hash
stringlengths 32
32
| doc_id
stringlengths 7
13
| section
stringlengths 3
121
| content
stringlengths 0
3.82M
|
|---|---|---|---|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.1 CLIP/OIP
|
IS_XXSSCLIP01 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 7.1.3 ETSI EN 383 001 [49], clause 7.1.3 ETSI 129 163 [i.20], clause 7.2.3.2.2.3 ETSI TS 124 607 [43] TSS reference: ISDN-SIP/Supplementary_services/CLIP Selection criteria: The called user is provided with CLIP Test purpose: Ensure that when the Calling party number is provided by the calling user (verified and passed) with the APRI "presentation allowed". The Type of number is defined as : TYPE_NUMBER, the Calling party number information elements is correctly delivered to the called (served) with following mapping rules: • The SIP P-Asserted-Identity header is Derived from Calling party information element Address Signal. • The Calling Party Number is mapped into the SIP From header. ISDN Parameter values: BC= PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN SUT SIP SETUP INVITE CALL PROCEEDING … ALERTING 180 Ringing CONN 200 OK INVITE Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 90 Values for the test purpose IS_XXSSCLIP01 SETUP→ INVITE→ Calling party number i.e. From Header Field P-Asserted -Identity TYPE_NUMBER Numbering plan identification National number ISDN/telephony numbering plan or Unknown The user is derived from the address string of the calling party number IE sip: "+""+"CC+ NDC + SN @hostportion; user=phone The user is derived from the address string of the calling party number IE "+""+"CC+ NDC + SN @hostportion; user=phone International number The user is derived from the address string of the calling party number IE sip: "+""+"CC+ NDC+ SN @hostportion; user=phone The user is derived from the address string of the calling party number IE sip: "+""+"CC+ NDC + SN @hostportion; user=phone Unknown The user is derived from the address string of the calling party number IE sip: "+""+"CC+ NDC + SN @hostportion; user=phone The user is derived from the address string of the calling party number IE sip: "+""+"CC+ NDC + SN @hostportion; user=phone Subscriber number The user is derived from the address string of the calling party number IE sip: "+""+"CC+ NDC + SN @hostportion; user=phone The user is derived from the address string of the calling party number IE sip: "+""+"CC+ NDC + SN @hostportion; user=phone IS_XXSSCLIP02 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 7.1.3 ETSI EN 383 001 [49], clause 7.1.3 ETSI 129 163 [i.20], clause 7.2.3.2.2.3 ETSI TS 124 607 [43] TSS reference: ISDN-SIP/Supplementary_services/CLIP Selection criteria: The called user is provided with CLIP Test purpose: Ensure that when no Calling party number information element is provided by the calling user, (and no Calling party subaddress), the Calling party number information element is network provided and correctly delivered to the called (served) user with following mapping rules: • The SIP P-Asserted-Identity header is Derived from Calling party information element Address Signal. • The Calling Party Number is mapped into the SIP From header. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN SUT SIP SETUP INVITE CALL PROCEEDING … ALERTING 180 Ringing CONN 200 OK INVITE Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 91 Values for the test purpose IS_XXSSCLIP02 SETUP→ INVITE→ Calling party number i.e. From Header Field P-Asserted -Identity TYPE_NUMBER Numbering plan identification No or invalid calling party number information element (see note) Default Public user identity sip: "+""+"CC+ NDC + SN @hostportion; user=phone Default Public user identity sip: "+""+"CC+ NDC + SN @hostportion; user=phone NOTE: Validity conditions of the calling party number information element are defined in clause 3.5.2.2.1 of ITU-T Q.951 [i.17]. IS_XXSSCLIP03 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 7.1.3 ETSI EN 383 001 [49], clause 7.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.2.2.3 ETSI TS 124 607 [43] TSS reference: ISDN-SIP/Supplementary_services/CLIP Selection criteria: The called user is provided with CLIP Special arrangement applies Test purpose: Ensure that when a special arrangement applies and a Calling party number information element and a valid calling number is provided by the calling user, the user provided, not screened number (generic number) delivered to the called (served) user. In the SIP From header field the addr-spec is derived from unscreened Calling party number. The SIP P-Asserted-Identity header is Derived from Calling party information element Address Signal. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN SUT SIP SETUP INVITE CALL PROCEEDING … ALERTING 180 Ringing CONN 200 OK INVITE Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 92 Values for the test purpose IS_XXSSCLIP03 SETUP→ INVITE→ Calling party number i.e. From Header Field P-Asserted -Identity TYPE_NUMBER Numbering plan identification National number ISDN/telephony numbering plan or Unknown The user is derived from the address string of the calling party number IE sip: "+""+"CC+ NDC + SN @hostportion; user=phone Default Public user identity sip: "+""+"CC+ NDC + SN @hostportion; user=phone International number The user is derived from the address string of the calling party number IE sip: "+""+"CC+ NDC + SN @hostportion; user=phone Default Public user identity sip: "+""+"CC+ NDC + SN @hostportion; user=phone IS_XXSSCLIP04 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 7.1.3 ETSI EN 383 001 [49], clause 7.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.2.2.3 ETSI TS 124 607 [43] TSS reference: ISDN-SIP/Supplementary_services/CLIP Selection criteria: The called user is provided with CLIP Special arrangement applies. Test purpose: Ensure that when a special arrangement applies and no Calling party number information element is provided by the calling user, the default number of the access of the calling user is correctly delivered to the called (served) user. The mapping rules are described in table 3a. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN SUT SIP SETUP INVITE CALL PROCEEDING … ALERTING 180 Ringing CONN 200 OK INVITE Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 93 Table 3a: Mapping rules for the test purpose IS_XXSSCLIP04 SETUP→ INVITE→ Calling party number i.e. From Header Field P-Asserted -Identity TYPE_NUMBER Numbering plan identification No or invalid calling party number information element Default Public user identity sip: "+""+"CC+ NDC + SN @hostportion; user=phone Default Public user identity sip: "+""+"CC+ NDC + SN @hostportion; user=phone
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.2 CLIR/OIR
|
IS_XXSSCLIR01 ISDN reference to: ETSI EN 300 093-1 [i.4], clause 9.4.1 ETSI EN 300 092-1 [i.14], clause A.2, figure 2 NGN reference to: ITU-T Q.1912.5 [51], clause 7.1.3 ETSI EN 383 001 [49], clause 7.1.3 ETSI 129 163 [i.20], clause 7.2.3.2.2.3 ETSI TS 124 607 [43] IETF RFC 3323 [33] IETF RFC 3325 [34] TSS reference: ISDN-SIP/Supplementary_services/CLIR Selection criteria: The calling user is provided with CLIR permanent mode subscription Test purpose: Ensure that when the Calling party number is provided by the calling user, with Calling party subaddress: Sends a INVITE message where the SIP From header field is set to "anonymous" or "unavailable" and no P-Asserted-Identity header is received. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN SUT SIP SETUP INVITE CALL PROCEEDING … ALERTING 180 Ringing CONN 200 OK INVITE Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 94 IS_XXSSCLIR02 ISDN reference to: ETSI EN 300 093-1 [i.4], clause 9.4.1 ETSI EN 300 092-1 [i.14], clause A.2, figure 2 NGN reference to: ITU-T Q.1912.5 [51], clause 7.1.3 ETSI EN 383 001 [49], clause 7.1.3 ETSI 129 163 [i.20], clause 7.2.3.2.2.3 ETSI TS 124 607 [43] IETF RFC 3323 [33] IETF RFC 3325 [34] TSS reference: ISDN-SIP/Supplementary_services/CLIR Selection criteria: The calling user is provided with CLIR temporary mode subscription Test purpose: Ensure that when the Calling party number is provided by the calling user with the APRI "presentation restricted" and with Calling party subaddress: Sends a INVITE message where the SIP From header field is set to "anonymous" or "unavailable" and no P-Asserted-Identity header is received. ISDN Parameter values: BC=PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN SUT SIP SETUP INVITE CALL PROCEEDING … ALERTING 180 Ringing CONN 200 OK INVITE Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 95 IS_XXSSCLIR03 ISDN reference to: ETSI EN 300 093-1 [i.4], clause 9.4.1 ETSI EN 300 092-1 [i.14], clause A.2, figure 2 NGN reference to: ITU-T Q.1912.5 [51], clause 7.1.3 ETSI EN 383 001 [49], clause 7.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.2.2.3 ETSI TS 124 607 [43] IETF RFC 3323 [33] IETF RFC 3325 [34] TSS reference: ISDN-SIP/Supplementary_services/CLIR Selection criteria: The calling user is provided with CLIR permanent mode subscription Test purpose: Ensure that when no Calling party number is provided by the calling user (and no Calling party subaddress): Sends a INVITE message where the SIP From header field is set to "anonymous" or "unavailable" and no P-Asserted-Identity header is received. ISDN Parameter values: BC=PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN SUT SIP SETUP INVITE CALL PROCEEDING … ALERTING 180 Ringing CONN 200 OK INVITE Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 96 IS_XXSSCLIR04 ISDN reference to: ETSI EN 300 093-1 [i.4], clause 9.4.1 ETSI EN 300 092-1 [i.14], clause A.2, figure 2 NGN reference to: ITU-T Q.1912.5 [51], clause 7.1.3 ETSI EN 383 001 [49], clause 7.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.2.2.3 ETSI TS 124 607 [43] IETF RFC 3323 [33] IETF RFC 3325 [34] TSS reference: ISDN-SIP/Supplementary_services/CLIR/ Selection criteria: The calling user is provided with CLIR temporary mode subscription; The called user is provided with CLIP; Special arrangement applies. Test purpose: Ensure that when a special arrangement applies and a Calling party number information element and a valid calling number with presentation in not allowed is provided by the calling user: Sends a INVITE message where the SIP From header field is set to "anonymous" or "unavailable" and no P-Asserted-Identity header is received. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN SUT SIP SETUP INVITE CALL PROCEEDING … ALERTING 180 Ringing CONN 200 OK INVITE Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 97
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.3 COLP/COLR (TIP/TIR)
|
IS_XXSSCOLP01 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "none" has been received from the terminating user: • no P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP01 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 98 IS_XXSSCOLP02 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "id" has been received from the terminating user: • no P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = (PIXIT) - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP02 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 99 IS_XXSSCOLP03 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "user" has been received from the terminating user: • no P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP03 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 100 IS_XXSSCOLP04 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "header" has been received from the terminating user: • no P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP04 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 101 IS_XXSSCOLP05 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT having not received a provisional 1XX response, on receipt of a 200 OK INVITE for this call without a Privacy header field: • no P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: ANM; Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 102 IS_XXSSCOLP06 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested Test purpose: Ensure that the SUT on receipt of a 200 OK INVITE for this call with a Privacy header field was received with the value "none" has been received: • no P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected Party Number information element User provided, not screened Connected Party Number not present NoAS: NoA_VALUE Comments: ISDN SUT SIP SETUP INVITE CALL PROC ALERTING 180 Ringing CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 103 IS_XXSSCOLP07 ISDN reference to: ETSI EN 300 092-1 [i.14], ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested Test purpose: Ensure that the SUT on receipt of a 200 OK INVITE for this call with a Privacy header field was received with the value "PRIV_VALUE" has been received: • no P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected Party Number information element User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC ALERTING 180 Ringing CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP07 VA PRIV_VALUE VA_1 Id VA_2 User VA_3 Header ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 104 IS_XXSSCOLP08 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "none" has been received from the terminating user: • no P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP08 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 105 IS_XXSSCOLP09 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "id" has been received from the terminating user: • no P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = (PIXIT) - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number User provided, not screened; Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP09 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 106 IS_XXSSCOLP10 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "user" has been received from the terminating user. • no P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number User provided, not screened; Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP10 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 107 IS_XXSSCOLP11 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "header" has been received from the terminating user: • no P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number User provided, not screened; Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP11 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 108 IS_XXSSCOLP12 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT having not received a provisional 1XX response, on receipt of a 200 OK INVITE for this call without a Privacy header field: • no P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 109 IS_XXSSCOLP13 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT having not received a provisional 1XX response, on receipt of a 200 OK INVITE for this call, a Privacy header field with the value "none" has been received: • no P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number Address signals = default public user identity User provided, not screened; Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 110 IS_XXSSCOLP14 ISDN reference to: ETSI EN 300 092-1 [i.14], ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT having not received a provisional 1XX response, on receipt of a 200 OK INVITE for this call, a Privacy header field with the value "PRIV_VALUE" has been received: • no P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number Address signals = not available User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 111 IS_XXSSCOLP15 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested Test purpose: Ensure that the SUT on receipt of a 200 OK INVITE for this call with a Privacy header field was received with the value "none" has been received: • no P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: COONECT; Connected Party Number information element User provided, not screened Connected Party Number not present NoAS: NoA_VALUE Comments: ISDN SUT SIP SETUP INVITE CALL PROC ALERTING 180 Ringing CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 112 IS_XXSSCOLP16 ISDN reference to: ETSI EN 300 092-1 [i.14], ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested Test purpose: Ensure that the SUT on receipt of a 200 OK INVITE for this call with a Privacy header field was received with the value "PRIV_VALUE" has been received: • no P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected Party Number information element User provided, not screened Connected Party Number not present NoAS: NoA_VALUE Comments: ISDN SUT SIP SETUP INVITE CALL PROC ALERTING 180 Ringing CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP16 VA PRIV_VALUE VA_1 Id VA_2 User VA_3 Header ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 113 IS_XXSSCOLP17 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: permanent mode ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "none" has been received from the terminating user: • no P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP17 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 114 IS_XXSSCOLP18 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Permanent mode ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT having not received a provisional 1XX response, on receipt of a 200 OK INVITE for this call without a Privacy header field: • no P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 115 IS_XXSSCOLP19 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Permanent mode ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a 200 OK INVITE for this call with a Privacy header field was received with the value "none" has been received: • no P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected Party Number information element User provided, not screened Connected Party Number not present NoAS: NoA_VALUE Comments: ISDN SUT SIP SETUP INVITE CALL PROC ALERTING 180 Ringing CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 116 IS_XXSSCOLP20 ISDN reference to: ETSI EN 300 092-1 [i.14], ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "none" has been received from the terminating user: • P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP20 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 117 IS_XXSSCOLP21 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "id" has been received from the terminating user: • P-Preferred-Identity header field is provided within the 1xx response • Sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = (PIXIT) - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP21 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 118 IS_XXSSCOLP22 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "user" has been received from the terminating user: • P-Preferred-Identity header field is provided within the 1xx response • Sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP22 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 119 IS_XXSSCOLP23 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "header" has been received from the terminating user: • P-Preferred-Identity header field is provided within the 1xx response • Sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP23 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 120 IS_XXSSCOLP24 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT having not received a provisional 1XX response, on receipt of a 200 OK INVITE for this call without a Privacy header field: • P-Preferred-Identity header field is provided within the 200 OK response • Sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: ANM Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 121 IS_XXSSCOLP25 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested Test purpose: Ensure that the SUT on receipt of a 200 OK INVITE for this call with a Privacy header field was received with the value "none" has been received: • P-Preferred-Identity header field is provided within the 200 OK response • Sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected Party Number information element User provided, not screened Connected Party Number not present NoAS: NoA_VALUE Comments: ISDN SUT SIP SETUP INVITE CALL PROC ALERTING 180 Ringing CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 122 IS_XXSSCOLP26 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested Test purpose: Ensure that the SUT on receipt of a 200 OK INVITE for this call with a Privacy header field was received with the value "PRIV_VALUE" has been received: • P-Preferred-Identity header field is provided within the 200 OK response • Sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected Party Number information element User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC ALERTING 180 Ringing CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP26 VA PRIV_VALUE VA_1 Id VA_2 User VA_3 Header ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 123 IS_XXSSCOLP27 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "none" has been received from the terminating user: • P-Preferred-Identity header field is provided within the 1xx response • Sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP27 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 124 IS_XXSSCOLP28 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "id" has been received from the terminating user: • P-Preferred-Identity header field is provided within the 1xx response • Sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = (PIXIT) - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected number User provided, not screened; Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP28 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 125 IS_XXSSCOLP29 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "user" has been received from the terminating user: • P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected number User provided, not screened; Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP29 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 126 IS_XXSSCOLP30 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "header" has been received from the terminating user: • P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected number User provided, not screened Connected Party Number, number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP30 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 127 IS_XXSSCOLP31 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT having not received a provisional 1XX response, on receipt of a 200 OK INVITE for this call without a Privacy header field: • P-Preferred-Identity header field is provided within the 1xx response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 128 IS_XXSSCOLP32 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT having not received a provisional 1XX response, on receipt of a 200 OK INVITE for this call, a Privacy header field with the value "none" has been received: • P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected number Address signals = default public user identity User provided, not screened; Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 129 IS_XXSSCOLP33 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT having not received a provisional 1XX response, on receipt of a 200 OK INVITE for this call, a Privacy header field with the value "PRIV_VALUE" has been received: • P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number Address signals = not available User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP33 VA PRIV_VALUE VA_1 Id VA_2 User VA_3 Header ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 130 IS_XXSSCOLP34 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation restricted ISDN selection criteria: COLP service has been requested Test purpose: Ensure that the SUT on receipt of a 200 OK INVITE for this call with a Privacy header field was received with the value "none" has been received: • P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected Party Number information element User provided, not screened Connected Party Number not present NoAS: NoA_VALUE Comments: ISDN SUT SIP SETUP INVITE CALL PROC ALERTING 180 Ringing CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 131 IS_XXSSCOLP35 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted ISDN selection criteria: COLP service has been requested Test purpose: Ensure that the SUT on receipt of a 200 OK INVITE for this call with a Privacy header field was received with the value "PRIV_VALUE" has been received: • P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected Party Number information element User provided, not screened Connected Party Number not present NoAS: NoA_VALUE Comments: ISDN SUT SIP SETUP INVITE CALL PROC ALERTING 180 Ringing CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP35 VA PRIV_VALUE VA_1 Id VA_2 User VA_3 Header ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 132 IS_XXSSCOLP36 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: permanent mode ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a provisional 1XX response defined as SIP_MESSAGE_VA with priv-value component is set to "none" has been received from the terminating user: • P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = default public user identity - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC XXXX SIP_MESSAGE_VA CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC Values for test purpose IS_XXSSCOLP36 VA SIP MESSAGE_VA VA_1 180 Ringing VA_2 183 Session Progress ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 133 IS_XXSSCOLP37 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Permanent mode ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT having not received a provisional 1XX response, on receipt of a 200 OK INVITE for this call without a Privacy header field: • P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation restricted SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE CALL PROC CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 134 IS_XXSSCOLP38 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] ETSI TS 124 608 [44] TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Permanent mode ISDN selection criteria: COLP service has been requested by the calling party Test purpose: Ensure that the SUT on receipt of a 200 OK INVITE for this call with a Privacy header field was received with the value "none" has been received: • P-Preferred-Identity header field is provided within the 200 OK response • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = not available - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT Connected Party Number information element User provided, not screened Connected Party Number not present NoAS: NoA_VALUE Comments: ISDN SUT SIP SETUP INVITE CALL PROC ALERTING 180 Ringing CONN 200 OK INVITE ACK Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 135 IS_XXSSCOLP39 ISDN reference to: ETSI EN 300 092-1 [i.14], ETSI EN 300 403-1 [i.3] NGN reference to: ETSI EN 383 001 [49], ETSI TS 129 163 [i.20], ETSI TS 124 608 [44], TIP/TIR reference clause 4.5.2.12 TSS reference: ISDN-SIP/SS/COLP SIP selection criteria: Temporary mode presentation not restricted Terminated user has special arrangement ISDN selection criteria: COLP service has been requested by the calling party Test purpose: The Terminating UE sends an UPDATE request with an updated From and To header. Ensure that if the UE receives a "from-change" tag in a Supported header in an initial INVITE, and the user equipment sends an UPDATE request after the ACK for the 200 OK INVITE containing a connected identity in the From header • sends a CONNECT message with the Connected Party Number information element coded: - Address signals = unscreened number - Numbering plan indicator = ISDN numbering plan - Type of number = PIXIT - Screening indicator = network provided - Address presentation restriction indicator = presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) SIP messages: INVITE: Supported: from-change 18x/200: Supported: from-change UPDATE: From <identity user equipment>) ISDN Parameter values: CONNECT Connected number User provided, not screened Connected Party Number not present Comments: ISDN SUT SIP SETUP INVITE with "from- change" tag ALERTING 180 Ringing 200 OK INVITE ACK UPDATE with updated From and To header 200 OK UPDATE CONN Conversation Conversation DISC BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 136
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.4 CFU
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.4.1 CFU - ISI
|
ISI_XXSSCFU 01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU. User C is point-to-multipoint Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE 181 181 NOTIFY (UE 1) 181 INVITE INVITE SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE DISC (UE2) BYE BYE BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 137 ISI_XXSSCFU 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is provided with CFU ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). User C is point-to- multipoint. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE 181 MESSAGE 181 MESSAGE NOTIFY (UE 1) 181 SETUP (UE 2) INVITE ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 138 ISI_XXSSCFU 03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed).User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE 181 181 NOTIFY (UE 1) 181 INVITE INVITE SETUP (UE 2) INVITE ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 139 ISI_XXSSCFU 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFU Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFU The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is not notified of call diversion and not informed of the diverted-to number (user C has COLP) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE INVITE INVITE SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 140 ISI_XXSSCFU 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU. User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding unconditional supported user C is user determined user busy Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE 181 181 NOTIFY (UE 1) 181 INVITE INVITE INVITE SETUP (UE 2) RLC (UE 2) 486 Busy here 486 Busy here 486 Busy here DISC (UE 1) 486 Busy here 486 Busy here 486 Busy here REL ACK ACK ACK RLC ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 141 ISI_XXSSCFU 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU. User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding unconditional supported user C is network determined user busy Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE 181 181 NOTIFY (UE 1) 181 INVITE INVITE INVITE 486 Busy here 486 Busy here 486 Busy here DISC (UE 1) 486 Busy here 486 Busy here 486 Busy here REL ACK ACK ACK RLC ACK ACK ACK ISII_XXSSCFU 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFU. User D forwards the call to back to user B. User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 142 SII_XXSSCFU 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFU. User D forwards the call. User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Network option: maximal number of diversions for a single call N= 3 Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, C to D. User D has call forwarding activated. Ensure that the call is released. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 143
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.4.2 CFU - ISS
|
ISS_XXSSCFU 01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2 and 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFU Configuration: The user B is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE INVITE INVITE 181 181 NOTIFY 181 INVITE INVITE 100 Trying 180 180 180 180 180 ALERTING 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 144 ISS_XXSSCFU 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFU Configuration: The user B is provided with CFU ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE 100 Trying INVITE 100 Trying INVITE MESSAGE 100 Trying MESSAGE 181 181 NOTIFY 181 INVITE INVITE 100 Trying 100 Trying 180 180 180 180 180 ALERTING 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 145 ISS_XXSSCFU 03 ISDN reference to: ETSI EN 300 207-1 [i.5] clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFU Configuration: User B is provided with CFU ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = No). Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE INVITE 100 Trying INVITE 100 Trying 181 181 NOTIFY 181 INVITE INVITE 100 Trying 100 Trying 180 180 180 180 180 ALERTING 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 146 ISS_XXSSCFU 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFU Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFU The user A and the user C are in network N1 and user C is provided with COLP. The user B is in network N2 and is provided with CFU ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 100 Trying 100 Trying 180 180 180 180 180 ALERTING 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 147 ISS_XXSSCFU 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 181 181 INVITE NOTIFY 181 INVITE 486 486 486 ACK 486 486 DISC # 17 486 REL ACK RLC ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 148 ISS_XXSSCFU 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 486 486 486 486 DISC # 17 486 REL ACK RLC ACK ACK ACK ACK ISSI_XXSSCFU 09 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU. User D in network N2 forwards the call to back to user B. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and then forwarded to user D. User D forwards the call to back to user B. Ensure that the call is released. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 149 ISSI_XXSSCFU 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP-ISDN/Supplementary_services/CFU Configuration: The user is A in network N1. The user B and the user C are in network N2. User B is provided with CFU. User D forwards the call. Selection criteria: Network option: maximal number of diversions for a single call N=3 Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, C to D. User D has call forwarding activated Ensure that the call is released. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 150
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.5 CFB
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.5.1 CFB - ISI
|
ISI_XXSSCFB 01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB (network determined). User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding busy supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE INVITE 486 486 ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 151 ISI_XXSSCFB 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB (user determined). User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding busy supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 486 486 486 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 152 ISI_XXSSCFB 03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). User C is point-to- multipoint. Selection criteria: Call forwarding by the network Call forwarding busy supported (user determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 486 486 486 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE MESSAGE 100 Trying MESSAGE INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 153 ISI_XXSSCFB 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No). User C is point-to- multipoint. Selection criteria: Call forwarding by the network Call forwarding busy supported (user determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number and user C is informed of the forwarding number (user B has presentation allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 486 486 486 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 154 ISI_XXSSCFB 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = No). User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding Busy supported (user determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 486 486 486 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 155 ISI_XXSSCFB 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFB The user A and the user C are in network N1 and user C is provided with COLP. The user B is in network N2 and is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding busy supported (user determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 486 486 486 ACK ACK ACK INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 156 ISI_XXSSCFB 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding busy supported (network determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 486 486 ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE MESSAGE 100 Trying MESSAGE INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 157 ISI_XXSSCFB 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No). User C is point-to- multipoint. Selection criteria: Call forwarding by the network Call forwarding busy supported (network determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 486 486 ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 158 ISI_XXSSCFB 09 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2 and 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = No). User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding Busy supported (network determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion Ensure that in the active call state (N10) the voice transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 486 486 ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 159 SI_XXSSCFB 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB The user A and the user C are in network N1 and user C is provided with COLP. The user B is in network N2 and is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding busy supported (network determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 486 486 ACK ACK INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 160 ISI_XXSSCFB 12 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with CFB. User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding busy supported user C is user determined user busy Test purpose: To verify that a call is released correctly if CFB was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 486 486 486 ACK ACK ACK INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) RLC (UE 2) 486 Busy here 486 Busy here 486 Busy here ACK ACK ACK 486 Busy here 486 Busy here DISC (UE 1) 486 Busy here REL ACK RLC ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 161 ISI_XXSSCFB 13 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with CFB. User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding busy supported user C is network determined user busy Test purpose: To verify that a call is released correctly if CFB was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 486 486 486 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 486 Busy here 486 Busy here ACK ACK 486 Busy here DISC (UE 1) 486 Busy here REL ACK RLC ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 162
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.5.2 CFB - ISS
|
ISS_XXSSCFB 01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFB Configuration: The user B is provided with CFB Selection criteria: Call forwarding by the network Call forwarding busy supported (user determined) Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE INVITE INVITE INVITE INVITE 486 486 486 ACK ACK ACK NOTIFY (UE 1) 181 181 181 INVITE INVITE INVITE 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK CONNECT 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC (UE1) BYE ACK ACK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 163 ISS_XXSSCFB 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFB Configuration: The user B is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). Selection criteria: Call forwarding by the network Call forwarding busy supported (user determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE INVITE INVITE INVITE INVITE 486 486 486 ACK ACK ACK NOTIFY (UE 1) 181 181 181 INVITE INVITE MESSAGE MESSAGE INVITE 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK CONNECT 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC (UE1) BYE ACK ACK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 164 ISS_XXSSCFB 03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFB Configuration: User B is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). Selection criteria: Call forwarding by the network Call forwarding busy supported (user determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - TIR) and user C is not informed of the forwarding number (user B has presentation not allowed).User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE INVITE INVITE INVITE INVITE 486 486 486 ACK ACK ACK NOTIFY (UE 1) 181 181 181 INVITE INVITE INVITE 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK CONNECT 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC (UE1) BYE ACK ACK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 165 ISS_XXSSCFB 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFB Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFB. The user A and the user C are in network N1. ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). Selection criteria: Call forwarding by the network Call forwarding busy supported (user determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed).User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE INVITE INVITE INVITE INVITE 486 486 486 ACK ACK ACK NOTIFY (UE 1) 181 181 181 INVITE INVITE INVITE 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK CONNECT 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC (UE1) BYE ACK ACK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 166 ISS_XXSSCFB 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFB Configuration: The user B is provided with CFB Selection criteria: Call forwarding by the network Call forwarding busy supported (network determined) Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE INVITE INVITE INVITE 486 486 ACK ACK NOTIFY (UE 1) 181 181 181 INVITE INVITE INVITE 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK CONNECT 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC (UE1) BYE ACK ACK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 167 ISS_XXSSCFB 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFB Configuration: The user B is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). Selection criteria: Call forwarding by the network Call forwarding busy supported (network determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE INVITE INVITE INVITE 486 486 ACK ACK NOTIFY (UE 1) 181 181 181 INVITE MESSAGE INVITE MESSAGE 180 INVITE ALERTING 180 180 180 180 180 200 OK 200 OK 200 OK CONNECT 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC (UE1) BYE ACK ACK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 168 ISS_XXSSCFB 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFB Configuration: User B is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). Selection criteria: Call forwarding by the network Call forwarding busy supported (network determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE INVITE INVITE INVITE INVITE 486 486 486 ACK ACK ACK NOTIFY (UE 1) 181 181 181 INVITE INVITE INVITE 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK CONNECT 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC (UE1) BYE ACK ACK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 169 ISS_XXSSCFB 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFB Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFB. The user A and the user C are in network N1. ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). Selection criteria: Call forwarding by the network Call forwarding busy supported (network determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE INVITE INVITE INVITE 486 486 ACK ACK INVITE INVITE INVITE 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK CONNECT 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC (UE1) BYE ACK ACK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 170 ISS_XXSSCFB 09 ISDN reference to: ETSI EN 300 207-1 [i.5] clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFB Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFB. The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No). Selection criteria: User B has activated the CALL DEFLECTION service Call forwarding busy supported performed by the UE CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 302 302 302 ACK ACK ACK INVITE 100 Trying INVITE INVITE 100 Trying 180 180 180 180 180 ALERTING (UE 1) 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 171 ISS_XXSSCFB 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with CFB Selection criteria: Call forwarding by the network Call forwarding busy supported Test purpose: To verify that a call is released correctly if CFB was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE INVITE INVITE INVITE 486 486 ACK ACK INVITE INVITE INVITE 486 486 ACK 486 DISC # 17 486 486 486 REL ACK ACK ACK RLC ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 172 ISS_XXSSCFB 11 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with CFB Selection criteria: Call forwarding by the network Call forwarding busy supported Test purpose: To verify that a call is released correctly if CFB was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE INVITE INVITE INVITE 486 486 ACK ACK INVITE INVITE 486 486 DISC # 17 486 486 486 REL ACK ACK ACK RLC ACK ACK ISSI_XXSSCFB 14 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU. User D forwards the call to back to user B. Selection criteria: Call forwarding busy by the network Call forwarding busy supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 173 ISSI_XXSSCFB 15 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 129 163 [i.20] TSS reference: ISDN-SIP-SIP-ISDN/Supplementary_services/CFU Configuration: The user is A in network N1. The user B and the user C are in network N2. User B is provided with CFU. User E forwards the call to back to user B. Selection criteria: Network option: hop counter supported N<5 Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, C to D. User D forwards the call to back to user B. User D forwards the call to back to user B. Ensure that the call is released. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments:
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.6 CFNR
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.6.1 CFNR - ISI
|
ISI_XXSSCFNR01 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNR/ Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR. User C is point-to-multipoint. Served user communication retention on invocation of diversion (forwarding or deflection) = No [Clear call to the served user on invocation of call diversion] Selection criteria: CFNR supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 174 Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 180 180 181 181 NOTIFY (UE 1) 181 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK INVITE INVITE 100 Trying SETUP (UE 2) INVITE 100 Trying ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE DISC (UE2) BYE BYE BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 175 ISI_XXSSCFNR02 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNR/ Configuration: The user A and the user C are in network N1. The user B is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes, Served user communication retention on invocation of diversion (forwarding or deflection) = No [Clear call to the served user on invocation of call diversion]. User C is point-to- multipoint. Selection criteria: CFNR supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. User A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 176 Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 180 180 181 181 NOTIFY (UE 1) 181 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK INVITE MESSAGE INVITE MESSAGE 100 Trying SETUP (UE 2) INVITE 100 Trying ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE DISC (UE2) BYE BYE BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 177 ISI_XXSSCFNR 03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no) Served user communication retention on invocation of diversion (forwarding or deflection) = No. User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding not reply supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 178 Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 180 180 181 181 NOTIFY (UE 1) 181 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK INVITE INVITE 100 Trying SETUP (UE 2) INVITE 100 Trying ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE DISC (UE2) BYE BYE BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 179 ISI_XXSSCFNR 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFNR. The user A and the user C are in network N1 and user C is provided with COLP. The user B is in network N2 and is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no); Served user communication retention on invocation of diversion (forwarding or deflection) = No. User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding not reply supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 180 180 ALERTING (UE1) CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK INVITE INVITE 100 Trying SETUP (UE 2) INVITE 100 Trying ALERTING (UE 2) 180 180 180 180 180 180 CONNECT (UE 2) 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE DISC (UE2) BYE BYE BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 180 ISI_XXSSCFNR 05 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNR/ Configuration: The user A and the user C are in network N1. The user B is provided with CFNR Served user communication retention on invocation of diversion (forwarding or deflection) = Yes. User C is point-to-multipoint. Selection criteria: CFNR supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C The diverting user accepts the communication after sending the INVITE request, the communication path towards the diverted to user shall be released according to the rules and procedures in IETF RFC 3261 [28]. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 180 ALERTING (UE1) 180 NOTIFY (UE 1) 181 181 181 INVITE INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK 180 180 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 181 ISI_XXSSCFNR 06 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNR/ Configuration: The user A and the user C are in network N1. The user B is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes, Served user communication retention on invocation of diversion (forwarding or deflection) = Yes. User C is point-to-multipoint. Selection criteria: CFNR supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C The diverting user accepts the communication after sending the INVITE request, the communication path towards the diverted to user shall be released according to the rules and procedures in IETF RFC 3261 [28]. User A is notified of call diversion and informed of the diverted-to number and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion ISDN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 180 ALERTING (UE1) 180 NOTIFY (UE 1) 181 181 181 INVITE INVITE MESSAGE 100 Trying MESSAGE INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK 180 180 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 182 ISI_XXSSCFNR 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no) Served user communication retention on invocation of diversion (forwarding or deflection) = Yes. User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding not reply supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C The diverting user accepts the communication after sending the INVITE request, the communication path towards the diverted to user shall be released according to the rules and procedures in IETF RFC 3261 [28]. User A is notified of call diversion and informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING (UE1) 180 180 NOTIFY (UE 1) 181 181 181 INVITE INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK 180 180 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 183 ISI_XXSSCFNR 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFNR The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no); Served user communication retention on invocation of diversion (forwarding or deflection) = Yes. User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding not reply supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C The diverting user accepts the communication after sending the INVITE request, the communication path towards the diverted to user shall be released according to the rules and procedures in IETF RFC 3261 [28].User A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 184 ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING (UE1) 180 180 NOTIFY (UE 1) 181 181 181 INVITE INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK 180 180 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 185 ISI_XXSSCFNR 09 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR, Served user communication retention on invocation of diversion (forwarding or deflection) = No [Clear call to the served user on invocation of call diversion]. User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding unconditional supported user C is user determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 ALERTING 180 180 180 181 181 NOTIFY (UE 1) 181 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK INVITE INVITE 100 Trying 100 Trying INVITE 100 Trying SETUP (UE 2) RLC (UE 2) 486 Busy here 486 Busy here 486 Busy here DISC (UE 1) 486 Busy here 486 Busy here 486 Busy here REL (UE1) ACK ACK ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 186 ISI_XXSSCFNR 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR, Served user communication retention on invocation of diversion (forwarding or deflection) = No. User C is point-to- multipoint. Selection criteria: Call forwarding by the network CFNR supported user C is network determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 ALERTING 180 180 180 181 181 NOTIFY (UE 1) 181 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK INVITE INVITE 100 Trying 100 Trying INVITE 100 Trying 486 Busy here 486 Busy here 486 Busy here DISC (UE 1) 486 Busy here 486 Busy here 486 Busy here REL (UE1) ACK ACK ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 187 ISI_XXSSCFNR 11 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR, Served user communication retention on invocation of diversion (forwarding or deflection) = Yes. User C is point-to-multipoint. Selection criteria: Call forwarding by the network Call forwarding unconditional supported user C is user determined user busy Test purpose: User A calls user B, the call is forwarded to user C who is user determined user busy. The forwarding user User B continues to alert. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 ALERTING 180 180 180 INVITE INVITE SETUP (UE 2) INVITE RLC (UE 2) 486 Busy here 486 Busy here 486 Busy here ACK ACK ACK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 188 ISI_XXSSCFNR 12 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR, Served user communication retention on invocation of diversion (forwarding or deflection) = Yes. User C is point-to- multipoint. Selection criteria: Call forwarding by the network CFNR supported user C is network determined user busy Test purpose: User A calls user B, the call is forwarded to user C who is network determined user busy. The forwarding user User B continues to alert. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 ALERTING 180 180 180 INVITE INVITE INVITE 486 Busy here 486 Busy here 486 Busy here ACK ACK ACK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK 200 OK 200 OK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 189 ISII_XXSSCFNR 13 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR. User D forwards the call to back to user B. User C is point-to-multipoint. Selection criteria: Call forwarding by the network CFNR supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 190
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.6.2 CFNR - ISS
|
ISS_XXSSCFNR 01 ISDN reference to: ETSI EN 300 207-1 [i.5] clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is provided with CFNR Served user communication retention on invocation of diversion (forwarding or deflection) = No. Selection criteria: Call forwarding by the network CFNR supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C according CFNR procedures. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 181 181 NOTIFY (UE 1) 181 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK INVITE INVITE 100 Trying INVITE 100 Trying 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 191 ISS_XXSSCFNR 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes, Served user communication retention on invocation of diversion (forwarding or deflection) = No. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 181 181 NOTIFY (UE 1) 181 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK INVITE MESSAGE MESSAGE INVITE 100 Trying INVITE 100 Trying 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 192 ISS_XXSSCFNR 03 ISDN reference to: ETSI EN 300 207-1 [i.5] clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = No, Served user communication retention on invocation of diversion (forwarding or deflection) = No. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is not informed of the forwarding number (user B has presentation allowed). User B is not notified of call diversion. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 181 181 NOTIFY (UE 1) 181 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK INVITE INVITE 100 Trying INVITE 100 Trying 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 193 ISS_XXSSCFNR 04 ISDN reference to: ETSI EN 300 207-1 [i.5] clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: User B is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no) Served user communication retention on invocation of diversion (forwarding or deflection) = No. Selection criteria: Call forwarding by the network CFNR supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK INVITE INVITE 100 Trying INVITE 100 Trying 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 194 ISS_XXSSCFNR 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is provided with CFNR Served user communication retention on invocation of diversion (forwarding or deflection) = Yes). Selection criteria: Call forwarding by the network CFNR supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C The diverting user accepts the communication after sending the INVITE request, the communication path towards the diverted to user shall be released according to the rules and procedures in IETF RFC 3261 [28]. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying 180 180 180 ALERTING 180 180 180 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 195 ISS_XXSSCFNR 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes, Served user communication retention on invocation of diversion (forwarding or deflection) = Yes). Selection criteria: Call forwarding by the network CFNR supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C The diverting user accepts the communication after sending the INVITE request, the communication path towards the diverted to user shall be released according to the rules and procedures in IETF RFC 3261 [28]. User A is notified of call diversion and informed of the diverted-to number and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 196 ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE MESSA GE MESSAGE 100 Trying 180 180 180 180 180 180 CANCEL CANCEL CANCEL 487 Request terminat ed 487 Request terminated 487 Request terminated ACK ACK ACK 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 197 ISS_XXSSCFNR 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No, Served user communication retention on invocation of diversion (forwarding or deflection) = Yes). Selection criteria: Call forwarding by the network CFNR supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C The diverting user accepts the communication after sending the INVITE request, the communication path towards the diverted to user shall be released according to the rules and procedures in IETF RFC 3261 [28]. User A is notified of call diversion and informed of the diverted-to number and user C is informed of the forwarding number (user B has presentation allowed). User B is not notified of call diversion. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE MESSAGE MESSAGE 100 Trying 180 180 180 180 180 180 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 198 ISS_XXSSCFNR 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = No, Served user communication retention on invocation of diversion (forwarding or deflection) = Yes). Selection criteria: Call forwarding by the network CFNR supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C The diverting user accepts the communication after sending the INVITE request, the communication path towards the diverted to user shall be released according to the rules and procedures in IETF RFC 3261 [28]. User A is notified of call diversion and informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation allowed). User B is not notified of call diversion. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying 180 180 180 ALERTING 180 180 180 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 199 ISS_XXSSCFNR 09 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: User B is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no) Served user communication retention on invocation of diversion (forwarding or deflection) = Yes). Selection criteria: Call forwarding by the network CFNR supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C The diverting user accepts the communication after sending the INVITE request, the communication path towards the diverted to user shall be released according to the rules and procedures in IETF RFC 3261 [28]. User A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 INVITE 100 Trying INVITE 100 Trying 180 180 180 ALERTING 180 180 180 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 200 ISS_XXSSCFNR 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR Served user communication retention on invocation of diversion (forwarding or deflection) = No [Clear call to the served user on invocation of call diversion], Served user communication retention when forwarding is rejected at forwarded-to user = No action at the forwarding user). Selection criteria: Call forwarding by the network Call forwarding on no reply supported Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated 487 Request terminated ACK ACK ACK INVITE INVITE INVITE 486 486 486 ACK DISC # 17 486 486 486 REL ACK ACK ACK RLC ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 201 ISS_XXSSCFNR 11 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR Served user communication retention on invocation of diversion (forwarding or deflection) = No [Clear call to the served user on invocation of call diversion. Selection criteria: Call forwarding by the network Call forwarding on no reply supported Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 CANCEL CANCEL CANCEL 487 Request terminated 487 Request terminated ACK ACK INVITE INVITE INVITE 486 486 486 DISC # 17 486 486 486 REL ACK ACK ACK RLC ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 202 ISS_XXSSCFNR 12 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR. Served user communication retention on invocation of diversion (forwarding or deflection = Yes ) Selection criteria: Call forwarding by the network Call forwarding on no reply supported Test purpose: User A calls user B, the call is forwarded to user C who is user determined user busy. The forwarding user User B continues to alert. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE INVITE INVITE 180 180 180 180 180 ALERTING 180 181 181 NOTIFY (UE 1) 181 INVITE INVITE INVITE 486 486 486 ACK ACK ACK ACK 200 OK 200 OK 200 OK ACK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 203 ISS_XXSSCFNR 13 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR. Served user communication retention on invocation of diversion (forwarding or deflection) = Yes. Selection criteria: Call forwarding by the network Call forwarding on no reply supported Test purpose: User A calls user B, the call is forwarded to user C who is network determined user busy. The forwarding user User B continues to alert. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE INVITE INVITE 180 180 180 180 180 ALERTING 180 181 181 NOTIFY (UE 1) 181 INVITE INVITE 486 486 ACK ACK 200 OK 200 OK 200 OK ACK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 204 ISSI_XXSSCFNR 14 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user A and the user D are in network N1. The user B and C are in network N2, and user B is provided with CFNR. User D forwards the call to back to user B. Selection criteria: Call forwarding by the network Call forwarding on no reply supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 205
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.7 CFNL
|
ISI_XXSSCFNL 01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/ CFNL Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNL. User C is point-to-multipoint. Selection criteria: Call forwarding by the network CFNL supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE DISC (UE2) BYE BYE BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 206 ISI_XXSSCFNL 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNL Configuration: The user A and the user C are in network N1. The user B is provided with CFNL ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes). User C is point-to-multipoint. Selection criteria: Call forwarding by the network CFNL supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 207 ISI_XXSSCFNL 03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNL Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNL ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No). User C is point-to-multipoint. Selection criteria: Call forwarding by the network CFNL supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 208 ISI_XXSSCFNL 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNL Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNL. The user B is in network N2 and is provided with CFNL ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No). User C is point-to-multipoint. Selection criteria: Call forwarding by the network CFNL supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 209 ISI_XXSSCFNL 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNL Configuration: The user B is in network N2 and is provided with CFNL. User C is point-to-multipoint. Selection criteria: Call forwarding by the network CFNL supported user C is user determined user busy Test purpose: To verify that a call is released correctly if CFNL was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) RLC (UE 2) 486 Busy here 486 Busy here 486 Busy here DISC (UE 1) 486 Busy here 486 Busy here 486 Busy here REL ACK ACK ACK RLC ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 210 ISI_XXSSCFNL 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CFNL Configuration: The user B is in network N2 and is provided with CFNL. User C is point-to-multipoint. Selection criteria: Call forwarding by the network CFNL supported user C is network determined user busy Test purpose: To verify that a call is released correctly if CFNL was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Comments ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 486 Busy here 486 Busy here 486 Busy here DISC (UE 1) 486 Busy here 486 Busy here 486 Busy here REL ACK ACK ACK RLC ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 211 ISS_XXSSCFNL 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNL Configuration: The user B is provided with CFNL. Selection criteria: Call forwarding by the network CFNL supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. ISDN Parameter values: BC = PIXIT SIP Parameter values: Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 181 181 NOTIFY 181 INVITE INVITE 100 Trying 100 Trying 180 180 180 180 180 ALERTING 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 212 ISS_XXSSCFNL 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNL Configuration: The user B is provided with CFNL ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes). Selection criteria: Call forwarding by the network CFNL supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is informed of the forwarding number (user B has presentation allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 181 181 NOTIFY 181 INVITE INVITE 100 Trying 100 Trying 180 180 180 180 180 ALERTING 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 213 ISS_XXSSCFNL 09 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNL Configuration: User B is provided with CFNL ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No). Selection criteria: Call forwarding by the network CFNL supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 181 181 NOTIFY 181 INVITE INVITE 100 Trying 100 Trying 180 180 180 180 180 ALERTING 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 214 ISS_XXSSCFNL 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNL Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNL. The user B is in network N2 and is provided with CFNL ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No). Selection criteria: Call forwarding by the network CFNL supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 100 Trying 100 Trying 180 180 180 180 180 ALERTING 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 215 ISS_XXSSCFNL 11 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNL Configuration: The user B is in network N2 and is provided with CFNL Selection criteria: Call forwarding by the network CFNL supported Test purpose: To verify that a call is released correctly if CFNL was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 181 181 INVITE NOTIFY 181 INVITE 486 486 486 ACK 486 486 DISC # 17 486 REL ACK RLC ACK ACK ACK ACK ISS_XXSSCFNL 12 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/CFNL Configuration: The user B is in network N2 and is provided with CFNL Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: To verify that a call is released correctly if CFNL was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 486 486 486 486 DISC # 17 486 REL ACK RLC ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 216
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.8 CD
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.8.1 Call Deflection-ISI
|
ISI_XXSSCD 01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CD- Immediate response Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CD ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No). User C is point- to-multipoint. Selection criteria: User B has activated the CALL DEFLECTION service Test purpose: Ensure that when user A calls user B, the call is deflected to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE INVITE INVITE 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE INVITE INVITE SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 217 ISI_XXSSCD 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/CD- Immediate response Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CD ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User C is point- to-multipoint. Selection criteria: User B has activated the CALL DEFLECTION service Test purpose: Ensure that when user A calls user B, the call is deflected to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE INVITE INVITE 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE INVITE INVITE SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 218 ISI_XXSSCD 03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/ CD- Immediate response Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CD. The user B is in network N2 and is provided with CD ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User C is point-to-multipoint. Selection criteria: User B has activated the CALL DEFLECTION service Test purpose: Ensure that when user A calls user B, the call is deflected to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE INVITE INVITE 302 302 302 ACK ACK ACK 181 INVITE INVITE SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 219 ISI_XXSSCD 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/ CD- Immediate response Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CD. Selection criteria: User B has activated the CALL DEFLECTION service Test purpose: Ensure that when user A calls user B, the call is deflected to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). User C is point-to-multipoint. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE INVITE INVITE 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE INVITE INVITE SETUP (UE 2) ALERTING (UE 2) 180 180 180 180 180 ALERTING (UE 1) 180 CONNECT (UE 2) 200 OK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK CONNECT (UE 1) 200 OK DISC (UE1) BYE BYE BYE BYE BYE DISC (UE2) BYE REL (UE2) 200 OK BYE RLC (UE2) 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 220 ISI_XXSSCD 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/ CD- Immediate response Configuration: The user B is in network N2 and is provided with CD. User C is point-to-multipoint. Selection criteria: user C is network determined user busy User B has activated the CALL DEFLECTION service Test purpose: To verify that a call is released correctly if CD was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE INVITE 100 Trying 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE INVITE INVITE SETUP (UE 2) RLC (UE 2) 486 Busy here 486 Busy here 486 Busy here DISC (UE 1) 486 Busy here 486 Busy here 486 Busy here REL ACK ACK ACK RLC ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 221 ISI_XXSSCD 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/ CD- Immediate response Configuration: The user B is in network N2 and is provided with CD. User C is point-to-multipoint. Selection criteria: user C is network determined network busy User B has activated the CALL DEFLECTION service Test purpose: To verify that a call is released correctly if CD was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE INVITE INVITE 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE INVITE INVITE 486 Busy here 486 Busy here 486 Busy here DISC (UE 1) 486 Busy here 486 Busy here 486 Busy here REL ACK ACK ACK RLC ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 222 ISI_XXSSCD 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/ CD- during alerting Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CD- during alerting. User C is point-to-multipoint. Selection criteria: User B has activated the CALL DEFLECTION service. Test purpose: Ensure that when user A calls user B, the call is deflected during alerting to user C. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 ALERTING (UE 1) 180 180 180 CONNECT (UE 2) 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE DISC (UE2) BYE BYE BYE REL (UE2) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE2) REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 223 ISI_XXSSCD 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/ CD- during alerting Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CD ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = NO). User C is point-to-multipoint. Selection criteria: User B has activated the CALL DEFLECTION service Test purpose: Ensure that when user A calls user B, the call is deflected during alerting to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 ALERTING (UE 1) 180 180 180 CONNECT (UE 2) 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE DISC (UE2) BYE BYE BYE REL (UE2) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE2) REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 224 ISI_XXSSCD 09 ISDN reference to: ETSI EN 300 207-1 [i.5] clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/ CD- during alerting Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User C is point-to-multipoint. Selection criteria: User B has activated the CALL DEFLECTION service Test purpose: Ensure that when user A calls user B, the call is deflected during alerting to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 ALERTING (UE 1) 180 180 180 CONNECT (UE 2) 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE DISC (UE2) BYE BYE BYE REL (UE2) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE2) REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 225 ISI_XXSSCD 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/ CD- during alerting Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CD- during alerting The user A and the user C are in network N1. The user B is in network N2 and is provided with CD ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User C is point-to-multipoint. Selection criteria: User B has activated the CALL DEFLECTION service Test purpose: Ensure that when user A calls user B, the call is deflected during alerting to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE INVITE 180 180 180 180 ALERTING 180 180 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE INVITE 100 Trying INVITE 100 Trying SETUP (UE 2) ALERTING (UE 2) 180 180 180 ALERTING (UE 1) 180 180 180 CONNECT (UE 2) 200 OK 200 OK 200 OK CONNECT (UE 1) 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE DISC (UE2) BYE BYE BYE REL (UE2) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE2) REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 226
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.8.2 CD-ISS
|
ISS_XXSSCD 01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/ CD- Immediate response Configuration: The user B is provided with CD- Immediate response. Selection criteria: User B has activated the CALL DEFLECTION service. Test purpose: Ensure that when user A calls user B, the call is deflected immediate response to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE INVITE 100 Trying 180 180 180 180 180 ALERTING (UE 1) 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 227 ISS_XXSSCD 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/ CD- Immediate response Configuration: The user B is provided with CD- Immediate response ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes). Selection criteria: User B has activated the CALL DEFLECTION service. Test purpose: Ensure that when user A calls user B, the call is deflected immediate response to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE MESSAGE 100 Trying MESSAGE INVITE INVITE 100 Trying 180 180 180 180 180 ALERTING (UE 1) 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 228 ISS_XXSSCD 03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/ CD- Immediate response Configuration: The user B is provided with CD- Immediate response ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No). Selection criteria: User B has activated the CALL DEFLECTION service. Test purpose: Ensure that when user A calls user B, the call is deflected immediate response to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE INVITE 100 Trying 180 180 180 180 180 ALERTING (UE 1) 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 229 ISS_XXSSCD 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-ISDN/Supplementary_services/ CD- Immediate response Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CD- Immediate response. The user B is in network N2 and is provided with CD- Immediate response ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No). Selection criteria: User B has activated the CALL DEFLECTION service CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is deflected immediate response to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE 100 Trying INVITE INVITE 100 Trying 180 180 180 180 180 ALERTING (UE 1) 180 200 OK 200 OK 200 OK 200 OK 200 OK CONNECT 200 OK ACK ACK ACK ACK ACK ACK DISC BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE REL 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 230 ISS_XXSSCD 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/ CD- Immediate response Configuration: The user B is in network N2 and is provided with CD- Immediate response Selection criteria: Call forwarding by the network User B has activated the CALL DEFLECTION service Test purpose: To verify that a call is released correctly if CD- Immediate response was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE INVITE INVITE 180 180 180 ALERTING 180 180 180 302 302 302 ACK ACK ACK 181 181 NOTIFY. (UE 1) 181 INVITE INVITE INVITE 486 486 486 ACK 486 486 DISC # 17 486 REL ACK ACK ACK RLC ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 231 ISS_XXSSCD 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/ CD- during alerting Configuration: The user B is provided with CFNR - CALL DEFLECTION Selection criteria: User B has activated the CALL DEFLECTION service Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE INVITE INVITE INVITE 180 180 180 ALERTING 180 180 180 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE INVITE INVITE 100 Trying 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK CONNECT 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 232 ISS_XXSSCD 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/ CD- during alerting Configuration: The user B is provided with CD- during alerting ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No). Selection criteria: User B has activated the CALL DEFLECTION service. Test purpose: Ensure that when user A calls user B, the call is deflected during alerting to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE INVITE INVITE INVITE 180 180 180 ALERTING 180 180 180 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE INVITE MESSAGE MESSAGE INVITE 100 Trying 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK CONNECT 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 233 ISS_XXSSCD 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/ CD- during alerting Configuration: The user B is provided with CD- during alerting ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). Selection criteria: User B has activated the CALL DEFLECTION service. Test purpose: Ensure that when user A calls user B, the call is deflected during alerting to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE INVITE INVITE INVITE 180 180 180 ALERTING 180 180 180 302 302 302 ACK ACK ACK 181 181 NOTIFY (UE 1) 181 INVITE INVITE INVITE 100 Trying 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK CONNECT 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 234 ISS_XXSSCD 09 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/ CD- during alerting Configuration: The user B is provided with CD- during alerting ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). Selection criteria: User B has activated the CALL DEFLECTION service. Test purpose: Ensure that when user A calls user B, the call is deflected during alerting to user C, user A is notified of call diversion and not informed of the diverted-to number and user C is not informed of the forwarding number (user B has presentation not allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE 100 Trying INVITE INVITE INVITE INVITE 180 180 180 ALERTING 180 180 180 302 302 302 ACK ACK ACK INVITE INVITE INVITE 100 Trying 180 180 180 ALERTING 180 180 180 200 OK 200 OK 200 OK CONNECT 200 OK 200 OK 200 OK ACK ACK ACK ACK ACK ACK DISC (UE1) BYE BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE REL (UE1) 200 OK BYE 200 OK BYE 200 OK BYE RLC (UE1) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 235 ISS_XXSSCD 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: ISDN-SIP-SIP/Supplementary_services/ CD- during alerting Configuration: The user B is in network N2 and is provided with CD- during alerting Selection criteria: User B has activated the CALL DEFLECTION service Test purpose: To verify that a call is released correctly if CD- during alerting was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN MGCF I-CSCF S-CSCF AS P-CSCF UE-B UE-C SETUP (UE 1) INVITE INVITE INVITE INVITE INVITE INVITE 180 180 180 ALERTING 180 180 180 302 302 302 ACK ACK ACK 181 181 NOTIFY . (UE 1) 181 INVITE INVITE 486 486 486 486 DISC # 17 486 REL ACK ACK ACK RLC ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 236
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.9 3PTY
|
ISI_XXSS3PTY01 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: ISDN-SIP-ISDN/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N1. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and release the Active-Idle connection (A-C). After the completion of the Retrieve function, the call clearing procedure is performed from user A. ISDN Parameter values: BC = PIXIT Comments: UE A (ISDN) UE B (SIP) UE C (ISDN) SETUP(CRx) INVITE ALERTING 180 Ringing CONNECT 200 OK ACK HOLD(CRx) INVITE(sendonly) 200 OK(recvonly) ACK SETUP(CRy) SETUP ALERTING ALERTING CONNECT CONNECT FAC(3PTY_begin_invoke, CRx) INVITE(sendrecv) FAC(3PTY_begin_ret_res, CRx) 200 OK(sendrecv) ACK NOTIFY(conf est) 3 Party conversation DISC(CRy) INVITE(sendonly) DISC RELEASE 200 OK(recvonly) RELEASE REL COMP ACK REL COMP RETRIEVE (CRx) INVITE(sendrecv) 200 OK(sendrecv) ACK Conversation DISC(CRx) BYE RELEASE 200 OK REL COMP ISI_XXSS3PTY02 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2, figure A.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: ISDN-SIP-ISDN/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N1. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and release the Active-Held connection (A-B). The call clearing procedure is performed from user A. ISDN Parameter values: BC = PIXIT Comments: User A calls user B (with CRx). After initiating of call hold, the call A-B has an Active-Held connection. User A is calling user C (with the CRy). The call (A-C) has an Active-Idle connection. When user A sends a FACILITY message for CRx containing a facility IE with a Begin3PTY invoke component the network shall respond with a FACILITY message containing a facility IE with a Begin3PTY return result component for CRx. User C shall receive a NOTIFY message containing a Notification Indicator IE with a notification description of "Conference established". The three-way bridge is established. On receipt of a DISCONNECT message from the user A relating to the Active-Held connection (CRx) the network shall clear the call to user B. After the release of the three- way bridge the network is sending to the remote user C a NOTIFY message containing a Notification indicator IE with a notification description of "Conference disconnected". The call A-C has an Active-Idle connection. The call clearing procedure is performed from user A with a DISCONNECT message. ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 237 ISI_XXSS3PTY03 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: ISDN-SIP-ISDN/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N1. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and user B sends disconnect during the Three-Party communication. ISDN Parameter values: BC = PIXIT Comments: ISI_XXSS3PTY04 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: Figure 2-9 of ITU-T Q.734.2 [15] - User C disconnects TSS reference: ISDN-SIP-ISDN/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N1. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and user C sends disconnect during the Three-Party communication. ISDN Parameter values: BC = PIXIT Comments: ISI_XXSS3PTY05 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: ISDN-SIP-ISDN/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N1. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and release of both remote users, user C is released first. ISDN Parameter values: BC = speech Comments: User A calls user B (with CRx). After initiating of call hold, the call A-B has an Active-Held connection. User A is calling user C (with the CRy). The call (A-C) has an Active-Idle connection. When user A sends a FACILITY message for CRx containing a facility IE with a Begin3PTY invoke component the network shall respond with a FACILITY message containing a facility IE with a Begin3PTY return result component for CRx. User C receives a NOTIFY message containing a Notification Indicator IE with a notification description of "Conference established". The three-way bridge is established. On receipt of a DISCONNECT message from the user A relating to the Active-Idle connection (CRy) the network shall clear the call to user C with a DISCONNECT message. On receipt of a DISCONNECT message from the user A relating to the Active-Held connection (CRx) the network shall clear the call to user B. ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 238 ISI_XXSS3PTY06 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N1. Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N1. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and create a private communication with user B. The call clearing procedure is performed from user A ISDN Parameter values: BC = speech Comments: User A calls user B (with CRx). After initiating of call hold, the call A-B has an Active-Held connection. User A is calling user C (with the CRy). The call (A-C) has an Active-Idle connection. When user A sends a FACILITY message for CRx containing a facility IE with a Begin3PTY invoke component the network shall respond with a FACILITY message containing a facility IE with a Begin3PTY return result component for CRx. User B an C receive a NOTIFY message containing a Notification Indicator IE with a notification description of "Conference established". The three-way bridge is established. The served user shall send an End3PTY invoke component to the network in a FACILITY message with that CRx. On receiving such an invoke component in a FACILITY message, the network shall: i) remove the three-way bridge from both the Active-Idle connection and the Active-Held connection; ii) release the three-way bridge; iii) return to the served user an End3PTY return result component, within a FACILITY message using the CRx of the Active-Held connection; iv) send a NOTIFY message to the remote user with which private communication is required containing a Notification indicator information element with a notification description of "Remote hold"; and, v) send a NOTIFY message to the other remote user containing a Notification indicator information element with a notification description of "Conference disconnected". When the served user receives a correctly encoded End3PTY return result component, within a FACILITY message, the user shall accept the provided information and shall: i) use the CR relating to the Active-Idle connection, perform the Hold function; ii) use the CR relating to the Active-Held connection, perform the Retrieve function. The network shall complete the Hold and Retrieve functions. On successful completion of the Hold function (i.e. the HOLD ACKNOWLEDGE message is sent) the network shall send a NOTIFY message, to the remote user that is not to be included in the private communication, containing a Notification indicator information element with a notification description of "Remote hold". On successful completion of the Retrieve function (i.e. RETRIEVE ACKNOWLEDGE message is sent) the network shall send a NOTIFY message, to the remote user for whom private communication is desired, containing a Notification indicator information element with a notification description of "Conference disconnected". (A Notification indicator information element with a notification description of "Remote retrieval" is not sent to the remote user under these circumstances.) As a result of the procedures of this item of this clause, the call state of the connections, at both the network and the served user, is unchanged. The auxiliary state of the connection of the private communication changes from Call Held to Idle. The auxiliary state of the other connection changes from Idle to Call Held. The call clearing procedure is performed from user A with a DISCONNECT message. ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 239 ISI_XXSS3PTY07 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: ISDN-SIP-ISDN/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N1. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and create a private communication with user C. The call clearing procedure is performed from user A. ISDN Parameter values: BC = speech Comments: User A calls user B (with CRx). After initiating of call hold, the call A-B has an Active-Held connection. User A is calling user C (with the CRy). The call (A-C) has an Active-Idle connection. When user A sends a FACILITY message for CRx containing a facility IE with a Begin3PTY invoke component the network shall respond with a FACILITY message containing a facility IE with a Begin3PTY return result component for CRx. User C receives a NOTIFY message containing a Notification Indicator IE with a notification description of "Conference established". The three-way bridge is established. If the remote user, for which a private communication is required, is identified at the served user by the CRy relating to the Active-Idle connection, the served user shall send an End3PTY invoke component to the network in a FACILITY message with that CRy. On receiving such an invoke component in a FACILITY message, the network shall: i) remove the three-way bridge from both the Active-Idle connection and the Active-Held connection; ii) release the three-way bridge; iii) return to the served user an End3PTY return result component, within a FACILITY message, using the CRy of the Active-Idle connection; iv) send a NOTIFY message to both remote users containing a Notification indicator information element with a notification description of "Conference disconnected"; and, v) send to the remote user for which private communication is not required, either in the same NOTIFY message as (iv), or in a subsequent NOTIFY message, a Notification indicator information element with a notification description of "Remote hold". If any intervening protocol between the network of the served user and the network of the remote user does not support transmission of two notification descriptions in the same message, then this should be mapped at that point to a message containing a single notification description of "Conference disconnected", and a subsequent message containing a notification description of "Remote hold". When the served user receives a correctly encoded End3PTY return result component, within a FACILITY message, the user shall accept the provided information and take no further action. As a result of the procedures of this item of this clause, the call state and the auxiliary state of the connections, at both the network and the served user, are unchanged. The call clearing procedure is performed from user A with a DISCONNECT message. ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 240 ISS_XXSS3PTY08 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: ISDN-SIP-SIP/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N2. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and release the Active-Idle connection (A-C). After the completion of the Retrieve function, the call clearing procedure is performed from user A. ISDN Parameter values: BC = PIXIT Comments: UE A (ISDN) UE B (SIP) UE C (SIP) SETUP(CRx) INVITE ALERTING 180 Ringing CONNECT 200 OK HOLD(CRx) INVITE(sendonly) 200 OK(recvonly) SETUP(CRy) INVITE ALERTING 180 Ringing CONNECT 200 OK FAC(3PTY_begin_invoke, CRx) INVITE(sendrecv) DISC(3PTY_begin_ret_res, CRx) 200 OK(sendrecv) 3 Party conversation DISC(CRy) INVITE(sendonly) BYE RELEASE 200 OK(recvonly) 200 OK REL COMP RETRIVE INVITE(sendrecv) 200 OK(sendrecv) DISC(CRx) BYE RELEASE 200 OK REL COMP ISS_XXSS3PTY09 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2, figure A.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: ISDN-SIP-SIP/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N2. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and release the Active-Held connection (A-B). The call clearing procedure is performed from user A. ISDN Parameter values: BC = PIXIT Comments: ISS_XXSS3PTY10 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: ISDN-SIP-SIP/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N2. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and user B sends disconnect during the Three-Party communication. ISDN Parameter values: BC = PIXIT Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 241 ISS_XXSS3PTY11 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: ISDN-SIP-SIP/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B and user C are network N2. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and user C sends disconnect during the Three-Party communication. ISDN Parameter values: BC = PIXIT Comments: ISS_XXSS3PTY12 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: ISDN-SIP-SIP/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N2. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and release of both remote users, user C is released first. ISDN Parameter values: BC = speech Comments: ISS_XXSS3PTY13 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: ISDN-SIP-SIP/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B is in network N2 user C in the network N2 Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and create a private communication with user B. The call clearing procedure is performed from user A. ISDN Parameter values: BC = speech Comments: ISS_XXSS3PTY14 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI EN 383 001 [49] TSS reference: ISDN-SIP-SIP/Supplementary_services/3PTY Selection criteria: The user A is in network N1 and is provided with 3PTY. The user B and user C are network N2. Test purpose: Ensure that user A can establish a three-way conversation call with user B and user C and create a private communication with user C. The call clearing procedure is performed from user A. ISDN Parameter values: BC = speech Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 242
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.10 HOLD
|
IS_SPSSHOLD 01 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 141-1 [i.7] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] TSS reference: ISDN-SIP/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams ISDN selection criteria: Support the generic notification procedure for HOLD supplementary service Test purpose: Ensure that a party can put the other party on hold at any time after the call is answered and before call clearing has begun. Ensure that a party can retrieve the call previously put on hold. The calling party should be able to put the other party on hold The calling party should be able to retrieve the other party The called party should be able to put the other party on hold The called party should be able to retrieve the other party SIP Parameter values: SDP: a=sendonly (put on hold) a=sendrecv or omitted (retrieve the call) o= . . <version incremented> ISDN Parameter values: Comments: ISDN MGCF SIP SETUP INVITE ALERT 180 Ringing CONNECT 200 OK INVITE HOLD INVITE(sendonly) 200 OK INVITE(recvonly) RETRIEVE INVITE(sendrecv) 200 OK INVITE(sendrecv) NOTIFY(HOLD) INVITE(sendonly) 200 OK INVITE(recvonly) NOTIFY(RETRIEVE) INVITE(sendrecv) 200 OK INVITE(sendrecv) IS_SPSSHOLD 02 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 141-1 [i.7] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] TSS reference: ISDN-SIP/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams Support the invocation of the service in the alerting state ISDN selection criteria: Support the generic notification procedure for HOLD supplementary service Test purpose: Ensure that a party can put the other party on hold in the alerting state. Ensure that the party can retrieve the call previously put on hold. The calling party should be able to put the other party on hold The calling party should be able to retrieve the other party SIP Parameter values: SDP: a=sendonly (put on hold) a=sendrecv or omitted (retrieve the call) o= . . <version incremented> ISDN Parameter values: Comments: ISDN MGCF SIP SETUP INVITE ALERTING 180 Ringing HOLD UPDATE(sendonly) 200 OK UPDATE(recevonly) RETRIEVE UPDATE(sendrecv) 200 OK UPDATE(sendrecv) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 243 IS_SPSSHOLD 03 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 141-1 [i.7] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] TSS reference: ISDN-SIP/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams ISDN selection criteria: Support the generic notification procedure for HOLD supplementary service Test purpose: Ensure that a party can put the other party on hold after the calling user has provided all of the information necessary for processing the call. Ensure that the party can retrieve the call previously put on hold. The calling party should be able to put the other party on hold The calling party should be able to retrieve the other party SIP Parameter values: SDP: a=sendonly (put on hold) a=sendrecv or omitted (retrieve the call) o= . . <version incremented> ISDN Parameter values: Comments: ISDN MGCF SIP SETUP INVITE HOLD UPDATE(sendonly) 200 OK UPDATE(recevonly) RETRIEVE UPDATE(sendrecv) 200 OK UPDATE(sendrecv) ALERTING 180 Ringing CONNECT 200 OK INVITE IS_SPSSHOLD 04 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 141-1 [i.7] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] TSS reference: ISDN-SIP/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams The MGCF sends the update of the media stream in an UPDATE message ISDN selection criteria: Support the generic notification procedure for HOLD supplementary service Test purpose: Ensure that a party can put the other party on hold in the confirmed state using an UPDATE request. Ensure that the party can retrieve the call previously put on hold. The calling party should be able to put the other party on hold The calling party should be able to retrieve the other party SIP Parameter values: SDP: a=sendonly (put on hold) a=sendrecv or omitted (retrieve the call) o= . . <version incremented> ISDN Parameter values: FACILITY: Generic notification: remote hold Event indicator PROGRESS (put on hold) Generic notification: remote retrieval event indicator PROGRESS (retrieve the call) Comments: ISDN MGCF SIP SETUP INVITE ALERTING 180 Ringing CONNECT 200 OK INVITE HOLD UPDATE(sendonly) 200 OK UPDATE(recevonly) RETRIEVE UPDATE(sendrecv) 200 OK UPDATE(sendrecv) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 244 IS_SPSSHOLD 05 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 141-1 [i.7] NGN reference to: ETSI EN 383 001 [49] ETSI TS 129 163 [i.20] TSS reference: ISDN-SIP/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams ISDN selection criteria: Support the generic notification procedure for HOLD supplementary service Test purpose: Ensure that a party can put the other party on hold at any time after the call is answered and before call clearing has begun. Ensure that a party can retrieve the call previously put on hold. The calling party should be able to put the other party on hold The called party should be able to put the other party on hold The calling party should be able to retrieve the other party The called party should be able to retrieve the other party SIP Parameter values: SDP: a=sendonly (put on hold) a=sendrecv or omitted (retrieve the call) o= . . <version incremented> ISDN Parameter values: Comments: ISDN MGCF SIP SETUP INVITE ALERTING 180 Ringing CONNECT 200 OK INVITE HOLD INVITE(sendonly) 200 OK INVITE(recvonly) NOTIFY Remote HOLD INVITE(inactive) 200 OK INVITE(inactive) RETRIEVE INVITE(recvonly) 200 OK INVITE(sendonly) NOTIFY Remote RETRIEVAL INVITE(sendrecv) 200 OK INVITE(sendrecv) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 245 IS_SPSSHOLD 06 ISDN reference to: ETSI EN 300 403-1 [i.3], ETSI EN 300 141-1 [i.7] NGN reference to: ETSI EN 383 001 [49], ETSI TS 129 163 [i.20] TSS reference: ISDN-SIP/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams ISDN selection criteria: Support the generic notification procedure for HOLD supplementary service Test purpose: Ensure that a party can put the other party on hold at any time after the call is answered and before call clearing has begun. Ensure that a party can retrieve the call previously put on hold. The calling party should be able to put the other party on hold The called party should be able to put the other party on hold The called party should be able to retrieve the other party The calling party should be able to retrieve the other party SIP Parameter values: SDP: a=sendonly (put on hold) a=sendrecv or omitted (retrieve the call) o= . . <version incremented> ISDN Parameter values: Comments: ISDN MGCF SIP SETUP INVITE ALERTING 180 Ringing CONNECT 200 OK INVITE HOLD INVITE(sendonly) 200 OK INVITE(recvonly) NOTIFY- Remote HOLD INVITE(inactive) 200 OK INVITE(inactive) NOTIFY - Remote RETRIEVAL INVITE(recvonly) 200 OK INVITE(sendonly) RETRIEVE INVITE(sendrecv) 200 OK INVITE(sendrecv)
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.11 CONF (Outgoing Call)
|
IS_SPSSCONF01 ISDN reference to: ETSI EN 300 403-1 [i.3], ETSI EN 300 185-1 [i.8] NGN reference: ETSI TS 124 605 [46], ETSI TS 129 163 [i.20], clause 7.4.14 TSS reference: ISDN-SIP/SS/CONF/ SIP selection criteria: ISDN selection criteria: SUPPORT OF SERVICE CONFERENCE CALL, ADD-ON (CONF) Test purpose: Ensure that the SUT in the confirmed dialogue can establish a conference SIP Parameter values: ISDN Parameter values: Comments: ISDN MGCF SIP SETUP INVITE ALERTING 180 Ringing CONNECT 200 OK INVITE BeginCONF DISC BYE RELEASE 200 OK BYE REL_COMP ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 246 IS_SPSSCONF03 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 185-1 [i.8] NGN reference: ETSI TS 124 605 [46] ETSI TS 129 163 [i.20], clause 7.4.14 TSS reference: ISDN-SIP/SS/CONF/ SIP selection criteria: ISDN selection criteria: SUPPORT OF SERVICE CONFERENCE CALL, ADD-ON (CONF) Test purpose: Ensure that the SUT in the confirmed dialogue can establish a conference, can isolate a party and reattach this party SIP Parameter values: SDP: a= a_LINE_VA (table 5) or a line is omitted ISDN Parameter values: Comments: ISDN MGCF SIP SETUP INVITE ALERTING 180 Ringing CONNECT 200 OK INVITE BeginCONF IsolatedCONF INVITE(sendonly) 200 OK INVITE(recvonly ACK ReattachCONF INVITE(sendrecv) 200 OK INVITE(sendrecv) ACK DISC BYE RELEASE 200 OK BYE REL_COMP IS_SPSSCONF05 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 185-1 [i.8] NGN reference: ETSI TS 124 605 [46] ETSI TS 124 605 [46], clause 7.4.1.1.1 TSS reference: ISDN-SIP/SS/CONF/ SIP selection criteria: Conference event package supported ISDN selection criteria: Test purpose: Conference notification information is mapped into "conference established" Upon the receipt of a conference information document with the <conference-state- type> element active is set to 'true', the ISDN Network shall send a NOTIFY message 'conference established'. SIP Parameter values: NOTIFY 1: <conference-state> <active>true</active> if present ISDN Parameter values: AddCONF Comments: ISDN MGCF SIP SETUP INVITE ALERTING 180 Ringing CONNECT 200 OK INVITE NOTIFY(conference established) NOTIFY 1 200 OK NOTIFY REL BYE RLC 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 247 IS_SPSSCONF06 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 185-1 [i.8] NGN reference: ETSI TS 124 605 [46] ETSI TS 124 605 [46], clause 7.4.1.1.1 TSS reference: ISDN-SIP/SS/CONF/ SIP selection criteria: Conference event package supported ISDN selection criteria: Test purpose: Conference notification information is mapped into "other party added" Upon the receipt of a conference information document with the <endpoint-type> and the element status of endpoint-status-type is set to 'connected' and it was not set to 'on-hold' before and the Contact URI in the element entity is not the address of the served PSTN/ISDN participant, the ISDN Network shall send a NOTIFY message 'other party added'. SIP Parameter values: NOTIFY 1: <conference-state> <active>true</active> if present NOTIFY 2: <endpoint entity=endpoint SIPx URI <status>connected</status> ISDN Parameter values: FACILITY(other party added) Comments: ISDN MGCF SIP SETUP INVITE ALERTING 180 Ringing CONNECT 200 OK INVITE NOTIFY(conference established) NOTIFY 1 200 OK NOTIFY NOTIFY(other party added) NOTIFY 2 200 OK NOTIFY REL BYE RLC 200 OK BYE The connection to SIP2 is not shown in the message flow. ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 248 IS_SPSSCONF11 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 185-1 [i.8] NGN reference: ETSI TS 124 605 [46], clause 7.4.1.1.1 TSS reference: ISDN-SIP/SS/CONF/ SIP selection criteria: Conference event package supported ISDN selection criteria: Test purpose: Conference notification information is mapped into "other party disconnected" Upon the receipt of a conference information document with the <endpoint-type> and the element status of endpoint-status-type is set to 'disconnected' and the element joining-method of joining-type is not set to 'focus-owner, the ISDN network shall send a NOTIFY message 'other party disconnected'. SIP Parameter values: NOTIFY 3: <endpoint entity=endpoint SIPx URI <status>disconnected</status> Comments: ISDN MG CF SIP SETUP INVITE ALERTING 180 Ringing CONNECT 200 OK INVITE NOTIFY(conference established) NOTIFY 1 200 OK NOTIFY NOTIFY(other party added) NOTIFY 2 200 OK NOTIFY NOTIFY(other party disconnected) NOTIFY 3 200 OK NOTIFY REL BYE RLC 200 OK BYE The connection to SIP2 is not shown in the message flow. IS_SPSSCONF12 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 185-1 [i.8] NGN reference: ETSI TS 124 605 [46], clause 7.4.14 TSS reference: ISDN-SIP/SS/CONF/ SIP selection criteria: The temporarily stops sending one or more unicast media streams is not supported ISDN selection criteria: SUPPORT OF SERVICE CONFERENCE CALL, ADD-ON (CONF) Test purpose: Ensure that the SUT on receipt of FACILITY messages due to the CONF supplementary service, no mapping, no disrupting of the SIP procedure. SIP Parameter values: ISDN Parameter values: Comments: ISDN MGCF SIP SETUP INVITE ALERTING 180 Ringing CONNECT 200 OK INVITE HOLD BeginCONF IsolatedCONF ReattachCONF REL BYE RLC 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 249 IS_SPSSCONF13 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 185-1 [i.8] NGN reference: ETSI TS 124 605 [46], clause 7.4.1.1.1 TSS reference: ISDN-SIP/SS/CONF/ SIP selection criteria: Conference event package not supported ISDN selection criteria: Test purpose: Conference notification information is not mapped to ISDN Upon the receipt of a conference information document the conference notification information is not mapped to the PSTN side. No NOTIFY is sent to the ISDN user. SIP Parameter values: NOTIFY 1: <conference-state> <active>true</active> if present NOTIFY 2: <endpoint entity=endpoint SIPx URI <status>connected</status> ISDN Parameter values: Comments: ISDN MGCF SIP SETUP INVITE ALERTING 180 Ringing CONNECT 200 OK INVITE NOTIFY 1 200 OK NOTIFY NOTIFY 2 200 OK NOTIFY REL BYE RLC 200 OK BYE The connection to SIP2 is not shown in the message flow. IS_SPSSCONF14 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 185-1 [i.8] NGN reference: ETSI TS 124 605 [46], clause 7.4.1.1.1 TSS reference: ISDN-SIP/SS/CONF/ SIP selection criteria: ISDN selection criteria: Test purpose: The referring of MGCF is not possible a call is established Ensure that a REFER request received by the MGCF is not successful. The request is rejected with . 403 Forbidden. The CS -site is not affected. SIP Parameter values: REFER: Request URI contained the conference URI Refer-To contains the URI of ISDNx, method=invite Referred-By contains SIP or tel URI of SIPx ISDN Parameter values: AddCONF Comments: ISDN MGCF SIP SETUP INVITE ALERTING 180 Ringing CONNECT 200 OK INVITE REFER 403 Forbidden ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 250
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3 Test purposes for SIP-ISDN
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.1 Basic Call
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.1.1 Test purposes for SIP-ISDN, Basic call, Successful 3,1 kHz audio
|
SI_AU_01 ISDN reference to: ETSI EN 300 403-1 [i.3],clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51] clauses 6.1.1, 6.1.3 ETSI EN 383 001 [49], clauses 6.1.1, 6.1.3 ETSI TS 129 163 [i.20] TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: INVITE received without an SDP offer; not ETSI TS 129 163 [i.20] Test purpose: Ensure that call establishment, upon receipt of the first INVITE with sufficient digits, without an SDP offer and reliable provisional responses is supported, is performed correctly. ISDN Parameter values: SETUP = 3,1 kHz audio SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN SUT SIP INVITE 183 Session Progress offer 1 PRACK answer 1 200 OK PRACK SETUP 180 Ringing ALERT PRACK 200 OK PRACK 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 251 SI_AU_02 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clauses 6.1.1, 6.1.3 ETSI EN 383 001 [49], clauses 6.1.1, 6.1.3 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: INVITE received without an SDP offer; not TS 129 163 [i.20] Test purpose: Ensure that call establishment with an INVITE which does not contain an SDP offer and reliable provisional responses is not supported, is performed correctly. ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN SUT SIP INVITE 200 OK INVITE offer 1 SETUP PRACK answer 1 CON ACK answer 1 BYE DISC 200 OK BYE REL SI_AU_03 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clauses 6.1.2, 6.1.3 ETSI EN 383 001 [49], clauses 6.1.1, 6.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: INVITE received with an SDP offer. Test purpose: Ensure that call establishment with an INVITE which contains an SDP offer is performed correctly. ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 252 Comments: ISDN SUT SIP A) Without SDP pre-condition INVITE SDP SETUP 100 Trying 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL B) ETSI TS 129 163 [i.20] (pre-condition and 100 rel ) INVITE SDP 100 Trying 183 Session Progress SDP PRACK 200 OK PRACK UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERT PRACK 200 OK PRACK 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL SI_AU_04 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3 ETSI EN 383 001 [49], clause 6.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: Test purpose: Ensure that call establishment and the mapping of the a = line b=line and m =line parameters defined in table 5 between INVITE message and the SETUP message is performed correctly. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT- table 5) b = line (PIXIT - table 5) m = line (PIXIT - table 5) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 253 Comments: ISDN SUT SIP A) Without SDP pre-condition INVITE SETUP 100 Trying 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL b) ETSI TS 129 163 [i.20] (pre-condition met) INVITE SDP 100 Trying 183 Session Progress SDP PRACK 200 OK PRACK UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERT PRACK 200 OK PRACK 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL SI_AU_04A ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.5 ETSI EN 383 001 [49], clause 6.5 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: ISDN = point to point Configuration: with DDI; P-Early-Media Header is supported Test purpose: Ensure that the SIP user receives a 183 Session Progress message when the ISDN User in call state U03 is sending a Call Proceeding message. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). Ensure that in the Call Delivered call state U4 the transfer of tone or announcement on the media channel is performed correctly. In case when the parameter in the SDP rtpmap:<dynamic-PT> is used the codecs in table 6 applies. ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT- table 6) b = line (PIXIT - table 6) m = line (PIXIT - table 6) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 254 Comments: ISDN SUT SIP a) Without SDP pre-condition INVITE SETUP 183 Session Progress Including the P-Early-Media Header CALL PROCEEDING PI#8 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL b) ETSI TS 129 163 [i.20] (pre-condition met ) INVITE SDP 100 Trying 183 Session Progress SDP PRACK 200 OK PRACK UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERT PRACK 200 OK PRACK 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL SI_AU_05 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.5 ETSI EN 383 001 [49], clause 6.5 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: ISDN = point to point Configuration: with DDI Test purpose: Ensure that the SIP user receives a 180 Ringing message when the ISDN User in call state U07 is sending an ALERTING message. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). Ensure that in the Call Delivered call state U4 the transfer of tone or announcement on the media channel is performed correctly. In case when the parameter in the SDP rtpmap:<dynamic-PT> is used the codecs in table 6 applies. ISDN Parameter values: SETUP = 3,1 kHz audio SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT - table 6) b = line (PIXIT - table 6) m = line (PIXIT - table 6) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 255 Comments: ISDN SUT SIP a) Without SDP pre-condition INVITE SETUP 100 Trying 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL b) ETSI TS 129 163 [i.20] (pre-condition met ) INVITE SDP 100 Trying 183 Session Progress SDP PRACK 200 OK PRACK UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERT PRACK 200 OK PRACK 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL SI_AU_05A ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.5 ETSI EN 383 001 [49], clause 6.5 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: ISDN = point to point Configuration: with DDI P-Early-Media Header is supported Test purpose: Ensure that the SIP user receives a 180 Ringing message when the ISDN User in call state U07 is sending an ALERTING message. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). Ensure that in the Call Delivered call state U4 the transfer of tone or announcement on the media channel is performed correctly. In case when the parameter in the SDP rtpmap:<dynamic-PT> is used the codecs in table 6 applies. ISDN Parameter values: SETUP = 3,1 kHz audio SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT- table 6) b = line (PIXIT - table 6) m = line (PIXIT - table 6) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 256 ISDN SUT SIP a) Without SDP pre-condition INVITE SETUP 100 Trying 180 Ringing Including the P-Early-Media Header ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL b) ETSI TS 129 163 [i.20] (pre-condition met ) INVITE SDP 100 Trying 183 Session Progress SDP PRACK 200 OK PRACK UPDATE 200 OK (UPDATE) SETUP 180 Ringing Including the P-Early-Media Header ALERT PI#8 PRACK 200 OK PRACK 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL SI_AU_07 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.5 ETSI EN 383 001 [49], clause 6.5 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: Test purpose: Ensure that SIP user receives a 180 Ringing message when the ISDN User in call state N09 is sending an ALERTING message. Ensure that the ringing tone can be heard in the early dialogue Ensure that in the active call state (N10) the transfer of tone or announcement on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 257 SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP 100 Trying CALL PROC 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL b) SDP pre-condition met INVITE SDP 100 Trying 183 Session Progress SDP PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP CALL PROC 180 Ringing ALERT PRACK 200 OK (PRACK) 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL SI_AU_08 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.5 ETSI EN 383 001 [49], clause 6.5 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: FAX G3 Test purpose: Ensure that call establishment and the mapping of the defined SDP parameters for T.38 between INVITE message and the SETUP message is performed correctly. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: SETUP = 3,1 kHz audio HLC = "Facsimile Group 2/3" SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line Based on T.38. b = line AS: 64 m = line: VA_Transport; T38 (table 4) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 258 Comments: SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP 100 Trying CALL PROC 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL b) SDP pre-condition met INVITE SDP 100 Trying 183 Session Progress SDP PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP CALL PROC 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL Table 4 Parameter transport protocol VA_Transport VA_Transport_1 udptl VA_Transport_2 tcptl SI_AU_09 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.5 ETSI EN 383 001 [49], clause 6.5 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: FAX G3-T.30 Test purpose: Ensure that call establishment and the mapping of the defined SDP parameters INVITE message and the SETUP message is performed correctly. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 259 Comments: SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP 100 Trying CALL PROC 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL b) SDP pre-condition met INVITE SDP 100 Trying 183 Session Progress SDP PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL SI_AU_10 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.3.3 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: Test purpose: Ensure that the call establishment and the call clearing procedure are performed correctly when the calling user clears after answering with a BYE message. The called user shall receive a DISCONNECT message indicating the Cause value # 16 "normal call clearing" with the progress indicator #8 or a Progress message with the progress indicator #8. ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 260 Comments: SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP 100 Trying CALL PROC 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL b) SDP pre-condition met INVITE SDP 100 Trying 183 Session Progress SDP PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL SI_AU_11 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.3.3 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: Test purpose: Ensure that the call clearing procedure is performed correctly when the called user clears after answering with a DISCONNECT message indicating the Cause value # 16 "normal call clearing". The calling user shall receive a BYE message. A reason header field with value 16 is sent in case of ETSI EN 383 001 [49] and ETSI TS 129 163 [i.20], optional in ITU-T Q.1912.5 [51]. ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 261 Comments: SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP 100 Trying 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL b) SDP pre-condition met INVITE SDP 183 Session Progress SDP PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERT PRACK 200 OK (PRACK) 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 262 Table 5 m= line B= line A= line BC parameter (see note 2) HLC parameter <media> <transport> <fmt-list> <modifier>:<bandwidth- value> (see note 3) rtpmap: <payload type> <encoding name>/ <clock rate> [/<encoding parameters>] Information Transport Capability User Information Layer 1 Protocol Indicator High Layer Characteristics Identification VA_01 audio RTP/AVP 0 N/A or up to 64 kbit/s N/A "3,1 kHz audio" "G.711 A-law " Note 2 VA_02 audio RTP/AVP Dynamic PT N/A or up to 64 kbit/s rtpmap:<dynamic-PT> PCMU/8000 "3,1 kHz audio" "G.711 A-law " Note 2 VA_03 audio audio RTP/AVP 8 N/A or up to 64 kbit/s N/A "3,1 kHz audio" "G.711 A-law " Note 2 VA_04 audio RTP/AVP Dynamic PT N/A or up to 64 kbit/s rtpmap:<dynamic-PT> PCMA/8000 "3,1 kHz audio" "G.711 A-law" Note 2 NOTE 1: In this table the codec G.711 is used only as an example. Other codec is possible. NOTE 2: HLC normally absent in this case. It is possible for HLC to be present with the value "Telephony", although clause 6.3.1 in Recommendation ITU-T Q.939 [i.18] indicates that this would normally be accompanied by a value of "Speech" for the Information Transfer Capability element. NOTE 3: <bandwidth value> for <modifier> of AS is evaluated to be B kbit/s. ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 263 Table 6: Values for test purposes SI_AU_04 and SI_AU_11 VARIABLE PT Encoding media type clock rate channels VA_01 0 PCMU A 8,000 1 VA_02 3 GSM A 8,000 1 VA_03 4 G723 A 8,000 1 VA_04 5 DVI4 A 8,000 1 VA_05 7 LPC A 8,000 1 VA_06 8 PCMA A 8,000 1 VA_07 9 G722 A 8,000 1 VA_08 12 QCELP A 8,000 1 VA_09 13 CN A 8,000 1 VA_10 18 G729 A 8,000 1 VA_11 Dyn G726-40 A 8,000 1 VA_12 Dyn G726-32 A 8,000 1 VA_13 Dyn G726-24 A 8,000 1 VA_14 Dyn G726-16 A 8,000 1 VA_15 Dyn G729D A 8,000 1 VA_16 Dyn G729E A 8,000 1 VA_17 Dyn GSM-EFR A 8,000 1 SI_AU_12 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23,], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3 ETSI EN 383 001 [49], clause 6.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: FAX - inband Test purpose: Ensure that call establishment and the mapping of the a = line: PCMA/8000; b=line - 64 kbit/s and m = RTP/AVP 8 for FAX - inband between INVITE message and the SETUP message is performed correctly. Ensure that in the active call state (N10) the data transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line: PCMA/8000 or PCMU/8000 (PIXIT) b = line: 64 kbit/s m = line: = RTP/AVP 8 or 0 (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 264 Comments: SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP 100 Trying 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL b) SDP pre-condition met INVITE SDP 100 Trying 183 Session Progress SDP PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERT PRACK 200 OK (PRACK) 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL SI_AU_13 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clauses 6.1.1, 6.1.3 ETSI EN 383 001 [49], clauses 6.1.1, 6.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: SIP Profile A or ITU-T Q.1912.5 [51] Profile B with PI or ETSI EN 383 001 [49] or ETSI TS 129 163 [i.20] Test purpose: Ensure that call establishment upon receipt of the first INVITE with sufficient digits, is performed correctly. During call establishment a Progress indicator information element shall be included in the SETUP message sent to the called user with progress description value #1 "call is not end-to-end ISDN" ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 265 Comments: SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP PI #1 100 Trying 180 Ringing ALERT 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL b) SDP pre-condition met INVITE SDP 100 Trying 183 Session Progress SDP PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP PI #1 180 Ringing ALERT PRACK 200 OK (PRACK) 200 OK INVITE CON ACK BYE DISC 200 OK BYE REL NOTE: The 183 Session Progress message with SDP answer should be sent only when the OBCI in the ALERTING is set to: inband info or appropriate pattern is now available. SI_AU_14 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clauses 6.1.1, 6.1.3 ETSI EN 383 001 [49], clauses 6.1.1, 6.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: Test purpose: During the session, the calling user decides to change the characteristics of the media session. This is accomplished by sending a re-INVITE containing a new media description. This re-INVITE references the existing dialog so that the IWU knows that it is to modify an existing session instead of establishing a new session. The IWU sends a 200 (OK) to accept the change. The requestor responds to the 200 (OK) with an ACK. In case when the parameter in the SDP rtpmap:<dynamic-PT> is used the codecs in table 6 applies. ISDN Parameter values: SETUP = 3,1 kHz audio; ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 266 SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CON ACK RE-INVITE 200 OK ACK Communication BYE DISC 200 OK BYE REL b) SDP pre-condition met INVITE 183 Session Progress PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERTING PRACK 200 OK (PRACK) 200 OK INVITE CON ACK Communication BYE DISC 200 OK BYE REL SI_AU_15 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.3.3 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ETSI TS 129 163 [i.20], clause 7.2.3.1 ETSI TS 183 028 [i.19] TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: Announcements controlled provided by the PSTN/ISDN Providing announcements to a user during the establishment of a communication session Test purpose: During the establishment of the communication the PSTN/ISDN provides an announcement e.g. "The communication is forwarded" or "The user is not reachable". Ensure that the transfer of tone or announcement on the media is performed correctly. The flow assume the use of the option-tag "100rel. ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 267 SI_AU_16 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.3.3 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ETSI TS 129 163 [i.20], clause 7.2.3.1 ETSI TS 183 028 [i.19] TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: Announcements controlled provided by the PSTN/ISDN Providing announcements to a user during the establishment of a communication session Test purpose: During the establishment of the communication the PSTN/ISDN provides an announcement e.g. "The communication is forwarded" or "The user is not reachable". Ensure that the transfer of tone or announcement on the media is performed correctly. The flow assumes the use of the P-Early media header. ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SI_AU_17 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 899-1 [23] NGN reference to: ETSI TS 129 163 [i.20], clause 7.2.3.1.3A.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: Basic_call; ETSI TS 129 163 [i.20] overlap receiving supported; In-Dialog Method Test purpose: Ensure that call establishment using overlap sending is performed correctly. Ensure that the SIP user receives an 180 Ringing message when the ISDN user answers with an ALERTING message. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC=speech, no HLC SIP Parameter values: Dial string parameters options=PIXIT TYPE_SDP= PIXIT; PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition Comments: INVITE SETUP SETUP ACK 183 Session progress INFO INFO 200 OK 183 Session progress Call proceeding 180 Ringing ALERTING 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 268 SI_AU_18 ISDN reference to: ETSI EN 300 403-1 [i.3] ETSI EN 300 899-1 [23] NGN reference to: ETSI TS 129 163 [i.20], clause 7.2.3.1.3A.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: Basic_call; ETSI TS 129 163 [i.20] overlap receiving supported; Multiple INVITE Method; one dialog used Test purpose: Ensure that call establishment using overlap sending is performed correctly. Ensure that the SIP user receives an 180 Ringing message when the ISDN user answers with an ALERTING message. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC=speech, no HLC SIP Parameter values: Dial string parameters options=PIXIT TYPE_SDP= PIXIT; PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition Comments: INVITE SETUP 484 SETUP ACK INVITE INFO 484 INVITE INFO 183 Session progress Call proceeding 180 Ringing ALERTING 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 269 SI_AU_19 ISDN reference to: ETSI EN 300 403-1 [i.3], ETSI EN 300 899-1 [23] NGN reference to: ETSI TS 129 163 [i.20], clause 7.2.3.1.3A.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: Basic_call; ETSI TS 129 163 [i.20] overlap receiving supported; Multiple INVITE Method; two dialogs used Test purpose: Ensure that call establishment using overlap sending is performed correctly. Ensure that the SIP user receives a 180 Ringing message when the ISDN user answers with an ALERTING message. The sending of the 183 Session Progress is optional. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC=speech, no HLC SIP Parameter values: Dial string parameters options=PIXIT TYPE_SDP= PIXIT; PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition Comments: INVITE csq 1 SETUP SETUP ACK INVITE csq2 INFO 484 csq 1 183 Session progress csq 2 Call proceeding 180 Ringing csq2 ALERTING 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.1.2 Codec negotiation
|
SI_XX_CN_01 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.3.3 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-SIP/Basic_call/Codec negotiation Selection criteria: Test purpose: During the session, the calling user decides to change the characteristics of the media session in the confirmed state. This is accomplished by sending a re-INVITE containing a new media description. This re-INVITE references the existing dialog so that the other party knows that it is to modify an existing session instead of establishing a new session. The other party sends a 200 (OK) to accept the change. The requestor responds to the 200 (OK) with an ACK. ISDN Parameter values: SETUP = 3,1 kHz audio SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 270 SI_XX_CN_02 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.3.3 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN /Basic_call/Codec negotiation Selection criteria: Test purpose: During the session, the calling user decides to change the characteristics of the media session. Ensure that the calling user can send UPDATE after completion of the initial INVITE transaction. The other party sends a 200 (OK) to accept the change. The requestor responds to the 200 (OK) with an ACK. ISDN Parameter values: SETUP = 3,1 kHz audio SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 271
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.1.3 Test purposes for SIP-ISDN, Basic call, DTMF
|
SI_XX_DT_01 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3 ETSI EN 383 001 [49], clause 6.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: DTMF inband Test purpose: Ensure that call establishment is performed correctly. Ensure that in the active call state (N10) the DTMF digits (events 0 through 15) can be transmitted inband to the called user in case when the SDP parameter in table 6a. ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN a) without SDP pre-condition INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CON ACK Communication BYE BYE 200 OK BYE 200 OK BYE b) SDP pre-condition met INVITE 183 Session Progress PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERTING 200 OK INVITE CONN ACK Communication BYE DISC 200 OK BYE REL Table 6a Values for test purposes SI_XX_DT_01 VARIABLE PT Encoding media type clock rate channels VA_01 0 PCMU A 8,000 1 VA_02 3 GSM A 8,000 1 VA_03 8 PCMA A 8,000 1 VA_04 dyn GSM-EFR A 8,000 1 ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 272 SI_XX_DT_02 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: Q.1912.5 [51], clause 6.1.3 ETSI EN 383 001 [49], clause 6.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/3,1 kHz audio Selection criteria: DTMF with IETF RFC 2833 [56] Test purpose: Ensure that call establishment is performed correctly. Ensure that in the active call state (N10) the DTMF Digits (events 0 through 15) can be transmitted as payload for DTMF Digits (IETF RFC 2833 [56]) to the called user in case when the SDP parameter in table 6 applies. ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CON ACK Communi cation BYE DISC 200 OK BYE REL b) SDP pre-condition met INVITE 183 Session Progress PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERTING PRACK 200 OK (PRACK) 200 OK INVITE CONN ACK Communi cation BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 273
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.1.4 Test purposes for SIP-ISDN, Basic call, UDI
|
SI_UD_01 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: Q.1912.5 [51], clause 6.1.3 ETSI EN 383 001 [49], clause 6.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/UDI Selection criteria: Test purpose: Ensure that call establishment and the mapping of the parameters is performed correctly. Ensure that in the active call state (N10) the data transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: SETUP = UDI; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line : rtpmap:<dynamic-PT> CLEARMODE/8000 b = line AS: 64 m = RTP/AVP Comments: SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CON ACK Communication BYE BYE 200 OK BYE 200 OK BYE b) SDP pre-condition met INVITE 183 Session Progress PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERTING PRACK 200 OK (PRACK) 200 OK INVITE CONN ACK Communication BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 274 SI_UD_03 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.3.3 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/UDI Selection criteria: Test purpose: Ensure that the call establishment and the call clearing procedure are performed correctly when the calling user clears after answering with a BYE message. The called user shall receive a DISCONNECT message indicating the Cause value # 16 "normal call clearing". Ensure that in the Call Delivered call state U4 the transfer of tone or announcement on the media channel is performed correctly. ISDN Parameter values: SETUP = UDI; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line : rtpmap:<dynamic-PT> CLEARMODE/8000 b = line AS: 64 m = RTP/AVP Comments: SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CON ACK RE-INVITE 200 OK ACK Communication BYE DISC 200 OK BYE REL b) SDP pre-condition met INVITE 183 Session Progress PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERTING 200 OK INVITE CONN ACK Communication BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 275 SI_UD_04 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.3.3 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSITS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/UDI Selection criteria: Test purpose: Ensure that the call clearing procedure is performed correctly when the called user clears after answering with a DISCONNECT message indicating the Cause value # 16 "normal call clearing". The calling user shall receive a BYE message. A reason header field with value 16 is sent in case of ETSI EN 383 001 [49] and ETSI TS 129 163 [i.20], optional in ITU-T Q.1912.5 [51]. ISDN Parameter values: SETUP = UDI; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line : rtpmap:<dynamic-PT> CLEARMODE/8000 b = line AS: 64 m = RTP/AVP Comments: SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CON ACK Communication BYE DISC 200 OK BYE REL b) SDP pre-condition met INVITE 183 Session Progress PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERTING PRACK 200 OK (PRACK) 200 OK INVITE CONN ACK Communication BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 276 SI_UD_05 ISDN reference to: ETSI EN 300 403-1 [i.3],clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clauses 6.1.1, 6.1.3 ETSI EN 383 001 [49], clause 6.11 TSS reference: SIP-ISDN/Basic_call/Successful/UDI Selection criteria: SIP Profile A or ITU-T Q.1912.5 [51] Profile B with PI or ETSI EN 383 001 [49] Test purpose: Ensure that call establishment upon receipt of the first INVITE with sufficient digits, is performed correctly. During call establishment a Progress indicator information element shall be included in the SETUP message sent to the called user with progress description value #1 "call is not end-to-end ISDN" ISDN Parameter values: SETUP = UDI SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line : rtpmap:<dynamic-PT> CLEARMODE/8000 b = line AS: 64 m = RTP/AVP Comments: SIP SUT ISDN INVITE SETUP PI #1 100 Trying CALL PROC 180 Ringing ALERT PRACK 200 OK (PRACK) 200 OK INVITE CON ACK Communication BYE DISC 200 OK BYE REL NOTE: ETSI EN 383 001 [49] is not conform to the ETSI ISDN basic standard regarding UDI (PI). SI_UD_06 ISDN reference to: ETSI EN 300 403-1 [i.3], clause 5.2.1 ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ETSI EN 383 001 [49], clause 6.1.1 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Successful/UDI Selection criteria: In case of UDI, the FCI is sent with "No interworking encountered" and "Originating access is ISDN" Test purpose: Ensure that call establishment upon receipt of the first INVITE with sufficient digits, is performed correctly. During call establishment a Progress indicator information element shall not be included in the SETUP message. ISDN Parameter values: SETUP = UDI SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line : rtpmap:<dynamic-PT> CLEARMODE/8000 b = line AS: 64 m = RTP/AVP ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 277 Comments: SIP SUT ISDN a) Without SDP pre-condition INVITE SETUP 100 Trying CALL PROC 180 Ringing ALERT 200 OK INVITE CON ACK Communication BYE DISC 200 OK BYE REL b) SDP pre-condition met INVITE 183 Session Progress PRACK 200 OK (PRACK) UPDATE 200 OK (UPDATE) SETUP 180 Ringing ALERTING PRACK 200 OK (PRACK) 200 OK INVITE CONN ACK Communication BYE DISC 200 OK BYE REL
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.1.5 Test purposes for SIP-ISDN, Basic call, Unsuccessful
|
Unsuccessful SI_XX_U01 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 5.1.4, G.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that, when calling to unallocated number, the network initiate call clearing to the calling user with a Not Found message. If the Reason Header field is implemented the cause value #1 "unassigned number" should be mapped to the Reason Header field. (According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response) ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE 100 Trying 404 Not Found ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 278 SI_XX_U02 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 5.1.4, G.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that the call will be released when there is no route to destination. The network initiates call clearing to the calling user with a 500 Server Internal Error. If the Reason Header field is implemented the cause value # 3 "no route to destination should be contained in the Reason Header field. (According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response) ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE 100 Trying 500 Server Internal Error ACK SI_XX_U03 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 5.2.5.1, G.1.7 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that, when the called user is user determined user busy the network initiate call clearing to the calling user with a 486 Busy Here message. If the Reason Header field is implemented the cause value # 17 should be contained in the Reason Header field. (According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response) ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. SIP SUT ISDN INVITE SETUP 100 Trying 486 Busy Here REL_COMP #17 ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 279 SI_XX_U04 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 5.2.5.4, G.1.9 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that when there is no answer from the called user ("no user responding"), the network initiate call clearing to the calling user with a 480 Temporarily unavailable message. If the Reason Header field is implemented the cause value # 18 should be contained in the Reason Header field. (According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response) ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. SIP SUT ISDN INVITE SETUP 100 Trying 480 Temporarily unavailable ACK SI_XX_U05 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 5.2.5.4, G.1.9 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that when there is no answer from the called user ("no answer from the user"), the ISDN network initiate call clearing to the calling user with a 480 Temporarily unavailable message. If the Reason Header field is implemented the cause value # 102 should be contained in the Reason Header field. (According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response) ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 280 Comments: SIP SUT ISDN INVITE SETUP 100 Trying 180 Ringing ALERTING ISUP T9 expired 480 Temporarily unavailable DISC #102 RELEASE ACK REL COMP SI_XX_U06 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 5.2.5.4, G.1.9 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful/ Selection criteria: Basic call; Reason Header field is supported Test purpose: Ensure that when there is no answer from the called user (but user alerted) and if the SIP network initiate call clearing before the SCN release the call, the SIP network shall send to the calling user a 480 Temporarily unavailable message and the SCN network initiate call clearing to the calling user with a DISCONNECT message indicating cause value # 20 Subscriber absent. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN SUT SIP SETUP INVITE CALL PROCEEDING . . . ALERTING 180 Ringing DISC#20 480 temp. Unavailable REL ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 281 SI_XX_U07 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 5.1.9, 5.3.2, G.1.10 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that when the called user rejects the call and responds with a RELEASE COMPLETE message indicating cause value # 21 "call rejected", the call will be released. The network initiates call clearing to the calling user with a 480 Temporarily unavailable message. If the Reason Header field is implemented the cause value # 21 should be contained in the Reason Header field. (According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response) ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 100 Trying 480 Temporarily unavailable REL COMP # 21 ACK SI_XX_U08 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 5.2.5.4, G.1.9 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSITS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that when the number is changed, the network initiate call clearing to the calling user with a 410 Gone message. If the Reason Header field is implemented the cause value # 22 ("number changed") should be contained in the Reason Header field. (According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response) ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE 100 Trying 410 Gone ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 282 SI_XX_U09 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 5.2.5.4, G.1.9 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSITS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that when the destination is out of order, the network initiate call clearing to the calling user with a 502 Bad Gateway message. If the Reason Header field is implemented the cause value Cause Value No. 27 ("destination out of order") should be contained in the Reason Header field. (According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response) ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. SIP SUT ISDN INVITE SETUP 100 Trying 502 Bad Gateway REL # 27 ACK RLC SI_XX_U10 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 5.1.9, 5.3.2, G.1.10 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that the call will be released when the called number is incomplete. The network initiates call clearing to the calling user according the CAUSE_VA interworking to SIP_MESSAGE_VA. If the Reason Header field is implemented the cause value should be contained in Reason Header field. (According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response) ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 100 Trying SIP_MESSAGE_VA ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 283 SI_XX_U10 SIP_MESSAGE_VA CAUSE_VA PSTN cause (Destination number PIXIT) VA_1 404 Not Found value # 1 "Unassigned (unallocated) number" VA_2 500 server internal error value # 3 "No route to destination" VA_3 410 Gone value # 22 "Number changed" VA_4 484 Address Incomplete value# 28 "Invalid number format (incomplete number") SI_XX_U11 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 5.2.5.4, G.1.9 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that when the call is released with Cause Value No. 31 ("normal unspecified"), the network initiate call clearing to the calling user with a 480 Temporarily unavailable message. If the Reason Header field is implemented the cause value # 31 should be contained in the Reason Header field. (According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response) ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 100 Trying 480 Temporarily unavailable RELEASE #31 ACK REL_COMP SI_XX_U12 ISDN reference to: ETSI EN 300 403-1 [i.3], clause G.1.6 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Multipoint Configuration: for the called side Test purpose: Ensure that when the calling user clears the call with a SIP_MESSAGE_VA before answer from called user. ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 284 Comments: SIP SUT ISDN INVITE SETUP 100 Trying CALL PROC 180 Ringing ALERT SIP_MESSAGE_VA DISC 200 OK REL 487 Request terminated ACK SIP_MESSAGE_VA: SI_XX_U12 VA_1 CANCEL VA_2 BYE SI_XX_U13 ISDN reference to: ETSI EN 300 403-1 [i.3], clause G.1.6 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Point-to-point Configuration: for the called side Test purpose: Ensure that the SUT in the Idle state on receipt of a INVITE message, sending out a SETUP message, having received a CALL PROCEEDING, on receipt of an RELEASE, where the cause value defined as CV_ISDN, the SUT immediately requests the disconnection of the internal bearer path. the SUT shall send the appropriate SIP status defined as SIP_FAILURE_VA The ISDN Cause Value field in the ISDN RELEASE message is mapped to the Reason header field if implemented According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response. ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP CALL PROC SIP_MESSAGE_VA RELEASE ACK REL COMP ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 285 Values for test purposes SI_XX_U13 ←SIP Message SIP_FAILURE_VA CV_SIP ←DISC Cause Indicators parameter CV_ISDN VA_1 486 Busy Here Cause Value No. 17 Cause Value No. 17 ("user busy") VA_2 480 Temporarily unavailable Cause Value No. 18 Cause Value No. 18 ("No user responding") VA_3 480 Temporarily unavailable Cause Value No. 21 Cause Value No. 21 ("all rejected") VA_4 410 Gone Cause Value No. 23 Cause Value No. 22 ("number changed") VA_5 502 Bad Gateway Cause Value No. 27 Cause Value No. 27 ("destination out of order") VA_6 484 Address Incomplete Cause Value No. 28 Cause Value No. 28 ("invalid number format (address incomplete") VA_7 480 Temporarily unavailable Cause Value No. 31 Cause Value No. 31 ("normal unspecified") (Class default) VA_8 500 Server Internal Error Cause Value No. 47 Cause Value in the Class 010 (resource unavailable, Cause Value No. 38-47) (47 is class default) VA_9 500 Server Internal Error Cause Value No. 63 Cause Value No. 63 ("service option not available, unspecified") (Class default) VA_10 500 Server Internal Error Cause Value No. 88 Cause Value No. 88 ("incompatible destination") VA_11 500 Server Internal Error Cause Value No. 111 Cause Value No. 111 ("protocol error, unspecified") (Class default) SI_XX_U14 ISDN reference to: ETSI EN 300 403-1 [i.3], clause G.1.6 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Point-to-point Configuration: for the called side Test purpose: Ensure that the SUT in the Idle state on receipt of a INVITE message, sending out a SETUP message, having received a ALERTING message, on receipt of an DISCONNECT where the cause value defined as CV_ISDN, the SUT immediately requests the disconnection of the internal bearer path. the SUT shall send SIP_FAILURE_VA message The Cause Value field in the DISCONNECT message is mapped to the Reason header field if implemented (According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response) ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERTING SIP_MESSAGE_VA DISC ACK REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 286 Values for test purposes SI_XX_U14 ←SIP Message SIP_FAILURE_VA CV_SIP ←DISC Cause Indicators parameter CV_ISDN VA_1 480 Temporarily unavailable Cause Value No. 21 Cause Value No. 21 ("all rejected") VA_2 502 Bad Gateway Cause Value No. 27 Cause Value No. 27 ("destination out of order") VA_3 480 Temporarily unavailable Cause Value No. 31 Cause Value No. 31 ("normal unspecified") (Class default) VA_4 500 Server Internal Error Cause Value No. 38 Cause Value No. 38 ("Network out of order") VA_5 500 Server Internal Error Cause Value No. 41 Cause Value No. 41 ("Temporary failure ") VA_6 500 Server Internal Error Cause Value No. 111 Cause Value No. 111 ("protocol error, unspecified") (Class default) SI_XX_U15 ISDN reference to: ETSI EN 300 403-1 [i.3], clause G.1.6 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Point-to-point Configuration: for the called side Cause Value is mapped to the Reason header field Test purpose: Ensure that the SUT in the Idle state on receipt of a INVITE message, sending out a SETUP message, having received a ALERTING message, having received a CONNECT", a 200 OK message is sent, on receipt of an DISCONNECT where the cause value defined as CV_ISDN, the SUT immediately requests the disconnection of the internal bearer path. the SUT shall send BYE message The Cause Value field in the DISCONNECT message is mapped to the Reason header field if implemented (According to ETSI TS 129 163 [i.20] and ETSI EN 383 001 [49] the Reason Header field shall be added to the SIP final response) ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONNECT BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 287 Values for test purposes SI_XX_U15 ←SIP Message SIP_FAILURE_VA CV_SIP ←DISC Cause Indicators parameter CV_ISDN VA_1 BYE Cause Value No. 16 Cause Value No. 16 VA_2 BYE Cause Value No. 27 Cause Value No. 27 ("destination out of order") VA_3 BYE Cause Value No. 31 Cause Value No. 31 ("normal unspecified") (Class default) VA_4 BYE Cause Value No. 38 Cause Value No. 38 ("Network out of order") VA_5 BYE Cause Value No. 41 Cause Value No. 41 ("Temporary failure ") SI_XX_U16 ISDN reference to: ETSI EN 300 403-1 [i.3], clause G.1.6 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: ISDN = point to point Configuration: with DDI Test purpose: Ensure that the call will be released with cause 102 (Recovery on timer expiry) 484 Address Incomplete on the SIP side after the expire of timer T 304 when called user is in call state U02 when the called number is incomplete. ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. SIP SUT ISDN INVITE 100 Trying SETUP SETUP ACK INFO SC (optional) RELEASE # 102 484 Address Incomplete REL_COMP ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 288 SI_XX_U17 ISDN reference to: ETSI EN 300 403-1 [i.3], clause G.1.6 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 ETSI EN 383 001 [49], clause 6.11 ETSI TS 129 163 [i.20], clause 7.2.3.1 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: During the session, the calling user decides to change the characteristics of the media session. This is accomplished by sending a re-INVITE containing a new media description. This re-INVITE references the existing dialog so that the other party knows that it is to modify an existing session instead of establishing a new session. Ensure that if the other party (the GW) does not accept the change, he sends an error response such as 488 (Not Acceptable Here), which also receives an ACK. The session remains in the active state. ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONN ACK Communication RE-INVITE 484 Not Acceptable Here ACK Communication BYE Disconnect 200 OK BYE Release SI_XX_U18 ISDN reference to: ETSI EN 300 403-1 [i.3], clause G.1.6 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 IETF RFC 3261 [28], clause 4 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that upon receiving a 421 (Extension Required) response to an initial INVITE request in which the precondition mechanism was not used, including the "precondition" option tag in the Require header, the originating UE shall send a new INVITE request using the precondition mechanism, if the originating UE supports the precondition mechanism. ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 289 SI_XX_U19 ISDN reference to: ETSI EN 300 403-1 [i.3], clause G.1.6 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 IETF RFC 3261 [28], clause 4 TSS reference: SIP-ISDN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that if a codec is required and the MGCF does not find an available matching codec at the MGW for the received initial INVITE request, the MGCF shall: send 503 (Service Unavailable) response if the type of codec was acceptable but none were available; or send 488 (Not Acceptable Here) response if the type of codec was not supported, and may include SDP in the message body to indicate the codecs supported by the MGCF/MGW. ISDN Parameter values: SETUP = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments:
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2 Test purposes for SIP - ISDN Supplementary services
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.1 OIP/CLIP
|
SI_XXSSOIP01 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a URI with an identity in the format of a tel URI has not been received and • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 290 Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL SI_XXSSOIP02 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No priv value is sent Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • No priv value is received • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 291 SI_XXSSOIP03 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No priv value is sent No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • No priv value is received • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 292 SI_XXSSOIP04 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: SIP URI or SIPS URI are used in the P-Preferred-Identity The user subscribes OIR "temporary mode" default "not restricted" No priv value is sent Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • no priv value is received • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 293 SI_XXSSOIP05 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the priv-value component is set to "none" • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 294 SI_XXSSOIP06 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the priv-value component is set to "none" • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 295 SI_XXSSOIP07 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • No priv value is received • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 296 SI_XXSSOIP08 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3; ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • no priv value is received • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 297 SI_XXSSOIP09 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 298 SI_XXSSOIP10 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 299 SI_XXSSOIP11 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • no priv value is received • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 300 SI_XXSSOIP12 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • no priv value is received • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 301 SI_XXSSOIP13 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 302 SI_XXSSOIP14 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • no priv value is received • the SIP From header field containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 303 SI_XXSSOIP15 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 304 SI_XXSSOIP16 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a URI (PIXIT) in the format of a tel URI has been received • no priv value is received • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 305 SI_XXSSOIP17 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3; ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the priv-value component is set to "none" • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 306 SI_XXSSOIP18 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • no priv value is received • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 307 SI_XXSSOIP19 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header is set to anonymous • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 308 SI_XXSSOIP20 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • no priv value is received • the SIP From header is set to anonymous • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 309 SI_XXSSOIP21 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 310 SI_XXSSOIP22 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 311 SI_XXSSOIP23 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the priv-value component is set to "none" • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 312 SI_XXSSOIP24 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 313 SI_XXSSOIP25 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received: • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) not in the format of a tel URI has not been received • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 314 SI_XXSSOIP26 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number is correctly delivered to the called (served) user with the 1stCalling party information element coded: - Address signals = default number derived from the From header - Screening indicator = user provided not verified - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed 2ndCalling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 315 SI_XXSSOIP27 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header is set to anonymous • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 316 SI_XXSSOIP28 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header is set to anonymous • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 317 SI_XXSSOIP29 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received: • no priv value is received • the SIP From header is set to anonymous • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 318 SI_XXSSOIP30 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header is set to anonymous • the Calling Party Number is correctly delivered to the called (served) user with the Calling party information element coded: - Address signals = default number derived from the P-Asserted-Identity - Screening indicator = network provided - Numbering plan indicator = ISDN numbering plan - Address Presentation Restricted Indicator = Presentation allowed SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 319
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.2 OIR/CLIR
|
SI_XXSSOIR01 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • the priv-value component is set to "id" • the SIP From header field containing a SIP URI (PIXIT) has been received • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 320 SI_XXSSOIR02 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • the priv-value not present • the SIP From header field containing a SIP URI (PIXIT) has been received • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 321 SI_XXSSOIR03 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • priv-value component is set to "id" • the SIP From header is set to anonymous • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 322 SI_XXSSOIR04 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • priv-value component is not present • the SIP From header is set to anonymous • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL SI_XXSSOIR05 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR temporary mode" default "not restricted Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • the priv-value component is set to "id" • the SIP From header field containing a SIP URI (PIXIT) has been received • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 323 SI_XXSSOIR06 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR temporary mode" default "not restricted Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • priv-value component is set to "id" • the SIP From header is set to anonymous • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL SI_XXSSOIR07 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR permanent mode Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • the priv-value component is set to "id" • the SIP From header field containing a SIP URI (PIXIT) has been received • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 324 SI_XXSSOIR08 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR permanent mode Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • the priv-value component is not present • the SIP From header field containing a SIP URI (PIXIT) has been received • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL SI_XXSSOIR09 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR permanent mode Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • priv-value component is set to "id" • the SIP From header is set to anonymous • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 325 SI_XXSSOIR10 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR permanent mode Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • priv-value component is not present • the SIP From header is set to anonymous • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 326 SI_XXSSOIR11 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "permanent mode" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) not in the format of a tel URI has been received • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 327 SI_XXSSOIR12 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: SIP URI or SIPS URI is used in the P-Preferred-Identity The user subscribes OIR "permanent mode" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • SIP URI or SIPS URI are used in the in the P-Preferred -Identity • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) not in the format of a tel URI has not been received • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 328 SI_XXSSOIR13 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "permanent mode" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the priv-value component is set to "none" • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 329 SI_XXSSOIR14 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "permanent mode" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 330 SI_XXSSOIR15 ISDN reference to: ETSI EN 300 092-1 [i.14], clause 9.3 ETSI EN 300 403-1 [i.3], clauses 4.5.10, 4.5.11 NGN reference to: Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 ETSI TS 124 607 [43] TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "permanent mode" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header is set to anonymous • the Calling party number information element is delivered to the called user without any digit information SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 331
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.3 TIP/COLP
|
SI_XXSSCOLP01 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI TS 124 608 [44] TSS reference: SIP-ISDN/SS/COLP SIP selection criteria: ISDN Parameter criteria: Temporary presentation allowed Test purpose: Ensure that the SUT on receipt of an CONNECT message with a Connected Party Number information element coded Address presentation restricted parameter = presentation allowed nature of address indicator = ISDN_NAI Numbering plan indicator = ISDN/Telephony numbering plan Screening indicator = ISDN_SI Address signals included sends a 200 OK INVITE to the UAC with a P-Asserted-Identity header field containing a URI with an identity in the format of a tel URI has been received. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL Values for test purposes SI_XXSSCOLP01 VA_01 ISDN_NAI = national number, '010'B ISDN_SI = user provided verified and passed, '01'B VA_02 ISDN_NAI = national number, '010'B B ISDN_SI = user provided, not screened, '00'B VA_03 ISDN_NAI = international number, '001'B ISDN_SI = user provided, not screened '00'B VA_04 ISDN_NAI = international number, '001'B ISDN_SI = user provided, verified and passed '01'B ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 332 SI_XXSSCOLP02 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI TS 124 608 [44] TSS reference: SIP-ISDN/SS/COLP SIP selection criteria: ISDN Parameter criteria: Temporary presentation allowed Test purpose: Ensure that the SUT on receipt of an CONNECT message without a Connected Party Number information element sends a 200 OK INVITE to the UAC with a P-Asserted-Identity header field containing a URI with an identity in the format of a tel URI has been received. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL SI_XXSSCOLP03 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI TS 124 608 [44] TSS reference: SIP-ISDN/SS/COLP SIP selection criteria: ISDN Parameter criteria: Temporary presentation allowed Test purpose: Ensure that the SUT on receipt of an CONNECT message with a Unscreened Connected Party Number information element sends a 200 OK INVITE to the UAC with a P-Asserted-Identity header field containing a URI with an identity in the format of a tel URI has been received. The unscreened number is delivered in a From Header of the UPDATE request send after the 200 OK INVITE. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number , screening indicator user provided not verified Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 333 SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK UPDATE 200 OK UPDATE BYE DISC 200 OK BYE REL
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.4 TIR/COLR
|
SI_XXSSCOLR01 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI TS 124 608 [44] TSS reference: SIP-ISDN/SS/COLP SIP selection criteria: ISDN Parameter criteria: Temporary presentation allowed Test purpose: Ensure that the SUT on receipt of an ANM message with a Connected Party Number information element coded: • Address presentation restricted parameter = presentation restricted, • Nature of address indicator = ISDN_NAI • Numbering plan indicator = ISDN/Telephony numbering plan • Screening indicator = ISDN_SI • Address signal included • sends a 200 OK INVITE to the UAC with • A P-Asserted-Identity header field containing a URI has not been received • A Privacy header field was received and the priv-value component is set to "id". SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL Values for test purposes SI_XXSSCOLR01 VA_01 ISDN_NAI = national number, '010'B ISDN_SI = user provided verified and passed, '01'B VA_02 ISDN_NAI = national number, '010'B B ISDN_SI = user provided, not screened, '00'B VA_03 ISDN_NAI = international number, '001'B ISDN_SI = user provided, not screened '00'B VA_04 ISDN_NAI = international number, '001'B ISDN_SI = user provided, verified and passed '01'B ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 334 SI_XXSSCOLR02 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI TS 124 608 [44] TSS reference: SIP-ISDN/SS/COLP SIP selection criteria: ISDN Parameter criteria: Permanent presentation restricted Test purpose: Ensure that the SUT on receipt of an CONNECT message with a Connected Party Number information element coded: • Address presentation restricted parameter = presentation allowed • Nature of address indicator = ISDN_NAI • Numbering plan indicator = ISDN/Telephony numbering plan • Screening indicator = ISDN_SI • Address signals included • Sends a 200 OK INVITE to the UAC with • A P-Asserted-Identity header field has not been received • A Privacy header field was received and the priv-value component is set to "id". SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL Values for test purposes SI_XXSSCOLR02 VA_01 ISDN_NAI = national number, '010'B ISDN_SI = user provided verified and passed, '01'B VA_02 ISDN_NAI = national number, '010'B B ISDN_SI = user provided, not screened, '00'B VA_03 ISDN_NAI = international number, '001'B ISDN_SI = user provided, not screened '00'B VA_04 ISDN_NAI = international number, '001'B ISDN_SI = user provided, verified and passed '01'B ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 335 SI_XXSSCOLR03 ISDN reference to: ETSI EN 300 092-1 [i.14] ETSI EN 300 403-1 [i.3] NGN reference to: ETSI TS 124 608 [44] TSS reference: SIP-ISDN/SS/COLP SIP selection criteria: ISDN Parameter criteria: Temporary presentation restricted Test purpose: Ensure that the SUT receiving a CONNECT message without a Connected number: • Sends a 200 OK INVITE to the UAC with • A P-Asserted-Identity header field containing a URI with an identity in the format of a tel URI has not been received • A Privacy header field was received and the priv-value component is set to "id". SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: CONNECT; Connected number Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 336
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.5 CFU
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.5.1 CFU - SIS
|
SIS_XXSSCFU 01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 337 SIS_XXSSCFU 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B in network N2 is provided with CFU "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 338 SIS_XXSSCFU 03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B in network N2 is provided with CFU "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 339 SIS_XXSSCFU 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User B has a point- to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 340 SIS_XXSSCFU 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFU. The user A and the user C are in network N1. The user B is provided with CFU "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 341 SIS_XXSSCFU 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting. User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding unconditional supported performed by the UE Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE INVITE RLC 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 342 SIS_XXSSCFU 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes. User B has a point-to- point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding unconditional supported performed by the UE Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE INVITE RLC 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 343 SIS_XXSSCFU 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No. User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding unconditional supported performed by the UE Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE INVITE RLC 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE SIS_XXSSCFU 09 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with Partial Rerouting User C is provided with TIR. The user B is provided with Partial Rerouting "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No. User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding unconditional supported performed by the UE CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 344 SIS_XXSSCFU 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported user C is user determined user busy Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 INVITE INVITE INVITE INVITE 486 486 486 486 ACK ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC REL INVITE INVITE INVITE INVITE RLC 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 345 SIS_XXSSCFU 11 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported user C is network determined user busy Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 INVITE INVITE INVITE 486 486 486 ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK SIS_XXSSCFU 12 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU. User B has a point-to-point Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported performed by the UE user C is network determined user busy User B has activated the Partial Rerouting service Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE INVITE RLC 486 486 486 486 ACK ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 346 SIS_XXSSCFU 13 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU. User B has a point-to-point Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported performed by the UE user C is network determined user busy User B has activated the Partial Rerouting service Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE RLC 486 486 486 ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK SISI_XXSSCFU 14 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU. User D forwards the call to back to user B. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 347
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.5.2 CFU - SII
|
SII_XXSSCFU 01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE B UE C MGCF I-CSCF S-CSCF P-CSCF UE-A INVITE INVITE INVITE INVITE 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 348 SII_XXSSCFU 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE B UE C MGCF I-CSCF S-CSCF P-CSCF UE-A INVITE INVITE INVITE INVITE 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 349 SII_XXSSCFU 03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE B UE C MGCF I-CSCF S-CSCF P-CSCF UE-A INVITE INVITE INVITE INVITE 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 350 SII_XXSSCFU 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE B UE C MGCF I-CSCF S-CSCF P-CSCF UE-A INVITE INVITE INVITE INVITE 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 351 SII_XXSSCFU 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE B UE C MGCF I-CSCF S-CSCF P-CSCF UE-A INVITE INVITE INVITE INVITE SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 352 SII_XXSSCFU 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting service. User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding unconditional supported performed by the UE Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE C UE B MGCF I-CSCF S-CSCF P-CSCF UE-A INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 SETUP REL ALERTING RLC 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 353 SII_XXSSCFU 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting service "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes). User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE C UE B MGCF I-CSCF S-CSCF P-CSCF UE-A INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 SETUP REL ALERTING RLC 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 354 SII_XXSSCFU 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting service "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No). User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding unconditional supported performed by the UE Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE C UE B MGCF I-CSCF S-CSCF P-CSCF UE-A INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 SETUP REL ALERTING RLC 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 355 SII_XXSSCFU 09 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting service "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No). User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE B UE B MGCF I-CSCF S-CSCF P-CSCF UE-A INVITE INVITE INVITE SETUP INVITE FAC SETUP REL ALERTING RLC 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC SII_XXSSCFU 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE B UE C MGCF I-CSCF S-CSCF P-CSCF UE-A INVITE INVITE INVITE INVITE 181 181 181 181 SETUP RLC#17 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 356 SII_XXSSCFU 11 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and in network N2 and is provided with CFU. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE C UE B MGCF I-CSCF S-CSCF P-CSCF UE-A INVITE INVITE INVITE INVITE 181 181 181 181 486 486 486 486 ACK ACK ACK ACK SII_XXSSCFU 13 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting service. User B has a point-to-point Configuration. Selection criteria: Call forwarding unconditional supported User B has activated the Partial Rerouting service Test purpose: To verify that a call is released correctly if CFU performed by the UE was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE B UE C MGCF I-CSCF S-CSCF P-CSCF UE-A INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 SETUP REL RLC#17 RLC 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 357 SII_XXSSCFU 14 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting service. User B has a point-to-point Configuration. Selection criteria: Call forwarding unconditional supported User B has activated the Partial Rerouting service Test purpose: To verify that a call is released correctly if CFU performed by the UE was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: UE B UE C MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL RLC 486 486 486 486 ACK ACK ACK ACK SIIS_XXSSCFU 15 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP-ISDN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU. User D in network N2 forwards the call to back to user B. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: BC = PIXIT Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 358 SIIS_XXSSCFU 16 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 TSS reference: SIP-ISDN-ISDN-SIP/Supplementary_services/CFU Selection criteria: The user is A in network N1. The user B and the user C are in network N2. User B is provided with CFU. User D in network N1 forwards the call to back to user B. Network option: hop counter supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, C to D. User D forwards the call to back to user B. User D forwards the call to back to user B. Ensure that the call is released. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: BC = PIXIT Comments:
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.6 CFB
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.6.1 CFB - SIS
|
SIS_XXSSCFB01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB- (network determined). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network CFB- (network determined) Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 359 SIS_XXSSCFB02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB-(network determined). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy (user determined) Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE RLC # 17 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 360 SIS_XXSSCFB03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is provided with CFU "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy (user determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE RLC #17 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 361 SIS_XXSSCFB04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is provided with CFU "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy (user determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE RLC #17 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 362 SIS_XXSSCFB05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No, served user receives notification that the call has been forwarded" = No.) User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy (user determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE RLC #17 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 363 SIS_XXSSCFB06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFB The user B is provided with CFB "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No, served user receives notification that the call has been forwarded" = No). User B has a point- to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy (user determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE RLC #17 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 364 SIS_XXSSCFB07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is provided with CFU "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy (network determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 365 SIS_XXSSCFB08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is provided with CFU "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy (network determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is informed of the forwarding number (user B has presentation allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 366 SIS_XXSSCFB09 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No). User B has a point-to- multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy (network determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 367 SIS_XXSSCFB 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFB The user B is provided with CFB "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = No). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy (network determined) CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B- channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 368 SIS_XXSSCFB 11 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting service. User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding busy performed by the UE Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE INVITE RLC 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 369 SIS_XXSSCFB 12 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting service "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes. User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding busy Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is informed of the forwarding number (user B has presentation allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE INVITE RLC 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE SIS_XXSSCFB 13 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting service "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No. User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding busy performed by the UE Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 370 SIS_XXSSCFB 14 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting service The user B is provided with Partial Rerouting service "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No). User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding busy performed by the UE CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC REL INVITE INVITE INVITE INVITE RLC 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE INVITE RLC 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 371 SIS_XXSSCFB 15 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with CFB. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network CFB supported user C is user determined user busy Test purpose: To verify that a call is released correctly if CFB was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE RLC#17 181 181 181 181 INVITE INVITE INVITE INVITE 486 486 486 486 ACK ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK SIS_XXSSCFB 16 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with CFB. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network CFB supported user C is network determined user busy Test purpose: To verify that a call is released correctly if CFB was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 INVITE INVITE INVITE 486 486 486 ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 372 SIS_XXSSCFB 17 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with Partial Rerouting service. User B has activated the Partial Rerouting service. User B has a point-to-point Configuration. Selection criteria: CFB supported performed by the UE user C is network determined user busy User B has activated the Partial Rerouting service Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETU P INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE INVITE RLC 486 486 486 486 ACK ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK SIS_XXSSCFB 18 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with Partial Rerouting service. User B has activated the Partial Rerouting service. User B has a point-to-point Configuration. Selection criteria: CFB supported performed by the UE User C is network determined user busy User B has activated the Partial Rerouting service Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETU P INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE RLC 486 486 486 ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 373 SISI_XXSSCFB 19 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB. User D forwards the call to back to user B. Selection criteria: Call forwarding by the network Call forwarding busy Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) ISDN Parameter values: BC = PIXIT Comments:
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.6.2 CFB - SII
|
SII_XXSSCFB 01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B in network N2 is provided with CFB. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy - NDUB Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 374 SII_XXSSCFB 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B in network N2 is provided with CFB. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy - UDUB Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE RLC#17 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 375 SII_XXSSCFB 03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 provided with CFB "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy - NDUB CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 376 SII_XXSSCFB 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 provided with CFB "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy - NDUB CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 377 SII_XXSSCFB 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. User B in network N2 is provided with CFU "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy - NDUB CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 378 SII_XXSSCFB 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. User B in network N2 is provided with CFU "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy - NDUB CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 379 SII_XXSSCFB 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B in network N2 is provided with CFB "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy - UDUB CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE RLC # 17 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 380 SII_XXSSCFB 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B in network N2 is provided with CFB "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy - UDUB CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE RLC # 17 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 381 SII_XXSSCFB 09 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. User B in network is provided with CFB "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy - UDUB CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE RLC # 17 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 382 SII_XXSSCFB 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. User B in network N2 is provided with CFB "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy - NDUB CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE INVITE 181 181 181 181 SETUP ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 383 SII_XXSSCFB 11 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B in network N2 is provided with CFB. User B has activated the Partial Rerouting service. User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding busy performed by the UE Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 SETUP REL ALERTING RLC 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 384 SII_XXSSCFB 12 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B in network N2 is provided with CFB Partial Rerouting service "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes). User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding busy performed by the UE Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 SETUP REL ALERTING RLC 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 385 SII_XXSSCFB 13 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B in network N2 is provided with CFB Partial Rerouting service "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No). User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding busy Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 SETUP REL ALERTING RLC 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 386 SII_XXSSCFB 14 ISDN reference to: ETSI EN 300 207-1 [i.5] clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B in network N2 is provided with CFB - Partial Rerouting service "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No). User B has a point-to-point Configuration. Selection criteria: User B has activated the Partial Rerouting service Call forwarding busy performed by the UE Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed no - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC SETUP REL ALERTING RLC 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC SII_XXSSCFB 15 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy supported Test purpose: To verify that a call is released correctly if CFB was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE RLC # 17 SETUP 181 181 181 181 RLC #17 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 387 SII_XXSSCFB 16 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy supported Test purpose: To verify that a call is released correctly if CFB was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE RLC # 17 181 181 181 181 486 486 486 486 ACK ACK ACK ACK SII_XXSSCFB 17 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB. User B has a point-to-point Configuration. Selection criteria: Call forwarding busy supported User B has activated the Partial Rerouting service Test purpose: To verify that a call is released correctly if Partial Rerouting was not successfully. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP INVITE 100 Trying FAC 181 REL 181 RLC 181 181 SETUP RLC #17 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 388 SII_XXSSCFB 18 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB- Partial Rerouting. User B has a point-to-point Configuration. Selection criteria: Call forwarding busy supported User B has activated the Partial Rerouting service Test purpose: To verify that a call is released correctly if Partial Rerouting - CFB performed by the UE was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP INVITE 100 Trying FAC 181 REL 181 RLC 181 181 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 389 SII_XXSSCFB 19 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial Rerouting - CFB. User B has a point-to-point Configuration. Selection criteria: Call forwarding busy supported User B has activated the Partial Rerouting service Test purpose: To verify that a call is released correctly if Partial Rerouting - CFB performed by the UE was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE 100 Trying INVITE 100 Trying INVITE 100 Trying SETUP INVITE 100 Trying FAC 181 REL 181 RLC 181 181 SETUP RLC #17 486 486 486 486 ACK ACK ACK ACK SIIS_XXSSCFB 20 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP-ISDN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU. User D forwards the call to back to user B. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network Call forwarding busy Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 390 SIIS_XXSSCFB 21 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: SIP-ISDN-ISDN-SIP/Supplementary_services/CFB Selection criteria: The user is A in network N1. The user B and the user C are in network N2. User B is provided with CFB. User E forwards the call to back to user B. Network option: hop counter supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, C to D. User D forwards the call to back to user B. User D forwards the call to back to user B. Ensure that the call is released. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments:
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.7 CFNR
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.7.1 CFNR - SIS
|
SIS_XXSSCFNR 01 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR/ Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR , option B, immediate release, and no notification. User B has a point-to- multipoint Configuration. Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 REL RLC 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 391 SIS_XXSSCFNR02 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR/ Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR , option A, late release, no notification. User B has a point-to-multipoint Configuration. Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 REL 180 180 180 180 RLC 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 392 SIS_XXSSCFNR03 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR/ Configuration: The user A and the user C are in network N1. The user B is provided with CFNR "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes ". User B has a point-to-multipoint Configuration. Selection criteria: CFNR supported, option B, immediate release CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. User A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). ISDN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 REL RLC 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 393 SIS_XXSSCFNR 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No). User B has a point-to-multipoint Configuration. Selection criteria: CFNR supported, option B, immediate release CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 REL RLC 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 394 SIS_XXSSCFNR 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No). User B has a point-to- multipoint Configuration. Selection criteria: CFNR supported, option B, immediate release CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 REL RLC INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 395 SIS_XXSSCFNR 06 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR/ Configuration: The user A and the user C are in network N1. The user B is provided with CFNR "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes). User B has a point-to-multipoint Configuration. Selection criteria: CFNR supported, option A, late release CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. User A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). ISDN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying REL 180 180 180 180 RLC 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 396 SIS_XXSSCFNR 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No). User B has a point-to- multipoint Configuration. Selection criteria: CFNR supported, option A, late release CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying REL 180 180 180 180 RLC 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 397 SIS_XXSSCFNR 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No, "). User B has a point-to-multipoint Configuration. Selection criteria: CFNR supported, option A, late release CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 INVITE INVITE INVITE INVITE 100 Trying REL 180 180 180 180 RLC 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 398 SIS_XXSSCFNR 09 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial rerouting during alerting. User B has a point-to-point Configuration. Selection criteria: Partial rerouting during alerting - no notification Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERT 180 180 180 180 FAC REL RLC SETUP INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 399 SIS_XXSSCFNR 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial rerouting during alerting "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes). User B has a point-to-point Configuration. Selection criteria: Partial rerouting during alerting - full notification Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. User A is notified of call diversion and informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is informed of the forwarding number (user B has presentation allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERT 180 180 180 180 FAC REL RLC 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 400 SIS_XXSSCFNR 11 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial rerouting during alerting "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No). User B has a point-to-point Configuration. Selection criteria: Partial rerouting during alerting Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERT 180 180 180 180 FAC REL 181 181 181 181 INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 401 SIS_XXSSCFNR 12 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Partial rerouting during alerting "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No). User B has a point-to-point Configuration. Selection criteria: Partial rerouting during alerting - no notification Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERT FAC REL RLC INVITE INVITE INVITE INVITE 100 Trying 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 402 SIS_XXSSCFNR 13 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network CFNR option B, immediate release, no notification user C is user determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERT DISC REL INVITE INVITE INVITE INVITE 100 Trying 486 486 486 486 ACK ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 403 SIS_XXSSCFNR 14 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network CFNR supported option B, immediate release, no notification user C is network determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERT DISC REL INVITE INVITE INVITE 486 486 486 ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 404 SIS_XXSSCFNR 15 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR . User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network CFNR option A, late release, no notification user C is user determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. User B continues to alert to the forwarding user. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERT INVITE INVITE INVITE INVITE 486 486 486 486 ACK ACK ACK ACK CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 405 SIS_XXSSCFNR 16 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network CFNR supported option A, late release, no notification user C is network determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. User B continues to alert to the forwarding user. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERT FAC INVITE INVITE INVITE INVITE 486 486 486 486 ACK ACK ACK ACK CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 406 SIS_XXSSCFNR 17 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR. User B has a point-to-point Configuration. Selection criteria: Call forwarding by the network CFNR supported, partial rerouting (option B, immediate release) user C is network determined network busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERT FAC REL RLC INVITE INVITE INVITE 486 486 486 ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 407 SIS_XXSSCFNR 18 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR. User B has a point-to-point Configuration. Selection criteria: Call forwarding by the network CFNR, partial rerouting (option A, late release) user C is user determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. User B continues to alert to the forwarding user. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERT FAC INVITE INVITE INVITE INVITE 486 486 486 486 ACK ACK ACK ACK CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC SISI_XXSSCFNR 19 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR. User D forwards the call to back to user B. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network CFNR supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 408
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.7.2 CFNR - SII
|
SII_XXSSCFNR 01 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR/ Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR , option B, immediate release, and no notification. User B has a point-to- multipoint Configuration. Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 REL RLC SETUP ALERTING CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 409 SII_XXSSCFNR 02 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR/ Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR , option A, late release, no notification. User B has a point-to-multipoint Configuration. Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 SETUP REL ALERTING RLC CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 410 SII_XXSSCFNR 03 ISDN reference to: ETSI EN 300 403-1 [i.3] clauses 9.2.2, 9.2.4.4 and 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR/ Configuration: The user A and the user C are in network N1. The user B is in network N2 is provided with CFNR "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes. User B has a point-to-multipoint Configuration. Selection criteria: CFNR supported, option B, immediate release CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. User A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). ISDN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 REL RLC 181 181 181 181 SETUP ALERTING CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 411 SII_XXSSCFNR 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No). User B has a point-to- multipoint Configuration. Selection criteria: CFNR supported, option B, immediate release CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 REL RLC 181 181 181 181 SETUP ALERTING CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 412 SII_XXSSCFNR 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No). User B has a point-to-multipoint Configuration. Selection criteria: CFNR supported, option B, immediate release CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 REL RLC SETUP ALERTING CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 413 SII_XXSSCFNR 06 ISDN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR/ Configuration: The user A and the user C are in network N1. The user B is provided with CFNR "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes). User B has a point-to-multipoint Configuration. Selection criteria: CFNR supported, option A, late release CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. User A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). ISDN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 181 181 181 181 SETUP DISC ALERTING REL CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 414 SII_XXSSCFNR 07 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No). User B has a point-to-multipoint Configuration. Selection criteria: CFNR supported, option A, late release CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 181 181 181 181 SETUP DISC ALERTING REL CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 415 SII_XXSSCFNR 08 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No. User B has a point-to-multipoint Configuration. Selection criteria: CFNR supported, option A, late release CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 SETUP ALERTING DISC CONNECT REL 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 416 SII_XXSSCFNR 09 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR . User B has a point-to-point Configuration. Selection criteria: Partial rerouting during alerting - no notification Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 FAC REL RLC SETUP ALERTING CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 417 SII_XXSSCFNR 10 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes). User B has a point-to- point Configuration. Selection criteria: Partial rerouting during alerting - full notification Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. User A is notified of call diversion and informed of the diverted-to number and user C is informed of the forwarding number (user B has presentation allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 FAC REL RLC 181 181 181 181 SETUP ALERTING CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 418 SII_XXSSCFNR 11 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No). User B has a point-to-point Configuration. Selection criteria: Partial rerouting during alerting Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 FAC DISC REL 181 181 181 181 SETUP ALERTING CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 419 SII_XXSSCFNR 12 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No). User B has a point-to-point Configuration. Selection criteria: Partial rerouting during alerting - no notification Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 FAC REL RLC SETUP ALERTING CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 420 SII_XXSSCFNR 13 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR . User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network CFNR option B, immediate release, no notification user C is user determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 REL RLC SETUP REL # 17 RLC 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 421 SII_XXSSCFNR 14 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network CFNR supported option B, immediate release, no notification user C is network determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 REL RLC 181 181 181 181 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 422 SII_XXSSCFNR 15 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR . User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network CFNR option A, late release, no notification user C is user determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. User B continues to alert to the forwarding user. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 181 181 181 181 SETUP REL # 17 RLC CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 423 SII_XXSSCFNR 16 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR. User B has a point-to-multipoint Configuration. Selection criteria: Call forwarding by the network CFNR supported option A, late release, no notification user C is network determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. User B continues to alert to the forwarding user. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 424 SII_XXSSCFNR 17 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR supported, partial rerouting. User B has a point-to-point Configuration. Selection criteria: Call forwarding by the network CFNR supported, partial rerouting (option B, immediate release) user C is network determined network busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERT FAC REL RLC INVITE INVITE INVITE 486 486 486 ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 425 SII_XXSSCFNR 18 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR supported, partial rerouting. User B has a point-to-point Configuration. Selection criteria: Call forwarding by the network CFNR, partial rerouting (option A, late release) user C is user determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. User B continues to alert to the forwarding user. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE ALERTING 180 180 180 180 FAC 181 181 181 181 SETUP REL # 17 RLC CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 426
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.8 Call Deflection
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.8.1 CD - SIS
|
SIS_XXSSCD 01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CD Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Call Deflection immediate response (option B, immediate release). User B has a point-to- multipoint Configuration. Selection criteria: User B has activated the, Call Deflection immediate response (option B, immediate release) Test purpose: Ensure that when user A calls user B, the call is deflected immediate to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE INVITE RLC 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 427 SIS_XXSSCD 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CD Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with Call Deflection immediate response (option B, immediate release) "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes,). User B has a point-to-multipoint Configuration. Selection criteria: User B has activated the Call Deflection immediate response (option B, immediate release) Test purpose: Ensure that when user A calls user B, the call is deflected immediate to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is informed of the forwarding number (user B has presentation allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE INVITE RLC 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 428 SIS_XXSSCD 03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CD Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with, Call Deflection immediate response (option B, immediate release) "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No). User B has a point-to-multipoint Configuration. Selection criteria: Call Deflection immediate response (option B, immediate release) Test purpose: Ensure that when user A calls user B, the call is deflected immediate to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE INVITE RLC 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 429 SIS_XXSSCD 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CD Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with Call Deflection immediate response (option B, immediate release) User C is provided with CD immediate response. "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). User B has a point-to-multipoint Configuration. Selection criteria: User B has activated the Call Deflection immediate response (option B, immediate release) Test purpose: Ensure that when user A calls user B, the call is deflected immediate to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no TIR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC REL INVITE INVITE INVITE INVITE RLC 100 Trying 180 180 180 180 180 180 180 180 180 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE BYE BYE BYE BYE 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 430 SIS_XXSSCD 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CD Configuration: The user B is in network N2 and is provided with Call Deflection immediate response (option B, immediate release). User B has a point-to-multipoint Configuration. Selection criteria: User B has activated the Call Deflection immediate response (option B, immediate release) Test purpose: To verify that a call is released correctly if Call Deflection immediate response (option B, immediate release) was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE INVITE RLC 486 486 486 486 ACK ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK SIS_XXSSCD 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-SIP/Supplementary_services/CD Configuration: User B has a point-to-multipoint Configuration. Selection criteria: User B has activated the, Call Deflection immediate response (option B, immediate release) Test purpose: To verify that a call is released correctly if Call Deflection immediate response (option B, immediate release) was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 1 ISDN 2 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL INVITE INVITE INVITE RLC 486 486 486 ACK ACK ACK 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 431
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.8.2 CD - SII
|
SII_XXSSCD 01 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CD Configuration: The user B is provided has activated the CALL DEFLECTION, option B, immediate release. User B has a point-to-multipoint Configuration. Selection criteria: User B has activated the CALL DEFLECTION, option B, immediate release Test purpose: Ensure that when user A calls user B, the call is deflected immediate response to user C. Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 SETUP REL ALERTING RLC 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 432 SII_XXSSCD 02 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CD Configuration: The user B has activated the CALL DEFLECTION, option B, immediate release "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = Yes. User B has a point-to-multipoint Configuration. Selection criteria: User B has activated the CD immediate response, option B, immediate release Test purpose: Ensure that when user A calls user B, the call is deflected immediate to user C, user A is notified of call diversion and informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is informed of the forwarding number (user B has presentation allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 SETUP REL ALERTING RLC 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 433 SII_XXSSCD 03 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CD Configuration: The user B has activated the CALL DEFLECTION immediate response, option B, immediate release "calling user is notified of call diversion with diverted to number" = Yes, "diverting number is released to the diverted-to user" = No. User B has a point-to-multipoint Configuration. Selection criteria: User B has activated the CD immediate response, option B, immediate release Test purpose: Ensure that when user A calls user B, the call is deflected immediate response to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation not allowed - COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 SETUP REL ALERTING RLC 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 434 SII_XXSSCD 04 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CD Configuration: The user B has activated the CALL DEFLECTION immediate response, option B, immediate release "calling user is notified of call diversion with diverted to number" = No, "diverting number is released to the diverted-to user" = No. User B has a point-to- multipoint Configuration. Selection criteria: User B has activated the CALL DEFLECTION immediate response, option B, immediate release Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, user A is notified of call diversion and not informed of the diverted-to number (user C has presentation allowed - no COLR) and user C is not informed of the forwarding number (user B has presentation not allowed). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC SETUP REL ALERTING RLC 180 180 180 180 CONNECT 200 OK 200 OK 200 OK 200 OK ACK ACK ACK ACK DISC BYE BYE BYE BYE REL 200 OK BYE 200 OK BYE 200 OK BYE 200 OK BYE RLC SII_XXSSCD 05 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CD Configuration: The user B is in network N2 and is provided with CD during alerting. User B has activated the CALL DEFLECTION during alerting , option B, immediate release. User B has a point- to-multipoint Configuration. Selection criteria: User B has activated the CALL DEFLECTION during alerting , option B, immediate release Test purpose: To verify that a call is released correctly if CD performed by the UE was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC SETUP REL 181 181 181 181 RLC #17 RLC 486 486 486 486 ACK ACK ACK ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 435 SII_XXSSCD 06 ISDN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-ISDN-ISDN/Supplementary_services/CD Configuration: The user B is in network N2 and is provided with the CALL DEFLECTION during alerting, option B, immediate release. User B has a point-to-multipoint Configuration. Selection criteria: User B has activated the CALL DEFLECTION during alerting , option B, immediate release Test purpose: To verify that a call is released correctly if CD performed by the UE was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ISDN 2 ISDN 1 MGCF I-CSCF S-CSCF P-CSCF UE-A UE-C INVITE INVITE INVITE SETUP INVITE FAC 181 181 181 181 REL RLC 486 486 486 486 ACK ACK ACK ACK
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.9 Three Party service 3PTY
|
SII_xxSS3PTY01 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI TS 129 163 [i.20] TSS reference: SIP-ISDN-ISDN/Supplementary_services/3PTY Selection criteria: The user B is in network N1 and is provided with 3PTY. The user A is in network N2 and user C is in the network N1 User B has a point-to-multipoint Configuration. Test purpose: Ensure that user B can establish a three-way conversation call with user A and user C and release the Active-Idle connection (B-C). The call clearing procedure is performed from user A after the Active-Held call has been retrieved. ISDN Parameter values: BC =PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 436 SII_xxSS3PTY02 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2, figure A.2 NGN reference to: ETSI TS 129 163 [i.20] TSS reference: ISDN-ISDN/Supplementary_services/3PTY/ Selection criteria: The user B is in network N1 and is provided with 3PTY. The user A is in network N2 and user C is in the network N1 User B has a point-to-multipoint Configuration. Test purpose: Ensure that user B can establish a three-way conversation call with user A and user C and release the Active-Held connection (B-C). The call clearing procedure is performed from user B. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SII_xxSS3PTY03 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI TS 129 163 [i.20] TSS reference: SIP-ISDN-ISDN/Supplementary_services/3PTY Selection criteria: The user B is in network N1 and is provided with 3PTY. The user A is in network N2 and user C is in the network N1 User B has a point-to-multipoint Configuration. Test purpose: Ensure that user B can establish a three-way conversation call with user A and user C and release the Active-Idle connection (A-B). The call clearing procedure is performed from user B. ISDN Parameter values: BC =PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 437 SII_xxSS3PTY04 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI TS 129 163 [i.20] TSS reference: SIP-ISDN-ISDN/Supplementary_services/3PTY Selection criteria: The user B is in network N1 and is provided with 3PTY. The user A is in network N2 and user C is in the network N1 User B has a point-to-multipoint Configuration. Test purpose: Ensure that user B can establish a three-way conversation call with user A and user C and release the Active-Idle connection (A-B). The call clearing procedure is performed from user C after the Active-Held call has been retrieved. ISDN Parameter values: BC =PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIS_xxSS3PTY05 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ETSI TS 129 163 [i.20] TSS reference: SIP-ISDN-ISDN/Supplementary_services/3PTY Selection criteria: The user B is in network N1 and is provided with 3PTY. The user A and user C are in the network N2. User B has a point-to-multipoint Configuration. Test purpose: Ensure that user B can establish a three-way conversation call with user A and user C and B release the Active-Idle connection (B-C). The call clearing procedure is performed from user A after the Active-Held call has been retrieved. ISDN Parameter values: BC =PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 438 SIS_xxSS3PTY06 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2, figure A.2 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: ISDN-ISDN/Supplementary_services/3PTY/211702 Selection criteria: The user B is in network N1 and is provided with 3PTY.The user A and user C are in the network N2. User B has a point-to-multipoint Configuration. Test purpose: Ensure that user B can establish a three-way conversation call with user A and user C and B release the Active-Held connection (B-C). The call clearing procedure is performed from user B. ISDN Parameter values: BC = PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIS_xxSS3PTY07 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: SIP-ISDN-ISDN/Supplementary_services/3PTY Selection criteria: The user B is in network N1 and is provided with 3PTY. The user A and user C are in the network N2. User B has a point-to-multipoint Configuration. Test purpose: Ensure that user B can establish a three-way conversation call with user A and user C and B release the Active-Idle connection (A-B). The call clearing procedure is performed from user B. ISDN Parameter values: BC =PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 439 SIS_xxSS3PTY08 ISDN reference to: ETSI EN 300 188-1 [i.6], clause 9.2 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: SIP-ISDN-ISDN/Supplementary_services/3PTY Selection criteria: The user B is in network N1 and is provided with 3PTY. The user A and user C are in the network N2. User B has a point-to-multipoint Configuration. Test purpose: Ensure that user B can establish a three-way conversation call with user A and user C and B release the Active-Idle connection (A-B). The call clearing procedure is performed from user C after the Active-Held call has been retrieved. ISDN Parameter values: BC =PIXIT SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments:
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.10 TP
|
SI_XXSSTP01 ISDN reference to: ETSI EN 300 141-1 [i.7], clause 7 ETSI EN 300 196-1 [i.9], clause 7.1 NGN reference to: ITU-T Q.1912.5 [51], annex B.10 TSS reference: SIP-ISDN/Supplementary_services/TP Selection criteria: The called user is provided with TP. User B has a point-to-multipoint Configuration. Test purpose: Ensure that the user B can provide the suspend and resume procedure ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK INVITE SUSPEND 200 OK INVITE SUS_ACK ACK INVITE RESUME 200 OK INVITE RES_ACK ACK BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 440 SI_XXSSTP02 ISDN reference to: ETSI EN 300 141-1 [i.7], clause 7 ETSI EN 300 196-1 [i.9], clause 7.1 NGN reference to: ITU-T Q.1912.5 [51], annex B.10 TSS reference: SIP-ISDN/Supplementary_services/TP Selection criteria: User B has a point-to-multipoint Configuration. Test purpose: Ensure that the user B can provide the suspend and resume procedure and that the call can be released from the calling user during the call suspension. ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK INVITE (sendonly) SUSPEND 200 OK INVITE (reconly) SUS_ACK ACK BYE 200 OK BYE SI_XXSSTP03 ISDN reference to: ETSI EN 300 141-1 [i.7], clause 7 ETSI EN 300 196-1 [i.9], clause 7.1 NGN reference to: ITU-T Q.1912.5 [51], annex B.10 TSS reference: SIP-ISDN/Supplementary_services/TP Selection criteria: User B has a point-to-multipoint Configuration. Test purpose: Ensure that the SUT stop temporarily one or more unicast media streams if a SUS message (ISDN subscriber initiated) was received. Ensure that the connection is cleared after T2 was expired in the PSTN. ISDN Parameter values: SETUP = 3,1 kHz audio; SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONN ACK INVITE SUSPEND 200 OK INVITE SUS_ACK T2 expiry BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 441
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.11 CUG
|
SI_XXSSCUG01 ISDN reference to: ETSI EN 300 138-1 [i.10], clauses 9.2.2, 9.2.4 TSS reference: SIP-ISDN/Supplementary_services/CUG/ Selection criteria: Term: The called user belongs to CUG with the following CUG supplementary options: not IA; not ICB. User B has a point-to-multipoint Configuration. Test purpose: Ensure that when the called user belongs to a CUG with incoming access not allowed and not incoming calls barred within the CUG, after the receipt of an INVITE message the network initiate call clearing to the calling user with 500 Server internal errors. ISDN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE 500 Server Internal Error ACK SI_XXSSCUG02 ISDN reference to: ETSI EN 300 138-1 [i.10], clauses 9.2.2, 9.2.4 TSS reference: SIP-ISDN/Supplementary_services/CUG/ Selection criteria: Term: The called user belongs to CUG with the following CUG supplementary options: not IA; ICB. User B has a point-to-multipoint Configuration. Test purpose: Ensure that when the called user belongs to a CUG with incoming access not allowed and incoming calls barred within the CUG, after the receipt of an INVITE message the network initiate call clearing to the calling user with 500 Server internal errors. ISDN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE 500 Server Internal Error ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 442 SI_XXSSCUG03 ISDN reference to: ETSI EN 300 138-1 [i.10], clauses 9.2.2, 9.2.4 TSS reference: SIP-ISDN/Supplementary_services/CUG/ Selection criteria: Term: The called user belongs to CUG with the following CUG supplementary options: IA; not ICB. User B has a point-to-multipoint Configuration. Test purpose: Ensure that when the called user belongs to a CUG with incoming access allowed and not incoming calls barred within the CUG, after the receipt of an INVITE message the call is successful on a "non CUG call" base. ISDN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE 100 Trying SETUP 180 Ringing ALERT 200 OK INVITE CON ACK Conversation BYE DISC 200 OK BYE REL SI_XXSSCUG04 ISDN reference to: ETSI EN 300 138-1 [i.10], clauses 9.2.2, 9.2.4 TSS reference: SIP-ISDN/Supplementary_services/CUG/ Selection criteria: Term: The called user belongs to CUG with the following CUG supplementary options: IA; ICB. User B has a point-to-multipoint Configuration. Test purpose: Ensure that when the called user belongs to a CUG with incoming access allowed and incoming calls barred within the CUG, after the receipt of an INVITE message the call is successful on a "non CUG call" base. ISDN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT ISDN INVITE 100 Trying SETUP 180 Ringing ALERT 200 OK INVITE CON ACK Conversation BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 443
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.12 Hold
|
SI_XXSSHOLD 01 ISDN reference to: ETSI EN 300 141-1 [i.7] NGN reference to: ITU-T Q.1912.5 [51], annex B.10 TSS reference: SIP-ISDN/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams ISDN selection criteria: Support the generic notification procedure for HOLD supplementary service Test purpose: Ensure that a party can put the other party on hold at any time after the call is answered and before call clearing has begun. Ensure that a party can retrieve the call previously put on hold. The calling party should be able to put the other party on hold The calling party should be able to retrieve the other party The called party should be able to put the other party on hold The called party should be able to retrieve the other party SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition SDP: a=sendonly (put on hold) a=sendrecv or omitted (retrieve the call) o= . . <version incremented> ISDN Parameter values: SETUP = 3,1 kHz audio Comments: SIP MGCF ISDN INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONNECT INVITE(sendonly) NOTIFY Remote HOLD 200 OK INVITE(recvonly) INVITE(sendrecv) NOTIFY - Remote RETRIEVAL 200 OK INVITE(sendrecv) INVITE(sendonly) HOLD 200 OK INVITE(recvonly) INVITE(sendrecv) RETRIEVE 200 OK INVITE(sendrecv) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 444 SI_XXSSHOLD 02 ISDN reference to: ETSI EN 300 141-1 [i.7] NGN reference to: ITU-T Q.1912.5 [51], annex B.10 TSS reference: SIP-ISDN/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams ISDN selection criteria: Support the generic notification procedure for HOLD supplementary service Support the invocation of the service in the alerting state Test purpose: Ensure that a party can put the other party on hold in the alerting state. Ensure that the party can retrieve the call previously put on hold. The calling party should be able to put the other party on hold The calling party should be able to retrieve the other party SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition SDP: a=sendonly (put on hold) a=sendrecv or omitted (retrieve the call) o= . . <version incremented> ISDN Parameter values: SETUP = 3,1 kHz audio; Comments: SIP MGCF ISDN INVITE SETUP 180 Ringing ALERT UPDATE(sendonly) NOTIFY - Remote HOLD 200 OK UPDATE(recvonly) UPDATE(sendrecv) NOTIFY - Remote RETRIEVAL 200 OK UPDATE(sendrecv) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 445 SI_XXSSHOLD 03 ISDN reference to: ETSI EN 300 141-1 [i.7] NGN reference to: ITU-T Q.1912.5 [51], annex B.10 TSS reference: SIP-ISDN/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams ISDN selection criteria: Support the generic notification procedure for HOLD supplementary service Test purpose: Ensure that a party can put the other party on hold at any time after the call is answered and before call clearing has begun. Ensure that a party can retrieve the call previously put on hold. The calling party should be able to put the other party on hold The calling party should be able to retrieve the other party SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition SDP: a=sendonly (put on hold) a=sendrecv or omitted (retrieve the call) o= . . <version incremented> ISDN Parameter values: SETUP = 3,1 kHz audio Comments: SIP MGCF ISDN INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONNECT UPDATE(sendonly) Notify - Remote HOLD 200 OK INVITE(recvonly) UPDATE(sendrecv) Notify - Remote RETRIEVAL 200 OK UPDATE(recvonly) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 446 SI_XXSSHOLD 04 ISDN reference to: ETSI EN 300 141-1 [i.7] NGN reference to: ITU-T Q.1912.5 [51], annex B.10 TSS reference: SIP-ISDN/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams The MGCF sends the update of the media stream in an UPDATE message ISDN selection criteria: Support the generic notification procedure for HOLD supplementary service Test purpose: Ensure that a party can put the other party on hold at any time after the call is answered and before call clearing has begun. Ensure that a party can retrieve the call previously put on hold. The called party should be able to put the other party on hold The called party should be able to retrieve the other party SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition SDP: a=sendonly (put on hold) a=sendrecv or omitted (retrieve the call) o= . . <version incremented> ISDN Parameter values: SETUP = 3,1 kHz audio Comments: SIP MGCF ISDN INVITE SETUP 180 Ringing ALERT 200 OK INVITE CONNECT UPDATE(sendonly) HOLD 200 OK INVITE(recvonly) UPDATE(sendrecv) RETRIEVE 200 OK UPDATE(recvonly) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 447 SI_XXSSHOLD 05 ISDN reference to: ETSI EN 300 141-1 [i.7] NGN reference to: ITU-T Q.1912.5 [51], annex B.10 TSS reference: SIP-ISDN/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams ISDN selection criteria: Support the generic notification procedure for HOLD supplementary service Test purpose: Ensure that a party can put the other party on hold at any time after the call is answered and before call clearing has begun. Ensure that a party in held state can put the remote party put on hold. Ensure that a party can retrieve the call previously put on hold. The calling party should be able to put the other party on hold The called party should be able to put the other party on hold The calling party should be able to retrieve the other party The called party should be able to retrieve the other party SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition SDP: a=sendonly or a=inactive (put on hold) a=sendrecv or a=recvonly or omitted (retrieve the call) o= . . <version incremented> ISDN Parameter values: SETUP = 3,1 kHz audio; Comments: SIP MGCF ISDN INVITE 180 Ringing 200 OK INVITE INVITE(sendonly) NOTIFY- Remote HOLD 200 OK INVITE(recvonly) INVITE(inactive) HOLD 200 OK INVITE(inactive) INVITE(recvonly) Notify - Remote Retrieval 200 OK INVITE(sendonly) INVITE(sendrecv) RETRIEVE 200 OK INVITE(sendrecv) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 448 SI_XXSSHOLD 06 ISDN reference to: ETSI EN 300 141-1 [i.7] NGN reference to: ITU-T Q.1912.5 [51], annex B.10 TSS reference: SIP-ISDN/SS/HOLD/ SIP selection criteria: Support the temporarily stops sending one or more unicast media streams ISDN selection criteria: Support the generic notification procedure for HOLD supplementary service Test purpose: Ensure that a party can put the other party on hold at any time after the call is answered and before call clearing has begun. Ensure that a party in held state can put the remote party put on hold. Ensure that a party can retrieve the call previously put on hold. The calling party should be able to put the other party on hold The called party should be able to put the other party on hold The called party should be able to retrieve the other party The calling party should be able to retrieve the other party SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition SDP: a=sendonly or a=inactive (put on hold) a=sendrecv or a=recvonly or omitted (retrieve the call) o= . . <version incremented> ISDN Parameter values: SETUP = 3,1 kHz audio Comments: SIP MGCF ISDN INVITE 180 Ringing 200 OK INVITE INVITE(sendonly) NOTIFY - Remote HOLD 200 OK INVITE(recvonly) INVITE(inactive) HOLD 200 OK INVITE(inactive) INVITE(recvonly) RETRIEVE 200 OK INVITE(sendonly) INVITE(sendrecv) NOTIFY - Remote Retrieval 200 OK INVITE(sendrecv) ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 449
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.13 CONF
|
SI_XXSSCONF01 ISDN reference to: ETSI EN 300 185-1 [i.8] NGN reference to: ETSI TS 124 605 [46] ETSI TS 124 147 [i.11] TSS reference: SIP-ISDN/SS/CONF/ SIP selection criteria: Support that a party can put the other party on hold after then calling user has provided all the information necessary for processing the call ISDN selection criteria: Support of service conference call, add-on (conf) Test purpose: Ensure that the SUT in the confirmed dialogue stop the temporarily sending one or more unicast media streams if a HOLD was sent and resume the session after the BeginCONF was received due to the CONF supplementary service. If the media stream is either in state "sendonly" or "inactive" then: INVITE with the attribute line a_LINE_VA, or omitted attribute line, else: no mapping SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition SDP: a= a_LINE_VA (table 9) or a line is omitted ISDN Parameter values: SETUP = 3,1 kHz audio; Comments: SIP MGCF ISDN INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONNECT BeginCONF BYE DISC 200 OK BYE RELEASE REL_COMP ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 450 SI_XXSSCONF03 ISDN reference to: ETSI EN 300 185-1 [i.8] NGN reference to: ETSI TS 124 605 [46] ETSI TS 124 147 [i.11] TSS reference: SIP-ISDN/SS/CONF/ SIP selection criteria: Support that a party can put the other party on hold after then calling user has provided all the information necessary for processing the call ISDN selection criteria: Support of service conference call, add-on (conf) Test purpose: Ensure that the SUT in the confirmed dialogue stops the temporarily sending one or more unicast media streams if a FACILITY message isolatedCONF and resume the media stream if reattachedCONF was received due to the CONF supplementary service. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition SDP: a= a_LINE_VA (table 10) or a line is omitted ISDN Parameter values: SETUP = 3,1 kHz audio; Comments: SIP MGCF ISDN INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONNECT BeginCONF INVITE(sendonly) IsolatedCONF 200 OK INVITE(recvonly) ACK INVITE(sendrecv) ReattachCONF 200 OK INVITE(sendrecv) ACK BYE DISC 200 OK BYE RELEASE REL_COMP ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 451 SI_XXSSCONF05 ISDN reference to: ETSI EN 300 185-1 [i.8] NGN reference to: ETSI TS 124 605 [46] ETSI TS 124 147 [i.11] TSS reference: SIP-ISDN/SS/CONF/ SIP selection criteria: Conference event package supported PICS [43] 1/1 ISDN selection criteria: Test purpose: Conference notification information is mapped into "conference established" Upon the receipt of a conference information document with the <conference-state- type> element active is set to 'true', the ISDN Network shall send a NOTIFY message with a notification 'conference established'. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition NOTIFY 1: <conference-state> <active>true</active> if present ISDN Parameter values: SETUP = 3,1 kHz audio Comments: SIP MGCF ISDN INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONNECT NOTIFY 1 NOTIFY(conference established) 200 OK NOTIFY BYE DISCONNECT 200 OK BYE RELEASE RELEASE COMPLETE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 452 SI_XXSSCONF06 ISDN reference to: ETSI EN 300 185-1 [i.8] NGN reference to: ETSI TS 124 605 [46] ETSI TS 124 147 [i.11] TSS reference: SIP-ISDN/SS/CONF/ SIP selection criteria: Conference event package supported PICS [43] 1/1 ISDN selection criteria: Test purpose: Conference notification information is mapped into "other party added". Upon the receipt of a conference information document with the <endpoint-type> and the element status of endpoint-status-type is set to 'connected' and it was not set to 'on-hold' before and the Contact URI in the element entity is not the address of the served PSTN/ISDN participant, the ISDN Network shall send a NOTIFY message 'other party added'. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition NOTIFY 1: <conference-state> <active>true</active> if present NOTIFY 2: <endpoint entity=endpoint SIPx URI <status>connected</status> ISDN Parameter values: SETUP = 3,1 kHz audio Comments: SIP MGCF ISDN INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONNECT NOTIFY 1 NOTIFY(conference established) 200 OK NOTIFY NOTIFY 2 NOTIFY(other party added) 200 OK NOTIFY BYE DISCONNECT 200 OK BYE RELEASE RELEASE COMPLETE The Connection to SIP2 is not shown in this message flow. ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 453 SI_XXSSCONF11 ISDN reference to: ETSI EN 300 185-1 [i.8] NGN reference to: ETSI TS 124 605 [46], clause 4.7.1.1.1 ETSI TS 124 147 [i.11] TSS reference: SIP-ISDN/SS/CONF/ SIP selection criteria: Conference event package supported PICS [43] 1/1 ISDN selection criteria: Test purpose: Conference notification information is mapped into "other party disconnected". Upon the receipt of a conference information document with the <endpoint-type> and the element status of endpoint-status-type is set to 'disconnected' and the element joining-method of joining-type is not set to 'focus-owner, the ISDN network shall send a NOTIFY message 'other party disconnected'. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition NOTIFY 3: <endpoint entity=endpoint SIPx URI <status>disconnected</status> ISDN Parameter values: SETUP = 3,1 kHz audio Comments: SIP MGCF ISDN INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONNECT NOTIFY 1 NOTIFY(conference established) 200 OK NOTIFY NOTIFY 2 NOTIFY(other party added) 200 OK NOTIFY NOTIFY 3 NOTIFY(other party disconnected) 200 OK NOTIFY BYE DISCONNECT 200 OK BYE RELEASE RELEASE COMPLETE The session with SIP 2 is not shown in this message flow. ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 454 SI_XXSSCONF12 ISDN reference to: ETSI EN 300 185-1 [i.8] NGN reference to: ETSI TS 124 605 [46] ETSI TS 124 147 [i.11] TSS reference: SIP-ISDN/SS/CONF/ SIP selection criteria: Conference event package not supported NOT PICS [43] 1/1 ISDN selection criteria: Test purpose: Conference notification information is not mapped to ISDN Upon the receipt of a conference information document the conference notification information is not mapped to the PSTN side. No NOTIFY is sent to the ISDN user. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition NOTIFY 1: <conference-state> <active>true</active> if present NOTIFY 2: <endpoint entity=endpoint SIPx URI <status>connected</status> ISDN Parameter values: SETUP = 3,1 kHz audio; Comments: SIP MGCF ISDN INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONNECT NOTIFY 1 200 OK NOTIFY NOTIFY 2 200 OK NOTIFY BYE DISCONNECT 200 OK BYE RELEASE RELEASE COMPLETE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 455 SI_XXSSCONF13 SIP reference: IETF RFC 3261 [28] NGN reference: ITU-T Q.734.1 [14], clause 2.7 TSS reference: SIP-ISUP/SS/CONF/ SIP selection criteria: The stop and retrieve of media streams is not supported ISUP selection criteria: Test purpose: Ensure that the SUT on receipt of FACILITY messages due to the CONF supplementary service, no mapping, no disrupting of the SIP procedure. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition No mapping ISDN Parameter values: SETUP = 3,1 kHz audio; Comments: SIP MGCF ISUP INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONNECT HOLD BeginCONF IsolatedCONF ReattachCONF BYE DISCONNECT 200 OK BYE RELEASE RELEASE COMPLETE SI_XXSSCONF14 ISDN reference to: ETSI EN 300 185-1 [i.8] NGN reference to: ETSI TS 124 605 [46], clause 4.7.1.1.1 ETSI TS 124 147 [i.11] TSS reference: SIP-ISDN/SS/CONF/ SIP selection criteria: ISDN selection criteria: Test purpose: The referring of MGCF is not possible call is established Ensure that a REFER request received by the MGCF is not successful. The request is rejected with 403 Forbidden. The CS -site is not affected. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition REFER: Request URI contained the conference URI Refer-To contains the URI of ISDNx, method=invite Referred-By contains SIP or tel URI of SIPx ISDN Parameter values: SETUP = 3,1 kHz audio Comments: SIP MGCF ISDN INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONNECT REFER 403 Forbidden ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 456 SI_XXSSCONF15 ISDN reference to: ETSI EN 300 185-1 [i.8] NGN reference to: ETSI TS 124 605 [46], clause 4.7.1.1.1 ETSI TS 124 147 [i.11] TSS reference: SIP-ISDN/SS/CONF/ SIP selection criteria: ISDN selection criteria: Test purpose: The referring of MGCF is not possible call is not established Ensure that a REFER request received by the MGCF is not successful. The request is rejected with 403 Forbidden. The CS -site is not affected. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition REFER: Request URI contained the conference URI Refer-To contains the URI of ISDNx, method=invite Referred-By contains SIP or tel URI of SIPx ISDN Parameter values: SETUP = 3,1 kHz audio; Comments: SIP MGCF ISDN REFER 403 Forbidden
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.3.2.14 Call waiting (CW)
|
SI_XXSSCW01 SIP reference: IETF RFC 3261 [28] ISUP reference: ITU-T Q.1912.5 [51], annex B.9 TSS reference: SIP-ISDN/SS/CW/ SIP selection criteria: ISDN selection criteria: Test purpose: Ensure that when the ISDN SUT indicates that a Call is a waiting call the SIP signalling procedure is not disrupted. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition No mapping ISDN Parameter values: SETUP = 3,1 kHz audio; Comments: SIP SUT ISDN INVITE SETUP 180 Ringing ALERTING 200 OK INVITE CONN ACK Conversation BYE DISC 200 OK BYE REL ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 457
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.2.2.15 Anonymous Call Rejection (ACR)
|
SI_XXSSACR01 SIP reference: IETF RFC 3261 [28] ISUP reference: ITU-T Q.1912.5 [51], annex B.8 TSS reference: SIP-ISDN/SS/ACR/ SIP selection criteria: ISDN selection criteria: An implementation according ETSI EN 383 001 [49] Test purpose: Ensure that the SUT, if a destination user has subscribed the ACR supplementary service, the call attempt is rejected with a 603 Decline: Reason header field Reason: Q.850 [22];cause=24 due to ACR supplementary service" SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition INVITE: Privacy-header = "id" 603 Decline: Reason header field Reason: Q.850 [22];cause=24 ISDN Parameter values: SETUP = 3,1 kHz audio Comments: SI_XXSSACR02 SIP reference: IETF RFC 3261 [28] ISUP reference: ITU-T Q.1912.5 [51], annex B.8 TSS reference: SIP-ISUP/SS/ACR/ SIP selection criteria: ISDN selection criteria: An implementation according ETSI EN 383 001 [49] Send a Calling Party Number with an Number Presentation restriction Indicator set to "presentation restricted by the network" if no P-Asserted -Identity header field has not been received or not in the format "+"CC+NDC+SN Test purpose: Ensure that the SUT if a destination user has subscribed the ACR supplementary service, the call attempt is successful SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition INVITE: No P-Asserted-Identity header field and no Privacy header field present ISDN Parameter values: Calling party number Address presentation restriction is set to "Presentation restricted by the network" Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 458
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.4 Test purposes for PSTN - SIP
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.4.1 Basic call
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.4.1.1 Basic call Successful
|
Successful PSTN PS_AU_01 PSTN reference to: ETSI EN 300 899-1 [23], clause 2.1.1 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: PSTN-SIP/Basic_call/Successful/3,1 kHz audio Selection criteria: Test purpose: Ensure that the PSTN can in the overlap proceeding state handle the call establishment correctly when the SIP user answers with a Session Progress message following by a 180 Ringing message. Ensure that in the active call state the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). In case when the parameter in the SDP rtpmap:<dynamic-PT> is used the codecs in table 8 applies. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSTN SUT SIP Off hook Dial number INVITE 183 Session Progress Ringing tone 180 Ringing 200 OK INVITE ACK Communication On hook BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 459 PS_AU_02 PSTN reference to: ETSI EN 300 899-1 [23], clause 2.1.1 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: PSTN-SIP/Basic_call/Successful/3,1 kHz audio Selection criteria: Test purpose: Ensure that the PSTN in the Outgoing call proceeding state can handle the call establishment correctly when the SIP user answers with a 200 OK message. Ensure that in the active call state the voice/data transfer is performed correctly (e.g. testing QoS parameters). In case when the parameter in the SDP rtpmap:<dynamic-PT> is used the codecs in table 8 applies. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSTN SUT SIP Off hook Dial number INVITE 200 OK INVITE ACK Communication On hook BYE 200 OK BYE PS_AU_03 PSTN reference to: ETSI EN 300 899-1 [23], clause 2.1.1 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: PSTN-SIP/Basic_call/Successful/3,1 kHz audio / Selection criteria: Test purpose: Ensure that the call establishment and the call clearing procedure are performed correctly when the calling user clears after answering. The called user shall receive a BYE message. The Reason header should contain Cause Value #16. Ensure that in the Call Delivered call state the transfer of tone or announcement on the B- channel is performed correctly. In case when the parameter in the SDP rtpmap:<dynamic-PT> is used the codecs in table 8 applies. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSTN SUT SIP Off hook Dial number INVITE Ringing tone 180 Ringing 200 OK INVITE ACK Communication On hook BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 460 PS_AU_04 PSTN reference to: ETSI EN 300 899-1 [23], clause 2.1.1 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: PSTN -SIP/Basic_call/Successful/3,1 kHz audio/ Selection criteria: Test purpose: Ensure that the call clearing procedure is performed correctly when the called user clears after answering with a BYE message indicating the Cause value # 16 "normal call clearing" in the Reason header field. Ensure that in the Call Delivered call state U4 and disconnect indication state (N12) the transfer of tone or announcement is performed correctly. In case when the parameter in the SDP rtpmap:<dynamic-PT> is used the codecs in table 8 applies. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSTN SUT SIP Off hook Dial number INVITE Ringing tone 180 Ringing 200 OK INVITE ACK Communication Special tone or announcement BYE On hook 200 OK BYE Table 7 m= line b= line a= line <media> <transport> <fmt-list> <modifier>:<ba ndwidth-value> rtpmap: <payload type> <encoding name>/ <clock rate> [/<encoding parameters>] VA_01 audio RTP/AVP 0 and/or 8 AS:64 rtpmap:0 PCMU/8000 and/or rtpmap:8 PCMA/8000 VA_02 audio RTP/AVP 0 (and possibly 8) AS:64 rtpmap:0 PCMU/8000 (and possibly rtpmap:8 PCMA/8000) VA_03 audio RTP/AVP 8 AS:64 rtpmap:8 PCMA/8000 Table 8: Values of codecs for test purposes PS_AU_01 to PS_AU_04 VARIABLE PT Encoding media type clock rate channels VA_01 0 PCMU A 8 000 1 VA_02 3 GSM A 8 000 1 VA_03 4 G723 A 8 000 1 VA_04 5 DVI4 A 8 000 1 VA_05 7 LPC A 8 000 1 VA_06 8 PCMA A 8 000 1 VA_07 9 G722 A 8 000 1 VA_08 12 QCELP A 8 000 1 VA_09 13 CN A 8 000 1 VA_10 18 G729 A 8 000 1 VA_11 Dyn G726-40 A 8 000 1 VA_12 Dyn G726-32 A 8 000 1 VA_13 Dyn G726-24 A 8 000 1 VA_14 Dyn G726-16 A 8 000 1 VA_15 Dyn G729D A 8 000 1 VA_16 Dyn G729E A 8 000 1 VA_17 Dyn GSM-EFR A 8 000 1 ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 461
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.4.1.2 Test purposes for PSTN - SIP Basic call Unsuccessful
|
Unsuccessful PSTN PS_AU_U01 PSTN reference to: ETSI EN 300 899-1 [23], clause 2.1.1 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: PSTN-SIP/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that when the called SIP user is busy, the calling user receives in-band information that the called user is busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSTN SUT SIP Off hook Dial number INVITE Special tone or announcement 486 User Busy ACK On hook PS_AU_U02 PSTN reference to: ETSI EN 300 899-1 [23], clause 2.1.1 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: PSTN-SIP/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that when the calling user clears before answer from the called SIP user the call is cleared SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSTN SUT SIP Off hook Dial number INVITE Ringing tone 180 Ringing On hook CANCEL 200 OK Cancel 487 Request Terminated ACK ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 462 PS_AU_U03 PSTN reference to: ETSI EN 300 899-1 [23], clause 2.1.1 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: PSTN-SIP/Basic_call/Unsuccessful/ Selection criteria: Test purpose: Ensure that when the called SIP user is alerted by not answering before timer Q.18 expires, the network initiate call clearing. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PS_XX_U04 PSTN reference to: ETSI EN 300 899-1 [23], clause 2.1.1 NGN reference to: ITU-T Q.1912.5 [51] IETF RFC 3261 [28] IETF RFC 4566 [25] TSS reference: PSTN-SIP/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that when there is no answer from the called user (there is no response from INVITE messages), the network initiate call clearing to the calling user. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PS_XX_U05 PSTN reference to: ETSI EN 300 899-1 [23], clause 2.1.1 NGN reference to: IETF RFC 3261 [28] IETF RFC 4566 [25] TSS reference: PSTN-SIP/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that the call will be released when the called number is incomplete. The SIP network initiates call clearing 484 Address Incomplete message. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 463
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.4.2 Test purposes for PSTN - SIP Supplementary services
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.4.2.1 CLIP
|
PS_XXSSCLIP01 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 7.1.3 ETSI EN 383 001 [49], clause 7.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.2.2.3 TSS reference: ISDN-SIP/Supplementary_services/CLIP Selection criteria: The called user is provided with CLIP Test purpose: Ensure that when the Calling party number is provided by the network , the Calling party number information elements is correctly delivered to the called (served) with following mapping rules: The SIP P-Asserted-Identity header is Derived from Calling party information element Address Signal The Calling Party Number is mapped into the SIP From header PSTN Parameter: values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSTN SUT UA S Off hook, Dial number INVITE Ringing tone 180 Ringing Connection 200 OK INVITE ACK Conversation On hook BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 464 Display_Options_PA Display name VA_1 "display-name" is supported in the P-Asserted header Presented VA_2 "display-name" is not supported in the P-Asserted header Not presented VA_3 "display-name" is supported in the From header Presented VA_4 "display-name" is not supported in the From header Not presented
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.4.2.2 CLIR
|
PS_XXSSCLIR01 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 7.1.3 ETSI EN 383 001 [49], clause 7.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.2.2.3 IETF RFC 3323 [33] IETF RFC 3325 [34] TSS reference: ISDN-SIP/Supplementary_services/CLIR Selection criteria: The calling user is provided with CLIR permanent mode subscription Test purpose: Ensure that when the Calling party number is provided by the network, Sends a INVITE message where the SIP From header field is set to "anonymous" or "unavailable" and no P-Asserted-Identity header is received PSTN Parameter: values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSTN SUT UA S Off hook, Dial number INVITE Ringing tone 180 Ringing Connection 200 OK INVITE ACK Conversation On hook BYE 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 465 PS_XXSSCLIR02 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 7.1.3 ETSI EN 383 001 [49], clause 7.1.3 ETSI TS 129 163 [i.20], clause 7.2.3.2.2.3 IETF RFC 3323 [33] IETF RFC 3325 [34] TSS reference: ISDN-SIP/Supplementary_services/CLIR Selection criteria: The calling user is provided with CLIR temporary mode subscription Test purpose: Ensure that when the Calling party number is provided by the network, Sends a INVITE message where the SIP From header field is set to "anonymous" or "unavailable" and no P-Asserted-Identity header is received PSTN Parameter: values: SIP Parameter values: a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition Comments: PSTN SUT UA S Off hook, Dial number INVITE Ringing tone 180 Ringing Connection 200 OK INVITE ACK Conversation On hook BYE 200 OK BYE
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.4.2.3 CFU
|
PSP_XXSSCFU 01 NGN reference to: ITU-T Q.1912.5 [51] annex B.6. TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. PSTN Parameter: values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 466 PSP_XXSSCFU 02 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU Selection criteria: User B has activated the CALL DEFLECTION service Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. PSTN Parameter: values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSP_XXSSCFU 03 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported user C is user determined user busy Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is busy. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 467 PSP_XXSSCFU 04 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU Selection criteria: Call forwarding unconditional supported user C is network determined user busy User B has activated the CALL DEFLECTION service Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is busy. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSPP_XXSSCFU 05 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFU. User D forwards the call to back to user B. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 468 PSPP_XXSSCFU 06 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN-ISDN/Supplementary_services/CFU Configuration: The user A and the user C and D are in network N1. The user B is in network N2 and is provided with CFU. User D forwards the call to back to user B. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Network option: hop counter supported N<5 Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSS_XXSSCFU 07 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFU Configuration: The user B is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 469 PSS_XXSSCFU 08 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFU Configuration: The user B is provided with CFU ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C which is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSS_XXSSCFU 09 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFU Configuration: The user B is provided with CFU ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No). Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C which is informed of the forwarding number (user B has presentation allowed). User B is not notified of call diversion. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 470 PSS_XXSSCFU 10 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFU Configuration: User B is provided with CFU ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). Selection criteria: Call forwarding by the network Call forwarding unconditional supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C which is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSS_XXSSCFU 11 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is busy. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 471 PSS_XXSSCFU 12 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported User B has activated the CALL DEFLECTION service Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is busy. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSSP_XXSSCFU 13 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP-PSTN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU. User D forwards the call to back to user B. Selection criteria: Call forwarding busy by the network Call forwarding busy supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 472 PSSP_XXSSCFB 14 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP-PSTN/Supplementary_services/CFU Selection criteria: The user is A in network N1. The user B and the user C are in network N2. User B is provided with CFU. User E forwards the call to back to user B. Network option: hop counter supported N<5 Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, C to D. User D forwards the call to back to user B. User D forwards the call to back to user B. Ensure that the call is released. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments:
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.4.2.4 CFB
|
PSP_XXSSCFB 01 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB. Selection criteria: Call forwarding by the network Call forwarding busy supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. PSTN Parameter: values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSP_XXSSCFB 02 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with CFB Selection criteria: Call forwarding by the network Call forwarding busy supported user C is user determined user busy Test purpose: To verify that a call is released correctly if CFB was not successful. User A calls user B, the call is forwarded to user C who is busy. PSTN Parameter values: SIP Parameter values: a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 473 PSS_XXSSCFB 03 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFB Configuration: The user B is provided with CFB Selection criteria: Call forwarding by the network Call forwarding busy supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSS_XXSSCFB 04 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFB Configuration: The user B is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = Yes). Selection criteria: Call forwarding by the network Call forwarding busy supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C which is informed of the forwarding number (user B has presentation allowed). User B is notified of call diversion. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 474 PSS_XXSSCFB 05 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFB Configuration: The user B is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = Yes, "served user receives notification that the call has been forwarded" = No). Selection criteria: Call forwarding by the network Call forwarding busy supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C which is informed of the forwarding number (user B has presentation allowed). User B is not notified of call diversion. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSS_XXSSCFB 06 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFB Configuration: User B is provided with CFB ("Served user allows the presentation of forwarded to URI to originating user in diversion notification" = Yes, "diverting number is released to the diverted-to user" = No, "served user receives notification that the call has been forwarded" = no). Selection criteria: Call forwarding by the network Call forwarding busy supported CF Notifications supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C which is not informed of the forwarding number (user B has presentation not allowed). User B is not notified of call diversion. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 475 PSS_XXSSCFB 07 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with CFB Selection criteria: Call forwarding by the network Call forwarding busy supported Test purpose: To verify that a call is released correctly if CFB was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSSP_XXSSCFB 08 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU. User D forwards the call to back to user B. Selection criteria: Call forwarding busy by the network Call forwarding busy supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 476 PSSP_XXSSCFB 09 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP-PSTN/Supplementary_services/CFU Selection criteria: The user is A in network N1. The user B and the user C are in network N2. User B is provided with CFU. User E forwards the call to back to user B. Network option: hop counter supported N<5 Test purpose: Ensure that when user A calls user B, the call is forwarded to user C, C to D. User D forwards the call to back to user B. User D forwards the call to back to user B. Ensure that the call is released. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments:
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.4.2.5 CFNR
|
PSP_XXSSCFNR01 PSTN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4 and 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFNR/ Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR. Served user communication retention on invocation of diversion (forwarding or deflection) = No. Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 477 PSP_XXSSCFNR02 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFNR/ Configuration: The user A and the user C are in network N1. The user B is provided with CFNR , Served user communication retention on invocation of diversion (forwarding or deflection) = Yes Selection criteria: CFNR supported CF Notifications supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C The diverting user accepts the communication after sending the INVITE request, the communication path towards the diverted to user shall be released according to the rules and procedures in IETF RFC 3261 [28]. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSP_XXSSCFNR 03 PSTN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2 and 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR. Served user communication retention on invocation of diversion (forwarding or deflection) = No [Clear call to the served user on invocation of call diversion], Served user communication retention when forwarding is rejected at forwarded-to user = No action at the forwarding user. Selection criteria: Call forwarding by the network Call forwarding unconditional supported user C is user determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is busy. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 478 PSP_XXSSCFNR 04 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR Served user communication retention on invocation of diversion (forwarding or deflection) = Yes. Selection criteria: Call forwarding by the network Call forwarding unconditional supported user C is user determined user busy Test purpose: User A calls user B, the call is forwarded to user C who is network determined user busy. The forwarding user User B continues to alert. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSP_XXSSCFNR 05 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR Served user communication retention on invocation of diversion (forwarding or deflection) = Yes. Selection criteria: Call forwarding by the network Call forwarding unconditional supported user C is user determined user busy Test purpose: User A calls user B, the call is forwarded to user C who is user determined user busy. The forwarding user User B continues to alert. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 479 PSPP_XXSSCFNR 06 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN-PSTN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR. User D forwards the call to back to user B. Selection criteria: Call forwarding by the network CFNR supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSS_XXSSCFNR 07 PSTN reference to: ETSI EN 300 207-1 [i.5] clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is provided with CFNR. Served user communication retention on invocation of diversion (forwarding or deflection) = No Selection criteria: Call forwarding by the network CFNR supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 480 PSS_XXSSCFNR 08 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is provided with CFNR. Served user communication retention on invocation of diversion (forwarding or deflection) = Yes Selection criteria: Call forwarding by the network CFNR supported Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C The diverting user accepts the communication after sending the INVITE request, the communication path towards the diverted to user shall be released according to the rules and procedures in IETF RFC 3261 [28]. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSS_XXSSCFNR 09 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is provided with CFNR Selection criteria: User B has activated the CALL DEFLECTION service CFNR supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 481 PSS_XXSSCFNR 10 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR Served user communication retention on invocation of diversion (forwarding or deflection) = No [Clear call to the served user on invocation of call diversion], Served user communication retention when forwarding is rejected at forwarded-to user = No action at the forwarding user ). Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSS_XXSSCFNR 11 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR Served user communication retention on invocation of diversion (forwarding or deflection) = No [Clear call to the served user on invocation of call diversion], Served user communication retention when forwarding is rejected at forwarded-to user = No action at the forwarding user). Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 482 PSS_XXSSCFNR 12 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR. Served user communication retention on invocation of diversion (forwarding or deflection) = Yes. Selection criteria: Call forwarding by the network CFNR supported Test purpose: User A calls user B, the call is forwarded to user C who is user determined user busy. The forwarding user User B continues to alert. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: PSS_XXSSCFNR 13 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. Served user communication retention on invocation of diversion (forwarding or deflection) = Yes. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: User A calls user B, the call is forwarded to user C who is network determined user busy. The forwarding user User B continues to alert. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 483 PSPP_XXSSCFNR 14 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN-PSTN/Supplementary_services/CFNR Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR. User D forwards the call to back to user B. Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C and D. User D forwards the call to back to user B. Ensure that the call is released. PSTN Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments:
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.4.2.6 CFNL
|
PSP_XXSSCFNL 01 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFNL Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNL Selection criteria: Call forwarding by the network CFNL supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. PSTN Parameter values: SIP Parameter values: Comments: PSP_XXSSCFNL 02 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFNL Configuration: The user B is in network N2 and is provided with CFNL Selection criteria: Call forwarding by the network CFNL supported user C is user determined user busy Test purpose: To verify that a call is released correctly if CFNL was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. PSTN Parameter values: SIP Parameter values: Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 484 PSP_XXSSCFNL 03 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-PSTN/Supplementary_services/CFNL Configuration: The user B is in network N2 and is provided with CFNL Selection criteria: Call forwarding by the network CFNL supported user C is network determined user busy Test purpose: To verify that a call is released correctly if CFNL was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. User A is notified of call diversion and user C is informed of the forwarding number (user B has presentation allowed). PSTN Parameter values: SIP Parameter values: Comments PSS_XXSSCFNL 04 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFNL Configuration: The user B is provided with CFNL Selection criteria: Call forwarding by the network CFNL supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. PSTN Parameter values: SIP Parameter values: a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition Comments: PSS_XXSSCFNL 05 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFNL Configuration: The user B is in network N2 and is provided with CFNL Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: To verify that a call is released correctly if CFNL was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. PSTN Parameter values: SIP Parameter values: a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 485 PSS_XXSSCFNL 06 PSTN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2, 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: PSTN-SIP-SIP/Supplementary_services/CFNL Configuration: The user B is in network N2 and is provided with CFNL Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: To verify that a call is released correctly if CFNL was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. PSTN Parameter values: SIP Parameter values: a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition Comments:
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.5 Test purposes for SIP-PSTN
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.5.1 Test purposes for SIP-PSTN, Basic call
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.5.1.1 Test purposes for SIP-PSTN, Basic call, Successful
|
SP_AU_01 PSTN reference to: ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3 TSS reference: SIP-PSTN /Basic_call/Successful/3,1 kHz audio Selection criteria: Test purpose: Ensure that call establishment and the mapping of the parameters defined in table 9 between INVITE message and the PSTN is performed correctly. Ensure that in the confirmed state the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 486 SP_AU_02 PSTN reference to: ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3 TSS reference: SIP-PSTN/Basic_call/Successful/3,1 kHz audio Selection criteria: FAX G3 Test purpose: Ensure that call establishment and the mapping of the defined parameters between INVITE message and PSTN is performed correctly Ensure that in the active call state (N10) the voice transfer on the media and B-channels is performed correctly (e.g. testing QoS parameters). SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line Based on T.38. b = line AS: 64 m = line: udptl; T38 Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. SP_AU_03 PSTN reference to: ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 TSS reference: SIP-PSTN/Basic_call/Successful/3,1 kHz audio Selection criteria: Test purpose: Ensure that the call establishment and the call clearing procedure are performed correctly when the calling user clears after answering with a BYE message. Ensure that in the confirmed state the transfer of tone or announcement on the media channel is performed correctly. In case when the parameter in the SDP rtpmap:<dynamic-PT> is used the codecs in table 10 applies. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 487 SP_AU_04 PSTN reference to: ETSI EN 300 899-1 [23], clause 3.1.1 NGN reference to: ITU-T Q.1912.5 [51], clause 6.11 TSS reference: SIP-PSTN/Basic_call/Successful/3,1 kHz audio Selection criteria: Test purpose: Ensure that the call clearing procedure is performed correctly when the called user clears after answering The calling user shall receive a BYE message. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. Table 9: Values for test purposes SP_AU_01 to SP_AU_04 m= line b= line a= line VA <media> <transport> <fmt-list> <modifier>: <bandwidth-value> (see note) rtpmap: <payload type> <encoding name>/ <clock rate> [/<encoding parameters>] VA_01 audio RTP/AVP 0 N/A or up to 64 kbit/s N/A VA_02 audio RTP/AVP Dynamic PT N/A or up to 64 kbit/s rtpmap:<dynamic-PT> PCMU/8000 VA_03 audio RTP/AVP 8 N/A or up to 64 kbit/s N/A VA_04 audio RTP/AVP Dynamic PT N/A or up to 64 kbit/s rtpmap:<dynamic-PT> PCMA/8000 VA_05 image Udptl t38 N/A or up to 64 kbit/s Based on T.38 VA_06 image Tcptl t38 N/A or up to 64 kbit/s Based on T.38 NOTE: <bandwidth value> for <modifier> of AS is evaluated to be B kbit/s. Table 10: Values for test purposes SP_AU_01 and SP_AU_04 VARIABLE PT Encoding media type clock rate channels VA_01 0 PCMU A 8,000 1 VA_02 3 GSM A 8,000 1 VA_03 4 G723 A 8,000 1 VA_04 5 DVI4 A 8,000 1 VA_05 7 LPC A 8,000 1 VA_06 8 PCMA A 8,000 1 VA_07 9 G722 A 8,000 1 VA_08 12 QCELP A 8,000 1 VA_09 13 CN A 8,000 1 VA_10 18 G729 A 8,000 1 VA_11 Dyn G726-40 A 8,000 1 VA_12 Dyn G726-32 A 8,000 1 VA_13 Dyn G726-24 A 8,000 1 VA_14 Dyn G726-16 A 8,000 1 VA_15 Dyn G729D A 8,000 1 VA_16 Dyn G729E A 8,000 1 VA_17 Dyn GSM-EFR A 8,000 1 ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 488
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.5.1.2 Test purposes for SIP-PSTN, Basic call, Unsuccessful
|
Unsuccessful SP_XX_U01 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: SIP-PSTN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that, when calling to unallocated number, the network initiate call clearing to the calling user with a 404Not Found message. If the Reason Header field is implemented the cause value #1 should be set in the Reason Header field. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. SP_XX_U02 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: SIP-PSTN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that the call will be released when there is no route to destination. The network initiates call clearing to the calling user with a 503 Service unavailable message. If the Reason Header field is implemented the cause value # 3 should be set in the Reason Header field. SIP Parameter values: a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 489 SP_XX_U03 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: SIP-PSTN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that, when the called user is busy the network initiates call clearing to the calling user with a 486 Busy Here message. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. SP_XX_U04 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: SIP-PSTN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that when there is no answer from the called user (but user alerted), the network initiate call clearing to the calling user with a CANCEL or 408 Request Timeout message. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. SP_XX_U05 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: SIP-PSTN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that the call will be released when the called number is incomplete. The network initiates call clearing to the calling user with final response code in SIP_MESSAGE_VA. The cause value should be mapped to the Reason Header field. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 490 Test case variable for test case SP_XX_U05 SIP_MESSAGE_VA Unsuccessful destination (Address incomplete) VA_1 404 Not Found "Unassigned (unallocated) number" VA_2 503 Service unavailable "No route to destination" VA_3 410 Gone "Number changed" VA_4 484 Address Incomplete "Invalid number format (incomplete number") SP_XX_U06 NGN reference to: ITU-T Q.1912.5 [51] TSS reference: SIP-PSTN/Basic_call/Unsuccessful Selection criteria: Test purpose: Ensure that the call will be released when the calling user clears the call with a CANCEL or BYE before answer from called user. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: In the Request-URI a sip: URI with the user=phone parameter, and the user info part of that URI is an E.164 number encoded as specified by the telephone-subscriber rule of IETF RFC 3966 [26]. Table 11: Values for test purposes SP_XX_U01 to SP_XX_U06 m= line b= line a= line VA <media> <transport> <fmt-list> <modifier>: <bandwidth-value> (see note) rtpmap: <payload type> <encoding name>/ <clock rate> [/<encoding parameters>] VA_01 audio RTP/AVP 0 N/A or up to 64 kbit/s N/A VA_02 audio RTP/AVP Dynamic PT N/A or up to 64 kbit/s rtpmap:<dynamic-PT> PCMU/8000 VA_03 audio RTP/AVP 8 N/A or up to 64 kbit/s N/A VA_04 audio RTP/AVP Dynamic PT N/A or up to 64 kbit/s rtpmap:<dynamic-PT> PCMA/8000 VA_05 image Udptl t38 N/A or up to 64 kbit/s Based on T.38 VA_06 image Tcptl t38 N/A or up to 64 kbit/s Based on T.38 NOTE: <bandwidth value> for <modifier> of AS is evaluated to be B kbit/s. Table 12: Values for test purposes SP_XX_U01 to SP_XX_U06 VARIABLE PT Encoding media type clock rate channels VA_01 0 PCMU A 8 000 1 VA_02 3 GSM A 8 000 1 VA_03 4 G723 A 8 000 1 VA_04 5 DVI4 A 8 000 1 VA_05 7 LPC A 8 000 1 VA_06 8 PCMA A 8 000 1 VA_07 9 G722 A 8 000 1 VA_08 12 QCELP A 8 000 1 VA_09 13 CN A 8 000 1 VA_10 18 G729 A 8 000 1 VA_11 Dyn G726-40 A 8 000 1 VA_12 Dyn G726-32 A 8 000 1 VA_13 Dyn G726-24 A 8 000 1 VA_14 Dyn G726-16 A 8 000 1 VA_15 Dyn G729D A 8 000 1 VA_16 Dyn G729E A 8 000 1 VA_17 Dyn GSM-EFR A 8 000 1 ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 491
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.5.2 Test purposes for SIP - PSTN Supplementary services
| |
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.5.2.1 OIP/CLIP
|
SP_XXSSOIP01 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received the priv-value component is set to "none" the SIP From header field containing a URI with an identity in the format of a tel URI has not been received the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 492 SP_XXSSOIP02 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No priv value is sent Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • no priv value is received • the SIP From header field containing a URI with an identity in the format of a tel URI has been received • the Calling Party Number mapped from the From Header is correctly delivered to the called (served) SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 493 SP_XXSSOIP03 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No priv value is sent No special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • no priv value is received • the SIP From header field containing a URI with an identity in the format of a tel URI has been received • the Calling Party Number mapped from the P-Asserted ID is correctly delivered to the called (served) user. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 494 SP_XXSSOIP04 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No priv value is sent Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • no priv value is received • the SIP From header field containing a URI with an identity in the format of a tel URI has not been received • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 495 SP_XXSSOIP05 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the priv-value component is set to "none" • the Calling Party Number mapped from the From Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 496 SP_XXSSOIP06 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the priv-value component is set to "none" • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 497 SP_XXSSOIP07 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • no priv value is received • the Calling Party Number mapped from the From Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 498 SP_XXSSOIP08 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • no priv value is received • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 499 SP_XXSSOIP09 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number mapped from the From Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 500 SP_XXSSOIP10 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 501 SP_XXSSOIP11 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • No priv value is received • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number mapped from the From Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 502 SP_XXSSOIP12 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • no priv value is received • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number mapped from the content of the P-Asserted Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 503 SP_XXSSOIP 13 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) not in the format of a tel URI has not been received • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 504 SP_XXSSOIP14 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received: • no priv value is received • the SIP From header field containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 505 SP_XXSSOIP15 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number mapped from the From Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 506 SP_XXSSOIP16 PSTN reference to: ETSI EN 300 001 [i.12] ETSI TS 300 648 [i.13] ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 507 SP_XXSSOIP17 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a URI (PIXIT) in the format of a tel URI has been received • no priv value is received • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received the Calling Party Number mapped from the From Header is correctly delivered to the called (served) user. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 508 SP_XXSSOIP17 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a URI (PIXIT) in the format of a tel URI has been received • no priv value is received • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received and • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 509 SP_XXSSOIP18 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the priv-value component is set to "none" • the Calling Party Number mapped from the From Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 510 SP_XXSSOIP19 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the priv-value component is set to "none" • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 511 SP_XXSSOIP20 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • no priv value is received • the Calling Party mapped from the set to the content of the From Header Number is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 512 SP_XXSSOIP21 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • no priv value is received • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 513 SP_XXSSOIP22 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header is set to anonymous • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 514 SP_XXSSOIP23 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • no priv value is received • the SIP From header is set to anonymous • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 515 SP_XXSSOIP24 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) not in the format of a tel URI has been received • the Calling Party Number set to the content of the From Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 516 SP_XXSSOIP25 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) not in the format of a tel URI has been received • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 517 SP_XXSSOIP26 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) not in the format of a tel URI has not been received • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 518 SP_XXSSOIP27 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the priv-value component is set to "none" • the Calling Party Number mapped from the From Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 519 SP_XXSSOIP28 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the priv-value component is set to "none" • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 520 SP_XXSSOIP29 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received and • the Calling Party Number mapped to the From Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 521 SP_XXSSOIP30 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received and • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 522 SP_XXSSOIP31 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) not in the format of a tel URI has not been received • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 523 SP_XXSSOIP32 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received: • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received: • the Calling Party Number mapped from the From Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 524 SP_XXSSOIP33 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" No Special arrangement applies Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 525 SP_XXSSOIP34 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header is set to anonymous • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE SP_XXSSOIP35 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header is set to anonymous • the Calling Party Number set to the content of the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 526 SP_XXSSOIP36 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "not restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • No priv value is received • the SIP From header is set to anonymous • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 527 SP_XXSSOIP37 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header is set to anonymous • the Calling Party Number mapped from the P-Asserted-Identity Header is correctly delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.5.2.2 OIR/CLIR
|
SP_XXSSOIR01 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • the priv-value component is set to "id" • the SIP From header field containing a SIP URI (PIXIT) has been received • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 528 SP_XXSSOIR02 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • the priv-value not present • the SIP From header field containing a SIP URI (PIXIT) has been received • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE SP_XXSSOIR03 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • priv-value component is set to "id" • the SIP From header is set to anonymous • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 529 SP_XXSSOIR04 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "temporary mode" default "restricted" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • priv-value component is not present • the SIP From header is set to anonymous • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition SIP URI PIXIT: Case a) sip: local-number-digits; phone-context=nat @hostportion; user=phone Case b) sip: global -number-digits @hostportion; user=phone Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 530 SP_XXSSOIR05 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR temporary mode" default "not restricted Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • the priv-value component is set to "id" • the SIP From header field containing a SIP URI (PIXIT) has been received • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE SP_XXSSOIR06 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR temporary mode" default "not restricted Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • priv-value component is set to "id" • the SIP From header is set to anonymous • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 531 SP_XXSSOIR07 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR permanent mode Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • the priv-value component is set to "id" • the SIP From header field containing a SIP URI (PIXIT) has been received • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE SP_XXSSOIR08 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR permanent mode Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • the priv-value component is not present • the SIP From header field containing a SIP URI (PIXIT) has been received • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 532 SI_XXSSOIR09 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR permanent mode Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • priv-value component is set to "id" • the SIP From header is set to anonymous • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE SP_XXSSOIR10 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR permanent mode Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) has been received • priv-value component is not present • the SIP From header is set to anonymous • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 533 SP_XXSSOIR11 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: SIP URI or SIPS URI is used in the P-Preferred-Identity The user subscribes OIR "permanent mode" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) not in the format of a tel URI has been received • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 534 SP_XXSSOIR12 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "permanent mode" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) with an identity in the format of a tel URI has not been received the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) not in the format of a tel URI has not been received • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE SP_XXSSOIR13 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "permanent mode" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the priv-value component is set to "none" • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 535 SP_XXSSOIR14 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "permanent mode" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header field containing a SIP URI (PIXIT) with an identity in the format of a tel URI has been received • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE SP_XXSSOIR15 PSTN reference to: ETSI EN 300 001 [i.12], ETSI TS 300 648 [i.13], ETSI EN 300 659 [i.15] NGN reference to: ITU-T Q.1912.5 [51], clause 6.1.3.6 ETSI EN 383 001 [49], clause 6.1.3.6 ETSI TS 129 163 [i.20], clause 7.2.3.1.2.6 TSS reference: Private Extensions to SIP for Asserted Identity within Trusted Networks Selection criteria: The user subscribes OIR "permanent mode" Test purpose: Ensure that the SUT in the Idle state, on receipt of a INVITE message where: • the SIP P-Preferred-Identity containing a SIP URI (PIXIT) in the format of a tel URI has been received • the priv-value component is set to "none" • the SIP From header is set to anonymous • the Calling Party Number is not delivered to the called (served) user SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SIP SUT PSTN INVITE Ringing 180 Ringing Off Hook 200 OK INVITE ACK BYE On hook 200 OK BYE ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 536
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.5.2.3 CFU
|
SPS_XXSSCFU 01 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-SIP/Supplementary_services/CFU Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SPS_XXSSCFU 02 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-SIP/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported User C is user determined user busy Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SPS_XXSSCFU 03 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-SIP/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported User C is network determined user busy Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 537 SPP_XXSSCFU 04 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-PSTN/Supplementary_services/CFU Configuration: The user B is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SPP_XXSSCFU 05 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-PSTN/Supplementary_services/CFU Configuration: The user B is in network N2 and is provided with CFU Selection criteria: Call forwarding by the network Call forwarding unconditional supported Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments:
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.5.2.4 CFB
|
SPS_XXSSCFB01 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-SIP/Supplementary_services/CFB Configuration: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFB- (network determined). Selection criteria: Call forwarding by the network Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. SIP Parameter values: SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 538 SPS_XXSSCFB 02 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-SIP/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with CFB Selection criteria: Call forwarding by the network CFB supported User C is user determined user busy Test purpose: To verify that a call is released correctly if CFU was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SPS_XXSSCFB 03 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-SIP/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with CFB Selection criteria: Call forwarding by the network CFB supported User C is network determined user busy Test purpose: To verify that a call is released correctly if CFB was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SPP_XXSSCFB 04 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-PSTN/Supplementary_services/CFB Configuration: The user B is provided with CFB Selection criteria: Call forwarding by the network Call forwarding busy Test purpose: Ensure that when user A calls user B, the call is forwarded to user C. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 539 SPP_XXSSCFB 05 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-PSTN/Supplementary_services/CFB Configuration: The user B is in network N2 and is provided with CFB Selection criteria: Call forwarding by the network CFB supported User C is network determined user busy Test purpose: To verify that a call is released correctly if CFB was not successful. User A calls user B, the call is forwarded to user C who is busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments:
|
f72e5b464f10bf0050bab19795493770
|
186 001-1
|
6.5.2.5 CFNR
|
SPS_XXSSCFNR01 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-SIP/Supplementary_services/CFNR/ Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR , option B, immediate release, no notification Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SPS_XXSSCFNR02 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-SIP/Supplementary_services/CFNR/ Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR , option A, late release, no notification Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 540 SPS_XXSSCFNR 03 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR Selection criteria: Call forwarding by the network CFNR option B, immediate release, no notification User C is user determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SPS_XXSSCFNR 04 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR Selection criteria: Call forwarding by the network CFNR supported option B, immediate release, no notification User C is network determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SPS_XXSSCFNR 05 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR Selection criteria: Call forwarding by the network CFNR option A late release, no notification User C is user determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is user determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 541 SPS_XXSSCFNR 06 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-SIP/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR Selection criteria: Call forwarding by the network CFNR supported option A, late release, no notification User C is network determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is network determined user busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SPP_XXSSCFNR 07 PSTN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4 and 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-PSTN/Supplementary_services/CFNR/ Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR , option B, immediate release, no notification Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SPP_XXSSCFNR 08 PSTN reference to: ETSI EN 300 403-1 [i.3], clauses 9.2.2, 9.2.4.4 and 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-PSTN/Supplementary_services/CFNR/ Selection criteria: The user A and the user C are in network N1. The user B is in network N2 and is provided with CFNR , option A, late release, no notification Test purpose: Ensure that when user A calls user B, if unanswered, the call is forwarded to user C. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 542 SPP_XXSSCFNR 09 PSTN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2 and 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-PSTN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR Selection criteria: Call forwarding by the network CFNR option B, immediate release, no notification User C is user determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is busy. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: SPP_XXSSCFNR 10 PSTN reference to: ETSI EN 300 207-1 [i.5], clauses 6.1, 9.2.2 and 9.2.5 NGN reference to: ETSI TS 124 604 [45] TSS reference: SIP-PSTN-PSTN/Supplementary_services/CFNR Configuration: The user B is in network N2 and is provided with CFNR Selection criteria: Call forwarding by the network CFNR option A, late release, no notification User C is user determined user busy Test purpose: To verify that a call is released correctly if CFNR was not successful. User A calls user B, the call is forwarded to user C who is busy. User B continues to alert to the forwarding user. SIP Parameter values: Dial string parameters options=PIXIT PIXIT for supported header: Case a) no 100 rel Case b) Supported: 100 rel Case c) Supported: 100 rel and precondition a = line (PIXIT) b = line (PIXIT) m = line (PIXIT) Comments: ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 543 Annex A (informative): Bibliography ETSI TS 103 189: "Core Network and Interoperability Testing (INT); Assessment of end-to-end Quality for VoLTE and RCS". ETSI TS 129 163: "Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Interworking between the IP Multimedia (IM) Core Network (CN) subsystem and Circuit Switched (CS) networks (3GPP ETSI TS 29.163 Release 10)". ETSI ETSI TS 186 001-1 V3.1.1 (2015-11) 544 History Document history V1.0.0 May 2008 Publication V2.2.1 July 2010 Publication V3.1.1 November 2015 Publication
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
1 Scope
|
The present document defines a protocol applicable to the a4 interface between the User Access Authorization Function (UAAF) and the Connectivity session Location and repository Function (CLF), based on the Diameter protocol. Whenever it is possible the present document specifies the requirements for this protocol by reference to specifications produced by the IETF within the scope of Diameter. Where this is not possible, extensions to Diameter are defined within the present document.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
2 References
|
References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • Non-specific reference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
2.1 Normative references
|
The following referenced documents are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. [1] ETSI ES 282 004: "Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); NGN Functional Architecture; Network Attachment Sub-System (NASS)". [2] ETSI TS 129 229: "Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Cx and Dx interfaces based on the Diameter protocol; Protocol details (3GPP TS 29.229)". [3] ETSI TS 129 329: "Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Sh interface based on the Diameter protocol; Protocol details (3GPP TS 29.329)". [4] ETSI ES 283 034: " Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Network Attachment Sub-System (NASS); e4 interface based on the DIAMETER protocol". [5] ETSI TS 183 020: " Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN); Network Attachment: Roaming in TISPAN NGN Network Accesses; Interface Protocol Definition". [6] IETF RFC 2960: "Stream Control Transmission Protocol". [7] IETF RFC 3309: "Stream Control Transmission Protocol (SCTP) Checksum Change". ETSI ETSI TS 183 066 V2.1.1 (2009-01) 7 [8] IETF RFC 3554: "On the Use of Stream Control Transmission Protocol (SCTP) with IPSec". [9] IETF RFC 3588: "Diameter Base Protocol". [10] ETSI TS 183 059-1: "Telecommunications and Internet Converged Services and Protocols for Advanced Networks (TISPAN); Network Attachment Sub-System (NASS); a2 interface based on the DIAMETER protocol".
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
2.2 Informative references
|
The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. Not applicable.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
3 Definitions and abbreviations
| |
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
3.1 Definitions
|
For the purposes of the present document, the following terms and definitions apply: Attribute-Value Pair (AVP): corresponds to an Information Element in a Diameter message NOTE: See definition in RFC 3588 [9]. NASS User: See definition in ES 282 004 [1].
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
3.2 Abbreviations
|
For the purposes of the present document, the following abbreviations apply: ABNF Augmented Backus-Naur Form AVP Attribute-Value Pair CLF Connectivity session Location and repository Function CNGCF Customer Network Gateway Configuration Function DHCP Dynamic Host Configuration Protocol IANA Internet Assigned Numbers Authority IETF Internet Engineering Task Force IP Internet Protocol IPSec IP Security NAS Network Access Server NASS Network Attachment Sub-System P-CSCF Proxy Call Session Control Function PDBF Profile Data Base Function PNA Push-Notification-Answer PNR Push-Notification-Request PPP Point-to-Point Protocol RACS Resource and Admission Control Subsystem RFC Request For Comments SCTP Stream Control Transport Protocol UAAF User Access Authorization Function UDA User-Data-Answer UDR User-Data-Request ETSI ETSI TS 183 066 V2.1.1 (2009-01) 8
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
4 Overview
|
The Network Attachment Sub-System (NASS), defined in ES 282 004 [1], maintains information about IPconnectivity associated with NASS User connected to TISPAN networks. The document specifies the protocol for the NASS a4 interface between the User Access Authorization Function (UAAF) and the Connectivity session Location and repository Function (CLF), based on the Diameter protocol. Figure 4.1: a4 interface The a4 interface allows the CLF to register the association between the NASS User identity and the NASS User preferences regarding the privacy of location information provided by the UAAF. The a4 interface is also used to register NASS User network profile information (QoS profile). The CLF may retrieve the NASS User network profile from the UAAF. The UAAF - CLF relationship may be operated in pull mode or push mode. The push mode is used when the UAAF is involved in the processing of network access requests in order to authorize or deny access to the network (e.g. when explicit authentication is used). The pull mode is used when implicit authentication is used or in support of CLF recovery procedures. The following information flows are used on the a4 interface: • Access Profile Push. • Access Profile Pull. • Remove Access Profile.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5 Procedure descriptions
| |
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.1 General
| |
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.1.1 Information elements
|
The following clauses describe the realization of the functional procedures defined in the NASS (ES 282 004 [1]) using Diameter commands described in clause 7. This involves describing a mapping between the Information Elements defined in the NASS specification (ES 282 004 [1]) and Diameter AVPs. Admission applications UE TE CNG ARF AMF CNGCF NACF UAAF PDBF CLF Service control subsystems and Resource Control Subsystem e3 e1 e1 a1 a3 a2 a4 e4 e2 e2 e2 e5 Scope of the present document ETSI ETSI TS 183 066 V2.1.1 (2009-01) 9 In the tables that describe this mapping, each Information Element is marked as (M) Mandatory, (C) Conditional or (O) Optional: • A mandatory Information Element (marked as (M) in the table) shall always be present in the command. If this Information Element is absent, an application error occurs at the receiver and an answer message shall be sent back to the originator of the request with the Result-Code set to DIAMETER_MISSING_AVP. This message shall also include a Failed-AVP AVP containing the missing Information Element i.e. the corresponding Diameter AVP defined by the AVP Code and the other fields set as expected for this Information Element. • A conditional Information Element (marked as (C) in the table) shall be present in the command if certain conditions are fulfilled: - If the receiver detects that those conditions are fulfilled and the Information Element is absent, an application error occurs and an answer message shall be sent back to the originator of the request with the Result-Code set to DIAMETER_MISSING_AVP. This message shall also include a Failed-AVP AVP containing the missing Information Element i.e. the corresponding Diameter AVP defined by the AVP Code and the other fields set as expected for this Information Element. If multiple Information Elements are missing, all corresponding AVP codes shall be included in the Failed-AVP AVP. - If those conditions are not fulfilled, the Information Element shall be absent. If however this Information Element appears in the message, it shall not cause an application error and it may be ignored by the receiver if this is not explicitly defined as an error case. Otherwise, an application error occurs at the receiver and an answer message with the Result-Code set to DIAMETER_AVP_NOT_ALLOWED shall be sent back to the originator of the request. A Failed-AVP AVP containing a copy of the corresponding Diameter AVP shall be included in this message. • An optional Information Element (marked as (O) in the table) may be present or absent in the command, at the discretion of the application at the sending entity. Absence or presence of this Information Element shall not cause an application error and may be ignored by the receiver.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.1.2 NASS User profile
|
NASS User profile information sent over the a4 interface comprises QoS profile information and initial gate setting information. Each of these pieces of information may be sent in the form of an identifier using the QoS-Profile-ID and Initial-Gate-Setting-ID AVPs or in the form of an explicit description using the QoS-Profile-Description and Initial-Gate-Setting-Description AVPs. Tables 5.1 and 5.2 detail the information elements involved in the second case as defined in the NASS specification ES 282 004 [1] and their mapping to DIAMETER AVPs. Table 5.1: Initial gate setting description Information element name Mapping to Diameter AVP Cat. Description List of allowed destinations as well as multicast flows NAS-Filter-Rule O In case of unicast data, the list of default destination IP addresses, ports, prefixes and port ranges to which traffic can be sent. In case of multicast, the list of IP-Multicast group addresses and/or the list of (Source IP address, IP-Multicast group address) pairs which traffic can be received from by the attached NASS User. List of denied destinations as well as multicast flows NAS-Filter-Rule O In case of unicast, the list of default destination IP addresses, ports, prefixes and port ranges to which traffic is denied. In case of multicast, the list of IP-Multicast group addresses and/or the list of (Source IP address, IP-Multicast group address) pairs for which traffic towards the attached NASS User must be denied. UL Subscribed Bandwidth Maximum-Allowed- Bandwidth-UL O The maximum amount of bandwidth that can be used without explicit authorization in the uplink direction. DL Subscribed Bandwidth Maximum-Allowed- Bandwidth-DL O The maximum amount of bandwidth that can be used without explicit authorization in the downlink direction. ETSI ETSI TS 183 066 V2.1.1 (2009-01) 10 Table 5.2: QoS profile description Information element name Mapping to Diameter AVP Cat. Description Transport service class Transport-Class O The transport class applicable to the QoS Profile Information. Media-Type Media-Type O The media type applicable to the QoS Profile information. UL Subscribed Bandwidth Maximum-Allowed- Bandwidth-UL O The maximum amount of bandwidth subscribed by the attached NASS User in the uplink direction. DL Subscribed Bandwidth Maximum-Allowed- Bandwidth-DL O The maximum amount of bandwidth subscribed by the attached NASS User in the downlink direction. Maximum Priority Reservation-Priority O The maximum priority allowed for any reservation request. Requestor Name Application Class ID O Identifies the application class(es) that are allowed to request resources for the QoS profile.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2 Procedures on the a4 interface
| |
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2.1 Access profile push
| |
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2.1.1 Overview
|
This procedure is used to push the Access Profile information from the UAAF to the CLF. This information flow occurs when a NASS User has been successful authenticated or in case a modification occurs on a profile that has already been pushed to the CLF. UAAF may decide to send in the same Access Profile Push some profiles in the form of a profile id (because the actual profile information is assumed to be available in the CLF) and some other profiles in the form of full profile descriptions. This information is retrieved from the PDBF by the UAAF. This procedure is mapped to the commands Push-Notification-Request/Answer in the Diameter application specified in clause 7. Tables 5.3 and 5.4 detail the involved information elements as defined in the NASS specification ES 282 004 [1] and their mapping to Diameter AVPs. ETSI ETSI TS 183 066 V2.1.1 (2009-01) 11 Table 5.3: Access Profile Push Information element name Mapping to Diameter AVP Cat. Description Globally Unique IP Address Globally-Unique-Address O This information element contains: • The IP address of the NASS User for which profile information is being pushed. • The addressing domain in which the IP address is significant. Logical Access ID Logical-Access-Id M The identity of the logical access to which the user equipment is connected. NASS User ID User-Name O The NASS User that is attached to the network (see note). Physical Access ID Physical-Access-Id O The identity of the physical access to which the user equipment is connected. CNGCF address CNGCF-Address O The address of the CNGCF entity from which configuration data may be retrieved by the user equipment. P-CSCF Identity (optional) SIP-Outbound-Proxy O The Identity of the P-CSCF for accessing IMS services. Initial Gate Setting Initial-Gate-Setting or Initial-Gate-Setting-ID O See clause 5.1, table 1. QoS Profile QoS-Profile or QoS- Profile-ID O See clause 5.1, table 2. Privacy Indicator Privacy-Indicator O Whether location information can be exported to services and applications. Data Operation Indication Data-Operation-Indicator O Whether the Access Profile of the NASS User shall be updated or removed. See clause 7.3.1 for the Default value. NOTE: Ths NASS User ID shall be included if available in the UAAF. Table 5.4: Access Profile Push response Information element name Mapping to Diameter AVP Cat. Description Result Result-Code / Experimental_ Result M Result of the request. Result-Code AVP shall be used for errors defined in the Diameter Base Protocol. Experimental-Result AVP shall be used for other errors. This is a grouped AVP which contains a Vendor-Id AVP, and the error code in the Experimental-Result-Code AVP.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2.1.2 Procedure at the UAAF side
|
The UAAF knows the address of the CLF entity where the information should be pushed, either from configuration data or from the NASS User profile (i.e. received from the PDBF). The UAAF shall populate the Access Profile Push as follows: • The Logical-Access-ID AVP shall be present. • In case PPP is applied, the Globally-Unique-Address AVP shall be present. In case DHCP is applied, this AVP is optional. The Globally-Unique-Address AVP shall contain a Frame-IP-Address or Frame-IPv6-Prefix AVP value, and an Address-Realm AVP. • If available in the UAAF, the User-Name AVP shall be present. • In case PPP is applied, the Physical-Access-Id AVP may be present. The presence of the other AVPs depends on the NASS User profile and local policy rules.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2.1.3 Procedure at the CLF side
|
If the Logical-Access-ID AVP is not present or is invalid, the CLF shall return an Access Profile Push response with a Result-Code AVP value set to DIAMETER_INVALID_AVP_VALUE. ETSI ETSI TS 183 066 V2.1.1 (2009-01) 12 If the Logical Access ID contained in the Logical-Access-ID AVP is not known, the CLF shall: • Create an internal record to store the received information for future use (e.g. push the Access Profile to the RACS). If the Logical Access ID contained in the Logical-Access-ID AVP is already known, the CLF shall: • Replace the entire content of the internal record with the received information for future use (e.g. push the Access Profile to the RACS). • Push the updated Access Profile to RACS if appropriate. If the contents of the request are invalid the CLF shall return an Access Profile Push response with a Result-Code AVP value set to the appropriate value. If the CLF cannot fulfil the received request for reasons not stated in the above steps, e.g. due to database error, it shall stop processing the request and return an Access Profile Push response with a Result-Code AVP value set to DIAMETER_UNABLE_TO_COMPLY or an Experimental-Result-Code AVP set to DIAMETER_SYSTEM_UNAVAILABLE. In the later case, the UAAF is expected to retry after a provisioned time period. Otherwise, the requested operation shall take place and the CLF shall return the Result-Code AVP set to DIAMETER_SUCCESS in the Access Profile Push response.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2.2 Access profile pull
| |
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2.2.1 Overview
|
The Access Profile Pull information flow is used by the CLF to request the Access Profile information from the UAAF. This information flow is used when the CLF - UAAF operates in pull mode or in the context of CLF recovery procedures. This procedure is mapped to the commands User-Data-Request/Answer in the Diameter application specified in clause 7. Tables 5 and 6 detail the involved information elements as defined in the NASS specification ES 282 004 [1] and their mapping to Diameter AVPs. Table 5.5: Access Profile Pull request Information element name Mapping to Diameter AVP Cat. Description Globally unique IP Address Globally-Unique- Address C This information element contains: • The IP address of the NASS User for which profile information is being pushed. • The addressing domain in which the IP address is significant. NASS User ID User-Name C The NASS User that is attached to the network. Logical Access ID Logical-Access-Id C The identity of the logical access to which the user equipment is connected. NOTE: At least one of the above elements should be included. ETSI ETSI TS 183 066 V2.1.1 (2009-01) 13 Table 5.6: Access Profile Pull response Information element name Mapping to Diameter AVP Cat. Description Globally Unique IP Address Globally-Unique-Address O This information element contains: • The IP address of the NASS User for which profile information is being pushed. • The addressing domain in which the IP address is significant. Logical Access ID Logical-Access-Id M The identity of the logical access to which the user equipment is connected. NASS User ID User-Name O The NASS User that is attached to the network (see note). Physical Access ID Physical-Access-Id O The identity of the physical access to which the user equipment is connected. CNGCF address CNGCF-Address O The address of the CNGCF entity from which configuration data may be retrieved by the user equipment. P-CSCF Identity (optional) SIP-Outbound-Proxy O The Identity of the P-CSCF for accessing IMS services. Initial Gate Setting Initial-Gate-Setting or Initial-Gate-Setting-ID O See clause 5.1, table 1. QoS Profile QoS-Profile or QoS- Profile-ID O See clause 5.1, table 2. Privacy Indicator Privacy-Indicator O Whether location information can be exported to services and applications. NOTE: The NASS User ID shall be included if available in the UAAF.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2.2.2 Procedure at the CLF side
|
The CLF shall populate the Access Profile Pull Request as follows: 1) The User-Name AVP or the Globally-Unique-Address AVP or the Logical-Access-ID AVP shall be included. The Globally-Unique-Address AVP shall be included in configurations where more than one IP address may be assigned per NASS User ID. 2) If present, the Globally-Unique-Address AVP shall contain a Frame-IP-Address or Frame-IPv6-Prefix AVP value, and an Address-Realm AVP.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2.2.3 Procedure at the UAAF side
|
Upon reception of the Access Profile Pull Request, the UAAF shall, in the following order: 1) If the Logical-Access-ID AVP is present, use this information as a key to retrieve the requested Access Profile. 2) If the Logical-Access-ID AVP is absent but the Globally-Unique-Address AVP is present, use the latter information as a key to retrieve the requested Access Profile. 3) If both the Logical-Access-ID AVP and the Globally-Unique-Address AVP are absent but the User-Name AVP is present, use the latter information as a key to retrieve the requested Access Profile. 4) If all the Logical-Access-ID AVP, the Globally-Unique-Address AVP and the User-Name AVP are absent, return an Access Pull Profile response with Result-Code set to DIAMETER_MISSING_AVP. 5) If more than one record include the same NASS User ID matching the value of the User-Name AVP and neither Globally-Unique-Address AVP nor Logical-Access-ID AVP is included, return an Access Pull Profile response with Result-Code set to DIAMETER_UNABLE_TO_COMPLY. 6) If no Access Profile record is stored for the Globally-Unique-Address AVP or the Logical-Access-ID AVP or the User-Name AVP, return an Access Pull Profile with the Experimental-Result-Code AVP set to DIAMETER_ERROR_USER_UNKNOWN. ETSI ETSI TS 183 066 V2.1.1 (2009-01) 14 If a unique NASS User record can be retrieved, the UAAF shall: 7) Check whether the session data to be retrieved is currently being updated by another entity. If there is an update of the data in progress, the UAAF may delay the response message until the update has been completed and shall include in the response message the updated data requested. The UAAF shall ensure that the data returned is not corrupted by this conflict. If the UAAF cannot fulfil the received request for reasons not stated in the above steps, e.g. due to database error, it shall stop processing the request and set Result-Code to DIAMETER_UNABLE_TO_COMPLY or an Experimental-Result-Code AVP set to DIAMETER_USER_DATA_NOT_AVAILABLE. Otherwise, the requested operation shall take place and the UAAF shall return the Result-Code AVP set to DIAMETER_SUCCESS and the session data in the Access Profile Pull response.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2.3 Remove Access Profile
| |
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2.3.1 Overview
|
The Remove Access Profile information flow is used by the UAAF to request the CLF to delete the information it held about a NASS User. This event occurs as a result of network management actions. This procedure is mapped to the commands Push-Notification-Request/Answer in the Diameter application specified in clause 7. Tables 7 and 8 detail the involved information elements as defined in the NASS specification ES 282 004 [1] and their mapping to Diameter AVPs. Table 5.7: Remove Access Profile Indication Information element name Mapping to Diameter AVP Cat. Description Globally unique IP Address Globally-Unique- Address O This information element contains: • The IP address of the NASS User for which profile information is being pushed. • The addressing domain in which the IP address is significant. NASS User ID User-Name O The identity of the NASS User that is attached to the network. Logical Access ID Logical-Access-Id M The identity of the logical access to which the user equipment is connected. Data Operation Indication Data-Operation- Indicator M Whether the Access Profile of the NASS User shall be updated or removed. Table 5.8: Remove Access Profile Response Information element name Mapping to Diameter AVP Cat. Description Result Result-Code / Experimental_ Result M Result of the request. Result-Code AVP shall be used for errors defined in the Diameter Base Protocol. Experimental-Result AVP shall be used for other errors. This is a grouped AVP which contains a Vendor-Id AVP, and the error code in the Experimental-Result-Code AVP.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2.3.2 Procedure at the UAAF side
|
The UAAF shall populate the Remove Access Profile Indication as follows: • The Logical-Access-ID AVP shall be present. • In case PPP is applied, the Globally-Unique-Address AVP shall be present. In case DHCP is applied, this AVP is optional. The Globally-Unique-Address AVP shall contain a Frame-IP-Address or Frame-IPv6-Prefix AVP value, and an Address-Realm AVP. • If available in the UAAF, the User-Name AVP shall be present. ETSI ETSI TS 183 066 V2.1.1 (2009-01) 15 • The Data-Operation-Indicator AVP shall be present, and the value of this AVP shall be set to REMOVE.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
5.2.3.3 Procedure at the CLF side
|
If the Logical Access ID contained in the Logical-Access-ID AVP is not known, the CLF shall stop processing the request and set the Experimental-Result-Code to DIAMETER_ERROR_USER_UNKNOWN in the Remove Access Profile Response. If the Logical Access ID contained in the Logical-Access-ID AVP is already known, the CLF shall: • remove the existing session record; • notify the RACS. If the CLF cannot fulfil the received request for reasons not stated in the above steps, e.g. due to database error, it shall stop processing the request and set Result-Code to DIAMETER_UNABLE_TO_COMPLY or an Experimental-Result-Code set to DIAMETER_SYSTEM_UNAVAILABLE. In the later case, the UAAF is expected to retry after a provisioned time period. Otherwise, the requested operation shall take place and the CLF shall return a Remove Access Profile Response message with the Result-Code AVP set to DIAMETER_SUCCESS.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
6 Use of the Diameter base protocol
|
With the clarifications listed in the following clauses the Diameter Base Protocol defined by RFC 3588 [9] shall apply.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
6.1 Securing Diameter Messages
|
For secure transport of Diameter messages, IPSec may be used. Guidelines on the use of SCTP with IPSec can be found in RFC 3554 [8].
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
6.2 Accounting functionality
|
Accounting functionality (Accounting Session State Machine, related command codes and AVPs) is not used on the a4 interface.
|
8417e56860be9e8305a0eeb862fa5f87
|
183 066
|
6.3 Use of sessions
|
Diameter sessions are implicitly terminated. An implicitly terminated session is one for which the server does not maintain state information. The client does not need to send any re-authorization or session termination requests to the server. The Diameter base protocol includes the Auth-Session-State AVP as the mechanism for the implementation of implicitly terminated sessions. The client (server) shall include in its requests (responses) the Auth-Session-State AVP set to the value NO_STATE_MAINTAINED (1), as described in RFC 3588 [9]. As a consequence, the server does not maintain any state information about this session and the client does not need to send any session termination request. Neither the Authorization-Lifetime AVP nor the Session-Timeout AVP shall be present in requests or responses.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.