An Additional calling Party number is sent in a Generic number parameter and the Address signals are derived from the Userpart of the From header the Presentation restriction indicator is set to 'presentation allowed'. ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=allowed Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" Additional calling party number Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Presentation restriction=allowed Screening indicator=user provided not verified Address digits derived from the 'From' header if NOA is national (significant) number then set to "NDC" + "SN" If NOA is "international number" set to "CC"+' NDC'+'SN' SIP Parameter values INVITE: P-Asserted-Identity: present From: contains a URI that encodes an E.164 address Privacy: none Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 287 TP number TP_401_016 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria NOT PICS 6.3.3/6 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity present. Privacy header 'id', additional calling party number not omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header contains an URI that encodes an E.164 Address, an IAM is sent Privacy header is present set to 'id'. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header the Presentation restriction indicator is set to 'presentation restricted'. An Additional calling Party number is sent in a Generic number parameter and the Address signals are derived from the Userpart of the From header the Presentation restriction indicator is set to 'presentation restricted'. ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=restricted Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" Additional calling party number Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Presentation restriction=restricted Screening indicator=user provided not verified Address digits derived from the 'From' header if NOA is national (significant) number then set to "NDC" + "SN" If NOA is "international number" set to "CC"+' NDC'+'SN' SIP Parameter values INVITE: P-Asserted-Identity: present From: contains a URI that encodes an E.164 address Privacy: id Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 288 TP number TP_401_017 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria NOT PICS 6.3.3/6 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity present. Privacy header 'user', additional calling party number not omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header contains an URI that encodes an E.164 Address, an IAM is sent Privacy header is present set to 'user'. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header the Presentation restriction indicator is set to 'presentation restricted'. An Additional calling Party number is sent in a Generic number parameter and the Address signals are derived from the Userpart of the From header the Presentation restriction indicator is set to 'presentation restricted' ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=restricted Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" Additional calling party number Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Presentation restriction=restricted Screening indicator=user provided not verified Address digits derived from the 'From' header if NOA is national (significant) number then set to "NDC" + "SN" If NOA is "international number" set to "CC"+' NDC'+'SN' SIP Parameter values INVITE: P-Asserted-Identity: present From: contains a URI that encodes an E.164 address Privacy: user Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 289 TP number TP_401_018 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria NOT PICS 6.3.3/6 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity present. Privacy header 'header', additional calling party number not omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header contains an URI that encodes an E.164 Address, an IAM is sent Privacy header is present set to 'header'. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header the Presentation restriction indicator is set to 'presentation restricted'. An Additional calling Party number is sent in a Generic number parameter and the Address signals are derived from the Userpart of the From header the Presentation restriction indicator is set to 'presentation restricted' ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=restricted Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" Additional calling party number Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Presentation restriction=restricted Screening indicator=user provided not verified Address digits derived from the 'From' header if NOA is national (significant) number then set to "NDC" + "SN" If NOA is "international number" set to "CC"+' NDC'+'SN' SIP Parameter values INVITE: P-Asserted-Identity: present From: contains a URI that encodes an E.164 address Privacy: header Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 290 TP number TP_401_019 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.3/6 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity present. Privacy header not present, additional calling party number omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header contains an URI that encodes an E.164 Address a Privacy header is not present, an IAM is sent. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header the Presentation restriction indicator is set to 'presentation allowed'. An Additional calling Party number parameter is not present ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=allowed Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" SIP Parameter values INVITE: P-Asserted-Identity: present From: contains a URI that encodes an E.164 address Privacy not present Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 291 TP number TP_401_020 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.3/6 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity present. Privacy header 'none', additional calling party number omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header contains an URI that encodes an E.164 Address a Privacy header is set to 'none', an IAM is sent. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header the Presentation restriction indicator is set to 'presentation allowed'. An Additional calling Party number parameter is not present ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=allowed Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" SIP Parameter values INVITE: P-Asserted-Identity: present From: contains a URI that encodes an E.164 address Privacy: none Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 292 TP number TP_401_021 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.3/6 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity present. Privacy header 'id', additional calling party number omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header contains an URI that encodes an E.164 Address a Privacy header is set to 'id', an IAM is sent. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header the Presentation restriction indicator is set to 'presentation restricted'. An Additional calling Party number parameter is not present ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=restricted Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" SIP Parameter values INVITE: P-Asserted-Identity: present From: contains a URI that encodes an E.164 address Privacy: id Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 293 TP number TP_401_022 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.3/6 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity present. Privacy header 'user', additional calling party number omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header contains an URI that encodes an E.164 Address a Privacy header is set to 'user', an IAM is sent. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header the Presentation restriction indicator is set to 'presentation restricted'. An Additional calling Party number parameter is not present ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=restricted Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" SIP Parameter values INVITE: P-Asserted-Identity: present From: contains a URI that encodes an E.164 address Privacy: user Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 294 TP number TP_401_023 Reference 7.5.1, 7.2.3.1.2.6 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.3/6 AND PICS 6.3.2/1 Test Purpose name INVITE received. From header present, P-Asserted-Identity present. Privacy header 'header', additional calling party number omitted Test Purpose Ensure that on receipt of an INVITE request the P-Asserted-Identity is present and the From header contains an URI that encodes an E.164 Address a Privacy header is set to 'header', an IAM is sent. A Calling party number parameter is present and the address digits are derived from the P-Asserted-Identity header the Presentation restriction indicator is set to 'presentation restricted'. An Additional calling Party number parameter is not present ISUP Parameter values IAM: Calling party Number Number incomplete indicator=Complete Numbering Plan Indicator=ISDN/Telephony (Recommendation E.164 [i.1]) Nature of Address Indicator If CC encoded in the URI is equal to the CC of the country where MGCF is located AND the next BICC/ISUP node is located in the same country then national (significant) number else international number Screening indicator=Network Provided Presentation restriction=restricted Address signal derived from the P-Asserted-Identity if NOA is "national (significant) number" then set to "NDC" + "SN" If NOA is 'international number" then set to "CC"+" NDC"+"SN" SIP Parameter values INVITE: P-Asserted-Identity: present From: contains a URI that encodes an E.164 address Privacy: header Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_401_024 Reference 7.5.1, 7.2.3.2.2.3 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name Calling party number not received, Additional calling party number not received, unavailable From header is sent Test Purpose Ensure that on receipt of an IAM and no Calling party number and no Additional calling party number is present, an INVITE is sent. A P-Asserted-Identity is not present and the URI of the From header is set to 'sip:unavailable@unknown.invalid' ISUP Parameter values IAM: Calling party number not present Generic number (Additional calling party number) not present SIP Parameter values INVITE: From: sip:unavailable@unknown.invalid P-Asserted-Identity not present Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 295 TP number TP_401_025 Reference 7.5.1, 7.2.3.2.2.3 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name Calling party number not received, Additional calling party number received presentation allowed, From header containing a E.164 URI is sent Test Purpose Ensure that on receipt of an IAM and no Calling party number is present and an Additional calling party number is present, an INVITE is sent. A P-Asserted-Identity is not present and the URI of the From header is derived from the additional calling party number or is network provided ISUP Parameter values IAM: Calling party number not present Generic number (Additional calling party number) present presentation allowed SIP Parameter values INVITE: From: derived from the additional calling party number or network provided P-Asserted-Identity not present Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_401_026 Reference 7.5.1, 7.2.3.2.2.3 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name Calling party number not received, Additional calling party number received presentation restricted, unavailable From header is sent Test Purpose Ensure that on receipt of an IAM and no Calling party number and an Additional calling party number is present the Presentation restriction indicator is set to 'presentation restricted', an INVITE is sent. A P-Asserted-Identity is not present and the URI of the From header is set to 'sip:unavailable@unknown.invalid' ISUP Parameter values IAM: Calling party number not present Generic number (Additional calling party number) present presentation restricted SIP Parameter values INVITE: From: sip:unavailable@unknown.invalid P-Asserted-Identity not present Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_401_027 Reference 7.5.1, 7.2.3.2.2.3 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name Calling party number received presentation allowed, Additional calling party number not received, P-Asserted-Identity header and From header are sent Test Purpose Ensure that on receipt of an IAM and a Calling party number Presentation restriction indicator is set to 'presentation allowed' and an Additional calling party number is not present, an INVITE is sent. A P-Asserted-Identity is present the URI is derived from the address signals of the calling party number and the URI of the From header is derived from the address signals of the calling party number. A Privacy header is not present or if present the value is not equal to 'id' ISUP Parameter values IAM: Calling party number present presentation allowed Generic number (Additional calling party number) not present SIP Parameter values INVITE: From derived from the calling party number P-Asserted-Identity derived from the calling party number Privacy not 'id' or Privacy header not present Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 296 TP number TP_401_028 Reference 7.5.1, 7.2.3.2.2.3 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name Calling party number received presentation allowed, Additional calling party number received presentation allowed, P-Asserted-Identity header and From header are sent Test Purpose Ensure that on receipt of an IAM and a Calling party number Presentation restriction indicator is set to 'presentation allowed' and an Additional calling party number is present the Presentation restriction indicator is set to 'presentation allowed', an INVITE is sent. A P-Asserted-Identity is present the URI is derived from the address signals of the calling party number and the URI of the From header is derived from the address signals of the additional calling party number. A Privacy header is not present or if present the value is not equal to 'id' ISUP Parameter values IAM: Calling party number present presentation allowed Generic number (Additional calling party number) present presentation allowed SIP Parameter values INVITE: From derived from the additional calling party number P-Asserted-Identity derived from the calling party number Privacy not 'id' or Privacy header not present Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_401_029 Reference 7.5.1, 7.2.3.2.2.3 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name Calling party number received presentation allowed, Additional calling party number received presentation restricted, P-Asserted-Identity header and From header are sent Test Purpose Ensure that on receipt of an IAM and a Calling party number Presentation restriction indicator is set to 'presentation allowed' and an Additional calling party number is present the Presentation restriction indicator is set to 'presentation restricted', an INVITE is sent. A P-Asserted-Identity is present the URI is derived from the address signals of the calling party number and the URI of the From header is derived from the address signals of the calling party number. A Privacy header is not present or if present the value is not equal to 'id' ISUP Parameter values IAM: Calling party number present presentation allowed Generic number (Additional calling party number) present presentation restricted SIP Parameter values INVITE: From derived from the calling party number P-Asserted-Identity derived from the calling party number Privacy not 'id' or Privacy header not present Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 297 TP number TP_401_030 Reference 7.5.1, 7.2.3.2.2.3 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name Calling party number received presentation restricted, Additional calling party number not received, P-Asserted-Identity header and From header are sent Test Purpose Ensure that on receipt of an IAM and a Calling party number Presentation restriction indicator is set to 'presentation restricted' and an Additional calling party number is not present, an INVITE is sent. A P-Asserted-Identity is present the URI is derived from the address signals of the calling party number and the URI of the From header is ser to 'sip:anonymous@anonymous.invalid'. A Privacy header is present the value is equal to 'id' ISUP Parameter values IAM: Calling party number present presentation restricted Generic number (Additional calling party number) not present SIP Parameter values INVITE: From: sip:anonymous@anonymous.invalid P-Asserted-Identity derived from the calling party number Privacy: 'id' Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_401_031 Reference 7.5.1, 7.2.3.2.2.3 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name Calling party number received presentation restricted, Additional calling party number received presentation allowed, P-Asserted-Identity header and From header are sent Test Purpose Ensure that on receipt of an IAM and a Calling party number Presentation restriction indicator is set to 'presentation restricted' and an Additional calling party number is present the Presentation restriction indicator is set to 'presentation allowed', an INVITE is sent. A P-Asserted-Identity is present the URI is derived from the address signals of the calling party number and the URI of the From header is derived from the address signals of the additional calling party number. A Privacy header is present the value is equal to 'id' ISUP Parameter values IAM: Calling party number present presentation restricted Generic number (Additional calling party number) present presentation allowed SIP Parameter values INVITE: From derived from the additional calling party number P-Asserted-Identity derived from the calling party number Privacy: 'id' Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_401_032 Reference 7.5.1, 7.2.3.2.2.3 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name Calling party number received presentation restricted, Additional calling party number received presentation restricted, P-Asserted-Identity header and From header are sent Test Purpose Ensure that on receipt of an IAM and a Calling party number Presentation restriction indicator is set to 'presentation restricted' and an Additional calling party number is present the Presentation restriction indicator is set to 'presentation restricted', an INVITE is sent. A P-Asserted-Identity is present the URI is derived from the address signals of the calling party number and the URI of the From header is set to the value 'sip:anonymous@anonymous.invalid'. A Privacy header is present the value is equal to 'id' ISUP Parameter values IAM: Calling party number present presentation restricted Generic number (Additional calling party number) present presentation restricted SIP Parameter values INVITE: From: sip:anonymous@anonymous.invalid P-Asserted-Identity derived from the calling party number Privacy: 'id' Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 298 TP number TP_401_033 Reference 7.5.1, 7.2.3.2.2.3 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name Calling party number received presentation restricted by the network, Additional calling party number not received, From header is sent Test Purpose Ensure that on receipt of an IAM and a Calling party number Presentation restriction indicator is set to 'presentation restricted by the network' and an Additional calling party number is not present, an INVITE is sent. A P-Asserted-Identity is not present and the URI of the From header is set to the value 'sip: unavailable @hostportion'. A Privacy header is not present or if present the value is not equal to 'id' ISUP Parameter values IAM: Calling party number present presentation restricted by the network Generic number (Additional calling party number) not present SIP Parameter values INVITE: From: sip:unavailable@hostportion P-Asserted-Identity not present Privacy not 'id' or Privacy header not present Comments The 'hostportion' is implementation dependent Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_401_034 Reference 7.5.1, 7.2.3.2.2.3 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name Calling party number received presentation restricted by the network, Additional calling party number received presentation allowed, From header is sent Test Purpose Ensure that on receipt of an IAM and a Calling party number Presentation restriction indicator is set to 'presentation restricted by the network' and an Additional calling party number is present the Presentation restriction indicator is set to 'presentation allowed', an INVITE is sent. A P-Asserted-Identity is not present and the URI of the From header is derived from the address signals of the additional calling party number. A Privacy header is not present or if present the value is not equal to 'id' ISUP Parameter values IAM: Calling party number present presentation restricted by the network Generic number (Additional calling party number) present presentation allowed SIP Parameter values INVITE: From: derived from the additional calling party number P-Asserted-Identity not present Privacy not 'id' or Privacy header not present Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine TP number TP_401_035 Reference 7.5.1, 7.2.3.2.2.3 TSS reference IMS-SS/OIP-OIR/ Selection criteria PICS 6.3.2/1 Test Purpose name Calling party number received presentation restricted by the network, Additional calling party number received presentation restricted, From header is sent Test Purpose Ensure that on receipt of an IAM and a Calling party number Presentation restriction indicator is set to 'presentation restricted by the network' and an Additional calling party number is present the Presentation restriction indicator is set to 'presentation restricted', an INVITE is sent. A P-Asserted-Identity is not present and the URI of the From header is set to the value 'sip: unavailable@hostportion'. A Privacy header is not present or if present the value is not equal to 'id' ISUP Parameter values IAM: Calling party number present presentation restricted by the network Generic number (Additional calling party number) present presentation restricted SIP Parameter values INVITE: From: sip: unavailable@hostportion P-Asserted-Identity not present Privacy not 'id' or Privacy header not present Comments The 'hostportion' is implementation dependent Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 299 6.3.2 Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) TP number TP_402_001 Reference 7.5.2 TSS reference IMS-SS/TIP-TIR/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/2 Test Purpose name INVITE is sent the supported header contains the option tag 'from-change' Test Purpose Ensure that on receipt of an IAM and the Connected Line Identity Request indicator in the Optional Forward Call Indicators parameter is set to 'requested', an INVITE is sent and the Supported header contains the option tag 'from-change' ISUP Parameter values IAM: Optional Forward Call Indicators Connected Line Identity Request = requested SIP Parameter values INVITE: Supported: from-change Comments Message flows Mg MGCF ISUP IAM INVITE 100 Trying Apply post test routine TP number TP_402_002 Reference 7.5.2 TSS reference IMS-SS/TIP-TIR/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/2 Test Purpose name 'from-change' tag not included in a received provisional response Test Purpose Ensure that on receipt of a provisional response and the 'from-change' tag is not included the ANM is sent as soon as the 200 OK (INVITE) is received ISUP Parameter values IAM: Optional Forward Call Indicators Connected Line Identity Request = requested SIP Parameter values INVITE: Supported: from-change 180: from-change tag not included in the Supported header Comments Message flows Mg MGCF ISUP IAM INVITE ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine TP number TP_402_003 Reference 7.5.2 TSS reference IMS-SS/TIP-TIR/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/2 Test Purpose name 'from-change' tag not included in a received final response Test Purpose Ensure that on receipt of a final successful response and the 'from-change' tag is not included the ANM is sent ISUP Parameter values IAM: Optional Forward Call Indicators Connected Line Identity Request = requested SIP Parameter values INVITE: Supported: from-change 200: from-change tag not included in the Supported header Comments Message flows Mg MGCF ISUP IAM INVITE ACM 180 Ringing ANM 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 300 TP number TP_402_004 Reference 7.5.2 TSS reference IMS-SS/TIP-TIR/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/2 Test Purpose name 'from-change' tag included in a received provisional response Test Purpose Ensure that on receipt of a provisional response and the 'from-change' tag is included the timer TTIR1 is started. The ANM is sent as soon as the UPDATE request is received and a Generic number with a Number qualifier indicator set to 'additional connected number' is present. The additional connected number is coded as follows: Nature of Address Indicator If CC is equal to the country code of the country where SUT is located AND the next ISUP node is located in the same country, then set to "national (significant) number" else set to "international number" Number Incomplete Indicator = complete Numbering Plan Indicator = ISDN (Telephony) numbering plan (Recommendation E.164 [i.1]) Address Presentation Restricted Indicator = Privacy_VA as indicate in table 6.3.2-1 Screening Indicator = user provided, not verified Address Signals If NOA is "national (significant) number" then set to NDC + SN. If NOA is "international number" then set to CC + NDC + SN In addition a Connected number is present the address signal are derived from the P-Asserted-Identity in UPDATE request ISUP Parameter values IAM: Optional Forward Call Indicators Connected Line Identity Request = requested ANM: Connected number Generic number - additional connected number SIP Parameter values INVITE: Supported: from-change 180: from-change tag included in the Supported header Comments Message flows Mg MGCF ISUP IAM INVITE ACM 180 Ringing TTIR1 started 200 OK (INVITE) ACK ANM UPDATE 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 301 TP number TP_402_005 Reference 7.5.2 TSS reference IMS-SS/TIP-TIR/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/2 Test Purpose name 'from-change' tag included in a received final response Test Purpose Ensure that on receipt of a final successful response and the 'from-change' tag is included the timer TTIR1 is started. The ANM is sent as soon as the UPDATE request is received and a Generic number with a Number qualifier indicator set to 'additional connected number' is present. The additional connected number is coded as follows: Nature of Address Indicator If CC is equal to the country code of the country where SUT is located AND the next ISUP node is located in the same country, then set to "national (significant) number" else set to "international number" Number Incomplete Indicator = complete Numbering Plan Indicator = ISDN (Telephony) numbering plan (Recommendation E.164 [i.1]) Address Presentation Restricted Indicator = Privacy_VA as indicate in table 6.3.2-1 Screening Indicator = user provided, not verified Address Signals If NOA is "national (significant) number" then set to NDC + SN. If NOA is "international number" then set to CC + NDC + SN In addition a Connected number is present the address signal are derived from the P-Asserted-Identity in UPDATE request ISUP Parameter values IAM: Optional Forward Call Indicators Connected Line Identity Request = requested ANM: Connected number Generic number - additional connected number SIP Parameter values INVITE: Supported: from-change 200: from-change tag included in the Supported header Comments Message flows Mg MGCF ISUP IAM INVITE ACM 180 Ringing TTIR1 started 200 OK (INVITE) ACK ANM UPDATE 200 OK (UPDATE) Apply post test routine Table 6.3.2-1: Mapping of Privacy value into Address presentation restriction indicator Privacy_VA Privacy value Address Presentation Restricted Indicator Privacy_VA_01 Header Presentation restricted Privacy_VA_02 User Presentation restricted Privacy_VA_03 None Presentation allowed Privacy_VA_04 Id Presentation restricted Privacy_VA_05 Privacy header not present Presentation allowed ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 302 TP number TP_402_006 Reference 7.5.2 TSS reference IMS-SS/TIP-TIR/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/2 Test Purpose name Timer TTIR1 expires Test Purpose Ensure that on receipt of a 200 OK (INVITE) and the 'from-change' tag is present in the Supported header the timer TTIR1 is started. After expiry of TTIR1 the ANM is sent ISUP Parameter values IAM: Optional Forward Call Indicators Connected Line Identity Request = requested ANM: Connected number SIP Parameter values INVITE: Supported: from-change 200: from-change tag included in the Supported header Comments Message flows Mg MGCF ISUP IAM INVITE ACM 180 Ringing TTIR1 started 200 OK (INVITE) ACK ANM TTIR1 expired Apply post test routine TP number TP_402_007 Reference 7.5.2 TSS reference IMS-SS/TIP-TIR/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/2 Test Purpose name Interworking of SIP Supported header into Optional forward call indicator Test Purpose Ensure that on receipt of an INVITE request and the Supported header contains the 'from- change' tag, an IAM is sent. The Connected Line Identity Request indicator in the Optional Forward Call Indicators parameter is set to 'requested' ISUP Parameter values IAM: Optional Forward Call Indicators Connected Line Identity Request = requested SIP Parameter values INVITE: Supported: from-change Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 303 TP number TP_402_008 Reference 7.5.2 TSS reference IMS-SS/TIP-TIR/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/2 Test Purpose name Mapping of Additional connected number presentation allowed into the From header in an UPDATE request. Test Purpose Ensure that on receipt of an ANM and a Generic number additional connected number is present, a 200 OK (INVITE) is sent and the P-Asserted-Identity copied from the P-Called-Party-ID header and the 'from-change' tag in the Supported header is present. The 200 OK (INVITE) is followed by an UPDATE request, containing the 'additional connected number' received in the ANM copied into the From header as described below Generic number Nature of Address Indicator "national (significant) number" Add "+" CC (of the country where the IWU is located) to Generic Number Address Signals then map to user portion of URI scheme used "international number" Map complete Generic Number Address Signals used prefixed with a "+" to user portion of URI scheme used Address Presentation restriction indicator presentation allowed then no Privacy header present or not "header" or not "user" Address Signals: "+" CC NDC SN mapped to user portion of URI scheme used The P-Asserted-Identity is derived from the Connected number as follows Connected number Nature of Address Indicator "national (significant) number" Add "+" CC (of the country where the IWU is located) to Connected Number Address Signals then map to user portion of URI scheme used "international number" Map complete Connected Number Address Signals used prefixed with a "+" to user portion of URI scheme used Address Presentation restriction indicator presentation allowed then no Privacy header present or not "header" or not "user" Address Signals: "+" CC NDC SN mapped to user portion of URI scheme used ISUP Parameter values IAM: Optional forward call indicator Connected Line Identity Request = requested ANM: Generic number additional connected number Address Presentation restriction indicator = presentation allowed SIP Parameter values INVITE: Supported: from-change 200 OK: P-Asserted-Identity Supported: from-change UPDATE: From: <derived from the additional connected number> Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 200 OK (INVITE) ANM UPDATE 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 304 TP number TP_402_009 Reference 7.5.2 TSS reference IMS-SS/TIP-TIR/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/2 Test Purpose name Mapping of Additional connected number presentation restricted into the From header in an UPDATE request Test Purpose Ensure that on receipt of an ANM and a Generic number additional connected number is present, a 200 OK (INVITE) is sent and the P-Asserted-Identity copied from the P-Called-Party-ID header and the 'from-change' tag in the Supported header is present. The 200 OK (INVITE) is followed by an UPDATE request, containing the 'additional connected number' received in the ANM copied into the From header as described below Generic number Nature of Address Indicator "national (significant) number" Add "+" CC (of the country where the IWU is located) to Generic Number Address Signals then map to user portion of URI scheme used "international number" Map complete Generic Number Address Signals used prefixed with a "+" to user portion of URI scheme used Address Presentation restriction indicator presentation restricted then Privacy: header Address Signals: "+" CC NDC SN mapped to user portion of URI scheme used The P-Asserted-Identity is derived from the Connected number as follows Connected number Nature of Address Indicator "national (significant) number" Add "+" CC (of the country where the IWU is located) to Connected Number Address Signals then map to user portion of URI scheme used "international number" Map complete Connected Number Address Signals used prefixed with a "+" to user portion of URI scheme used Address Presentation restriction indicator presentation restricted then Privacy: header Address Signals: "+" CC NDC SN mapped to user portion of URI scheme used ISUP Parameter values IAM: Optional forward call indicator Connected Line Identity Request = requested ANM: Generic number additional connected number Address Presentation restriction indicator = presentation restricted SIP Parameter values INVITE: Supported: from-change 200 OK: P-Asserted-Identity Supported: from-change UPDATE: From: <derived from the additional connected number> P-Asserted-Identity: <derived from the connected number> Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 200 OK (INVITE) ANM UPDATE 200 OK (UPDATE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 305
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.3.3 Communication Diversion (CDIV)	TP number TP_403_001 Reference 7.5.4.2.1 table 7.5.4.2.1.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 hi-targeted-to-uri into ACM Redirection number Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) an ACM is sent. The History-Info entry containing a cause parameter is mapped into the Redirection number: • If CC of the hi-targeted-to-uri is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', '+' and the country code is removed from the digit string and sent in the Address signal of the Redirection number. • If the country code of the hi-targeted-to-uri is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' '+' is removed from the digit string and sent in the Address signal of the Redirection number ISUP Parameter values ACM: Redirection number Nature of address indicator Address signal Derived from the last History-Info entry SIP Parameter values 181: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine TP number TP_403_001A Reference 7.5.4.2.1 table 7.5.4.2.1.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Sending of Generic notification ‘Call is diverting’ Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) an ACM is sent. The Generic notification indicator present in the ACM is set to ‘Call is diverting’ ISUP Parameter values ACM: Generic Notification call is diverting SIP Parameter values 181: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 306 TP number TP_403_002 Reference 7.5.4.2.1 table 7.5.4.2.1.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 escaped Privacy header into ACM Redirection number restriction Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded), an ACM is sent. The Redirection number restriction is set according the escaped Privacy header in the last History entry as indicated in table 6.3.3-1 ISUP Parameter values ACM: Redirection number restriction= PRES_restr SIP Parameter values 181: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value?Privacy=Priv-value >; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine TP number TP_403_003 Reference 7.5.4.2.1 table 7.5.4.2.1.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 Privacy header into ACM Redirection number restriction Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded), an ACM is sent. The Redirection number restriction is set according the Privacy header as indicated in table 6.3.3-1 ISUP Parameter values ACM: Redirection number restriction= PRES_restr SIP Parameter values 181: Privacy=Priv-value History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine Table 6.3.3-1: Mapping of Privacy value into Redirection number restriction CAUSE Priv-value PRES_restr VA_01 history Presentation restricted VA_02 session Presentation restricted VA_03 header Presentation restricted VA_04 none or absent Presentation allowed or absent ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 307 TP number TP_403_004 Reference 7.5.4.2.1 table 7.5.4.2.1.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 Privacy header into ACM Notification subscription options Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) containing a Privacy header, an ACM is sent. The Notification subscription options in the Call Diversion Information parameter is set according the Privacy header in the message body as indicated in table 6.3.3-2 ISUP Parameter values ACM: Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 181: Privacy: Priv-value History-Info: <sip:any proper URI;cause=any value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine Table 6.3.3-2: Mapping of Privacy value into Notification subscription options CAUSE Priv-value SUBS_options VA_01 history presentation not allowed VA_02 session presentation not allowed VA_03 header presentation not allowed VA_04 None or absent Presentation allowed with redirection number TP number TP_403_005 Reference 7.5.4.2.1 table 7.5.4.2.1.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 escaped Privacy header into ACM Notification subscription options Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) containing an escaped Privacy header field in the last hi-targeted-to-uri, an ACM is sent. The Notification subscription options in the Call Diversion Information parameter is set according the escaped Privacy header in the last History entry as indicated in table 6.3.3-3 ISUP Parameter values ACM: Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 181: History-Info: <sip:any proper URI >; index=1, <sip:any proper URI;cause=any value?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine Table 6.3.3-3: Mapping of Privacy value into Notification subscription options CAUSE Priv-value SUBS_options VA_01 history presentation allowed without redirection number VA_02 session presentation allowed without redirection number VA_03 header presentation allowed without redirection number VA_04 None or absent Presentation allowed with redirection number ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 308 TP number TP_403_006 Reference 7.5.4.2.1 table 7.5.4.2.1.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 hi-targeted-to-uri into ACM Redirecting Reason Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) an ACM is sent. The cause parameter of the last hi-entry is mapped into the Redirecting reason in the Call Diversion Information parameter is set as indicated in table 6.3.3-4 ISUP Parameter values ACM: Generic Notification call is diverting Redirection number Call Diversion Information Redirecting reason = Redirecting_Reason SIP Parameter values 181: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=CAUSE_value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded Apply post test routine Table 6.3.3-4: Mapping of cause parameter into Redirecting reason CAUSE CAUSE_value Redirecting_Reason VA_01 404 Unknown VA_02 302 Unconditional VA_03 486 User busy VA_04 408 No reply VA_05 480 Deflection immediate VA_06 503 Mobile subscriber not reachable VA_07 487 Deflection during alerting TP number TP_403_007 Reference 7.5.4.2.1 table 7.5.4.2.1.7 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.5/3 AND PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 hi-targeted-to-uri cause parameter into CPG Event indicator Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) a CPG is sent. The Event indicator is set to 'Redirecting_Reason' as indicated in table 6.3.3-5 ISUP Parameter values CPG: Event=Redirecting_Reason Generic Notification call is diverting Redirection number Call Diversion Information SIP Parameter values 181: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=CAUSE_value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine Table 6.3.3-5: Mapping of cause parameter into Event indicator CAUSE_value Redirecting_Reason VA_01 486 CFB (national use) VA_02 408 CFNR (national use) VA_03 302 CFU (national use) ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 309 TP number TP_403_008 Reference 7.5.4.2.1 table 7.5.4.2.1.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 hi-targeted-to-uri into CPG Redirection number Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) a CPG is sent. The History-Info entry containing a cause parameter is mapped into the Redirection number: • If CC of the hi-targeted-to-uri is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', '+' and the country code is removed from the digit string and sent in the Address signal of the Redirection number. • If the country code of the hi-targeted-to-uri is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' '+' is removed from the digit string and sent in the Address signal of the Redirection number ISUP Parameter values CPG: Redirection number Nature of address indicator Address signal Derived from the last History-Info entry SIP Parameter values 181: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine TP number TP_403_008A Reference 7.5.4.2.1 table 7.5.4.2.1.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Sending of Generic notification ‘Call is diverting’ Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) a CPG is sent. The History-Info entry contains a cause parameter. A Generic notification parameter is present in the CPG message set to ‘Call is diverting’ ISUP Parameter values CPG: Generic Notification call is diverting SIP Parameter values 181: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 310 TP number TP_403_008B Reference 7.5.4.2.1 table 7.5.4.2.1.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Sending of CPG Event indicator ‘Progress’ Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) a CPG is sent. The History-Info entry contains a cause parameter. The Event indicator in the CPG is set to ‘Progress’ ISUP Parameter values CPG: Event indicator Progress SIP Parameter values 181: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine TP number TP_403_009 Reference 7.5.4.2.1 table 7.5.4.2.1.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 escaped Privacy header into CPG Redirection number restriction Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded), a CPG is sent. The Redirection number restriction is set according the escaped Privacy header in the last History entry as indicated in table 6.3.3-1 ISUP Parameter values CPG: Redirection number restriction = PRES_restr SIP Parameter values 181: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine TP number TP_403_010 Reference 7.5.4.2.1 table 7.5.4.2.1.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 Privacy header into early CPG Redirection number restriction Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded), a CPG is sent. The Redirection number restriction is set according the Privacy header as indicated in table 6.3.3-1. ISUP Parameter values CPG: Redirection number restriction = PRES_restr SIP Parameter values 181: Privacy=Priv-value History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 311 TP number TP_403_011 Reference 7.5.4.2.1 table 7.5.4.2.1.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 Privacy header into CPG Notification subscription options Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) containing a Privacy header, a CPG is sent. The Notification subscription options in the Call Diversion Information parameter is set according the Privacy header in the message body as indicated in table 6.3.3-2 ISUP Parameter values CPG: Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 181: Privacy: Priv-value History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine TP number TP_403_012 Reference 7.5.4.2.1 table 7.5.4.2.1.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 escaped Privacy header into CPG Notification subscription options Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) containing an escaped Privacy header field in the last hi-targeted-to-uri, a CPG is sent. The Notification subscription options in the Call Diversion Information parameter is set according the escaped Privacy header in the last History entry as indicated in table 6.3.3-3 ISUP Parameter values CPG: Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 181: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 312 TP number TP_403_013 Reference 7.5.4.2.1 table 7.5.4.2.1.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 hi-targeted-to-uri into CPG Redirecting Reason Test Purpose Ensure that on receipt of 181 (Call Is Being Forwarded) a CPG is sent. The History-Info entry containing a cause parameter is mapped into the Redirecting reason in the Call Diversion Information parameter is set as indicated in table 6.3.3-4 ISUP Parameter values CPG: Generic Notification call is diverting Redirection number Call Diversion Information Redirecting reason= Redirecting_Reason SIP Parameter values 181: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=CAUSE_value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing CPG 181 Call Is Being Forwarded Apply post test routine TP number TP_403_014 Reference 7.5.4.2.1 table 7.5.4.2.1.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 hi-targeted-to-uri into ACM Redirection number Test Purpose Ensure that on receipt of 180 (Ringing) an ACM (subscriber free) is sent. The last History-Info entry containing a cause parameter is mapped into the Redirection number: • If CC of the hi-targeted-to-uri is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', '+' and the country code is removed from the digit string and sent in the Address signal of the Redirection number. • If the country code of the hi-targeted-to-uri is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' '+' is removed from the digit string and sent in the Address signal of the Redirection number ISUP Parameter values ACM: Backward call indicator Called party status=subscriber free Redirection number Nature of address indicator Address signal Derived from the last History-Info entry SIP Parameter values 180: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 313 TP number TP_403_014A Reference 7.5.4.2.1 table 7.5.4.2.1.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Sending of Generic notification ‘Call is diverting’ Test Purpose Ensure that on receipt of 180 (Ringing) an ACM (subscriber free) is sent. The last History-Info entry contains a cause parameter. A Generic notification parameter is present in the sent ACM set to ‘Call is diverting’. ISUP Parameter values ACM: Generic Notification call is diverting SIP Parameter values 180: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine TP number TP_403_015 Reference 7.5.4.2.1 table 7.5.4.2.1.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 escaped Privacy header into ACM Redirection number restriction Test Purpose Ensure that on receipt of 180 (Ringing), an ACM (subscriber free)is sent. The Redirection number restriction is set according the escaped Privacy header in the last History entry as indicated in table 6.3.3-1 ISUP Parameter values ACM: Backward call indicator Called party status=subscriber free Redirection number restriction= PRES_restr SIP Parameter values 180: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine TP number TP_403_016 Reference 7.5.4.2.1 table 7.5.4.2.1.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 Privacy header into ACM Redirection number restriction Test Purpose Ensure that on receipt of 180 (Ringing), an ACM (subscriber free) is sent. The Redirection number restriction is set according the Privacy header as indicated in table 6.3.3-1 ISUP Parameter values ACM: Backward call indicator Called party status=subscriber free Redirection number restriction= PRES_restr SIP Parameter values 180: Privacy=Priv-value History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 314 TP number TP_403_017 Reference 7.5.4.2.1 table 7.5.4.2.1.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 Privacy header into ACM Notification subscription options Test Purpose Ensure that on receipt of 180 (Ringing) containing a Privacy header, an ACM (subscriber free) is sent. The Notification subscription options in the Call Diversion Information parameter is set according the Privacy header in the message body as indicated in table 6.3.3-2 ISUP Parameter values ACM: Backward call indicator Called party status=subscriber free Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 180: Privacy: Priv-value History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine TP number TP_403_018 Reference 7.5.4.2.1 table 7.5.4.2.1.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 escaped Privacy header into ACM Notification subscription options Test Purpose Ensure that on receipt of 180 (Ringing) containing an escaped Privacy header field in the last hi-targeted-to-uri, an ACM (subscriber free) is sent. The Notification subscription options in the Call Diversion Information parameter is set according the escaped Privacy header in the last History entry as indicated in table 6.3.3-3 ISUP Parameter values ACM: Backward call indicator Called party status=subscriber free Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 180: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 315 TP number TP_403_019 Reference 7.5.4.2.1 table 7.5.4.2.1.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 hi-targeted-to-uri into ACM Redirecting Reason Test Purpose Ensure that on receipt of 180 (Ringing) an ACM (subscriber free) is sent. The last History-Info entry containing a cause parameter is mapped into the Redirecting reason in the Call Diversion Information parameter is set as indicated in table 6.3.3-4 ISUP Parameter values ACM: Backward call indicator Called party status=subscriber free Redirection number Call Diversion Information Redirecting reason= Redirecting_Reason SIP Parameter values 180: History-Info: <sip:any proper URI;cause=CAUSE_value>; index=1, <sip:any proper URI>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine TP number TP_403_020 Reference 7.5.4.2.1 table 7.5.4.2.1.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 hi-targeted-to-uri into CPG Redirection number Test Purpose Ensure that on receipt of 180 (Ringing) a CPG Alerting is sent. The last History-Info entry containing a cause parameter is mapped into the Redirection number: • If CC of the hi-targeted-to-uri is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', '+' and the country code is removed from the digit string and sent in the Address signal of the Redirection number. • If the country code of the hi-targeted-to-uri is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' '+' is removed from the digit string and sent in the Address signal of the Redirection number ISUP Parameter values CPG: Redirection number Nature of address indicator Address signal Derived from the last History-Info entry SIP Parameter values 180: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 316 TP number TP_403_020A Reference 7.5.4.2.1 table 7.5.4.2.1.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Sending of Generic notification ‘Call is diverting’ Test Purpose • Ensure that on receipt of 180 (Ringing) a CPG Alerting is sent. The last History-Info entry contains a cause parameter. A Generic notification parameter is present in the sent CPG set to ‘Call is diverting’. ISUP Parameter values CPG: Generic Notification call is diverting SIP Parameter values 180: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine TP number TP_403_020B Reference 7.5.4.2.1 table 7.5.4.2.1.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Sending of Event indicator ‘Alerting’ Test Purpose Ensure that on receipt of 180 (Ringing) a CPG Alerting is sent. The last History-Info entry contains a cause parameter. The Event indicator in the sent CPG is set to ‘Alerting’. ISUP Parameter values CPG: Event=Alerting SIP Parameter values 180: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine TP number TP_403_021 Reference 7.5.4.2.1 table 7.5.4.2.1.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 escaped Privacy header into CPG Redirection number restriction Test Purpose Ensure that on receipt of 180 (Ringing), a CPG Alerting is sent. The Redirection number restriction is set according the escaped Privacy header in the last History entry as indicated in table 6.3.3-1 ISUP Parameter values CPG: Event=Alerting Redirection number restriction= PRES_restr SIP Parameter values 180: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 317 TP number TP_403_022 Reference 7.5.4.2.1 table 7.5.4.2.1.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 Privacy header into CPG Redirection number restriction Test Purpose Ensure that on receipt of 180 (Ringing), a CPG Alerting is sent. The Redirection number restriction is set according the Privacy header as indicated in table 6.3.3-1 ISUP Parameter values CPG: Event=Alerting Redirection number restriction= PRES_restr SIP Parameter values 180: Privacy=Priv-value History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine TP number TP_403_023 Reference 7.5.4.2.1 table 7.5.4.2.1.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 Privacy header into CPG Notification subscription options Test Purpose Ensure that on receipt of 180 (Ringing) containing a Privacy header, a CPG Alerting is sent. The Notification subscription options in the Call Diversion Information parameter is set according the Privacy header in the message body as indicated in table 6.3.3-2 ISUP Parameter values CPG: Event=Alerting Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 180: Privacy: Priv-value History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 318 TP number TP_403_024 Reference 7.5.4.2.1 table 7.5.4.2.1.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 181 escaped Privacy header into CPG Notification subscription options Test Purpose Ensure that on receipt of 180 (Ringing) containing an escaped Privacy header field in the last hi-targeted-to-uri, a CPG Alerting is sent. The Notification subscription options in the Call Diversion Information parameter is set according the escaped Privacy header in the last History entry as indicated in table 6.3.3-3 ISUP Parameter values CPG: Event=Alerting Call Diversion Information Notification subscription options=SUBS_options SIP Parameter values 180: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine TP number TP_403_025 Reference 7.5.4.2.1 table 7.5.4.2.1.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 180 hi-targeted-to-uri into CPG Redirecting Reason Test Purpose Ensure that on receipt of 180 (Ringing) a CPG Alerting is sent. The last History-Info entry containing a cause parameter is mapped into the Redirecting reason in the Call Diversion Information parameter is set as indicated in table 6.3.3-4 ISUP Parameter values CPG: Event=Alerting Redirection number Call Diversion Information Redirecting reason= Redirecting_Reason SIP Parameter values 180: History-Info: <sip:any proper URI >; index=1, <sip:any proper URI;cause=CAUSE_value >; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 319 TP number TP_403_026 Reference 7.5.4.2.1 table 7.5.4.2.1.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 200 OK hi-targeted-to-uri into ANM Redirection number Test Purpose Ensure that on receipt of 200 OK (INVITE) an ANM is sent. The last History-Info entry containing a cause parameter is mapped into the Redirection number: • If CC of the hi-targeted-to-uri is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', '+' and the country code is removed from the digit string and sent in the Address signal of the Redirection number. • If the country code of the hi-targeted-to-uri is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' '+' is removed from the digit string and sent in the Address signal of the Redirection number ISUP Parameter values ANM: Redirection number Nature of address indicator Address signal Derived from the last History-Info entry SIP Parameter values 200: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing ANM 200 OK INVITE ACK Apply post test routine TP number TP_403_027 Reference 7.5.4.2.1 table 7.5.4.2.1.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 200 escaped Privacy header into ANM Redirection number restriction Test Purpose Ensure that on receipt of 200 (INVITE), an ANM is sent. The Redirection number restriction is set according the escaped Privacy header in the last History entry as indicated in table 6.3.3-1 ISUP Parameter values ANM: Redirection number restriction= PRES_restr SIP Parameter values 200 OK: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing ANM 200 OK INVITE ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 320 TP number TP_403_028 Reference 7.5.4.2.1 table 7.5.4.2.1.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 200 Privacy header into ANM Redirection number restriction Test Purpose Ensure that on receipt of 200 OK (INVITE), an ANM is sent. The Redirection number restriction is set according the Privacy header as indicated in table 6.3.3-1 ISUP Parameter values ANM: Redirection number restriction= PRES_restr SIP Parameter values 200 OK: Privacy=Priv-value History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE ACM 181 Call Is Being Forwarded CPG 180 Ringing ANM 200 OK INVITE ACK Apply post test routine TP number TP_403_029 Reference 7.5.4.2.1 table 7.5.4.2.1.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 200 OK hi-targeted-to-uri into CON Redirection number Test Purpose Ensure that on receipt of 200 OK (INVITE) a CON is sent. The History-Info entry containing a cause parameter is mapped into the Redirection number: • If CC of the hi-targeted-to-uri is equal the country code where the SUT is located: Nature of address indicator is set to 'national (significant) number', '+' and the country code is removed from the digit string and sent in the Address signal of the Redirection number. • If the country code of the hi-targeted-to-uri is not equal the country code where the SUT is located: Nature of address indicator is set to 'international number' '+' is removed from the digit string and sent in the Address signal of the Redirection number ISUP Parameter values CON: Redirection number Nature of address indicator Address signal Derived from the last History-Info entry SIP Parameter values 200 OK: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value ; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE CON 200 OK INVITE ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 321 TP number TP_403_030 Reference 7.5.4.2.1 table 7.5.4.2.1.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 200 escaped Privacy header into CON Redirection number restriction Test Purpose Ensure that on receipt of 200 (INVITE), a CON is sent. The Redirection number restriction is set according the escaped Privacy header in the last History entry as indicated in table 6.3.3-1 ISUP Parameter values CON: Redirection number restriction= PRES_restr SIP Parameter values 200 OK: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value?Privacy=Priv-value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE CON 200 OK INVITE ACK Apply post test routine TP number TP_403_031 Reference 7.5.4.2.1 table 7.5.4.2.1.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of 200 Privacy header into CON Redirection number restriction Test Purpose Ensure that on receipt of 200 OK (INVITE), a CON is sent. The Redirection number restriction is set according the Privacy header as indicated in table 6.3.3-1 ISUP Parameter values CON: Redirection number restriction= PRES_restr SIP Parameter values 200 OK: Privacy=Priv-value History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any value>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE CON 200 OK INVITE ACK Apply post test routine TP number TP_403_032 Reference 7.5.4.2.2 table 7.5.4.2.2.1 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of Redirecting number Address signals into History-Info header URI Test Purpose Ensure that on receipt of an IAM containing a Redirecting number parameter, an Original called number parameter and a Redirection Information parameter, an INVITE request is sent and a History-Info header is present. The value of the second last hi-targeted-to-uri Value of Redirecting number is mapped from the Redirecting number Address Signals as indicated in table 6.3.3-6 ISUP Parameter values IAM: Redirecting number Nature of Address: NoA_value Address Signals <any appropriate value> Redirection Information Redirection counter=2 Original called number SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip:Value of Redirecting number;cause=any>; index=1.1 <sip: any proper URI;cause=any>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 322 Table 6.3.3-6: Mapping of Redirecting number into second last Hist-entry NoA_value Value of Redirecting number second last hi-targeted-to-uri VA_01 national (significant) number Add '+' and the country code where the SUT is located to the Address Signal digits of the Redirecting number VA_02 international number Add '+' to the Address Signal digits of the Redirecting number TP number TP_403_033 Reference 7.5.4.2.2 table 7.5.4.2.2.1 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of Redirecting number Address presentation restricted into History-Info header Privacy value Test Purpose Ensure that on receipt of an IAM containing a Redirecting, an Original called number parameter number parameter and a Redirection Information parameter, an INVITE request is sent and a History-Info header is present. A Privacy header is escaped in the second last hi-targeted-to-uri and the PRIV_value is mapped from the Address presentation restricted indicator of the Redirecting number as indicated in table 6.2.5-7 ISUP Parameter values IAM: Redirecting number Address presentation restricted indicator: APRI_value Redirection Information Redirection counter=2 Original called number SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip: any proper URI;cause=any?Privacy=PRIV_value>; index=1.1 <sip: any proper URI;cause=any>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.3.3-7: Mapping of Redirecting number APRI into Privacy header in the second last Hist-entry APRI_value PRIV_value second last hi-targeted-to-uri VA_01 presentation restricted history VA_02 presentation allowed Header absent or 'none' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 323 TP number TP_403_034 Reference 7.5.4.2.2 table 7.5.4.2.2.1 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of Redirection Information Redirecting indicator Test Purpose Ensure that on receipt of an IAM containing a Redirecting number, an Original called number parameter and a Redirection Information parameter, an INVITE request is sent and a History-Info header is present. A Privacy header is escaped in the second last hi-targeted-to-uri and the PRIV_value is mapped from the Redirecting indicator of the Redirection Information as indicated in table 6.2.5-21 ISUP Parameter values IAM: Redirection Information Redirection counter=2 Redirecting indicator=RDIND_value SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip: any proper URI;cause=any?Privacy=PRIV_value>; index=1.1 <sip: any proper URI;cause=any>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.3.3-8: Mapping of Redirecting indicator into Privacy header in the second last Hist-entry RDIND_value PRIV_value second last hi-targeted-to-uri VA_01 Call diverted, all redirection info presentation restricted history VA_02 Call diverted none TP number TP_403_035 Reference 7.5.4.2.2 table 7.5.4.2.2.1 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of Redirection Information Redirection counter Test Purpose Ensure that on receipt of an IAM containing a Redirecting number, an Original called number parameter and a Redirection Information parameter, an INVITE request is sent and a the hi-targeted-to-uri and the index parameter of the Redirection counter as indicated in table 6.3.3-9 ISUP Parameter values IAM: Redirection Information Redirection counter=RDCONT_value SIP Parameter values INVITE: History-Info: HI-ENTRY_values Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 324 Table 6.3.3-9: Mapping of Redirection counter into index parameter of History-Info header RDCONT_value HI-ENTRY_values VA_01 1 <sip:represents the Original called number>; index=1, <sip: represents the Called party number;cause=any>; index=1.1 VA_02 2 <sip: represents the Original called number>; index=1, <sip: represents the Redirecting number;cause=any>; index=1.1, <sip: represents the Called party number;cause=any>; index=1.1.1 VA_03 3 <sip: represents the Original called number>; index=1, <sip: represents any placeholder value;cause=any>; index=1.1, <sip: represents the Redirecting number;cause=404>; index=1.1.1, <sip: represents the Called party number;cause=any>; index=1.1.1.1 VA_04 4 <sip: represents the Original called number>; index=1, <sip: represents any placeholder value;cause=any>; index=1.1, <sip: represents any placeholder value;cause=404>; index=1.1.1, <sip: represents the Redirecting number;cause=404>; index=1.1.1.1, <sip: represents the Called party number;cause=any>; index=1.1.1.1.1 VA_05 5 <sip: represents the Original called number>; index=1, <sip: represents any placeholder value;cause=any>; index=1.1, <sip: represents any placeholder value;cause=404>; index=1.1.1, <sip: represents any placeholder value;cause=404>; index=1.1.1.1, <sip: represents the Redirecting number;cause=404>; index=1.1.1.1.1, <sip: represents the Called party number;cause=any>; index=1.1.1.1.1.1 TP number TP_403_036 Reference 7.5.4.2.2 table 7.5.4.2.2.1 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of Redirection Information Original redirection reason Test Purpose Ensure that on receipt of an IAM containing a Redirecting number an Original called number and a Redirection Information parameter, an INVITE request is sent. The Original redirection reason indicator 'unknown' of the Redirection Information is mapped into the cause parameter '404' of the second hi-targeted-to-uri of the History-Info header in the sent INVITE as indicated in table 6.3.3-10 ISUP Parameter values IAM: Redirection Information Redirection counter=2 Original redirection reason=unknown SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause='404'>; index=1.1, <sip: any proper URI;cause=any>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.3.3-10: Void ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 325 TP number TP_403_037 Reference 7.5.4.2.2 table 7.5.4.2.2.1 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of Redirection Information Redirecting reason Test Purpose Ensure that on receipt of an IAM containing a Redirection number an Original called number and a Redirection Information parameter, an INVITE request is sent. The Redirecting reason indicator REAS_value of the Redirection Information is mapped into the cause parameter Cause_value of the last hi-targeted-to-uri of the History-Info header in the sent INVITE as indicated in table 6.3.3-11 ISUP Parameter values IAM: Redirection Information Redirection counter=2 Redirecting reason =REAS_value SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1, <sip: any proper URI;cause=Cause_value>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.3.3-11: Mapping of Redirecting reason into Reason header in the last Hist-entry REAS_value Cause_value Second last hi-targeted-to-uri VA_01 unknown 404 VA_02 unconditional 302 VA_03 User Busy 486 VA_04 No reply 408 VA_05 Deflection during alerting 302 VA_06 Deflection immediate response 302 VA_07 Mobile subscriber not reachable 503 TP number TP_403_038 Reference 7.5.4.2.2 table 7.5.4.2.2.1 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of Called party number Address Signals Test Purpose Ensure that on receipt of an IAM containing a Redirecting number parameter and a Redirection Information parameter, an INVITE request is sent and a History-Info header is present. The Called party number is mapped into the last hi-targeted-to-uri of the History-Info header as indicated in table 6.3.3-12 ISUP Parameter values IAM: Called party number Nature of Address: NoA_value Address Signals SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1, <sip:Value of Called party number;cause=any>; index=1.1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.3.3-12: Mapping of Called party number into last Hist-entry NoA_value Value of Called party number last hi-targeted-to-uri VA_01 national (significant) number Add '+' and the country code where the SUT is located to the Address Signal digits of the Called party number VA_02 international number Add '+' to the Address Signal digits of the Called party number ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 326 TP number TP_403_039 Reference 7.5.4.2.2 table 7.5.4.2.2.1 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of Original called number Address Signals Test Purpose Ensure that on receipt of an IAM containing an Original called number parameter and a Redirection Information parameter, an INVITE request is sent and a History-Info header is present. The value of the first hi-targeted-to-uri Value of Original called number is mapped from the Original called number Address Signals as indicated in table 6.3.3-13 ISUP Parameter values IAM: Original called number Nature of Address: NoA_value Address Signals <Digits> SIP Parameter values INVITE: History-Info: <sip:Value of Original called number>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.3.3-13: Mapping of Original called number into first Hist-entry NoA_value Value of Original called number First hi-targeted-to-uri VA_01 national (significant) number Add '+' and the country code where the SUT is located to the Address Signal digits of the Original called number VA_02 international number Add '+' to the Address Signal digits of the Original called number TP number TP_403_040 Reference 7.5.4.2.2 table 7.5.4.2.2.1 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of Original called number Address presentation restricted indicator Test Purpose Ensure that on receipt of an IAM containing an Original called number parameter, an INVITE request is sent and a History-Info header is present. A Privacy header escaped in the first hi-targeted-to-uri and the PRIV_value is mapped from the Address presentation restricted indicator of the Original called number as indicated in table 6.3.3-14 ISUP Parameter values IAM: Original called number Address presentation restricted indicator: APRI_value Address Signals <any appropriate value> SIP Parameter values INVITE: History-Info: <sip:any proper URI?Privacy=PRIV_value>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows ISUP MGCF Mg IAM INVITE Apply post test routine Table 6.3.3-14: Mapping of Original called number APRI into Privacy header in the first Hist-entry APRI_value PRIV_value first hi-targeted-to-uri VA_01 presentation restricted history VA_02 presentation allowed none ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 327 TP number TP_403_041 Reference 7.5.4.3 table 7.5.4.3.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Second latest History-Info header field entry mapped into Redirecting number Nature of address indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Nature of address indicator of the Redirecting number is mapped from the hi-targeted-to-uri in hi-entry before last hi-entry containing a cause-param URI parameter as indicated in table 6.3.3-15 ISUP Parameter values IAM: Redirecting number Nature of address indicator=NoA_value SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip:Second last entry URI;cause=any>; index=1.1, <sip:any proper URI;cause=any>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.3.3-15: Mapping of second last first Hist-entry into Redirecting number Nature of address indicator Second last entry URI NoA_value VA_01 CC is equal to the country code of the country where MGCF is located AND the next ISUP node is located in the same country national (significant) number VA_02 CC is not equal to the country code of the country where MGCF is located international number TP number TP_403_042 Reference 7.5.4.3 table 7.5.4.3.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Second latest History-Info header field entry is mapped into Redirecting number Address signal Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Address signal of the Redirecting number is mapped from the hi-targeted-to-uri in hi-entry before last hi-entry containing a cause-param URI parameter in the format +'CC+NDC+SN' as indicated in table 6.3.3-16 ISUP Parameter values IAM: Redirecting number Address signal derived from the second last Hist-entry SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip:Second last entry URI;cause=any>; index=1.1, <sip:any proper URI;cause=any>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 328 Table 6.3.3-16: Mapping of second last first Hist-entry into Redirecting number Address signal Second last entry URI NoA_value VA_01 CC is equal to the country code of the country where MGCF is located AND the next ISUP node is located in the same country '+CC' is removed from the userpart digit string used in the Redirecting number Address signal VA_02 CC is not equal to the country code of the country where MGCF is located '+' is removed from the userpart digit string used in the Redirecting number Address signal TP number TP_403_043 Reference 7.5.4.3 table 7.5.4.3.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Second latest History-Info header escaped Privacy header is mapped into Redirecting number Address presentation restricted indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Address presentation restricted indicator of the Redirecting number is mapped from the escaped Privacy header of the second latest History-Info header field entry containing a cause parameter as indicated in table 6.3.3-17 ISUP Parameter values IAM: Redirecting number Address presentation restricted indicator=APRI_value SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any?Privacy=PRIV_value>; index=1.1, <sip:any proper URI;cause=any>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_403_044 Reference 7.5.4.3 table 7.5.4.3.2 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Privacy header is mapped into Redirecting number Address presentation restricted indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Address presentation restricted indicator of the Redirecting number is mapped from the Privacy header of the received INVITE request as indicated in table 6.3.3-17. ISUP Parameter values IAM: Redirecting number Address presentation restricted indicator=APRI_value SIP Parameter values INVITE: Privacy: PRIV_value History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 329 Table 6.3.3-17: Mapping of Privacy header into Redirecting number Address presentation restricted indicator PRIV_value APRI_value VA_01 history presentation restricted VA_02 session presentation restricted VA_03 header presentation restricted VA_04 none presentation allowed VA_05 Header absent presentation allowed TP number TP_403_045 Reference 7.5.4.3 table 7.5.4.3.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Escaped Privacy header is mapped into Redirection information Redirecting indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Redirecting indicator of the Redirection information is mapped from the escaped Privacy header of the second last History-Info header field entry and last History-Info header field in the received INVITE request as indicated in table 6.3.3-18 ISUP Parameter values IAM: Redirection information Redirecting indicator=RDIND_value SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any?Privacy=PRIV_value>; index=1.1, <sip:any proper URI;cause=any?Privacy=PRIV_value>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_403_046 Reference 7.5.4.3 table 7.5.4.3.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Privacy header is mapped into Redirection information Redirecting indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Redirecting indicator of the Redirection information is mapped from the Privacy header in the received INVITE request as indicated in table 6.3.3-18 ISUP Parameter values IAM: Redirection information Redirecting indicator=RDIND_value SIP Parameter values INVITE: Privacy: PRIV_value History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1, <sip:any proper URI;cause=any>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 330 Table 6.3.3-18: Mapping of Privacy header into Redirecting indicator PRIV_value RDIND_value VA_01 history Call diverted, all redirection info presentation restricted VA_02 session Call diverted, all redirection info presentation restricted VA_03 header Call diverted, all redirection info presentation restricted VA_04 none Call diverted VA_05 Privacy header field absent Call diverted TP number TP_403_047 Reference 7.5.4.3 table 7.5.4.3.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name 'cause' parameter is mapped into Redirection information Redirecting reason Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Redirecting reason of the Redirection information is mapped from the cause parameter of the latest History-Info header field entry containing a cause parameter in the received INVITE request as indicated in table 6.3.3-19 ISUP Parameter values IAM: Redirection information Original redirection reason=unknown/not available Redirecting reason=REAS_value SIP Parameter values INVITE: History-Info: <sip:any proper URI>; index=1, <sip:any proper URI;cause=any>; index=1.1, <sip:any proper URI; cause=Cause_value>; index=1.1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.3.3-19: Mapping of cause parameter in the last Hist-entry into Redirecting reason Cause_value Last hi-targeted-to-uri REAS_value VA_01 404 Unknown/not available VA_02 302 Unconditional VA_03 486 User busy VA_04 408 No reply VA_05 480 Deflection immediate response VA_06 487 Deflection during alerting VA_07 503 Mobile subscriber not reachable ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 331 TP number TP_403_048 Reference 7.5.4.3 table 7.5.4.3.3 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Hi-index is mapped into Redirection information Redirection counter Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Redirection counter of the Redirection information is mapped from the hi-index of the last History-Info header field entry in the received INVITE request as indicated in table 6.3.3-20. The number of dots in the hi-index value is equal to the value of the Redirection counter ISUP Parameter values IAM: Redirection information Redirection counter=RDCONT_value SIP Parameter values INVITE: History-Info: ENTRY_values Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.3.3-20: Mapping of Redirection counter into index parameters of History-Info header ENTRY_values RDCONT_value VA_01 <sip:represents the Original called number>; index=1, <sip:represents the Called party number;cause=any>; index=1.1 1 VA_02 <sip:represents the Original called number>; index=1, <sip:represents the Redirecting number;cause=any>; index=1.1, <sip:represents the Called party number;cause=any>; index=1.1.1 2 VA_03 <sip:represents the Original called number>; index=1, <sip:any proper URI;cause=any>; index=1.1, <sip:represents the Redirecting number;cause=any>; index=1.1.1, <sip:represents the Called party number;cause=any>; index=1.1.1.1 3 VA_04 <sip:represents the Original called number>; index=1, <sip:any proper URI;cause=any>; index=1.1, <sip:any proper URI;cause=any>; index=1.1.1, <sip:represents the Redirecting number;cause=any>; index=1.1.1.1, <sip:represents the Called party number;cause=any>; index=1.1.1.1.1 4 VA_05 <sip:represents the Original called number>; index=1, <sip:any proper URI;cause=any>; index=1.1, <sip:any proper URI;cause=any>; index=1.1.1, <sip:any proper URI;cause=any>; index=1.1.1.1, <sip:represents the Redirecting number;cause=any>; index=1.1.1.1.1, <sip:represents the Called party number;cause=any>; index=1.1.1.1.1.1 5 ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 332 TP number TP_403_049 Reference 7.5.4.3 table 7.5.4.3.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name First History-Info header field entry is mapped into Original called number Nature of address indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Nature of address indicator of the Original called is mapped from the first History-Info header field entry in the format +'CC+NDC+SN' as indicated in table 6.3.3-21 ISUP Parameter values IAM: Original called number Numbering Plan Indicator=ISDN (Telephony) numbering plan (Recommendation E.164 [i.1]) Nature of address indicator=NoA_value SIP Parameter values INVITE: History-Info: <sip:First entry URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine Table 6.3.3-21: Mapping of first Hist-entry into Original called number Nature of address indicator First entry URI NoA_value VA_01 CC is equal to the country code of the country where MGCF is located AND the next ISUP node is located in the same country national (significant) number VA_02 CC is not equal to the country code of the country where MGCF is located international number TP number TP_403_050 Reference 7.5.4.3 table 7.5.4.3.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name First History-Info header field entry is mapped into Original called Address signal Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Address signal of the Original called number is mapped from the first History-Info header field entry in the format +'CC+NDC+SN' as indicated in table 6.3.3-22 ISUP Parameter values IAM: Original called Numbering Plan Indicator=ISDN (Telephony) numbering plan (Recommendation E.164 [i.1]) Address signal derived from the first Hist-entry SIP Parameter values INVITE: History-Info: <sip:First entry URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 333 Table 6.3.3-22: Mapping of first Hist-entry into Original called number Address signal First entry URI NoA_value VA_01 CC is equal to the country code of the country where MGCF is located AND the next ISUP node is located in the same country '+CC' is removed from the userpart digit string used in the Original called number Address signal VA_02 CC is not equal to the country code of the country where MGCF is located '+' is removed from the userpart digit string used in the Original called number Address signal TP number TP_403_051 Reference 7.5.4.3 table 7.5.4.3.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name First History-Info header field entry escaped Privacy header is mapped into Original called number Address presentation restricted indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Address presentation restricted indicator of the Original called number is mapped from the escaped Privacy header of the first History-Info header field entry as indicated in table 6.3.3-23 ISUP Parameter values IAM: Original called Address presentation restricted indicator=APRI_value SIP Parameter values INVITE: History-Info: <sip:First entry URI?Privacy=PRIV_value>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_403_052 Reference 7.5.4.3 table 7.5.4.3.4 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Privacy header is mapped into Original called number Address presentation restricted indicator Test Purpose Ensure that on receipt of an INVITE request containing a History-Info header, an IAM is sent and a Redirecting number an Original called number and a Redirection information parameter is present. The Address presentation restricted indicator of the Original called number is mapped from the Privacy header of the received INVITE request as indicated in table 6.3.3-23 ISUP Parameter values IAM: Original called Address presentation restricted indicator=APRI_value SIP Parameter values INVITE: Privacy: PRIV_value History-Info: <sip:First entry URI>; index=1, <sip:any proper URI;cause=any>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 334 Table 6.3.3-23: Mapping of Privacy header into Redirecting number Address presentation restricted indicator PRIV_value APRI_value VA_01 history presentation restricted VA_02 session presentation restricted VA_03 header presentation restricted VA_04 none presentation allowed VA_05 Header absent presentation allowed TP number TP_403_053 Reference 7.5.4.3 table 7.5.4.3.8 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of ACM Redirection number into 181 (Being forwarded) History-Info header Test Purpose Ensure that on receipt of an ACM a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Redirection number is mapped into the hi-targeted-to-uri in a History-Info header containing one hi-entry in the sent 181 as indicated in table 6.3.3-24 ISUP Parameter values ACM: Backward call indicator Called party statue='no indication' Generic notification=call is diverting Call diversion information Redirection number Nature of address indicator=NOA_value Address signal Digits SIP Parameter values 181: History-Info: sip: LAST_HIST_URI;cause=any>; index=1 Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM Apply post test routine Table 6.3.3-24: Mapping Redirection number into History-Info header NOA_value History-Info header: LAST_HIST_URI VA_01 national (significant) number Add '+' and CC (of the country where the MGCF is located) to Redirection number Address Signals then map to user portion of the last hi-targeted-to-uri in the format '+ CC NDC SN'. VA_01 international number Map complete Redirection number Address Signals and '+' to user portion of the last hi-targeted-to-uri in the format '+ CC NDC SN' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 335 TP number TP_403_054 Reference 7.5.4.3 table 7.5.4.3.8 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of ACM Redirecting reason into 181 (Being forwarded) History-Info header cause parameter Test Purpose Ensure that on receipt of an ACM a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Call diversion information Redirecting reason is mapped into the cause parameter of the last hi-targeted-to-uri in a History-Info header in the sent 181 as indicated in table 6.3.3-25 ISUP Parameter values ACM: Backward call indicator Called party statue='no indication' Generic notification=call is diverting Redirection number Call diversion information Redirecting reason =REAS_value SIP Parameter values 181: History-Info: sip: LAST_HIST_URI;cause=Cause_value>; index=1 Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM Apply post test routine Table 6.3.3-25: Mapping of Redirecting reason into cause parameter CAUSE Redirecting_Reason REAS_value Cause parameter, CAUSE_value VA_01 unknown 404 VA_02 unconditional 302 VA_03 User Busy 486 VA_04 No reply 408 VA_05 Deflection during alerting 487 VA_06 Deflection immediate response 480 VA_07 Mobile subscriber not reachable 503 TP number TP_403_055 Reference 7.5.4.3 table 7.5.4.3.8 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of ACM Notification subscription options no 181 (Being forwarded) is sent Test Purpose Ensure that on receipt of an ACM a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, if the Call diversion information Notification subscription options is set to presentation not allowed no 181 (Being forwarded) is sent ISUP Parameter values ACM: Generic notification=call is diverting Redirection number Call diversion information Notification subscription options=presentation not allowed SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 336 TP number TP_403_056 Reference 7.5.4.3 table 7.5.4.3.8 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of ACM Notification subscription options into 181 (Being forwarded) escaped Privacy header Test Purpose Ensure that on receipt of an ACM a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Call diversion information Notification subscription options is mapped into the escaped Privacy header of the last hi-targeted-to-uri in a History-Info header in the sent 181 as indicated in table 6.3.3-26 ISUP Parameter values ACM: Generic notification=call is diverting Redirection number Call diversion information Notification subscription options=NSO_value SIP Parameter values 181: History-Info: sip: LAST_HIST_URI;cause=any?Privacy=PRIV_value>; index=1 Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM Apply post test routine Table 6.3.3-26: Mapping of Notification subscription options into Privacy header CAUSE NSO_value PRIV_value VA_01 Unknown history VA_02 presentation allowed with redirection number Header not present VA_03 presentation allowed without redirection number history TP number TP_403_057 Reference 7.5.4.3 table 7.5.4.3.9 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of CPG Redirection number into 181 (Being forwarded) History-Info header Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Progress' a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Redirection number is mapped into the hi-targeted-to-uri in a History-Info header in the sent 181 as indicated in table 6.3.3-24 ISUP Parameter values CPG: Event=Progress Generic notification=call is diverting Call diversion information Redirection number Nature of address indicator=NOA_value Address signal Digits SIP Parameter values 181: History-Info: <sip:LAST_HIST_URI;cause=any>; index=1 Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 181 Being forwarded CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 337 TP number TP_403_058 Reference 7.5.4.3 table 7.5.4.3.9 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of CPG Redirecting reason into 181 (Being forwarded) History-Info header cause parameter Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Progress' a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Call diversion information Redirecting reason is mapped into the cause parameter of the last hi-targeted-to-uri in a History-Info header in the sent 181 as indicated in table 6.3.3-25 ISUP Parameter values CPG: Event=Progress Generic notification=call is diverting Redirection number Call diversion information Redirecting reason =REAS_value SIP Parameter values 181: History-Info: <sip:derived from Redirection number in ACM;cause=Cause_value>; index=1 Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 181 Being forwarded CPG Apply post test routine TP number TP_403_059 Reference 7.5.4.3 table 7.5.4.3.9 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of CPG Notification subscription option presentation not allowed no 181 (Being forwarded) is sent Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Progress' a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, if the Call diversion information Notification subscription options is set to presentation not allowed no 181 (Being forwarded) is sent ISUP Parameter values CPG: Event=Progress Generic notification=call is diverting Redirection number Call diversion information Notification subscription options=presentation not allowed SIP Parameter values Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 338 TP number TP_403_060 Reference 7.5.4.3 table 7.5.4.3.9 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of CPG Notification subscription options into 181 (Being forwarded) escaped Privacy header Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Progress' a Redirection number and the Call diversion parameter is present as an indication a call diversion occurred, a 181 (Being forwarded) is sent. The Call diversion information Notification subscription options is mapped into the escaped Privacy header of the hi-targeted-to-uri in a History-Info header in the sent 181 as indicated in table 6.3.3-26 ISUP Parameter values CPG: Event=Progress Generic notification=call is diverting Redirection number Call diversion information Notification subscription options=NSO_value SIP Parameter values 181: History-Info: <sip:any proper URI;cause=any?Privacy=PRIV_value >; index=1 Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM 181 Being forwarded CPG Apply post test routine TP number TP_403_061 Reference 7.5.4.3 table 7.5.4.3.8 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of a CPG Alerting Redirection number into 180 (Ringing) History-Info header Redirecting reason is mapped into the cause parameter Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Alerting' a Redirection number is present, a 180 (Ringing) is sent. The Redirection number Address signal digits are mapped into the hi-targeted-to-uri in a History-Info header in the sent 180 (Ringing) as indicated in table 6.3.3-24 and the cause parameter value is mapped from a previous received Redirecting reason as indicated in table 6.3.3-25 ISUP Parameter values ACM: Call diversion information Redirecting reason =REAS_value Redirection number CPG: Event indicator=Alerting Redirection number Nature of address indicator=NOA_value Address signal Digits SIP Parameter values 180: History-Info: <sip:derived from Redirection number in CPG;cause=Cause_value>; index=1 Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM 180 Ringing CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 339 TP number TP_403_062 Reference 7.5.4.3 table 7.5.4.3.7 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of CPG Alerting Redirection Number Restriction into 180 (Ringing) Privacy header Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Alerting' a Redirection Number Restriction parameter is present, a 180 (Ringing) is sent. The Redirection Number Restriction parameter value is mapped into the Privacy header in the sent 180 as indicated in table 6.3.3-27 ISUP Parameter values ACM: Backward call indicator Called party status=no indication Generic notification=call is diverting Call diversion information Redirection number CPG: Event indicator=Alerting Redirection Number Restriction=PRES_restr SIP Parameter values 180: Privacy=PRIV_value Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM 180 Ringing CPG Apply post test routine Table 6.3.3-27: Mapping of Redirection Number Restriction parameter into Privacy header CAUSE Redirection Number Restriction PRES_restr Privacy PRIV_value VA_01 Presentation allowed 'none' OR Header not present VA_02 Presentation restricted 'History' ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 340 TP number TP_403_063 Reference 7.5.4.3 table 7.5.4.3.8 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of ANM Redirection number into 200 OK History-Info header Redirecting reason is mapped into the cause parameter Test Purpose Ensure that on receipt of an ANM a Redirection number is present, a 200 OK (INVITE) is sent. The Redirection number Address signal digits are mapped into the last hi-targeted-to-uri in a History-Info header in the sent 200 OK as indicated in table 6.3.3-24 and the cause parameter value is mapped from a previous received Redirecting reason as indicated in table 6.3.3-25 ISUP Parameter values ACM: Backward call indicator Called party status=no indication Generic notification=call is diverting Call diversion information Redirecting reason =REAS_value Redirection number ANM: Redirection number Nature of address indicator=NOA_value Address signal Digits SIP Parameter values 200 OK: History-Info: <sip:unknown@unknown.invalid>; index=1, <sip:LAST_HIST_URI;cause=Cause_value>; index=1.1 Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM 180 Ringing CPG 200 OK INVITE ANM ACK Apply post test routine TP number TP_403_064 Reference 7.5.4.3 table 7.5.4.3.7 TSS reference IMS-SS/CDIV/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/5 Test Purpose name Mapping of ANM Redirection Number Restriction into 200 OK INVITE Privacy header Test Purpose Ensure that on receipt of an ANM a Redirection Number Restriction parameter is present as an indication a call diversion occurred, a 200 OK INVITE is sent. The Redirection Number Restriction parameter value is mapped into the Privacy header in the sent 200 OK INVITE as indicated in table 6.3.3-27 ISUP Parameter values ACM: Generic notification=call is diverting Call diversion information Redirection number ANM: Event indicator=Alerting Redirection Number Restriction=PRES_restr SIP Parameter values 200 OK INVITE: Privacy=PRIV_value Comments Message flows Mg MGCF ISUP INVITE IAM 181 Being forwarded ACM 180 Ringing CPG 200 OK INVITE ANM ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 341
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.3.4 Conference call (CONF)	TP number TP_404_001 Reference 7.5.6.2 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name 'isfocus' parameter and conference URI in Contact header in ACK received, a SUBSCRIBE is sent Test Purpose Ensure that on receipt of an INVITE request and a Contact header field is present containing the conference URI and the 'isfocus' parameter, a SUBSCRIBE request is sent after the ACK was received. The Request URI contains the value received in the Contact header in the ACK, the To header is set to the value sent in the 180 Ringing, the P-Asserted-Identity is set to the value of the P-Asserted-Identity sent in the 180 Ringing or the 200 OK INVITE the Privacy header is sent as in the 180 Ringing or 200 OK INVITE ISUP Parameter values SIP Parameter values INVITE: Contact: <conference URI>; isfocus SUBSCRIBE: Request URI derived from the Contact header To: <URI equal to the value in the 180> P-Asserted-Identity: < URI equal to the value in the 180 or 200> Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK SUBSCRIBE 202 Accepted Apply post test routine TP number TP_404_002 Reference 7.5.6.2 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name 'isfocus' parameter and conference URI in Contact header in 200 OK received, a SUBSCRIBE is sent Test Purpose Ensure that on receipt of a 200 OK INVITE successful final response and a Contact header field is present containing the conference URI and the 'isfocus' parameter, a SUBSCRIBE request is sent. The Request URI contains the value received in the Contact header in the 200 OK, the From header is set to the value sent in the initial INVITE request, the P-Asserted-Identity is set to the value of the P-Asserted-Identity sent in the initial INVITE request the Privacy header is sent as in the initial INVITE ISUP Parameter values SIP Parameter values 200: Contact: <conference URI>; isfocus SUBSCRIBE: From: <URI equal to the value in the INVITE> P-Asserted-Identity: < URI equal to the value in the INVITE> Comments Message flows Mg MGCF ISUP IAM INVITE 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK SUBSCRIBE 202 Accepted Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 342 TP number TP_404_003 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'Conference established' at the I-MGCF Test Purpose Ensure that on receipt of an initial INVITE request and the Contact header contains the isfocus parameter, a SUBCRIBE request is sent. Ensure that on receipt of a NOTIFY request as a response to the SUBSCRIBE request and a XML conference-info instance is present, the 'conference-state' 'active' element is set to 'true' an ISUP CPG message is set and the Generic notification parameter is set to 'Conference established' ISUP Parameter values CPG: Generic notification Conference established SIP Parameter values INVITE: Contact: <conference URI>; isfocus NOTIFY: Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info conference-state active>true< Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying 180 Ringing ACM 200 OK (INVITE) ANM ACK SUBSCRIBE 202 Accepted NOTIFY CPG 200 OK (NOTIFY) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 343 TP number TP_404_004 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'Conference established' at the O-MGCF Test Purpose Ensure that on receipt of an INVITE request after a session was established and the Contact header contains the isfocus parameter, a SUBCRIBE request is sent. Ensure that on receipt of a NOTIFY request as a response to the SUBSCRIBE request and a XML conference-info instance is present, the 'active' sub element of the 'conference-state' element is set to 'true' an ISUP CPG message is set and the Generic notification parameter is set to 'Conference established'. The INVITE request contains also a Replaces header to terminate the originally session by sending a BYE request ISUP Parameter values CPG: Generic notification Conference established SIP Parameter values INVITE 1: CallID: xxx INVITE 2: CallID: yyy Contact: <conference URI>; isfocus Replaces: xxx; to-tag=<>;from-tag=<> NOTIFY: Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info conference-state active>true< BYE: CallID: xxx Comments Note that the INVITE received in the confirmed dialogue is originated by the conference focus. The originally dialogue have to terminated. Message flows Mg MGCF ISUP IAM INVITE 1 100 Trying ACM 180 Ringing ANM 200 OK (INVITE) ACK INVITE 2 200 OK (INVITE) ACK SUBSCRIBE 202 Accepted CPG NOTIFY 200 OK (NOTIFY) BYE 200 OK (BYE) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 344 TP number TP_404_005 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'other party added' at the I-MGCF Test Purpose An established conference is already indicated by receipt of an adequate NOTIFY request at the I-MGCF. Ensure that on receipt of a NOTIFY request and the 'entity' attribute of the 'endpoint' element does not contain the ISUP address as received in the To header and the 'status' sub element of the 'endpoint' element is set to connected, an ISUP CPG message is sent the Generic notification indicator is set to 'other party added' ISUP Parameter values CPG: Generic notification other party added SIP Parameter values NOTIFY: To: <ISUP address> Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info users user endpoint entity="<not URI of ISUP>" status>connected< Comments Message flows Mg MGCF ISUP Session is established and joined in a conference NOTIFY CPG 200 OK (NOTIFY) Apply post test routine TP number TP_404_006 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'other party added' at the O-MGCF Test Purpose An established conference is already indicated by receipt of an adequate NOTIFY request at the O-MGCF. Ensure that on receipt of a NOTIFY request and the 'entity' attribute of the 'endpoint' element does not contain the ISUP address as received in the To header and the 'status' sub element of the 'endpoint' element is set to connected, an ISUP CPG message is sent the Generic notification indicator is set to 'other party added' ISUP Parameter values CPG: Generic notification other party added SIP Parameter values NOTIFY: To: <ISUP address> Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info users user endpoint entity="<not URI of ISUP>" status>connected< Comments Message flows Mg MGCF ISUP Session is established and joined in a conference CPG NOTIFY 200 OK (NOTIFY) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 345 TP number TP_404_007 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'isolated' at the I-MGCF Test Purpose An established conference is already indicated by receipt of an adequate NOTIFY request at the I-MGCF. Ensure that on receipt of a NOTIFY request and the 'entity' attribute of the 'endpoint' element contains the ISUP address as received in the To header and the 'status' sub element of the 'endpoint' element is set to on-hold, an ISUP CPG message is sent the Generic notification indicator is set to 'isolated' ISUP Parameter values CPG: Generic notification Isolated SIP Parameter values NOTIFY: To: <ISUP address> Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info users user endpoint entity="<URI of ISUP>" status>on-hold< Comments Message flows Mg MGCF ISUP Session is established and joined in a conference CASE A NOTIFY CPG 200 OK (NOTIFY) CASE B NOTIFY CPG 200 OK (NOTIFY) INVITE(sendonly) 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 346 TP number TP_404_008 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'isolated' at the O-MGCF Test Purpose An established conference is already indicated by receipt of an adequate NOTIFY request at the O-MGCF. Ensure that on receipt of a NOTIFY request and the 'entity' attribute of the 'endpoint' element contains the ISUP address as received in the To header and the 'status' sub element of the 'endpoint' element is set to on-hold, an ISUP CPG message is sent the Generic notification indicator is set to 'isolated' ISUP Parameter values CPG: Generic notification isolated SIP Parameter values NOTIFY: To: <ISUP address> Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info users user endpoint entity="<URI of ISUP>" status>on-hold< Comments Message flows Mg MGCF ISUP Session is established and joined in a conference CASE A CPG NOTIFY 200 OK (NOTIFY) CASE B CPG NOTIFY 200 OK (NOTIFY) INVITE(sendonly) 200 OK (INVITE) ACK Apply post test routine TP number TP_404_009 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'other party isolated' at the I-MGCF Test Purpose An established conference is already indicated by receipt of an adequate NOTIFY request at the I-MGCF. Ensure that on receipt of a NOTIFY request and the 'entity' attribute of the 'endpoint' element does not contain the ISUP address as received in the To header and the 'status' sub element of the 'endpoint' element is set to on-hold, an ISUP CPG message is sent the Generic notification indicator is set to 'other party isolated' ISUP Parameter values CPG: Generic notification other party isolated SIP Parameter values NOTIFY: To: <ISUP address> Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info users user endpoint entity="<not URI of ISUP>" status>on-hold< Comments Message flows Mg MGCF ISUP Session is established and joined in a conference NOTIFY CPG 200 OK (NOTIFY) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 347 TP number TP_404_010 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'other party isolated' at the O-MGCF Test Purpose An established conference is already indicated by receipt of an adequate NOTIFY request at the O-MGCF. Ensure that on receipt of a NOTIFY request and the 'entity' attribute of the 'endpoint' element does not contain the ISUP address as received in the To header and the 'status' sub element of the 'endpoint' element is set to on-hold, an ISUP CPG message is sent the Generic notification indicator is set to 'other party isolated' ISUP Parameter values CPG: Generic notification other party isolated SIP Parameter values NOTIFY: To: <ISUP address> Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info users user endpoint entity="<not URI of ISUP>" status>on-hold< Comments Message flows Mg MGCF ISUP Session is established and joined in a conference CPG NOTIFY 200 OK (NOTIFY) Apply post test routine TP number TP_404_011 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'reattached' at the I-MGCF Test Purpose An established conference is already indicated by receipt of an adequate NOTIFY request and isolated at the I-MGCF. Ensure that on receipt of a NOTIFY request and the 'entity' attribute of the 'endpoint' element contains the ISUP address as received in the To header and the 'status' sub element of the 'endpoint' element is set to connected, an ISUP CPG message is sent the Generic notification indicator is set to 'reattached' ISUP Parameter values CPG: Generic notification reattached SIP Parameter values NOTIFY: To: <ISUP address> Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info users user endpoint entity="<URI of ISUP>" status>connected< Comments Message flows Mg MGCF ISUP Session is established joined in a conference and isolated CASE A NOTIFY CPG 200 OK (NOTIFY) CASE B NOTIFY CPG 200 OK (NOTIFY) INVITE(sendrecv) 200 OK (INVITE) ACK Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 348 TP number TP_404_012 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'reattached' at the O-MGCF Test Purpose An established conference is already indicated by receipt of an adequate NOTIFY request and isolated at the I-MGCF. Ensure that on receipt of a NOTIFY request and the 'entity' attribute of the 'endpoint' element contains the ISUP address as received in the To header and the 'status' sub element of the 'endpoint' element is set to connected, an ISUP CPG message is sent the Generic notification indicator is set to 'reattached' ISUP Parameter values CPG: Generic notification Reattached SIP Parameter values NOTIFY: To: <ISUP address> Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info users user endpoint entity="<URI of ISUP>" status>connected< Comments Message flows Mg MGCF ISUP Session is established joined in a conference and isolated CASE A CPG NOTIFY 200 OK (NOTIFY) CASE B CPG NOTIFY 200 OK (NOTIFY) INVITE(sendrecv) 200 OK (INVITE) ACK Apply post test routine TP number TP_404_013 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'other party reattached' at the I-MGCF Test Purpose An established conference is already indicated by receipt of an adequate NOTIFY request and another party is isolated at the I-MGCF. Ensure that on receipt of a NOTIFY request and the 'entity' attribute of the 'endpoint' element does not contain the ISUP address as received in the To header and the 'status' sub element of the 'endpoint' element is set to connected, an ISUP CPG message is sent the Generic notification indicator is set to 'other party reattached' ISUP Parameter values CPG: Generic notification other party reattached SIP Parameter values NOTIFY: To: <ISUP address> Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info users user endpoint entity="<not URI of ISUP>" status>connected< Comments Message flows Mg MGCF ISUP Session is established joined in a conference and another party was isolated NOTIFY CPG 200 OK (NOTIFY) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 349 TP number TP_404_014 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'other party reattached' at the O-MGCF Test Purpose An established conference is already indicated by receipt of an adequate NOTIFY request and another party is isolated at the O-MGCF. Ensure that on receipt of a NOTIFY request and the 'entity' attribute of the 'endpoint' element does not contain the ISUP address as received in the To header and the 'status' sub element of the 'endpoint' element is set to connected, an ISUP CPG message is sent the Generic notification indicator is set to 'other party reattached' ISUP Parameter values CPG: Generic notification other party reattached SIP Parameter values NOTIFY: To: <ISUP address> Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info users user endpoint entity="<not URI of ISUP>" status>connected< Comments Message flows Mg MGCF ISUP Session is established joined in a conference and another party was isolated CPG NOTIFY 200 OK (NOTIFY) Apply post test routine TP number TP_404_015 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'other party disconnected' at the I-MGCF Test Purpose An established conference is already indicated by receipt of an adequate NOTIFY request at the I-MGCF. Ensure that on receipt of a NOTIFY request and the 'entity' attribute of the 'endpoint' element does not the ISUP address as received in the To header and the 'status' sub element of the 'endpoint' element is set to dialled-out, an ISUP CPG message is sent the Generic notification indicator is set to 'other party disconnected' ISUP Parameter values CPG: Generic notification other party disconnected SIP Parameter values NOTIFY: To: <ISUP address> Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info users user endpoint entity="<not URI of ISUP>" status>disconnected< joining-method>dialled-in< or joining-method>dialled-out< Comments Message flows Mg MGCF ISUP Session is established and joined in a conference NOTIFY CPG 200 OK (NOTIFY) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 350 TP number TP_404_016 Reference 7.5.6.3 TSS reference PSTN-SS/CONF/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/20 AND PICS 6.3.9/1 Test Purpose name Interworking of notification of 'other party disconnected' at the O-MGCF Test Purpose An established conference is already indicated by receipt of an adequate NOTIFY request at the O-MGCF. Ensure that on receipt of a NOTIFY request and the 'entity' attribute of the 'endpoint' element does not contain the ISUP address as received in the To header and the 'status' sub element of the 'endpoint' element is set to dialled-out, an ISUP CPG message is sent the Generic notification indicator is set to 'other party disconnected' ISUP Parameter values CPG: Generic notification other party disconnected SIP Parameter values NOTIFY: To: <ISUP address> Subscription-State: active Event: conference Content-Type: application/conference-info+xml <?xml version="1.0" conference-info users user endpoint entity="<not URI of ISUP>" status>disconnected< or joining-method>dialled-out< Comments Message flows Mg MGCF ISUP Session is established and joined in a conference CPG NOTIFY 200 OK (NOTIFY) Apply post test routine
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.3.5 Message Waiting Indication (MWI)	Void.
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.3.6 Malicious Communication Identification (MCID)	TP number TP_406_001 Reference 7.5.9.1 TSS reference IMS-SS/MCID/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/3 Test Purpose name Receipt of INFO request an IDR is sent Test Purpose Ensure that on receipt of an INFO request containing a 'mcid' XML element and the 'McidRequestIndicator' subelement is set to XML_McidReq, an ISUP IDR message is sent and the MCID request indicators is set to MCID_req as indicated in table 6.3.6-1 ISUP Parameter values IDR: MCID request indicators MCID_req SIP Parameter values INFO: <?xml version="1.0" mcid request> McidRequestIndicator>XML_McidReq</ HoldingIndicator>1</ Comments Message flows Mg MGCF ISUP IAM INVITE 100 Trying IDR INFO 200 OK INFO Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 351 Table 6.3.6-1: Mapping of XML McidRequestIndicator into ISUP MCID request indicator XML_McidReq MCID_req VA_01 0 MCID not requested VA_02 1 MCID requested TP number TP_406_002 Reference 7.5.9.1 TSS reference IMS-SS/MCID/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/3 Test Purpose name Receipt of IRS an INFO request is sent Test Purpose Ensure that on receipt of an IRS message containing a MCID response indicator set to MCID_rsp, an INFO is sent and a MCID XML response element is present. The McidResponseIndicator is set to XML_McidRsp as indicated in table 6.3.6-2 ISUP Parameter values IRS: MCID response indicator MCID_rsp SIP Parameter values INFO: <?xml version="1.0" mcid response> McidResponseIndicator>XML_McidRsp</ Comments Message flows Mg MGCF ISUP IAM INVITE ACM 100 Trying IDR INFO 200 OK INFO IRS INFO 200 OK INFO Apply post test routine Table 6.3.6-2: Mapping of ISUP MCID response indicator into XML McidResponseIndicator MCID_rsp XML_McidRsp VA_01 MCID not included 0 VA_02 MCID included 1 ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 352 TP number TP_406_003 Reference 7.5.9.1.3 TSS reference IMS-SS/MCID/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/3 Test Purpose name Receipt of IRS an INFO request is sent, a Calling party number is interworked Test Purpose Ensure that on receipt of an IRS message containing a 'mcid' response indicator is set to MCID included, an INFO request is sent and a MCID XML response element is present the McidResponseIndicator is set to 1 A Calling party number 'user provided' or 'network provided' is contained in the IRS a XML mcid OrigPartyIdentity element is present in the INFO request and the URI is derived from the address signals of the calling party number. Nature of address indicator: • National (significant) number: add '+' and 'CC' the county code where the SUT is located to the Address signal of the Calling party number and sent in the 'mcid' XML OrigPartyIdentity element. • International number: add '+' to the Address signal of the Calling party number and sent in the 'mcid' XML OrigPartyIdentity element. The Calling party number Address Presentation restriction indicator value APRI_value is mapped into the XML mcid OrigPartyPresentationRestriction is set to XML_orig_restr as indicated in table 6.3.6-3 ISUP Parameter values IRS: MCID response indicator MCID included Calling Party number Address presentation restriction indicator=APRI_value Address signal SIP Parameter values INFO: <?xml version="1.0" mcid response> McidResponseIndicator>1</ OrigPartyIdentity>derived from the Calling Party number Address signal</ OrigPartyPresentationRestriction>XML_orig_restr</ Comments Message flows Mg MGCF ISUP IAM INVITE ACM 180 Ringing IDR INFO 200 OK INFO IRS INFO 200 OK INFO Apply post test routine Table 6.3.6-3: Mapping of ISUP Calling party number APRI into XML OrigPartyPresentationRestriction APRI_value XML_orig_restr VA_01 Presentation restricted true VA_02 Presentation allowed false ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 353 TP number TP_406_004 Reference 7.5.9.1.4 TSS reference IMS-SS/MCID/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/3 Test Purpose name Receipt of IRS an INFO request is sent, an Additional calling party number is interworked Test Purpose Ensure that on receipt of an IRS message containing a 'mcid' response indicator is set to MCID included, an INFO request is sent and a MCID XML response element is present the McidResponseIndicator is set to 1 An Additional calling party number 'user provided' or 'user provided, not verified'' or 'network provided' is contained in the IRS a XML mcid GenericNumber element is present in the INFO request and the URI is derived from the address signals of the Additional calling party number. Nature of address indicator • National (significant) number: add '+' and 'CC' the county code where the SUT is located to the Address signal of the Additional calling party number and sent in the 'mcid' XML GenericNumber element. • International number: add '+' to the Address signal of the Additional calling party number and sent in the 'mcid' XML GenericNumber element. The Additional calling party number Address Presentation restriction indicator value APRI_value is mapped into the XML mcid GenericNumberPresentationRestriction is set to XML_gen_restr as indicated in table 6.3.6-4 ISUP Parameter values IRS: MCID response indicator MCID included Generic number Additional calling Party number Address presentation restriction indicator=APRI_value Address signal SIP Parameter values INFO: <?xml version="1.0" mcid response> McidResponseIndicator>1</ GenericNumber>derived from the Generic number Address signal</ GenericNumberPresentationRestriction>XML_gen_restr</ Comments Message flows Mg MGCF ISUP IAM INVITE ACM 180 Ringing IDR INFO 200 OK INFO IRS INFO 200 OK INFO Apply post test routine Table 6.3.6-4: Mapping of ISUP Additional calling party number APRI into XML GenericNumberPresentationRestriction APRI_value XML_gen_restr VA_01 Presentation restricted true VA_02 Presentation allowed false ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 354 TP number TP_406_005 Reference 7.5.9.2.2 TSS reference IMS-SS/MCID/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/3 Test Purpose name ISUP IDR is mapped into INFO request Test Purpose Ensure that on receipt of an ISUP IDR containing a MCID request indicators indicator set to MCID_req, an INFO request is sent. A XML 'mcid' McidRequestIndicator is included set to XML_McidReq as indicated in table 6.3.6-5 ISUP Parameter values IDR: MCID request indicators MCID_req SIP Parameter values INFO: <?xml version="1.0" mcid request> McidRequestIndicator>XML_McidReq</ HoldingIndicator>1</ Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying INFO IDR 200 OK INFO Apply post test routine Table 6.3.6-5: Mapping of ISUP MCID request indicator into XML McidRequestIndicator MCID_req XML_McidReq VA_01 MCID not requested 0 VA_02 MCID requested 1 TP number TP_406_006 Reference 7.5.9.2.3 TSS reference IMS-SS/MCID/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/3 Test Purpose name INFO request is mapped into ISUP IRS Test Purpose Ensure that on receipt of an INFO request the XML 'mcid' McidResponseIndicator is set to MCID_rsp, an ISUP IRS is sent. The MCID response indicator is set to MCID_rsp as indicated in table 6.3.6-6 ISUP Parameter values IRS: MCID response indicator MCID_rsp SIP Parameter values INFO: <?xml version="1.0" mcid response> McidResponseIndicator>XML_McidRsp</ Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying INFO IDR 200 OK INFO INFO IRS 200 OK INFO Apply post test routine Table 6.3.6-6: Mapping of XML McidResponseIndicator into ISUP MCID response indicator XML_McidRsp MCID_rsp VA_01 0 MCID not included VA_02 1 MCID included ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 355 TP number TP_406_007 Reference 7.5.9.2.3 TSS reference IMS-SS/MCID/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/3 Test Purpose name XML OrigPartyIdentity is mapped into ISUP IRS Calling Party number Test Purpose Ensure that on receipt of an INFO request the XML 'mcid' McidResponseIndicator is set to MCID_rsp, an ISUP IRS is sent. The XML OrigPartyIdentity is mapped into the Calling party: • If the country code of the OrigPartyIdentity URI is equal to the country code where the SUT is located the Nature of address is set to 'National (significant) number', the '+' and the country code is removed from the user part of the XML OrigPartyIdentity URI and send in the Address signals of the Calling party number. • If the country code of the OrigPartyIdentity URI is not equal to the country code where the SUT is located the Nature of address is set to 'International number', the '+' is removed from the user part of the XML OrigPartyIdentity URI and send in the Address signals of the Calling party number. The XML OrigPartyPresentationRestriction value XML_orig_restr is mapped into the Address presentation restriction indicator APRI_value of the Calling party number as indicated in table 6.3.6-7 ISUP Parameter values IRS: MCID response indicator MCID included Calling Party number Address presentation restriction indicator=APRI_value Address signal= derived from the OrigPartyIdentity SIP Parameter values INFO: <?xml version="1.0" mcid response> McidResponseIndicator>1</ OrigPartyIdentity>any valid URI</ OrigPartyPresentationRestriction>XML_orig_restr</ Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying INFO IDR 200 OK INFO INFO IRS 200 OK INFO Apply post test routine Table 6.3.6-7: Mapping of XML OrigPartyPresentationRestriction into ISUP Calling party number APRI XML_orig_restr APRI_value VA_01 true Presentation restricted VA_02 false Presentation allowed ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 356 TP number TP_406_008 Reference 7.5.9.2.3 TSS reference IMS-SS/MCID/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/3 Test Purpose name XML GenericNumber is mapped into ISUP IRS Additional calling Party number Test Purpose Ensure that on receipt of an INFO request the XML 'mcid' McidResponseIndicator is set to MCID_rsp, an ISUP IRS is sent. The XML GenericNumber is mapped into the Additional calling party: • If the country code of the GenericNumber URI is equal to the country code where the SUT is located the Nature of address is set to 'National (significant) number', the '+' and the country code is removed from the user part of the XML GenericNumber URI and send in the Address signals of the Additional calling party number. • If the country code of the GenericNumber URI is not equal to the country code where the SUT is located the Nature of address is set to 'International number', the '+' is removed from the user part of the XML GenericNumber URI and send in the Address signals of the Additional calling party number. The XML GenericNumberPresentationRestriction value XML_gen_restr is mapped into the Address presentation restriction indicator APRI_value of the Additional calling party number as indicated in table 6.3.6-8 ISUP Parameter values IRS: MCID response indicator MCID included Generic number Additional calling Party number Address presentation restriction indicator=APRI_value Address signal SIP Parameter values INFO: <?xml version="1.0" mcid response> McidResponseIndicator>1</ GenericNumber>derived from the Generic number Address signal</ GenericNumberPresentationRestriction>XML_gen_restr</ Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying INFO IDR 200 OK INFO INFO IRS 200 OK INFO Apply post test routine Table 6.3.6-8: Mapping of XML GenericNumberPresentationRestriction into ISUP Additional calling party number APRI XML_gen_restr APRI_value VA_01 true Presentation restricted VA_02 false Presentation allowed ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 357
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.3.7 Closed User Group (CUG)	TP number TP_407_001 Reference 7.5.10.1 table 7.5.10.1.1, table 7.5.10.1.2 TSS reference IMS-SS/CUG/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/23 Test Purpose name Mapping of the SIP XML CUG Element to the ISUP closed usergroup interlock code parameter Test Purpose Ensure that on receipt of an INVITE request containing the Content-Type application/vnd.etsi.cug+xml and the 'cug' XML body, an IAM is sent. The XML 'networkIndicator' is mapped into the ISUP Closed user group interlock code Network Identity indicator and the XML 'cugInterlockBinaryCode' is mapped into the ISUP Closed user group interlock code Binary code indicator ISUP Parameter values IAM: Optional forward call indicator Closed user group call indicator Closed user group interlock code Network Identity mapped from XML networkIndicator Binary code mapped from XML cugInterlockBinaryCode SIP Parameter values INVITE: Content-Type: application/vnd.etsi.cug+xml <?xml version="1.0" cug networkIndicator=any proper value cugInterlockBinaryCode=any proper value cugCommunicationIndicator Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_407_002 Reference 7.5.10.1 table 7.5.10.1.1, table 7.5.10.1.3 TSS reference IMS-SS/CUG/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/23 Test Purpose name Mapping of the SIP XML CUG Element to the ISUP closed user group call indicator included in the optional Forward Call Indicator Parameter Test Purpose Ensure that on receipt of an INVITE request containing the Content-Type application/vnd.etsi.cug+xml and the 'cug' XML body, an IAM is sent. The XML 'cugCommunicationIndicator' is mapped into the ISUP Optional forward call indicator Closed user group call indicator as indicated in table 6.3.7-1 ISUP Parameter values IAM: Optional forward call indicator Closed user group call indicator=CUG_ind Closed user group interlock code Network Identity Binary code SIP Parameter values INVITE: Content-Type: application/vnd.etsi.cug+xml <?xml version="1.0" cug networkIndicator cugInterlockBinaryCode cugCommunicationIndicator=CUG_COM_ind Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 358 Table 6.3.7-1: Mapping of XML cugCommunicationIndicator into ISUP Optional forward call indicator Closed user group call indicator CUG_COM_ind CUG_ind VA_01 00 non-CUG call VA_02 01 spare VA_03 10 closed user group call, outgoing access allowed VA_04 11 closed user group call, outgoing access not allowed TP number TP_407_003 Reference 7.5.10.1 table 7.5.10.1.4 TSS reference IMS-SS/CUG/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/23 Test Purpose name Communication is released if the PSTN/ISDN network does not support CUG, CUG without outgoing access Test Purpose Ensure that on receipt of an INVITE request containing the Content-Type application/vnd.etsi.cug+xml and the 'cug' XML body the cugCommunicationIndicator set to '11', the communication is released with 403 (Forbidden) final response if the PSTN/ISDN network does not support CUG ISUP Parameter values SIP Parameter values INVITE: Content-Type: application/vnd.etsi.cug+xml <?xml version="1.0" cug networkIndicator cugInterlockBinaryCode cugCommunicationIndicator='11' Comments Message flows Mg MGCF ISUP INVITE 403 Forbidden ACK Apply post test routine TP number TP_407_004 Reference 7.5.10.1 table 7.5.10.1.4 TSS reference IMS-SS/CUG/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/23 Test Purpose name Communication is treated as an ordinary call if the PSTN/ISDN network does not support CUG, CUG with outgoing access Test Purpose Ensure that on receipt of an INVITE request containing the Content-Type application/vnd.etsi.cug+xml and the 'cug' XML body the cugCommunicationIndicator set to '10', the communication is treated as an ordinary call if the PSTN/ISDN network does not support CUG. A Closed user group interlock code is not present in the sent IAM ISUP Parameter values SIP Parameter values INVITE: Content-Type: application/vnd.etsi.cug+xml <?xml version="1.0" cug networkIndicator cugInterlockBinaryCode cugCommunicationIndicator='10' Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 359 TP number TP_407_005 Reference 7.5.10.1 table 7.5.10.1.4 TSS reference IMS-SS/CUG/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/23 Test Purpose name Communication is treated as an ordinary call if the PSTN/ISDN network does not support CUG, Non-CUG call Test Purpose Ensure that on receipt of an INVITE request containing the Content-Type application/vnd.etsi.cug+xml and the 'cug' XML body the cugCommunicationIndicator set to '00', the communication is treated as an ordinary call if the PSTN/ISDN network does not support CUG. A Closed user group interlock code is not present in the sent IAM ISUP Parameter values SIP Parameter values INVITE: Content-Type: application/vnd.etsi.cug+xml <?xml version="1.0" cug networkIndicator cugInterlockBinaryCode cugCommunicationIndicator='00' Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_407_006 Reference 7.5.10.2 table 7.5.10.2.2 TSS reference IMS-SS/CUG/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/23 Test Purpose name Mapping of the ISUP closed usergroup interloccode to SIP XML CUG element Test Purpose Ensure that on receipt of an IAM and a Closed user group interlock code parameter is present, an INVITE request is sent. The Network Identity indicator is mapped into the XML networkIndicator element, the Binary code is mapped into the XML cugInterlockBinaryCode ISUP Parameter values IAM: Optional forward call indicator Closed user group call indicator Closed user group interlock code Network Identity=any proper value Binary code=any proper value SIP Parameter values INVITE: Content-Type: application/vnd.etsi.cug+xml <?xml version="1.0" cug networkIndicator= mapped from Network Identity cugInterlockBinaryCode= mapped from Binary code cugCommunicationIndicator Comments Message flows Mg MGCF ISUP IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 360 TP number TP_407_007 Reference 7.5.10.2 table 7.5.10.2.3 TSS reference IMS-SS/CUG/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/23 Test Purpose name Mapping of the ISUP closed usergroup interloccode to SIP XML CUG element Test Purpose Ensure that on receipt of an IAM and an Optional forward call indicator is present set to CUG_ind, an INVITE request is sent. The XML cugCommunicationIndicator is mapped from the ISUP Closed user group call indicator set to CUG_ind as indicated in table 6.3.7-2 ISUP Parameter values IAM: Optional forward call indicator Closed user group call indicator=CUG_ind Closed user group interlock code Network Identity Binary code SIP Parameter values INVITE: Content-Type: application/vnd.etsi.cug+xml <?xml version="1.0" cug networkIndicator cugInterlockBinaryCode cugCommunicationIndicator=CUG_COM_ind Comments Message flows Mg MGCF ISUP IAM INVITE 100 Trying Apply post test routine Table 6.3.7-2: Mapping of ISUP Optional forward call indicator Closed user group call indicator into XML cugCommunicationIndicator CUG_ind CUG_COM_ind VA_01 non-CUG call 00 VA_02 spare 01 VA_03 closed user group call, outgoing access allowed 10 VA_04 closed user group call, outgoing access not allowed 11 TP number TP_407_008 Reference 7.5.10.2, 1.5.2.4.2/Q.735.1 TSS reference IMS-SS/CUG/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/23 AND PICS 6.3.10/1 Test Purpose name Communication is released if the IMS network does not support CUG, CUG without outgoing access Test Purpose Ensure that on receipt of an IAM and the Optional forward call indicator Closed user group call indicator is set to closed user group call, outgoing access not allowed and the IMS network does not support the CUG supplementary service, a REL is sent and the Cause value is set to #29 Facility rejected the diagnostics indicating CUG without access ISUP Parameter values IAM: Optional forward call indicator Closed user group call indicator=C UG call, outgoing access not allowed Closed user group interlock code Network Identity Binary code REL: Cause indicator Cause value=29 Diagnostics=3 SIP Parameter values Comments Message flows Mg MGCF ISUP IAM REL RLC Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 361 TP number TP_407_009 Reference 7.5.10.2, 1.5.2.4.2/Q.735.1 TSS reference IMS-SS/CUG/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/23 AND PICS 6.3.10/1 Test Purpose name Communication is treated as an ordinary call if the IMS network does not support CUG, CUG with outgoing access Test Purpose Ensure that on receipt of an IAM and the Optional forward call indicator Closed user group call indicator is set to closed user group call, outgoing access allowed and the IMS network does not support the CUG supplementary service, the communication is treated as an ordinary call ISUP Parameter values IAM: Optional forward call indicator Closed user group call indicator=C UG call, outgoing access allowed Closed user group interlock code Network Identity Binary code SIP Parameter values Comments Message flows Mg MGCF ISUP IAM INVITE 100 Trying Apply post test routine
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.3.8 CCBS/CCNR	TP number TP_408_001 Reference 7.5.11.1, table 7.5.11.1.1 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Mapping of CCNR possible indication in the ACM Test Purpose Ensure that on receipt of an ACM and a CCNR possible indicator is present set to 'CCNR possible' a 180 Ringing is sent. A Call-Info header is present, the URI is derived from the Called party number, the purpose parameter is set to 'call-completion', the m parameter is set to 'NR' ISUP Parameter values IAM: Called party number Number digits ACM: Called party status Subscriber free CCNR possible indicator CCNR possible SIP Parameter values 180: Call-Info: <sip:Called party number digits>;purpose=call-completion;m=NR Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 362 TP number TP_408_002 Reference 7.5.11.1, table 7.5.11.1.1 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Mapping of CCNR possible indication in the CPG Test Purpose Ensure that on receipt of an CPG Event indicator set to 'Alerting' and a CCNR possible indicator is present set to 'CCNR possible' a 180 Ringing is sent. A Call-Info header is present, the URI is derived from the Called party number, the purpose parameter is set to 'call-completion', the m parameter is set to 'NR' ISUP Parameter values IAM: Called party number Number digits ACM: Called party status No indication CPG: Event indicator Alerting CCNR possible indicator CCNR possible SIP Parameter values 180: Call-Info: <sip:Called party number digits>;purpose=call-completion;m=NR Comments Message flows Mg MGCF ISUP INVITE IAM ACM(no indication) 180 Ringing CPG(Alerting) Apply post test routine TP number TP_408_003 Reference 7.5.11.1, table 7.5.11.1.1 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Mapping of CCBS possible indication in the REL Test Purpose Ensure that on receipt of an REL message Cause #17 and a CCBS possible indicator in the Diagnostic field is set to 'CCBS possible' a 486 Busy here is sent. A Call-Info header is present, the URI is derived from the Called party number, the purpose parameter is set to 'call-completion', the m parameter is set to 'BS' ISUP Parameter values IAM: Called party number Number digits REL: Cause indicator Cause = 17 Diagnostic CCBS possible SIP Parameter values 486: Call-Info: <sip:Called party number digits>;purpose=call-completion;m=BS Comments Message flows Mg MGCF ISUP INVITE IAM 486 Busy here REL ACK RLC Apply post test routine TP number TP_408_004 Reference 7.5.11.1, table 7.5.11.1.1 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Mapping of m parameter in the INVITE request URI into CCSS parameter in the IAM Test Purpose Ensure that on receipt of an INVITE request and a m parameter set to 'BS' or 'NR' an IAM is sent and the CCSS call indicator parameter is present and the value is set to 'CCSS call' ISUP Parameter values IAM: CCSS call indicator CCSS call SIP Parameter values INVITE: <Request URI>;m=NR or ;m=BS Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 363 TP number TP_408_005 Reference 7.5.11.1, table 7.5.11.1.1 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Mapping of Call-Info header in the INVITE into CCSS parameter in the IAM Test Purpose Ensure that on receipt of an INVITE request and a Call-Info header is present the purpose parameter is set to 'call-completion' and the m parameter set to 'BS' or 'NR' an IAM is sent and the CCSS call indicator parameter is present and the value is set to 'CCSS call' ISUP Parameter values IAM: CCSS call indicator CCSS call SIP Parameter values INVITE: <Request URI> Call-Info: <sip:Called party number digits>;purpose=call-completion; m=BS or NR Comments Message flows Mg MGCF ISUP INVITE IAM 100 Trying Apply post test routine TP number TP_408_006 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Invocation of CCBS in the I-MGCF Test Purpose Ensure that on receipt of a SUBSCRIBE request the Request URI contains the m parameter set to 'BS' and Event header field contains the value 'call-completion', a SCCP UDT or XUDT is sent containing a TC-Begin REQUEST invoke Data field. The TC-Begin REQUEST invoke CalledPartyNumber is derived from the To header, the CallingPartyNumber is derived from the From header and the RetainSupported is set to 'TRUE' TCAP Parameter values TC Begin CCBS REQUEST invoke CalledPartyNumber derived from the To header CallingPartyNumber derived from the P-Asserted-Identity header RetainSupported TRUE SIP Parameter values SUBSCRIBE: <Request URI>, m=BS Event: call-completion Comments Message flows Mg MGCF SCCP SUBSCRIBE (X)UDT (TC-Begin) 202 Accepted Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 364 TP number TP_408_007 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Invocation of CCBS in the I-MGCF Test Purpose Ensure that on receipt of a SUBSCRIBE and the Event header field contains the value 'call-completion' and a Call-Info header with purpose parameter ser to call-completion and m parameter set to 'BS', a SCCP UDT or XUDT is sent containing a TC-Begin REQUEST invoke Data field. The TC-Begin REQUEST invoke CalledPartyNumber is derived from the To header, the CallingPartyNumber is derived from the From header and the RetainSupported is set to 'TRUE' TCAP Parameter values TC Begin CCBS REQUEST invoke CalledPartyNumber derived from the To header CallingPartyNumber derived from the P-Asserted-Identity header RetainSupported TRUE SIP Parameter values SUBSCRIBE: <Request URI> Event: call-completion Call-Info: <sip:Calling party number digits>;purpose=call-completion; m=BS Comments Message flows Mg MGCF SCCP SUBSCRIBE (X)UDT (TC-Begin) 202 Accepted Apply post test routine TP number TP_408_008 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Invocation of CCNR in the I-MGCF Test Purpose Ensure that on receipt of a SUBSCRIBE request the Request URI contains the m parameter set to 'NR' and Event header field contains the value 'call-completion', a SCCP UDT or XUDT is sent containing a TC-Begin REQUEST invoke Data field. The TC-Begin REQUEST invoke CalledPartyNumber is derived from the To header, the CallingPartyNumber is derived from the From header and the RetainSupported is set to 'TRUE' TCAP Parameter values TC Begin CCBS REQUEST invoke CalledPartyNumber derived from the To header CallingPartyNumber derived from the P-Asserted-Identity header RetainSupported TRUE SIP Parameter values SUBSCRIBE: <Request URI>, m=NR Event: call-completion Comments Message flows Mg MGCF SCCP SUBSCRIBE (X)UDT (TC-Begin) 202 Accepted Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 365 TP number TP_408_009 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Invocation of CCNR in the I-MGCF Test Purpose Ensure that on receipt of a SUBSCRIBE and the Event header field contains the value 'call-completion' and a Call-Info header with purpose parameter ser to call-completion and m parameter set to 'NR', a SCCP UDT or XUDT is sent containing a TC-Begin REQUEST invoke Data field. The TC-Begin REQUEST invoke CalledPartyNumber is derived from the To header, the CallingPartyNumber is derived from the From header and the RetainSupported is set to 'TRUE' TCAP Parameter values TC Begin CCBS REQUEST invoke CalledPartyNumber derived from the To header CallingPartyNumber derived from the P-Asserted-Identity header RetainSupported TRUE SIP Parameter values SUBSCRIBE: <Request URI> Event: call-completion Call-Info: <sip:Calling party number digits>;purpose=call-completion; m=BS Comments Message flows Mg MGCF SCCP SUBSCRIBE (X)UDT (TC-Begin) 202 Accepted Apply post test routine TP number TP_408_010 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name PUBLISH with m=BS and PIDF basic status "closed" is interworked into CCBS SUSPEND Test Purpose Ensure that on receipt of a PUBLISH request and a m parameter is present in the Request line is set to 'BS' the Event header field contains the value 'presence', and a PIDF XML MIME body is present the presence status set to 'closed', a SCCP UDT or XUDT is sent containing a TC-Cont CCBS SUSPEND Data field TCAP Parameter values TC-Cont: CCBS SUSPEND SIP Parameter values PUBLISH: <Request URI>; m=BS Event: presence Content-Type: application/pidf+xml <?xml version="1.0" encoding="UTF-8"?> <presence <status> <basic>closed</basic> Comments Note the XML semantic is schematically the alias is not considered Message flows Mg MGCF SCCP Invoke a successful CCBS request and remote user is now free PUBLISH (X)UDT (TC-Cont) 200 OK (PUBLISH) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 366 TP number TP_408_011 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name PUBLISH with m=BS and PIDF basic status "closed" is interworked into CCBS SUSPEND Test Purpose Ensure that on receipt of a PUBLISH request the Event header field contains the value 'presence' and a Call-Info header with purpose parameter ser to call-completion and m parameter set to 'BS' and a PIDF XML MIME body is present the presence status set to 'closed', a SCCP UDT or XUDT is sent containing a TC-Cont CCBS SUSPEND Data field TCAP Parameter values TC-Cont: CCBS SUSPEND SIP Parameter values PUBLISH: <Request URI> Event: presence Call-Info: <sip:Calling party number digits>;purpose=call-completion; m=BS Content-Type: application/pidf+xml <?xml version="1.0" encoding="UTF-8"?> <presence <status> <basic>closed</basic> Comments Note the XML semantic is schematically the alias is not considered Message flows Mg MGCF SCCP Invoke a successful CCBS request and remote user is now free PUBLISH (X)UDT (TC-Cont) 200 OK (PUBLISH) Apply post test routine TP number TP_408_012 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name PUBLISH with m=BS and PIDF basic status "open" is interworked into CCBS RESUME Test Purpose Ensure that on receipt of a PUBLISH request and a m parameter is present in the Request line is set to 'BS' the Event header field contains the value 'presence' and a PIDF XML MIME body is present the presence status set to 'open', a SCCP UDT or XUDT is sent containing a TC-Cont CCBS RESUME Data field TCAP Parameter values TC-Cont: CCBS RESUME SIP Parameter values PUBLISH: <Request URI>; m=BS Event: presence Content-Type: application/pidf+xml <?xml version="1.0" encoding="UTF-8"?> <presence <status> <basic>open</basic> Comments Note the XML semantic is schematically the alias is not considered Message flows Mg MGCF SCCP Successful CCBS request and remote user is free originating user suspended PUBLISH (X)UDT (TC-Cont) 200 OK (PUBLISH) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 367 TP number TP_408_013 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name PUBLISH with m=BS and PIDF basic status "open" is interworked into CCBS RESUME Test Purpose Ensure that on receipt of a PUBLISH request and the Event header field contains the value 'presence', a Call-Info header with purpose parameter ser to call-completion and m parameter set to 'BS' and a PIDF XML MIME body is present the presence status set to 'open', a SCCP UDT or XUDT is sent containing a TC-Cont CCBS RESUME Data field TCAP Parameter values TC-Cont: CCBS RESUME SIP Parameter values PUBLISH: <Request URI> Event: presence Call-Info: <sip:Calling party number digits>;purpose=call-completion; m=BS Content-Type: application/pidf+xml <?xml version="1.0" encoding="UTF-8"?> <presence <status> <basic>open</basic> Comments Note the XML semantic is schematically the alias is not considered Message flows Mg MGCF SCCP Successful CCBS request and remote user is free originating user suspended PUBLISH (X)UDT (TC-Cont) 200 OK (PUBLISH) Apply post test routine TP number TP_408_014 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name PUBLISH with m=NR and PIDF basic status "closed" is interworked into CCBS SUSPEND Test Purpose Ensure that on receipt of a PUBLISH request and a m parameter is present in the Request line is set to 'NR' the Event header field contains the value 'presence' and a PIDF XML MIME body is present the presence status set to 'closed', a SCCP UDT or XUDT is sent containing a TC-Cont CCBS SUSPEND Data field TCAP Parameter values TC-Cont: CCBS SUSPEND SIP Parameter values PUBLISH: <Request URI>; m=NR Event: presence Content-Type: application/pidf+xml <?xml version="1.0" encoding="UTF-8"?> <presence <status> <basic>closed</basic> Comments Note the XML semantic is schematically the alias is not considered Message flows Mg MGCF SCCP Invoke a successful CCNR request and remote user is now free PUBLISH (X)UDT (TC-Cont) 200 OK (PUBLISH) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 368 TP number TP_408_015 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name PUBLISH with m=NR and PIDF basic status "closed" is interworked into CCBS SUSPEND Test Purpose Ensure that on receipt of a PUBLISH request the Event header field contains the value 'presence', a Call-Info header with purpose parameter ser to call-completion and m parameter set to 'NR' and a PIDF XML MIME body is present the presence status set to 'closed', a SCCP UDT or XUDT is sent containing a TC-Cont CCBS SUSPEND Data field TCAP Parameter values TC-Cont: CCBS SUSPEND SIP Parameter values PUBLISH: <Request URI> Event: presence Call-Info: <sip:Calling party number digits>;purpose=call-completion; m=BS Content-Type: application/pidf+xml <?xml version="1.0" encoding="UTF-8"?> <presence <status> <basic>closed</basic> Comments Note the XML semantic is schematically the alias is not considered Message flows Mg MGCF SCCP Invoke a successful CCNR request and remote user is now free PUBLISH (X)UDT (TC-Cont) 200 OK (PUBLISH) Apply post test routine TP number TP_408_016 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name PUBLISH with m=NR and PIDF basic status "open" is interworked into CCBS RESUME Test Purpose Ensure that on receipt of a PUBLISH request and a m parameter is present in the Request line is set to 'NR' the Event header field contains the value 'presence' and a PIDF XML MIME body is present the presence status set to 'open', a SCCP UDT or XUDT is sent containing a TC-Cont CCBS RESUME Data field TCAP Parameter values TC-Cont: CCBS RESUME SIP Parameter values PUBLISH: <Request URI>; m=NR Event: presence Content-Type: application/pidf+xml <?xml version="1.0" encoding="UTF-8"?> <presence <status> <basic>open</basic> Comments Note the XML semantic is schematically the alias is not considered Message flows Mg MGCF SCCP Successful CCNR request and remote user is free originating user suspended PUBLISH (X)UDT (TC-Cont) 200 OK (PUBLISH) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 369 TP number TP_408_017 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name PUBLISH with m=NR and PIDF basic status "open" is interworked into CCBS RESUME Test Purpose Ensure that on receipt of a PUBLISH request and Event header field contains the value 'presence' a Call-Info header with purpose parameter ser to call-completion and m parameter set to 'NR' and a PIDF XML MIME body is present the presence status set to 'open', a SCCP UDT or XUDT is sent containing a TC-Cont CCBS RESUME Data field TCAP Parameter values TC-Cont: CCBS RESUME SIP Parameter values PUBLISH: <Request URI> Event: presence Call-Info: <sip:Calling party number digits>;purpose=call-completion; m=BS Content-Type: application/pidf+xml <?xml version="1.0" encoding="UTF-8"?> <presence <status> <basic>open</basic> Comments Note the XML semantic is schematically the alias is not considered Message flows Mg MGCF SCCP Successful CCNR request and remote user is free originating user suspended PUBLISH (X)UDT (TC-Cont) 200 OK (PUBLISH) Apply post test routine TP number TP_408_018 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name SUBSCRIBE with m=BS and Expires header set to '0' is interworked into CCBS CANCEL Test Purpose Ensure that on receipt of a SUBSCRIBE request and a m parameter is present in the Request line is set to 'BS' and Event header field contains the value 'call-completion' and a Call-Info header with purpose parameter ser to call-completion and m parameter set to 'BS' and a Expires header set to '0', a SCCP UDT or XUDT is sent containing a TC-End CCBS CANCEL Data field TCAP Parameter values TC-End: CCBS CANCEL SIP Parameter values SUBSCRIBE: <Request URI>; m=BS Event:call-completion Call-Info: <sip:Calling party number digits>;purpose=call-completion; m=BS Expires: 0 Comments Message flows Mg MGCF SCCP A CCBS is successfully invoked SUBSCRIBE (X)UDT (TC-End) 202 Accepted Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 370 TP number TP_408_019 Reference 7.5.11.1, table 7.5.11.1.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name SUBSCRIBE with m=NR and Expires header set to '0' is interworked into CCBS CANCEL Test Purpose Ensure that on receipt of a SUBSCRIBE request and a m parameter is present in the Request line is set to 'NR' and Event header field contains the value 'call-completion' and a Call-Info header with purpose parameter ser to call-completion and m parameter set to 'BS' and a Expires header set to '0', a SCCP UDT or XUDT is sent containing a TC-End CCBS CANCEL Data field TCAP Parameter values TC-End: CCBS CANCEL SIP Parameter values SUBSCRIBE: <Request URI>; m=NR Event:call-completion Call-Info: <sip:Calling party number digits>;purpose=call-completion; m=NR Expires: 0 Comments Message flows Mg MGCF SCCP A CCNR is successfully invoked SUBSCRIBE (X)UDT (TC-End) 202 Accepted Apply post test routine TP number TP_408_020 Reference 7.5.11.1, table 7.5.11.1.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name TC-Cont CCBS REQUEST (return result) is interworked into NOTIFY cc-service-retention present Test Purpose Ensure that on receipt of a UDT or XUDT containing a TC-Cont CCBS REQUEST (return result) Data field and the RetainSupported element is set to TRUE, a NOTIFY request is sent and the cc-state body is set to 'queued' the cc-service-retention body is set to 'true' TCAP Parameter values TC-Cont: CCBS REQUEST (return result) RetainSupported=TRUE SIP Parameter values NOTIFY: Event: call-completion Content-Type: application/call-completion cc-state: queued cc-service-retention: true Comments Message flows Mg MGCF SCCP SUBSCRIBE (X)UDT (TC-Begin) 202 Accepted NOTIFY (X)UDT (TC-Cont) 200 OK (NOTIFY) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 371 TP number TP_408_021 Reference 7.5.11.1, table 7.5.11.1.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name TC-Cont CCBS REQUEST (return result) is interworked into NOTIFY cc-service-retention not present Test Purpose Ensure that on receipt of a UDT or XUDT containing a TC-Cont CCBS REQUEST (return result) Data field and the RetainSupported element is set to FALSE, a NOTIFY request is sent and the cc-state body is set to 'queued' a cc-service-retention body is not present TCAP Parameter values TC-Cont: CCBS REQUEST (return result) RetainSupported=FALSE SIP Parameter values NOTIFY: Event: call-completion Content-Type: application/call-completion cc-state: queued Comments Message flows Mg MGCF SCCP SUBSCRIBE (X)UDT (TC-Begin) 202 Accepted NOTIFY (X)UDT (TC-Cont) 200 OK (NOTIFY) Apply post test routine TP number TP_408_022 Reference 7.5.11.1, table 7.5.11.1.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name CCBS Return error TC-End ShortTermDenial received, 480 Temporarily Unavailable response to SUBCRIBE Test Purpose Ensure that on receipt of a UDT or XUDT containing a TC-End CCBS REQUEST (Return error) component in the Data field set to 'ShortTermDenial', a 480 Temporarily Unavailable final response to the SUBCRIBE CCBS request is sent TCAP Parameter values TC Begin CCBS REQUEST invoke TC-End CCBS REQUEST (Return error) ShortTermDenial SIP Parameter values SUBSCRIBE: <Request URI>, m=BS Event: call-completion Comments Message flows Mg MGCF SCCP SUBCRIBE (X)UDT (TC-Begin) 480 Temporarily Unavailable (X)UDT (TC-End) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 372 TP number TP_408_023 Reference 7.5.11.1, table 7.5.11.1.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name CCBS Return error TC-End LongTermDenial received, 403 Forbidden unavailable response to SUBCRIBE Test Purpose Ensure that on receipt of a UDT or XUDT containing a TC-End CCBS REQUEST (Return error) component in the Data field set to 'LongTermDenial', a 403 Forbidden final response to the SUBCRIBE CCBS request is sent TCAP Parameter values TC Begin CCBS REQUEST invoke TC-End CCBS REQUEST (Return error) LongTermDenial SIP Parameter values SUBSCRIBE: <Request URI>, m=BS Event: call-completion Comments Message flows Mg MGCF SCCP SUBSCRIBE (X)UDT (TC-Begin) 403 Forbidden (X)UDT (TC-End) Apply post test routine TP number TP_408_024 Reference 7.5.11.1, table 7.5.11.1.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name CCNR Return error TC-End ShortTermDenial received, 480 Temporarily Unavailable response to SUBCRIBE Test Purpose Ensure that on receipt of a UDT or XUDT containing a TC-End CCNR REQUEST (Return error) component in the Data field set to 'ShortTermDenial', a 480 Temporarily Unavailable final response to the SUBCRIBE CCNR request is sent TCAP Parameter values TC Begin CCNR REQUEST invoke TC-End CCNR REQUEST (Return error) ShortTermDenial SIP Parameter values SUBSCRIBE: <Request URI>, m=NR Event: call-completion Comments Message flows Mg MGCF SCCP SUBCRIBE (X)UDT (TC-Begin) 480 Temporarily Unavailable (X)UDT (TC-End) Apply post test routine TP number TP_408_025 Reference 7.5.11.1, table 7.5.11.1.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name CCNR Return error TC-End LongTermDenial received, 403 Forbidden unavailable response to SUBCRIBE Test Purpose Ensure that on receipt of a UDT or XUDT containing a TC-End CCNR REQUEST (Return error) component in the Data field set to 'LongTermDenial', a 403 Forbidden final response to the SUBCRIBE CCNR request is sent TCAP Parameter values TC Begin CCNR REQUEST invoke TC-End CCNR REQUEST (Return error) LongTermDenial SIP Parameter values SUBSCRIBE: <Request URI>, m=NR Event: call-completion Comments Message flows Mg MGCF SCCP SUBSCRIBE (X)UDT (TC-Begin) 403 Forbidden (X)UDT (TC-End) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 373 TP number TP_408_026 Reference 7.5.11.1, table 7.5.11.1.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name TC-End CCBS CANCEL received after CCBS was successfully invoked Test Purpose Ensure that on receipt of an UDT or XUDT containing a TC-End CCBS CANCEL after a CCBS was successfully invoked, a NOTIFY request is sent containing a m parameter set to 'BS' in the Request line and a Subscription-State header set to 'terminated ' and the subexp-params reason set to 'noresource' TCAP Parameter values TC-End CCBS CANCEL SIP Parameter values NOTIFY : <Request URI> Event:call-completion Subscription-State: terminated; reason=noresource Comments Message flows Mg MGCF SCCP CCBS request successfully invoked NOTIFY (X)UDT (TC-End) 200 OK NOTIFY Apply post test routine TP number TP_408_027 Reference 7.5.11.1, table 7.5.11.1.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name TC-End CCBS CANCEL received after CCNR was successfully invoked Test Purpose Ensure that on receipt of an UDT or XUDT containing a TC-End CCBS CANCEL after a CCNR was successfully invoked, a NOTIFY request is sent containing a m parameter set to 'NR' in the Request line and a Subscription-State header set to 'terminated ' and the subexp-params reason set to 'noresource' TCAP Parameter values TC-End CCBS CANCEL SIP Parameter values NOTIFY : <Request URI> Event:call-completion Subscription-State: terminated; reason=noresource Comments Message flows Mg MGCF SCCP CCNR request successfully invoked NOTIFY (X)UDT (TC-End) 200 OK NOTIFY Apply post test routine TP number TP_408_028 Reference 7.5.11.1, table 7.5.11.1.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Interworking of Remote user free indication at the I-MGCF Test Purpose Ensure that on receipt of a UDT or XUDT containing a TC-Cont REMOTE USER FREE invoke component in the Data field, a NOTIFY request is sent and a cc-state body is present set to 'ready' TCAP Parameter values TC-Cont CCBS REMOTE USER FREE SIP Parameter values NOTIFY: Event: call-completion Content-Type: application/call-completion cc-state: ready Comments Message flows Mg MGCF SCCP CCNR request successfully invoked NOTIFY (X)UDT (TC-Cont) 200 OK (NOTIFY) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 374 TP number TP_408_029 Reference 7.5.11.2, table 7.5.11.2.1 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Mapping of CCNR possible indication in a 180 into the CCNR possible indicator in the ACM Test Purpose Ensure that on receipt of a 180 Ringing provisional response and a Call-Info header is present set to the URI of the terminating user and a purpose parameter set to 'call-completion' and m parameter ser to 'NR', an ACM is sent and a CCNR possible indicator Parameter is present set to 'CCNR possible' ISUP Parameter values IAM: Called party number Number digits ACM: Called party status Subscriber free CCNR possible indicator CCNR possible SIP Parameter values 180: Call-Info: <sip:Called party number digits>;purpose=call-completion Comments Message flows ISUP MGCF Mg IAM INVITE ACM 180 Ringing Apply post test routine TP number TP_408_030 Reference 7.5.11.2, table 7.5.11.2.1 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Mapping of CCNR possible indication in a 180 into the CCNR possible indicator in the CPG Test Purpose Ensure that on receipt of a 180 Ringing provisional response and a Call-Info header is present set to the URI of the terminating user and a purpose parameter set to 'call-completion' and m parameter ser to 'NR', a CPG is sent if an ACM was sent before and a CCNR possible indicator Parameter is present set to 'CCNR possible' ISUP Parameter values IAM: Called party number Number digits ACM: Called party status No indication CPG: Event indication Alerting CCNR possible indicator CCNR possible SIP Parameter values 180: Call-Info: <sip:Called party number digits>;purpose=call-completion Comments Message flows ISUP MGCF Mg IAM Start Ti/w2 ACM(no indication) Timeout Ti/w2 INVITE CPG(Alerting) 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 375 TP number TP_408_031 Reference 7.5.11.2, table 7.5.11.2.1 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name 486 with Call-Info header is mapped into REL cause 17 and CCBS possible Test Purpose Ensure that on receipt of a 486 Busy Here and a Call-Info header is present set to the URI of the terminating user and a purpose parameter set to 'call-completion' and m parameter ser to 'BS', a REL message is sent and the Cause value is set to 17 or 34 the Diagnostics is set to 'CCBS possible' ISUP Parameter values REL: Cause indicator Cause=17 or 34 Diagnostics= CCBS possible SIP Parameter values 486: Call-Info: <sip:Called party number digits>;purpose=call-completion Comments Message flows ISUP MGCF Mg IAM INVITE REL 486 Busy Here RLC ACK Apply post test routine TP number TP_408_032 Reference 7.5.11.2, table 7.5.11.2.1 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name CCSS call indicator in IAM is mapped into the m parameter in the Request line in the sent INVITE Test Purpose Ensure that on receipt of an IAM and a CCSS call indicator parameter is present set to 'CCSS call', an INVITE request is sent and the Request line contains a m parameter set to 'NR' or 'BS' ISUP Parameter values IAM: CCSS call indicator CCSS call SIP Parameter values INVITE: <Request URI>;m=NR or ;m=BS Call-Info: <sip:Called party number digits>;purpose=call-completion; m=BS or NR Comments Message flows ISUP MGCF Mg IAM INVITE 100 Trying Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 376 TP number TP_408_033 Reference 7.5.11.2, table 7.5.11.2.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name TC-Begin CCBS REQUEST (invoke) is mapped into SUBCRIBE request invokes CCBS Test Purpose Ensure that on receipt of a UDT or XUDT containing a TC-Begin CCBS REQUEST (invoke) component, a SUBSCRIBE request is sent and the From and the P-Asserted- Identity header are derived from the CCBS REQUEST CallingPartyNumber the To header is derived from the CCBS REQUEST CalledPartyNumber the Event header field is set to 'call-completion' the Request line contains the m parameter set to 'BS' TCAP Parameter values TC-Begin CCBS REQUEST invoke CalledPartyNumber CallingPartyNumber retainSupported TRUE SIP Parameter values SUBSCRIBE: <Request URI>, m=BS From: <derived from the CCBS REQUEST CallingPartyNumber > To: <derived from the CCBS REQUEST CalledPartyNumber > P-Asserted-Identity: <derived from the CCBS REQUEST CallingPartyNumber > Event: call-completion Expires: <any value> Comments Message flows SCCP MGCF Mg (X)UDT(TC-Begin) SUBSCRIBE 202 Accepted Apply post test routine TP number TP_408_034 Reference 7.5.11.2, table 7.5.11.2.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name TC-Begin CCNR REQUEST (invoke) is mapped into SUBCRIBE request invokes CCNR Test Purpose Ensure that on receipt of a UDT or XUDT containing a TC-Begin CCNR REQUEST (invoke) component, a SUBSCRIBE request is sent and the From and the P-Asserted- Identity header are derived from the CCNR REQUEST CallingPartyNumber the To header is derived from the CCNR REQUEST CalledPartyNumber the Event header field is set to 'call-completion' the Request line contains the m parameter set to 'NR' TCAP Parameter values TC-Begin CCNR REQUEST invoke CalledPartyNumber CallingPartyNumber retainSupported TRUE SIP Parameter values SUBSCRIBE: <Request URI>, m=NR From: <derived from the CCNR REQUEST CallingPartyNumber > To: <derived from the CCNR REQUEST CalledPartyNumber > P-Asserted-Identity: <derived from the CCBS REQUEST CallingPartyNumber > Event: call-completion Expires: <any value> Comments Message flows SCCP MGCF Mg (X)UDT(TC-Begin) SUBSCRIBE 202 Accepted Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 377 TP number TP_408_035 Reference 7.5.11.2, table 7.5.11.2.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name TC-Cont CCBS SUSPEND is interworked into PUBLISH with m=BS and PIDF basic status "closed" Test Purpose CCBS or CCNR is invoked and the remote user is free. Ensure that on receipt of a TC-Cont CCBS SUSPEND invoke component, a PUBLISH request is sent containing the m parameter in the Request URI set to 'BS' or 'NR' the Event header set to 'presence' and a PIDF XML MIME body is present the presence status set to 'closed' TCAP Parameter values TC-Cont CCBS SUSPEND SIP Parameter values PUBLISH: <Request URI>; m=BS or ;m=NR Event: presence Content-Type: application/pidf+xml <?xml version="1.0" encoding="UTF-8"?> <presence <status> <basic>closed</basic> Comments Note the XML semantic is schematically the alias is not considered Message flows SCCP MGCF Mg Invoke a successful CCBS/CCNR request and remote user is now free (X)UDT(TC-Cont) PUBLISH 200 OK (PUBLISH) Apply post test routine TP number TP_408_036 Reference 7.5.11.2, table 7.5.11.2.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name TC-Cont CCBS RESUME is interworked into PUBLISH with m=NR and PIDF basic status "open" Test Purpose CCBS or CCNR is invoked and the remote user is free the originating user is suspended. Ensure that on receipt of a TC-Cont CCBS SUSPEND invoke component, a PUBLISH request is sent containing the m parameter in the Request URI set to 'BS' or 'NR' the Event header set to 'presence' and a PIDF XML MIME body is present the presence status set to 'open' TCAP Parameter values TC-Cont CCBS RESUME SIP Parameter values PUBLISH: <Request URI>;m='BS' or ;m=NR Event: presence Content-Type: application/pidf+xml <?xml version="1.0" encoding="UTF-8"?> <presence <status> <basic>open</basic> Comments Note the XML semantic is schematically the alias is not considered Message flows SCCP MGCF Mg Successful CCBS/CCNR request and originating user suspended (X)UDT(TC-Cont) PUBLISH 200 OK (PUBLISH) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 378 TP number TP_408_037 Reference 7.5.11.2, table 7.5.11.2.2 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name TC-End CCBS CANCEL is interworked into SUBSCRIBE with m=BS or NR and Expires header set to '0' Test Purpose A CCBS or CCNR is successfully invoked. Ensure that on receipt of a UDT or XUDT containing a TC-End CCBS CANCEL Data field, a SUBSCRIBE request is sent and a m parameter is present in the Request URI set to 'BS' or 'NR the Event header field is set to 'call-completion' and the Expires header is set to '0' TCAP Parameter values TC-End: CCBS CANCEL SIP Parameter values SUBSCRIBE: <Request URI>; m=BS or ;m='NR' Event:call-completion Expires: 0 Comments Message flows SCCP MGCF Mg A CCBS is successfully invoked (X)UDT (TC-End) SUBSCRIBE 202 Accepted Apply post test routine TP number TP_408_038 Reference 7.5.11.2, table 7.5.11.2.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name A NOTIFY cc-state 'queued' and cc-service-retention 'true' is mapped into a TC-Cont CCBS REQUEST (return result) retain supported Test Purpose Ensure that on receipt of a NOTIFY request the Event header field is set to 'call-completion' the cc-state body is set to 'queued' and the cc-service-retention body is set to 'true', a TC-Cont is sent and the CCBS REQUEST (return result) component is present the RetainSupported element is set to 'TRUE' TCAP Parameter values TC-Cont: CCBS REQUEST (return result) RetainSupported=TRUE SIP Parameter values NOTIFY: Event: call-completion Content-Type: application/call-completion cc-state: queued cc-service-retention: true Comments Message flows SCCP MGCF Mg CCBS request already invoked (X)UDT (TC-Cont) NOTIFY 200 OK (NOTIFY) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 379 TP number TP_408_039 Reference 7.5.11.2, table 7.5.11.2.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name A NOTIFY cc-state 'queued' and no cc-service-retention body present is mapped into a TC-Cont CCBS REQUEST (return result) retain not supported Test Purpose Ensure that on receipt of a NOTIFY request the Event header field is set to 'call-completion' the cc-state body is set to 'queued' and the cc-service-retention body is not present, a TC-Cont is sent and the CCBS REQUEST (return result) component is present the RetainSupported element is set to 'FALSE' TCAP Parameter values TC-Cont: CCBS REQUEST (return result) RetainSupported=FALSE SIP Parameter values NOTIFY: Event: call-completion Content-Type: application/call-completion cc-state: queued Comments Message flows SCCP MGCF Mg CCBS request already invoked (X)UDT (TC-Cont) NOTIFY 200 OK (NOTIFY) Apply post test routine TP number TP_408_040 Reference 7.5.11.2, table 7.5.11.2.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name A NOTIFY cc-state 'queued' and cc-service-retention 'true' is mapped into a TC-Cont CCNR REQUEST (return result) retain supported Test Purpose Ensure that on receipt of a NOTIFY request the Event header field is set to 'call-completion' the cc-state body is set to 'queued' and the cc-service-retention body is set to 'true', a TC-Cont is sent and the CCNR REQUEST (return result) component is present the RetainSupported element is set to 'TRUE' TCAP Parameter values TC-Cont: CCNR REQUEST (return result) RetainSupported=TRUE SIP Parameter values NOTIFY: Event: call-completion Content-Type: application/call-completion cc-state: queued cc-service-retention: true Comments Message flows SCCP MGCF Mg CCNR request already invoked (X)UDT (TC-Cont) NOTIFY 200 OK (NOTIFY) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 380 TP number TP_408_041 Reference 7.5.11.2, table 7.5.11.2.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name A NOTIFY cc-state 'queued' and cc-service-retention 'true' is mapped into a TC-Cont CCNR REQUEST (return result) retain not supported Test Purpose Ensure that on receipt of a NOTIFY request the Event header field is set to 'call-completion' the cc-state body is set to 'queued' and the cc-service-retention body is not present, a TC-Cont is sent and the CCNR REQUEST (return result) component is present the RetainSupported element is set to 'FALSE' TCAP Parameter values TC-Cont: CCNR REQUEST (return result) RetainSupported=FALSE SIP Parameter values NOTIFY: Event: call-completion Content-Type: application/call-completion cc-state: queued Comments Message flows SCCP MGCF Mg CCNR request already invoked (X)UDT (TC-Cont) NOTIFY 200 OK (NOTIFY) Apply post test routine TP number TP_408_042 Reference 7.5.11.2, table 7.5.11.2.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name CCBS request unsuccessful 480 Temporarily Unavailable is received Test Purpose Ensure that on receipt of a 480 Temporarily Unavailable final response upon CCBS was requested, a TC-End CCBS REQUEST (Return error) component containing the ShortTermDenial Element is sent TCAP Parameter values TC-End CCBS REQUEST (Return error) ShortTermDenial SIP Parameter values SUBSCRIBE: <Request URI>, m=BS Event: call-completion Comments Message flows SCCP MGCF Mg (X)UDT (TC-Begin) SUBCRIBE (X)UDT (TC-End) 480 Temporarily Unavailable Apply post test routine TP number TP_408_043 Reference 7.5.11.2, table 7.5.11.2.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name CCNR request unsuccessful 480 Temporarily Unavailable is received Test Purpose Ensure that on receipt of a 480 Temporarily Unavailable final response upon CCNR was requested, a TC-End CCNR REQUEST (Return error) component containing the ShortTermDenial Element is sent TCAP Parameter values TC-End CCNR REQUEST (Return error) ShortTermDenial SIP Parameter values SUBSCRIBE: <Request URI>, m=NR Event: call-completion Comments Message flows SCCP MGCF Mg (X)UDT (TC-Begin) SUBCRIBE (X)UDT (TC-End) 480 Temporarily Unavailable Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 381 TP number TP_408_044 Reference 7.5.11.2, table 7.5.11.2.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name CCBS request unsuccessful 403 Forbidden is received Test Purpose Ensure that on receipt of a 403 Forbidden final response upon CCBS was requested, a TC-End CCBS REQUEST (Return error) component containing the LongTermDenial Element is sent TCAP Parameter values TC-End CCBS REQUEST (Return error) LongTermDenial SIP Parameter values SUBSCRIBE: <Request URI>, m=BS Event: call-completion Comments Message flows SCCP MGCF Mg (X)UDT (TC-Begin) SUBCRIBE (X)UDT (TC-End) 403 Forbidden Apply post test routine TP number TP_408_045 Reference 7.5.11.2, table 7.5.11.2.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name CCNR request unsuccessful 403 Forbidden is sent Test Purpose Ensure that on receipt of a 403 Forbidden final response upon CCNR was requested, a TC-End CCNR REQUEST (Return error) component containing the LongTermDenial Element is sent TCAP Parameter values TC-End CCNR REQUEST (Return error) LongTermDenial SIP Parameter values SUBSCRIBE: <Request URI>, m=NR Event: call-completion Comments Message flows SCCP MGCF Mg (X)UDT (TC-Begin) SUBCRIBE (X)UDT (TC-End) 403 Forbidden Apply post test routine TP number TP_408_046 Reference 7.5.11.2, table 7.5.11.2.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name CCBS invoked. SUBCRIBE Expires 0 received TC-End is sent Test Purpose Ensure that on receipt of a NOTIFY request the Subscription-State header is set to 'terminated' and the subexp-params reason set to 'noresource' upon CCBS was successfully invoked, a TC-End message is sent containing the CCBS CANCEL component TCAP Parameter values TC-End CCBS CANCEL SIP Parameter values NOTIFY: <Request URI> Event:call-completion Subscription-State: terminated; reason=noresource Comments Message flows SCCP MGCF Mg CCBS request successfully invoked (X)UDT (TC-End) NOTIFY 200 OK NOTIFY Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 382 TP number TP_408_047 Reference 7.5.11.2, table 7.5.11.2.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name CCNR invoked at the O-MGCF SUBCRIBE Expires 0 received TC-End is sent Test Purpose Ensure that on receipt of a NOTIFY request the Subscription-State header is set to 'terminated' and the subexp-params reason set to 'noresource' upon CCNR was successfully invoked, a TC-End message is sent containing the CCBS CANCEL component TCAP Parameter values TC-End CCBS CANCEL SIP Parameter values NOTIFY: <Request URI> Event:call-completion Subscription-State: terminated; reason=noresource Comments Message flows SCCP MGCF Mg CCNR request successfully invoked (X)UDT (TC-End) NOTIFY 200 OK NOTIFY Apply post test routine TP number TP_408_048 Reference 7.5.11.2, table 7.5.11.2.3 TSS reference IMS-SS/CC/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/24 Test Purpose name Interworking of Remote user free indication at the O-MGCF Test Purpose Ensure that on receipt of a NOTIFY request the cc-state body is set to 'ready' upon Call completion was successfully invoked, a TC-Cont message is sent containing the CCBS REMOTE USER FREE component TCAP Parameter values TC-Cont CCBS REMOTE USER FREE SIP Parameter values NOTIFY: Event: call-completion Content-Type: application/call-completion cc-state: ready Comments Message flows SCCP MGCF Mg CCBS or CCNR request successfully invoked (X)UDT (TC-Cont) NOTIFY 200 OK (NOTIFY) Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 383
2d8a87bbce8161354cc3b7cef0fdf7f5	102 710-2	6.3.9 Communication Waiting (CW)	TP number TP_409_001 Reference 7.5.12 TSS reference IMS-SS/CW/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/8 Test Purpose name Mapping of Generic notification 'call waiting' in an ACM into Alert-Info header Test Purpose Ensure that on receipt of an ACM the Called party status indicator is set to 'subscriber free' and a Generic notification indicator parameter is present set to ''Call is a waiting call', a 180 Ringing is sent. An Alert-Info header is present and the urn is set to 'urn:alert:service:call-waiting' ISUP Parameter values ACM: Backward call indicator Called party status indicator Subscriber free Generic notification Call is a waiting call SIP Parameter values 180: Alert-Info urn:alert:service:call-waiting Comments Message flows Mg MGCF ISUP INVITE IAM 180 Ringing ACM Apply post test routine TP number TP_409_002 Reference 7.5.12 TSS reference IMS-SS/CW/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/8 Test Purpose name Mapping of Generic notification 'call waiting' in a CPG into Alert-Info header Test Purpose Ensure that on receipt of a CPG the Event indicator is set to 'Alerting' and a Generic notification indicator parameter is present set to ''Call is a waiting call', a 180 Ringing is sent. An Alert-Info header is present and the urn is set to 'urn:alert:service:call-waiting' ISUP Parameter values CPG: Event indicator Alerting Generic notification Call is a waiting call SIP Parameter values 180: Alert-Info urn:alert:service:call-waiting Comments Message flows Mg MGCF ISUP INVITE IAM ACM 180 Ringing CPG Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 384 TP number TP_409_003 Reference 7.5.12 TSS reference IMS-SS/CW/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/8 Test Purpose name Interworking of the Alert-Info header in a 180 into Generic notification 'Call waiting' in an ACM Test Purpose Ensure that on receipt of a 180 Ringing and an Alert Info header is present the value is set to 'urn:alert:service:call-waiting', an ACM is sent containing a Generic notification indication parameter set to 'Call is a waiting call' ISUP Parameter values ACM: Backward call indicator Called party status indicator Subscriber free Generic notification Call is a waiting call SIP Parameter values 180: Alert-Info urn:alert:service:call-waiting Comments Message flows Mg MGCF ISUP IAM INVITE 100 Trying ACM 180 Ringing Apply post test routine TP number TP_409_004 Reference 7.5.12 TSS reference IMS-SS/CW/ Selection criteria PICS 6.3.1/2 AND PICS 6.3.2/8 Test Purpose name Interworking of the Alert-Info header in a 180 into Generic notification 'Call waiting' in a CPG Test Purpose Ensure that on receipt of a 180 Ringing and an Alert Info header is present the value is set to 'urn:alert:service:call-waiting', a CPG is sent containing a Generic notification indication parameter set to 'Call is a waiting call'. The Event indicator is set to 'Alerting' ISUP Parameter values CPG: Event indicator Alerting Generic notification Call is a waiting call SIP Parameter values 180: Alert-Info urn:alert:service:call-waiting Comments Message flows Mg MGCF ISUP IAM INVITE 100 Trying ACM T i/w2 expired CPG 180 Ringing Apply post test routine ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 385 Annex A (informative): Bibliography ISO/IEC 9646-3: "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)". ETSI ETSI TS 102 710-2 V3.3.1 (2013-08) 386 History Document history V3.1.1 May 2011 Publication V3.2.1 July 2012 Publication V3.3.1 August 2013 Publication
ebcc32db3e89186add7c8bf973fde240	102 710-1	1 Scope	The present document specifies the Protocol Implementation Conformance Statement for SIP-ISUP Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks based on TS 129 163 [1] (Release 8).
ebcc32db3e89186add7c8bf973fde240	102 710-1	2 References	References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity.
ebcc32db3e89186add7c8bf973fde240	102 710-1	2.1 Normative references	The following referenced documents are necessary for the application of the present document. [1] ETSI TS 129 163: "Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks (3GPP TS 29.163 Release 8)". [2] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts". [3] ISO/IEC 9646-7: "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements".
ebcc32db3e89186add7c8bf973fde240	102 710-1	2.2 Informative references	The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] ITU-T Recommendation Q.730: "ISDN User Part supplementary services". [i.2] ITU-T Recommendations Q.731.1 to Q.731.8: "Stage 3 description for number identification supplementary services using Signalling System No. 7". [i.3] ITU-T Recommendations Q.732.2 to Q.732.7: "Stage 3 description for call offering supplementary services using Signalling System No. 7". [i.4] ITU-T Recommendations Q.733.1 to Q.733.5: "Stage 3 description for call completion supplementary services using Signalling System No. 7". [i.5] ITU-T Recommendations Q.734.1 to Q.734.2: "Stage 3 description for multiparty supplementary services using Signalling System No. 7". [i.6] ITU-T Recommendations Q.735.1 to Q.735.6: "Stage 3 description for community of interest supplementary services using Signalling System No. 7". [i.7] ITU-T Recommendations Q.736.1 to Q.736.3: "Stage 3 description for charging supplementary services using Signalling System No. 7". [i.8] ITU-T Recommendation Q.737.1: "Stage 3 description for additional information transfer supplementary services using Signalling System No. 7 : User-to-user signalling (UUS)". ETSI ETSI TS 102 710-1 V3.1.1 (2011-05) 6
ebcc32db3e89186add7c8bf973fde240	102 710-1	3 Definitions, symbols and abbreviations
ebcc32db3e89186add7c8bf973fde240	102 710-1	3.1 Definitions	For the purposes of the present document, the terms and definitions given in [1], [2], [3] and the following apply: PICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes a PICS Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification Protocol Implementation Conformance Statement (PICS): statement made by the supplier of an implementation or system claimed to conform to a given protocol specification, stating which capabilities have been implemented NOTE: This may contain additional information.
ebcc32db3e89186add7c8bf973fde240	102 710-1	3.2 Symbols	For the purposes of the present document, the symbols given in [1] apply.
ebcc32db3e89186add7c8bf973fde240	102 710-1	3.3 Abbreviations	For the purposes of the present document, the abbreviations given in [1] and the following apply: ICS Implementation Conformance Statement IUT Implementation Under Test PICS Protocol ICS SCS System Conformance Statement SUT System Under Test
ebcc32db3e89186add7c8bf973fde240	102 710-1	3.4 Conformance to this PICS proforma specification	If it claims to conform to the present document, the actual PICS proforma to be filled in by a supplier shall be technically equivalent to the text of the PICS proforma given in clause 4, and shall preserve the numbering/naming and ordering of the proforma items. A PICS which conforms to the present document shall be a conforming PICS proforma completed in accordance with the guidance for completion given in clause 4.1.
ebcc32db3e89186add7c8bf973fde240	102 710-1	4 PICS proforma for TS 129 163	Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this clause so that it can be used for its intended purposes and may further publish the completed PICS. 4.1 Guidance for completing the PICS proforma (purposes and structure) The purpose of this ICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in TS 129 163 [1] may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses for the following categories of information: - guidance for completing the PICS proforma; ETSI ETSI TS 102 710-1 V3.1.1 (2011-05) 7 - identification of the implementation; - identification of the <reference specification type>; - global statement of conformance; - roles.
ebcc32db3e89186add7c8bf973fde240	102 710-1	4.2 Abbreviations and conventions	The PICS proforma contained in this clause is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 [3]. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means "is <item description> supported by the implementation?". Status column The following notations, defined in ISO/IEC 9646-7 [3], are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible to use the capability. x prohibited (excluded) - there is a requirement not to use this capability in the given context. o.i qualified optional - for mutually exclusive or selectable options from a set. "i" is an integer which identifies a unique group of related optional items and the logic of their selection which is defined immediately following the table. ci conditional - the requirement on the capability ("m", "o", "x" or "n/a") depends on the support of other optional or conditional items. "i" is an integer identifying a unique conditional status expression which is defined immediately following the table. Reference column The reference column makes reference to TS 129 163 [1], except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 [3], are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). If this PICS proforma is completed in order to describe a multiple-profile support in a system, it is necessary to be able to answer that a capability is supported for one profile and not supported for another. In that case, the supplier shall enter the unique reference to a conditional expression, preceded by "?" (e.g. ?3). This expression shall be given in the space for comments provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers to a single profile and which takes the value TRUE if and only if that profile is to be used. ETSI ETSI TS 102 710-1 V3.1.1 (2011-05) 8 EXAMPLE: ?3: IF prof1 THEN Y ELSE N In case of protocol, the following text should be added: NOTE: As stated in ISO/IEC 9646-7 [3], support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. If the ICS proforma does not contain tables with "values allowed" columns and "values supported" columns, the two following column descriptions shall be removed. Values allowed column The values allowed column contains the type, the list, the range, or the length of values allowed. The following notations are used: - range of values: <min value> .. <max value> example: 5 .. 20 - list of values: <value1>, <value2>, ..., <valueN> example: 2 ,4 ,6 ,8, 9 example: '1101'B, '1011'B, '1111'B example: '0A'H, '34'H, '2F'H - list of named values: <name1>(<val1>), <name2>(<val2>), ..., <nameN>(<valN>) example: reject(1), accept(2) - length: size (<min size> .. <max size>) example: size (1 .. 8) Values supported column The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the ranges of values supported by the implementation shall be indicated.
ebcc32db3e89186add7c8bf973fde240	102 710-1	4.3 Instructions for completing the PICS proforma	The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support or supported column boxes provided, using the notation described in clause 4.2. If necessary, the supplier may provide additional comments in space at the bottom of the tables or separately. More detailed instructions are given at the beginning of the different clauses of the PICS proforma.
ebcc32db3e89186add7c8bf973fde240	102 710-1	5 Identification of the implementation	Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test (SUT)) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information should both be filled in if they are different. A person who can answer queries regarding information supplied in the ICS should be named as the contact person.
ebcc32db3e89186add7c8bf973fde240	102 710-1	5.1 Date of the statement	......................................................................................................................................................................................... ETSI ETSI TS 102 710-1 V3.1.1 (2011-05) 9
ebcc32db3e89186add7c8bf973fde240	102 710-1	5.2 Implementation Under Test (IUT) identification	IUT name: ......................................................................................................................................................................................... ......................................................................................................................................................................................... IUT version: .........................................................................................................................................................................................
ebcc32db3e89186add7c8bf973fde240	102 710-1	5.3 System Under Test (SUT) identification	SUT name: ......................................................................................................................................................................................... ......................................................................................................................................................................................... Hardware configuration: ......................................................................................................................................................................................... ......................................................................................................................................................................................... ......................................................................................................................................................................................... Operating system: .........................................................................................................................................................................................
ebcc32db3e89186add7c8bf973fde240	102 710-1	5.4 Product supplier	Name: ......................................................................................................................................................................................... Address: ......................................................................................................................................................................................... ......................................................................................................................................................................................... ......................................................................................................................................................................................... Telephone number: ......................................................................................................................................................................................... Facsimile number: ......................................................................................................................................................................................... E-mail address: ......................................................................................................................................................................................... Additional information: ......................................................................................................................................................................................... ......................................................................................................................................................................................... ......................................................................................................................................................................................... ETSI ETSI TS 102 710-1 V3.1.1 (2011-05) 10
ebcc32db3e89186add7c8bf973fde240	102 710-1	5.5 Client (if different from product supplier)	Name: ......................................................................................................................................................................................... Address: ......................................................................................................................................................................................... ......................................................................................................................................................................................... ......................................................................................................................................................................................... Telephone number: ......................................................................................................................................................................................... Facsimile number: ......................................................................................................................................................................................... E-mail address: ......................................................................................................................................................................................... Additional information: ......................................................................................................................................................................................... .........................................................................................................................................................................................
ebcc32db3e89186add7c8bf973fde240	102 710-1	5.6 PICS contact person	(A person to contact if there are any queries concerning the content of the ICS) Name: ......................................................................................................................................................................................... Telephone number: ......................................................................................................................................................................................... Facsimile number: ......................................................................................................................................................................................... E-mail address: ......................................................................................................................................................................................... Additional information: ......................................................................................................................................................................................... ......................................................................................................................................................................................... .........................................................................................................................................................................................
ebcc32db3e89186add7c8bf973fde240	102 710-1	5.7 Global statement of conformance	Are all mandatory capabilities implemented? (Yes/No) ..................... ETSI ETSI TS 102 710-1 V3.1.1 (2011-05) 11 NOTE: Answering "No" to this question indicates non-conformance to the [1] specification. Non-supported mandatory capabilities are to be identified in the ICS, with an explanation of why the implementation is non-conforming, on pages attached to the PICS proforma.
ebcc32db3e89186add7c8bf973fde240	102 710-1	6 Statement of conformance to TS 129 163
ebcc32db3e89186add7c8bf973fde240	102 710-1	6.1 Major capabilities	Table 6.1.1: Major capabilities Item Item description Reference Status Support 1 The System Under Test is interconnected with an ISUP network 7.2 o.1 2 The System Under Test is interconnected with an BICC network 7.3 o.1 o.1: It is mandatory to support exactly one of these items. Comments:
ebcc32db3e89186add7c8bf973fde240	102 710-1	6.2 Basic call capabilities	Table 6.2.1: Basic call capabilities Item Item description Reference Status Support 1 The System is able to support preconditions requested in the Supported header or Require header? 7.2.3.1.1 o 2 The SUT sends the IAM indicating the COT procedure immediately after the reception of the INVITE and precondition extension is included in the SIP Supported or Require header 7.2.3.1.1 c7211 3 The SUT sends the INVITE request without waiting for an outstanding COT message 7.2.3.2.1.2 o.2 4 the SUT defers sending the INVITE request until receiving a COT message 7.2.3.2.3 o.2 5 The SUT supports the PSTN XML Schema to be used for providing the BearerCapability, Low Layer Compatibility, High Layer Compatibility and Progress indicator embedded as body in SIP messages F.2 o 6 The Forward call indicators Interworking indicator is set to '0', ISDN user part/BICC indicator is set to '1', ISDN access indicator is set to '1' if the TMR in the IAM is sent with the value '64 kbit/s unrestricted' 7.2.3.1.2.3 o 7 The sending of the User Teleservice Information parameter is supported driven from the PSTN XML HighLayerCharacteristics element 7.2.3.1.2.5 c7212 8 The HOP counter procedure is supported and mapping from/to the Max-Forwards header is supported 7.2.3.1.2.9 o 9 The P-Early-Media header is supported 7.2.3.1.4, 7.2.3.1.4A, 7.2.3.1.4B o 10 The SUT generates a Call-Info header field, or an Alert-Info header field to provide media instead of the in-band media received from the PSTN 7.2.3.1.4, 7.2.3.1.4A o 11 The SUT sends an INR message to request the calling party number and not send the INVITE request until receiving an INF message with calling party number If no calling party number is received in the incoming IAM message 7.2.3.2.1.3 o ETSI ETSI TS 102 710-1 V3.1.1 (2011-05) 12 Item Item description Reference Status Support 12 If no calling party number is received in the INF message the SUT reject the communication 7.2.3.2.1.3 c7213 13 The sending of 'dai' parameter is supported 7.2.3.2.2B.2 o 14 The SUT has the knowledge that the call is transited to a PSTN network, the SUT decides not to generate the awaiting answer indication when receiving the 180 Ringing message and backward early media is not authorized 7.2.3.2.4 o 15 The SUT is supporting capabilities associated with the Alert-Info header field 7.2.3.2.4 o 16 the SUT initiates the sending of the awaiting answer indication if the header authorizes backward early media 7.2.3.2.4 o 17 the SUT terminates the sending of the awaiting answer indication if the header authorizes backward early media 7.2.3.2.4 o 18 The Backward call indicators Interworking indicator is set to '0', ISDN user part/BICC indicator is set to '1', ISDN access indicator is set to '1' if the TMR in the IAM was received with the value '64 kbit/s unrestricted' 7.2.3.2.5.1 o 19 Does the SUT instruct the MGW to send media available at the associated URL to the PSTN leg of the communication if a reINVITE is received containing a Call-Info header field? 7.2.3.2.11A o 20 Does the SUT supporting the capabilities associated with the Error-Info header field the SUT instruct the IM-MGW to play out media available at the associated URL towards PSTN 7.2.3.2.12 o 21 The PSTN XML sendingCompleteIndication, if present, is mapped to the sending terminated digit (hexadecimal digit F) in the address signals field of the Called Party Number parameter. 7.2.3.1.2.1 o o.2: It is optional to support exactly one of these items. c7211: IF 7.2.1/1 THEN o ELSE n/a c7212: IF 7.2.1/5 THEN o ELSE n/a c7213: IF 7.2.1/11 THEN o ELSE n/a Comments: Table 6.2.2: Number portability and Carrier based routing Item Item description Reference Status Support 1 Number Portability Separate Directory Number Addressing Method is used 7.2.3.1.2A.1.1 o.3 2 Number Portability Concatenated Addressing Method is used 7.2.3.1.2A.1.2 o.3 3 Number Portability Separate Network Routing Number Addressing Method is used 7.2.3.1.2A.1.3 o.3 4 Number Portability Forward Information parameter is sent 7.2.3.1.2A.2 o 5 Carrier-based routeing supported 7.2.3.1.2B, 7.2.3.2.2B o 6 The Transit Network Selection parameter is sent 7.2.3.1.2B.1 c7221 7 The Carrier Selection Information parameter is sent 7.2.3.1.2B.2 c7221 8 The sending of 'cic' parameter supported 7.2.3.2.2B1 c7221 9 The sending of 'dai' parameter is supported 7.2.3.2.2B.2 c7221 o.3: It is optional to support exactly one of these items. c7221: IF 7.2.2/5 THEN o ELSE n/a ETSI ETSI TS 102 710-1 V3.1.1 (2011-05) 13 Table 6.2.3: Overlap capability Item Item description Reference Status Support 1 The 'In-dialogue Method' is supported 7.2.3.1.3A.2 o 2 The 'Multiple INVITE Method' is supported 7.2.3.1.3A.3 o 3 If the end of the address signalling is determined the SUT inserts the PSTN XML sendingCompleteIndication 7.2.3.2.1.4 c7231 c7231: IF 7.2.1/5 THEN o ELSE n/a Table 6.2.4: ISDN bearer capabilities Item Item description Reference Status Support 1 The SUT supports the interworking of a CLEARMODE codec in the received INVITE request and PSTN XML Bearer Capability element is present 7.2.3.1.1 o 2 The SUT supports the interworking of Transmission Medium Requirement 64 kbit/s received in the IAM 7.2.3.2.1 o
ebcc32db3e89186add7c8bf973fde240	102 710-1	6.3 Simulation service capabilities	Table 6.3.1: Simulation service major capabilities Item Item description Reference Status Support 1 The SUT behaviour is related to supplementary services as defined in ITU-T Recommendations Q.730 [i.1] to Q.737 [i.8] when interworking with an IMS which does not use a Multimedia Telephony Application Server (MTAS) providing supplementary services according to 3GPP 7.4 o 2 the SUT behaviour is related to supplementary services as defined in ITU-T Recommendations Q.730 [i.1] to Q.737 [i.8] when interworking with an IMS which uses a Multimedia Telephony Application Server (MTAS) providing supplementary services according to 3GPP 7.5 o ETSI ETSI TS 102 710-1 V3.1.1 (2011-05) 14 Table 6.3.2: Simulation service interworking capabilities Item Item description Reference Status Support 1 The interworking of Calling line identification presentation/restriction (CLIP/CLIR) respectively Originating Identification Presentation (OIP) and Originating Identification Restriction (OIR) is supported 7.4.1, 7.5.1 o 2 Connected line presentation and restriction (COLP/COLR) respectively Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) is supported 7.4.2, 7.5.2 o 3 The interworking of Malicious call identification respectively Malicious Communication Identification (MCID) is supported 7.4.4, 7.5.9 o 4 The interworking of Subaddressing (SUB) is supported 7.4.5 o 5 The interworking of Call Forwarding Busy (CFB)/ Call Forwarding No Reply (CFNR)/Call Forwarding Unconditional (CFU)/Call Deflection (CD) respectively Communication Diversion (CDIV) is supported 7.4.6, 7.4.7, 7.5.4 o 6 The interworking of Explicit Call Transfer (ECT) respectively is supported 7.4.8, o 7 The interworking of Call Waiting (CW) is supported 7.4.9 o 8 The interworking of Call Waiting (CW) is supported 7.5.12 o 9 The interworking of Call Hold (HOLD) respectively Communication Hold (HOLD) is supported 7.4.10, 7.5.5 o 10 The interworking of Call Completion on busy subscriber (CCBS) is supported 7.4.11 o 11 The interworking of Completion of Calls on No Reply (CCNR) is supported 7.4.12 o 12 The interworking of Terminal Portability (TP) is supported 7.4.13 o 13 The interworking of Conference calling (CONF)/ Three-Party Service (3PTY) is supported 7.4.14 o 14 The interworking of Closed User Group (CUG) is supported 7.4.16 o 15 The interworking of Multi-Level Precedence and Pre- emption (MLPP) is supported 7.4.17 o 16 The interworking of Global Virtual Network Service (GVNS) is supported 7.4.18 o 17 The interworking of Reverse charging (REV) is supported 7.4.20 o 18 The interworking of User-to-User Signalling (UUS) is supported 7.4.21 o 19 The interworking of Anonymous Call rejection (ACR) is supported 7.4.23 o 20 The interworking Conference call (CONF) is supported 7.5.6 o 21 The interworking of Anonymous Communication Rejection (ACR) and Communication Barring (CB) is supported 7.5.7 o 22 The interworking of Message Waiting Indication (MWI) is supported 7.5.8 o 23 The interworking of Closed User Group (CUG) is supported 7.5.10 o 24 The interworking of CCBS/CCNR is supported 7.5.11 o ETSI ETSI TS 102 710-1 V3.1.1 (2011-05) 15 Table 6.3.3: OIP interworking capabilities Item Item description Reference Status Support 1 The SUT include a network provided E.164 Calling party number if no P-Asserted-Identity was received 7.5.1, 7.2.3.1.2.6 c7331 2 The SUT omits the Address signals of the Calling party number if no P-Asserted-Identity was received 7.5.1, 7.2.3.1.2.6 c7331 3 The SUT set the APRI of the Calling party number to 'Address not available' if no P-Asserted-Identity was received 7.5.1, 7.2.3.1.2.6 c7332 4 The SUT sets the APRI of the Calling party number to 'presentation restricted by network' instead of the 'presentation restricted' if no P-Asserted-Identity was received 7.5.1, 7.2.3.1.2.6 o 5 The SUT omits the additional calling party number parameter if the Calling party number has been omitted if no P-Asserted-Identity was received 7.5.1, 7.2.3.1.2.6 c7332 6 The SUT omits the additional calling party number parameter if the P-Asserted-Identity has been received 7.5.1, 7.2.3.1.2.6 o o.4: It is mandatory to support exactly one of these items. c7331 IF 7.3.3/1 THEN o.4 ELSE n/a c7332 IF 7.3.3/2 THEN o ELSE n/a Table 6.3.4: COLP interworking capabilities Item Item description Reference Status Support 1 The SUT invokes the COLP service by setting the "Connected Line Identity Request indicator" field of the "Optional forward call indicators" parameter in the sent IAM to "requested" 7.4.2.1.1 o Table 6.3.5: CDIV interworking capabilities Item Item description Reference Status Support 1 The SUT maps the escaped Reason header in the second last hi-targeted-uri into the Event indicator of the CPG national values 7.4.6.2.2, table 7.4.6.2.2.7 o 2 The SUT maps the Redirecting reason in the Call diversion information into the Reason header in the second last hi-targeted-to-uri in the History-Info header 7.4.6.3.3, table 7.4.6.3.3.3 table 7.4.6.3.3.4 table 7.4.6.3.3.5 o 3 The SUT maps the cause parameter in the last hi- targeted-uri into the Event indicator national values 7.5.4.2.1 table 7.5.4.2.1.7 o Table 6.3.6: HOLD interworking capabilities Item Item description Reference Status Support 1 The SUT allows to hold and retrieve a session in the early dialogue 7.4.10 o Table 6.3.7: REV interworking capabilities Item Item description Reference Status Support 1 The SUT discards the REV service invocation without affect the call 7.4.20 o.5 2 The SUT returns explicit rejection of the REV service invocation 7.4.20 o.5 o.5: It is optional to support exactly one of these items. ETSI ETSI TS 102 710-1 V3.1.1 (2011-05) 16 Table 6.3.8: User-to-user interworking capabilities Item Item description Reference Status Support 1 The MGCF supports the User-to-user indicator (the User-to-user indicator is recognized) 7.4.21.2, 7.4.21.3, 7.4.21.4 o Table 6.3.9: CONF interworking capabilities Item Item description Reference Status Support 1 The conference event package option is implemented 7.5.6.2 o Table 6.3.10: CUG interworking capabilities Item Item description Reference Status Support 1 The IMS network does not support the CUG supplementary service 7.5.6.2 o
ebcc32db3e89186add7c8bf973fde240	102 710-1	6.4 Timers	Table 6.4.1: Timers Item Item description Reference Status Support Values [seconds] Allowed Supported 1 Ti/w1 7.2.3.3 m 4 to 6 (default 4) 2 Ti/w2 7.2.3.3 m 4 to 20 (default 4) 3 Ti/w3 7.2.3.3 m 4 to 6 (default 4) 4 TTIR1 7.2.3.3 o 0,1 to 2 (default 0,1) ETSI ETSI TS 102 710-1 V3.1.1 (2011-05) 17 History Document history V3.1.1 May 2011 Publication
51d44a05e2c4070c4af708d7e99e7359	101 967	1 Scope	The present document specifies the stage 2 description of the Immediate Service Termination (IST) service which provides the means for the HPLMN to terminate all the activities of an HPLMN subscriber in a VPLMN. Two implementations of IST are described: an implementation based on CAMEL, and an implementation based on a new MAP command.
51d44a05e2c4070c4af708d7e99e7359	101 967	2 References	The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. • For this Release 1998 document, references to GSM documents are for Release 1998 versions (version 7.x.y). [1] GSM 01.04: "Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms". [2] GSM 02.32: "Digital cellular telecommunications system (Phase 2+); Immediate Service Termination (IST); Service description - Stage 1".
51d44a05e2c4070c4af708d7e99e7359	101 967	3 Definitions and abbreviations
51d44a05e2c4070c4af708d7e99e7359	101 967	3.1 Definitions	For the purposes of the present document, the following definition apply: Subscriber activities: subscriber activities that must be terminated. These can be call related events (e.g. call set-up, call termination) or the invocation of call related and call independent supplementary services (e.g. Call Hold, Call Waiting, Call Transfer, Call Forwarding, Unstructured Supplementary Service Data (USSD)).
51d44a05e2c4070c4af708d7e99e7359	101 967	3.2 Abbreviations	For the purposes of the present document, the abbreviations given is GSM 01.04 and the following apply: FDS Fraud Detection System FIGS Fraud Information Gathering System IST Immediate Service Termination MO Mobile Originated MT Mobile Terminated O-CSI Originating CAMEL Subscription Information T-CSI Terminating CAMEL Subscription Information ETSI ETSI TS 101 967 V7.0.1 (2001-10) 6 (GSM 03.35 version 7.0.1 Release 1998)
51d44a05e2c4070c4af708d7e99e7359	101 967	4 Information flows
51d44a05e2c4070c4af708d7e99e7359	101 967	4.1 CAMEL implementation	For the Customised Applications for Mobile network Enhanced Logic (CAMEL) implementation of Immediate Service Termination (IST) for a particular subscriber, an "IST" command (in reality, the CAMEL message "ReleaseCall") must be sent by the gsmSCF of the home PLMN to the gsmSSF controlling the call, for all the calls of the subscriber. Prior to the sending of the IST command, the Mobile Application Part (MAP) command "Cancel Location" should be sent to the VLR at which the subscriber is registered. This will ensure that the subscriber cannot re-commence service at that VLR after the IST command has been executed. See annex B of GSM 02.32. The compilation of the list of MSCs to which the IST command should be sent is outside the scope of the present document. However, if a PLMN operator wishes to implement IST using CAMEL, the list of MSCs to which the IST command should be sent for a subscriber is the list of MSCs with which the CAMEL server has a relationship for that subscriber. If this data is not available directly from the CAMEL server, it may be obtained using Fraud Information Gathering System (FIGS) or an Fraud Detection System (FDS) (if the HPLMN is using CAMEL for IST then it is likely that it will also be monitoring the subscriber’s activities using FIGS level 2 or 3, which use CAMEL).
51d44a05e2c4070c4af708d7e99e7359	101 967	4.2 Non-CAMEL implementation	FFS
51d44a05e2c4070c4af708d7e99e7359	101 967	5 Functional behaviour - CAMEL implementation	This clause describes the implementation of IST using CAMEL. CAMEL can be used to terminate all the mobile originated (MO), mobile terminated (MT) and forwarded (CF) calls of a subscriber, provided there is a control relationship between the CAMEL server (the gsmSCF) in the HPLMN and the MSC (visited MSC or GMSC) (the gsmSSF) controlling the call or forwarding leg.

Subsets and Splits

No community queries yet

The top public SQL queries from the community will appear here once available.