id
stringlengths 9
16
| submitter
stringlengths 1
64
⌀ | authors
stringlengths 3
62.8k
| title
stringlengths 1
382
| comments
stringlengths 1
1.15k
⌀ | journal-ref
stringlengths 1
557
⌀ | doi
stringlengths 7
153
⌀ | report-no
stringlengths 1
509
⌀ | categories
stringlengths 5
125
| license
stringclasses 9
values | abstract
stringlengths 3
6.09k
| versions
listlengths 1
187
| update_date
timestamp[s]date 2007-05-23 00:00:00
2025-08-22 00:00:00
| authors_parsed
listlengths 1
3.31k
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
physics/0008098
|
Paul Corredoura
|
P. Corredoura, C. Adolphsen
|
RF Control System for the NLC Linacs
|
3 pages, presented at the 20th International Linac Conference,
Monterey California, August 21-25, 2000
|
eConf C000821 (2000) TUc18
| null |
SLAC Pub #8571
|
physics.acc-ph physics.ins-det
| null |
The proposed Next Linear Collider contains a large number of linac RF systems
with new requirements for wideband klystron modulation and accurate RF vector
detection. The system will be capable of automatically phasing each klystron
and compensating for beam loading effects. Accelerator structure alignment is
determined by detection of the beam induced dipole modes with a receiver
similar to that used for measuring the accelerator RF and is incorporated into
the RF system topology. This paper describes the proposed system design, signal
processing techniques and includes preliminary test results.
|
[
{
"version": "v1",
"created": "Wed, 16 Aug 2000 23:30:30 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Corredoura",
"P.",
""
],
[
"Adolphsen",
"C.",
""
]
] |
physics/0008099
|
Scott D. Nelson
|
Scott D. Nelson, Michael Vella
|
RF Cell Modeling and Experiments for Wakefield Minimization in DARHT-II
|
LINAC2000 TUB09
|
eConf C000821 (2000) TUB09
| null | null |
physics.acc-ph
| null |
Electron beams of linear induction accelerators experience deflective forces
caused by RF fields building up as a result of accelerating cavities of finite
size. These forces can significantly effect the beam when a long linac composed
of identical cells is assembled. Recent techniques in computational modeling,
simulation, and experiments for 20 MeV DARHT-II (Dual Axis Radiographic
Hydrodynamic Test) accelerator cells were found to reduce the wakefield
impedance of the cells from 800 ohms/meter to 350 ohms/meter and experimental
results confirm the results of the modeling efforts. Increased performance of
the cell was obtained through a parametric study of the accelerator structure,
materials, material tuning, and geometry. As a result of this effort, it was
found that thickness-tuned ferrite produced a 50% deduction in the wakefield
impedance in the low frequency band and was easily tunable based on the
material thickness. It was also found that shaped metal sections allow for
high-Q resonances to be de-tuned, thus decreasing the amplitude of the
resonance and increasing the cell s performance. For the geometries used for
this cell, a roughly 45 degree angle had the best performance in affecting the
wakefield modes.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 01:18:19 GMT"
},
{
"version": "v2",
"created": "Mon, 21 Aug 2000 18:07:28 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Nelson",
"Scott D.",
""
],
[
"Vella",
"Michael",
""
]
] |
physics/0008100
|
Viatcheslav M. Pavlov
|
VEPP-5 Team (Budker INP, Novosibirsk, Russia)
|
Test of accelerating structure for VEPP-5 preinjector
|
3 pages, 5 figures, Linac2000, [3] S.N. Dolya, W.I.Furman, V.V.
Kobets, E.M. Lasiev, Yu.A. Metelkin, V.A. Shvets, A.P. Soumbaev, the VEPP-5
Team, "Linac LUE200. First testing results" (submitted to this conference)
|
eConf C000821 (2000) TUA21
| null | null |
physics.acc-ph
| null |
Preinjector VEPP-5 electron linac consists of two linear accelerators on
energy 300 MeV and 510 MeV and includes 14 accelerating structures [1]. First
accelerating structures both linacs have increased average rate of acceleration
25-30 MeV/m, and other regular sections up to 17-20 MeV/m. This paper presents
the results of basic test of 3-meter long accelerating structure. Average rate
of acceleration of an electron beam 35 MeV/m was achieved. The electron beam
energy up to 105 MeV was obtained.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 06:08:40 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"5 Team",
"",
""
]
] |
physics/0008102
|
Richard Scrivens
|
C.E. Hill (1), A. Lombardi (1), R. Scrivens (1), M. Vretenar (1), A.
Feschenko (2), A. Liou (2) ((1) CERN, Geneva, Switzerland, (2)INR, Moscow,
Russia.)
|
Tests of the CERN Proton Linac Performance for LHC-Type Beams
|
LINAC 2000, TUC14, 3 pages, 5 figures
|
eConf C000821 (2000) TUD17
| null | null |
physics.acc-ph
| null |
As the pre-injector of the LHC injector chain, the proton linac at CERN is
required to provide a high-intensity (180mA) beam to the Proton Synchrotron
Booster. The results of measurements at this intensity will be presented.
Furthermore, the linac is now equipped with bunch shape monitors from INR,
Moscow, which have allowed the comparison of the Alvarez tank RF settings with
simulations.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 09:26:20 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Hill",
"C. E.",
""
],
[
"Lombardi",
"A.",
""
],
[
"Scrivens",
"R.",
""
],
[
"Vretenar",
"M.",
""
],
[
"Feschenko",
"A.",
""
],
[
"Liou",
"A.",
""
]
] |
physics/0008103
|
Peter Forck
|
P. Forck, F. Heymach, T. Hoffmann, A. Peters, P. Strehl
|
Measurement of the six Dimensional Phase Space at the New GSI High
Current Linac
|
LINAC contribution, poster MOC09
|
eConf C000821 (2000) MOc09
| null | null |
physics.acc-ph
| null |
For the characterization of the 10 mA ion beam delivered by the new High
Current Linac at GSI, sophisticated, mainly non-intersepting diagnostic devices
were developed. Besides the general set-up of a versatile test bench, we
discuss in particular bunch shape and emittance measurements. A direct
time-of-flight technique with a diamond particle detector is used to observe
the micro-bunch distribution with a resolution of $\sim 25 $ ps equals
0.3$^{o}$ in phase. For the determination of the energy spread a coincidence
technique is applied, using secondary electrons emitted by the ion passing
through an aluminum foil 80 cm upstream of the diamond detector. The transverse
emittance is measured within one macro pulse with a pepper-pot system equipped
with a high performance CCD camera.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 09:29:38 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Forck",
"P.",
""
],
[
"Heymach",
"F.",
""
],
[
"Hoffmann",
"T.",
""
],
[
"Peters",
"A.",
""
],
[
"Strehl",
"P.",
""
]
] |
physics/0008104
|
Matthias Liepe
|
N. Baboi, M. Ferrario, M. Liepe, J. Sekutowicz
|
Superconducting Superstructure for the TESLA Collider: New Results
|
for LINAC 2000, 3 pages, 5 figures
|
eConf C000821 (2000) TUA15
| null | null |
physics.acc-ph
| null |
A new cavity-chain layout has been proposed for the main linac of the TESLA
linear collider. This superstructure-layout is based upon four 7-cell
superconducting standing-wave cavities, coupled by short beam pipes. The main
advantages of the superstructure are an increase in the active accelerating
length in TESLA and a saving in rf components, especially power couplers, as
compared to the present 9-cell cavities. The proposed scheme allows to handle
the field-flatness tuning and the HOM damping at sub-unit level, in contrast to
standard multi-cell cavities. The superstructure-layout is extensively studied
at DESY since 1999. Computations have been performed for the rf properties of
the cavity-chain, the bunch-to-bunch energy spread and multibunch dynamics. A
copper model of the superstructure has been built in order to compare with the
simulations and for testing the field-profile tuning and the HOM damping
scheme. A "proof of principle" niobium prototype of the superstructure is now
under construction and will be tested with beam at the TESLA Test Facility in
2001. In this paper we present latest results of these investigations.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 11:43:46 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Baboi",
"N.",
""
],
[
"Ferrario",
"M.",
""
],
[
"Liepe",
"M.",
""
],
[
"Sekutowicz",
"J.",
""
]
] |
physics/0008105
|
Andreas Sauer
|
A. Sauer, H. Deitinghoff, H. Klein (Institut fuer Angewandte Physik
(IAP) Universitaet Frankfurt am Main)
|
Beam Dynamics Studies for a High Current Ion Injector
|
paper for LINAC 2000, id number THB06, beam dynamics simulations,
high current and high intensity beams, matching to RFQ and DTL, emittance
growth, IFMIF
|
eConf C000821 (2000) THB06
| null | null |
physics.acc-ph
| null |
Recent ion source developments resulted in the generation of high brilliance,
high current beams of protons and light ions. After extraction and transport
the beams with large internal space charge forces have to be captured, bunched
and preaccelerated for the injection into the following driver part of a new
generation of high intensity beam facilities for neutron sources, energy
production, transmutation e.g. A combination of RFQ and DTL is considered to be
a good solution for such a high current ion injector. Some preliminary beam
dynamics layouts have been investigated by multiparticle simulations. Basic
parameters like frequency, ion energy and sparking have been varied for the
International Fusion Material Irradiation Facility (IFMIF) scenario as an
example. The main interest was directed to high transmission, low losses and
emittance conservation. The beam matching to the RFQ is shortly discussed as
well as the matching between RFQ and DTL.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 11:55:21 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Sauer",
"A.",
"",
"Institut fuer Angewandte Physik"
],
[
"Deitinghoff",
"H.",
"",
"Institut fuer Angewandte Physik"
],
[
"Klein",
"H.",
"",
"Institut fuer Angewandte Physik"
]
] |
physics/0008106
| null |
M. Pabst, K. Bongardt (Forschungszentrum Juelich GmbH, Germany), A.
Letchford (RAL, Didcot, U.K.)
|
High Current Beam Dynamics in an Ess SC Linac
|
LINAC2000 conference contribution, 3 pages, 4 figures
|
eConf C000821 (2000) THB03
| null | null |
physics.acc-ph
| null |
Three alternative designs of the European Spallation Source (ESS) high energy
linac are described. The most promising ones are either a normalconducting (nc)
coupled cavity linac (CCL) up tofinal energy or a change at 407 MeV to only one
group of 6 cell superconducting (sc) elliptical cavities.
Fully 3d Monte Carlo simulations are presented for both options, optimized
for reduced halo formation at the linac end. For the error free matched case,
especially the halo formation in the longitudinal plane is more pronounced for
the hybrid solution with its superconducting cavities, caused by the
unavoidable phase slippage, but still quite well acceptable for loss free ring
injection. Simulations however for a 30% mismatched dense core, surrounded in
addition by 1.5% halo particles are showing few particles with very large
amplitudes even in real space. This case represents halo formation in front to
end simulations, caused by current fluctuations, filamented RFQ output
distribution and enhanced by accumulated field errors.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 13:18:54 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Pabst",
"M.",
"",
"Forschungszentrum Juelich GmbH, Germany"
],
[
"Bongardt",
"K.",
"",
"Forschungszentrum Juelich GmbH, Germany"
],
[
"Letchford",
"A.",
"",
"RAL, Didcot, U.K."
]
] |
physics/0008107
|
Joseph F. Tooker
|
G. Spalek, D.W. Christiansen, P.D.Smith, P.T. Greninger, and C.M.
Charman
|
Studies of Coupled Cavity Linac (CCL) Accelerating Structures with 3-D
Codes
|
THD18, XX INternational Linac Conference, 3 pages, APT, CCL, 3D
|
eConf C000821 (2000) THD18
| null | null |
physics.acc-ph
| null |
The cw CCL being designed for the Accelerator Production of Tritium (APT)
project accelerates protons from 96MeV to 211MeV. It consists of 99 segments
each containing up to seven accelerating cavities. Segments are coupled by
intersegment coupling cavities and grouped into supermodules. The design method
needs to address not only basic cavity sizing for a given coupling and pi/2
mode frequency, but also the effects of high power densities on the cavity
frequency, mechanical stresses, and the structure's stop band during operation.
On the APT project, 3-D RF (Ansoft Corp.'s HFSS) and coupled RF/structural
(Ansys Inc.'s ANSYS) codes are being used to develop tools to address the above
issues and guide cooling channel design. The code's predictions are being
checked against available low power Aluminum models. Stop band behavior under
power will be checked once the tools are extended to CCDTL structures that have
been tested at high power. A summary of calculations made to date and agreement
with measured results will be presented.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 13:57:19 GMT"
},
{
"version": "v2",
"created": "Thu, 17 Aug 2000 23:46:55 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Spalek",
"G.",
""
],
[
"Christiansen",
"D. W.",
""
],
[
"Smith",
"P. D.",
""
],
[
"Greninger",
"P. T.",
""
],
[
"Charman",
"C. M.",
""
]
] |
physics/0008109
|
Anatoly Krasnykh
|
Anatoly Krasnykh
|
Analyses of klystron modulator approaches for NLC
|
3 pages, 6 figures, THA15, to be submitted at XX International Linac
Conference, LINAC2000, Monterey, CA
|
eConf C000821 (2000) THA15
| null |
SLAC-PUB-8564
|
physics.acc-ph
| null |
Analyze of experimental results shows that the energy discharge efficiency of
the modern modulators is 0.92-0.93. The energy transfer efficiency can be
reached up to 0.7 for 1.5 usec pulse width and up to 0.8 for 3.0 usec
accordingly. The geometry and core material of the transformer is one element
of modulator, which limits the efficiency due to limitation if transmission
band of the pulse power. Ways of the rise of energy transfer efficiency had
been discussed. The use of features of coupled transmission lines lies in the
base of an idea how the energy transfer efficiency can be improved up to 0.85
in the frame of the conventional approach. In the second part of the paper the
transformerless modulator approaches are presented upon a modified Marx method
of voltage multiplication using on/off IGBT instead of on switches.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 15:10:44 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Krasnykh",
"Anatoly",
""
]
] |
physics/0008110
|
Winfried Barth
|
J. Glatz, J. Klabunde, U. Scheeler, D. Wilms
|
Operational Aspects of the High Current Upgrade at the Unilac
|
Linac 2000, MOD12, 3 pages, 5 figures
|
eConf C000821 (2000) MOD12
| null | null |
physics.acc-ph
| null |
With the new GSI High Current Injector, the beam pulse intensity will be
increased by more than two orders of magnitude. The high beam power and the
short stopping range at particle energies below 12 MeV/u can destroy
accelerator components even during a single beam pulse. Therefore, the
operation of the whole accelerator facility has required major changes in
hardware, software and operating strategy. A sophisticated beam diagnostic
system is indispensable for a safe operation. Preferably non-destructive
devices were installed. Destructive elements, e.g. beam stoppers, slits,
apertures, were improved in order to withstand the high beam power. Automatic
damage prevention was realised by beam loss monitors comparing and evaluating
very fast beam current transformer signals. Additionally, the component status
will be controlled permanently. For foil stripping at 11.4 MeV/u, a magnetic
beam sweeping system was installed Thereby, the hit area will be increased
during one 100 micro sec pulse. During operation, manual variation of
parameters has to be reduced. Set-up and automatic beam adjustment procedures
have to exclude uncontrolled beam loss. The versatility of the UNILAC is
enhanced by the possible three-beam operation on a pulse-to-pulse basis. Since
November 1999 the upgraded UNILAC is serving the experiments.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 15:20:28 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Glatz",
"J.",
""
],
[
"Klabunde",
"J.",
""
],
[
"Scheeler",
"U.",
""
],
[
"Wilms",
"D.",
""
]
] |
physics/0008111
|
Dario Villani
|
Dario Villani and Andrei E. Ruckestein
|
Looking Forward to Pricing Options from Binomial Trees
|
12 pages, 1 figure
| null | null | null |
physics.gen-ph cond-mat
| null |
We reconsider the valuation of barrier options by means of binomial trees
from a "forward looking" prospective rather than the more conventional
"backward induction" one used by standard approaches. This reformulation allows
us to write closed-form expressions for the value of European and American put
barrier-options on a non-dividend-paying stock.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 16:16:38 GMT"
},
{
"version": "v2",
"created": "Mon, 21 Aug 2000 18:36:39 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Villani",
"Dario",
""
],
[
"Ruckestein",
"Andrei E.",
""
]
] |
physics/0008113
|
Amy H. Regan
|
Amy Regan, Sung-il Kwon, Tony S. Rohlev, Yi-Ming Wang, Mark S. Prokop,
David W. Thomson
|
Design of the SNS Normal Conducting Linac RF Control System
|
TUC17
|
eConf C000821 (2000) TUc17
| null | null |
physics.acc-ph
| null |
The Spallation Neutron Source (SNS) is being designed for operation in 2004.
The SNS is a 1 GeV machine consisting of a combination normal-conducting and
super-conducting linac as well as a ring and target area. The linac front end
is a 402.5 MHz RFQ being developed by Lawrence Berkeley Lab. The DTL (at 402.5
MHz) and the CCL (at 805 MHz) stages are being developed by Los Alamos National
Laboratory. The expected output energy of the DTL is 87 MeV and that of the CCL
is 185 MeV. The RF control system under development for the linac is based on
the Low Energy Demonstration Accelerator (LEDA) control system with some new
features. This paper will discuss the new design approach and its benefits.
Block diagrams and circuit specifics will be addressed. The normal conducting
RF control system will be described in detail with references to the
super-conducting control system where appropriate.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 15:53:13 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Regan",
"Amy",
""
],
[
"Kwon",
"Sung-il",
""
],
[
"Rohlev",
"Tony S.",
""
],
[
"Wang",
"Yi-Ming",
""
],
[
"Prokop",
"Mark S.",
""
],
[
"Thomson",
"David W.",
""
]
] |
physics/0008114
|
Michael Borland
|
Michael Borland, John Lewellen, Steve Milton (ANL)
|
A Highly Flexible Bunch Compressor for the APS LEUTL FEL
|
LINAC2000 THC05 3 pages 1 figure
|
eConf C000821 (2000) THc05
| null | null |
physics.acc-ph
| null |
The LEUTL FEL at the APS has achieved gain at 530 nm with peak beam current
\~100 A. In an effort to push to 120 nm and beyond, we have designed and are
commissioning a bunch compressor to increase the peak current to 600 A or more.
The bunch compressor uses a four-dipole chicane at an energy of 100 to 210 MeV.
To provide options for control of emittance growth due to coherent synchrotron
radiation (CSR), the chicane has variable R56. The central pair of dipoles is
movable, accommodating variable R56 with less concern about emittance dilution
from nonuniformity of the dipole field. The symmetry of the chicane is also
variable via longitudinal motion of the final dipole, which is predicted to
have an effect on emittance growth. Following the chicane, a three-screen
emittance measurement system should permit resolution of the difference in
emittance growth between various chicane configurations. A vertical bending
magnet analysis line is present to permit imaging of correlations between
transverse and energy coordinates. This paper reviews the features and expected
performance of the chicane. A companion paper discusses the physics design in
detail.
Work supported by the U.S. Department of Energy, Office of Basic Energy
Sciences, under Contract No. W-31-109-ENG-38.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 15:55:38 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Borland",
"Michael",
"",
"ANL"
],
[
"Lewellen",
"John",
"",
"ANL"
],
[
"Milton",
"Steve",
"",
"ANL"
]
] |
physics/0008115
|
Feschenko
|
A.V.Feschenko, V.A.Moiseev
|
Space Charge Effects in Bunch Shape Monitors
|
Report for the Linac2000 conf., MOC13, 3 pages, 8 figures
|
eConf C000821 (2000) MOc13
| null | null |
physics.acc-ph
| null |
The operation and parameters of Bunch Shape Monitors using coherent
transformation of time structure of an analyzed beam into a spatial one of low
energy secondary electrons emitted from a wire target is influenced by the
characteristics of a beam under study. The electromagnetic field of a bunch
disturbs the trajectories of secondary electrons, thus resulting in a
degradation of phase resolution and in errors of phase reading. Another effect
is the perturbation of the target potential due to the current in the wire
induced by a bunch as well as due to current compensating emission of the
secondary electrons. The methods, the models and the results of simulations are
presented.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 16:02:46 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Feschenko",
"A. V.",
""
],
[
"Moiseev",
"V. A.",
""
]
] |
physics/0008116
|
Michael Borland
|
Nicholas Sereno, Michael Borland, Alex Lumpkin (ANL)
|
Use of Coherent Transition Radiation to Set Up the APS RF Thermionic Gun
to Produce High-Brightness Beams for SASE FEL Experiments
|
LINAC2000 MOB17 3 pages 8 figures
|
eConf C000821 (2000) MOB17
| null | null |
physics.acc-ph
| null |
We describe use of the Advanced Photon Source (APS) rf thermionic gun, alpha
magnet beamline, and linac to produce a stable high-brightness beam in excess
of 100 amperes peak current with normalized emittance of 10 pi mm-mrad. To
obtain peak currents greater than 100 amperes, the rf gun system must be tuned
to produce a FWHM bunch length on the order of 350 fs. Bunch lengths this short
are measured using coherent transition radiation (CTR) produced when the rf gun
beam, accelerated to 40 MeV, strikes a metal foil. The CTR is detected using a
Golay detector attached to one arm of a Michelson interferometer. The alpha
magnet current and gun rf phase are adjusted so as to maximize the CTR signal
at the Golay detector, which corresponds to the minimum bunch length. The
interferometer is used to measure the autocorrelation of the CTR radiation. The
minimum phase approximation is used to derive the bunch profile from the
autocorrelation. The high-brightness beam is accelerated to 217 MeV and used to
produce SASE in five APS undulators installed in the Low- Energy Undulator Test
Line (LEUTL) experiment hall. Initial optical measurements showed a gain length
of 1.3 m at 530 nm. * Work supported by U. S. Department of Energy, Office of
Basic Energy Sciences, under Contract No. W-31-109-ENG-38.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 16:03:52 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Sereno",
"Nicholas",
"",
"ANL"
],
[
"Borland",
"Michael",
"",
"ANL"
],
[
"Lumpkin",
"Alex",
"",
"ANL"
]
] |
physics/0008118
|
Yu-Jiuan Chen
|
Yu-Jiuan Chen and Arthur C. Paul
|
Physics Design Considerations of Diagnostic X Beam Transport System
|
3 pages, 0 figures, LINAC 2000, TBU20
|
eConf C000821 (2000) TUB20
| null | null |
physics.acc-ph
| null |
Diagnostic X (D-X) transport system would extract the beam from the
downstream transport line of the second- axis of the Dual Axis Radiographic
Hydrodynamic Test facility (DARHT-II) and transport this beam to the D-X firing
point via four branches of the beamline in order to provide four lines of sight
for x-ray radiography. The design goal is to generate four DARHT-II-like x-ray
pulses on each line of sight. In this paper, we discuss several potential beam
quality degradation processes in the passive magnet lattice beamline and
indicate how they constrain the D-X beamline design parameters, such as the
background pressure, the pipe size, and the pipe material
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 17:36:17 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Chen",
"Yu-Jiuan",
""
],
[
"Paul",
"Arthur C.",
""
]
] |
physics/0008119
|
Yu-Jiuan Chen
|
Yu-Jiuan Chen, Darwin D.-M. Ho, James F. Mccarrick, Arthur C. Paul,
Stephen Sampayan, Li-Fang Wang, John T. Weir
|
Physics Design of the ETA-II/Snowtron Double Pulse Target Experiment
|
3 pages, 4 figures, LINAC 2000, TBU19
|
eConf C000821 (2000) TUB19
| null | null |
physics.acc-ph
| null |
We have modified the single pulse target experimental facility[ ] on the
Experimental Test Accelerator II (ETA-II) to perform the double pulse target
experiments to validate the DARHT-II[, ] multi-pulse target concept. The 1.15
MeV, 2 kA Snowtron injector will provide the first electron pulse. The 6 MeV, 2
kA ETA-II beam will be used as the probe beam. Our modeling indicates that the
ETA-II/Snowtron experiment is a reasonable scaling experiment.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 17:44:59 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Chen",
"Yu-Jiuan",
""
],
[
"Ho",
"Darwin D. -M.",
""
],
[
"Mccarrick",
"James F.",
""
],
[
"Paul",
"Arthur C.",
""
],
[
"Sampayan",
"Stephen",
""
],
[
"Wang",
"Li-Fang",
""
],
[
"Weir",
"John T.",
""
]
] |
physics/0008120
|
Michael G. Mazarakis
|
M. G. Mazarakis, R. B. Spielman, K. W. Struve, F. W. Long
|
A New Linear Inductive Voltage Adder Driver for the Saturn Accelerator
|
3 pages, 4 figures. This paper is submitted for the 20th Linear
Accelerator Conference LINAC2000, Monterey, CA
|
eConf C000821 (2000) TUc05
| null | null |
physics.acc-ph
| null |
Saturn is a dual-purpose accelerator. It can be operated as a large-area
flash x-ray source for simulation testing or as a Z-pinch driver especially for
K-line x-ray production. In the first mode, the accelerator is fitted with
three concentric-ring 2-MV electron diodes, while in the Z-pinch mode the
current of all the modules is combined via a post-hole convolute arrangement
and driven through a cylindrical array of very fine wires. We present here a
point design for a new Saturn class driver based on a number of linear
inductive voltage adders connected in parallel. A technology recently
implemented at the Institute of High Current Electronics in Tomsk (Russia) is
being utilized[1].
In the present design we eliminate Marx generators and pulse-forming
networks. Each inductive voltage adder cavity is directly fed by a number of
fast 100-kV small-size capacitors arranged in a circular array around each
accelerating gap. The number of capacitors connected in parallel to each cavity
defines the total maximum current. By selecting low inductance switches,
voltage pulses as short as 30-50-ns FWHM can be directly achieved.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 18:04:23 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Mazarakis",
"M. G.",
""
],
[
"Spielman",
"R. B.",
""
],
[
"Struve",
"K. W.",
""
],
[
"Long",
"F. W.",
""
]
] |
physics/0008122
|
Terry L. Smith
|
T.L. Smith, M.H. Cho, A.E. Grelick, G. Pile, A. Nassiri, N. Arnold
|
RF System Upgrades to the Advanced Photon Source Linear Accelerator in
Support of the Fel Operation
|
LC 2000 (3 pages, 6 figures)
|
eConf C000821 (2000) THc10
| null | null |
physics.acc-ph
| null |
The S-band linear accelerator, which was built to be the source of particles
and the front end of the Advanced Photon Source injector, is now also being
used to support a low-energy undulator test line (LEUTL) and to drive a
free-electron laser (FEL). The more severe rf stability requirements of the FEL
have resulted in an effort to identify sources of phase and amplitude
instability and implement corresponding upgrades to the rf generation chain and
the measurement system. Test data and improvements implemented and planned are
described
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 18:46:56 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Smith",
"T. L.",
""
],
[
"Cho",
"M. H.",
""
],
[
"Grelick",
"A. E.",
""
],
[
"Pile",
"G.",
""
],
[
"Nassiri",
"A.",
""
],
[
"Arnold",
"N.",
""
]
] |
physics/0008125
|
William A. Reass
|
William A. Reass, James D. Doss, Robert F. Gribble, Michael T. Lynch,
and Paul J. Tallerico
|
Progress on the 140 KV, 10 Megawatt Peak, 1 Megawatt Average Polyphase
Quasi-Resonant Bridge, Boost Converter/Modulator for the Spallation Neutron
Source (SNS) Klystron Power System
|
THE11
|
eConf C000821 (2000) THE11
| null |
LAUR 00 3748
|
physics.acc-ph
| null |
This paper describes electrical design and operational characteristics of a
zero-voltage-switching 20 kHz polyphase bridge, boost converter/modulator for
klystron pulse application. The DC-DC converter derives the buss voltages from
a standard 13.8 kV to 2300 Y substation cast-core transformer. Energy storage
and filtering is provided by self-clearing metallized hazy polypropylene
traction capacitors. Three "H-Bridge" IGBT switching networks are used to
generate the polyphase 20 kHz transformers primary drive waveforms. The 20 kHz
drive waveforms are chirped the appropriate duration to generate the desired
klystron pulse width. PWM (pulse width modulation) of the individual 20 kHz
pulses is utilized to provide regulated output waveforms with adaptive
feedforward and feedback techniques. The boost transformer design utilizes
amorphous nanocrystalline material that provides the required low core loss at
design flux levels and switching frequencies. Resonant shunt peaking is used on
the transformer secondary to boost output voltage and resonate transformer
leakage inductance. With the appropriate transformer leakage inductance and
peaking capacitance, zero-voltage-switching of the IGBT's is attained,
minimizing switching losses. A review of these design parameters and a
comparison of computer calculations, scale model, and first article results
will be performed.
|
[
{
"version": "v1",
"created": "Thu, 17 Aug 2000 21:30:43 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Reass",
"William A.",
""
],
[
"Doss",
"James D.",
""
],
[
"Gribble",
"Robert F.",
""
],
[
"Lynch",
"Michael T.",
""
],
[
"Tallerico",
"Paul J.",
""
]
] |
physics/0008128
|
Daniel Schulte
|
D. Schulte
|
Simulation of an Intra-Pulse Interaction Point Feedback for Future
Linear Colliders
|
LINAC2000 Conference, Paper ID MOA02
|
eConf C000821 (2000) MOA02
| null |
CERN/PS 2000-051 (AE)
|
physics.acc-ph
| null |
In future normal-conducting linear colliders, the beams will be delivered in
short bursts with a length of the order of 100 ns. The pulses will be separated
by several ms. In order to maintain high luminosity, feedback is necessary on a
pulse-to-pulse basis. In addition, intra-pulse feedback that can correct beam
positions and angles within one pulse seem technically feasible. The likely
performances of different feedback options are simulated for the NLC (Next
Linear Collider) and CLIC (Compact Linear Collider).
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 07:18:06 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Schulte",
"D.",
""
]
] |
physics/0008130
|
Roberto Corsini
|
R. Corsini, A. Ferrari, J.P. Potier, L. Rinolfi, T. Risselada, P.
Royer (CERN, Switzerland)
|
A Low Charge Demonstration of Electron Pulse Compression for the CLIC RF
Power Source
|
3 pages, 5 figures, submitted to the LINAC 2000 Conference
|
eConf C000821 (2000) MOA05
| null | null |
physics.acc-ph
| null |
The CLIC (Compact Linear Collider) RF power source is based on a new scheme
of electron pulse compression and bunch frequency multiplication using
injection by transverse RF deflectors into an isochronous ring. In this paper,
we describe the modifications needed in the present LEP Pre-Injector (LPI)
complex at CERN in order to perform a low-charge test of the scheme. The design
of the injector (including the new thermionic gun), of the modified linac, of
the matched injection line, and of the isochronous ring lattice, are presented.
The results of preliminary isochronicity measurements made on the present
installation are also discussed.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 07:24:26 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Corsini",
"R.",
"",
"CERN, Switzerland"
],
[
"Ferrari",
"A.",
"",
"CERN, Switzerland"
],
[
"Potier",
"J. P.",
"",
"CERN, Switzerland"
],
[
"Rinolfi",
"L.",
"",
"CERN, Switzerland"
],
[
"Risselada",
"T.",
"",
"CERN, Switzerland"
],
[
"Royer",
"P.",
"",
"CERN, Switzerland"
]
] |
physics/0008132
|
Daniel Schulte
|
D. Schulte, I. Syratchev
|
Beam Loading Compensation in the Main Linac of CLIC
|
LINAC 2000, paper ID MOA04
|
eConf C000821 (2000) MOA04
| null |
CERN/PS 2000-050 (AE)
|
physics.acc-ph
| null |
Compensation of multi-bunch beam loading is of great importance in the main
linac of the Compact Linear Collider (CLIC). The bunch-to-bunch energy
variation has to stay below 1 part in 1000. In CLIC, the RF power is obtained
by decelerating a drive beam which is formed by merging a number of short bunch
trains. A promising scheme for tackling beam loading in the main linac is based
on varying the lengths of the bunch trains in the drive beam. The scheme and
its expected performance are presented.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 07:51:40 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Schulte",
"D.",
""
],
[
"Syratchev",
"I.",
""
]
] |
physics/0008133
|
Takayuki Imai
|
T. Imai (1), K. Nakai (1), H. Hayano (2), J. Urakawa (2), N. Terunuma
(2) ((1) Science University of Tokyo, (2) KEK, Ibaraki, Japan)
|
Double Kicker system in ATF
|
Linac 2000 proceeding MOA16
|
eConf C000821 (2000) MOA16
| null | null |
physics.acc-ph
| null |
A double kicker system which extracts the ultra-low emittance multi-bunch
beam stably from ATF damping ring was developed. The performance of the system
was studied comparing an orbit jitter with single kicker extraction in single
bunch mode. The position jitter reduction was estimated from the analysis of
the extraction orbits. The reduction was confirmed for the double kicker system
within a resolution of BPMs. More precise tuning of the system with a wire
scanner has been tried by changing a beta function at the second kicker to get
more reduction of kick angle jitter. The results of these studies are described
in detail.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 07:52:18 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Imai",
"T.",
"",
"Science University of Tokyo"
],
[
"Nakai",
"K.",
"",
"Science University of Tokyo"
],
[
"Hayano",
"H.",
"",
"KEK, Ibaraki, Japan"
],
[
"Urakawa",
"J.",
"",
"KEK, Ibaraki, Japan"
],
[
"Terunuma",
"N.",
"",
"KEK, Ibaraki, Japan"
]
] |
physics/0008135
|
Gerald Hutter
|
G. Hutter, W. Gutowski, W. Hartmann, G. Kube, M. Pilz, W. Vinzenz
|
The RF-System of the New Gsi High Current Linac Hsithe RF-System of the
New Gsi High Current Linac Hsi
|
Linac Contribution Poster THE05
|
eConf C000821 (2000) THE05
| null | null |
physics.acc-ph
| null |
The RF part of the new high current injector-linac HSI consists of five
cavities with the new operating frequency of 36 MHz instead of 27 MHz of the
removed Wideroe type injector. The calculated power requirements of the
cavities including beam load in three structures were between 110 kW for a
rebuncher and 1.75 MW pulse-power for the two IH-cavities. The beam load is up
to 150 kW for the RFQ and up to 750 kW for the two drift tube tanks. An
additional 36 MHz debuncher in the transfer line to the Synchrotron (SIS) will
need 120 kW pulse power. We decided to fulfil these demands with amplifiers of
only two power classes, namely three amplifiers with 2 MW and six amplifiers
with 200 kW pulse output power. The latter ones are also used as drivers for
the 2 MW stages. The 200 kW amplifiers were specified in detail by GSI and
ordered in the industry. The three 2 MW final amplifiers were designed,
constructed and built by GSI. The paper gives an overview of the complete RF
system and the operating performance of amplitude and phase control with beam
load. It further describes some specialities of the new 2 MW amplifiers like
the simplicity of the anode circuit, a very sophisticated socket for a cathode
driven amplifier with cathode on dc ground, the parasitic mode-suppression,
shielding and filtering of unallowable RF-radiation and operating experience
since October 1999.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 08:48:53 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Hutter",
"G.",
""
],
[
"Gutowski",
"W.",
""
],
[
"Hartmann",
"W.",
""
],
[
"Kube",
"G.",
""
],
[
"Pilz",
"M.",
""
],
[
"Vinzenz",
"W.",
""
]
] |
physics/0008136
|
Winfried Barth
|
W. Barth, P. Forck, J. Glatz, W. Gutowski, G. Hutter, J. Klabunde, R.
Schwedhelm, P. Strehl, W. Vinzenz, D. Wilms, U. Ratzinger
|
Commissioning of Ih-RFQ and Ih-DTL for the Gsi High Current Linac
|
Linac 2000, MOD11, 3 pages, 4 figures
|
eConf C000821 (2000) MOD11
| null | null |
physics.acc-ph
| null |
The new 1.4 MeV/u front end HSI (HochStromInjektor) of the Unilac accelerates
ions with A/q ratios of up to 65 and with beam intensities in emA of up to 0.25
A/q. The maximum beam pulse power is up to 1300 kW. During the stepwise linac
commissioning from April to Septem-ber 1999 the beam behind of each cavity was
analysed within two weeks. A very stable Ar1+ beam out of a vol-ume plasma
source MUCIS was used mainly. The meas-ured norm. 80 % emittance areas around
0.45 pi mm mrad are close to the results from beam simulations. Up to 80 % of
the design intensity at the linac exit were achieved. In February 2000 an U4+
beam from the MEVVA source was accelerated for the first time.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 09:05:16 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Barth",
"W.",
""
],
[
"Forck",
"P.",
""
],
[
"Glatz",
"J.",
""
],
[
"Gutowski",
"W.",
""
],
[
"Hutter",
"G.",
""
],
[
"Klabunde",
"J.",
""
],
[
"Schwedhelm",
"R.",
""
],
[
"Strehl",
"P.",
""
],
[
"Vinzenz",
"W.",
""
],
[
"Wilms",
"D.",
""
],
[
"Ratzinger",
"U.",
""
]
] |
physics/0008137
|
Painchault
|
M Painchault, J Gaiffier, C Chauvin
|
Main steps for the fabrication of IPHI RFQ
|
3 pages, 4 figures
|
eConf C000821 (2000) THD03
| null | null |
physics.acc-ph
| null |
The RFQ of the project IPHI is a 8 meter long, high power, very precise
tolerances (0.01 mm on 1 meter long for example) device to accelerate protons.
This RFQ is similar to the RFQ of the LEDA project. So, we realize a thermal
and mechanical studies followed by different tests for machining and brazing
copper. We describe in this paper those different steps and the way we proceed
to supply the fabrication itself by an independent company.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 09:17:27 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Painchault",
"M",
""
],
[
"Gaiffier",
"J",
""
],
[
"Chauvin",
"C",
""
]
] |
physics/0008139
|
Arup Banerjee
|
Arup Banerjee and Manoj K. Harbola
|
Frequency dependent hyperpolarizabilities of atoms; calculations using
density-functional theory
|
13 pages of text and 7 figures
| null | null | null |
physics.atom-ph
| null |
Using the orbitals generated by the van Leeuwen-Baerends potential, we
calculate frequency dependent response properties of noble gas atoms of He, Ne
and Ar and alkaline earth atoms Be and Mg, with particlar emphasis on their
nonlinear polarizabilities. For this we employ time-dependent Kohn-Sham
formalism with adiabatic local-density aproximation (ALDA) for exchange and
correlation. We show that results thus obtained for frequency dependent
polarizabilities of the inert gas atoms are highly acurate. On the other hand,
polarizabilities of the alkaline earths are not given with the same accuracy.
In light of this, we make an assessment of ALDA for obtaining linear and
nonlinear response properties by employing time-dependent density-functional
theory.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 10:11:17 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Banerjee",
"Arup",
""
],
[
"Harbola",
"Manoj K.",
""
]
] |
physics/0008140
|
Jang-Min Han
|
J.M. Han, et al
|
A 3.0mev Komac/KTF RFQ Linac
|
6 figures inline of text, higher resolution or color version of all
figures seperately listed as jpg files. Linac 2000 Conference Paper ID No.
TUD01
|
eConf C000821 (2000) TUD01
| null | null |
physics.acc-ph
| null |
The Radio-Frequency Quadrupole (RFQ) linac that will accelerate a 20mA proton
beam from 50keV to 3MeV has been designed and is being fabricated as the first
phase, KOMAC Test Facility (KTF), of the Korea Multipurpose Accelerator Complex
(KOMAC) project at the Korea Atomic Energy Research Institute (KAERI). The
physical, engineering designs and fabrication status of the RFQ are described.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 10:56:33 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Han",
"J. M.",
""
]
] |
physics/0008142
|
Maurizio Vretenar
|
M. Vretenar (for the SPL Study Group)
|
A High-Intensity H- Linac at CERN Based on LEP-2 Cavities
|
Linac2000, paper TU206
|
eConf C000821 (2000) TU206
| null |
TU206
|
physics.acc-ph
| null |
In view of a possible evolution of the CERN accelerator complex towards
higher proton intensities, a 2.2 GeV H- linac with 4 MW beam power has been
designed, for use in connection with an accumulator and compressor ring as
proton driver of a muon-based Neutrino Factory. The high-energy part of this
linac can use most of the RF equipment (superconducting cavities and klystrons)
from the LEP collider after its decommissioning at the end of 2000. Recent
results concerning low-beta superconducting cavities are presented, and the
main characteristics of the linac design are described. The complete
linac-based proton driver facility is outlined, and the impact on the linac
design of the requirements specific to a Neutrino Factory is underlined.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 11:50:04 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Vretenar",
"M.",
"",
"for the SPL Study Group"
]
] |
physics/0008143
|
Raphael Gobin
|
R. Gobin, P-Y. Beauvais, O. Delferriere, R. Ferdinand, F. Harrault,
J-M. Lagniel
|
An ECR hydrogen negative ion source at CEA/Saclay: preliminary results
|
3 pages, 3 figures, LINAC 2000 MOD07
|
eConf C000821 (2000) MOD07
| null | null |
physics.acc-ph
| null |
The development of a high intensity negative ion source is part of a
considerably larger activity presently undergoing at CEA Saclay in the field of
high intensity linear accelerators. Preliminary studies toward the construction
of a 2.45 GHz ECR H- ion source have been performed for few months. This new
test bench takes advantage of our experience on the French high intensity
proton source SILHI. In the new source, the high-energy electrons created in
the ECR zone are trapped by a dipole magnetic filter. A rectangular 200 mm long
plasma chamber and an intermediate iron shield are used to minimize the
magnetic field in the extraction region. A second magnetic filter separates
electrons and negative ions in a 10 kV extraction system. To reduce the
electron/H- ratio, the plasma electrode is slightly polarized. The design
allows future evolutions such as cesium injection, higher energy extraction and
plasma diagnostics. The installation of the source is now in progress. The
first helium plasma has been produced for few weeks to verify the electron
separator behavior. The design, computations and the first results of the
source are presented.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 13:00:21 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Gobin",
"R.",
""
],
[
"Beauvais",
"P-Y.",
""
],
[
"Delferriere",
"O.",
""
],
[
"Ferdinand",
"R.",
""
],
[
"Harrault",
"F.",
""
],
[
"Lagniel",
"J-M.",
""
]
] |
physics/0008144
|
Robin Ferdinand
|
R. Duperrier, R. Ferdinand, P. Gros, J-M. Lagniel, N. Pichoff, D.
Uriot, CEA-Saclay, DSM-DAPNIA-SEA
|
Design of the Ess RFQs and Chopping Line
|
3 pages, LINAC 2000, TUD03
|
eConf C000821 (2000) TUD03
| null | null |
physics.acc-ph
| null |
The chopping line is a critical part of the ESS linac in term of technical
realisation of the choppers and preservation of the beam qualities. A new
optimised design of the ESS RFQs and chopping lines is reported. The beam
dynamics has been optimised with H- beam currents up to 100-mA to have safety
margin with respect to the ESS goals. The first RFQ transmits almost 99.7% of
the beam up to 2 MeV. The line with two choppers allows a perfect chopping
between 2 bunches. The second RFQ accelerates the particles up to 5 MeV with a
transmission close to 100%.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 14:02:38 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Duperrier",
"R.",
""
],
[
"Ferdinand",
"R.",
""
],
[
"Gros",
"P.",
""
],
[
"Lagniel",
"J-M.",
""
],
[
"Pichoff",
"N.",
""
],
[
"Uriot",
"D.",
""
],
[
"CEA-Saclay",
"",
""
],
[
"DSM-DAPNIA-SEA",
"",
""
]
] |
physics/0008145
|
Robin Ferdinand
|
R. Ferdinand, P-Y. Beauvais, R. Duperrier, A. France, J. Gaiffier,
J-M. Lagniel, M. Painchault, F. Simoens, CEA-Saclay, DSM-DAPNIA-SEA, P.
Balleyguier, CEA-Bruyeres le Chatel, DAM
|
Status Report on the 5 Mev Iphi RFQ
|
3 pages, LINAC 2000
|
eConf C000821 (2000) TUD04
| null | null |
physics.acc-ph
| null |
A 5-MeV RFQ designed for a proton current up to 100-mA CW is now under
construction as part of the High Intensity Proton Injector project (IPHI). Its
computed transmission is greater than 99 %. The main goals of the project are
to verify the accuracy of the design codes, to gain the know-how on
fabrication, tuning procedures and operations, to measure the output beam
characteristics in order to optimise the higher energy part of the linac, and
to reach a high availability with minimum beam trips. A cold model has been
built to develop the tuning procedure. The present status of the IPHI RFQ is
presented.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 14:13:16 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Ferdinand",
"R.",
""
],
[
"Beauvais",
"P-Y.",
""
],
[
"Duperrier",
"R.",
""
],
[
"France",
"A.",
""
],
[
"Gaiffier",
"J.",
""
],
[
"Lagniel",
"J-M.",
""
],
[
"Painchault",
"M.",
""
],
[
"Simoens",
"F.",
""
],
[
"CEA-Saclay",
"",
""
],
[
"DSM-DAPNIA-SEA",
"",
""
],
[
"Balleyguier",
"P.",
""
],
[
"Chatel",
"CEA-Bruyeres le",
""
],
[
"DAM",
"",
""
]
] |
physics/0008147
|
Carlo Rossi
|
G. D'Auria, C. Rossi, M. Danailov, M. Ferrario, N. Piovella, L.
Serafini
|
The FaBrE Project at Trieste
|
LINAC2000 poster MOB07, 3 pages, 4 figures
|
eConf C000821 (2000) MOB07
| null | null |
physics.acc-ph
| null |
A program to design a high brilliance electron source suitable for a short
wavelength Linac-based FEL is presented. The goal of the project is to develop
a multi-cell integrated photoinjector capable of delivering 1 nC bunches with
emittance below 1 mm mrad. This will be the first step toward a possible
development of a IV generation light source test facility based on the existing
Trieste Linac. For this purpose a common program between Sincrotrone Trieste
and INFN-Milano has been undertaken. Here a brief description of the program
and the first results of the RF Gun electromagnetic structure with the beam
dynamics on the ELETTRA Linac are presented.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 14:40:02 GMT"
},
{
"version": "v2",
"created": "Tue, 22 Aug 2000 23:06:50 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"D'Auria",
"G.",
""
],
[
"Rossi",
"C.",
""
],
[
"Danailov",
"M.",
""
],
[
"Ferrario",
"M.",
""
],
[
"Piovella",
"N.",
""
],
[
"Serafini",
"L.",
""
]
] |
physics/0008148
|
Bernhard Schlitt
|
B. Schlitt, A. Bechtold, U. Ratzinger, A. Schempp
|
Design of the 7 MeV/u, 217 MHz Injector Linac for the Proposed Ion Beam
Facility for Cancer Therapy at the Clinic in Heidelberg
|
Contribution to the LINAC2000 Proceedings, Paper ID: MOD10
|
eConf C000821 (2000) MOD10
| null | null |
physics.acc-ph
| null |
A dedicated clinical synchrotron facility for cancer therapy using energetic
proton and ion beams (C, He and O) has been designed at GSI for the
Radiologische Universitaetsklinik at Heidelberg, Germany. The design of the
injector linac is presented. Suitable ion sources are discussed and results of
ion source test measurements are reported. The LEBT allows for switching
between two ion sources. A short RFQ accelerates the ions from 8 keV/u to 400
keV/u. It is followed by a very compact beam matching section and a 3.8 m long
IH-type drift tube linac for the acceleration to 7 MeV/u. Both rf structures
are designed for a resonance frequency of 216.816 MHz and for ion
mass-to-charge ratios up to A/q = 3 (12C4+, (H_3)+, 3He+, 16O6+).
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 14:48:07 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Schlitt",
"B.",
""
],
[
"Bechtold",
"A.",
""
],
[
"Ratzinger",
"U.",
""
],
[
"Schempp",
"A.",
""
]
] |
physics/0008150
|
C. Vermare
|
C. Vermare, D. C. Moir and G. J. Seitz
|
Optical Transition Radiation (OTR) Measurements of an Intense Pulsed
Electron Beam
|
3 pages, 7 figures
|
eConf C000821 (2000) MOc16
| null |
LA-UR-00-2064
|
physics.acc-ph physics.ins-det
| null |
We present the first time resolved OTR angular distribution measurements of
an intense pulsed electron beam (1.7 kA, 60 ns). These initial experiments on
the first axis of the Dual Axis Radiographic Hydro-Testing (DARHT) facility and
subsequent analysis, demonstrate the possibility to extract, from the data, the
energy and the divergence angle of a 3.8 and 20 MeV electrons.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 15:25:07 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Vermare",
"C.",
""
],
[
"Moir",
"D. C.",
""
],
[
"Seitz",
"G. J.",
""
]
] |
physics/0008151
|
Jong-Seok Oh
|
J. S. Oh, J. S. Bak, M. H. Cho, W. Namkung (PAL, Korea) K. H. Chung
(SNU, Korea) T. Shintake, H. Matsumoto(KEK, Japan)
|
Development of a Smart Modulator and Efficiency Evaluation of 500-GeV
e+e- C-Band Linear Collider
|
3 pages, 4 figures, Linac2000 paper ID No. THA12 file= THA12.pdf
|
eConf C000821 (2000) THA12
| null | null |
physics.acc-ph
| null |
An e+e- linear collider at 500-GeV C.M. (center of mass) has been proposed as
a future accelerator. The C-band linear collider has more than a thousand
klystrons and matching modulators. The linear colliders require smart
modulators with high reliability, compact and simple configuration, and good
power efficiency. This study suggests solutions to problems expected in the
future linear colliders. A C-band smart modulator has been developed using a
constant-current inverter power supply. The smart modulator provides 350-kV
pulses of the pulse-to-pulse stability of 0.35%, the pulse-width of 4.35
microseconds, and the repetition rate of 50 Hz. We also investigated the power
efficiency for the C-band scheme. A pulse efficiency of 75% can be achieved by
an optimized pulse transformer and the RF phase modulation. With pulsed
klystrons of 60% power efficiency, it is possible to achieve the RF system
efficiency of 32% with the wall-plug power of 170 MW.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 15:33:14 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Oh",
"J. S.",
"",
"PAL, Korea"
],
[
"Bak",
"J. S.",
"",
"PAL, Korea"
],
[
"Cho",
"M. H.",
"",
"PAL, Korea"
],
[
"Namkung",
"W.",
"",
"PAL, Korea"
],
[
"Chung",
"K. H.",
"",
"SNU, Korea"
],
[
"Shintake",
"T.",
"",
"KEK, Japan"
],
[
"Matsumoto",
"H.",
"",
"KEK, Japan"
]
] |
physics/0008153
|
Lawrence I. Donley
|
L.I. Donley, V.F. Stipp, F. R. Brumwell, G. E. McMichael
|
Reliability History and Improvements to the ANL 50 MEV H- Accelerator
|
3 pages, 1 figure
|
eConf C000821 (2000) TUD20
| null |
TUD20
|
physics.acc-ph
| null |
The H- Accelerator consists of a 750 keV Cockcroft Walton preaccelerator and
an Alvarez type 50 MeV linac. The accelerator has been in operation since 1961.
Since 1981, it has been used as the injector for the Intense Pulsed Neutron
Source (IPNS), a national user facility for neutron scattering. The linac
delivers about 3.5x1012 H- ions per pulse, 30 times per second (30 Hz), for
multi-turn injection to a 450 MeV Rapid Cycling Synchrotron (RCS). IPNS
presently operates about 4,000 hours per year, and operating when scheduled is
critical to meeting the needs of the user community. For many years the IPNS
injector/RCS has achieved an average reliability of 95%, helped in large part
by the preaccelerator/linac which has averaged nearly 99%. To maintain and
improve system reliability, records need to show what each subsystem
contributes to the total down time. The history of source and linac subsystem
reliability, and improvements that have been made to improve reliability, will
be described. Plans to maintain or enhance this reliability for at least
another ten years of operation, will also be discussed.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 16:00:10 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Donley",
"L. I.",
""
],
[
"Stipp",
"V. F.",
""
],
[
"Brumwell",
"F. R.",
""
],
[
"McMichael",
"G. E.",
""
]
] |
physics/0008155
|
Anatoly V. Titov
|
A.V.Titov, N.S.Mosyagin, A.B.Alekseyev, and R.J.Buenker
|
GRECP/MRD-CI calculations of the spin-orbit splitting in the ground
state of Tl and of the spectroscopic properties of TlH
|
20 pages, latex, no figures, more comutational details are available
at at http://www.QChem.PNPI.SPb.Ru
| null | null | null |
physics.chem-ph
| null |
The generalized relativistic effective core potential (GRECP) approach is
employed in the framework of multireference single- and double-excitation
configuration interaction (MRD-CI) method to calculate the spin-orbit (SO)
splitting in the $^2P^o$ ground state of the Tl atom and spectroscopic
constants for the $0^+$ ground state of TlH. The 21-electron GRECP for Tl is
used and the outer core 5s and 5p pseudospinors are frozen with the help of the
level shift technique. The spin-orbit selection scheme with respect to
relativistic multireference states and the corresponding code are developed and
applied in the calculations. In this procedure both correlation and spin-orbit
interactions are taken into account. A [4,4,4,3,2] basis set is optimized for
the Tl atom and employed in the TlH calculations. Very good agreement is found
for the equilibrium distance, vibrational frequency, and dissociation energy of
the TlH ground state ($R_e=1.870 \AA, \omega_e=1420 cm^{-1}, D_e=2.049 eV$) as
compared with the experimental data ($R_e=1.868 \AA, \omega_e=1391 cm^{-1},
D_e=2.06 eV$).
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 17:47:07 GMT"
},
{
"version": "v2",
"created": "Thu, 26 Oct 2000 17:52:17 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Titov",
"A. V.",
""
],
[
"Mosyagin",
"N. S.",
""
],
[
"Alekseyev",
"A. B.",
""
],
[
"Buenker",
"R. J.",
""
]
] |
physics/0008156
|
Henry L. Rutkowski
|
HL Rutkowski, LL Reginato, WL Waldron, KP Chow, MC Vella, WM Fawley, R
Briggs, S Nelson, Z Wolf, and D Birx
|
The DARHT Phase 2 Linac
|
3 pgs, 3 figs
|
eConf C000821 (2000) TUB08
| null | null |
physics.acc-ph
| null |
The second phase accelerator for the Dual Axis Hydrodynamic Test facility
(DARHT) is designed to provide an electron beam pulse that is 2 microsec long,
2kA, and 20 MeV in particle energy. The injector provides 3.2 MeV so that the
linac need only provide 16.8 MeV. The linac is made with two types of induction
accelerator cells. The first block of 8 cells have a 14 in. beam pipe compared
to 10 in. in the remaining 80 cells. The other principal difference is that the
first 8 cells have reduced volt-sec in their induction cores as a result of a
larger diameter beam pipe. The cells are designed for very reliable high
voltage operation. The insulator is Mycalex. Results from prototype tests are
given including results from solenoid measurements. Each cell contains a
solenoid for beam transport and a set of x-y correction coils to reduce
corkscrew motion. Details of tests to determine RF mode impedances relevant to
BBU generation are given. Blocks of cells are separated by "intercells" some of
which contain transport solenoids. The intercells provide vacuum pumping
stations as well. Issues of alignment and installation are discussed.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 20:57:20 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Rutkowski",
"HL",
""
],
[
"Reginato",
"LL",
""
],
[
"Waldron",
"WL",
""
],
[
"Chow",
"KP",
""
],
[
"Vella",
"MC",
""
],
[
"Fawley",
"WM",
""
],
[
"Briggs",
"R",
""
],
[
"Nelson",
"S",
""
],
[
"Wolf",
"Z",
""
],
[
"Birx",
"D",
""
]
] |
physics/0008158
|
Dr. Lloyd M. Young
|
L. M. Young (1), L. J. Rybarcyk (1), J. D. Schneider (1), M. E.
Schulze (2), and H. V. Smith (1) ((1) Los Alamos National Laboratory,
(2)General Atomics)
|
High Power Operations of LEDA
|
5 pages, 5 figures, submitted to the LINAC 2000 Conference, Paper
TU201
|
eConf C000821 (2000) TU201
| null |
LA-UR- 00-3650
|
physics.acc-ph
| null |
The LEDA RFQ, a 350-MHz continuous wave (CW) radio-frequency quadrupole
(RFQ), successfully accelerated a 100-mA CW proton beam from 75 keV to 6.7 MeV.
We have accumulated 111 hr of beam on time with at least 90 mA of CW output
beam current. The 8-m-long RFQ accelerates a dc, 75-keV, ~106-mA H+ beam from
the LEDA injector with ~94% transmission. When operating the RFQ at the RF
power level for which it was designed, the peak electrical field on the vane
tips is 33 MV/m. However, to maintain the high transmission quoted above with
the CW beam, it was necessary to operate the RFQ with field levels ~10% higher
than design. The RFQ dissipates 1.5 MW of RF power when operating with this
field. Three klystrons provide the 2.2 MW of RF power required by the RFQ to
accelerate the 100-mA beam. The beam power is 670 kW. Some of the challenges
that were met in accelerating a 100-mA CW proton beam to 6.7 MeV, will be
discussed.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 18:34:07 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Young",
"L. M.",
""
],
[
"Rybarcyk",
"L. J.",
""
],
[
"Schneider",
"J. D.",
""
],
[
"Schulze",
"M. E.",
""
],
[
"Smith",
"H. V.",
""
]
] |
physics/0008159
|
Patrick L. Colestock
|
P. L. Colestock, T. Wangler, C. K. Allen, R. L. Sheffield, D.
Gilpatrick(the Diagnostics Group), M. Thuot(the Controls Group), the LEDA
Operations Team, M. Schulze and A. Harvey
|
The Beam Halo Experiment at the LEDA Facility
|
Submitted to Linac2000, Monterey, Aug. 21st-25th, 2000
|
eConf C000821 (2000) THB07
| null | null |
physics.acc-ph
| null |
Due to the potentially adverse effects of the generation of halo particles in
intense proton beams, it is imperative to have a clear understanding of the
mechanisms that can lead to halo formation for current and proposed high-
intensity linacs. To this end a theoretical model has been developed, which
indicates that protons under the combined influence of strong space charge
forces and periodic focussing in a linear transport channel can be kicked into
halo orbits. However, no experimental measurements of beam halo in proton beams
have yet been carried out. In this paper we report the progress of an effort to
carry out an experiment to measure beam-halo using the existing high- intensity
proton beam of the LEDA facility. A linear transport channel has been assembled
with the appropriate diagnostics for measuring the expected small beam
component in the beam halo as a function of beam parameters. The experiment is
based on the use of an array of high-dynamic-range wire and beam scrapers to
determine the halo and core profiles along the transport channel. Details of
the experimental design, the expected halo measurement properties will be
presented.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 18:33:47 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Colestock",
"P. L.",
"",
"the Diagnostics Group"
],
[
"Wangler",
"T.",
"",
"the Diagnostics Group"
],
[
"Allen",
"C. K.",
"",
"the Diagnostics Group"
],
[
"Sheffield",
"R. L.",
"",
"the Diagnostics Group"
],
[
"Gilpatrick",
"D.",
"",
"the Diagnostics Group"
],
[
"Thuot",
"M.",
"",
"the Controls Group"
],
[
"Team",
"the LEDA Operations",
""
],
[
"Schulze",
"M.",
""
],
[
"Harvey",
"A.",
""
]
] |
physics/0008160
|
Anatoly V. Titov
|
A.V.Titov and N.S.Mosyagin
|
Generalized Relativistic Effective Core Potential Method: Theory and
calculations
|
22 pages, latex, no figures
| null | null | null |
physics.chem-ph physics.atom-ph physics.comp-ph
| null |
In calculations of heavy-atom molecules with the shape-consistent
Relativistic Effective Core Potential (RECP), only valence and some outer-core
shells are treated explicitly, the shapes of spinors are smoothed in the atomic
core regions and the small components of four-component spinors are excluded
from calculations. Therefore, the computational efforts can be dramatically
reduced.
However, in the framework of the standard nodeless radially local RECP
versions, any attempt to extend the space of explicitly treated electrons more
than some limit does not improve the accuracy of the calculations. The errors
caused by these (nodeless) RECPs can range up to 2000 $cm^{-1}$ and more for
the dissociation and transition energies even for lowest-lying excitations that
can be unsatisfactory for many applications. Moreover, the direct calculation
of such properties as electronic densities near heavy nuclei, hyperfine
structure, and matrix elements of other operators singular on heavy nuclei is
impossible as a result of the smoothing of the orbitals in the core regions.
In the present paper, ways to overcome these disadvantages of the RECP method
are discussed. The developments of the RECP method suggested by the authors are
studied in many precise calculations of atoms and of the TlH, HgH molecules.
The technique of nonvariational restoration of electronic structure in cores of
heavy atoms in molecules is applied to calculation of the P,T-odd
spin-rotational Hamiltonian parameters including the weak interaction terms
which break the symmetry over the space inversion (P) and time-reversal
invariance (T) in the PbF, HgF, BaF, and YbF molecules.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 18:58:17 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Titov",
"A. V.",
""
],
[
"Mosyagin",
"N. S.",
""
]
] |
physics/0008161
|
Sung-il Kwon
|
Sung-il Kwon (1), Yi-Ming Wang (1), Amy Regan (1), Tony Rohlev (1),
Mark Prokop (2), Dave Thomson (2) ((1) LANL, (2)Honeywell FM&T)
|
SNS Superconducting Cavity Modeling -Iterative Learning Control
|
For Linac2000, Paper ID TUC13, 3 pages, 3 figures, The summary of the
technical report, LANSCE-5-TN-00-014, Los Alamos Nation Lab., July, 2000
|
eConf C000821 (2000) TUc13
| null | null |
physics.acc-ph
| null |
The SNS SRF system is operated with a pulsed beam. For the SRF system to
track the repetitive reference trajectory, a feedback and a feedforward
controllers has been proposed. The feedback controller is to guarantee the
closed loop system stability and the feedforward controller is to improve the
tracking performance for the repetitive reference trajectory and to suppress
the repetitive disturbance. As the iteration number increases, the error
decreases.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 20:55:04 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Kwon",
"Sung-il",
"",
"LANL"
],
[
"Wang",
"Yi-Ming",
"",
"LANL"
],
[
"Regan",
"Amy",
"",
"LANL"
],
[
"Rohlev",
"Tony",
"",
"LANL"
],
[
"Prokop",
"Mark",
"",
"Honeywell FM&T"
],
[
"Thomson",
"Dave",
"",
"Honeywell FM&T"
]
] |
physics/0008162
|
Rami A. Kishek
|
R. A. Kishek, P. G. O'Shea, and M. Reiser
|
Energy Transfer Mechanisms and Equipartitioning in non-Equilibrium
Space- Charge-Dominated Beams
|
LINAC 2000 Conference Proceedings Paper ID: MOE19 3 pages, 3 figures
|
eConf C000821 (2000) MOE19
| null | null |
physics.acc-ph physics.comp-ph
| null |
A process of energy transfer is demonstrated in non-equilibrium charged
particle beams with anisotropy and space charge. Equipartitioning of energy
between available degrees of freedom occurs in just a few betatron wavelengths,
without halo formation. Collective space charge modes similar to those observed
in recent experiments provide the underlying coupling mechanism. Since
laboratory beams are commonly far from equilibrium, the traditional K-V
stability analysis does not necessarily apply, implying that selection of an
operating point based on theory does not necessarily avoid equipartitioning.
Furthermore, the rate of equipartitioning is shown to depend on a single free
parameter related space charge content of the final (equipartitioned) beam, and
does not depend on how the kinetic energy is initially distributed between the
two planes.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 20:06:07 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Kishek",
"R. A.",
""
],
[
"O'Shea",
"P. G.",
""
],
[
"Reiser",
"M.",
""
]
] |
physics/0008163
|
Yi-Ming Wang
|
Y.M. Wang, S.I. Kwon, and A.H. Regan
|
Analysis and Synthesis of the SNS Superconducting RF Control System
|
LINAC2000, TUC16
|
eConf C000821 (2000) TUc16
| null | null |
physics.acc-ph physics.ins-det
| null |
The RF system for the SNS superconducting linac consists of a superconducting
cavity, a klystron, and a low-level RF (LLRF) control system. For a proton
linac like SNS, the field in each individual cavity needs to be controlled to
meet the overall system requirements. The purpose of the LLRF control system is
to maintain the RF cavity field to a desired magnitude and phase by controlling
the klystron driver signal. The Lorentz force detuning causes the shift of the
resonant frequency during the normal operation in the order of a few hundreds
hertz. In order to compensate the Lorentz force detuning effects, the cavity is
pre-tuned into the middle of the expected frequency shift caused by the Lorentz
force detuning. Meanwhile, to reduce the overshoot in the transient response, a
feed-forward algorithm, a linear parameter varying gain scheduling (LPV-GS)
controller, is proposed to get away a repetitive noised caused by the pulsed
operation as well as the Lorentz force detuning effects.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 20:55:26 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Wang",
"Y. M.",
""
],
[
"Kwon",
"S. I.",
""
],
[
"Regan",
"A. H.",
""
]
] |
physics/0008164
|
YounJoon Jung
|
Y. Jung, R. J. Silbey, and J. Cao
|
Electronic coherence in mixed-valence systems: Spectral analysis
|
24 pages, 11 figures
|
J. Phys. Chem.A, vol.103, 9460-9468 (1999)
| null | null |
physics.chem-ph cond-mat.stat-mech
| null |
The electron transfer kinetics of mixed-valence systems is studied via
solving the eigen-structure of the two-state non-adiabatic diffusion operator
for a wide range of electronic coupling constants and energy bias constants.
The calculated spectral structure consists of three branches in the
eigen-diagram, a real branch corresponding to exponential or multi-exponential
decay and two symmetric branches corresponding to population oscillations
between donor and acceptor states. The observed electronic coherence is shown
as a result of underdamped Rabi oscillations in an overdamped solvent
environment. The time-evolution of electron population is calculated by
applying the propagator constructed from the eigen-solution to the
non-equilibrium initial preparation, and it agrees perfectly with the result of
a direct numerical propagation of the density matrix. The resulting population
dynamics confirms that increasing the energy bias destroys electronic
coherence.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 21:56:14 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Jung",
"Y.",
""
],
[
"Silbey",
"R. J.",
""
],
[
"Cao",
"J.",
""
]
] |
physics/0008165
|
Timothy L. Houck
|
G. Guethlein, T. Houck, J. McCarrick, and S. Sampayan (LLNL)
|
Faraday Cup Measurements of Ions Backstreaming into a Electron Beam
Impinging on a Plasma Plume*
|
TUB14 LINAC 2000
|
eConf C000821 (2000) TUB14
| null |
UCRL-JC-138397
|
physics.acc-ph
| null |
The next generation of radiographic machines based on induction accelerators
is expected to generate multiple, small diameter x-ray spots of high intensity.
Experiments to study the interaction of the electron beam with plasmas
generated at the x-ray converter and at beamline septa are being performed at
the Lawrence Livermore National Laboratory (LLNL) using the 6-MeV, 2-kA
Experimental Test Accelerator (ETA) electron beam. The physics issues of
concern can be separated into two categories. The interaction of subsequent
beam pulses with the expanding plasma plume generated by earlier pulses
striking the x-ray converter or a septum, and the more subtle effect involving
the extraction of light ions from a plasma by the head of the beam pulse. These
light ions may be due to contaminants on the surface of the beam pipe or
converter, or, for subsequent pulses, in the material of the converter. The
space charge depression of the beam could accelerate the light ions to
velocities of several mm/ns. As the ions moved through the body of the incoming
pulse, the beam would be pinched resulting in a moving focus prior to the
converter and a time varying x-ray spot. Studies of the beam-generated plasma
at the x-ray converter have been previously reported. In this paper we describe
Faraday cup measurements performed to detect and quantify the flow of
backstreaming ions as the ETA beam pulse impinges on preformed plasma.
* This work was performed under the auspices of the U.S. Department of Energy
by University of California Lawrence Livermore National Laboratory under
contract No. W-7405-Eng-48.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 23:36:35 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Guethlein",
"G.",
"",
"LLNL"
],
[
"Houck",
"T.",
"",
"LLNL"
],
[
"McCarrick",
"J.",
"",
"LLNL"
],
[
"Sampayan",
"S.",
"",
"LLNL"
]
] |
physics/0008166
|
Christine M. Celata
|
C.M. Celata
|
Overview of the Heavy Ion Fusion Program
|
5 pages, 2 figures
|
eConf C000821 (2000) WE202
| null |
LBNL-46555
|
physics.acc-ph
| null |
The world Heavy Ion Fusion (HIF) Program for inertial fusion energy is
looking toward the development and commissioning of several new experiments.
Recent and planned upgrades of the facilities at GSI, in Russia, and in Japan
greatly enhance the ability to study energy deposition in hot dense matter.
Worldwide target design developments have focused on non-ignition targets for
nearterm experiments and designs which, while lowering the energy required for
ignition, tighten accelerator requirements. The U.S program is transitioning
between scaled beam dynamics experiments and high current experiments with
power-plant-driver-scale beams. Current effort is aimed at preparation for the
next-step large facility, the Integrated Research Experiment (IRE)-- an
induction linac accelerating multiple beams to a few hundred MeV, then focusing
to deliver tens of kilojoules to a target. The goal is to study heavy ion
energy deposition, and to test all of the components and physics needed for an
engineering test of a power plant driver and target chamber. This paper will
include an overview of the Heavy Ion Fusion program abroad and a more in-depth
view of the progress and plans of the U.S. program.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 23:29:19 GMT"
},
{
"version": "v2",
"created": "Wed, 23 Aug 2000 21:56:13 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Celata",
"C. M.",
""
]
] |
physics/0008167
|
Karl Bane
|
K. L. F. Bane and Z. Li
|
Dipole Mode Detuning in the NLC Injector Linacs
|
3 pages, 4 figures, 1 cls file
|
eConf C000821 (2000) TUA06
| null |
SLAC-PUB-8545
|
physics.acc-ph
| null |
The injector linacs of the JLC/NLC comprise the e+ booster, the e- drive
linac, the e+ booster, and the two prelinacs. These four systems together
transport the two types of beams from the 80 MeV point at the end of their
respective bunchers up to the storage rings, and then from the storage rings to
the 10 GeV point at the beginning of the bunch compressors. Nominally, the e+
booster structure will be L-band and the others S-band. In transport through
these linacs it is important that the emittances and particle losses stay
within specified tolerances. In particular, the effects of the dipole
wakefield-especially the long-range dipole wakefield-need to be carefully
considered. We present designs of the injector linac structures that employ
simple mode detuning, without damping, and that allow us to satisfy our
tolerance requirements, for both the nominal (2.8 ns) and alternate (1.4 ns)
bunch spacing options.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 02:32:58 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Bane",
"K. L. F.",
""
],
[
"Li",
"Z.",
""
]
] |
physics/0008168
|
Stanislav Vinogradov
|
A.I.Dzergatch and S.V.Vinogradov
|
Collective Acceleration of Ions by Means of Plasmoids in RF Wells of
Frequency-Modulated Laser Field
|
LINAC 2000 conference report. 3 pages, 4 figures
|
eConf C000821 (2000) THc14
| null | null |
physics.acc-ph physics.comp-ph
| null |
The proposed linear accelerator ("scanator") consists of a terawatt table-top
laser and a set of passive elements - beam splitters, dispersion elements for
stretching of the laser pulse and chirping of the splitted beams, and
dispersion elements for angle scanning of crossed frequency-modulated laser
beams. Ions are trapped and accelerated in RF wells by the electron component
of plasmoids in the intersection zone of the scanning laser beams.
Computational studies give encouraging results. A proof-of-principle experiment
on the base of a table-top laser is outlined.
|
[
{
"version": "v1",
"created": "Fri, 18 Aug 2000 23:52:25 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Dzergatch",
"A. I.",
""
],
[
"Vinogradov",
"S. V.",
""
]
] |
physics/0008169
|
Steve P. Virostek
|
S. Virostek, J. Staples
|
Analysis of Thermally Induced Frequency Shift for the Spallation Neutron
Source RFQ
|
3 pages, Linac 200 Conference, Paper ID THD04
|
eConf C000821 (2000) THD04
| null | null |
physics.acc-ph
| null |
The Spallation Neutron Source (SNS) Front-End Systems Group at Lawrence
Berkeley National Lab (LBNL) is developing a Radio Frequency Quadrupole (RFQ)
to accelerate an H- beam from 65 keV to 2.5 MeV at the operating frequency of
402.5 MHz. The 4 section, 3.7 meter long RFQ is a 4 vane structure operating at
6% duty factor. The cavity walls are made from OFE Copper with a GlidCop outer
layer to add mechanical strength. A set of 12 cooling channels in the RFQ
cavity walls are fed and controlled separately from 4 channels embedded in the
vanes. An ANSYS finite-element model has been developed to calculate the
deformed shape of the cavity for given RF heat loads and cooling water
temperatures. By combining the FEA results with a SUPERFISH RF cavity
simulation, the relative shift in frequency for a given change in coolant
temperature or heat load can be predicted. The calculated cavity frequency
sensitivity is -33 kHz per 1 degC change in vane water temperature with
constant-temperature wall water. The system start-up transient was also studied
using the previously mentioned FEA model. By controlling the RF power ramp rate
and the independent wall and vane cooling circuit temperatures, the system
turn-on time can be minimized while limiting the frequency shift.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 00:24:03 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Virostek",
"S.",
""
],
[
"Staples",
"J.",
""
]
] |
physics/0008171
|
Ronald Akre
|
R. Akre, V. Bharadwaj, P. Emma, P. Krejcik
|
SLAC Linac RF Performance for LCLS
|
3 pages, 2 figures - 4 bit maps, THC11
|
eConf C000821 (2000) THc11
| null |
SLAC-PUB-8574
|
physics.acc-ph
| null |
The Linac Coherent Light Source (LCLS) project at SLAC uses a dense 15 GeV
electron beam passing through a long undulator to generate extremely bright
x-rays at 1.5 angstroms. The project requires electron bunches with a nominal
peak current of 3.5kA and bunch lengths of 0.020mm (70fs). The bunch
compression techniques used to achieve the high brightness impose challenging
tolerances on the accelerator RF phase and amplitude. The results of
measurements on the existing SLAC linac RF phase and amplitude stability are
summarised and improvements needed to meet the LCLS tolerances are discussed.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 01:19:06 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Akre",
"R.",
""
],
[
"Bharadwaj",
"V.",
""
],
[
"Emma",
"P.",
""
],
[
"Krejcik",
"P.",
""
]
] |
physics/0008172
|
Nobu Toge
|
N. Toge (KEK)
|
JLC Progress
|
MO204, submitted to XX'th International Linac Conference (LINAC
2000). 5 pages, 8 figures
|
eConf C000821 (2000) MO204
| null | null |
physics.acc-ph
| null |
The JLC is a linear collider project pursued in Japan by researchers centered
around KEK. The R&D status for the JLC project is presented, with emphasis on
recent results from ATF concerning studies of production of ultra-low emittance
beams and from manufacturing research on X-band accelerator structures.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 02:16:46 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Toge",
"N.",
"",
"KEK"
]
] |
physics/0008174
|
Milorad Popovic
|
Milorad Popovic
|
2GeV Superconducting Muon Linac
|
Linac2000 THC06
|
eConf C000821 (2000) THc06
| null | null |
physics.acc-ph
| null |
A muon collider as well as a neutrino factory requires a large number of
muons with a kinetic energy of 50GeV or more. Muon survival demands a high
gradient linac. The large transverse and longitudinal emittance of the muon
beam coming from a muon cooling system implies the need for a large acceptance,
acceleration system. These two requirements point clearly to a linac based on
superconducting technology. The design of a 2GeV Superconducting muon Linac
based on computer programs developed at LANL will be presented. The design is
based on the technology available today or components that will be avaible in
the very near future.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 03:01:03 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Popovic",
"Milorad",
""
]
] |
physics/0008175
|
Zenei Igarashi
|
Z.Igarashi, K.Nanmo, T.Takenaka and E.Takasaki
|
Beam Energy Stabilization of the Kek 40mev Proton Linac
|
3pages, 8figures International Linac Conference(LINC2000)
|
eConf C000821 (2000) THB09
| null |
THB09
|
physics.acc-ph
| null |
The new method to stabilize the beam energy of the KEK 40MeV proton linac, is
developed now. In this method, the signal of the velocity monitor installed
upstream the debuncher in the 40MeV beam line, is processed and then fed to the
phase shifter of the debuncher rf system so as to cancel the fluctuation of the
beam energy. In this article, the beam tests to prove the validity of this
method and the system are described.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 03:52:42 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Igarashi",
"Z.",
""
],
[
"Nanmo",
"K.",
""
],
[
"Takenaka",
"T.",
""
],
[
"Takasaki",
"E.",
""
]
] |
physics/0008176
|
Milorad Popovic
|
M. Popovic, L. Allen, A. Moretti, E. McCrory, C.W. Schmidt and T.
Sullivan
|
High Current Proton Tests of the Fermilab Linac
|
Linac2000 TUD16
|
eConf C000821 (2000) TUD16
| null | null |
physics.acc-ph
| null |
The peak current limit for the Fermilab Linac was recently studied. The
purpose was to learn what components of the present Linac can be used for the
first stage of a proposed proton driver[1]. For this application the Linac must
provide a H- beam in excess of 5000 mA-msec per pulse. The original Fermilab
Linac was designed for protons with a peak current of 75 mA and a pulse length
of four Booster turns (~10 msec). The high energy replacement was designed for
a peak current of 35 mA and a beam pulse length of 50 msec. The present H-
source cannot deliver more than ~80 mA which produces 55 mA in the Linac. Using
a proton source allows the system to be tested to currents of ~100 mA and pulse
lengths long enough to observe the effects of long pulses. This test has shown
that the present Linac can accelerate beam having a peak current up to ~85 mA
with beam loss comparable to the present Linac operation (~45 mA). The results
of the test will be presented.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 03:36:11 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Popovic",
"M.",
""
],
[
"Allen",
"L.",
""
],
[
"Moretti",
"A.",
""
],
[
"McCrory",
"E.",
""
],
[
"Schmidt",
"C. W.",
""
],
[
"Sullivan",
"T.",
""
]
] |
physics/0008177
|
Valery A. Dolgashev
|
Valery A. Dolgashev, Sami G. Tantawi
|
2D Simulation of High-Efficiency Cross-Field RF Power Sources
|
3 pages, 1 figure, 1 cls file, submitted to LINAC2000 as THA06
|
eConf C000821 (2000) THA06
| null | null |
physics.acc-ph
| null |
An efficient method for frequency domain analysis of 2D cross-field devices
is presented. This work was done to analyze and design high efficiency
magnetrons. Arbitrary device-geometries are described by a piecewise planar
boundary. The method is based on an expansion of the electromagnetic fields
into a set of cavity eigenmodes. In order to obtain the self-consistent
solution, iterations are performed until the energy balance is reached. A
boundary integration method is used to take into account space charge effects.
The cavity eigenmodes are found by a method based on the scattering matrix
technique. The geometry is divided into regions. The boundary contour
mode-matching method is used to obtain the scattering matrices for each region.
Electromagnetic fields in each region are expanded into a series of plane
waves. Due to choice of plane wave expansion, all integration in the
mode-matching process is carried out analytically. The scattering matrices of
the regions are combined using a generalized scattering matrix technique to
obtain the scattering matrix for the full geometry, and then the eigenmode
resonance frequencies and the fields. Periodic boundary condition is used for
the field calculation and the particle tracking.
|
[
{
"version": "v1",
"created": "Sun, 20 Aug 2000 21:09:52 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Dolgashev",
"Valery A.",
""
],
[
"Tantawi",
"Sami G.",
""
]
] |
physics/0008179
|
Kazuo Yoshino
|
K. Yoshino, E. Takasaki, F. Naito, T. Kato, Y. Yamazaki (KEK), K.
Tajiri, T. Kawasumi, Y. Imoto, Z. Kabeya (Mitsubishi Heavy Industries)
|
Development of a DTL Quadrupole Magnet with a New Electroformed Hollow
Coil for the Jaeri/Kek Joint Project
| null |
eConf C000821 (2000) TUD10
| null |
TUD10
|
physics.acc-ph
| null |
Quadrupole electromagnets have been developed with a hollow coil produced
using an improved periodic reverse electroforming. These will be installed in
each of the drift tubes of the DTL (324 MHz) as part of the JAERI/KEK Joint
Project at the high-intensity proton accelerator facility. Measurements of the
magnets' properties were found to be consistent with computer-calculated
estimated. The details of the design, the fabrication process, and the
measurement results for the quadrupole magnet are described.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 08:25:06 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Yoshino",
"K.",
"",
"KEK"
],
[
"Takasaki",
"E.",
"",
"KEK"
],
[
"Naito",
"F.",
"",
"KEK"
],
[
"Kato",
"T.",
"",
"KEK"
],
[
"Yamazaki",
"Y.",
"",
"KEK"
],
[
"Tajiri",
"K.",
"",
"Mitsubishi Heavy Industries"
],
[
"Kawasumi",
"T.",
"",
"Mitsubishi Heavy Industries"
],
[
"Imoto",
"Y.",
"",
"Mitsubishi Heavy Industries"
],
[
"Kabeya",
"Z.",
"",
"Mitsubishi Heavy Industries"
]
] |
physics/0008181
|
Andrei Kolomiets
|
A. Kolomiets, S. Yaramishev (ITEP, Moscow, Russia)
|
Study of Nonlinearities and Small Particle Losses in High Power Linac
|
LINAC2000, THB04
|
eConf C000821 (2000) THB04
| null | null |
physics.acc-ph
| null |
The conception of High Power Linac developed in Russian accelerator centres
is based on the use of independently phased SC resonators with quadrupole
lenses between them. The type and parameters of the resonators as well as
focusing structure are varied along the linac to optimise beam dynamics and the
characteristics of the linac. The beam evolution in the linac was studied by
simulation in 3D accelerating and focusing fields by computer code DYNAMION.
The simulation includes all nonlinearities of external fields and space
charge forces. Estimations of particle losses in the beam based on analysis of
the spectral properties of particle trajectories were carried out.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 17:06:00 GMT"
},
{
"version": "v2",
"created": "Tue, 22 Aug 2000 23:15:10 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Kolomiets",
"A.",
"",
"ITEP, Moscow, Russia"
],
[
"Yaramishev",
"S.",
"",
"ITEP, Moscow, Russia"
]
] |
physics/0008182
|
Lisa A. Day & Martin Pieck
|
L. A. Day, M. Pieck, D. Barr, K. U. Kasemir, B. A. Quintana, G. A.
Salazar, M. W. Stettler (Los Alamos, Los Alamos National Laboratory, NM, USA)
|
Control System for the LEDA 6.7-MeV Proton Beam Halo Experiment
|
LINAC2000 Conference, 4 pgs
|
eConf C000821 (2000) TUc15
| null | null |
physics.acc-ph
| null |
Measurement of high-power proton beam-halo formation is the ongoing
scientific experiment for the Low Energy Demonstration Accelerator (LEDA)
facility. To attain this measurement goal, a 52-magnet beam line containing
several types of beam diagnostic instrumentation is being installed. The
Experimental Physics and Industrial Control System (EPICS) and commercial
software applications are presently being integrated to provide a real-time,
synchronous data acquisition and control system. This system is comprised of
magnet control, vacuum control, motor control, data acquisition, and data
analysis. Unique requirements led to the development and integration of
customized software and hardware. EPICS real-time databases, Interactive Data
Language (IDL) programs, LabVIEW Virtual Instruments (VI), and State Notation
Language (SNL) sequences are hosted on VXI, PC, and UNIX-based platforms which
interact using the EPICS Channel Access (CA) communication protocol.
Acquisition and control hardware technology ranges from DSP-based diagnostic
instrumentation to the PLC-controlled vacuum system. This paper describes the
control system hardware and software design, and implementation.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 17:09:52 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Day",
"L. A.",
"",
"Los Alamos, Los Alamos National Laboratory, NM, USA"
],
[
"Pieck",
"M.",
"",
"Los Alamos, Los Alamos National Laboratory, NM, USA"
],
[
"Barr",
"D.",
"",
"Los Alamos, Los Alamos National Laboratory, NM, USA"
],
[
"Kasemir",
"K. U.",
"",
"Los Alamos, Los Alamos National Laboratory, NM, USA"
],
[
"Quintana",
"B. A.",
"",
"Los Alamos, Los Alamos National Laboratory, NM, USA"
],
[
"Salazar",
"G. A.",
"",
"Los Alamos, Los Alamos National Laboratory, NM, USA"
],
[
"Stettler",
"M. W.",
"",
"Los Alamos, Los Alamos National Laboratory, NM, USA"
]
] |
physics/0008184
|
Ostroumov
|
P.N. Ostroumov, K.W. Shepard, V.N. Aseev, A.A. Kolomiets
|
Heavy-Ion Beam Acceleration of Two-Charge States from an Ecr Ion Source
|
LINAC2000, MOD01
|
eConf C000821 (2000) MOD01
| null | null |
physics.acc-ph
| null |
This paper describes a design for the front end of a superconducting (SC) ion
linac which can accept and simultaneously accelerate two charge states of
uranium from an ECR ion source. This mode of operation increases the beam
current available for the heaviest ions by a factor of two. We discuss the 12
MeV/u prestripper section of the Rare Isotope Accelerator (RIA) driver linac
including the LEBT, RFQ, MEBT and SC sections, with a total voltage of 112 MV.
The LEBT consists of two bunchers and electrostatic quadrupoles. The
fundamental frequency of both bunchers is half of the RFQ frequency. The first
buncher is a multiharmonic buncher, designed to accept more than 80% of each
charge state and to form bunches of extremely low longitudinal emittance (rms
emittance is lower than 0.2 keV/u nsec) at the output of the RFQ. The second
buncher is located directly in front of the RFQ and matches the velocity of
each charge-state bunch to the design input velocity of the RFQ. We present
full 3D simulations of a two-charge-state uranium beam including space charge
forces in the LEBT and RFQ, realistic distributions of all electric and
magnetic fields along the whole prestripper linac, and the effects of errors,
evaluated for several design options for the prestripper linac. The results
indicate that it is possible to accelerate two charge states while keeping
emittance growth within tolerable limits.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 17:52:31 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Ostroumov",
"P. N.",
""
],
[
"Shepard",
"K. W.",
""
],
[
"Aseev",
"V. N.",
""
],
[
"Kolomiets",
"A. A.",
""
]
] |
physics/0008185
|
Ostroumov
|
P.N. Ostroumov, R.C. Pardo, G.P. Zinkann, K.W. Shepard, J.A. Nolen
|
Multiple Charge State Beam Acceleration at Atlas
|
LINAC2000, MOD02
|
eConf C000821 (2000) MOD02
| null | null |
physics.acc-ph
| null |
A test of the acceleration of multiple charge-state uranium beams was
performed at the ATLAS accelerator. A 238U+26 beam was accelerated in the ATLAS
PII linac to 286 MeV (~1.2 MeV/u) and stripped in a carbon foil located 0.5 m
from the entrance of the ATLAS Booster section. A 58Ni9+ 'guide' beam from the
tandem injector was used to tune the Booster for 238U+38. All charge states
from the stripping were injected into the booster and accelerated. Up to 94% of
the beam was accelerated through the Booster linac, with losses mostly in the
lower charge states. The measured beam properties of each charge state and a
comparison to numerical simulations are reported in this paper.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 17:55:50 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Ostroumov",
"P. N.",
""
],
[
"Pardo",
"R. C.",
""
],
[
"Zinkann",
"G. P.",
""
],
[
"Shepard",
"K. W.",
""
],
[
"Nolen",
"J. A.",
""
]
] |
physics/0008186
|
Walter P. Lysenko
|
W.P. Lysenko, J.D. Gilpatrick, L.J. Rybarcyk, J.D. Schneider, H.V.
Smith Jr, L.M. Young and M.E. Schulze
|
Determining Phase-Space Properties of the LEDA RFQ Output Beam
|
LINAC2000 conference, paper THB08
|
eConf C000821 (2000) THB08
| null | null |
physics.acc-ph
| null |
Quadrupole scans were used to characterize the LEDA RFQ beam. Experimental
data were fit to computer simulation models for the rms beam size. The codes
were found to be inadequate in accurately reproducing details of the wire
scanner data. When this discrepancy is resolved, we plan to fit using all the
data in wire scanner profiles, not just the rms values, using a 3-D nonlinear
code.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 18:55:17 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Lysenko",
"W. P.",
""
],
[
"Gilpatrick",
"J. D.",
""
],
[
"Rybarcyk",
"L. J.",
""
],
[
"Schneider",
"J. D.",
""
],
[
"Smith",
"H. V.",
"Jr"
],
[
"Young",
"L. M.",
""
],
[
"Schulze",
"M. E.",
""
]
] |
physics/0008187
|
Masayoshi Sugimoto
|
M. Sugimoto, M. Kinsho, H. Takeuchi
|
Concept of Staged Approach for International Fusion Materials
Irradiation Facility
|
3 pages, Linac2000 paper ID No. TUE16
|
eConf C000821 (2000) TUE16
| null | null |
physics.acc-ph
| null |
The intense neutron source for development of fusion materials planned by
international collaboration makes a new step to clarify the technical issues
for realizing the 40 MeV, 250 mA deuteron beam facility. The baseline concept
employs two identical 125 mA linac modules whose beams are combined at the
flowing lithium target. Recent work for reducing the cost loading concerns the
staged deployment of the full irradiation capability in three steps. The
Japanese activity about the design and development study about IFMIF
accelerator in this year is presented and the schedule of next several years is
overviewed.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 19:21:00 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Sugimoto",
"M.",
""
],
[
"Kinsho",
"M.",
""
],
[
"Takeuchi",
"H.",
""
]
] |
physics/0008188
|
Edward G. Cook
|
E.G. Cook, B.S. Lee, S.A. Hawkins, F.V. Allen, B.C. Hickman, H.C.
Kirbie, C.A. Brooksby
|
Inductive-Adder Kicker Modulator for Darht-2
|
LINAC2000 TUC10, 3 pages
|
eConf C000821 (2000) TUc10
| null |
UCRL-JC-138494
|
physics.acc-ph
| null |
An all solid-state kicker modulator for the Dual-Axis Radiographic
Hydrodynamic Test facility (DARHT-2) has been designed and tested. This kicker
modulator uses multiple solid-state modules stacked in an inductive-adder
configuration where the energy is switched into each section of the adder by a
parallel array of MOSFETs. The modulator features very fast rise and fall
times, pulse width agility and a high pulse-repetition rate in burst mode. The
modulator can drive a 50* cable with voltages up to 20 kV and can be easily
configured for either positive or negative polarity. The presentation will
include test data collected from both the ETA II accelerator kicker and
resistive dummy loads.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 21:19:14 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Cook",
"E. G.",
""
],
[
"Lee",
"B. S.",
""
],
[
"Hawkins",
"S. A.",
""
],
[
"Allen",
"F. V.",
""
],
[
"Hickman",
"B. C.",
""
],
[
"Kirbie",
"H. C.",
""
],
[
"Brooksby",
"C. A.",
""
]
] |
physics/0008189
|
Edward G. Cook
|
E.G. Cook
|
Review of Solid-State Modulators
|
LINAC2000 WE103, 5 pages
|
eConf C000821 (2000) WE103
| null |
UCRL-JC-138493
|
physics.acc-ph
| null |
Solid-state modulators for pulsed power applications have been a goal since
the first fast high-power semiconductor devices became available. Recent
improvements in both the speed and peak power capabilities of semiconductor
devices developed for the power conditioning and traction industries have led
to a new generation of solid-state switched high power modulators with
performance rivaling that of hard tube modulators and thyratron switched
line-type modulators. These new solid-state devices offer the promise of higher
efficiency and longer lifetimes at a time when availability of standard
technologies is becoming questionable. A brief discussion of circuit topologies
and solid-state devices is followed by examples of modulators currently in use
or in test. This presentation is intended to give an overview of the current
capabilities of solid-state modulators in various applications.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 21:25:26 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Cook",
"E. G.",
""
]
] |
physics/0008190
|
Rui Li
|
R. Li
|
Analysis and Simulation on the Enhancement of the CSR Effects
|
3 pages, 4 figures, LINAC2000, MOE01
|
eConf C000821 (2000) MOE01
| null | null |
physics.acc-ph
| null |
Recent measurements of the coherent synchrotron radiation (CSR) effects
indicated that the observed beam emittance growth and energy modulation are
often bigger than previous predictions based on Gaussian longitudinal charge
distributions. In this paper, by performing a model study, we show both
analytically and numerically that when the longitudinal bunch charge
distribution involves concentration of charges in a small fraction of the bunch
length, enhancement of the CSR self-interaction beyond the Gaussian prediction
may occur. The level of this enhancement is sensitive to the level of the local
charge concentration.
|
[
{
"version": "v1",
"created": "Sun, 20 Aug 2000 06:57:11 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Li",
"R.",
""
]
] |
physics/0008192
|
Andrei Seryi
|
Andrei Seryi, Tor Raubenheimer
|
Ground Motion Model of the SLAC Site
|
submitted to XX International Linac Conference
|
eConf C000821 (2000) MOA13
| null |
moa13
|
physics.acc-ph
| null |
We present a ground motion model for the SLAC site. This model is based on
recent ground motion studies performed at SLAC as well as on historical data.
The model includes wave-like, diffusive and systematic types of motion. An
attempt is made to relate measurable secondary properties of the ground motion
with more basic characteristics such as the layered geological structure of the
surrounding earth, depth of the tunnel, etc. This model is an essential step in
evaluating sites for a future linear collider.
|
[
{
"version": "v1",
"created": "Sat, 19 Aug 2000 23:03:43 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Seryi",
"Andrei",
""
],
[
"Raubenheimer",
"Tor",
""
]
] |
physics/0008194
|
Mark D. Woodley
|
M. D. Woodley and P. E. Emma (SLAC, Stanford, CA, USA)
|
Measurement and Correction of Cross-Plane Coupling in Transport Lines
|
PDF file (3 pages, 2 equations, 7 figures); submitted to Linac2000
(August 21-25, 2000, Monterey, CA, USA), paper ID: MOC19
|
eConf C000821 (2000) MOc19
| null |
SLAC-PUB-8581
|
physics.acc-ph
| null |
In future linear colliders the luminosity will depend on maintaining the
small emittance aspect ratio delivered by damping rings. Correction of
cross-plane coupling can be important in preventing dilution of the beam
emittance. In order to minimize the vertical emittance, especially for a flat
beam, it is necessary to remove all cross-plane (x-y) correlations. This paper
studies emittance measurement and correction for coupled beams in the presence
of realistic measurement errors. The results of simulations show that
reconstruction of the full 4x4 beam matrix can be misleading in the presence of
errors. We suggest more robust tuning procedures for minimizing linear
coupling.
|
[
{
"version": "v1",
"created": "Sun, 20 Aug 2000 01:39:54 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Woodley",
"M. D.",
"",
"SLAC, Stanford, CA, USA"
],
[
"Emma",
"P. E.",
"",
"SLAC, Stanford, CA, USA"
]
] |
physics/0008195
|
Andrei Seryi
|
Andrei Seryi
|
Investigations of Slow Motions of the SLAC Linac Tunnel
|
Submitted to XX International Linac Conference
|
eConf C000821 (2000) MOA11
| null |
moa11
|
physics.acc-ph
| null |
Investigations of slow transverse motion of the linac tunnel of the Stanford
Linear Collider have been performed over period of about one month in December
1999 -- January 2000. The linac laser alignment system, equipped with a
quadrant photodetector, allowed submicron resolution measurement of the motion
of the middle of the linac tunnel with respect to its ends. Measurements
revealed two major sources responsible for the observed relative motion.
Variation of the external atmospheric pressure was found to be the most
significant cause of short wavelength transverse motion of the tunnel. The long
wavelength component of the motion has been also observed to have a large
contribution from tidal effects. The measured data are essential for
determination of parameters for the Next Linear Collider.
|
[
{
"version": "v1",
"created": "Sun, 20 Aug 2000 00:40:39 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Seryi",
"Andrei",
""
]
] |
physics/0008196
|
Ji Qiang
|
Ji Qiang and Salman Habib
|
A Second-Order Stochastic Leap-Frog Algorithm for Langevin Simulation
|
3 pages, 4 figures, to submit to XX International LINAC conference
|
eConf C000821 (2000) MOA20
| null | null |
physics.acc-ph
| null |
Langevin simulation provides an effective way to study collisional effects in
beams by reducing the six-dimensional Fokker-Planck equation to a group of
stochastic ordinary differential equations. These resulting equations usually
have multiplicative noise since the diffusion coefficients in these equations
are functions of position and time. Conventional algorithms, e.g. Euler and
Heun, give only first order convergence of moments in a finite time interval.
In this paper, a stochastic leap-frog algorithm for the numerical integration
of Langevin stochastic differential equations with multiplicative noise is
proposed and tested. The algorithm has a second-order convergence of moments in
a finite time interval and requires the sampling of only one uniformly
distributed random variable per time step. As an example, we apply the new
algorithm to the study of a mechanical oscillator with multiplicative noise.
|
[
{
"version": "v1",
"created": "Sun, 20 Aug 2000 03:53:09 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Qiang",
"Ji",
""
],
[
"Habib",
"Salman",
""
]
] |
physics/0008197
|
Chris Adolphsen
|
C. Adolphsen (1), W. Baumgartner (1), K. Jobe (1), R. Loewen (1), D.
McCormick (1), M. Ross (1), T. Smith (1), J.W. Wang (1) and T. Higo (2) ((1)
SLAC (2) KEK)
|
RF Processing of X-band Accelerator Structures at the NLCTA
|
Submitted to LINAC 2000: Paper ID = TUE01
|
eConf C000821 (2000) TUE01
| null |
SLAC-PUB-8573
|
physics.acc-ph
| null |
During the initial phase of operation, the linacs of the Next Linear Collider
(NLC) will contain roughly 5000 X-Band accelerator structures that will
accelerate beams of electrons and positrons to 250 GeV. These structures will
nominally operate at an unloaded gradient of 72 MV/m. As part of the NLC R&D
program, several prototype structures have been built and operated at the Next
Linear Collider Test Accelerator (NLCTA) at SLAC. Here, the effect of high
gradient operation on the structure performance has been studied. Significant
progress was made during the past year after the NLCTA power sources were
upgraded to reliably produce the required NLC power levels and beyond. This
paper describes the structures, the processing methodology and the observed
effects of high gradient operation.
|
[
{
"version": "v1",
"created": "Sun, 20 Aug 2000 04:34:46 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Adolphsen",
"C.",
""
],
[
"Baumgartner",
"W.",
""
],
[
"Jobe",
"K.",
""
],
[
"Loewen",
"R.",
""
],
[
"McCormick",
"D.",
""
],
[
"Ross",
"M.",
""
],
[
"Smith",
"T.",
""
],
[
"Wang",
"J. W.",
""
],
[
"Higo",
"T.",
""
]
] |
physics/0008200
|
Michael Zeitlin
|
Antonina N. Fedorova, Michael G. Zeitlin
|
Multiresolution Representations for Solutions of Vlasov-Maxwell-Poisson
Equations
|
3 pages, 2 figures, JAC2000.cls, presented at LINAC2000, paper MOE15
|
eConf C000821 (2000) MOE15
| null | null |
physics.acc-ph math-ph math.MP nlin.PS physics.comp-ph
| null |
We present the applications of variational-wavelet approach for computing
multiresolution/multiscale representation for solution of some approximations
of Vlasov-Maxwell-Poisson equations.
|
[
{
"version": "v1",
"created": "Sun, 20 Aug 2000 13:12:29 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Fedorova",
"Antonina N.",
""
],
[
"Zeitlin",
"Michael G.",
""
]
] |
physics/0008201
|
Cho Ng
|
N. M. Kroll, C.-K. Ng and D. C. Vier
|
Applications of Time Domain Simulation to Coupler Design for Periodic
Structures
|
3 pages, 4 figures, LINAC Conference 2000
|
eConf C000821 (2000) TUE04
| null | null |
physics.acc-ph
| null |
We present numerical procedures for analyzing the properties of periodic
structures and associated couplers based upon time domain simulation. Simple
post processing procedures are given for determining Brillouin diagrams and
complex field distributions of the traveling wave solutions, and the reflection
coefficient of the traveling waves by the input and output. The availability of
the reflection coefficient information facilitates a systematic and efficient
procedure for matching the input and output. The method has been extensively
applied to coupler design for a wide variety of structures and to a study
directed towards elimination of the surface field enhancement commonly
experienced in coupler cells.
|
[
{
"version": "v1",
"created": "Sun, 20 Aug 2000 16:40:45 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Kroll",
"N. M.",
""
],
[
"Ng",
"C. -K.",
""
],
[
"Vier",
"D. C.",
""
]
] |
physics/0008204
|
Sami G. Tantawi
|
Sami G. Tantawi
|
New Development in RF Pulse Compression
|
5 pages, 6 figures, Linac 2000, file name:we203b.pdf
|
eConf C000821 (2000) WE203
| null |
SLAC-PUB-8582
|
physics.acc-ph
| null |
Several pulse compression systems have been proposed for future linear
collider. Most of these systems require hundreds of kilometers of low-loss
waveguide runs. To reduce the waveguide length and improve the efficiency of
these systems, components for multimoding, active switches and non-reciprocal
elements are being developed. In the multimoded systems a waveguide is utilized
several times by sending different signals over different modes. The multimoded
components needed for these systems have to be able to handle hundreds of
megawatts of rf power at the X-band frequency and above. Consequently, most of
these components are overmoded. We present the development of multimoded
components required for such systems. We also present the development efforts
towards overmoded active component such as switches and overmoded
non-reciprocal components such as circulators and isolators.
|
[
{
"version": "v1",
"created": "Sun, 20 Aug 2000 22:44:05 GMT"
},
{
"version": "v2",
"created": "Sun, 1 Oct 2000 21:41:19 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Tantawi",
"Sami G.",
""
]
] |
physics/0008205
|
Karl Bane
|
K. L. F. Bane and V. V. Stupakov
|
Impedance of a Beam Tube with Small Corrugations
|
3 pages, 4 figures, for LINAC2000 paper MOA21
|
eConf C000821 (2000) MOA21
| null | null |
physics.acc-ph
| null |
In accelerator projects involving the use of very short bunches, such as the
Linac Coherent Light Source (LCLS)-where the rms bunch length in the undulator
section is 30 micron-, it appears that even submicron imperfections in the beam
tube surface can generate an impedance that is unacceptably large. We consider
two periodic models of an imperfect, rough surface, one with small rectangular
corrugations, the other with smooth sinusoidal oscillations. We compare the
impedance of these two models.
|
[
{
"version": "v1",
"created": "Sun, 20 Aug 2000 23:01:03 GMT"
},
{
"version": "v2",
"created": "Mon, 28 Aug 2000 20:12:27 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Bane",
"K. L. F.",
""
],
[
"Stupakov",
"V. V.",
""
]
] |
physics/0008206
|
Michael J. Fitch
|
M. J. Fitch, A. C. Melissinos, N. Barov, J.-P. Carneiro, H. T.
Edwards, W. H. Hartung
|
Compression of High-Charge Electron Bunches
|
3 pages, 5 figures, LINAC2000 MOB16, LaTeX2e
|
eConf C000821 (2000) MOB16
| null | null |
physics.acc-ph
| null |
The A0 Photoinjector at Fermilab can produce high charge (10-14 nC) electron
bunches of low emittance (20 pi mm-mrad for 12 nC). We have undertaken a study
of the optimal compression conditions. Off-crest acceleration in the 9-cell
capture cavity induces an energy-time correlation, which is rotated by the
compressor chicane (4 dipoles). The bunch length is measured using streak
camera images of optical transition radiation. We present measurements under
various conditions, including the effect of the laser pulse length (2 ps sigma
Gaussian vs. 10 ps FWHM flat top). The best compression to date is for a 13.2
nC bunch with sigma = 0.63 mm (1.89 ps), which corresponds to a peak current of
2.8 kA.
|
[
{
"version": "v1",
"created": "Mon, 21 Aug 2000 00:12:22 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Fitch",
"M. J.",
""
],
[
"Melissinos",
"A. C.",
""
],
[
"Barov",
"N.",
""
],
[
"Carneiro",
"J. -P.",
""
],
[
"Edwards",
"H. T.",
""
],
[
"Hartung",
"W. H.",
""
]
] |
physics/0008207
|
Michael J. Fitch
|
M. J. Fitch, A. C. Melissinos, P. L. Colestock, J.-P. Carneiro, H. T.
Edwards, W. H. Hartung
|
Electro-Optic Sampling of Transient Fields from the passage of
High-Charge Electron Bunches
|
3 pages, 5 figures, LINAC2000 MOC05, LaTeX2e
|
eConf C000821 (2000) MOc05
| null | null |
physics.acc-ph physics.ins-det
| null |
When a relativistic electron bunch traverses a structure, strong electric
fields are induced in its wake. We present measurements of the electric field
as a function of time as measured at a fixed location in the beam line. For a
12 nC bunch of duration 4.2 ps FWHM, the peak field is measured >0.5 MV/m. Time
resolution of ~5 ps is achieved using electro-optic sampling with a lithium
tantalate (LiTaO_3) crystal and a short-pulse infrared laser synchronized to
the beam. We present measurements under several different experimental
conditions and discuss the influence of mode excitation in the structure.
|
[
{
"version": "v1",
"created": "Mon, 21 Aug 2000 00:32:16 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Fitch",
"M. J.",
""
],
[
"Melissinos",
"A. C.",
""
],
[
"Colestock",
"P. L.",
""
],
[
"Carneiro",
"J. -P.",
""
],
[
"Edwards",
"H. T.",
""
],
[
"Hartung",
"W. H.",
""
]
] |
physics/0008208
|
Sang-ho Kim
|
Sang-ho Kim, Marc Doleans, Yoon Kang
|
Efficient Design Scheme of Superconducting Cavity
|
LINAC2000, THD09
|
eConf C000821 (2000) THD09
| null | null |
physics.acc-ph
| null |
For many next-generation high intensity proton accelerator applications
including the Spallation Neutron Source (SNS), superconducting (SC) RF provides
the technology of choice for the linac. In designing the superconducting
cavity, several features, such as peak fields, inter-cell coupling, mechanical
stiffness, field flatness, external Q, manufacturability, shunt impedance,
higher order mode (HOM), etc., should be considered together. A systematic
approach to determine the optimum cavity shape by exploring the entire
geometric space of the cavity has been found. The most efficient use of RF
energy can be accomplished by adjusting the cell shape. A small region in
parameter space satisfying all reasonable design criteria has been found. With
this design procedure, choosing the optimum shape is simplified. In this paper,
the whole design procedure of this optimisation scheme is explained and applied
to the SNS cavity design.
|
[
{
"version": "v1",
"created": "Mon, 21 Aug 2000 15:00:32 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Kim",
"Sang-ho",
""
],
[
"Doleans",
"Marc",
""
],
[
"Kang",
"Yoon",
""
]
] |
physics/0008209
|
Dale L. Schrage
|
Dale L. Schrage
|
Structural Analysis of Superconducting Accelerator Cavities
|
LINAC 2000 THD07
|
eConf C000821 (2000) THD07
| null | null |
physics.acc-ph
| null |
The static and dynamic structural behavior of superconducting cavities for
various projects was determined by finite element structural analysis. The b =
0.61 cavity shape for the Neutron Science Project was studied in detail and
found to meet all design requirements if fabricated from five millimeter thick
material with a single annular stiffener. This 600 MHz cavity will have a
Lorentz coefficient of -1.8 Hz/(Mv/meter)2 and a lowest structural resonance of
more than 100 Hz. Cavities at b = 0.48, 0.61, and 0.77 were analyzed for a
Neutron Science Project concept which would incorporate 7-cell cavities. The
medium and high beta cavities were found to meet all criteria but it was not
possible to generate a b = 0.48 cavity with a Lorentz coefficient of less than
-3 Hz/(Mv/meter) 2.
|
[
{
"version": "v1",
"created": "Mon, 21 Aug 2000 16:19:36 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Schrage",
"Dale L.",
""
]
] |
physics/0008210
|
Roger L. Poirier
|
R. L. Poirier, R. Baartman, P. Bricault, K. Fong, S. Koscielniak, R.
Laxdal, A. K. Mitra, L. Root, G. Stanford, D. Pearce
|
CW Performance of the Triumf 8 Meter Long RFQ for Exotic Ions
|
LINAC2000 FR102
|
eConf C000821 (2000) FR102
| null | null |
physics.acc-ph
| null |
The ISAC 35 MHz RFQ is designed to accelerate ions of A/q up to 30 from
2keV/u to 150keV/u in cw mode. The RFQ structure is 8 meters long and the
vane-shaped rods are supported by 19 rings spaced 40 cm apart. An unusual
feature of the design is the constant synchronous phase of -25; the buncher and
shaper sections are eliminated in favor of an external multi-harmonic buncher.
All 19 rings are installed with quadrature positioning of the four rod
electrodes aligned to +/- 0.08 mm. Relative field variation and quadruple
asymmetry along the 8 meters of the RFQ was measured to be within +/- 1%. Early
operation at peak inter-electrode voltage (75kV) was restricted by the rapid
growth of dark currents due to field emission; the nominal operating power of
75 kW increased to 100 kW in a few hours. A program of high power pulsing,
followed by cw operation have all but eliminated the problem leading to a
successful 150 hour test at full power. Successful beam test results confirm
beam dynamics and rf designs.
|
[
{
"version": "v1",
"created": "Tue, 22 Aug 2000 00:13:19 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Poirier",
"R. L.",
""
],
[
"Baartman",
"R.",
""
],
[
"Bricault",
"P.",
""
],
[
"Fong",
"K.",
""
],
[
"Koscielniak",
"S.",
""
],
[
"Laxdal",
"R.",
""
],
[
"Mitra",
"A. K.",
""
],
[
"Root",
"L.",
""
],
[
"Stanford",
"G.",
""
],
[
"Pearce",
"D.",
""
]
] |
physics/0008212
|
Robert L. Kustom
|
Robert L. Kustom
|
An Overview of the Spallation Neutron Source Project
|
LINAC2000 conference TU101
|
eConf C000821 (2000) TU101
| null | null |
physics.acc-ph
| null |
The Spallation Neutron Source (SNS) is being designed, constructed, installed
and commissioned by the staff of six national laboratories, Argonne National
Laboratory, Brookhaven National Laboratory, Jefferson National Accelerator
Laboratory, Lawrence Berkeley National Laboratory, Los Alamos National
Laboratory, and Oak Ridge National Laboratory. The accelerator systems are
designed to deliver a 695 ns proton-pulse onto a mercury target at a 60-Hz
repetition rate and an average power of 2-MW. Neutron moderators that will
convert the spallation neutrons into slow neutrons for material science
research will surround the target. The Front-End systems are designed to
generate an H- beam of minipulses, 68% beam on, 32% beam off every 965 ns, at
2.5 MeV for 1 ms, 60 times a second. The Front-End systems include a RF driven,
volume-production ion source, beam chopping system, RFQ, and beam transport.
The ion source will have to achieve about 65 mA to deliver 52 mA at the input
to the linac. The linac consists of a drift tube linac up to 86.8 MeV, a
coupled-cell linac to 185 MeV, and a superconducting RF linac to the nominal
energy of 1 GeV. The design of the superconducting section includes 11
cryomodules with three, 0.61-beta cavities per cryomodule and 17 cryomodules
with four, 0.81-beta cavities per cryomodule, with space to install four more
0.81-beta cryomodules. The accumulator ring is designed for charge exchange
injection at full energy. The peak charge per bunch at the end of the
accumulation cycle will reach 2.08x10**14 for 2-MW operation. The goal is to
control beam losses to less than 1x10**-4.
|
[
{
"version": "v1",
"created": "Tue, 22 Aug 2000 18:05:19 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Kustom",
"Robert L.",
""
]
] |
physics/0008213
|
Amiya K. Mitra
|
A.K. Mitra, R.L. Poirier, R.E. Laxdal
|
Design of 11.8 MHZ Buncher for Isac at Triumf
|
LINAC2000 conference: THD15
|
eConf C000821 (2000) THD15
| null | null |
physics.acc-ph
| null |
The high energy beam transport (HEBT) line for the ISAC radioactive beam
facility at TRIUMF requires an 11.8 MHz buncher. The main requirements of the
buncher are to operate in cw mode with a velocity acceptance of 2.2% and an
effective voltage of 100 kV, which for a three gap buncher gives a drift tube
voltage of 30 kV. A lumped element circuit is more suitable than a distributed
rf structure for this low frequency of operation. The resonant frequency of
11.8 MHz is obtained by an inductive coil in parallel with the capacitance of
the drift tube. The coil is housed in a dust free box at atmospheric pressure
whereas the drift tube is placed in a vacuum chamber and an rf feedthrough
connects them. Two design of this feedthrough, one using disk and one using
tubular ceramics, operating at 30 kV rf, are described in this paper. MAFIA and
SUPERFISH codes are used to simulate the fields in the feedthroughs,
particularly around the ceramic metal interfaces. Test results of the prototype
feedthroughs are presented and the choice of the proposed final solution is
outlined.
|
[
{
"version": "v1",
"created": "Tue, 22 Aug 2000 18:21:49 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Mitra",
"A. K.",
""
],
[
"Poirier",
"R. L.",
""
],
[
"Laxdal",
"R. E.",
""
]
] |
physics/0008214
|
Sorina Lazanu
|
Ionel Lazanu and Sorina Lazanu
|
Predictions about the behaviour of diamond, silicon, SiC and some AIIIBV
semiconductor materials in hadron fields
|
12 pages, 7 figures, submitted to Radiation Measurements
| null | null | null |
physics.ins-det astro-ph cond-mat.mtrl-sci hep-ex
| null |
The utilisation of crystalline semiconductor materials as detectors and
devices operating in high radiation environments, at the future particle
colliders, in space applications, in medicine and industry, makes necessary to
obtain radiation harder materials. Diamond, SiC and different AIIIBV compounds
(GaAs, GaP, InP, InAs, InSb) are possible competitors for silicon to different
electronic devices for the up-mentioned applications. The main goal of this
paper is to give theoretical predictions about the behaviour of these
semiconductors in hadron fields (pions, protons). The effects of the
interaction between the incident particle and the semiconductor are
characterised in the present paper both from the point of view of the
projectile, the relevant quantity being the energy loss by nuclear
interactions, and of the target, using the concentration of primary radiation
induced defects on unit particle fluence. Some predictions about the damage
induced by hadrons in these materials in possible applications in particle
physics and space experiments are done.
|
[
{
"version": "v1",
"created": "Wed, 23 Aug 2000 07:32:16 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Lazanu",
"Ionel",
""
],
[
"Lazanu",
"Sorina",
""
]
] |
physics/0008215
|
Savely G. Karshenboim
|
Savely G. Karshenboim (.I. Mendeleev Institute for Metrology, St.
Petersburg, and Max-Planck-Institut fuer Quantenoptik, Garching)
|
Laser spectroscopy of simple atoms and precision tests of bound state
QED
|
10 pages, 8 figures, invited talk at 3rd Simposium on Modern Problems
of Laser Physics (Novosibirsk, 2000)
|
Laser Phys. 11 (2001) 1083-1087
| null | null |
physics.atom-ph hep-ph
| null |
We present a brief overview of precision tests of bound state QED and mainly
pay our attention to laser spectroscopy as an appropriate tool for these tests.
We particularly consider different precision tests of bound state QED theory
based on the laser spectroscopy of optical transitions in hydrogen, muonium and
positronium and related experiments.
|
[
{
"version": "v1",
"created": "Wed, 23 Aug 2000 14:13:41 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Karshenboim",
"Savely G.",
"",
".I. Mendeleev Institute for Metrology, St.\n Petersburg, and Max-Planck-Institut fuer Quantenoptik, Garching"
]
] |
physics/0008216
|
Ina Reichel
|
I. Reichel, Y. Cai
|
New Method of Dispersion Correction in the Pep-II Low Energy Ring
|
2 pages, 2 figures, LaTeX, poster at EPAC 2000
| null | null |
SLAC-PUB-8592
|
physics.acc-ph
| null |
The sextupole magnets in the Low Energy Ring (LER) of PEP-II are grouped in
pairs with a phase advance of 180 degrees. Displacing the magnets or moving the
orbit to displace the beam in the magnets in an antisymmetric way creates a
dispersion wave around the ring. This can be used to correct the vertical
dispersion in LER without changing the local coupling. Results from simulations
are shown.
|
[
{
"version": "v1",
"created": "Wed, 23 Aug 2000 17:17:32 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Reichel",
"I.",
""
],
[
"Cai",
"Y.",
""
]
] |
physics/0008218
|
Yoshihisa Iwashita
|
H. Ao, Y. Iwashita, T. Shirai and A. Noda, M. Inoue, T. Kawakita, K.
Ohkubo and K. Nakanishi
|
High Power Model Fabrication of Biperiodic L-Support Disk-and-Washer
Structure
|
3 pages Linac2000 Poster TUA22 (5 figures available from author)
|
eConf C000821 (2000) TUA22
| null | null |
physics.acc-ph
| null |
The high power test model of biperiodic L-support disk-and- washer was
fabricated. Among some trouble in the fabrication, the main one was a vacuum
leak in a brazing process. The repair test of the leak showed a good result;
four units were recovered out of five leak units (recover rate 80%). While an
accelerating mode frequency was tuned at an operating frequency of 2857 MHz by
squeezing method, a coupling mode frequency of 2847MHz and the 3.4% field
flatness (peak to peak ratio) were achieved.
|
[
{
"version": "v1",
"created": "Wed, 23 Aug 2000 19:54:58 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Ao",
"H.",
""
],
[
"Iwashita",
"Y.",
""
],
[
"Shirai",
"T.",
""
],
[
"Noda",
"A.",
""
],
[
"Inoue",
"M.",
""
],
[
"Kawakita",
"T.",
""
],
[
"Ohkubo",
"K.",
""
],
[
"Nakanishi",
"K.",
""
]
] |
physics/0008219
|
Shinya Watanabe
|
Shinya Watanabe (1), Vachtang Putkaradze (2), Tomas Bohr (3) ((1)
Dept. of Mathematical Sciences, Ibaraki University, (2) Dept. of Mathematics
& Statistics, University of New Mexico, (3) Dept. of Physics, The Technical
University of Denmark)
|
Integral methods for shallow free-surface flows with separation
|
46 pages, latex 2.09, 10 PS figures included with psfig
| null | null | null |
physics.flu-dyn nlin.PS
| null |
We study laminar thin film flows with large distortions in the free surface
using the method of averaging across the flow. Two concrete problems are
studied: the circular hydraulic jump and the flow down an inclined plane. For
the circular hydraulic jump our method is able to handle an internal eddy and
separated flow. Assuming a variable radial velocity profile like in
Karman-Pohlhausen's method, we obtain a system of two ordinary differential
equations for stationary states that can smoothly go through the jump where
previous studies encountered a singularity. Solutions of the system are in good
agreement with experiments. For the flow down an inclined plane we take a
similar approach and derive a simple model in which the velocity profile is not
restricted to a parabolic or self-similar form. Two types of solutions with
large surface distortions are found: solitary, kink-like propagating fronts,
obtained when the flow rate is suddenly changed, and stationary jumps,
obtained, e.g., behind a sluice gate. We then include time-dependence in the
model to study stability of these waves. This allows us to distinguish between
sub- and supercritical flows by calculating dispersion relations for
wavelengths of the order of the width of the layer.
|
[
{
"version": "v1",
"created": "Thu, 24 Aug 2000 14:12:32 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Watanabe",
"Shinya",
""
],
[
"Putkaradze",
"Vachtang",
""
],
[
"Bohr",
"Tomas",
""
]
] |
physics/0008222
|
Alex Granik
|
C. Castro and A. Granik
|
P-Loop Oscillator on Clifford Manifolds and Black Hole Entropy
|
14 pages
| null | null | null |
physics.gen-ph
| null |
A new relativity theory, or more concretely an extended relativity theory,
actively developed by one of the authors incorporated 3 basic concepts. They
are the old idea of Chew about bootstrapping, Nottale's scale relativity, and
enlargement of the conventional time-space by inclusion of noncommutative
Clifford manifolds where all p-branes are treated on equal footing. The latter
allowed one to write a master action functional. The resulting functional
equation is simplified and applied to the p-loop oscillator. Its respective
solution is a generalization of the conventional point oscillator. In addition
, it exhibits some novel features: an emergence of two explicit scales
delineating the asymptotic regimes (Planck scale region and a smooth region of
a conventional point oscillator). In the most interesting Planck scale regime,
the solution reproduces in an elementary fashion the basic relations of string
theory (including string tension quantization). In addition, it is shown that
comparing the massive (super) string degeneracy with the p-loop degeneracy one
is arriving at the proportionality between the Shannon entropy of a p-loop
oscillator in D-dimensional space and the Bekenstein-Hawking entropy of the
black hole of a size comparable with a string scale.
|
[
{
"version": "v1",
"created": "Thu, 24 Aug 2000 19:57:11 GMT"
},
{
"version": "v2",
"created": "Tue, 12 Sep 2000 15:54:09 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Castro",
"C.",
""
],
[
"Granik",
"A.",
""
]
] |
physics/0008223
|
Anatol Sorokin
|
A.L.Sorokin
|
New complex variables for equations of ideal barotropic fluid
|
Draft version. LaTeX2e. Comments are welcome
| null | null | null |
physics.flu-dyn
| null |
We propose new construction of dependent variables for equations of an ideal
barotropic fluid. This construction is based on a direct generalization of the
known connection between Schroedinger equation and a system of Euler-type
equations. The system for two complex-valued functions is derived that is
equivalent to Euler equations. Possible advantages of the proposed formulation
are discussed.
|
[
{
"version": "v1",
"created": "Fri, 25 Aug 2000 07:06:14 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Sorokin",
"A. L.",
""
]
] |
physics/0008224
|
Howard A. Smith
|
Howard A. Smith
|
Challenges in Affecting U.S. Attitudes Towards Space Science
|
to appear in "Advances in Space Research: Proceedings of the
COSPAR-2000 Warsaw Symposium on 'The Public Understanding of Space Science'",
Elsevier Science, Oxford, UK, 2000
| null | null |
CfA Preprint No.4911
|
physics.soc-ph physics.ed-ph
| null |
Space Science enjoys broad public support in the US. People say they follow
developments with interest, and that the programs are worth their cost. This
attitude seems to arise in part because of the intrinsic accessibility and
appeal of the subject matter. Yet at the same time the public is often
disturbingly ignorant about basic facts. In this article I summarize recent
survey results, including attitudes towards basic research, and also consider
some of the criticisms of the polling methods. I argue that the results imply
vigorous and innovative education and outreach programs can and should be made
even more effective -- but that the consequences of success for Space Science
research itself are not obvious. I outline two popular education programs which
address some of the new challenges facing Space Science outreach.
|
[
{
"version": "v1",
"created": "Fri, 25 Aug 2000 17:50:47 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Smith",
"Howard A.",
""
]
] |
physics/0008227
|
Kirk T. McDonald
|
Alexander J. McDonald, Kirk T. McDonald
|
The Rolling Motion of a Disk on a Horizontal Plane
|
v2 adds experimental data on the role of friction at small angles,
and adds several references. Thanks to A. Chatterjee, C. Gray and A. Ruina v3
adds discussion of the case of zero friction; thanks to Martin Olsson
| null | null | null |
physics.class-ph
| null |
Recent interest in the old problem of the motion of a coin spinning on a
tabletop has focused on mechanisms of dissipation of energy as the angle alpha
of the coin to the table decreases, while the angular velocity Omega of the
point of contact increases. Following a review of the general equations of
motion of a thin disk rolling without slipping on a horizontal surface, we
present results of simple experiment on the time dependence of the motion that
indicate the dominant dissipative power loss to be proportional to the Omega^2
up to and including the last observable cycle.
|
[
{
"version": "v1",
"created": "Mon, 28 Aug 2000 05:30:04 GMT"
},
{
"version": "v2",
"created": "Sun, 7 Jan 2001 21:31:03 GMT"
},
{
"version": "v3",
"created": "Fri, 5 Apr 2002 14:17:14 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"McDonald",
"Alexander J.",
""
],
[
"McDonald",
"Kirk T.",
""
]
] |
physics/0008228
|
John Michael Williams
|
John Michael Williams
|
Entropy Shows that Global Warming Should Cause Increased Variability in
the Weather
|
v. 1.6 is slightly reformatted & refs. updated. 1.61 fixes ref error
| null | null | null |
physics.gen-ph
| null |
Elementary physical reasoning seems to leave it inevitable that global
warming would increase the variability of the weather. The first two terms in
an approximation to the global entropy are used to show that global warming has
increased the free energy available to drive the weather, and that the variance
of the weather should increase correspondingly.
|
[
{
"version": "v1",
"created": "Mon, 28 Aug 2000 06:11:59 GMT"
},
{
"version": "v2",
"created": "Wed, 21 Feb 2001 22:53:31 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Williams",
"John Michael",
""
]
] |
physics/0008229
|
Jean Reignier
|
J. Reignier
|
The birth of special relativity. "One more essay on the subject"
|
31 pages
| null | null | null |
physics.hist-ph
| null |
Special relativity was discovered at the eve of the century, but finds its
roots in the 19th century efforts to understand the optics and electromagnetism
of moving bodies. These roots are reviewed in Parts 1 and 2, the latter being
specially devoted to the works of Lorentz and of Poincare up to 1904. Part 3
contains a detailed comparison of the works of Einstein and of Poincare in
1905. It is shown that both authors succeeded in constructing a coherent and
fully relativistic theory, although their ideas about the ether were radically
different. In Part 4, the question of the respective merits of the three
potential fathers of special relativity (i.e. Lorentz, Poincare, Einstein) is
discussed again, at the light of the preceding analysis and of the "post-1905"
developments of the theory.
|
[
{
"version": "v1",
"created": "Mon, 28 Aug 2000 14:26:52 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Reignier",
"J.",
""
]
] |
physics/0008231
|
Steven Duplij
|
Diana Duplij and Steven Duplij
|
Purine-pyrimidine symmetry, determinative degree and DNA
|
8 pages, Latex 2e, amsmath, amssymb
| null | null | null |
physics.bio-ph math-ph math.MP q-bio.GN
| null |
Various symmetries connected with purine-pyrimidine content of DNA sequences
are studied in terms of the intruduced determinative degree, a new
characteristics of nucleotide which is connected with codon usage. A
numerological explanation of CG pressure is proposed. A classification of DNA
sequences is given. Calculations with real sequences show that
purine-pyrimidine symmetry increases with growing of organization. A new small
parameter which characterizes the purine-pyrimidine symmetry breaking is
proposed for the DNA theory.
|
[
{
"version": "v1",
"created": "Mon, 28 Aug 2000 22:39:58 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Duplij",
"Diana",
""
],
[
"Duplij",
"Steven",
""
]
] |
physics/0008234
|
Gennadii Kotel'nikov
|
G. A. Kotel'nikov (RRC "Kurchatov Institute", Moscow, Russia)
|
On the Possibility of Local SR Construction
|
13 pages, LaTeX, Report at the VI International Conference "Modern
Problems of Natural Science", S.-Petersburg, Russia, August 21-25, 2000
|
Journal of Russian Laser Research, 22 (2001) 455-474
| null |
IAE-6181/1
|
physics.class-ph astro-ph
| null |
The violation of the invariance of the speed of light in Special Relativity
has been made. The version of the theory (LSR) has been constructed in which
the possibility of the superluminal motions are permitted. Some predictions of
this theory are available for experimental check, for example, the measurements
of aberration angles, the observation of distinctions between the redshifts in
radio and optical ranges of a spectrum, the detection of superluminal objects
in astrophysics and in time-flight experiments.
|
[
{
"version": "v1",
"created": "Tue, 29 Aug 2000 13:02:16 GMT"
},
{
"version": "v2",
"created": "Wed, 30 Aug 2000 06:58:36 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Kotel'nikov",
"G. A.",
"",
"RRC \"Kurchatov Institute\", Moscow, Russia"
]
] |
physics/0008237
|
Valery A. Dolgashev
|
C. Adolphsen, K.L.F. Bane, V.A. Dolgashev, K. Ko, Z. Li, R. Miller
(SLAC, Stanford, CA, USA)
|
Higher Dipole Bands in the NLC Accelerating Structure
|
3 pages, 7 figures, submitted to LINAC2000 as TUA18, 21-28 August,
Monterey, CA
|
eConf C000821 (2000) TUA18
| null | null |
physics.acc-ph
| null |
We show that scattering matrix calculations for dipole modes between 23-43
GHz for the 206 cell detuned structure (DS) are consistent with finite element
calculations and results of the uncoupled model. In particular, the rms sum
wake for these bands is comparable to that of the first dipole band.
We also show that for RDDS1 uncoupled wakefield calculations for higher bands
are consistent with measurements. In particular, a clear 26 GHz signal in the
short range wake is found in both results.
|
[
{
"version": "v1",
"created": "Wed, 30 Aug 2000 03:16:10 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Adolphsen",
"C.",
"",
"SLAC, Stanford, CA, USA"
],
[
"Bane",
"K. L. F.",
"",
"SLAC, Stanford, CA, USA"
],
[
"Dolgashev",
"V. A.",
"",
"SLAC, Stanford, CA, USA"
],
[
"Ko",
"K.",
"",
"SLAC, Stanford, CA, USA"
],
[
"Li",
"Z.",
"",
"SLAC, Stanford, CA, USA"
],
[
"Miller",
"R.",
"",
"SLAC, Stanford, CA, USA"
]
] |
physics/0008238
|
Yuichi Togashi
|
Yuichi Togashi, Kunihiko Kaneko
|
Transitions Induced by the Discreteness of Molecules in a Small
Autocatalytic System
|
5 pages, 4 figures
|
Phys. Rev. Lett. 86, 2459 (2001)
|
10.1103/PhysRevLett.86.2459
| null |
physics.bio-ph cond-mat.stat-mech nlin.AO q-bio.SC
| null |
Autocatalytic reaction system with a small number of molecules is studied
numerically by stochastic particle simulations. A novel state due to
fluctuation and discreteness in molecular numbers is found, characterized as
extinction of molecule species alternately in the autocatalytic reaction loop.
Phase transition to this state with the change of the system size and flow is
studied, while a single-molecule switch of the molecule distributions is
reported. Relevance of the results to intracellular processes are briefly
discussed.
|
[
{
"version": "v1",
"created": "Wed, 30 Aug 2000 07:38:04 GMT"
},
{
"version": "v2",
"created": "Tue, 10 Dec 2002 11:06:35 GMT"
}
] | 2007-05-23T00:00:00 |
[
[
"Togashi",
"Yuichi",
""
],
[
"Kaneko",
"Kunihiko",
""
]
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.